Engineering resveratrol-loaded chitosan nanoparticles for potential use against Helicobacter pylori infection

Helicobacter pylori (H. pylori) is a microorganism directly linked to severe clinical conditions affecting the stomach. The virulence factors and its ability to form biofilms increase resistance to conventional antibiotics, growing the need for new substances and strategies for the treatment of H. pylori infection. The trans-resveratrol (RESV), a bioactive polyphenol from natural sources, has a potential activity against this gastric pathogen. Here, Chitosan nanoparticles (NP) containing RESV (RESV-NP) were developed for H. pylori management. The RESV-NP were prepared using the ionic gelation method and characterized by Dynamic Light Scattering (DLS), Nanoparticle Tracking Analysis (NTA) and, Cryogenic Transmission Electron Microscopy (Cryo - TEM). The encapsulation efficiency (EE) and in vitro release rate of RESV were quantified using high-performance liquid chromatography (HPLC). RESV-NP performance against H. pylori was evaluated by the quantification of the minimum inhibitory/bactericidal concentrations (MIC/MBC), time to kill, alterations in H. pylori morphology in its planktonic form, effects against H. pylori biofilm and in an in vitro infection model. RESV-NP cytotoxicity was evaluated against AGS and MKN-74 cell lines and by hemolysis assay. Acute toxicity was tested using Galleria mellonella model assays. RESV-NP showed a spherical shape, size of 145.3 ± 24.7 nm, polydispersity index (PDI) of 0.28 ± 0.008, and zeta potential (ZP) of + 16.9 ± 1.81 mV in DLS, while particle concentration was 3.12 x 1011 NP/mL (NTA). RESV-NP EE was 72 %, with full release within the first 5 min. In microbiological assays, RESV-NP presented a MIC/MBC of 3.9 µg/mL, a time to kill of 24 h for complete eradication of H. pylori. At a concentration of 2xMIC (7.8 µg/mL), RESV-NP completely eradicated the H. pylori biofilm, and in an in vitro infection model, RESV-NP (4xMIC - 15.6 µg/mL) showed a significant decrease in bacterial load (1 Log10CFU/mL) when compared to the H. pylori J99 control. In addition, they did not demonstrate a toxic character at MIC concentration for both cell lines. The use of the RESV-NP with mucoadhesion profile is an interesting strategy for oral administration of substances targeting gastric disorders, linked to H. pylori infections.

Polymeric nanoparticles delivery circumvents bacterial resistance to ciprofloxacin

OBJECTIVE

The efficient inhibition of bacteria and their by-products from infected root canals is hampered by the limitations of traditional root canal disinfection strategies, bacterial resistance to antibiotic drugs, and regenerative endodontics. Polymeric nanoparticles nanocarrier for controlling antibiotic drug delivery were used to overcome the limitations encountered in endodontics treatment.

BACKGROUND

Several polymeric nanoparticles have been used for the delivery of ciprofloxacin drug. The application of poly (ethylene glycol) methyl ether-block-poly(lactide-co-glycolide) (PEG-PLGA) nanoparticles has highlighted the clean and safe delivery of ciprofloxacin (CIP) hydrophilic drug for endodontics treatment. PEG/PLGA was prepared using the solid/oil/water method and the CIP was loaded into polymeric nanoparticles via an ion pairing agent.

RESULTS

The CIP-loaded PEG-PLGA nanoparticles have a spherical shape with a 120 ± 0.43 nm size, the CIP encapsulating efficiency was 63.26 ± 9.24% with a loading content of 7.75 ± 1.13%, and sustained release was achieved over 168 h which followed Higuchi model with a non-Fickian mechanism. Moreover, CIP-loaded PEG-PLGA had low cytotoxicity to the stem cells of the apical papilla.

CONCLUSION

The results conclude invigorating future perspectives of polymeric nanoparticles for a wide range of drug delivery for various disease treatments. It's anticipated that these polymeric nanoparticles may divert new expectations in the future for topical antibiotic drug delivery with discrete intracellular medicament, and a safe and clean environment.

Gaussian processes modeling for the prediction of polymeric nanoparticle formulation design to enhance encapsulation efficiency and therapeutic efficacy

Conventional drugs have been facing various drug delivery obstacles, including first-pass metabolism for oral medications, drug degradation by cellular enzymes, off-target effects, and cytotoxicity of healthy cells. Nanoparticles (NP) application in drug delivery can compensate for these drawbacks to a great extent. NPs can be fabricated using different materials and structures to achieve desired therapeutic effects. For each type of NP material, its physicochemical properties determine compatibility with specific drugs and other supplemental compositions. The optimized material selection becomes prominent in NP development to improve NP performances. Due to the nature of NP fabrication, the process is long and expensive. To accelerate NP composition optimization, machine learning (ML) techniques are among the most promising methods for efficient data predictions and optimizations.As a proof-of concept, we created Gaussian Process (GP) models to make predictions for drug encapsulation efficiency (EE%) and therapeutic efficacy of 32 poly (lactic-co-glycolic acid) (PLGA) NPs that are formed with materials with different physicochemical properties. Two model drugs, doxorubicin (DOX) and docetaxel (DTX) were loaded separately. The IC50 values for the various NPs formulations were evaluated using the OVCAR3 epithelial ovarian cancer cell line. EE% GP model has the highest prediction accuracy with the lowest normalized root-mean-squared-error (RMSE) of 0.187. The DOX and DTX IC50 GP models have normalized RMSEs of 0.296 and 0.206, respectively, which are higher than that of the EE% GP model.

Multifunctionality of cyclodextrin-based polymeric nanoparticulate delivery systems for chemotherapeutics, combination therapy, and theranostics

As cancer being the most difficult disease to treat, different kinds of medications and therapeutic approaches have been prominently developed by scientists. For certain families of drugs, such as immuno-therapeutics or antibody-drug conjugates, efficient delivery systems are required during administration to protect the drugs from chemical degradation or biological inactivation. Delivery systems with the ability to carry different therapeutics or diagnostic agents or both, hold promising potential to tackle the abnormalities behind cancer. In this context, this review provides updated insights on how cyclodextrin-based polymeric nanosystems have become an effective treatment approach against cancer. Cyclodextrins (CDs) are natural oligosaccharides that are famously exploited in pharmaceutical research due to their exceptional quality of entrapping water-insoluble molecules inside their hydrophobic core and providing enhanced solubility with the help of their hydrophilic exterior. Combining the properties of CDs with polymeric nanoparticles (PNPs) brings out excellent versatile and tunable profiles, thanks to the submicron-sized PNPs. By introducing the significance of CD as a delivery system, a collective discussion on different binding approaches and release mechanisms of CD-drug complexation, followed by their characterization studies has been done in this review. Further, in light of recent studies, the article majorly focuses on conveying how promoting CD to a polymeric and nanoscale elevates the multifunctional advantages against cancer that can be successfully applied in combination therapy and theranostics. Moreover, CD-based delivery systems including CALAA-01, CRLX101, and CRLX301, have demonstrated improved tumor targeting, reduced side effects, and prolonged drug release in preclinical studies and clinical trials.

In vitro evaluation of physicochemical-dependent effects of polymeric nanoparticles on their cellular uptake and co-localization using pulmonary calu-3 cell lines

OBJECTIVE

The study evaluated physicochemical properties of eight different polymeric nanoparticles (NPs) and their interaction with lung barrier and their suitability for pulmonary drug delivery.

METHODS

Eight physiochemically different NPs were fabricated from Poly lactic-co-glycolic acid (PLGA, PL) and Poly glycerol adipate-co-ω-pentadecalactone (PGA-co-PDL, PG) via emulsification-solvent evaporation. Pulmonary barrier integrity was investigated in vitro using Calu-3 under air-liquid interface. NPs internalization was investigated using a group of pharmacological inhibitors with subsequent microscopic visual confirmation.

RESULTS

Eight NPs were successfully formulated from two polymers using emulsion-solvent evaporation; 200, 500 and 800 nm, negatively-charged and positively-charged. All different NPs did not alter tight junctions and PG NPs showed similar behavior to PL NPs, indicating its suitability for pulmonary drug delivery. Active endocytosis uptake mechanisms with physicochemical dependent manner were observed. In addition, NPs internalization and co-localization with lysosomes were visually confirmed indicating their vesicular transport.

CONCLUSION

PG and PL NPs had shown no or low harmful effects on the barrier integrity, and with effective internalization and vesicular transport, thus, prospectively can be designed for pulmonary delivery applications.

Light-responsive polymeric nanoparticles for retinal drug delivery: design cues, challenges and future perspectives

A multitude of sight-threatening retinal diseases, affecting hundreds of millions around the globe, lack effective pharmacological treatments due to ocular barriers and common drug delivery limitations. Polymeric nanoparticles (PNPs) are versatile drug carriers with sustained drug release profiles and tunable physicochemical properties which have been explored for ocular drug delivery to both anterior and posterior ocular tissues. PNPs can incorporate a wide range of drugs and overcome the challenges of conventional retinal drug delivery. Moreover, PNPs can be engineered to respond to specific stimuli such as ultraviolet, visible, or near-infrared light, and allow precise spatiotemporal control of the drug release, enabling tailored treatment regimens and reducing the number of required administrations. The objective of this study is to emphasize the therapeutic potential of light-triggered drug-loaded polymeric nanoparticles to treat retinal diseases through an exploration of ocular pathologies, challenges in drug delivery, current production methodologies and recent applications. Despite challenges, light-responsive PNPs hold the promise of substantially enhancing the treatment landscape for ocular diseases, aiming for an improved quality of life for patients.

Microfluidic nanoparticle synthesis for oral solid dosage forms: A step toward clinical transition processes

Nanomedicine provides various opportunities for addressing medical challenges associated with drug bioavailability, stability, and efficacy. In particular, oral nanoparticles (NPs) represent an alternative strategy to enhance the solubility and stability of active ingredients through the gastrointestinal tract. The nanocarriers could be used for both local and systemic targeting, enabling controlled release of encapsulated drugs. This approach allows more efficient therapies. In this work, we aim to develop reliable oral solid dosage forms incorporating NPs produced by either one pot synthesis or continuous production, following protocols that yield highly consistent outcomes, promoting their technology transfer and clinical use. Microfluidics technology was selected to allow an automated and highly productive synthetic approach suitable for the highly throughput production. In particular, innovative systems, which combine advantage of NPs and solid dosage formulation, were designed, developed, and characterized demonstrating the possibility to obtaining oral administration. The resulting NPs were thus carried on oral dosage forms, i.e., pellets and minitablets. NPs resulted stable after dosage forms manufacturing, leading to confidence also on protection of encapsulated drugs. Indomethacin was used as a tracer to test biopharmaceutical behaviour. Anti-inflammatories or cytotoxic chemotherapeutics could be vehiculated leading to a breakthrough in the treatment of severe diseases allowing the oral administration of these drugs. We believe that the advancement achieved with the results of our work paves the way for the progression of nanoproducts into clinical transition processes.

mRNA delivery systems for cancer immunotherapy: Lipid nanoparticles and beyond

mRNA-based vaccines are emerging as a promising alternative to standard cancer treatments and the conventional vaccines. Moreover, the FDA-approval of three nucleic acid based therapeutics (Onpattro, BNT162b2 and mRNA-1273) has further increased the interest and trust on this type of therapeutics. In order to achieve a significant therapeutic efficacy, the mRNA needs from a drug delivery system. In the last years, several delivery platforms have been explored, being the lipid nanoparticles (LNPs) the most well characterized and studied. A better understanding on how mRNA-based therapeutics operate (both the mRNA itself and the drug delivery system) will help to further improve their efficacy and safety. In this review, we will provide an overview of what mRNA cancer vaccines are and their mode of action and we will highlight the advantages and challenges of the different delivery platforms that are under investigation.

Polymer-mediated nanoformulations: a promising strategy for cancer immunotherapy

Engineering polymer-based nano-systems have attracted many researchers owing to their unique qualities like shape, size, porosity, mechanical strength, biocompatibility, and biodegradability. Both natural and synthetic polymers can be tuned to get desired surface chemistry and functionalization to improve the efficacy of cancer therapy by promoting targeted delivery to the tumor site. Recent advancements in cancer immunoediting have been able to manage both primary tumor and metastatic lesions via activation of the immune system. The combinations of nano-biotechnology and immunotherapeutic agents have provided positive outcomes by enhancing the host immune response in cancer therapy. The nanoparticles have been functionalized using antibodies, targeted antigens, small molecule ligands, and other novel agents that can interact with biological systems at nanoscale levels. Several polymers, such as polyethylene glycol (PEG), poly(lactic-co-glycolic acid) (PLGA), poly(ε-caprolactone) (PCL), and chitosan, have been approved by the Food and Drug Administration for clinical use in biomedicine. The polymeric nanoformulations such as polymers-antibody/antigen conjugates and polymeric drug conjugates are currently being explored as nanomedicines that can target cancer cells directly or target immune cells to promote anti-cancer immunotherapy. In this review, we focus on scientific developments and advancements on engineered polymeric nano-systems in conjugation with immunotherapeutic agents targeting the tumor microenvironment to improve their efficacy and the safety for better clinical outcomes.

The application of nanoparticles as advanced drug delivery systems in Attenuating COPD

Chronic Obstructive Pulmonary Disease (COPD) is a dilapidating condition which is characterized by inflammation, an excess in free radical generation and airway obstruction. Currently, the drugs commercially available for the management of COPD pose several limitations such as systemic adverse effects, including bone density loss and an increased risk of developing pneumonia. Moreover, another limitation includes the need for regular and frequent dosing regimens; which can affect the adherence to the therapy. Furthermore, these current treatments provide symptomatic relief; however, they cannot stop the progression of COPD. Comparatively, nanoparticles (NPs) provide great therapeutic potential to treat COPD due to their high specificity, biocompatibility, and higher bioavailability. Furthermore, the NP-based drug delivery systems involve less frequent dosing requirements and in smaller doses which assist in minimizing side effects. In this review, the benefits and limitations of conventional therapies are explored, while providing an in-depth insight on advanced applications of NP-based systems in the treatment of COPD.

Co-Packaged PARP inhibitor and photosensitizer for targeted photo-chemotherapy of 3D ovarian cancer spheroids

BACKGROUND

Within the last decade, poly(ADP-ribose) polymerase inhibitors (PARPi) have emerged in the clinic as an effective treatment for numerous malignancies. Preclinical data have demonstrated powerful combination effects of PARPi paired with photodynamic therapy (PDT), which involves light-activation of specialized dyes (photosensitizers) to stimulate cancer cell death through reactive oxygen species generation.

RESULTS

In this report, the most potent clinical PARP inhibitor, talazoparib, is loaded into the core of a polymeric nanoparticle (NP-Tal), which is interfaced with antibody-photosensitizer conjugates (photoimmunoconjugates, PICs) to form PIC-NP-Tal. In parallel, a new 3D fluorescent coculture model is developed using the parental OVCAR-8-DsRed2 and the chemo-resistant subline, NCI/ADR-RES-EGFP. This model enables quantification of trends in the evolutionary dynamics of acquired chemoresistance in response to various treatment regimes. Results reveal that at a low dosage (0.01 μM), NP-Tal kills the parental cells while sparing the chemo-resistant subline, thereby driving chemoresistance. Next, PIC-NP-Tal and relevant controls are evaluated in the 3D coculture model at multiple irradiation doses to characterize effects on total spheroid ablation and relative changes in parental and subline cell population dynamics. Total spheroid ablation data shows potent combination effects when PIC and NP-Tal are co-administered, but decreased efficacy with the conjugated formulation (PIC-NP-Tal). Analysis of cell population dynamics reveals that PIC, BPD + NP-Tal, PIC + NP-Tal, and PIC-NP-Tal demonstrate selection pressures towards chemoresistance.

CONCLUSIONS

This study provides key insights into manufacturing parameters for PARPi-loaded nanoparticles, as well as the potential role of PDT-based combination therapies in the context of acquired drug resistance.

Nanoparticles targeting the intestinal Fc receptor enhance intestinal cellular trafficking of semaglutide

Semaglutide is the first oral glucagon-like peptide-1 (GLP-1) analog commercially available for the treatment of type 2 diabetes. In this work, semaglutide was incorporated into poly(lactic-co-glycolic acid)-poly(ethylene glycol) (PLGA-PEG) nanoparticles (NPs) to improve its delivery across the intestinal barrier. The nanocarriers were surface-decorated with either a peptide or an affibody that target the human neonatal Fc receptor (hFcRn), located on the luminal cell surface of the enterocytes. Both ligands were successfully conjugated with the PLGA-PEG via maleimide-thiol chemistry and thereafter, the functionalized polymers were used to produce semaglutide-loaded NPs. Monodisperse NPs with an average size of 170 nm, neutral surface charge and 3% of semaglutide loading were obtained. Both FcRn-targeted NPs exhibited improved interaction and association with Caco-2 cells (cells that endogenously express the hFcRn), compared to non-targeted NPs. Additionally, the uptake of FcRn-targeted NPs was also observed to occur in human intestinal organoids (HIOs) expressing hFcRn through microinjection into the lumen of HIOs, resulting in potential increase of semaglutide permeability for both ligand-functionalized nanocarriers. Herein, our study demonstrates valuable data and insights that the FcRn-targeted NPs has the capacity to promote intestinal absorption of therapeutic peptides.

The Know-how of Polymeric Nanocarrier Based Vaginal Drug Delivery System: Pitfalls, Challenges and Trends

OBJECTIVE

Gynecological health is a global concern, and thus, the formulator researcher strives to improve the quality of life through innovative feminine pharmaceutical formulations. Vaginal delivery appears to be one of the vital strategies for local and systemic action of the therapeutically active agent. The rich vascular network, mucosal permeability, bypass of hepatic first-pass effect, and low enzymatic activity are the exclusive advantages of the vaginal route. But certain hindrances truncate the vaginal route, such as physiological factors including lower pH, self-cleansing mucus with constant secretion, and varying thickness of mucus layer due to menstrual cycle and microbiota. Significance of Review: This present review envisages the advances in the polymeric nanocarriers in the delivery to the vaginal route. Polymeric (mucoadhesive and PEGylated, etc.) nanocarriers have been recently utilized for drug delivery purposes. The modernized analysis of the updated advancements in the polymeric nanocarrier-based vaginal drug delivery system with the budding development is compiled in the present review.

RESULT

The literature search reveals that the novel polymeric nanocarrier design strategies currently being proposed to perk up the delivery of customary drugs through the vaginal route prove effective.

CONCLUSION

Polymeric nanocarrier for vaginal delivery has provided better therapeutic efficacy due to higher drug residence, improved permeation, and sustained release of the active therapeutic agent. The polymeric nanocarriers can deliver different proteins, peptides, nuclear materials, hormones, etc., vaginally that are difficult for administration.

Folic acid-chitosan functionalized polymeric nanocarriers to treat colon cancer

In the present study, polymeric nanoparticles loaded with IRI and quercetin, a p-gp inhibitor, were developed to target folate receptors expressed by colon cancer cells for oral targeted delivery. This work reports the development of PNPs with an entrapment efficiency of 41.26 ± 0.56 % for IRI and 55.83 ± 4.51 for QT. PNPs were further surface modified using chitosan-folic acid conjugates for better targetability to obtain folic acid-chitosan coated nanoparticles. DLS and FeSEM revealed particles in the nanometric size range with spherical morphology, while FTIR and DSC provided details on their structure and encapsulation. In vitro drug release studies confirmed a sustained release pattern of IRI and QT, while cell line studies confirmed the superiority of C-FA-PNPs when tested on Caco2 cells. Pharmacodynamic studies in colon cancer induced rats showed similar efficacy for PNPs and C-FA-PNPs. Further examination from a bio-distribution study in healthy rats, revealed the failure of C-FA-PNPs to deliver the drugs to the colon adequately, while the PNPs improved the available concentration of IRI at the colon by almost 1.8 folds when compared to the available marketed product. Hence, the developed PNP formulation sticks out as a plausible substitute for the intravenous dosage forms of IRI which have been conventionally prevailing.

Poly(ethylene glycol)-b-poly(epsilon-caprolactone) nanoparticles as a platform for the improved oral delivery of cannabidiol

Cannabidiol (CBD), a non-psychoactive constituent of Cannabis, has proven neuroprotective, anti-inflammatory and antioxidant properties though his therapeutic use, especially by the oral route, is still challenged by the poor aqueous solubility that results in low oral bioavailability. In this work, we investigate the encapsulation of CBD within nanoparticles of a highly hydrophobic poly(ethylene glycol)-b-poly(epsilon-caprolactone) block copolymer produced by a simple and reproducible nanoprecipitation method. The encapsulation efficiency is ~ 100% and the CBD loading 11% w/w (high performance liquid chromatography). CBD-loaded nanoparticles show a monomodal size distribution with sizes of up to 100 nm (dynamic light scattering), a spherical morphology, and the absence of CBD crystals (high resolution-scanning electron microscopy and cryogenic-transmission electron microscopy) which is in line with a very efficient nanoencapsulation. Then, the CBD release profile from the nanoparticles is assessed under gastric- and intestine-like conditions. At pH 1.2, only 10% of the payload is released after 1 h. Conversely, at pH 6.8, a release of 80% is recorded after 2 h. Finally, the oral pharmacokinetics is investigated in rats and compared to a free CBD suspension. CBD-loaded nanoparticles lead to a statistically significant ~ 20-fold increase of the maximum drug concentration in plasma (Cmax) and a shortening of the time to the Cmax (tmax) from 4 to 0.3 h, indicating a more complete and faster absorption than in free form. Moreover, the area-under-the-curve (AUC), a measure of oral bioavailability, increased by 14 times. Overall results highlight the promise of this simple, reproducible, and scalable nanotechnology strategy to improve the oral performance of CBD with respect to common oily formulations and/or lipid-based drug delivery systems associated with systemic adverse effects.

Influence of drug molecular weight on self-assembly and intestinal permeation of polymer-based nanocarriers

For oral delivery, the physicochemical properties of nanocarriers are decisive factors for permeation through the intestinal epithelium. These properties are determined by the composition of the nanocarriers as well as by the process parameters during their self-assembly. For macromolecular drugs, there is still little understanding of the drug-polymer interactions during nanocarrier self-assembly and the effects on carrier properties. In this study, the effect of drug molecular weight on nanocarrier self-assembly, physicochemical properties of nanocarriers as well as their permeation across the intestinal epithelium was investigated. Our results show that the drug molecular weight impacts the physicochemical properties of nanocarriers. Further, the physicochemical properties of the nanocarriers, governed by the molecular weight of the drug, determine their permeation properties across the intestinal epithelium. Comparative in vitro and ex vivo studies revealed that intestinal absorption is dependent on both, the properties of the tissue as well as properties of the carrier system. In conclusion, the molecular weight of drug payload is a key factor determining the physiochemical properties of polymeric nanocarriers and is closely linked to their oral absorption. Using different preclinical models to evaluate intestinal permeation of nanocarriers allows for novel insights into key formulation properties governing oral bioavailability.

A state-of-the-art analysis of pharmacological delivery and artificial intelligence techniques for inner ear disease treatment

Over the last several decades, both the academic and therapeutic fields have seen significant progress in the delivery of drugs to the inner ear due to recent delivery methods established for the systemic administration of drugs in inner ear treatment. Novel technologies such as nanoparticles and hydrogels are being investigated, in addition to the traditional treatment methods. Intracochlear devices, which utilize current developments in microsystems technology, are on the horizon of inner ear drug delivery methods and are designed to provide medicine directly into the inner ear. These devices are used for stem cell treatment, RNA interference, and the delivery of neurotrophic factors and steroids during cochlear implantation. An in-depth analysis of artificial neural networks (ANNs) in pharmaceutical research may be found in ANNs for Drug Delivery, Design, and Disposition. This prediction tool has a great deal of promise to assist researchers in more successfully designing, developing, and delivering successful medications because of its capacity to learn and self-correct in a very complicated environment. ANN achieved a high level of accuracy exceeding 0.90, along with a sensitivity of 95% and a specificity of 100%, in accurately distinguishing illness. Additionally, the ANN model provided nearly perfect measures of 0.99%. Nanoparticles exhibit potential as a viable therapeutic approach for bacterial infections that are challenging to manage, such as otitis media. The utilization of ANNs has the potential to enhance the effectiveness of nanoparticle therapy, particularly in the realm of automated identification of otitis media. Polymeric nanoparticles have demonstrated effectiveness in the treatment of prevalent bacterial infections in pediatric patients, suggesting significant potential for forthcoming therapeutic interventions. Finally, this study is based on a research of how inner ear diseases have been treated in the last ten years (2012-2022) using machine learning.

Development of an oral nanovaccine for dogs against Echinococcus granulosus

Dogs are the main source of animal and human cystic echinococcosis caused by the Cestode parasite Echinococcus granulosus. Dog vaccination seems to be a good strategy to control this parasitic disease. Here we present the development of a polymeric nanoparticle-based oral vaccine for dogs against Echinococcus granulosus delivered in enteric-coated capsules. To achieve our target, we encapsulated two recombinant antigens into biodegradable polymeric nanoparticles in the presence of Monophosphoryl lipid A as an adjuvant to ensure efficient delivery and activation of a protective mucosal immune response. The formulated delivery system showed a nanoparticle size less than 200 nm with more than 80 % antigen encapsulation efficiency and conserved integrity and immunogenicity. The nanoparticle surface was coated with chitosan to enhance adhesion to the gut mucosa and a subsequent antigen delivery. Chitosan-coated nanoparticles showed a higher cell internalization in murine macrophages and dendritic cells as well as a higher penetration into Caco-2 cells in vitro. Antigen-loaded nanoparticles were freeze-dried and enteric-coated capsules were filled with the obtained powder. The obtained results show a promising nanoparticles delivery system for oral vaccination.

Nano-mediated strategy for targeting and treatment of non-small cell lung cancer (NSCLC)

Lung cancer is the most common type of cancer, with over 2.1 million cases diagnosed annually worldwide. It has a high incidence and mortality rate, leading to extensive research into various treatment options, including the use of nanomaterial-based carriers for drug delivery. With regard to cancer treatment, the distinct biological and physico-chemical features of nano-structures have acquired considerable impetus as drug delivery system (DDS) for delivering medication combinations or combining diagnostics and targeted therapy. This review focuses on the use of nanomedicine-based drug delivery systems in the treatment of lung cancer, including the use of lipid, polymer, and carbon-based nanomaterials for traditional therapies such as chemotherapy, radiotherapy, and phototherapy. The review also discusses the potential of stimuli-responsive nanomaterials for drug delivery in lung cancer, and the limitations and opportunities for improving the design of nano-based materials for the treatment of non-small cell lung cancer (NSCLC).

The effect of electrostatic high pressure nebulization on the stability, activity and ex vivo distribution of ionic self-assembled nanomedicines

Pressurized intraperitoneal aerosol chemotherapy (PIPAC) is applied to treat unresectable peritoneal metastasis (PM), an advanced, end-stage disease with a poor prognosis. Electrostatic precipitation of the aerosol (ePIPAC) is aimed at improving the intraperitoneal (IP) drug distribution and tumor penetration. Also, the combination of nanoparticles (NPs) as drug delivery vehicles and IP aerosolization as administration method has been proposed as a promising tool to treat PM. There is currently limited knowledge on how electrostatic precipitation (ePIPAC) and high pressure nebulization (PIPAC) affects the performance of electrostatically formed complexes. Therefore, the stability, in vitro activity and ex vivo distribution and tissue penetration of negatively charged cisPt-pArg-HA NPs and positively charged siRNA-RNAiMAX NPs was evaluated following PIPAC and ePIPAC. Additionally, a multidirectional Medspray® nozzle was developed and compared with the currently used Capnopen® nozzle. For both NP types, PIPAC and ePIPAC did not negatively influence the in vitro activity, although limited aggregation of siRNA-RNAiMAX NPs was observed following nebulization with the Capnopen®. Importantly, ePIPAC was linked to a more uniform distribution and higher tissue penetration of the NPs aerosolized by both nozzles, independent on the NPs charge. Finally, compared to the Capnopen®, an increased NP deposition was observed at the top of the ex vivo model following aerosolization with the Medspray® nozzle, which indicates that this device possesses great potential for IP drug delivery purposes. STATEMENT OF SIGNIFICANCE: Aerosolized drug delivery in the peritoneal cavity holds great promise to treat peritoneal cancer. In addition, electrostatic precipitation of the aerosol to the peritoneal tissue is aimed at improving the drug distribution and tumor penetration. The combination of nanoparticles (NPs), which are nano-sized drug delivery vehicles, and aerosolization has been proposed as a promising tool to treat peritoneal cancer. However, there is currently limited knowledge on how electrostatic precipitation and aerosolization affect the performance of electrostatically formed NPs. Therefore, the stability, activity, distribution and penetration of negatively and positively charged NPs was evaluated after aerosolization and electrostatic precipitation. Additionally, to further optimize the local drug distribution, a multidirectional spray nozzle was developed and compared with the currently used nozzle.

Nanoparticles targeting Sialyl-Tn for efficient tyrosine kinase inhibitor delivery in gastric cancer

Gastric cancer (GC) is the fourth leading cause of cancer-related deaths worldwide and, therefore, it is urgent to develop new and more efficient therapeutic approaches. Foretinib (FRT) is an oral multikinase inhibitor targeting MET (hepatocyte growth factor receptor) and RON (recepteur d'origine nantais) receptor tyrosine kinases (RTKs) that has been used in clinical trials for several solid tumors. Targeted uptake of therapeutic polymeric nanoparticles (NPs) represents a powerful approach in cancer cell drug delivery. Previously, a nanodelivery system composed of polymeric NPs functionalized with B72.3 antibody, which targets the tumor-associated antigen Sialyl-Tn (STn), has been developed. Herein, these NPs were loaded with FRT to evaluate its capacity in delivering the drug to multicellular tumors spheroids (MCTS) and mouse models. The data indicated that B72.3 functionalized FRT-loaded PLGA-PEG-COOH NPs (NFB72.3) specifically target gastric MCTS expressing the STn glycan (MKN45 SimpleCell (SC) cells), leading to a decrease in phospho-RTKs activation and reduced cell viability. In vivo evaluation using MKN45 SC xenograft mice revealed that NFB72.3 were able to decrease tumor growth, reduce cell proliferation and tumor necrosis. NFB72.3-treated tumors also showed inactivation of phospho-MET and phospho-RON. This study demonstrates the value of using NPs targeting STn for FRT delivery, highlighting its potential as a therapeutic application in GC. STATEMENT OF SIGNIFICANCE: Despite the advances in gastric cancer therapeutics, it remains one of the diseases with the highest incidence and mortality in the world. Combining targeted therapies with a controlled drug release is an attractive strategy to reduce drug cytotoxic effects and improve specific drug delivery efficiency to the cancer cells. Thus, we developed nanoparticles loaded with a tyrosine kinase inhibitor and targeting a specific tumor glycan exclusive of cancer cells. In in vivo gastric cancer xenograft mice models, these nanoparticles efficiently reduced tumor growth, cell proliferation and tumor necrosis area and inactivated phosphorylation of targeting receptors. This approach represents an innovative therapeutic strategy with high impact in gastric cancer.

Surface antibody changes protein corona both in human and mouse serum but not final opsonization and elimination of targeted polymeric nanoparticles

BACKGROUND

Nanoparticles represent one of the most important innovations in the medical field. Among nanocarriers, polymeric nanoparticles (PNPs) attracted much attention due to their biodegradability, biocompatibility, and capacity to increase efficacy and safety of encapsulated drugs. Another important improvement in the use of nanoparticles as delivery systems is the conjugation of a targeting agent that enables the nanoparticles to accumulate in a specific tissue. Despite these advantages, the clinical translation of therapeutic approaches based on nanoparticles is prevented by their interactions with blood proteins. In fact, the so-formed protein corona (PC) drastically alters the biological identity of the particles. Adsorbed activated proteins of the complement cascade play a pivotal role in the clearance of nanoparticles, making them more easily recognized by macrophages, leading to their rapid elimination from the bloodstream and limiting their efficacy. Since the mouse is the most used preclinical model for human disease, this work compared human and mouse PC formed on untargeted PNPs (uPNPs) and targeted PNPs (tPNPs), paying particular attention to complement activation.

RESULTS

Mouse and human serum proteins adsorbed differently to PNPs. The differences in the binding of mouse complement proteins are minimal, whereas human complement components strongly distinguish the two particles. This is probably due to the human origin of the Fc portion of the antibody used as targeting agent on tPNPs. tPNPs and uPNPs mainly activate complement via the classical and alternative pathways, respectively, but this pattern did not affect their binding and internalization in macrophages and only a limited consumption of the activity of the human complement system was documented.

CONCLUSIONS

The results clearly indicate the presence of complement proteins on PNPs surface but partially derived from an unspecific deposition rather than an effective complement activation. The presence of a targeting antibody favors the activation of the classical pathway, but its absence allows an increased activation of the alternative pathway. This results in similar opsonization of both PNPs and similar phagocytosis by macrophages, without an impairment of the activity of circulating complement system and, consequently, not enhancing the susceptibility to infection.

Development of a Compensated Förster Resonance Energy Transfer Imaging for Improved Assessment of the Intrapulmonary Distribution of Polymeric Nanoparticles

Inhalation-based drug delivery systems have gained attention as potential therapeutic options for various respiratory diseases. Among these systems, nanoparticles are being explored as drug carriers because of their ability to deliver therapeutic agents directly to the lungs. It is essential to accurately evaluate the intrapulmonary behavior of nanoparticles to optimize drug delivery and achieve selective targeting of lung lesions. Prior research used the Förster resonance energy transfer (FRET) phenomenon to study the in vivo behavior of nanoparticles as drug carriers. In this study, image reconstruction involving bleed-through compensation was used to quantitatively assess the behavior of FRET nanoparticles in the lungs. When the nanoparticles for FRET fluorescence imaging, which employed 1,1'-dioctadecyl-3,3,3',3'-tetramethylindodicarbocyanine, 4-chlorobenzenesulfonate salt (DiD) as the donor and as 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine iodide (DiR) the acceptor, were administered to mouse lungs, whole-body in vivo imaging could not compensate for the influence of respiration and heartbeat. However, ex vivo imaging of excised lungs enabled the quantitative evaluation of the time-concentration profiles and distribution of nanoparticles within the lungs. This imaging technique is particularly useful for the development of inhalable nanoparticles that specifically target the lesions and exhibit controlled-release capabilities within the lungs.

pH-triggered polymeric nanoparticles in gel for preventing vaginal transmission of HIV and unintended pregnancy

Human Immunodeficiency Virus/Acquired Immunodeficiency Syndrome (HIV/ AIDS) and unplanned pregnancy affect female reproductive health globally. A single product providing a dual purpose of HIV prophylaxis and contraception may improve adherence to the therapy. Thus, we formulated a female-centric multipurpose prevention technology (MPT) comprising of nanoparticle loaded vaginal gel formulation acting as a contraceptive and microbicide. Eudragit® S100 nanoparticles of Atazanavir sulphate (ATZ; antiviral) and Fluoxetine hydrochloride (FLX; repurposed spermicide) were prepared for pH dependent drug release and loaded in carrageenan and HPMC K200M gel. The particle size of ATZ and FLX nanoparticles was 396.7 ± 20.64 nm and 226.5 ± 2.08 nm respectively. The in vitro release of the gel formulation in simulated seminal fluid (pH 7.6) showed 96.16% and 95.98% release of ATZ and FLX respectively at the end of 8 h. The in vitro anti-HIV and spermicidal activity of the formulation was above 80% for low drug concentrations. In vivo studies on murine model showed no signs of inflammation or vaginal epithelial injury. Curcumin based imaging confirmed the retention of the formulation in the reproductive tract of mice with minimal leakage. Nanoparticles in gel enabled non-invasive and localised delivery with minimal side effects and can be an effective prophylactic therapy.

Emerging strategies to fabricate polymeric nanocarriers for enhanced drug delivery across blood-brain barrier: An overview

Blood-brain barrier (BBB) serves as an essential interface between central nervous system (CNS) and its periphery, allowing selective permeation of ions, gaseous molecules, and other nutrients to maintain metabolic functions of brain. Concurrently, it restricts passage of unsolicited materials from bloodstream to CNS which could otherwise lead to neurotoxicity. Nevertheless, in the treatment of neurodegenerative diseases such as Parkinson's, Alzheimer's, diffuse intrinsic pontine glioma, and other brain cancers, drugs must reach CNS. Among various materials developed for this purpose, a few judiciously selected polymeric nanocarriers are reported to be highly prospective to facilitate BBB permeation. However, the challenge of transporting drug-loaded nanomaterials across this barrier remains formidable. Herein a concise analysis of recently employed strategies for designing polymeric nanocarriers to deliver therapeutics across BBB is presented. Impacts of 3Ss, namely, size, shape, and surface charge of polymeric nanocarriers on BBB permeation along with different ligands used for nanoparticle surface modification to achieve targeted delivery have been scrutinized. Finally, we elucidated future research directions in the context of designing smart polymeric nanocarriers for BBB permeation. This work aims to guide researchers engaged in polymeric nanocarrier design, helping them navigate where to begin, what challenges to address, and how to proceed effectively.

Developing a robust in vitro release method for a polymeric nanoparticle: Challenges and learnings

Nanomedicines have emerged as a promising approach for targeted therapeutic delivery and specifically as a beneficial alternative to conventional cancer therapies as they can deliver higher concentrations of chemotherapeutic agents at the tumour site compared to healthy tissue, thus providing improved drug efficacy and lower systemic toxicity. Long acting injectables are increasingly becoming the focus of pharmaceutical research, as they can reduce dosing frequency and improve the life quality of patients. Development of an in vitro release (IVR) method for modified release nanomedicines is challenging because of the uniqueness and range of different formulation design approaches, as well as the complex nature of drug release mechanisms which may result in inherent variability. Regulatory guidance on the development of dissolution or release methods for parenteral products is limited relative to oral products. This article details the extensive in vitro release method development work conducted on a polymeric nanoparticle to develop the release media composition and selection of suitable apparatus and sampling technique to separate the released drug from the formulation. The aim was to develop a suitably robust analytical method that generated clinically relevant in vitro release data.

In vivo evaluation of time-dependent antithrombotic effect of rivaroxaban-loaded poly(lactic-co-glycolic acid)/sodium lauryl sulfate or didodecyl dimethylammonium bromide nanoparticles in Wistar rats

Rivaroxaban (RVX), an oral direct factor Xa inhibitor, is being explored as an alternative to traditional anticoagulans. However, RVX still faces pharmacokinetic limitations and adverse effects, highlighting the need for more effective formulations. In this regard, pharmaceutical nanotechnology, particularly the use of polymeric nanoparticles (PNPs), offers a promising approach for optimizing RVX delivery. This study aimed to develop and physicochemically characterize RVX-loaded poly(lactic-co-glycolic acid) (PLGA)/sodium lauryl sulfate (SLS) or didodecyl dimethylammonium bromide (DMAB) nanoparticles, and also evaluate their pharmacological and toxicological profiles as a potential therapeutic strategy. The PNPs exhibited sizes below 300 nm and spherical morphology, with both negative and positive surface charges, according to surfactant used. They demonstrated high encapsulation efficiency and suitable yields, as well as rapid initial liberation followed by sustained release in different pH environments. Importantly, in vivo evaluations revealed a time-dependent antithrombotic effect surpassing the free form of RVX when administered orally in SLS or DMAB PNP. No hemolytic or cytotoxic effects were observed at various concentrations of the PNPs. Interestingly, the PNPs did not induce hemorrhagic events or cause liver enzyme alterations in vivo. These findings suggest that RVX-loaded SLS or DMAB PNPs are promising innovative therapeutic alternatives for the treatment of thromboembolic diseases.

Polymeric nanoparticles for DNA vaccine-based cancer immunotherapy: a review

Cancer is one of the leading causes of death and mortality in the world. There is an essential need to develop new drugs or therapeutic approaches to manage treatment-resistant cancers. Cancer immunotherapy is a type of cancer treatment that uses the power of the body's immune system to prevent, control, and eliminate cancer. One of the materials used as a vaccine in immunotherapy is DNA. The application of polymeric nanoparticles as carriers for DNA vaccines could be an effective therapeutic approach to activate immune responses and increase antigen presentation efficiency. Various materials have been used as polymeric nanoparticles, including: chitosan, poly (lactic-co-glycolic acid), Polyethylenimine, dendrimers, polypeptides, and polyesters. Application of these polymer nanoparticles has several advantages, including increased vaccine delivery, enhanced antigen presentation, adjuvant effects, and more sustainable induction of the immune system. Besides many clinical trials and commercial products that were developed based on polymer nanoparticles, there is still a need for more comprehensive studies to increase the DNA vaccine efficiency in cancer immunotherapy using this type of carrier.

A Comprehensive Review on Prospects of Polymeric Nanoparticles for Treatment of Diabetes Mellitus: Receptors-Ligands, In vitro & In vivo Studies

As per International Diabetes Federation Report 2022, worldwide diabetes mellitus (DM) caused 6.7M moralities and ~537M adults suffering from diabetes mellitus. It is a chronic condition due to β-cell destruction or insulin resistance that leads to insulin deficiency. This review discusses Type-1 DM and Type-2 DM pathophysiology in detail, with challenges in management and treatment. The toxicity issues of conventional drugs and insulin injections are complex to manage. Thus, there is a need for technological intervention. In recent years, nanotechnology has found a fruitful advancement of novel drug delivery systems that might potentially increase the efficacy of anti-diabetic drugs. Amongst nano-formulations, polymeric nanoparticles have been studied to enhance the bioavailability and efficacy of anti-diabetic drugs and insulin. In the present review, we summarized polymeric nanoparticles with different polymers utilized to deliver anti-diabetic drugs with in vitro and in vivo studies. Furthermore, this review also includes the role of receptors and ligands in diabetes mellitus and the utilization of receptor-ligand interaction to develop targeted nanoparticles. Additionally, we discussed the utility of nanoparticles for the delivery of phytoconstituents which aids in protecting the oxidative stress generated during diabetes mellitus.

Ionizable polymeric nanocarriers for the codelivery of bi-adjuvant and neoantigens in combination tumor immunotherapy

Ionizable lipid nanocarriers have made historical contribution to COVID-19 mRNA vaccines. Here, we report ionizable polymeric nanoparticles that co-deliver bi-adjuvant and neoantigen peptides for cancer immunotherapy in combination with immune checkpoint blockade (ICB). Current cancer ICB benefits only a small subset of patients, largely due to a lack of pre-existing target cells and checkpoint targets for ICB, tumor antigenic heterogeneity, and tumor immunosuppression. Therapeutic vaccines hold the potential to enhance ICB therapeutic efficacy by expanding antitumor cell repertoires, upregulating immune checkpoint levels and hence sensitizing ICB, and reducing tumor immunosuppression. Chemically defined peptide vaccines are attractive, but their current therapeutic efficacy has been limited due to 1) poor vaccine delivery to immunomodulatory lymph nodes (LNs) and antigen (Ag)-presenting cells (APCs), 2) poor immunostimulant adjuvant efficacy with restricted target cell subsets in humans, 3) limited adjuvant/Ag codelivery to enhance Ag immunogenicity, and 4) limited ability to overcome tumor antigenic heterogeneity. Here, we developed nanovaccines (NVs) using pH-responsive polymeric micellular nanoparticles (NPs) for the codelivery of bi-adjuvant [Toll-like receptor (TLR) 7/8 agonist R848 and TLR9 agonist CpG] and peptide neoantigens (neoAgs) to draining LNs for efficient Ag presentation in a broad range of APC subsets. These NVs potentiated the immunogenicity of peptide Ags and elicits robust antitumor T cell responses with memory, and remodeled the tumor immune milium with reduced tumor immunosuppression. As a result, NVs significantly enhanced ICB therapeutic efficacy for murine colorectal tumors and orthotopic glioblastoma multiforme (GBM). These results suggest marked potential of bi-adjuvant/neoAg-codelivering NVs for combination cancer immunotherapy.

Rational nanoparticle design: Optimization using insights from experiments and mathematical models

Polymeric nanoparticles are highly tunable drug delivery systems that show promise in targeting therapeutics to specific sites within the body. Rational nanoparticle design can make use of mathematical models to organize and extend experimental data, allowing for optimization of nanoparticles for particular drug delivery applications. While rational nanoparticle design is attractive from the standpoint of improving therapy and reducing unnecessary experiments, it has yet to be fully realized. The difficulty lies in the complexity of nanoparticle structure and behavior, which is added to the complexity of the physiological mechanisms involved in nanoparticle distribution throughout the body. In this review, we discuss the most important aspects of rational design of polymeric nanoparticles. Ultimately, we conclude that many experimental datasets are required to fully model polymeric nanoparticle behavior at multiple scales. Further, we suggest ways to consider the limitations and uncertainty of experimental data in creating nanoparticle design optimization schema, which we call quantitative nanoparticle design frameworks.

Levodopa-loaded nanoparticles for the treatment of Parkinson's disease

Parkinson's disease (PD) is a neurodegenerative disorder characterized by degeneration of dopaminergic neurons in the substantia nigra pars compacta (SNpc) resulting in dopamine (DA) deficiency, which manifests itself in motor symptoms including tremors, rigidity and bradykinesia. Current PD treatments aim at symptom reduction through oral delivery of levodopa (L-DOPA), a precursor of DA. However, L-DOPA delivery to the brain is inefficient and increased dosages are required as the disease progresses, resulting in serious side effects like dyskinesias. To improve PD treatment efficacy and to reduce side effects, recent research focuses on the encapsulation of L-DOPA into polymeric- and lipid-based nanoparticles (NPs). These formulations can protect L-DOPA from systemic decarboxylation into DA and improve L-DOPA delivery to the central nervous system. Additionally, NPs can be modified with proteins, peptides and antibodies specifically targeting the blood-brain barrier (BBB), thereby reducing required dosages and free systemic DA. Alternative delivery approaches for NP-encapsulated L-DOPA include intravenous (IV) administration, transdermal delivery using adhesive patches and direct intranasal administration, facilitating increased therapeutic DA concentrations in the brain. This review provides an overview of the recent advances for NP-mediated L-DOPA delivery to the brain, and debates challenges and future perspectives on the field.

Structure of polymeric nanoparticles encapsulating a drug - pamoic acid ion pair by scanning transmission electron microscopy

Drug-delivery systems based on polymeric nanoparticles are useful for improving drug bioavailability and/or delivery of the active ingredient for example directly to the cancerous tumour. The physical and chemical characterization of a functionalized nanoparticle system is required to measure drug loading and dispersion but also to understand and model the rate and extent of drug release to help predict performance. Many techniques can be used, however, difficulties related to structure determination and identifying the precise location of the drug fraction make mathematical prediction complex and in many published examples the final conclusions are based on assumptions regarding an expected structure. Cryogenic scanning transmission electron microscopy imaging in combination with electron energy loss spectroscopy techniques are used here to address this issue and provide a multi-modal approach to the characterisation of a self-assembled polymeric nanoparticle system based upon a polylactic acid - polyethylene glycol (PLA-PEG) block copolymer containing a hydrophobic ion-pair between pamoic acid and an active pharmaceutical ingredient (API). Results indicate a regular dispersion of spherical nanoparticles of 88 ± 9 nm diameter. The particles are shown to have a multi-layer structure consisting of a 25 nm radius hydrophobic core of PLA and pamoic acid-API material with additional enrichment of the pamoic acid-API material within the inner core (that can be off-centre), surrounded by a 9 nm dense PLA-PEG layer all with a low-density PEG surface coating of around 10 nm thickness. This structure suggests that release of the API can only occur by diffusion through or degradation of the dense, 9 nm thick PLA-PEG layer either of which is a process consistent with the previously reported steady release kinetics of the API and counter ion from these nanoparticle formulations. Establishing accurate measures of product structure enables a link to performance by providing appropriate physical parameters for future mathematical modelling of barriers controlling API release in these nanoparticle formulations.

Phosphatase-degradable nanoparticles: A game-changing approach for the delivery of antifungal proteins

HYPOTHESIS

Polyphosphate nanoparticles as phosphatase-degradable carriers for Penicillium chrysogenum antifungal protein (PAF) can enhance the antifungal activity of the protein against Candida albicans biofilm.

EXPERIMENTS

PAF-polyphosphate (PP) nanoparticles (PAF-PP NPs) were obtained through ionic gelation. The resulting NPs were characterized in terms of their particle size, size distribution and zeta potential. Cell viability and hemolysis studies were carried out in vitro on human foreskin fibroblasts (Hs 68 cells) and human erythrocytes, respectively. Enzymatic degradation of NPs was investigated by monitoring release of free monophosphates in the presence of isolated as well as C. albicans-derived phosphatases. In parallel, shift in zeta potential of PAF-PP NPs as a response to phosphatase stimuli was determined. Diffusion of PAF and PAF-PP NPs through C. albicans biofilm matrix was analysed by fluorescence correlation spectroscopy (FCS). Antifungal synergy was evaluated on C. albicans biofilm by determining the colony forming units (CFU).

FINDINGS

PAF-PP NPs were obtained with a mean size of 300.9 ± 4.6 nm and a zeta potential of -11.2 ± 2.8 mV. In vitro toxicity assessments revealed that PAF-PP NPs were highly tolerable by Hs 68 cells and human erythrocytes similar to PAF. Within 24 h, 21.9 ± 0.4 μM of monophosphate was released upon incubation of PAF-PP NPs having final PAF concentration of 156 μg/ml with isolated phosphatase (2 U/ml) leading to a shift in zeta potential up to -0.7 ± 0.3 mV. This monophosphate release from PAF-PP NPs was also observed in the presence of C. albicans-derived extracellular phosphatases. The diffusivity of PAF-PP NPs within 48 h old C. albicans biofilm matrix was similar to that of PAF. PAF-PP NPs enhanced antifungal activity of PAF against C. albicans biofilm decreasing the survival of the pathogen up to 7-fold in comparison to naked PAF. In conclusion, phosphatase-degradable PAF-PP NPs hold promise as nanocarriers to augment the antifungal activity of PAF and enable its efficient delivery to C. albicans cells for the potential treatment of Candida infections.

Evaluation of photodynamic therapy on nanoparticles and films loaded-nanoparticles based on chitosan/alginate for curcumin delivery in oral biofilms

Nanoparticles and nanoparticle-loaded films based on chitosan/sodium alginate with curcumin (CUR) are promising strategies to improve the efficacy of antimicrobial photodynamic therapy (aPDT) for the treatment of oral biofilms. This work aimed to develop and evaluate the nanoparticles based on chitosan and sodium alginate encapsulated with CUR dispersed in polymeric films associated with aPDT in oral biofilms. The NPs were obtained by polyelectrolytic complexation, and the films were prepared by solvent evaporation. The photodynamic effect was evaluated by counting Colony Forming Units (CFU/mL). Both systems showed adequate characterization parameters for CUR release. Nanoparticles controlled the release of CUR for a longer period than the nanoparticle-loaded films in simulated saliva media. Control and CUR-loaded nanoparticles showed a significant reduction of 3 log10 CFU/mL against S. mutans biofilms, compared to treatment without light. However, biofilms of S. mutans showed no photoinactivation effect using films loaded with nanoparticles even in the presence of light. These results demonstrate the potential of chitosan/sodium alginate nanoparticles associated with aPDT as carriers for the oral delivery of CUR, offering new possibilities to improve the treatment of dental caries and infections. This work will contribute to advances in the search for innovative delivery systems in dentistry.

Controlling Molecular Dye Encapsulation in the Hydrophobic Core of Core-Shell Nanoparticles for In Vivo Imaging

Polymeric nanoparticles with a hydrophobic core are valuable biomedical materials with potential applications in in vivo imaging and drug delivery. These materials are effective at protecting vulnerable molecules, enabling them to serve their functions in hydrophilic physiological environments; however, strategies that allow the chemical composition and molecular weight of polymers to be tuned, forming nanoparticles to control the functional molecules, are lacking. In this article, we review strategies for designing core-shell nanoparticles that enable the effective and stable encapsulation of functional molecules for biomedical applications. IR-1061, which changes its optical properties in response to the microenvironment are useful for in vitro screening of the in vivo stability of polymeric nanoparticles. An in vitro screening test can be performed by dispersing IR-1061-encapsulated polymer nanoparticles in water, saline, buffer solution, aqueous protein solution, etc., and measuring the absorption spectral changes. Through the screening, the effects of the polarity, molecular weight, and the chiral structure of polymers consisting of polymer nanoparticles on their stability have been revealed. Based on the findings presented here, more methodologies for the effective application of various biomolecules and macromolecules with complex high-dimensional structures are expected to be developed.

Colistin-loaded aerosolizable particles for the treatment of bacterial respiratory infections

Compared to parenteral administration of colistin, its direct pulmonary administration can maximize lung drug deposition while reducing systemic adverse side effects and derived nephrotoxicity. Current pulmonary administration of colistin is carried out by the aerosolization of a prodrug, colistin methanesulfonate (CMS), which must be hydrolized to colistin in the lung to produce its bactericidal effect. However, this conversion is slow relative to the rate of absorption of CMS, and thus only 1.4 % (w/w) of the CMS dose is converted to colistin in the lungs of patients receiving inhaled CMS. We synthesized several aerosolizable nanoparticle carriers loaded with colistin using different techniques and selected particles with sufficient drug loading and adequate aerodynamic behavior to efficiently deliver colistin to the entire lung. Specifically, we carried out (i) the encapsulation of colistin by single emulsion-solvent evaporation with immiscible solvents using polylactic-co-glycolic (PLGA) nanoparticles; (ii) its encapsulation using nanoprecipitation with miscible solvents using poly(lactide-co-glycolide)-block-poly(ethylene glycol) as encapsulating matrix; (iii) colistin nanoprecipitation using the antisolvent precipitation method and its subsequent encapsulation within PLGA nanoparticles; and (iv) colistin encapsulation within PLGA-based microparticles using electrospraying. Nanoprecipitation of pure colistin using antisolvent precipitation showed the highest drug loading (55.0 ± 4.8 wt%) and spontaneously formed aggregates with adequate aerodynamic diameter (between 3 and 5 μm) to potentially reach the entire lung. These nanoparticles were able to completely eradicate Pseudomonas aeruginosa in an in vitro lung biofilm model at 10 µg/mL (MBC). This formulation could be a promising alternative for the treatment of pulmonary infections improving lung deposition and, therefore, the efficacy of aerosolized antibiotics.

Novel csuC-DNA nanovaccine based on chitosan candidate vaccine against infection with Acinetobacter baumannii

BACKGROUND

Generating vaccines is a promising and effective method for stopping the spread of Acinetobacter baumannii (A. baumannii) infections that are becoming more and more drug-resistant (MDR). Developing a DNA vaccine and testing its efficacy and protective effects in BALB/c mice were the goals of this research.

METHODS

We examined the genomes of 35 different strains of A. baumannii using the Vaxign online program, and we selected outer membrane and secreted proteins as potential vaccine candidates. Next, the proteins' immunogenicity, antigenic features, physical and chemical characteristics, and B and MHCI/II cell epitope concentrations were assessed. The DNA vaccine was synthesized. Then, to generate CS-DNA nanoparticles, the DNA vaccine was e encapsulated by chitosan (CS) nanoparticles (NPs). BALB/c mice were used to assess the vaccine's immunogenicity and immunoprotective effectiveness.

RESULTS

CS-DNA NPs were nontoxic, positively charged (4.39 mV), and small (mean size of 285-350 nm) with ostensibly spherical shapes. It was possible to establish a continuously slow release profile and a high entrapment efficiency (78.12 %). CS-DNA vaccinated BALB/c mice elicited greater levels of csuC-specific IgG in plasma and IFN-γ in splenocyte lysate compared with non-encapsulated DNA vaccine. In addition, BALB/c mice immunized with CS-DNA nanovaccine showed decreased lung damage and bacterial loads in the lung and blood, as well as significant immunity (87.5 %) versus acute fatal intratracheal A. baumannii challenge.

CONCLUSION

In conclusion, acute fatal intratracheal A. baumannii exposure was prevented by CS-DNA NPs that induced specific IgG antibodies, Th1 cellular immunity, and other protective mechanisms. Our findings show that this nanovaccine is a promising contender for stopping the spread of A. baumannii infection.

Design and biological evaluation of Repaglinide loaded polymeric nanocarriers for diabetes linked neurodegenerative disorder: QbD-driven optimization, in situ, in vitro and in vivo investigation

Diabetes mellitus is a metabolic disorder characterized by inadequate insulin secretion and signaling dysfunction, leading to a vast spectrum of systemic complications. These complications trigger cascades of events that result in amyloid-beta plaque formation and lead to neurodegenerative disorders such as Alzheimer's. Repaglinide (REP) an insulinotropic agent, suppresses the down regulatory element antagonist modulator (DREAM) and enhances the ATF6 expression to provide neuroprotection following the DREAM/ATF6/apoptotic pathway. However, oral administration of REP for brain delivery becomes more complicated due to its physicochemical characteristics (high protein binding (>98%), low permeability, short half-life (∼1 h), low bioavailability). Therefore, to circumvent these problems, we develop a polymeric nanocarrier system (PNPs) by in-house synthesized di-block copolymer (PEG-PCL). PNPs were optimized using quality by design approach response surface methodology and characterized by particle size (112.53 ± 5.91 nm), PDI (0.157 ± 0.08), and zeta potential (-6.20 ± 0.82 mV). In vitro release study revealed that PNPs (∼70% in 48 h) followed the Korsmeyer-Peppas model with a Fickian diffusion release pattern, and in intestinal absorption assay PNPs showed increment of ∼1.3 folds compared of REP. Moreover, cellular studies confirmed that REP-loaded PNPs significantly enhance the cellular viability, uptake and reduce the peroxide-induced stress in neuroblastoma SHSY-5Y cells. Further, pharmacokinetic parameters of PNPs showed an increment in t_max (2.46-fold), and C_max (1.25-fold) associated with REP. In the brain biodistribution study, REP loaded PNPs was sustained for 24 h whereas free REP sustained only for12 h. In DM induced neurodegenerative murine model, a significantly (p < 0.01) enhanced pharmacodynamic was observed in PNP treated group by estimating biochemical and behavioral parameters. Hence, oral administration of REP-loaded PNPs promotes efficient brain uptake and improved efficacy of REP in the diseased model.

Novel adjuvant nano-vaccine induced immune response against Acinetobacter baumannii

Developing adjuvant vaccines to combat rising multidrug-resistant (MDR) Acinetobacter baumannii (A. baumannii) infections is a promising and cost-effective approach. The aim of this analysis was to construct a pDNA-CPG C274-adjuvant nano-vaccine and investigate its immunogenicity and protection in BALB/c mice. The CPG ODN C274 adjuvant was chemically synthesized and cloned into pcDNA3.1( +), and the cloning was verified using PCR and BamHI/EcoRV restriction enzyme digestion. Then, utilizing a complex coacervation approach, pDNA-CPG C274 was encapsulated by chitosan (CS) nanoparticles (NPs). TEM and DLS are used to explore the properties of the pDNA/CSNP complex. TLR-9 pathway activation was investigated in human HEK-293 and RAW 264.7 mouse cells. The vaccine's immunogenicity and immune-protective effectiveness were investigated in BALB/c mice. The pDNA-CPG C274/CSNPs were small (mean size 79.21 ± 0.23 nm), positively charged (+ 38.87 mV), and appeared to be spherical. A continuous slow release pattern was achieved. TLR-9 activation was greatest in the mouse model with CpG ODN (C274) at concentrations of 5 and 10 μg/ml with 56% and 55%, respectively (**P < 0.01). However, in HEK-293 human cells, by increasing the concentration of CpG ODN (C274) from 1 to 50 μg/ml, the activation rate of TLR-9 also increased, so that the highest activation rate (81%) was obtained at the concentration of 50 μg/ml (***P < 0.001). pDNA-CPG C274/CSNPs immunized BALB/c mice produced increased amounts of total-IgG, as well as IFN-γ and IL-1B in serum samples, compared to non-encapsulated pDNA-CPG C274. Furthermore, liver and lung injuries, as well as bacterial loads in the liver, lung, and blood, were reduced, and BALB/c mice immunized with pDNA-CPG C274/CSNPs showed potent protection (50-75%) against acute fatal Intraperitoneal A. baumannii challenge. pDNA-CPG C274/CSNPs evoked total-IgG antibodies, Th1 cellular immunity, and the TLR-9 pathway, as well as protection against an acute fatal A. baumannii challenge. Our findings suggest that this nano-vaccine is a promising approach for avoiding A. baumannii infection when used as a powerful adjuvant.

pH-responsive phthalate cashew gum nanoparticles for improving drugs delivery and anti-Trypanosoma cruzi efficacy

Nanotechnology is a crucial technology in recent years has resulted in new and creative applications of nanomedicine. Polymeric nanoparticles have increasing demands in pharmaceutical applications and require high reproducibility, homogeneity, and control over their properties. Work explores the use of cashew phthalate gum (PCG) as a particle-forming polymer. PCG exhibited a pH-sensitive behavior due to the of acid groups on its chains, and control drug release. We report the development of nanoparticles carrying benznidazole. Formulations were characterized by DLS, encapsulation efficiency, drug loading, FTIR, pH-responsive behavior, release, and in vitro kinetics. Interaction between polymer and drug was an evaluated by molecular dynamics. Morphology was observed by SEM, and in vitro cytotoxicity by MTT assay. Trypanocidal effect for epimastigote and trypomastigote forms was also evaluated. NPs responded to the slightly basic pH, triggering the release of BNZ. In acidic medium, they presented small size, spherical shape, and good stability. It was indicated NP with enhanced biological activity, reduced cytotoxicity, high anti T. cruzi performance, and pH-sensitive release. This work investigated properties related to the development and enhancement of nanoparticles. PCG has specific physicochemical properties that make it a promising alternative to drug delivery, however, there are still challenges to be overcome.

Evaluation of paclitaxel-loaded polymeric nanoparticles in 3D tumor model: impact of tumor stroma on penetration and efficacy

Since tumor stroma poses as a barrier to achieve efficacy of nanomedicines, it is essential to evaluate nano-chemotherapeutics in stroma-mimicking 3D models that reliably predict their behavior regarding these hurdles limiting efficacy. In this study, we evaluated the effect of paclitaxel-loaded polymeric micelles (PTX-PMCs) and polymeric nanoparticles (PTX-PNPs) in a tumor stroma-mimicking 3D in vitro model. PTX-PMCs (77 nm) based on a amphiphilic block copolymer of mPEG-b-p(HPMAm-Bz) and PTX-PNPs (159 nm) based on poly(lactic-co-glycolic acid) were prepared, which had an encapsulation efficiency (EE%) of 81 ± 15% and 45 ± 8%, respectively. 3D homospheroids of mouse 4T1 breast cancer cells and heterospheroids of NIH3T3 fibroblasts and 4T1 (5:1 ratio) were prepared and characterized with high content two-photon microscopy and immunostaining. Data showed an induction of epithelial-mesenchymal transition (α-SMA) in both homo- and heterospheroids, while ECM (collagen) deposition only in heterospheroids. Two-photon imaging revealed that both fluorescently labeled PMCs and PNPs penetrated into the core of homospheroids and only PMCs penetrated into heterospheroids. Furthermore, PTX-PMCs, PTX-PNPs, and free PTX induced cytotoxicity in tumor cells and fibroblasts grown as monolayer, but these effects were substantially reduced in 3D models, in particular in heterospheroids. Gene expression analysis showed that heterospheroids had a significant increase of drug resistance markers (Bcl2, Abgc2) compared to 2D or 3D monocultures. Altogether, this study shows that the efficacy of nanotherapeutics is challenged by stroma-induced poor penetration and development of resistant phenotype. Therefore, this tumor stroma-mimicking 3D model can provide an excellent platform to study penetration and effects of nanotherapeutics before in vivo studies.

Non-covalent strategies to functionalize polymeric nanoparticles with NGR peptides for targeting breast cancer

Surface functionalization of nanoparticles (NPs) with tumor-targeting peptides is an emerging approach with a huge potential to translate in the clinic and ameliorate the efficacy of nano-oncologicals. One major challenge is to find straightforward strategies for anchoring peptides on the surface of biodegradable NPs and ensuring their correct exposure and orientation to bind the target receptor. Here, we propose a non-covalent strategy to functionalize polyester aminic NPs based on the formation of either electrostatic or lipophilic interactions between NPs and the peptide modified with an anchoring moiety. We selected an iNGRt peptide containing a CendR motif (CRNGR) targeting neuropilin receptor 1 (NRP-1), which is upregulated in several cancers. iNGRt was linked with either a short poly(glutamic acid) chain (polyE) or a palmitoyl chain (Palm) and used to functionalize the surface of NPs made of a diamine poly(ε-caprolactone). iNGRt-PolyE was adsorbed on preformed cationic NPs through electrostatic interaction, whereas iNGRt-Palm was integrated into the forming NPs through interactions. In both cases, peptides were strongly associated with NPs of ∼100 nm, low polydispersity indexes, and positive zeta potential values. NPs entered MDA-MB231 breast cancer cells overexpressing NRP-1 via receptor-mediated endocytosis and showed a different cell localization depending on the mode of peptide anchoring. When loaded with the lipophilic anticancer drug docetaxel (DTX), NPs functionalized with the iNGRt-Palm variant exerted a time- and dose-dependent cytotoxicity similar to DTX in MDA-MB-231 cells but were less toxic than DTX toward control MRC-5 human fibroblasts, not expressing NRP-1. In a heterotopic mouse model of triple negative breast cancer, iNGRt-Palm NPs were tolerated better than free DTX and demonstrated superior anticancer activity and survival compared to both free DTX and NPs without peptide functionalization. We foresee that the functionalization strategy with palmitoylated peptides proposed here can be extended to other biodegradable NPs and peptide sequences designed for therapeutic or targeting purposes.

Improving antimicrobial activity against endodontic biofilm after exposure to blue light-activated novel curcumin nanoparticle

New therapies involving natural products and nanobiotechnology open additional perspectives to reduce endodontic infections. Curcumin is a natural polyphenol extracted from the dry rhizome of curcuma long Linn with therapeutic properties for application in nanobiotechnology and as a photosensitizer for photodynamic therapy. This study aimed to synthesize a novel polymeric nanoparticle of poly (lactic-co-glycolic acid) (PLGA) loaded with curcumin (NP+Cur), and evaluate its antimicrobial activity against endodontic biofilms. Additionally, its biocompatibility using oral keratinocytes was assessed. The polymeric NP+Cur was prepared by the nanoprecipitation method. Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were calculated for the three endodontic bacteria (Enterococcus faecalis, Streptococcus oralis and Actinomyces viscosus). Antibacterial activity of NP+Cur against single- and multispecies biofilm pre-formed on the botton 24-well plate and into dentin tubules of bovine teeth were evaluated by colony forming units and confocal laser scanning microscopy. The pre-irradiation time was 5 min followed by exposure to blue light-emitting diode at 450 nm for the photodynamic treatment. Cell viability using oral keratinocytes was assessed by Alamar Blue assay. MIC and MBC showed antibacterial activity of NP+Cur against endodontic bacteria. A treatment of pre-formed biofilms of endodontic bacteria with NP+Cur also significantly decreased bacterial viability. The concentration of 325 μg/mL of photoactivated NP+Cur was the one that most reduced the viability of the endodontic bacteria evaluated. Regarding biocompatibility, NP+Cur 325 μg/mL and pure nanoparticles showed a cell viability greater than 80%. The novel polymeric nanoparticles loaded with curcumin may be a promising adjunct use to treatment of endodontic infections.

Polycaprolactone-based nanocarriers containing 5-fluorouracil as a therapeutic guided drug delivery approach for enhancing anticancer activity

Nowadays, nano-platforms designed for drug delivery systems (DDSs) such as polymers, liposomes, and micelles have been demonstrated to be clinically efficient. The sustained drug release is one of the advantages of DDSs, especially polymer-based nanoparticles. The formulation could enhance the drug's durability, in which the biodegradable polymers are the most interesting building blocks of DDSs. Nano-carriers could circumvent many issues by localized drug delivery and release via certain internalization routes such as intracellular endocytosis paths and increasing biocompatibility. Polymeric nanoparticles and their nanocomposite are one of the most important classes of materials that can be used for the assembly of nanocarriers that can form complex, conjugated and encapsulated forms. The site-specific drug delivery may arise from the ability of nanocarriers to pass through the biological barrier, their specific interactions with receptors, and passive targeting. The better circulation, uptake, and stability along with targeting attributes lead to lesser side effects and damage to normal cells. Hence, in this review, the most recent achievements on polycaprolactone-based or -modified nanoparticles in drug delivery systems (DDSs) for 5-fluorouracil (5-FU) are presented.

High drug loading nanosized amorphous solid dispersion (NASD) with enhanced in vitro solubility and permeability: Benchmarking conventional ASD

Through liquid-liquid phase separation (LLPS), it is possible to generate drug-rich nanoparticles during the dissolution of conventional amorphous solid dispersions (ASDs). These self-generated nanoparticles may improve the oral absorption of poorly water-soluble drugs by enhancing the drug's apparent solubility and effective membrane permeability. However, due to the high concentration threshold required for LLPS, conventional ASDs that can consistently generate drug-rich nanoparticles during dissolution are rare. More importantly, the quality of these meta-stable drug-rich nanoparticles is hard to control during dissolution, leading to inconsistency in formulation performances. This work has described a continuous twin-screw extrusion process capable of producing nanosized ASD (NASD) formulations that can offer better solubility and permeability enhancements over conventional ASD formulations. Two polymeric carriers, polyvinylpyrrolidone-co-vinyl acetate (PVPVA) and hydroxypropyl methylcellulose acetate succinate (HPMCAS), with a model hydrophobic drug celecoxib (BCS II), were formulated into both ASD and NASD formulations. Compared to the conventional ASD formulation, the prefabricated NASD (sizes ranging between 40 and 200 nm) embedded within a polyol matrix can be rapidly dispersed into a nanoparticle suspension in the presence of aqueous media. The resulting NASDs achieved drug loadings up to 80 % w/w and a maximum of 98 % encapsulation efficiency. Because of the TSE platform's high drug-loading capacity and high scalability, the developed method may be useful for continuously producing personalized nanomedicines.

Novel formulation for co-delivery of cinnamon- and cumin-loaded polymeric nanoparticles to enhance their oral bioavailability

Nanobiotechnology has been an encouraging approach to improving the efficacy of hydrophobic bioactive compounds. The biologically active constituents present in herbal extracts are poorly absorbed, resulting in loss of bioavailability and efficacy. Hence, herbal medicine and nanotechnology are combined to overcome these limitations. The surface-to-volume ratio of nanoparticles is high and as the size is small, the functional properties are enhanced. The present study reports the synthesis of cinnamon and cumin (Ci-Cu) dual drug-loaded poly (D, L-lactide-co-glycolide) (PLGA) nanoparticles (NPs) to overcome the limitations of oral bioavailability and extend the effect of these drugs for alleviating health problems. The solvent evaporation method was adopted for the synthesis, and the as-prepared nanoparticles were characterized by Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, Transmission electron microscopy (TEM) and X-ray diffraction (XRD). The average size of the formed spherical Ci-Cu nanoparticles ranged between 90 and 120 nm. The encapsulation efficiency of the drug was found to be 79% ± 4.5%. XRD analysis demonstrated that cinnamon and cumin were amorphously scattered in the PLGA matrix. The FTIR bands showed no evident changes suggesting the no direct molecular interactions between the drug and the polymer. At pH 6.9, the release studies in vitro exhibited a burst initially followed by a tendency to obtain a slower steady release. The results indicated that the Cu-Ci dual drug-loaded polymeric NPs has drug release at a slower rate. The time taken for 25% release of drug in Ci-Cu-loaded PLGA NPs was twice as compared to cumin-loaded PLGA Nps, and three times compared to cinnamon-loaded PLGA NPs.

Effect of surface functionalization and loading on the mechanical properties of soft polymeric nanoparticles prepared by nano-emulsion templating

Drug and gene delivery systems based on polymeric nanoparticles offer a greater efficacy and a reduced toxicity compared to traditional formulations. Recent studies have evidenced that their internalization, biodistribution and efficacy can be affected, among other factors, by their mechanical properties. Here, we analyze by means of Atomic Force Microscopy force spectroscopy how composition, surface functionalization and loading affect the mechanics of nanoparticles. For this purpose, nanoparticles made of Poly(lactic-co-glycolic) (PLGA) and Ethyl cellulose (EC) with different functionalizations and loading were prepared by nano-emulsion templating using the Phase Inversion Composition method (PIC) to form the nano-emulsions. A multiparametric nanomechanical study involving the determination of the Young's modulus, maximum deformation and breakthrough force was carried out. The obtained results showed that composition, surface functionalization and loading affect the nanomechanical properties in a different way, thus requiring, in general, to consider the overall mechanical properties after the addition of a functionalization or loading. A graphical representation method has been proposed enabling to easily identify mechanically equivalent formulations, which is expected to be useful in the development of soft polymeric nanoparticles for pre-clinical and clinical use.

Nanosystems for gene therapy targeting brain damage caused by viral infections

Several human pathogens can cause long-lasting neurological damage. Despite the increasing clinical knowledge about these conditions, most still lack efficient therapeutic interventions. Gene therapy (GT) approaches comprise strategies to modify or adjust the expression or function of a gene, thus providing therapy for human diseases. Since recombinant nucleic acids used in GT have physicochemical limitations and can fail to reach the desired tissue, viral and non-viral vectors are applied to mediate gene delivery. Although viral vectors are associated to high levels of transfection, non-viral vectors are safer and have been further explored. Different types of nanosystems consisting of lipids, polymeric and inorganic materials are applied as non-viral vectors. In this review, we discuss potential targets for GT intervention in order to prevent neurological damage associated to infectious diseases as well as the role of nanosized non-viral vectors as agents to help the selective delivery of these gene-modifying molecules. Application of non-viral vectors for delivery of GT effectors comprise a promising alternative to treat brain inflammation induced by viral infections.

Asiaticoside polymeric nanoparticles for effective diabetic wound healing through increased collagen biosynthesis: In-vitro and in-vivo evaluation

Asiaticoside (AST) is a naturally available phytoconstituent that enables effective wound healing mainly by promoting collagen biosynthesis. However, the physicochemical nature of AST such as high molecular weight (959.12 g/mol), poor water solubility and poor permeability limits its therapeutic effects. This study aims to develop Asiaticoside polymeric nanoparticles (AST PNP) embedded in a gelatin based biodegradable hydrogel (15 % w/v) for application in the wound cavity to enable sustained release of AST and enhance its therapeutic effects. The AST PNP were fabricated in the desired size range (168.4 nm; PDI (0.09)) and the morphology, rate of fluid uptake, rate of water loss, and water vapor transmission rate of AST PNP incorporated hydrogel were determined. AST PNP gel showed porous structural morphology and possessed ideal characteristics as a graft for wound healing. The drug release kinetics and cellular uptake of AST PNP were investigated wherein, AST PNP demonstrated sustained release profile upto 24 h in comparison to free AST (complete release within 6 h) and exhibited an enhanced intra-cellular uptake in fibroblasts within 3 h compared to the free drug. In-vitrocell culture studies also demonstrated significant proliferation and migration of fibroblasts in the presence of AST PNP. Additionally, AST PNP gel upon application to the wounds of diabetic rats depicted improved wound healing efficacy in terms of improved collagen biosynthesis, upregulated COL-1 protein level (∼1.85 fold vs free AST), and enhanced expression of α-SMA compared to control groups. Altogether, formulation of AST as polymeric nanoparticles in a gel based carrier offered significant improvement in the therapeutic properties of AST for the management of diabetic wounds.