Optimizing the intermediates adsorbability and revealing the dynamic reconstruction of Co6Fe3S8 solid solution for bifunctional water splitting

Co9S8 has been extensively studied as a promising catalyst for water electrolysis. Doping Co9S8 with Fe improves its oxygen evolution reaction (OER) performance by regulating the catalyst self-reconfigurability and enhancing the absorption capacity of OER intermediates. However, the poor alkaline hydrogen evolution reaction (HER) properties of Co9S8 limit its application in bifunctional water splitting. Herein, we combined Fe doping and sulfur vacancy engineering to synergistically enhance the bifunctional water-splitting performance of Co9S8. The as-synthesized Co6Fe3S8 catalyst exhibited excellent OER and HER characteristics with low overpotentials of 250 and 84 mV, respectively. It also resulted in the low Tafel slopes of 135 mV dec-1 for the OER and 114 mV dec-1 for the HER. A two-electrode electrolytic cell with Co6Fe3S8 used as both the cathode and anode produced a current density of 10 mA cm-2 at a low voltage of only 1.48 V, maintaining high stability for 100 h. The results of in/ex-situ experiments indicated that the OER process induced electrochemical reconfiguration, forming CoOOH/FeOOH active species on the catalyst surface to enhance its OER performance. Density functional theory (DFT) simulations revealed that Fe doping and the presence of unsaturated coordination metal sites in Co6Fe3S8 promoted H2O and H* adsorption for the HER. The findings of this study can help develop a strategy for designing highly efficient bifunctional water splitting electrocatalysts.

Enhanced HER Efficiency of Monolayer MoS2 via S Vacancies and Nano-Cones Array Induced Strain Engineering

Molybdenum disulfide (MoS2 ) has gained significant attention as a promising catalyst for hydrogen evolution reaction (HER). The catalytic performance of MoS2 can be enhanced by either altering its structure or regulating external conditions. In this study, a novel approach combining the introduction of sulfur vacancy (VS ) and biaxial tensile strain to create more active sites and modulate the band structure of monolayer MoS2 is proposed. To achieve the desired strain level, nano-cones (NCs) array substrates facilely fabricated by dip-pen nanolithography (DPN) are employed. The magnitude of the applied tensile strain can be finely tuned via adjusting the height of the NCs. Furthermore, on-chip electrochemical devices are constructed based on artificial structures, enabling precise optimization of HER performance of MoS2 through the synergistic effect of VS and strain. Combined with the d-band theory, it reveals that the HER properties of VS -MoS2 are highly dependent on the degree of tensile strain. This study presents a promising avenue for the design and preparation of high-performance 2D catalysts for energy conversion and storage applications.

Electronic configuration inversion in CdIn2S4 for efficient photocatalytic hydrogen peroxide generation coupled with selective benzylamine oxidation

Vacancies engineering has sparked a huge interest in enhancing photocatalytic activity, but monovacancy simultaneously conducts as either electron or hole acceptor and redox reaction, worsening charge transfer and catalytic performance. Here, the concept of electronic inversion has been proposed through the simultaneous introduction of surface oxygen and S vacancies in CdIn2S4 (OSv-CIS). Consequently, under mild conditions, the well-designed OSv-CIS-200 demonstrated a strong rate of N-benzylidenebenzylamine production (2972.07 µmol g-1 h-1) coupled with Hydrogen peroxide (H2O2) synthesis (2362.33 µmol g-1 h-1) (PIH), which is 12.4 times higher than that of CdIn2S4. Density functional theory (DFT) simulation and characterization studies demonstrate that oxygen is introduced into the lattice on the surface of the material, reversing the charge distribution of the S vacancy and enhancing the polarity of the total charge distribution. It not only provides a huge built-in electric field (BEF) for guiding the orientation of the charge transfer, but also acts as a long-distance active site to accelerate reaction and prevent H2O2 decomposition. Our work offers a straightforward connection between the atomic defect and intrinsic properties for designing high-efficiency materials.

Photocatalytic Cascade Reaction Driven by Directed Charge Transfer over VS -Zn0.5 Cd0.5 S/GO for Controllable Benzyl Oxidation

Photocatalysis is an important technique for synthetic transformations. However, little attention has been paid to light-driven synergistic redox reactions for directed synthesis. Herein, the authors report tunable oxidation of benzyl to phenylcarbinol with the modest yield (47%) in 5 h via singlet oxygen (¹ O₂ ) and proton-coupled electron transfer (PCET) over the photocatalyst Zn_0.5 Cd_0.5 S (ZCS)/graphene oxide (GO) under exceptionally mild conditions. Theoretical calculations indicate that the presence of S vacancies on the surface of ZCS/GO photocatalyst is crucial for the adsorption and activation of O₂ , successively generating the superoxide radical (^• O₂ ^- ) and ¹ O₂ , attributing to the regulation of local electron density on the surface of ZCS/GO and photogenerated holes (h⁺ ). Meanwhile, accelerated transfer of photogenerated electrons (e^- ) to GO caused by the π-π stacking effect is conducive to the subsequent aldehyde hydrogenation to benzyl alcohol rather than non-selective oxidation of aldehyde to carboxylic acid. Anisotropic charge transport driven by the built-in electric field can further promote the separation of e^- and h⁺ for multistep reactions. Promisingly, one-pot photocatalytic conversion of p-xylene to 4-methylbenzyl alcohol is beneficial for reducing the harmful effects of aromatics on human health. Furthermore, this study provides novel insights into the design of photocatalysts for cascade reactions.

"Nano Killers" Activation by permonosulfate enables efficient anaerobic microorganisms disinfection

The development of effective nanomaterials for killing anaerobic bacteria is essential for human health and economic development. Here, we propose a new bactericidal mechanism where theoretical calculations are in good agreement with experimental results. The "poison arrow-head" of MoS₂ nanosheets enables the vigorous extraction of lipids from the cell membrane. Based on density functional calculations, oxidation active species (OAS) are generated due to the strong adsorption energy between S vacancies in MoS₂ and chemical substrates (permonosulfate (PMS) and H₂O). These OAS can be visualized as numerous moving "nano killers", constantly oxidizing the lipids around MoS₂; thereby, re-releasing the surface of the sharp knife. The process of physical extraction collaborated with chemical oxidation not only precisely positions the cell membrane but also allows for continuous sterilization. This work digs into the mechanism of anaerobic bacterial sterilization, which sheds significant light on biological analysis, antibacterial, cancer therapy, and anti microbiologically influenced corrosion.

Sulfur Vacancy and Ti3 C2 Tx Cocatalyst Synergistically Boosting Interfacial Charge Transfer in 2D/2D Ti3 C2 Tx /ZnIn2 S4 Heterostructure for Enhanced Photocatalytic Hydrogen Evolution

Constructing an efficient photoelectron transfer channel to promote the charge carrier separation is a great challenge for enhancing photocatalytic hydrogen evolution from water. In this work, an ultrathin 2D/2D Ti3 C2 Tx /ZnIn2 S4 heterostructure is rationally designed by coupling the ultrathin ZnIn2 S4 with few-layered Ti3 C2 Tx via the electrostatic self-assembly strategy. The 2D/2D Ti3 C2 Tx /ZnIn2 S4 heterostructure possesses larger contact area and strong electronic interaction to promote the charge carrier transfer at the interface, and the sulfur vacancy on the ZnIn2 S4 acting as the electron trap further enhances the separation of the photoinduced electrons and holes. As a consequence, the optimal 2D/2D Ti3 C2 Tx /ZnIn2 S4 composite exhibits a high photocatalytic hydrogen evolution rate of 148.4 µmol h-1 , which is 3.6 times and 9.2 times higher than that of ZnIn2 S4 nanosheet and flower-like ZnIn2 S4 , respectively. Moreover, the stability of the ZnIn2 S4 is significantly improved after coupling with the few-layered Ti3 C2 Tx . The characterizations and density functional theory calculation demonstrate that the synergistic effect of the sulfur vacancy and Ti3 C2 Tx cocatalyst can greatly promote the electrons transfer from ZnIn2 S4 to Ti3 C2 Tx and the separation of photogenerated charge carriers, thus enhancing the photocatalytic hydrogen evolution from water.

A Combined Ordered Macro-Mesoporous Architecture Design and Surface Engineering Strategy for High-Performance Sulfur Immobilizer in Lithium-Sulfur Batteries

The practical application of lithium-sulfur (Li-S) batteries is hindered by the "shuttle" of lithium polysulfides (LiPS) and sluggish Li-S kinetics issues. Herein, a synergistic strategy combining mesoporous architecture design and defect engineering is proposed to synthesize multifunctional defective 3D ordered mesoporous cobalt sulfide (3DOM N-Co₉ S_{8- x} ) to address the shuttling and sluggish reaction kinetics of polysulfide in Li-S batteries. The unique 3DOM design provides abundant voids for sulfur storage and enlarged active interfaces that reduce electron/ion diffusion pathways. Meanwhile, X-ray absorption spectroscopy shows that the surface defect engineering tunes the CoS₄ tetrahedra to CoS₆ octahedra on Co₉ S₈ , endowing abundance of S vacancies on the Co₉ S₈ octahedral sites. The ever-increasing S vacancies over the course of electrochemical process further promotes the chemical trapping of LiPS and its conversion kinetics, rendering fast and durable Li-S chemistry. Benefiting from these features, the as-developed 3DOM N-Co₉ S_{8- x} /S cathode delivers high areal capacity, superb rate capability, and excellent cyclic stability with ultralow capacity fading rate under raised sulfur loading and low electrolyte content. This design strategy promotes the development of practically viable Li-S batteries and sheds lights on the material engineering in related energy storage application.

"Lewis Base-Hungry" Amorphous-Crystalline Nickel Borate-Nickel Sulfide Heterostructures by In Situ Structural Engineering as Effective Bifunctional Electrocatalysts toward Overall Water Splitting

The development of high-performance, low-cost, and long-lasting electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is urgently needed for effective electrochemical water splitting. In the present study, an engineering process was employed to prepare "Lewis base-hungry" amorphous-crystalline nickel borate-nickel sulfide (Ni₃(BO₃)₂-Ni₃S₂) heterostructures, which exhibited unprecedentedly high electrocatalytic activity toward both OER and HER in alkaline media. The optimal Ni₃(BO₃)₂-Ni₃S₂/nickel foam (Ni₃(BO₃)₂-Ni₃S₂/NF) electrode displayed an ultralow overpotential of only -92 and +217 mV to reach the current density of 10 mA cm^-2 for HER and OER, respectively. When the Ni₃(BO₃)₂-Ni₃S₂/NF electrode was used as both the anode and cathode for overall water splitting, a low cell voltage of 1.49 V was needed to achieve the current density of 10 mA cm^-2, which was superior to the performance of most noble metal-free electrocatalysts. Results from density functional theory calculations showed that the Lewis base-hungry sites in the heterostructures effectively enhanced the chemisorption of hydrogen and oxygen intermediates, a critical step in HER and OER electrocatalysis. Results from this study highlight the significance of rational design and engineering of heterostructured materials for the development of high-efficiency electrocatalysts.

Photoactivated Mixed In-Plane and Edge-Enriched p-Type MoS2 Flake-Based NO2 Sensor Working at Room Temperature

Toxic gases are produced during the burning of fossil fuels. Room temperature (RT) fast detection of toxic gases is still challenging. Recently, MoS₂ transition metal dichalcogenides have sparked great attention in the research community due to their performance in gas sensing applications. However, MoS₂ based gas sensors still suffer from long response and recovery times, especially at RT. Considering this challenge, here, we report photoactivated highly reversible and fast detection of NO₂ sensors at room temperature (RT) by using mixed in-plane and edge-enriched p-MoS₂ flakes (mixed MoS₂). The sensor showed fast response with good sensitivity of ∼10.36% for 10 ppm of NO₂ at RT without complete recovery. However, complete recovery was obtained with better sensor performance under UV light illumination at RT. The UV assisted NO₂ sensing showed improved performance in terms of fast response and recovery kinetics with enhanced sensitivity to 10 ppm NO₂ concentration. The sensor performance is also investigated under thermal energy, and a better sensor performance with reduced sensitivity and high selectivity toward NO₂ was observed. A detailed gas sensing mechanism based on the density functional theory (DFT) calculations for favorable NO₂ adsorption sites on in-plane and edge-enriched MoS₂ flakes is proposed. This study revealed the role of favorable adsorption sites in MoS₂ flakes for the enhanced interaction of target gases and developed a highly sensitive, reversible, and fast gas sensor for next-generation toxic gases at room temperature.

MoS2 Quantum Dot Growth Induced by S Vacancies in a ZnIn2S4 Monolayer: Atomic-Level Heterostructure for Photocatalytic Hydrogen Production

It is highly demanded to steer the charge flow in photocatalysts for efficient photocatalytic hydrogen reactions (PHRs). In this study, we developed a smart strategy to position MoS₂ quantum dots (QDs) at the S vacancies on a Zn facet in monolayered ZnIn₂S₄ (Vs-M-ZnIn₂S₄) to craft a two-dimensional (2D) atomic-level heterostructure (MoS₂QDs@Vs-M-ZnIn₂S₄). The electronic structure calculations indicated that the positive charge density of the Zn atom around the sulfur vacancy (Vs) was more intensive than other Zn atoms. The Vs confined in monolayered ZnIn₂S₄ established an important link between the electronic manipulation and activities of ZnIn₂S₄. The Vs acted as electron traps, prevented vertical transmission of electrons, and enriched electrons onto the Zn facet. The Vs-induced atomic-level heterostructure sewed up vacancy structures of Vs-M-ZnIn₂S₄, resulting in a highly efficient interface with low edge contact resistance. Photogenerated electrons could quickly migrate to MoS₂QDs through the intimate Zn-S bond interfaces. As a result, MoS₂QDs@Vs-M-ZnIn₂S₄ showed a high PHR activity of 6.884 mmol g^-1 h^-1, which was 11 times higher than 0.623 mmol g^-1 h^-1 for bulk ZnIn₂S₄, and the apparent quantum efficiency reached as high as 63.87% (420 nm). This work provides a prototype material for looking into the role of vacancies between electronic structures and activities in 2D photocatalytic materials and gives insights into PHR systems at the atomic level.

An Anomalous Formation Pathway for Dislocation-Sulfur Vacancy Complexes in Polycrystalline Monolayer MoS2

Two-dimensional (2D) molybdenum disulfide (MoS2) has attracted significant attention recently due to its direct bandgap semiconducting characteristics. Experimental studies on monolayer MoS2 show that S vacancy concentration varies greatly; while recent theoretical studies show that the formation energy of S vacancy is high and thus its concentration should be low. We perform density functional theory calculations to study the structures and energetics of vacancy and interstitial in both grain boundary (GB) and grain interior (GI) in monolayer MoS2 and uncover an anomalous formation pathway for dislocation-double S vacancy (V2S) complexes in MoS2. In this pathway, a (5|7) defect in an S-polar GB energetically favorably converts to a (4|6) defect, which possesses a duality: dislocation and double S vacancy. Its dislocation character allows it to glide into GI through thermal activation at high temperatures, bringing the double vacancy with it. Our findings here not only explain why VS is predominant in exfoliated 2D MoS2 and V2S is predominant in chemical vapor deposition (CVD)-grown 2D MoS2 but also reproduce GB patterns in CVD-grown MoS2. The new pathway for sulfur vacancy formation revealed here provides important insights and guidelines for controlling the quality of monolayer MoS2.