Electrochemical assembly of single-walled carbon nanotube/polypyrrole/tellurium/lead telluride multi-layer nanocomposite films for room-temperature flexible thermoelectric application

With the complexity and diversification of thermoelectric (TE) application scenarios, it becomes increasingly difficult for single-component thermoelectric materials to satisfy practical demands. Therefore, recent researches have largely focused on the development of the multi-component nanocomposites, which are probably a good solution for the TE application of some materials that are not eligible when used alone. In this work, a seires of single-walled carbon nanotube (SWCNT)/polypyrrole (PPy)/tellurium (Te)/lead telluride (PbTe) multi-layer flexible composite films were fabricated via the successive electrodeposition of the flexible PPy layer with a low thermal conductivity, the ultra-thin Te induction layer, and the brittle PbTe layer with a large Seebeck coefficient over the pre-fabricated SWCNT membrane electrode with a high electrical conductivity. Through the complementary advantages between different components and the multiple synergies of the interface engineering, the SWCNT/PPy/Te/PbTe composites harvested the excellent TE performance with a maximum power factor (PF) of 929.8 ± 35.4 µW m^-1 K^-2 at room temperature, outperforming those of most of the electrochemically-prepared organic/inorganic TE composites reported previously. This work evidenced that the electrochemical multi-layer assembly is a feasible tactic for constructing special thermoelectric materials to meet customized requirements, which could also be applied to other material platforms.

Development of Nafion/single-walled carbon nanotube integrated arrays for the rapid detection of salbutamol doping

Salbutamol (SAL), a drug originally intended for the treatment of bronchial and pulmonary diseases, has repeatedly been used for doping in competitive sports. Herein, an integrated array (NFCNT array) that prepared by template-assisted scalable filtration using Nafion-coated single-walled carbon nanotube (SWCNT) is presented for the rapid field detection of SAL. Spectroscopic and microscopic measurements were used to confirm the introduction of Nafion onto the surface of the array and to analyze the resulting morphological changes. The effects of Nafion addition on the resistance and electrochemical properties of the arrays (e.g., the electrochemically active area, charge-transfer resistance, and adsorption charge) are also discussed in depth. With an electrolyte/Nafion/SWCNT interface and moderate resistance, the NFCNT-4 array prepared containing 0.04 wt% Nafion suspension exhibits the greatest voltammetric response to SAL. Subsequently, a possible mechanism for the oxidation of SAL was proposed, and a calibration curve in the range of 0.1-15 μM was established. Finally, the NFCNT-4 arrays were applied to the detection of SAL in human urine samples with satisfactory recoveries.

Single-walled carbon nanotube conjugated cytochrome c as exogenous nano catalytic medicine to combat intracellular oxidative stress

Mitochondrial dysfunction has been reported to be one of the main causes of many diseases including cancer, type2 diabetes, neurodegenerative disorders, cardiac ischemia, sepsis, muscular dystrophy, etc. Under in vitro conditions, Cytochrome C (Cyt C) maintains mitochondrial homeostasis and stimulates apoptosis, along with being a key participant in the life-supporting function of ATP synthesis. Hence, the medicinal importance of Cyt C as catalytic defense is immensely important in various mitochondrial disorders. Here, we have developed a nanomaterial via electrostatically conjugating oxidized single-wall carbon nanotube with Cyt C (Cyt C@cSWCNT) for the exogenous delivery of Cyt C. The chemical and morphological characterization of the developed Cyt C@cSWCNT was done using UV-vis, FTIR, XPS, powder XRD, TGA/DSC, TEM, etc. The developed Cyt C@cSWCNT exhibited bifunctional catalase and peroxidase activity with K_m (∼ 642.7 μM and 351.6 μM) and V_max (∼0.33 μM/s and 2.62 μM/s) values, respectively. Also, through this conjugation Cyt C was found to retain its catalytic activity even at 60 °C, excellent catalytic recyclability (at least up to 3 times), and wider pH activity (pH = 3 to 9). Cyt C@cSWCNT was found to promote intracellular ROS quenching and maintain mitochondrial membrane potential and cellular membrane integrity via Na⁺/K⁺ ion homeostasis during the H₂O₂ stress. Overall the present strategy provides an alternative approach for the exogenous delivery of Cyt C which can be used as nano catalytic medicine.

Real-time monitoring of 5-HT release from cells based on MXene hybrid single-walled carbon nanotubes modified electrode

Serotonin (5-HT) is an essential inhibitory neurotransmitter in vivo that is critical for interneuronal communication of the nervous system. Herein, we constructed an electrochemical cell-sensing platform for 5-HT detection based on MXene/single-walled carbon nanotubes (SWCNTs) nanocomposite. The one-dimensional SWCNTs with good electrical conductivity are uniformly dispersed on the surface and intermediate layers of the two-dimensional MXene to form a tightly heterogeneous heterostructure. The synthesized MXene-SWCNTs could improve the stacking problem of MXene nanosheets and expose more active sites, effectively promoting the conductive properties and electrochemical activity of the composite. The fabricated MXene-SWCNTs/GCE possessed outstanding detection capability for 5-HT with a wide linear range of 4 nM-103.2 μM and a low detection limit of 1.5 nM. Moreover, the sensor was further applied for the real-time monitoring trace amount of 5-HT releasing from different cell lines, which confirmed its promising applications in 5-HT related physiological and pathological fields. MXene-SWCNTs/GCE was developed and applied for the real-time monitoring of trace amounts of 5-HT secreted from living cells.

Printable Aligned Single-Walled Carbon Nanotube Film with Outstanding Thermal Conductivity and Electromagnetic Interference Shielding Performance

Ultrathin, lightweight, and flexible aligned single-walled carbon nanotube (SWCNT) films are fabricated by a facile, environmentally friendly, and scalable printing methodology. The aligned pattern and outstanding intrinsic properties render "metal-like" thermal conductivity of the SWCNT films, as well as excellent mechanical strength, flexibility, and hydrophobicity. Further, the aligned cellular microstructure promotes the electromagnetic interference (EMI) shielding ability of the SWCNTs, leading to excellent shielding effectiveness (SE) of ~ 39 to 90 dB despite a density of only ~ 0.6 g cm^-3 at thicknesses of merely 1.5-24 µm, respectively. An ultrahigh thickness-specific SE of 25 693 dB mm^-1 and an unprecedented normalized specific SE of 428 222 dB cm² g^-1 are accomplished by the freestanding SWCNT films, significantly surpassing previously reported shielding materials. In addition to an EMI SE greater than 54 dB in an ultra-broadband frequency range of around 400 GHz, the films demonstrate excellent EMI shielding stability and reliability when subjected to mechanical deformation, chemical (acid/alkali/organic solvent) corrosion, and high-/low-temperature environments. The novel printed SWCNT films offer significant potential for practical applications in the aerospace, defense, precision components, and smart wearable electronics industries.

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L^-1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches.

High-performance olfactory receptor-derived peptide sensor for trimethylamine detection based on Steglich esterification reaction and native chemical ligation connection

Trimethylamine (TMA) commonly exists in daily life and is harmful to human health, therefore the convenient and sensitive monitoring of TMA is highly desired. In this study, we developed a method to fabricate a high-performance TMA sensor by chemically conjugating olfactory receptor-derived peptides (ORPs) to single-walled carbon nanotubes (SWCNTs) on interdigital electrodes. First, the SWCNTs were modified with thioester by Steglich esterification reaction. Next, the ORPs with a cysteine residue at the N-terminus were connected to the thioester by native chemical ligation and modified to the surface of the SWCNTs. The chemical connection method enabled more effective loading of ORPs to the SWCNTs compared to the previously reported physical connection method. Using this approach, the ORPs-SWCNTs sensor for gaseous TMA was fabricated and enabled detection of TMA with a concentration as low as 0.01 parts per trillion, which was three orders of magnitude lower than the reported lowest detection limit up to date. Furthermore, we tested the performance of the ORP-sensor with vaporized TMA and TMA generated from various spoiled food, and the sensor exhibited excellent sensitivity, selectivity, and stability for TMA detection. The results demonstrated the effectiveness of the proposed chemical connection method for the fabrication of ORP-sensor and the great potential of using these sensors for applications in environmental safety, food quality evaluation, and healthcare.

Effects of geometrical parameters and functionalization percentage on the mechanical properties of oxygenated single-walled carbon nanotubes

The mechanical properties of oxygen-functionalized single-walled carbon nanotubes (CNTs) are studied herein by molecular dynamics (MD) simulations. An analysis of the random distribution of oxygen atoms on CNTs of various functionalization percentages is presented in this study. The influences of the nanotube length, diameter, and the percentage of functionalization on longitudinal Young's modulus, failure stress, strain, and toughness are investigated. The results show that for both zigzag and armchair chiralities, Young's modulus decreases by increasing the nanotube diameter and length-to-diameter ratio. Also, the values of all studied properties including Young's modulus, stress, strain, and toughness are reduced by increasing the functionalization percentage until the nanotube reaches failure. Moreover, the reason for the alteration of the mechanical properties of nanotubes and the behavior of the stress-strain diagram are discussed.

Ion-to-electron capacitance of single-walled carbon nanotube layers before and after ion-selective membrane deposition

The capacitance of the ion-to-electron transducer layer helps to maintain a high potential stability of solid-contact ion-selective electrodes (SC-ISEs), and its estimation is therefore an essential step of SC-ISE characterization. The established chronopotentiometric protocol used to evaluate the capacitance of the single-walled carbon nanotube transducer layer was revised in order to obtain more reliable and better reproducible values and also to allow capacitance to be measured before membrane deposition for electrode manufacturing quality control purposes. The capacitance values measured with the revised method increased linearly with the number of deposited carbon nanotube-based transducer layers and were also found to correlate linearly before and after ion-selective membrane deposition, with correlation slopes close to 1 for nitrate-selective electrodes, to 0.7 and to 0.5 for potassium- and calcium-selective electrodes.

Green fabrication of Cu/rGO decorated SWCNT buckypaper as a flexible electrode for glucose detection

As a paper-like membrane composed of single-walled carbon nanotube (SWCNT), buckypaper possesses high conductivity, ideal flexibility, large surface area, great thermal/chemical stability and biocompatibility, which has manifested its potential as an alternative support material. However, due to the lack of defects, high quality SWCNT synthesized by arc-discharge method is difficult to be modified with metal nanoparticles for electro-catalysis. In this paper, a novel green strategy has been developed to fabricate SWCNT buckypaper decorated with Cu/reduced graphene oxide (Cu/rGO-BP) for the first time, in which graphene oxide functions as the intermediate between SWCNT and Cu nanoparticles. The fabricated Cu/rGO-BP was applied as a flexible electrode for electrochemical glucose detection. The electrode exhibited excellent electro-catalytic activity for glucose oxidation. The sensor based on Cu/rGO-BP performed a high upper limit of linear range (25 mM), which is close to commercial glucose sensors. The proposed strategy for Cu/rGO-BP fabrication can be extended to modify buckypaper with other metal or metal oxide nanoparticles, and thus opens an innovative route to potential practical applications of flexible buckypaper in wearable bioelectronics.

Three-dimensional, millimeter-scale semiconducting SWCNT aerogels for highly sensitive ozone detection

Semiconducting frameworks possessing porous structure are promising platforms for the detection of hazardous gas molecules. In this study, we propose a facile route to fabricate millimeter-scale, three-dimensional semiconducting SWCNT (s-SWCNT) aerogels and demonstrate deactivation of the co-existing metallic SWCNT (m-SWCNT) network via electrical breakdown process. In particular, the on-off ratio of the modulated semiconducting aerogel after the electrical breakdown process was 205, which is an increase of 18.9 times over that before the process. The modulated semiconducting SWCNT aerogels with a large specific surface area (∼1270 m² g^-1) demonstrated their applicability for highly sensitive ppb-level ozone detection. The modulated semiconducting networks led to a 1310 % increase in the magnitude of response to 30-ppb ozone gas injection compared with that of pristine SWCNT aerogels. Furthermore, the prepared aerogels could detect 3 ppb of ozone within 40 s and retain stable reversible ozone detection for 200 cyclic operations over 100 h. Thus, the proposed semiconducting SWCNT aerogels are a promising candidate for highly sensitive environmental gas sensors.

Tracing chirality, diameter dependence, and temperature-controlling of single-walled carbon nanotube non-covalent functionalization by biologically compatible peptide: insights from molecular dynamics simulations

Biological applications of single-walled carbon nanotubes (SWCNTs), including drug delivery, require their functionalization with various functional groups such as peptides. Recently, a biologically compatible peptide (named PW3 with the sequence of NH₂-Trp-Val-Trp-Val-Trp-Val-Lys-Lys-COOH) has been introduced as a good candidate for modification of carbon nanotubes due to its high affinity toward the exterior surface of these nano-carriers. In order to optimize the process of SWCNT peptide functionalization, the effects of chirality and diameter of SWCNTs as well as the temperature on PW3 adsorption were systematically investigated using molecular dynamics (MD) simulation. It was found that modification of chiral/zigzag SWCNT by PW3 peptide was more suitable compared with the armchair system due to the strong peptide-nanotube interactions and more water solubility at 310 K which can be well explained by microscopic structural investigations. Regarding the enhanced peptide-chiral nanotube interactions at the low temperature of 277 K, chiral nanotubes can be effective structures for SWCNT functionalization process at reduced temperatures. Our analysis indicated that disrupted PW3 and SWCNT hydration patterns and fewer internal interactions within the peptide could be responsible for the stronger peptide modification of SWCNT at higher temperatures. Additionally, "PW3/SWCNT" systems containing larger tube diameters formed more stable complexes owing to their effective surface area increment.

Synthetic probe development for measuring single or few-cell activity and efflux

Studying the single cell protein secretome offers the opportunity to understand how a phenotypically heterogeneous population of individual cells contribute to ensemble physiology and signaling. Polarized secretion events such as neurotransmitter release and cytokine signaling necessitates spatiotemporal information to elucidate structure-function relationships. Polymer functionalized single-walled carbon nanotube protein sensor arrays allow microscopic imaging of secreted protein footprints and enable the study of the spatiotemporal heterogeneity of protein secretion at the single-cell level. The protocols for carbon nanotube sensor creation, sensor array preparation, and imaging secreted proteins in both prokaryotic and mammalian cells are presented in this chapter. Secreted RAP1 and HIV-1 integrase proteins were used as proof-of-concept examples. Additionally, we discuss potential variety of protein and non-protein analyte effluxes that can be imaged using this platform, as well as current and future perspectives related to sensor development and deployment.

Phototherapy using immunologically modified carbon nanotubes to potentiate checkpoint blockade for metastatic breast cancer

Metastasis is the major cause of cancer-death. Checkpoint inhibition shows great promise as an immunotherapeutic treatment for cancer patients. However, most currently available checkpoint inhibitors have low response rates. To augment the antitumor efficacy of checkpoint inhibitors, such as CTLA-4 antibodies, a single-walled carbon nanotube (SWNT) modified by a novel immunoadjuvant, glycated chitosan (GC), was used for the treatment of metastatic mammary tumors in mice. We treated the primary tumors by intratumoral administration of SWNT-GC, followed with irradiation with a 1064-nm laser to achieve local ablation through photothermal therapy (PTT). The treatment induced a systemic antitumor immunity which inhibited lung metastasis and prolonged the animal survival time of treated. Combining SWNT-GC-laser treatment with anti-CTLA-4 produced synergistic immunomodulatory effects and further extended the survival time of the treated mice. The results showed that the special combination, PTT + SWNT-GC + anti-CTLA, could effectively suppress primary tumors and inhibit metastases, providing a new treatment strategy for metastatic cancers.

A very sensitive and highly selective organic selector in CNTs composite chemiresistive for efficient differentiation of organic amine vapours

With the call for the IoE (Internet of Everything), stable and efficient electric noses/tongues have become the most critical part of the sensor network. Identifying target gases efficiently and rapidly at ambient air becomes a focus on sensor research. We designed a chemiresistive sensor based on a composite of a specific selector and single-walled carbon nanotubes (SWNTs) for the detection and differentiation of organic amine vapours in air (25 ℃, 55% RH). The synergetic combination of F4-TCNQ (2,3,5,6-Tetrafluoro-7,7',8,8'-tetracyanoquinodimethane) and SWCNTs could modulate the electrical properties of sensor leading to the enhancement of response up to ppb-level for primary amine vapor detection. Different from traditional chemiresistive sensor, this sensing materials exhibit unique differences in response to different types of amines thought different mechanisms. We have proven the practical possibilities through the detection of the simulated complexed environmental atmosphere in industrial production. Furthermore, we explored the working mechanism of high-performance sensors, which could provide theoretical guidance for sensor design for more commercial applications. This study provided a simple, convenient, and highly efficient practical method for organic amine detection at ambient air for real-life applications.

Undulation induced tuning of electron acceptance by edge-oxidized graphene oxide

Edge-oxidized graphene oxide (EOGO) nanosheets are good acceptors of electrons. We have employed a suitably designed pyrene-tailed fluorescent probe to establish that the electron acceptability of EOGO can be tuned by undulation of the GO sheet. Comparison between EOGO and single-walled carbon nanotubes (SWCNT) on electron acceptance from the probe molecule shows that the efficiency of π-π stacking between pyrene and the graphene sheet plays the key role.

The protective efficacy of four iron-related recombinant proteins and their single-walled carbon nanotube encapsulated counterparts against Aeromonas hydrophila infection in zebrafish

Iron-related proteins play important roles in iron homeostasis, and they may be potential vaccine candidates against pathogenic Aeromonas hydrophila. In addition, the encapsulation of antigens in single-walled carbon nanotubes (SWCNTs) has recently been shown to effectively stimulate the host immune response. To investigate the immune response of zebrafish to iron-related proteins and SWCNT-encapsulated proteins, we overexpressed and purified four iron-related recombinant proteins (P55870, A0KGK5, A0KPP0, and A0KIY3) from A. hydrophila. We then vaccinated zebrafish with these proteins and their SWCNT-encapsulated counterparts via both intraperitoneal injection and bath immunization. The target proteins evoked an immune response in zebrafish after intraperitoneal injection, and SWCNT-encapsulation significantly increased the immune response after bath immunization. When challenged with virulent A. hydrophila, zebrafish administered 5 μg intraperitoneal injections of SWCNT-P55870, A0KGK5, A0KPP0, or A0KIY3 had remarkably high relative percent survivals (RPSs) (50%, 55.6%, 66.7%, and 94.44% respectively). The RPSs of zebrafish vaccinated via immunization bath with 40 mg/L SWCNT-encapsulated counterparts were also high (52.94%, 55.56%, 61.11%, and 86.11%, respectively). These results indicated that zebrafish vaccinated with P55870, A0KGK5, SWCNT-P55870, and SWCNT-A0KGK5 were partially protected, while A0KPP0 and A0KIY3 were promising vaccine candidates against pathogenic A. hydrophila infection.

In vitro study of the anticancer activity of various doxorubicin-containing dispersions

Introduction: The aim of this research was to study the impact of various doxorubicin (Dox)-containing nanofluids, e.g. singlewalled carbon nanotube (SWCNT)+Dox, graphene oxide (GO)+Dox and DextranPNIPAM (copolymer)+Dox mixtures on HeLa cells (human transformed cervix epithelial cells, as a model for cancer cells) depending on their concentration. Methods: Structural analysis of GO+Dox complex was accomplished using Hartree-Fock level of theory in 6-31G** basis set in Gaussian. Dynamic light scattering (DLS), zeta-potential, scanning electron microscopy and confocal laser scanning microscopy were used. The cell viability was analyzed by the MTT assay. Results: The viability of HeLa cells was studied with the MTT assay after the incubation with various Dox-containing dispersions depending on their concentration. The size of the particles was determined by DLS. The morphology of the nanoparticles (NPs) was studied by scanning electron microscopy and their uptake into cells was visualized by confocal laser scanning microscopy. It was found that the Dextran-PNIPAM+Dox nanofluid in contrast to Dox alone showed higher toxicity towards HeLa cells up to 80% after 24 hours of incubation, whereas the SWCNT+Dox and GO+Dox nanofluids at the same concentrations protected cells from Dox. Conclusion: The importance of Dextran-PNIPAM copolymer as a universal platform for drug delivery was established, and the huge potential of Dextran-PNIPAM+Dox NPs as novel anticancer agents was noted. Based on the in vitro study of the SWCNT+Dox and GO+Dox nanofluids, it was concluded that SWCNT and GO NPs can be effective cytoprotectors against the highly toxic drugs.

Affinity sensor for haemoglobin A1c based on single-walled carbon nanotube field-effect transistor and fructosyl amino acid binding protein

Haemoglobin A1c (HbA1c) is a significant glycaemic marker for diabetes mellitus. The level of HbA1c reflects the mean blood glucose level over the prior 2-3 months and it is useful for the assessment of therapeutic effectiveness and for diagnosis. In this study, we report the label-free affinity sensor for HbA1c based on the chemiresistor-type field-effect transistor, which has a simple sensor configuration. Single-walled carbon nanotubes (SWNTs) were used as the transducing element. The fructosyl amino acid binding protein from Rhizobium radiobacter (SocA), which binds to α-fructosyl amino acid specifically, was used as the biorecognition element for fructosyl valine (FV), the product of the proteolytic hydrolysis of HbA1c. The developed sensor shows the ability to measure as low as 1.2 nM FV, which is 14-fold more sensitive compared to the previously reported fluorescence-based sensor using SocA. This sensor also exhibits high specificity where no significant response is observed from either fructosyl lysine (FK) or glucose, which are potential interferents. FK is the ε-fructosyl amino acid from glycated albumin, another glycated protein, whereas glucose is naturally present at very high concentration in the blood. We propose that the modulation of the surface charges on the SWNTs caused by the conformational change in SocA upon ligand binding leads to the proportionate changes in the number of carriers in the SWNT channel.

A fundamental study of photoluminescence modulation from DNA-wrapped single-walled carbon nanotubes

In this study, we investigated the interaction of base sequence-assigned single-stranded DNA (ssDNA) molecules with the surfaces of single-walled carbon nanotube (SWNT)-thymine (T30)/cytosine (C30) hybrids (T30/C30-SWNT), by measuring the modulation of near-infrared (NIR) photoluminescence (PL). Significant PL shifts were observed when T30/C30-SWNTs were reacted with 30-mers of adenine (A30)/guanine (G30). In contrast, when non-complementary ssDNA was used, no significant energy shift was observed in the PL modulation except when T30-SWNTs were reacted with G30. Furthermore, atomic force microscopy (AFM) measurements revealed that the average heights of the T30-SWNTs and C30-SWNTs, after reaction with A30 were 2 ± 0.6 and 1.1 ± 0.3 nm, respectively. This result was in good agreement with the results of PL measurements. Our data reveal that DNA hybridization could be detected by measuring PL from SWNTs, without the use of fluorescent molecules. This leads to the possibility of developing nanotube-based photoelectric conversion or optical switch devices driven by organic molecules.

Effect of Enhanced Thermal Stability of Alumina Support Layer on Growth of Vertically Aligned Single-Walled Carbon Nanotubes and Their Application in Nanofiltration Membranes

We investigate the thermal stability of alumina supporting layers sputtered at different conditions and its effect on the growth of aligned single-walled carbon nanotube arrays. Radio frequency magnetron sputtering of alumina under oxygen-argon atmosphere produces a Si-rich alumina alloy film on a silicon substrate. Atomic force microscopy on the annealed catalysts reveals that Si-rich alumina films are more stable than alumina layers with low Si content at the elevated temperatures at which the growth of single-walled carbon nanotubes is initiated. The enhanced thermal stability of the Si-rich alumina layer results in a narrower (< 2.2 nm) diameter distribution of the single-walled carbon nanotubes. Thanks to the smaller diameters of their nanotube pores, membranes fabricated with vertically aligned nanotubes grown on the stable layers display improved ion selectivity.

Molecular dynamics simulation of the folding of single alkane chains with different lengths on single-walled carbon nanotubes and graphene

Chain folding is an important step during polymer crystallization. In order to study the effects of the surface on chain folding, molecular dynamics simulations of the folding of different alkane chains on three kinds of single-walled carbon nanotubes (SWCNTs) and graphene were performed. The folding behaviors of the single alkane chains on these surfaces were found to be different from their folding behaviors in vacuum. The end-to-end distances of the chains were calculated to explore the chain folding. An increasing tendency to fold into two or more stems with increasing alkane chain length was observed. This result indicates that the occurrence and the stability of chain folding are related to the surface curvature, the diameter of the SWCNT, and surface texture. In addition, the angle between the direction of the alkane chain segment and the direction of the surface texture was measured on different surfaces.

Effective deactivation of A549 tumor cells in vitro and in vivo by RGD-decorated chitosan-functionalized single-walled carbon nanotube loading docetaxel

This study aims to construct and evaluate RGD-decorated chitosan (CS)-functionalized pH-responsive single-walled carbon nanotube (SWCNT) carriers using docetaxel (DTX) as a model anticancer drug. DTX was loaded onto SWCNT via π-π stacking interaction (SWCNT-DTX), followed by the non-covalent conjugation of RGD-decorated CS to SWCNT-DTX to prepare RGD-CS-SWCNT-DTX. The RGD-CS-SWCNT-DTX showed significantly higher drug release than the pure drug, giving higher release rate at pH 5.0 (68%) than pH 7.4 (49%). The RGD-CS-SWCNT-DTX could significantly inhibit the growth of A549 tumor cells in vitro, and the uptake amount of A549 cells was obviously higher than that of MCF-7 cells. Meanwhile, the cellular uptake of RGD-CS-SWCNT-DTX was higher than that of CS-SWCNT-DTX in A549 cells, mainly through clathrin and caveolae-mediated endocytosis. The RGD-CS-SWCNT-DTX significantly inhibited tumor growth of A549 cell-bearing nude mice through active tumor-targeting ability. Furthermore, no pathological changes were found in tissues and organs. The result demonstrated that RGD-CS-SWCNT-DTX displayed high drug loading, pH-responsive drug release, remarkable antitumor effect in vitro and in vivo, and also good safety to animal body.

Length effects of single-walled carbon nanotubes on pulmonary toxicity after intratracheal instillation in rats

We aimed to evaluate the effects of the length of single-walled carbon nanotubes (SWCNTs) on pulmonary toxicity in rats. Each rat received a single intratracheal instillation of short (S-) (average length of 0.40 μm) or long (L-) (average length of 2.77 μm) SWCNTs at a dose of 1 mg/kg and was observed for the next 6 months. Neither S- nor L-SWCNTs affected clinical signs, body weight, or autopsy findings. An increase in lung weight was observed after instillation of S- or L-SWCNTs; however, lung weights were slightly higher in the rats that were administered the S-SWCNTs. Distinct differences in bronchoalveolar lavage fluid (BALF) composition were observed between the S- and L-SWCNT-treated rats as early as 7 days after the intratracheal instillations of the SWCNTs. The S-SWCNTs caused persistent lung injury and inflammation during the 6-month observational period. However, the L-SWCNTs induced minimal lung injury and inflammation. Although the S- and L-SWCNTs changed BALF parameters and histopathological features of the lung, the magnitudes of the changes observed after the S-SWCNT treatment were greater than the respective changes observed after the L-SWCNT treatment. These findings indicate that the severity of the pulmonary toxicity caused after intratracheal instillation of SWCNT depends on the length of the SWCNTs. It appears that shorter SWCNTs induce greater pulmonary toxicity than longer SWCNTs do.

Single-walled carbon nanotube: One specific inhibitor of cancer stem cells in osteosarcoma upon downregulation of the TGFβ1 signaling

Cancer stem cells (CSCs) are believed to have a critical role in tumorigenesis, metastasis, therapeutic resistance or recurrence. Therefore, strategies designed to specifically target and eliminate CSCs have become one of the most promising and desirable ways for tumor treatment. Osteosarcoma stem cells (OSCs), the CSCs in osteosarcoma (OS), are critically associated with OS progression. Here, we show that single-walled carbon nanotubes (SWCNTs), including unmodified SWCNT (SWCNT-Raw) and SWCNT-COOH, have the ability to specifically inhibit the process of TGFβ1-induced OS cells dedifferentiation, prevent the stem cell phenotypes acquisition in OS cells and reduce the OSC viability under conditions which mimic the OS microenvironment. Concurrently, SWCNT treatment significantly down-regulates the expression of OSC markers in OS, and markedly reduces the tumor microvessel density and tumor growth. Furthermore, we found that SWCNT could suppress the TGFβ1-induced activation of TGFβ type I receptor and downstream signaling, which are key for the OSC formation and maintenance. Our results reveal an unexpected function of SWCNT in negative modulation of OSCs, and provide significant implications for the potential CSCs-targeted therapeutic applications of SWCNT.

Using a fluorescence quenching method to detect DNA adsorption onto single-walled carbon nanotube surfaces

Surface modification of single-walled carbon nanotubes (SWNTs) with DNA molecules has attracted much attention in recent years to increase SWNT solubility and make various SWNT-based nanobiodevices. Therefore, there is a critical need to quantify the interaction between DNA molecules and SWNT surfaces, particularly the intermediate structures during DNA adsorption. In this study, we demonstrate the ability to detect the adsorption of DNA oligomers on SWNT surfaces by fluorescence spectroscopy. Fluorescein-labelled, 30mer, thymine oligonucleotides (F-T30) were employed as a fluorescent probe to study the interaction of DNA with SWNTs. A clear quenching effect was observed when F-T30 was adsorbed onto SWNT surfaces. Using this method, the amount of DNA adsorbed onto the SWNT surfaces was measured under different sonication conditions to correlate adsorption efficiency with sonication strength and duration. When a bath-type sonicator was used, mild adsorption of F-T30 on SWNT surfaces was observed. Furthermore, a two-step adsorption was observed in this condition. In contrast, we observed rapid adsorption of F-T30 to SWNT surfaces at the higher sonication amplitude (60% maximal) using a probe-type sonicator, while only slight adsorption of DNA molecules was observed at the lower amplitude (20% maximal). Our data revealed that the quenching effect can be used to evaluate DNA adsorption onto SWNT surfaces. In addition, atomic force microscopy (AFM) and photoacoustic spectroscopy (PAS) were conducted to provide complementary information on the DNA-SWNT nanoconjugates.

Carbon nanotube capsules enhance the in vivo efficacy of cisplatin

Over the past few years, numerous nanotechnology-based drug delivery systems have been developed in an effort to maximize therapeutic effectiveness of conventional drug delivery, while limiting undesirable side effects. Among these, carbon nanotubes (CNTs) are of special interest as potential drug delivery agents due to their numerous unique and advantageous physical and chemical properties. Here, we show in vivo favorable biodistribution and enhanced therapeutic efficacy of cisplatin (CDDP) encapsulated within ultra-short single-walled carbon nanotube capsules (CDDP@US-tubes) using three different human breast cancer xenograft models. In general, the CDDP@US-tubes demonstrated greater efficacy in suppressing tumor growth than free CDDP in both MCF-7 cell line xenograft and BCM-4272 patient-derived xenograft (PDX) models. The CDDP@US-tubes also demonstrated a prolonged circulation time compared to free CDDP which enhanced permeability and retention (EPR) effects resulting in significantly more CDDP accumulation in tumors, as determined by platinum (Pt) analysis via inductively-coupled plasma mass spectrometry (ICP-MS).

STATEMENT OF SIGNIFICANCE

Over the past decade, drug-loaded nanocarriers have been widely fabricated and studied to enhance tumor specific delivery. Among the diverse classes of nanomaterials, carbon nanotubes (CNTs), or more specifically ultra-short single-walled carbon nanocapsules (US-tubes), have been shown to be a popular, new platform for the delivery of various medical agents for both imaging and therapeutic purposes. Here, for the first time, we have shown that US-tubes can be utilized as a drug delivery platform in vivo to deliver the chemotherapeutic drug, cisplatin (CDDP) as CDDP@US-tubes. The studies have demonstrated the ability of the US-tube platform to promote the delivery of encapsulated CDDP by increasing the accumulation of drug in breast cancer resistance cells, which reveals how CDDP@US-tubes help overcome CDDP resistance.

Adsorption of plasma proteins onto PEGylated single-walled carbon nanotubes: The effects of protein shape, PEG size and grafting density

Single-walled carbon nanotubes (SWCNTs) covalently functionalized or noncovalently coated with polyethylene glycol (PEG) of different sizes (M_w=2000 and 5000) and grafting densities (5-16 PEGs per SWCNT) are simulated with human fibrinogen (HFG) and serum albumin (HSA). Proteins migrate toward the SWCNT, but their adsorption extents differ. The extent of the HFG-SWCNT binding decreases with increasing PEG size and grafting density because PEGs more completely cover SWCNTs and thus block hydrophobic interactions between HFGs and SWCNTs, which occurs on PEG-functionalized SWCNTs but not on PEG-coated ones. In particular, the HFG-SWCNT binding significantly decreases in the transition region of PEG conformation from mushroom to brush, where PEGs extend like brushes as described in the Alexander-de Gennes theory. While the HFG adsorption is modulated by PEG conformation, the HSA adsorption is much weaker and less influenced by PEG, because spherical HSAs can bind to the restricted area of the SWCNT and thus cannot bind to the SWCNT as tightly as do linear HFGs. These findings agree with experiments showing less adsorption of proteins on the SWCNT functionalized with larger and more PEGs, and support experimental suggestions regarding the dependence of protein adsorption on protein shape and the mushroom-brush transition of PEG conformation.

Enzymatic degradation of aromatic hydrocarbon intermediates using a recombinant dioxygenase immobilized onto surfactant-activated carbon nanotube

This study examined the enzymatic decomposition of aromatic hydrocarbon intermediates (catechol, 4-chlorocatechol, and 3-methylcatechol) using a dioxygenase immobilized onto single-walled carbon nanotube (SWCNT). The surfaces of SWCNTs were activated with surfactants. The dioxygenase was obtained by recombinant technique: the corresponding gene was cloned from Arthrobacter chlorophenolicus A6, and the enzyme was overexpressed and purified subsequently. The enzyme immobilization yield was 62%, and the high level of enzyme activity was preserved (60-79%) after enzyme immobilization. Kinetic analyses showed that the substrate utilization rates and the catalytic efficiencies of the immobilized enzyme for all substrates (target aromatic hydrocarbon intermediates) tested were similar to those of the free enzyme, indicating that the loss of enzyme activity was minimal during enzyme immobilization. The immobilized enzyme was more stable than the free enzyme against abrupt changes in pH, temperature, and ionic strength. Moreover, it retained high enzyme activity even after repetitive use.

Combining the single-walled carbon nanotubes with low voltage electrical stimulation to improve accumulation of nanomedicines in tumor for effective cancer therapy

Effective delivery of biomolecules or functional nanoparticles into target sites has always been the primary objective for cancer therapy. We demonstrated that by combining single-walled carbon nanotubes (SWNTs) with low-voltage (LV) electrical stimulation, biomolecule delivery can be effectively enhanced through reversible electroporation (EP). Clear pore formation in the cell membrane is observed due to LV (50V) pulse electrical stimulation amplified by SWNTs. The cell morphology remains intact and high cell viability is retained. This modality of SWNT + LV pulses can effectively transfer both small molecules and macromolecules into cells through reversible EP. The results of animal studies also suggest that treatment with LV pulses alone cannot increase vascular permeability in tumors unless after the injection of SWNTs. The nanoparticles can cross the permeable vasculature, which enhances their accumulation in the tumor tissue. Therefore, in cancer treatment, both SWNT + LV pulse treatment followed by the injection of LIPO-DOX® and SWNT/DOX + LV pulse treatment can increase tumor inhibition and delay tumor growth. This novel treatment modality applied in a human cancer xenograft model can provide a safe and effective therapy using various nanomedicines in cancer treatment.

Gate-Free Electrical Breakdown of Metallic Pathways in Single-Walled Carbon Nanotube Crossbar Networks

Aligned single-walled carbon nanotubes (SWNTs) synthesized by the chemical vapor deposition (CVD) method have exceptional potential for next-generation nanoelectronics. However, the coexistence of semiconducting (s-) and metallic (m-) SWNTs remains a considerable challenge since the latter causes significant degradation in device performance. Here we demonstrate a facile and effective approach to selectively break all m-SWNTs by stacking two layers of horizontally aligned SWNTs to form crossbars and applying a voltage to the crossed SWNT arrays. The introduction of SWNT junctions amplifies the disparity in resistance between s- and m-pathways, leading to a complete deactivation of m-SWNTs while minimizing the degradation of the semiconducting counterparts. Unlike previous approaches that required an electrostatic gate to achieve selectivity in electrical breakdown, this junction process is gate-free and opens the way for straightforward integration of thin-film s-SWNT devices. Comparison to electrical breakdown in junction-less SWNT devices without gating shows that this junction-based breakdown method yields more than twice the average on-state current retention in the resultant s-SWNT arrays. Systematic studies show that the on/off ratio can reach as high as 1.4 × 10(6) with a correspondingly high retention of on-state current compared to the initial current value before breakdown. Overall, this method provides important insight into transport at SWNT junctions and a simple route for obtaining pure s-SWNT thin film devices for broad applications.

Scalability of the Heat and Current Treatment on SWCNTs to Improve their Crystallinity and Thermal and Electrical Conductivities

We have investigated the scalability of our post-synthesis graphitization process for single-walled carbon nanotubes (SWCNTs), which applies heat and current to SWCNTs to improve the thermal and electrical conductivities. This investigation was performed by examining the relationship between the processing conditions and the amount of treated SWCNTs. Characterization of all cases of treated SWCNTs showed the same level of improvement of ~3 times to both the thermal and electrical conductivities and that the SWCNTs remained SWCNTs, i.e., no change in diameter or wall number. These results provided evidence that the ability to improve the crystallinity of the SWCNTs was independent of the treatment amount. Further, our results showed that an increase in SWCNT amount required increased applied current density or increased in applied temperature to achieve optimum property improvement. Finally, we found a trade-off between the current density and temperature indicating that either a high current or high temperature was required to achieve the optimum process conditions. These results demonstrated that our heat and current SWCNT treatment was fundamentally scalable and applied towards larger scale (i.e., gram-level or more) amounts of SWCNT.

Single-Walled Carbon Nanotubes Toxicity to the Freshwater Amphipod Hyalella Azteca: Influence of to the Freshwater Amphipod Sediment and Exposure Duration

Carbon nanomaterials are present in various industrial applications and therefore their release into the environment including freshwater ecosystem is expected to increase. The aim of the present study was to investigate the influence of several parameters on the toxicity of single-walled carbon nanotubes (SWCNT) to the freshwater amphipod, Hyalella azteca. The effect of period of exposure, sediment presence and possible impurities released during SWCNT preparation on survival and/or growth of such organism was evaluated. We measured a reduction of survival at concentrations ranging from 10 to 40 mg/L after 96-h exposure, while no mortality was observed with the same concentrations and in the presence of artificial sediment after 14 days of exposure. It is possible that SWCNT are adsorbed on the organic matter from the artificial sediment leading to a decrease of SWCNT bioavailability. The survival and growth toxicity tests revealed a stronger effect at 28 days compared to the 14 days of exposure, and full mortality of organisms at 1000 mg/L for both exposure times. The presence of SWCNT in the gut of survived organisms was observed. The present study demonstrates that the interaction with sediment should be considered when carbon nanotubes toxicity through water exposure is investigated.

Single-walled carbon nanotubes functionalized with aptamer and piperazine-polyethylenimine derivative for targeted siRNA delivery into breast cancer cells

Epithelial cell adhesion molecule (EpCAM) is a glycosylated type 1 membrane protein which is frequently over expressed in most solid tumors and it has recently been identified as a cancer stem cell (CSC) marker. Specific targeting of CSCs using nano-carriers would enhance treatment efficacy of cancer. In this study, we used a RNA aptamer against EpCAM (EpDT3) attached physically to our newly synthesized non-viral vector, based on single-walled carbon nanotube (SWNT) conjugated to piperazine-polyethylenimine derivative. The DNA transfection efficiency and siRNA delivery activity of the synthesized vector was investigated against upregulated BCL9l, which has been associated with breast and colorectal cancers. The complexes of the vector-aptamer/siRNA could specifically induce apoptosis by more than 20% in MCF-7 cell line as a positive EpCAM than MDA-MB-231 cells which are EpCAM negative. The decrease of BCL9l protein level was observed with western blot analysis in MCF-7 cells indicating the targeted silencing activity of the complex.

Controlling the Diameter of Single-Walled Carbon Nanotubes by Improving the Dispersion of the Uniform Catalyst Nanoparticles on Substrate

To have uniform nanoparticles individually dispersed on substrate before single-walled carbon nanotubes (SWNTs) growth at high temperature is the key for controlling the diameter of the SWNTs. In this letter, a facile approach to control the diameter and distribution of the SWNTs by improving the dispersion of the uniform Fe/Mo nanoparticles on silicon wafers with silica layer chemically modified by 1,1,1,3,3,3-hexamethyldisilazane under different conditions is reported. It is found that the dispersion of the catalyst nanoparticles on Si wafer surface can be improved greatly from hydrophilic to hydrophobic, and the diameter and distribution of the SWNTs depend strongly on the dispersion of the catalyst on the substrate surface. Well dispersion of the catalyst results in relatively smaller diameter and narrower distribution of the SWNTs due to the decrease of aggregation and enhancement of dispersion of the catalyst nanoparticles before growth. It is also found that the diameter of the superlong aligned SWNTs is smaller with more narrow distribution than that of random nanotubes.

Micellar stabilized single-walled carbon nanotubes for a pH-sensitive delivery of doxorubicin

Single-walled carbon nanotubes (SWNTs) are among the promising nano-devices for delivery of therapeutic agents. Yet the drastic hydrophobic natures of SWNTs make their handling and hence application difficult. Several researches have been conducted to make them more hydrophilic and water dispersible and less toxic. Among the different approaches, dispersion methods exploit different reagents such as surfactants and block copolymers. The question is whether these so called dispersed SWNTs are stable enough and suitable for biomedical applications. Herein we aimed to functionalize SWNT surface by dioleoylphosphatidylethanolamine-polyethylene glycol (PL-PEG) and sodium deoxycholate (SDC) micelles and compare their efficacy in SWNT stabilization for biomedical application such as delivery of doxorubicin. Shortening and water dispersion of SWNTs were carried out by ultrasonication in aqueous solutions at different concentrations of SDC or PL-PEG micelle and assessed by UV-Vis-NIR spectroscopy. The stability of SWNT dispersions were assessed over the time and in the presence of salt by macroscopic observation and UV-Vis-NIR spectroscopy. Doxorubicin loading and release were carried out under different pH conditions. SWNT dispersions were stable in water for at least several weeks at room temperature, but SDC prepared dispersions were prone to agglomeration in the presence of salt and doxorubicin. The critical PL-PEG concentration for stability in physiologic conditions was about 5 times its critical micelle concentration. Doxorubicin loading was pH dependent and its release was triggered in acidic condition of tumor medium.

Potentiating toxicological interaction of single-walled carbon nanotubes with dissolved metals

The present study explored the ecotoxicology of single-walled carbon nanotubes (SWCNTs) and their likely interaction with dissolved metals, with a focus on the effect of in vivo exposure in marine mussels. Any nano-scale effects were negated by the tendency of uncoated SWCNTs to agglomerate in water, particularly with high ionic strength as is the case in estuarine and full-strength seawater. However, SWCNTs, in combination with natural organic matter, remained suspended in seawater for long enough to become available to filter-feeding mussels, leading to their concentration on and increased contact with gill epithelia during exposure. For the first time, the authors describe a potentiating toxicological effect, expressed as DNA strand breaks obtained using the comet assay, on divalent metals afforded by negatively charged SWCNT agglomerates in seawater at concentrations as low as 5 µg L⁻¹. This is supported by the observation that SWCNTs alone were only toxic at concentrations ≥100 µg L⁻¹ and that the SWCNT-induced DNA damage was correlated with oxidative stress only in the absence of metals. If these laboratory experiments are confirmed in the natural environment, the present results will have implications for the understanding of the role of carbon nanotubes in environmental metal dynamics, toxicology, and consequently, regulatory requirements.

Photothermal ablation of tumor cells using a single-walled carbon nanotube-peptide composite

Single-walled carbon nanotubes (SWCNTs) are known to have great potential for biomedical applications such as photothermal ablation of tumor cells in combination with near-infrared (NIR) irradiation. In this study, the photothermal activity of a novel SWCNTs composite with a designed peptide having a repeated structure of H-(-Lys-Phe-Lys-Ala-)7-OH [(KFKA)7] against tumor cells was evaluated in vitro and in vivo. The SWCNT-(KFKA)7 composite demonstrated high aqueous dispersibility that enabled SWCNTs to be used in tumor ablation. The NIR irradiation of SWCNT-(KFKA)7 solution resulted in a rapid temperature increase dependent on the SWCNTs concentration up to 50μg/ml. Three minutes of NIR irradiation of a colon 26 or HepG2 cell culture incubated with SWCNT-(KFKA)7 resulted in remarkable cell damage, while that by single treatment with SWCNT-(KFKA)7 or NIR irradiation alone was moderate. The intratumoral injection of SWCNT-(KFKA)7 solution followed by NIR irradiation resulted in a rapid increase of the temperature to 43°C in the subcutaneously inoculated colon 26 tumor based on thermographic observation and remarkable suppression of tumor growth compared with treatment with only SWCNT-(KFKA)7 injection alone or NIR irradiation alone. These results suggest the a great potential of an SWCNT-peptide composite for use in photothermal cancer therapy.

The use of gadolinium-carbon nanostructures to magnetically enhance stem cell retention for cellular cardiomyoplasty

In this work, the effectiveness of using Gadonanotubes (GNTs) with an external magnetic field to improve retention of transplanted adult mesenchymal stem cells (MSCs) during cellular cardiomyoplasty was evaluated. As a high-performance T1-weighted magnetic resonance imaging (MRI) cell tracking label, the GNTs are gadolinium-loaded carbon nanotube capsules that render MSCs magnetic when internalized. MSCs were internally labeled with either superparamagnetic GNTs or colloidal diamagnetic lutetium (Lu). In vitro cell rolling assays and ex vivo cardiac perfusion experiments qualitatively demonstrated increased magnetic-assisted retention of GNT-labeled MSCs. Subsequent in vivo epicardial cell injections were performed around a 1.3 T NdFeB ring magnet sutured onto the left ventricle of female juvenile pigs (n = 21). Cell dosage, magnet exposure time, and endpoints were varied to evaluate the safety and efficacy of the proposed therapy. Quantification of retained cells in collected tissues by elemental analysis (Gd or Lu) showed that the external magnet helped retain nearly three times more GNT-labeled MSCs than Lu-labeled cells. The sutured magnet was tolerated for up to 168 h; however, an inflammatory response to the magnet was noted after 48 h. These proof-of-concept studies support the feasibility and value of using GNTs as a magnetic nanoparticle facilitator to improve cell retention during cellular cardiomyoplasty.

Dysprosium-catalyzed growth of single-walled carbon nanotube arrays on substrates

In this letter, we report that dysprosium is an effective catalyst for single-walled carbon nanotubes (SWNTs) growth via a chemical vapor deposition (CVD) process for the first time. Horizontally superlong well-oriented SWNT arrays on SiO2/Si wafer can be fabricated by EtOH-CVD under suitable conditions. The structure and properties are characterized by scanning electron microscopy, transition electron microscopy, Raman spectroscopy and atomic force microscopy. The results show that the SWNTs from dysprosium have better structural uniformity and better conductivity with fewer defects. This rare earth metal provides not only an alternative catalyst for SWNTs growth, but also a possible method to generate high percentage of superlong semiconducting SWNT arrays for various applications of nanoelectronic device.