Regulating Mo-based alloy-oxide active interfaces for efficient alkaline hydrogen evolution assisted by hydrazine oxidation

Improving the efficiency of overall water splitting (OWS) is crucial due to the slow four-electron transfer process in the oxygen evolution reaction (OER). The coupling of the thermodynamically favorable hydrazine oxidation reaction (HzOR) with the hydrogen evolution reaction (HER) significantly boosts hydrogen production. A Ru-decorated MoNi/MoO2 micropillar (Ru-MoNi/MoO2) has been synthesized using a hydrothermal followed by reduction annealing. Benefiting from Ru moderating the active interface of Mo-based alloys/oxides and the unique one-dimensional micropillar morphology. The synthesized Ru-MoNi/MoO2 exhibits outstanding bifunctional activity for HER and HzOR, achieving 10 mA cm-2 at merely -13 mV and -34 mV in 1 M KOH and 1 M KOH + 0.5 M N2H4, respectively. Notably, with Ru-MoNi/MoO2 in a dual-electrode setup, only 0.57 V is needed to achieve 50 mA cm-2, demonstrating good stability and facilitating hydrazine-assisted water splitting (OHzS). This work offers insights into the modulation of alloy/metal oxide active interfaces, contributing to the development of efficient bifunctional catalysts for HER and HzOR.

Confined growth of Ultrathin, nanometer-sized FeOOH/CoP heterojunction nanosheet arrays as efficient self-supported electrode for oxygen evolution reaction

Self-supported electrodes, featuring abundant active species and rapid mass transfer, are promising for practical applications in water electrolysis. However, constructing efficient self-supported electrodes with a strong affinity between the catalytic components and the substrate is of great challenge. In this study, by combining the ideas of in-situ construction and space-confined growth, we designed a novel self-supported FeOOH/cobalt phosphide (CoP) heterojunctions grown on a carefully modified commercial Ni foam (NF) with three-dimensional (3D) hierarchically porous Ni skeleton (FeOOH/CoP/3D NF). The specific porous structure of 3D NF directs the confined growth of FeOOH/CoP catalyst into ultra-thin and small-sized nanosheet arrays with abundant edge active sites. The active FeOOH/CoP component is stably anchored on the rough pore wall of 3D NF support, leading to superior stability and improved conductivity. These structural advantages contributed to a highly facilitated oxygen evolution reaction (OER) activity and enhanced durability of the FeOOH/CoP/3D NF electrode. Herein, the FeOOH/CoP/3D NF electrode afforded a low overpotential of 234 mV at 10 mA cm-2 (41 mV smaller than FeOOH/CoP grown on unmodified Ni foam) and high stability for over 90 h, which is among the top reported OER catalysts. Our study provides an effective idea and technique for the construction of active and robust self-supported electrodes for water electrolysis.

Controllable synthesis of a hybrid mesoporous sheets-like Fe0.5NiS2@ P, N-doped carbon electrocatalyst for alkaline oxygen evolution reaction

Owing to the high cost of precious metal catalysts for the oxygen evolution reaction (OER), the production of highly efficient and affordable electrocatalysts is important for generating pollution-free and renewable energy via electrochemical processes. A facile hydrothermal approach was employed to synthesize hybrid mesoporous iron-nickel bimetallic sulfides @ P, N-doped carbon for the OER. The prepared Fe0.5NiS2@C exhibited an overpotential (η) of 250 mV at 10 mA/cm2. This exceeded the overpotentials recently reported for surface-modified P, N-doped carbon-based catalysts for the OER in a 1 M KOH medium. Moreover, the Fe0.5NiS2@C catalyst showed a notable Tafel slope of 90.5 mV/dec with long-dated stability even after 24 h at 10 mA/cm2. The superior OER performance of the Fe0.5NiS2@C catalysts may be due to their large surface area, sheet-like morphology with abundant active sites, fast transfer of mass and electrons, control of the electronic structure by co-treatment with heteroatoms (e.g., P and N), and the synergistic effect of bimetallic sulfides, making them favorable catalysts for the oxygen evolution reaction. Density functional theory (DFT) calculations showed that the Fe0.5NiS2@C catalyst exhibited strong H2O-adsorption energy. The enhanced OER activity of Fe0.5NiS2@C was attributed to its higher surface area, favorable H2O adsorption energy, improved electron transfer efficiency, and lower Gibbs free energy compared to those of the other proposed catalysts.

Electrochemical filtration for drinking water purification: A review on membrane materials, mechanisms and roles

Electrochemical filtration can not only enrich low concentrations of pollutants but also produce reactive oxygen species to interact with toxic pollutants with the assistance of a power supply, making it an effective strategy for drinking water purification. In addition, the application of electrochemical filtration facilitates the reduction of pretreatment procedures and the use of chemicals, which has outstanding potential for maximizing process simplicity and reducing operating costs, enabling the production of safe drinking water in smaller installations. In recent years, the research on electrochemical filtration has gradually increased, but there has been a lack of attention on its application in the removal of low concentrations of pollutants from low conductivity water. In this review, membrane substrates and electrocatalysts used to improve the performance of electrochemical membranes are briefly summarized. Meanwhile, the application prospects of emerging single-atom catalysts in electrochemical filtration are also presented. Thereafter, several electrochemical advanced oxidation processes coupled with membrane filtration are described, and the related working mechanisms and their advantages and shortcomings used in drinking water purification are illustrated. Finally, the roles of electrochemical filtration in drinking water purification are presented, and the main problems and future perspectives of electrochemical filtration in the removal of low concentration pollutants are discussed.

Hollow-structured cobalt sulfide electrocatalyst for alkaline oxygen evolution reaction: Rational tuning of electronic structure using iron and fluorine dual-doping strategy

Utilizing renewable electricity for water electrolysis offers a promising way for generating high-purity hydrogen gases while mitigating the emission of environmental pollutants. To realize the water electrolysis, it is necessary to develop highly active and precious metal-free electrocatalyst for oxygen evolution reaction (OER) which incurs significant overpotential due to its complicated four-electron transfer mechanism. Hence, we propose a facile preparation method for hollow-structured Fe and F dual-doped CoS2 nanosphere (Fe-CoS2-F) as an efficient OER electrocatalyst. The uniform hollow and porous structure of Fe-CoS2-F enlarge the specific surface area and increase the number of exposed active sites. Furthermore, the Fe and F dual-dopants synergistically contributed to the adjustment of electronic structure, thereby promoting the adsorption/desorption of oxygen-containing reaction intermediates on active sites during the alkaline OER procedure. As a result, the prepared Fe-CoS2-F exhibits outstanding OER activity, characterized by a low overpotential of 298 mV to achieve a current density of 10 mA cm-2 and a Tafel slope as small as 46.0 mV dec-1. Based on computational theoretical calculations, the introduction of the dual-dopants into CoS2 structure reduce the excessively strong adsorption energy of reaction intermediate in the rate determining step, leading to effectively promoted electrocatalytic cycle for OER in alkaline environment. This study presents an effective strategy for preparing noble metal-free OER electrocatalysts with promising potential for large-scale industrial water electrolysis.

Renewable lignin-derived heteroatom-doped porous carbon nanosheets as an efficient oxygen reduction catalyst for rechargeable zinc-air batteries

Lignin upgrading to various functional products is promising to realize high-value utilization of low-cost and renewable biomass waste, but is still in its infancy. Herein, using industry waste lignosulfonate as the biomass-based carbon source and urea as the dopant, we constructed a heteroatom-doped porous carbon nanosheet structure by a simple NaCl template-assisted pyrolytic strategy. Through the synergistic effect of the NaCl template and urea, the optimized lignin-derived porous carbon catalyst with high content of active nitrogen species and large specific surface area can be obtained. As a result, the fabricated catalysts exhibited excellent electrocatalytic oxygen reduction activity, as well as good methanol tolerance and stability, comparable to that of commercial Pt/C. Moreover, rechargeable Zn-air batteries assembled with this electrocatalyst have a peak power density of up to 150 mW cm-2 and prominent long-term cycling stability. This study offers an inexpensive and efficient way for the massive production of highly active metal-free catalysts from the plentiful, inexpensive and environmentally friendly lignin, offering a good direction for biomass waste recycling and utilization.

Adsorption of per- and poly-fluoroalkyl substances (PFAS) on Ni: A DFT investigation

Electrocatalytic destruction of per- and polyfluoroalkyl substances (PFAS) is an emerging approach for treatment of PFAS-contaminated water. In this study, a systematic ab initio investigation of PFAS adsorption on Ni, a widely used electrocatalyst, was conducted by means of dispersion-corrected Density Functional Theory (DFT) calculations. The objective of this investigation was to elucidate the adsorption characteristics and charge transfer mechanisms of different PFAS molecules on Ni surfaces. PFAS adsorption on three of the most thermodynamically favorable Ni surface facets, namely (001), (110), and (111), was investigated. Additionally, the role of PFAS chain length and functional group was studied by comparing the adsorption characteristics of different PFAS compounds, namely perfluorooctanesulfonic acid (PFOS), perfluorooctanoic acid (PFOA), perfluorobutanesulfonic acid (PFBS), and perfluorobutanoic acid (PFBA). For each PFAS molecule-Ni surface facet pair, different adsorption configurations were considered. Further calculations were carried out to reveal the effect of solvation, pre-adsorbed atomic hydrogen (H), and surface defects on the adsorption energy. Overall, the results revealed that the adsorption of PFAS on Ni surfaces is energetically favorable, and that the adsorption is primarily driven by the functional groups. The presence of preadsorbed H and the inclusion of solvation produced less exothermic adsorption energies, while surface vacancy defects showed mixed effects on PFAS adsorption. Taken together, the results of this study suggest that Ni is a promising electrocatalyst for PFAS adsorption and destruction, and that proper control for the exposed facets and surface defects could enhance the adsorption stability.

Incorporation of Ag in Co9S8-Ni3S2 for Predominantly Enhanced Electrocatalytic Activities for Oxygen Evolution Reaction: A Combined Experimental and DFT Study

Electrodeposition of abundant metals to fabricate efficient and durable electrodes play a viable role in advancing renewable electrochemical energy technologies. Herein, we deposit Co9S8-Ag-Ni3S2@NF onto nickel foam (NF) to form Co9S8-Ag-Ni3S2@NF as a highly efficient electrode for oxygen evolution reaction (OER). The electrochemical investigation verifies that the Co9S8-Ag-Ni3S2@NF electrode exhibits superior electrocatalytic activity toward OER because of its nanoflowers' open-pore morphology, reduced overpotential (η10 = 125 mV), smaller charge transfer resistance, long-term stability, and a synergistic effect between various components, which allows the reactants to be more easily absorbed and subsequently converted into gaseous products during the water electrolysis process. DFT calculation also reveals that the introduction of Ag (222) surface into the Co9S8 (440)-Ni3S2 (120) system increases the electronic density of states per unit cell of a system and significantly reduces the energy barriers of intermediates for OER, leading to enhanced electrocatalytic activity for OER. This study showcases the innovation of employing trimetallic nanomaterials immobilized on a conductive, continuous porous three-dimensional network formed on a nickel foam (NF) substrate as a highly efficient catalyst for OER.

FeCoNi molybdenum-based oxides for efficient electrocatalytic oxygen evolution reaction

The search for highly efficient and inexpensive electrocatalysts is crucial to the advancement of environmentally friendly and sustainable energy sources. Here, adopting a one-step hydrothermal method, we have effectively fabricated a self-supported multi-metal molybdenum-based oxide (FeCoNi-MoO4) on nickel foam (NF). In addition to changing the catalyst's microstructure, the introducing of Fe and Co, enhanced its active center count, improved its electronic structure, and in turn reduced the difficulty for high-valence Ni and Fe species to form, which accelerates the oxygen evolution reaction (OER) kinetics by promoting the development of the actual active materials, NiOOH and FeOOH. FeCoNi-MoO4 has outstanding OER performance, requiring just 204 mV overpotentials at 10 mA cm-2 and 271 mV at 100 mA cm-2. Its exceptional OER kinetics at both low and high currents are indicated by a Tafel slope of 50.6 mV dec-1, which is attributed to the combined effect of its multi-metal composition and a higher number of active sites. Moreover, the FeCoNi-MoO4 electrode was operated continuously for over 48 h. Furthermore, the density functional theory (DFT) results demonstrated that the introducing of Fe and Co, which quickens the rate of electron transfer during the electrocatalytic process, improves the ability of oxygen intermediate species to adsorb, and ultimately lowers the overpotential, is responsible for the increased electrocatalytic activity of FeCoNi-MoO4. This work offers hope for further developments in the sector by proposing an efficient approach for creating multi-active electrocatalysts that are stable, economical, and efficient.

Shifting the Oxygen-Evolution Reaction Pathway via Cation Engineering to Activate Lattice Oxygen in Metal-Organic Frameworks

Metal-organic frameworks (MOFs) as promising electrocatalysts have been widely studied, but their performance is limited by conductivity and coordinating saturation. This study proposes a cationic (V) modification strategy and evaluates its effect on the electrocatalytic performance of CoFe-MOF nanosheet arrays. The optimal V-CoFe-MOF/NF electrocatalyst exhibits excellent oxygen-evolution reaction (OER)/hydrogen-evolution reaction (HER) performance (231 mV at 100 mA cm-2/86 mV at 10 mA cm-2) in alkaline conditions, with its OER durability exceeding 400 h without evident degradation. Furthermore, as a bifunctional electrocatalyst for water splitting, a small cell voltage is achieved (1.60 V at 10 mA cm-2). The practicability of the catalyst is further evaluated by membrane electrode assembly (MEA), showing outstanding activity (1.53 V at 10 mA cm-2) and long-term stability (at 300 mA cm-2). Moreover, our results reveal the apparent reconstruction properties of V-CoFe-MOF/NF in alkaline electrolytes, where the partially dissolved V promotes the formation of more active β-MOOH. The mechanism study shows the OER mechanism shifts to a lattice oxygen oxidation mechanism (LOM) after V doping, which directly avoids complex multistep adsorption mechanism and reduces reaction energy. This study provides a cation mediated strategy for designing efficient electrocatalysts.

Fine-tuning nanoflower-like Fe/Co hybrids with high content oxyhydroxide accelerating oxygen evolution kinetics

Iron hydroxide (FeOOH) is a potential active component in iron-based electrocatalysts for water electrolysis. However, its catalytic performance is constrained by its slow oxygen evolution reaction (OER) kinetics. Herein, we synthesized a nanoflower-like FeCo-hydro(oxy)oxides composite with tunable Fe/Co ratios (Fex-Coy) on nickel foam (NF) via a one-step electrodeposition technique. This method allows for precise control over the morphology and composition of the hybrid nanoflowers. The optimized Fe9-Co1 discloses favorable OER performance with a low overpotential of 222 mV at 50 mA cm-2 and demonstrates good stability exceeding 60 h at 10 mA cm-2. Further, an assembled Fe9-Co1(+)||Pt/C(-) dual-electrode configuration achieves a low cell voltage of 1.73 V at the current density of 100 mA cm-2 for water splitting, with long-term stability for 70 h and minimal degradation. Studies indicate that the distinctive nanoflower morphology of Fe9-Co1 enhances active site exposure, while both FeOOH and reconstructed CoOOH serve as catalytic centers, contributing to the observed OER performance. This work introduces a facile approach for synthesizing OER electrocatalysts, underscoring the role of the high-valence state of Fe/Co as active sites in the OER process.

Biologically templated formation of Cobalt-Phosphide-Graphene hybrids with charge redistribution for efficient hydrogen evolution

Developing highly efficient and sustainable hydrogen evolution reaction (HER) electrocatalysts is important for the practical application of emerging energy technologies. The spherical structure and phosphorus-rich properties of Chlorella can facilitate the construction of comparable transition metal phosphide electrocatalysts. Here, a microorganism template strategy is proposed to construct a cobalt-phosphide-graphene hybrid. Chlorella can absorb metal ions, and the generated rough spherical nanoparticles are uniformly distributed around the reduced graphene oxide nanosheets. This designed catalyst has comparable HER performance in acidic electrolytes and needs an overpotential of only 153 mV at a current density of 10 mA cm-2. The experimental and density functional theory results imply that the charge redistribution between Co2P and pyrrole-N is the key factor in enhancing the HER activity. The induced electron aggregation at the N and P sites can serve as a key active site for absorbing the adsorbed hydrogen atom intermediate to accelerate the HER process, contributing to the active sites of Co2P- and pyrrole-N-doped carbon with 0 eV hydrogen adsorption free energy. This work provides a broad idea for synthesizing advanced catalysts by a biological template approach, facilitating the innovative integration of biology and emerging electrochemical energy technologies.

Single-cluster anchored on PC6 monolayer as high-performance electrocatalyst for carbon dioxide reduction reaction: First principles study

Tremendous challenges remain to develop high-efficient catalysts for carbon dioxide reduction reaction (CO2RR) owing to the poor activity and low selectivity. However, the activity of catalyst with single active site is limited by the linear scaling relationship between the adsorption energy of intermediates. Motivated by the idea of multiple activity centers, triple metal clusters (M = Cr, Mn, Fe, Co, Ni, Cu, Pd, and Rh) doped PC6 monolayer (M3@PC6) were constructed in this study to investigate the CO2RR catalytic performance via density functional theory calculations. Results shows Mn3@PC6, Fe3@PC6, and Co3@PC6 exhibit high activity and selectivity for the reduction of CO2 to CH4 with limiting potentials of -0.32, -0.28, and -0.31 V, respectively. Analysis on the high-performance origin shows the more binding sites in M3@PC6 render the triple-atom anchored catalysts (TACs) high ability in regulating the binding strength with intermediates by self-adjusting the charges and conformation, leading to the improved performance of M3@PC6 than dual-atom doped PC6. This work manifests the huge application of PC6 based TACs in CO2RR, which hope to prove valuable guidance for the application of TACs in a broader range of electrochemical reactions.

A Ce2MgMoO6 double perovskite decorated on a functionalized carbon nanofiber nanocomposite for quantification of ciprofloxacin in milk and honey samples: Density functional theory interpretation

In this study, a novel Ce2MgMoO6/CNFs (cerium magnesium molybdite double perovskite decorated on carbon nanofibers) nanocomposite was developed for selective and ultra-sensitive detection of ciprofloxacin (CFX). Physical characterization and analytical techniques were used to explore the morphology, structure, and electrocatalytic characteristics of the Ce2MgMoO6/CNFs nanocomposite. The sensor has a wide linear range (0.005-7.71 μM and 9.75-77.71 μM), a low limit of detection (0.012 μM), high sensitivity (0.807 μA μM-1 cm-2 nM), remarkable repeatability, and an appreciable storage stability. Here, we used density functional theory to investigate CFX and oxidized CFX as well as the locations of the energy levels and electron transfer sites. Furthermore, the Ce2MgMoO6/CNFs-modified electrode was successfully tested in food samples (milk and honey), indicating an acceptable response with a recovery percentage and relative standard deviation of less than 4%, which is comparable to that of GC-MS. Finally, the developed sensor exhibited high selectivity and stability for CFX detection.

Oxygen-vacancy-reinforced perovskites promoting polysulfide conversion for lithium-sulfur batteries

Lithium-sulfur batteries (LSBs) are considered to be one of the most promising energy storage systems because of the ultrahigh energy density. However, their shuttle effect and slow redox kinetics seriously hinder the development of LSBs. To solve these issues, the perovskite La1-xSrxMnO3-δ (x = 0-0.5) with different oxygen vacancy concentrations were prepared by a facile liquid-phase synthesis and followed by the thermal annealing. The La1-xSrxMnO3-δ can not only anchor lithium polysulfides (LiPSs), but also catalyze the conversion of LiPSs. The detailed kinetic analysis and density functional theory calculations reveal that the optimal level of oxygen vacancies can effectively increase the binding energy between perovskites and LiPSs, and effectively promote the LiPS conversion kinetics. The S/La0.6Sr0.4MnO3-δ cathode with a moderate oxygen vacancy concentration exhibits high rate performance and ultrahigh capacity retention of 93.2% after 150 cycles at 0.1 C, which provides a potential for practical applications of LSBs. This work reveals the application of perovskite materials in the development of advanced LSBs.

Reaction Environment Regulation for Electrocatalytic CO2 Reduction in Acids

The electrocatalytic CO2 reduction reaction (CO2RR) is a sustainable route for converting CO2 into value-added fuels and feedstocks, advancing a carbon-neutral economy. The electrolyte critically influences CO2 utilization, reaction rate and product selectivity. While typically conducted in neutral/alkaline aqueous electrolytes, the CO2RR faces challenges due to (bi)carbonate formation and its crossover to the anolyte, reducing efficiency and stability. Acidic media offer promise by suppressing these processes, but the low Faradaic efficiency, especially for multicarbon (C2+) products, and poor electrocatalyst stability persist. The effective regulation of the reaction environment at the cathode is essential to favor the CO2RR over the competitive hydrogen evolution reaction (HER) and improve long-term stability. This review examines progress in the acidic CO2RR, focusing on reaction environment regulation strategies such as electrocatalyst design, electrode modification and electrolyte engineering to promote the CO2RR. Insights into the reaction mechanisms via in situ/operando techniques and theoretical calculations are discussed, along with critical challenges and future directions in acidic CO2RR technology, offering guidance for developing practical systems for the carbon-neutral community.

Oxygen vacancies enhanced electrocatalytic water splitting of P-FeMoO4 initiated via phosphorus doping

Transition metal oxides (TMOs) are abundant and cost-effective materials. However, poor conductivity and low intrinsic activity limit their application in electrolyzed water catalysts. Herein, we prepared P-FeMoO4 in situ on nickel foam (P-FMO@NF) by phosphorylation-modified FeMoO4 to optimize its electrocatalytic properties. Interestingly, phosphorus doping is accompanied by the generation of oxygen vacancies and surface phosphates. Oxygen vacancies accelerated Mo dissolution during the oxygen evolution reaction (OER), leading to the rapid reconfiguration of P-FMO@NF to FeOOH and regulating the electronic structure of P-FMO@NF. The formation of phosphates is caused by the substitution of some molybdates with phosphates, which further increases the amount of oxygen vacancies. Hence, the OER overpotential of P-FMO@NF at a current density of 10 mA cm-2 is only 206 mV, and the hydrogen evolution reaction (HER) overpotential is 154 mV. It was assembled into a water splitting cell with a voltage of just 1.59 V at 10 mA cm-2 and shows excellent stability over 50 h. These excellent electrocatalytic properties are mainly attributed to the oxygen vacancies, which improve the interfacial charge transfer properties of the catalysts. This study provides new insights into phosphorus doping and offers a new perspective on the design of electrocatalysts.

Two-dimensional correlation infrared spectroscopy study on vanadoborate anionic skeleton regulated by countercations

Two novel vanadoborate compounds, [Cu(en)2]3[Li(H2O)]4[Li(H2O)3]2[V12B18O50(OH)10(H2O)]2·33.5H2O (1) and (H2en)4[Li(H2O)]4[V12B18O55(OH)5(H2O)]·14H2O (2), were synthesized via hydrothermal synthesis under identical conditions except for temperature. Structural analysis revealed that although both contain [V12B18O60]n- cluster anion, the different countercations potentially lead to variations in the [V12B18O60]n- cluster anion skeletons. In compound 1, the V4+/V5+ ratio was 10:2; while in compound 2 the ratio was 11:1. It is speculated that different countercations may influence the valence states of cluster anions. In this study, quantum chemical calculations revealed that the aromaticity and activity of the two compounds were different, and two-dimensional correlation infrared spectroscopy (2D-COS-IR) under magnetic perturbation confirmed that distinct response peaks of functional group vibrations to the magnetic field due to the different V4+/V5+ ratios and aromaticity of the two compounds. An electrochemical analysis revealed that compound 2 exhibits higher electrocatalytic activity. The results of quantum chemical calculations are aligned not only with the changes in the 2D-COS-IR spectra but also with the conclusions obtained from experiments on electrochemical properties. Overall, this work proposes a novel strategy for interpreting the alteration of vanadoborate anionic skeleton due to the introduction of different countercations by combining 2D-COS-IR with quantum chemical calculations.

Subnanometric Osmium Clusters Confined on Palladium Metallenes for Enhanced Hydrogen Evolution and Oxygen Reduction Catalysis

Highly efficient, cost-effective, and durable electrocatalysts, capable of accelerating sluggish reaction kinetics and attaining high performance, are essential for developing sustainable energy technologies but remain a great challenge. Here, we leverage a facile heterostructure design strategy to construct atomically thin Os@Pd metallenes, with atomic-scale Os nanoclusters of varying geometries confined on the surface layer of the Pd lattice, which exhibit excellent bifunctional properties for catalyzing both hydrogen evolution (HER) and oxygen reduction reactions (ORR). Importantly, Os5%@Pd metallenes manifest a low η10 overpotential of only 11 mV in 1.0 M KOH electrolyte (HER) as well as a highly positive E1/2 potential of 0.92 V in 0.1 M KOH (ORR), along with superior mass activities and electrochemical durability. Theoretical investigations reveal that the strong electron redistribution between Os and Pd elements renders a precise fine-tuning of respective d-band centers, thereby guiding adsorption of hydrogen and oxygen intermediates with an appropriate binding energy for the optimal HER and ORR.

Grafting Ultra-fine Nanoalloys with Amorphous Skin Enables Highly Active and Long-lived Acidic Hydrogen Production

Large-scale deployment of proton exchange membranes water electrolysis (PEM-WE) requires a substantial reduction in usage of platinum group metals (PGMs) as indispensable electrocatalyst for cathodic hydrogen evolution reaction (HER). Ultra-fine PGMs nanocatalysts possess abundant catalytic sites at lower loading, but usually exhibit reduced stability in long-term operations under corrosive acidic environments. Here we report grafting the ultra-fine PtRu crystalline nanoalloys with PtxRuySez "amorphous skin" (c-PtRu@a-PtxRuySez) by in situ atomic layer selenation to simultaneously improve catalytic activity and stability. We found that the c-PtRu@a-PtxRuySez-1 with ~0.6 nm thickness amorphous skin achieved an ultra-high mass activity of 26.7 A mg-1 Pt+Ru at -0.07 V as well as a state-of-the-art durability maintained for at least 1000 h at -10 mA cm-2 and 550 h at -100 mA⋅cm-2 for acid HER. Experimental and theoretical investigations suggested that the amorphous skin not only improved the electrochemical accessibility of the catalyst surface and increasing the intrinsic activity of the catalytic sites, but also mitigated the dissolution/diffusion of the active species, thus resulting in improved catalytic activity and stability under acidic electrolyte. This work demonstrates a direction of designing ultra-fine PGMs electrocatalysts both with high utilization and robust durability, offers an in situ "amorphous skin" engineering strategy.

Fabric-like rhodium-nickel-tungsten oxide nanosheets for highly-efficient electrocatalytic H2 generation in an alkaline electrolyte

Transition-metal based oxides with custom-designed phases are effective oxygen evolution reaction (OER) electrocatalysts. However, their applications in water splitting are limited because of insufficient catalytic performance in hydrogen evolution reaction (HER) in alkaline media. In this work, we engineer fabric-like rhodium-nickel-tungsten oxide nanosheets (Rh2O3-NiWO4) on plasma-treated nickel foam (PNF) with a one-step hydrothermal approach for potential applications as industry-grade HER electrocatalysts. Benefiting from rich active sites exposed on the heterostructure, low hydrogen binding energy on Rh, and enhanced charge delivery rates, Rh2O3-NiWO4/PNF catalyst exhibits superior HER activity than that achieved by a commercially available Pt/C catalyst. This is evidenced by the fact that the overpotentials of Rh2O3-NiWO4/PNF for delivering current densities of 10 (j10) and 1000 (j1000) mA cm-2 in 1.0 M KOH are merely 19 and 293 mV, respectively. Meanwhile, the small Tafel slope (18 mV dec-1) of the optimized catalyst manifests the fast HER kinetics. In addition, Rh2O3-NiWO4/PNF exhibits ultra-stable HER performance, and the current density (j100) only decrease 7.69 % after 100 h chronoamperometric curves (I-t) test. The present work provides a new approach for designing high-performance, low-cost 2D electrocatalysts for H2 production and other clean energy-related applications.

Renovated FeCoP-NC nanospheres wrapped by CoP-NC nanopetals: As a tremendously effectual and robust MOF-assisted electrocatalyst for hydrogen energy production

The future of energy technology is significantly influenced by hydrogen (H2) energy. However, hydrogen energy production through water-splitting entirely depends on the catalyst's performance. Modifying the morphological structure and increasing the number of active sites by changing the metal composition are pivotal factors in enhancing the catalytic activity for the hydrogen evolution reaction (HER). In this context, we introduce the impact of metal-organic framework (MOF) strategies for decorating CoP petals onto α-Fe2O3 and FeCoP-NC (NC-nitrogen-doped carbon) nanoflowers. This method results in an excellent electrocatalyst for HER. The study demonstrated the influence of different MOF precursors, the impact of calcination temperatures, and the importance of composition percentages in Fe1-xCoxP-NC. As a result, FeCoP-NC shows excellent electrochemical performance potential (η) of 57 mV, a rapid kinetic Tafel value of 61 mV/dec, and remarkable electrochemical stability of around 2000 cycles and 20 h in stand potential. Additionally, the composite has numerous active surfaces at 4.7 mF/cm2 during the electrochemical reactions. This work concludes that MOF-assisted FeCoP-NC nanoflowers are an ideal electrocatalyst for HER in an alkaline medium.

Removal of N-nitrosopyrrolidine from GAC by a three-dimensional electrochemical reactor: degradation mechanism and degradation path

Nitrogen-containing disinfection by-products (N-DBPs) produced in the process of drinking water disinfection are widely concerning due to the high cytotoxicity and genotoxicity. It is due to the difficulty of natural degradation of N-DBPs in water and the fact that conventional treatment systems do not effectively treat N-DBPs in drinking water. In this study, N-nitrosopyrrolidine (NPYR) in water was electrocatalytically degraded by a three-dimensional electrode reactor (3DER). This system applied graphite plates as anode and cathode. The granular activated carbon (GAC) was used as third electrode. The degradation of NPYR using a continuous flow three-dimensional electrode reactor was investigated by examining the effects of flow rate, current density, electrolyte concentration, and pollutant concentration on the degradation efficiency, energy consumption, and reaction kinetics of GAC particle electrodes. The results showed that the optimal operating conditions were flow rate = 0.45 mL/min, current density = 6 mA/cm2, Na2SO4 concentration = 0.28 mol/L, and NPYR concentration = 20 mg/L. Under optimal conditions, the degradation of NPYR exceeded 58.84%. The main contributor of indirect oxidation was deduced from free radical quenching experiments. NPYR concentration was measured by GC-MS with DB-5 capillary column, operating in full scan monitoring mode for appropriate quantification of NPYR and intermediates. Based on the identification of reaction intermediates, a possible pathway for the electrochemical oxidation of NPYR on GAC particle electrodes was proposed.

Cellulose-based carbon nanotubes array with lawn-like 3D architecture for oxygen reduction reaction

The conversion of biomass into high-performance carbon-based materials provides an opportunity to valorize biomass for advanced applications. Achieving this necessitates requires dedicated efforts and innovations in biocarbon synthesis, design, and applications. This study proposes the controllable conversion of biomass-derived cellulose into well-distributed carbon nanotubes (CNTs) by tuning the precipitation of cellulose pyrolysis generated vapors with in-situ formed ferric metal nanoparticles. The obtained CNTs exhibited lawn-like 3D architecture with similar length, uniform alignment, and dense distribution. The combined use of ferric chloride and dicyandiamide as the reagents with a mass ration of 0.162:1.05, demonstrated optimal performance in controlling the morphology of CNTs, enhancing the graphitization, and increasing the content of graphitic-N and pyridine-N. This multi-dimensional modification enhanced the electrocatalytic performance of the obtained CNTs, achieving an onset potential of 0.875 V vs. relative hydrogen electrode (RHE), a half-wave potential of 0.703 V vs. RHE, and a current density of -4.95 mA cm-2 during the oxygen reduction reaction. Following microbial fuel cells (MFCs) tests achieved an output voltage of 0.537 V and an output power density of 412.85 mW m-2, comparable to MFC with Pt/C as the cathode catalyst. This biomass-derived catalyst is recommended as a high-quality, non-noble metal alternative to traditional noble-metal catalysts.

Synergistic engineering of P, N-codoped carbon-confined bimetallic cobalt/nickel phosphides with tailored electronic structures for boosting urea electro-oxidation

Bimetallic phosphides exhibit superior electrocatalytic activities and synergistic effects that make them ideal electrocatalysts for the urea oxidation reaction (UOR). Herein, P, N-codoped carbon-encapsulated cobalt/nickel phosphides derived from NiCo-MOF-74 (NiCoP@PNC) and anchored on P-doped carbonized wood fiber (PCWF) for UOR were prepared through synchronous carbonization and phosphorization. By benefiting from the synergistic effect of structural and electronic modulation, NiCoP@PNC/PCWF exhibits excellent UOR electrocatalytic performance under alkaline conditions, achieving a current density of 50 mA cm-2 with a potential of only 1.34 V (vs reversible hydrogen electrode, RHE) and continuous operation for more than 72 h. In addition, for the overall urea splitting, an electrolyzer using UOR replaced OER, which required only 1.50 V to achieve a current density of 50 mA cm-2 with excellent stability, 230 mV less than that required for the HER||OER system. In-depth theoretical analysis further proves that the strong synergistic effect between Co and Ni optimizes electronic structures, yielding excellent UOR properties. The synergistic strategy of structural and electrical modulation provides broad prospects for the design and synthesis of excellent UOR electrocatalysts for energy-saving hydrogen production by using renewable resources.

Electrochemical determination of ascorbic acid using palladium supported on N-doped graphene quantum dot modified electrode

To precise screening concentration of ascorbic acid (AA), a novel electrochemical sensor was prepared using palladium nanoparticles decorated on nitrogen-doped graphene quantum dot modified glassy carbon electrode (PdNPs@N-GQD/GCE). For this purpose, nitrogen doped GQD nanoparticles (N-GQD) were synthesized from a citric acid condensation reaction in the presence of ethylenediamine and subsequently modified by palladium nanoparticles (PdNPs). The electrochemical behavior of AA was investigated, in which the oxidation peak appeared at 0 V related to the AA oxidation. Considering the synergistic effect of Pd nanoparticles as an active electrocatalyst, and N-GQD as an electron transfer accelerator and electrocatalytic activity improving agent, PdNPs@N-GQD hybrid materials showed excellent activity in the direct oxidation of AA. In the optimal conditions, the voltammetric response was linear in the range from 30 to 700 nM and the detection limit was calculated to be 23 nM. The validity and the efficiency of the proposed sensor were successfully tested and confirmed by measuring AA in real samples of chewing tablets, and fruit juice.

DNA Framework-Templated Fabrication of Ultrathin Electroactive Gold Nanosheets

Generally, two-dimensional gold nanomaterials have unique properties and functions that offer exciting application prospects. However, the crystal phases of these materials tend to be limited to the thermodynamically stable crystal structure. Herein, we report a DNA framework-templated approach for the ambient aqueous synthesis of freestanding and microscale amorphous gold nanosheets with ultrathin sub-nanometer thickness. We observe that extended single-stranded DNA on DNA nanosheets can induce site-specific metallization and enable precise modification of the metalized nanostructures at predefined positions. More importantly, the as-prepared gold nanosheets can serve as an electrocatalyst for glucose oxidase-catalyzed aerobic oxidation, exhibiting enhanced electrocatalytic activity (~3-fold) relative to discrete gold nanoclusters owing to a larger electrochemical active area and wider band gap. The proposed DNA framework-templated metallization strategy is expected to be applicable in a broad range of fields, from catalysis to new energy materials.

A new method for the preparation of MgAl layered double hydroxide-copper metal-organic frameworks structures: application to electrocatalytic oxidation of formaldehyde

In this research, we present a novel design protocol for the in-situ synthesis of MgAl layered double hydroxide-copper metal-organic frameworks (LDH-MOFs) nanocomposite based on the electrocoagulation process and chemical method. The overall goal in this project is the primary synthesis of para-phthalic acid (PTA) intercalated MgAl-LDH with Cu (II) ions to produce the paddle-wheel like Cu-(PTA) MOFs nanocrystals on/in the MgAl-LDH structure. The physicochemical properties of final product; Cu-(PTA) MOFs/MgAl-LDH, were characterized by the surface analysis and chemical identification methods (SEM, EDX, TEM, XRD, BET, FTIR, CHN, DLS, etc.). The Cu-(PTA) MOFs/MgAl-LDH nanocomposite was used to modification of the carbon paste electrode (CPE); Cu-(PTA) MOFs/MgAl-LDH/CPE. The electrochemical performance of Cu-(PTA) MOFs/MgAl-LDH/CPE was demonstrated through the utilization of electrochemical methods. The results show a stable redox behavior of the Cu (III)/Cu (II) at the surface of Cu-(PTA) MOFs/MgAl-LDH/CPE in alkaline medium (aqueous 0.1 M NaOH electrolyte). Then, the Cu-(PTA) MOFs/MgAl-LDH/CPE was used as a new electrocatalyst toward the oxidation of formaldehyde (FA). Electrochemical data show that the Cu-(PTA) MOFs/MgAl-LDH/CPE exhibits superior electrocatalytic performance on the oxidation of FA. Also the diffusion coefficient, exchange current density (J°) and mean value of catalytic rate constant (Kcat) were found to be 1.18 × 10-6 cm2 s-1, 23 mA cm-2 and 0.4537 × 104 cm3 mol-1 s-1, respectively. In general, it can be said the Cu-(PTA) MOFs/MgAl-LDHs is promising candidate for applications in direct formaldehyde fuel cells.

Cross-linked α-Ni(OH)2 nanosheets with a Ni3+-rich structure for accelerating electrochemical oxidation of 5-hydroxymethylfurfural

Electrochemical oxidation of biomass-based 5-hydroxymethylfurfural (HMF) is an effective approach for achieving the high-value products of 2,5-furandicarboxylic acid (FDCA). However, the restricted formation of high-valence metal active species for electrocatalysts results in a sluggish kinetic process of HMF oxidation reaction (HMFOR). Herein, we fabricated the Ni3+-rich cross-linked α-Ni(OH)2 nanosheets for accelerating the HMFOR through an anion-mediated strategy. It is identified that the Cl- ions with strong penetrability replace a portion of lattice oxygen atoms in α-Ni(OH)2 to form Ni-Cl bonds, contributing to breaking the inherent lattice order and generating a special Ni3+-rich structure. Owing to the promoted adsorption and accelerated oxidation of hydroxyl and aldehyde groups by the affluent Ni3+ active species, the large oxidation current density of 116.5 mA cm-2 and HMFOR kinetic constant of 0.067 min-1 has been achieved at 1.45 V (vs. RHE). By analyzing the oxidation products, the FDCA yield and Faradic efficiency are both higher than 99.25 % and 99.36 % for five successive determinations. Therefore, this work provides an insightful anion-mediated strategy for designing high-performance electrocatalysts for biomass conversion application.

Synergized N and P co-doped Ti3C2Tx mxene enabling high-performance Li-air batteries

Lithium-oxygen batteries (LOBs) with a theoretical energy density of up to 3500 Wh kg-1 hold a promise for the next-generation high-energy-density batteries. However, the slow oxygen reduction/evolution kinetics at the cathode limits the performance of Li-air batteries. The rational design of efficient catalysts is essential for the improvement of oxygen electrode reaction kinetics. Herein, we report a facile strategy to co-dope N and P atoms simultaneously into Ti3C2Tx (NP-Ti3C2Tx) MXene via an electrostatic self-assembly approach. The co-doped NP-Ti3C2Tx layers expose abundant active sites, providing more space for accommodating the formed Li2O2. Moreover, the N and P co-doping facilitates efficient electron transport in Ti3C2Tx MXene. The LOB with NP-Ti3C2TX catalyst delivers a high discharge capacity of 24,940 mAh/g at 1000 mA g-1. At a cut-off capacity of 1000 mAh/g, this battery runs continuously for 159, 276, 185, and 229 cycles at current densities of 1000, 2000, 3000, and 5000 mA g-1, respectively. Theoretical calculations unveil that N and P co-doping enables lower ηORR and ηOER of only 0.26 V and 0.13 V on Ti3C2Tx MXene, respectively. This work offers a feasible approach for constructing efficient MXene electrocatalysts for Li-air batteries.

Biological upcycling of nickel and sulfate as electrocatalyst from electroplating wastewater

Upcycling nickel (Ni) to useful catalyst is an appealing route to realize low-carbon treatment of electroplating wastewater and simultaneously recovering Ni resource, but has been restricted by the needs for costly membranes or consumption of large amount of chemicals in the existing upcycling processes. Herein, a biological upcycling route for synchronous recovery of Ni and sulfate as electrocatalysts, with certain amount of ferric salt (Fe3+) added to tune the product composition, is proposed. Efficient biosynthesis of bio-NiFeS nanoparticles from electroplating wastewater was achieved by harnessing the sulfate reduction and metal detoxification ability of Desulfovibrio vulgaris. The optimal bio-NiFeS, after further annealing at 300 °C, served as an efficient oxygen evolution electrocatalyst, achieving a current density of 10 mA·cm-1 at an overpotential of 247 mV and a Tafel slope of 60.2 mV·dec-1. It exhibited comparable electrocatalytic activity with the chemically-synthesized counterparts and outperformed the commercial RuO2. The feasibility of the biological upcycling approach for treating real Ni-containing electroplating wastewater was also demonstrated, achieving 99.5 % Ni2+removal and 41.0 % SO42- removal and enabling low-cost fabrication of electrocatalyst. Our work paves a new path for sustainable treatment of Ni-containing wastewater and may inspire technology innovations in recycling/ removal of various metal ions.

Covalently Bonded Ni Sites in Black Phosphorene with Electron Redistribution for Efficient Metal-Lightweighted Water Electrolysis

The metal-lightweighted electrocatalysts for water splitting are highly desired for sustainable and economic hydrogen energy deployments, but challengeable. In this work, a low-content Ni-functionalized approach triggers the high capability of black phosphorene (BP) with hydrogen and oxygen evolution reaction (HER/OER) bifunctionality. Through a facile in situ electro-exfoliation route, the ionized Ni sites are covalently functionalized in BP nanosheets with electron redistribution and controllable metal contents. It is found that the as-fabricated Ni-BP electrocatalysts can drive the water splitting with much enhanced HER and OER activities. In 1.0 M KOH electrolyte, the optimized 1.5 wt% Ni-functionalized BP nanosheets have readily achieved low overpotentials of 136 mV for HER and 230 mV for OER at 10 mA cm-2. Moreover, the covalently bonding between Ni and P has also strengthened the catalytic stability of the Ni-functionalized BP electrocatalyst, stably delivering the overall water splitting for 50 h at 20 mA cm-2. Theoretical calculations have revealed that Ni-P covalent binding can regulate the electronic structure and optimize the reaction energy barrier to improve the catalytic activity effectively. This work confirms that Ni-functionalized BP is a suitable candidate for electrocatalytic overall water splitting, and provides effective strategies for constructing metal-lightweighted economic electrocatalysts.

Bimetallic MXene with tailored vanadium d-band as highly efficient electrocatalyst for reversible lithium-oxygen battery

Lithium-oxygen (Li-O2) battery possesses high theoretical energy density of ∼ 3500 Wh kg-1, yet the sluggish kinetics of oxygen redox reactions hinder its practical application. Herein, TiVC bimetallic MXene solid solution is prepared as the efficient electrocatalyst for Li-O2 battery. The results of experiment and theoretical calculations reveal that through the formation of Ti-C-V bond in TiVC, electrons transfer from V site to Ti site enhances electron delocalization of V sites, which causes the upshift of d band center of V site and strengthens the adsorption of intermediate products (LiO2) on TiVC electrode surface. Due to the strong adsorption of intermediates, the film-like Li2O2 can be formed on TiVC electrode via the surface-adsorbed pathway, which ensures the full contact between the electrode and discharged product and thus facilitates the charge transfer between TiVC electrode and oxygen species during charge process. As a consequence, the TiVC based Li-O2 battery exhibits superior electrochemical performance including large discharge capacity (12780 mAh/g) and extended cycling stability (422 cycles) at the current density of 300 mA g-1.

Nitriding-reduction fabrication of coralloid CoN/Ni/NiO for efficient electrocatalytic overall water splitting

The introduction of nitride in Ni/NiO-based catalytic system for electrocatalystic water splitting via a skillful strategy remains a great challenge. Herein, we proposed a one-step urea nitriding-reduction strategy for the fabrication of novel CoN/Ni/NiO electrocatalyst on carbon cloth (CC). The combination of CoN and Ni/NiO could construct CoN/Ni interface and expose more active sites, thus exhibiting excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performance in alkaline media. Consequently, CoN/Ni/NiO catalyst exhibited remarkable HER/OER performance with an overpotential of 92 mV/114 mV at 10 mA cm-2 in 1.0 M KOH, along with a low cell voltage of 1.56 V to enhance overall water splitting. In addition, when CoN was introduced in Ni/NiO system, CoN/Ni/NiO displayed high conductivity, large active surface areas, high Faradic efficiency (FE) and remarkable stability. Density functional theory (DFT) calculations demonstrated that CoN/Ni/NiO possessed a decreased d-band center beneficial for optimizing the energy barrier of intermediates. Specifically, the ΔGH2O (0.088 eV) and ΔGH* (0.18 eV) in HER and the ΔGOOH* (1.4 eV) of rate determining step (O*→OOH*) in OER of CoN/Ni/NiO catalyst were optimized to achieve high water splitting activity. Simultaneously, for adsorbed H2O on CoN/Ni/NiO, the OH bond length extended from 0.975 to 1.110 Å, and the bond angle enlarged from 104.271 to 109.471°, thereby directly demonstrating the excellent HER/OER performance of CoN/Ni/NiO.

Bionic Fe-N-C catalyst with abundant exposed Fe-Nx sites and enhanced mass transfer properties for efficient oxygen reduction

Transition metal and nitrogen co-doped carbon electrocatalysts are promising candidates to replace the precious metal platinum (Pt) in oxygen reduction reactions (ORR). Unfortunately, the electrochemical performance of existing electrocatalysts is restricted due to limited accessibility of active sites. Inspired by jellyfish tentacles, we design an efficient ORR micro-reactor called Fe-Nx/HC@NWs. It features abundant exposed Fe-Nx active sites dispersed on nitrogen-doped cubic carbon cages, which have a hierarchically porous and hairy structure. The accessible, atomically dispersed Fe-Nx sites and the elaborate substrate architecture synergize to provide the catalyst withremarkable ORR catalytic activity, extraordinary long-term stability, and favorable methanol tolerance in an alkaline electrolyte; overall, its performance is comparable to that of commercial carbon-supported Pt. Our synthesis is facile and controllable, paving a new avenue toward advanced non-precious metal-based electrocatalysts for energy storage and conversion.

Symmetry Breaking Enhancing the Activity of Electrocatalytic CO2 Reduction on an Icosahedron-Kernel Cluster by Cu Atoms Regulation

Recently, CO2 hydrogenation had a new breakthrough resulting from the design of catalysts to effectively activate linear CO2 with symmetry-breaking sites. However, understanding the relationship between symmetry-breaking sites and catalytic activity at the atomic level is still a great challenge. In this study, a set of gold-copper alloy Au13 Cux (x=0-4) nanoclusters were used as research objects to show the symmetry-controlled breaking structure on the surface of nanoclusters with the help of manipulability of the Cu atoms. Among them, Au13 Cu3 nanocluster displays the highest degree of symmetry-breaking on its crystal structure compared with the other nanoclusters in the family. Where the three copper atoms occupying the surface of the icosahedral kernel unevenly with one copper atom is coordinately unsaturated (CuS2 motif relative to CuS3 motif). As expected, Au13 Cu3 has an excellent hydrogenation activity of CO2 , in which the current density is as high as 70 mA cm-2 (-0.97 V) and the maximum FECO reaches 99 % at -0.58 V. Through the combination of crystal structures and theoretical calculations, the excellent catalytic activity of Au13 Cu3 is revealed to be indeed closely related to its asymmetric structure.

Constructing Interfacial Oxygen Vacancy and Ruthenium Lewis Acid-Base Pairs to Boost the Alkaline Hydrogen Evolution Reaction Kinetics

Simultaneous optimization of the energy level of water dissociation, hydrogen and hydroxide desorption is the key to achieving fast kinetics for the alkaline hydrogen evolution reaction (HER). Herein, the well-dispersed Ru clusters on the surface of amorphous/crystalline CeO2-δ (Ru/ac-CeO2-δ ) is demonstrated to be an excellent electrocatalyst for significantly boosting the alkaline HER kinetics owing to the presence of unique oxygen vacancy (VO ) and Ru Lewis acid-base pairs (LABPs). The representative Ru/ac-CeO2-δ exhibits an outstanding mass activity of 7180 mA mgRu -1 that is approximately 9 times higher than that of commercial Pt/C at the potential of -0.1 V (V vs RHE) and an extremely low overpotential of 21.2 mV at a geometric current density of 10 mA cm-2 . Experimental and theoretical studies reveal that the VO as Lewis acid sites facilitate the adsorption of H2 O and cleavage of H-OH bonds, meanwhile, the weak Lewis basic Ru clusters favor for the hydrogen desorption. Importantly, the desorption of OH from VO sites is accelerated via a water-assisted proton exchange pathway, and thus boost the kinetics of alkaline HER. This study sheds new light on the design of high-efficiency electrocatalysts with LABPs for the enhanced alkaline HER.

Defect engineering associated with cationic vacancies for promoting electrocatalytic water splitting in iron-doped Ni2P nanosheet arrays

Transition metal phosphides are highly efficient catalysts that do not rely on noble metals, which have shown great potential in replacing noble metal catalysts and contributing to the advancement of the electrocatalytic hydrogen production industry. To further enhance the catalytic performance of transition metal phosphides, researchers have discovered that cationic vacancy defects can be utilized to regulate their electronic structure, thereby improving their catalytic properties. In this research, we present the successful synthesis of a bifunctional Ni2P electrocatalyst (VFe-Ni2P) with cationic vacancy defects through electrodeposition and acid etching techniques. The introduction of cationic vacancies after acid etching is confirmed by electron paramagnetic resonance (EPR) spectroscopy. The VFe-Ni2P electrocatalyst demonstrates excellent catalytic performance in alkaline environments, achieving a current density of 10 mA∙cm-2 at an overpotential of 52 mV for the hydrogen evolution reaction (HER), and the same current density with an overpotential of 154 mV for the oxygen evolution reaction (OER). Additionally, the VFe-Ni2P/NF electrode exhibits remarkable stability over 1000 cyclic voltammetric cycles for both HER and OER. This study presents a novel approach for the synthesis and performance control of highly-efficient transition metal phosphide electrocatalysts, which holds significant importance in the development and design of new energy materials.

Surface restructuring Prussian blue analog-derived bimetallic CoFe phosphides by N-doped graphene quantum dots for electroactive hydrogen evolving catalyst

As a crucial stage of electrochemical water splitting, hydrogen evolution reaction (HER) favour catalyst to attain rapid kinetics for its broader application, alternating Pt in the acidic environment. Transition metal phosphides (TMPs) are one kind of earth-abundant, nonprecious-based catalyst which has been classified as a viable alternative and active for HER. While the performance remains inferior to Pt which primarily targets durability under high current density, pinpointing the reconfiguration strategy would be critical to their catalytic competency. Herein, we reported engineered N-doped graphene quantum dots (NGQD) on the surface of bimetallic CoFe phosphide (CoFeP) derived from cobalt iron Prussian blue analogue (CoFePBA) as an efficient HER. By introducing the NGQD, the surface architect and electronic state of the transition metal are altered through an adjusted electronic configuration and thus, improving the electrocatalytic activity for HER. The X-ray absorption spectroscopy (XAS) highlighting the role of NGQD, which successfully induced the electron density of Co atoms, further expedites its conductivity and electroactivity. The optimized NGQD/CoFeP substantially surpasses an overpotential of 70 mV (vs. RHE) at the current density of 10 mA cm-2 in 0.5 M H2SO4. Furthermore, the NGQD/CoFeP maintains its exceptional stability under an extremely high current density of 600 mA cm-2 after 12 h of continuous operation. Our findings show that NGQD/CoFeP might demonstrate as a viable alternative to the conventional Pt electrocatalyst in commercial water splitting for hydrogen generation.

The "dual-layer sulfur cathode" strategy: An In2S3/Bi2S3@rGO heterostructure as an interlayer/modified separator for boosting the areal capacities of lithium-sulfur batteries

The specific energies and energy densities of lithium-sulfur (Li-S) batteries are influenced by various cell parameters, including the sulfur loading, the sulfur weight percentage in the cathode, and the electrolyte/sulfur ratio. An In2S3/Bi2S3@rGO heterostructure was obtained by growing indium sulfide nanoparticles on the surface of bismuth sulfide nanoflowers in a graphene oxide (GO) solution via a one-step solvothermal approach. This structure was introduced as a modified separator/dual-layer sulfur cathode for Li-S batteries. The Bi2S3/In2S3 heterointerfaces act as active sites to speed up interfacial electron transfer, along with the entrapment, diffusion, and transformation of lithium polysulfides. A Li-S cell containing a dual-layer sulfur cathode (thin layer of In2S3/Bi2S3@rGO sandwiched between two thick layers of sulfur) and coupled with an In2S3/Bi2S3@rGO-coated separator suppressed the polysulfide shuttle effect. The cell based on the dual-layer sulfur cathode technology and operated at a current rate of 0.3C achieved a high capacity (7.1 mAh cm-2) after the 200th cycle, giving an electrolyte/sulfur ratio (10 µL mg-1) under a high sulfur loading (11.53 mg cm-2). These results demonstrate the unique nature of the dual-layer sulfur cathode technique, which can yield high energy density Li-S batteries with high sulfur loadings and low electrolyte/sulfur ratios.

Bimetallic atom synergistic covalent organic framework for efficient electrochemical nitrate reduction

Electrochemical reduction has emerged as an effective method to remove nitrate from industrial wastewater. Nevertheless, this method has been largely restricted by the lack of low-cost and efficient electrocatalysts. Here, we demonstrate a porous two-dimensional covalent organic framework (2D COF) material as a promising electrocatalyst, which is obtained via a Schiff base reaction by combining copper phthalocyanine with bipyridine sites for precise copper coordination. The bidentate coordinated COF material has a robust framework and stable chemical property, allowing the isolated Cu sites to be embedded into the regular pores with controlled and uniformly dispersed active centers. The well-defined design of the reaction monomers makes the COF material to trap nitrate ions more easily from aqueous solution. By rationally combining the synergistic effect of 2D COF and Cu active sites, the CuTAPc-CuBPy-COF electrocatalyst shows much higher nitrate reduction efficiency than CuTAPc-BPy-COF under low superpotential and different nitrate concentrations. The high NO3- conversion (90.3 %) and NH3 selectivity (69.6 %) are achieved. To our best acknowledge, this is the first demonstration of bi-copper-based COF material for NO3-RR electrocatalysis, which provides a new direction for the rational design of COFs as significant electrocatalysts for nitrate reduction.

Oxygen evolution catalyzed by Ni-Co-Nb ternary metal sulfides on plasma-activated Ni-Co support

As a four-electron-proton coupled reaction, the oxygen evolution reaction (OER) requires a high overpotential for electrocatalytic water splitting. Most of the reported OER catalysts still need higher overpotentials than the thermodynamic water decomposition potential (1.23 V). Therefore, developing the efficient and cost-effective OER electrocatalysts remains a challenge in the electrocatalysis filed. Herein, multiphase Ni-Co-Nb sulfides (NiCoNbSx) are in-situ engineered on the plasma-activated nickel-cobalt foam (PNCF), and the synthesized NiCoNbSx/PNCF exhibits rich heterointerfaces and active sites, causing a high OER performance in an alkaline medium. The NiCoNbSx/PNCF catalyst features the low overpotentials of 48 and 382 mV for delivering the current densities of 10 (j10) and 1000 mA cm-2 (j1000), with a good electrocatalytic stability. The theoretical calculations reveal that the heterojunction interface of NiS (401)-Co9S8 (440) acts as the active center for OER. These results provide a new effective surface modification approach and insights into catalytic processes enabling water electrolysis pursued for clean and sustainable energy applications.

Evolution of Vanadium Redox Flow Battery in Electrode

The vanadium redox flow battery (VRFB) is a highly regarded technology for large-scale energy storage due to its outstanding features, such as scalability, efficiency, long lifespan, and site independence. This paper provides a comprehensive analysis of its performance in carbon-based electrodes, along with a comprehensive review of the system's principles and mechanisms. It discusses potential applications, recent industrial involvement, and economic factors associated with VRFB technology. The study also covers the latest advancements in VRFB electrodes, including electrode surface modification and electrocatalyst materials, and highlights their effects on the VRFB system's performance. Additionally, the potential of two-dimensional material MXene to enhance electrode performance is evaluated, and the author concludes that MXenes offer significant advantages for use in high-power VRFB at a low cost. Finally, the paper reviews the challenges and future development of VRFB technology.

Coupling high entropy oxide with hollow carbon spheres by rapid microwave solvothermal strategy for boosting oxygen evolution reaction

High entropy oxides (HEOs) are promising oxygen evolution electrocatalysts due to the unique structure, inherent tunability, as well as excellent catalytic activity and stability. Herein, (FeCoNiCrMn)3O4 nanoparticles coupling with the hollow-mesoporous carbon spheres (HCS) has been designed and fabricated by a rapid and efficient microwave solvothermal followed by annealing. The prepared (FeCoNiCrMn)3O4 nanoparticles are highly dispersed on the HCS surface with an average particle size of approximately 3.3 nm. The composite with large surface areas can facilitate mass transfer and gas release, and it allows more active sites to be exposed. The obtained (FeCoNiCrMn)3O4/hollow-mesoporous carbon sphere composite catalyst with the optimal HEO load (HEO/HCS-3) exhibits outstanding oxygen evolution reaction (OER) electrocatalytic performance with a low overpotential of 263 mV at 10 mA cm-2, and a small Tafel slope of 41.24 mV dec-1, better than the pure (FeCoNiCrMn)3O4 and commercial RuO2 catalyst. The long-term durability of HEO/HCS-3 is also achieved by continuous electrolysis in 1 M KOH solution for more than 100 h. The outstanding catalytic performance of the composite can be ascribed to the clever structural design and the well-matched synthetic method. This research can guide the construction of high-efficient OER catalysts.

Layer interfacing strategy to derive free standing CoFe@PANI bifunctional electrocatalyst towards oxygen evolution reaction and methanol oxidation reaction

Developing inexpensive, highly electrochemically active, and stable catalysts towards electrochemical studies remains challenge for researchers. In this regard, binder-free CoFe@PANI composite electrocatalyst is deposited on nickel foam (NF) substrate via successive electrodeposition of polyaniline (PANI) and CoFe-LDH at Room temperature (RT). As deposited binder-free CoFe@PANI electrocatalyst displays high electrocatalytic activity towards oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) in alkaline media. In CoFe@PANI structure, interfacing of high-electron conducting PANI establishes strong interconnection with CoFe-LDH by tuning electronic structures, which accelerates the electrochemical performance towards OER and MOR. For OER, CoFe@PANI requires low overpotential (η10) of 237 mV to reach current density (Id) of 10 mA cm-2 and displays low Tafel slope value of 46 mV dec-1 in 1 M KOH solution. Also, it displayed specific Id of 120 mA cm-2, when it was tested for MOR in 1 M KOH with 0.5 M methanol solution. The superior electrocatalytic activity of CoFe@PANI is mainly ascribed to high electrochemical active surface area (ECSA), abundant active sites and fast electron transfer between electrocatalyst and electrode surface. Of note, the current work may open new era for design and development of non-precious highly active and stable hybrid electrocatalysts at RT for various applications.

Binary and nanostructured NiMn perovskite fluorides as efficient electrocatalysts for urea oxidation reaction

Urea electrolysis holds tremendous promise to provide green and sustainable energy and environmental solutions, because it can simultaneously remedy urea-containing wastewater and provide energy-saving hydrogen. However, the development of this emerging technology remains challenging mainly due to a dearth of high-performance electrocatalysts for efficient urea oxidation reaction (UOR). Perovskite fluorides have the advantages of intrinsic 3D diffusion pathways, robust architecture, and tunable chemical composition, thus receiving increasing attention in many applications. In this work, the UOR performances of a series of ABF3 samples (A = K; B = Ni/Mn, Ni/Co, Co/Mn) with various compositions are investigated in a systematic fashion for the first time. Among the binary samples, KNMF41 (Ni/Mn atomic ratio = 4:1) is the optimal sample with reduced overpotential (reaching 100 mA cm-2 at 1.43 V), low Tafel slope (40 mV dec-1), enhanced reaction rate constant (6.3 × 105 cm3 mol-1 s-1), and high turnover frequency (TOF, 0.19 s-1 at 1.60 V) toward urea oxidation. By comparing with NiCo and CoMn samples, the binary NiMn design is confirmed to endow the perovskite fluoride with higher electrocatalytic activity, thanks to the directed adsorption of urea molecules on the adjacent NiMn active sites. This work presents a targeted synthetic strategy for obtaining efficient electrocatalysts.

Highly efficient sulfur-doped Ni3Fe electrocatalysts for overall water splitting: Rapid synthesis, mechanism and driven by sustainable energy

Designing efficient electrocatalysts and insight into their electrocatalytic mechanisms are significantly important for storing and converting the intermittent sustainable energy sources into clean hydrogen. In this study, we synthesize the bifunctional sulfur-doped Ni3Fe (NiFeS) electrocatalysts by a simple electrodeposition method only taking 30 s. After optimizing the components, it was found that the synthesized NiFeS electrocatalysts exhibit the excellent hydrogen and oxygen evolution reaction performances in 1.0 M potassium hydroxide solution. The results of experimental and theoretical calculations reveal that the introduced sulfur could optimize the electronic distribution, which make Ni electron-rich and Fe electron-deficient, thereby weakening the energy barriers of potential-determining steps, i.e. the absorption of H2O molecule on Ni sites for HER and formation of *OOH on Fe sites for OER, respectively. Besides, the NiFeS electrocatalysts are used as the bifunctional electrodes to water splitting, which only need 1.51 V to reach 10 mA·cm-2, and exhibits excellent durability and a >95% Faraday efficiency. Furthermore, the intermittent kinetic, wind and solar energies are used to power the assembled electrolyzer with NiFeS bi-electrodes to verify their great application potential. This work not only proved a deep insight into mechanism of the boosted electrocatalytic activities of NiFeS, but also the synthesized NiFeS electrocatalysts have great application prospect in the conversion of intermittent and sustainable energy sources into hydrogen by water electrocatalysis.

Current advancements and prospects of enzymatic and non-enzymatic electrochemical glucose sensors

This review discusses the most current developments and future perspectives in enzymatic and non-enzymatic glucose sensors, which have notably evolved over the preceding quadrennial period. Furthermore, a thorough exploration encompassed the sensor's intricate fabrication processes, the diverse range of materials employed, the underlying principles of detection, and an in-depth assessment of the sensors' efficacy in detecting glucose levels within essential bodily fluids such as human blood serums, urine, saliva, and interstitial fluids. It is worth noting that the accurate quantification of glucose concentrations within human blood has been effectively achieved by utilizing classical enzymatic sensors harmoniously integrated with optical and electrochemical transduction mechanisms. Monitoring glucose levels in various mediums has attracted exceptional attention from industrial to academic researchers for diabetes management, food quality control, clinical medicine, and bioprocess inspection. There has been an enormous demand for the creation of novel glucose sensors over the past ten years. Research has primarily concentrated on succeeding biocompatible and enhanced sensing abilities related to the present technologies, offering innovative avenues for more effective glucose sensors. Recent developments in wearable optical and electrochemical sensors with low cost, high stability, point-of-care testing, and online tracking of glucose concentration levels in biological fluids can aid in managing and controlling diabetes globally. New nanomaterials and biomolecules that can be used in electrochemical sensor systems to identify glucose concentration levels are developed thanks to advances in nanoscience and nanotechnology. Both enzymatic and non-enzymatic glucose electrochemical sensors have garnered much interest recently and have made significant strides in detecting glucose levels. In this review, we summarise several categories of non-enzymatic glucose sensor materials, including composites, non-precious transition metals and their metal oxides, hydroxides, precious metals and their alloys, carbon-based materials, conducting polymers, metal-organic framework (MOF)-based electrocatalysts, and wearable device-based glucose sensors deeply.

Enhancing Polymer Electrolyte Membrane Fuel Cells with Ionic Liquids: A Review

Polymer electrolyte membrane fuel cells (PEMFCs) represent a promising clean energy solution. However, their widespread adoption faces hurdles related to component optimization. This review explores the pivotal role of ionic liquids (ILs) in enhancing PEMFC performance, focusing on their role in polymer electrolyte membranes, catalyst modification, and other components. By addressing key obstacles, including proton conductivity, catalyst stability, and fuel crossover, ILs provide a pathway towards the widespread commercialization of PEMFCs. In the realm of PEMFC membranes, ILs have shown great potential in improving proton conductivity, mechanical strength, and thermal stability. Additionally, the utilization of ILs as catalyst modifiers has shown promise in enhancing the electrocatalytic activity of electrodes by serving as an effective stabilizer to promote the dispersion of metal nanoparticles, and reduce their agglomeration, thereby augmenting catalytic performance. Furthermore, ILs can be tailored to optimize the catalyst-support interaction, ultimately enhancing the overall fuel cell efficiency. Their unique properties, such as high oxygen solubility and low volatility, offer advantages in terms of reducing mass transport and water management issues. This review not only underscores the promising advancements achieved thus far but also outlines the challenges that must be addressed to unlock the full potential of ILs in PEMFC technology, offering a valuable resource for researchers and engineers working toward the realization of efficient and durable PEMFCs.

Synthesis and Prospects of Holey Two-dimensional Platinum-group Metals in Electrocatalysis

Advanced electrocatalysts can enable the widespread implementation of clean energy technologies. This paper reviews an emerging class of electrocatalytic materials comprising holey two-dimensional free-standing Pt-group metal (h-2D-PGM) nanosheets, which are categorically challenging to synthesize but inherently rich in all the qualities necessary to counter the kinetic and thermodynamic challenges of an electrochemical conversion process with high catalytic efficiency and stability. Although the 2D anisotropic growth of typical nonlayered metal crystals has succeeded and partly improved their atom-utilization efficiency, regularly distributed in-planar porosity can further optimize three critical factors that govern efficient electrocatalysis process: mass diffusion, electron transfer, and surface reactivity. However, producing such advanced morphological features within h-2D-PGMs is difficult unless they are specially engineered using approaches such as templating or kinetic ramification during 2D growth or controlled etching of preformed 2D-PGM solids. Therefore, this review highlighting the successful fabrication of various porous PGM nanosheets and their electrocatalytic benefits involving smart nanoscale features could inspire next-generation scientific and technological innovations toward securing a sustainable energy future.