Development of a green synchronous spectrofluorimetric technique for simultaneous determination of Montelukast sodium and Bilastine in pharmaceutical formulations

For the treatment of rhinitis and asthma, a combination of Montelukast sodium and Bilastine has just been approved. Based on the first derivative of synchronous fluorescence, the current work developed a green, highly accurate, sensitive, and selective spectroscopic approach for estimating Montelukast sodium and Bilastine in pharmaceutical dosage form without previous separation. The selected technique focuses on measuring the synchronized fluorescence of the studied medications at a fixed wavelength range (Δλ) = 110 nm, and using the amplitude of the first derivative's peak at 381 and 324 nm, for quantitative estimation of Montelukast sodium and Bilastine, respectively. The impacts of different factors on the referred drugs' synchronized fluorescence intensity were investigated and adjusted. The calibration plots for were found to be linear over concentration ranges of 50-2000 ng mL-1 for Montelukast sodium and 50-1000 ng mL-1 for Bilastine. Montelukast sodium and Bilastine have LODs of 16.5 and 10.9 ng mL-1, respectively. In addition, LOQs were: 49.9 and 33.0 ng mL-1, for both drugs, respectively. The developed method was successfully employed to quantify the two drugs in synthetic tablets mixture and in laboratory prepared mixtures containing varied Montelukast and Bilastine ratios. To compare the results with the published analytical approach, a variance ratio F-test and a student t-test were used, which revealed no significant differences.

Derivatization-free conventional and synchronous spectrofluorimetric estimation of atenolol and amlodipine

Fixed-dose combinations for treatment of hypertension are observed in many dosages in the global market because of their high efficacy compared to single component dosage forms. One of these effective combinations is atenolol/amlodipine which is usually administered to patients with hypertension. Hence, development of facile, accurate, and sensitive methods for simultaneous estimation of atenolol and amlodipine is of great importance for quality control testing and pharmacokinetic studies. In our study, we developed two spectrofluorimetric methods to estimate both compounds in different pharmaceuticals. The first method is based on the estimation of atenolol and amlodipine by double-scan conventional spectrofluorimetry where the fluorescence intensities of atenolol and amlodipine were measured at 299 and 434 nm after excitation at 274 and 358 nm, respectively. The second method depends on synchronous spectrofluorimetric measurements at Δλ = 70 nm, where atenolol is assayed at 266 nm and amlodipine is assayed at 363 nm. Methods' optimizations were carried out to select the optimum conditions that render high selectivity and sensitivity. Such optimizations included assessment of solvents, surfactants, buffer volumes and pHs. The conventional spectrofluorimetric method was rectilinear over concentration range of 30.0-300.0 ng mL-1 for atenolol and 0.25-7.00 µg mL-1 for amlodipine while the synchronous spectrofluorimetric method showed linearity over the ranges of 0.60-6.00 µg mL-1 for atenolol and 0.25-7.00 µg mL-1 for amlodipine with low detection limits (≤0.12 µg mL-1) for both compounds in the two methods. It is the first work that demonstrates estimation of atenolol and amlodipine in their combinations by conventional and synchronous spectrofluorimetry. Both methods were applied to estimate atenolol and amlodipine in different pharmaceuticals with high %recovery and low %RSD.

Coupling of synchronous fluorescence spectroscopy with derivative amplitude outcomes for simultaneous determination of metoprolol succinate and olmesartan medoxomil in combined pharmaceutical preparation: Application in spiked human plasma

For the first time a spectrofluorimetric method had been achieved for the concurrent analysis of metoprolol succinate (MET) and olmesartan medoxomil (OLM). The approach depended on assessing the first order derivative (¹D) of the synchronous fluorescence intensity of the two drugs in aqueous solution at Δλ of 100 nm. The amplitudes of ¹D at 300 nm and 347 nm were measured for MET and OLM, respectively. The linearity ranges were 100-1000 ng/mL and 100-5000 ng/mL for OLM and MET, respectively. This approach is uncomplicated, repetitive, quick, and affordable. The results of analysis had been statistically verified. The validation assessments were carried out following the recommendations of The International Council for Harmonization (ICH). This technique could be employed to assess marketed formulation. The method was sensitive with limits of detection (LOD) of 32 ng/ml and 14 ng/mL for MET and OLM, respectively. Limits of quantitation (LOQ) were 99 ng/ml for MET and 44 ng/mL for OLM. So it can be applied to determine both drugs in spiked human plasma within the linearity ranges of 100-1000 ng/mL for OLM and 100-1500 ng/mL for MET.

Synchronous spectrofluorimetric determination of favipiravir and aspirin at the nano-gram scale in spiked human plasma; greenness evaluation

Favipiravir and aspirin are co-administered during COVID-19 treatment to prevent venous thromboembolism. For the first time, a spectrofluorometric method has been developed for the simultaneous analysis of favipiravir and aspirin in plasma matrix at nano-gram detection limits. The native fluorescence spectra of favipiravir and aspirin in ethanol showed overlapping emission spectra at 423 nm and 403 nm, respectively, after excitation at 368 nm and 298 nm, respectively. Direct simultaneous determination with normal fluorescence spectroscopy was difficult. The use of synchronous fluorescence spectroscopy for analyzing the studied drugs in ethanol at Δλ = 80 nm improved spectral resolution and enabled the determination of favipiravir and aspirin in the plasma matrix at 437 nm and 384 nm, respectively. The method described allowed sensitive determination of favipiravir and aspirin over a concentration range of 10-500 ng/mL and 35-1600 ng/mL, respectively. The described method was validated with respect to the ICH M10 guidelines and successfully applied for the simultaneous determination of the mentioned drugs in pure form and in the spiked plasma matrix. Moreover, the compliance of the method with the concepts of environmentally friendly analytical chemistry was evaluated using two metrics, the Green Analytical Procedure Index and the AGREE tool. The results showed that the described method was consistent with the accepted metrics for green analytical chemistry.

Assay of new combination of tamsulosin and tadalafil using synchronous spectrofluorimetric method coupled with mathematical tools

A fixed-dose combination therapy of tamsulosin andtadalafilis now available for treatmentof lower urinary tract symptoms associated with benign prostatic hyperplasia. The decrease in sexual performance which is a side-effect of tamsulosin can be compensated by using tadalafil. This study is the first to develop and optimize a synchronous spectrofluorimetric method coupled with derivative and derivative ratio mathematical tools for the determination of tamsulosin andtadalafil in their newly released dosage form. The method successed in quantification of tadalafil by measuring the second-order derivative synchronous spectrofluorimetric amplitude at 278 nm (corresponding to zero-crossing of tamsulosin) using Δƛ=11 nm. On the other hand, first derivative ratio synchronous spectrofluorimetric peak amplitude was measured at 260 nm for determination of tamsulosin, using Δƛ=15 nm and divisor concentration of 0.1 µg mL^-1. The method validation was performed using ICH guidelines. The linear responses of tamsulosin andtadalafil were from 0.04 to 0.5 and 0.05-0.5 µg mL^-1, respectively. High sensitivity was achieved as represented by slope values of 0.32 and 608.4 for tamsulosin andtadalafil, respectively. The method is sensitive enough to detect concentration as low as 0.024 for both drugs. The proposed integrated spectrofluorimetric method showed good simplicity, selectivity and greenness. It can be successfully applied for analysis of both drugs in dosage form.

First-order derivative synchronous spectrofluorimetric determination of two antihypertensive drugs, metolazone and valsartan, in pharmaceutical and biological matrices

In this study, a facile, rapid, and sensitive spectrofluorimetric method was evolved to analyse two antihypertensive drugs, namely, metolazone (MTZ) and valsartan (VST), in pharmaceutical and biological matrices. Both analytes exhibited intrinsic fluorescence activities which were significantly affected by environmental factors such as pH and solvent systems. However, simultaneous determination of MTZ and VST by conventional spectrofluorometry cannot be achieved simply because of the strong overlap between their fluorescence spectra. Thus, a combination of derivative and synchronous spectrofluorometry was conducted to overcome this dilemma. The proposed method relies on measurement of the first-order derivative of synchronous fluorescence intensity of the studied drugs at Δλ = 160 nm using 0.1 M acetic acid as the optimum solvent. The amplitudes of the first derivative synchronous fluorescence spectra of MTZ and VST were recorded at 236.0 nm (zero-crossing point of VST) and at 262.8 nm (zero-crossing point of MTZ) for simultaneous analysis of MTZ and VST, respectively. The fluorescent method was optimized efficiently to get the maximum selectivity and sensitivity by investigating different solvents, different buffer pHs, and different surfactants. The highest sensitivity and selectivity were achieved when 0.1 M acetic acid was used as a solvent. The method showed a linear concentration range of 10.0-100.0 ng mL^-1 and a limit of detection of <3.0 ng mL^-1 for each analyte. Statistical data analysis confirmed that no significant difference between the proposed spectrofluorometric method and the reference methods. The validity of the proposed spectrofluorometric method approved its suitability for quality control work. The proposed spectrofluorometric method was applied to assay the studied drugs in pharmaceutical dosage and in biological matrices with acceptable %recoveries and small RSD values.

Development of hybrid spectrofluorimetric method for simultaneous determination of Valsartan and Sacubitril in LCZ696 tablets

A hybrid Spectrofluorimetric method was developed for the simultaneous determination of binary mixtures, without prior separation steps. It coupled synchronous spectrofluorimetry with derivative ratio mathematical treatment. The method was applied successfully to quantify a new model binary mixture consisting of Valsartan (VAL) and Sacubitril (SAC). This mixture was recently approved by FDA as LCZ696. It added a great value in reducing morbidity and mortality in resistant heart failure (HF) patients. First derivative ratio synchronous fluorescence was measured at 258-295 (peak-to-peak) and 204 nm for VAL and SAC, respectively. ICH guidelines were fulfilled for the method validation. VAL and SAC showed linear responses in the range of 60-200 and 20-200 ng mL^-1, respectively. The proposed method was compared, in details, with the reported ones. Its high accuracy, selectivity, simplicity and affordable cost recommend method application in large-scale routine analysis of LCZ696 tablets. Moreover, reliable application of this new integrated spectrofluorimetric method suggests expansion of its application for various therapeutic combinations and different matrices.

Analysis of various solid samples by synchronous fluorescence spectroscopy and related methods: A review

This critical Review covers the literature reports on analysis of different types of solid samples by the synchronous fluorescence spectroscopy (SFS) and its varieties, which include synchronous phosphorescence spectroscopy and synchronous luminescence spectroscopy, in the three decades (1990-2019). Both the qualitative and quantitative spectroscopic analysis is described for a wide range of specimens. Their physical forms and chemical composition include: a) organic and inorganic analytes pre-concentrated from solution on matrices (beads, membranes, filters, disks, paper), b) natural and synthetic multi-component specimens of complex composition (biological tissues, soil, polymers) and c) inorganic and coordination compounds including porous materials and particularly metal-organic frameworks (MOFs). The comparison with the data obtained by "conventional" optical emission spectroscopy and other analytical techniques (when available) is presented. The specific advantages of the high-resolution varieties of the method, the first- and second-derivative solid-state synchronous fluorescence, luminescence, and phosphorescence spectroscopy are described. An attention is also paid to practical conditions of the typical tests, and the relevant experimental setups. The impetus is on the emerging capabilities of this highly promising method e.g. in-situ monitoring of chemical reactions, in-vivo diagnostics, surface reactions, and detection of the adsorbate. The existing challenges are analyzed, and the unexplored application "niches" to further develop this and the related analytical methods are revealed. 145 references, 9 Tables, 17 Figures and 1 Scheme.

Development of novel response surface methodology-assisted micellar enhanced synchronous spectrofluorimetric method for determination of vandetanib in tablets, human plasma and urine

A highly sensitive and accurate novel response surface methodology (RSM)-assisted micellar enhanced synchronous spectrofluorimetric method was developed and validated for determination of vandetanib (VDB) in tablets, human plasma and urine. The method relied on enhancement of the fluorescence behavior of VDB in polyoxyethylene hydrogenated castor oil 40 (HCO 40) micellar medium and measuring the fluorescence using synchronous scan approach (Δλ = 50 nm). Key factors affecting VDB fluorescence were optimized by RSM using Box-Behnken design. These factors were the type and volume of surfactant and pH of the buffer medium. Under the optimum conditions, the fluorescence-concentration plot was linear over the range 40-600 ng mL^-1; the limits of detection and quantification were 5.22 and 15.82 ng mL^-1, respectively. The suggested method was successfully applied to the analysis of laboratory-prepared tablets, spiked human plasma and urine samples. The results were statistically compared with those acquired by a pre-validated liquid chromatography-tandem mass spectrometric reference method and the results obtained from both methods were found to be in good agreement.

Sensitive spectrofluorimetric methods for determination of ethopabate and amprolium hydrochloride in chicken plasma and their residues in food samples

Two sensitive and selective spectrofluorimetric methods are proposed to determine ethopabate (ETH) and amprolium hydrochloride (AMP). First derivative synchronous spectrofluorimetry determines the natively fluorescent ethopabate at 288 nm in presence of amprolium hydrochloride which is a non fluorescent quaternary compound with average recovery 100.54±0.721 over a concentration range of 0.01-0.8 μg/mL. Limits of detection (LOD) and quantification (LOQ) are 0.002 and 0.007 μg/mL, respectively. The second method is direct synchronous spectrofluorimetry for determining amprolium hydrochloride at 362 nm after a reaction with 5% NaOH and 0.08% potassium ferricyanide that is optimized by a two-level factorial design. This method is linear over a concentration range of 0.01-0.65 μg/mL with average recovery 99.4±1.28. Limits of detection (LOD) and quantification (LOQ) are 0.002 and 0.006 μg/mL, respectively. The proposed methods are found to be valid and applicable for the analysis of ETH and AMP in their veterinary formulation. They are successfully applied to determine the studied drugs in chicken plasma and their residues in chicken muscle, liver, egg and chicken-based baby food product with recoveries in the ranges of 95.71-108.73% and 97.36-111.89% and for ETH and AMP, respectively.