1
|
Evaluation of porous bacterial cellulose produced from foam templating with different additives and its application in 3D cell culture. Int J Biol Macromol 2023; 234:123680. [PMID: 36801225 DOI: 10.1016/j.ijbiomac.2023.123680] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/02/2022] [Revised: 12/22/2022] [Accepted: 02/10/2023] [Indexed: 02/17/2023]
Abstract
Bacterial cellulose (BC) is used in biomedical applications due to its unique material properties such as mechanical strength with a high water-absorbing capacity and biocompatibility. Nevertheless, native BC lacks porosity control which is crucial for regenerative medicine. Hence, developing a simple technique to change the pore sizes of BC has become an important issue. This study combined current foaming BC (FBC) production with incorporation of different additives (avicel, carboxymethylcellulose, and chitosan) to form novel porous additive-altered FBC. Results demonstrated that the FBC samples provided greater reswelling rates (91.57 % ~ 93.67 %) compared to BC samples (44.52 % ~ 67.5 %). Moreover, the FBC samples also showed excellent cell adhesion and proliferation abilities for NIH-3T3 cells. Lastly, FBC allowed cells to penetrate to deep layers for cell adhesion due to its porous structure, providing a competitive scaffold for 3D cell culture in tissue engineering.
Collapse
|
2
|
Nondeterministic multiobjective optimization of 3D printed ceramic tissue scaffolds. J Mech Behav Biomed Mater 2023; 138:105580. [PMID: 36509011 DOI: 10.1016/j.jmbbm.2022.105580] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/23/2022] [Revised: 09/20/2022] [Accepted: 11/16/2022] [Indexed: 11/22/2022]
Abstract
Despite significant advances in the design optimization of bone scaffolds for enhancing their biomechanical properties, the functionality of these synthetic constructs remains suboptimal. One of the main challenges in the structural optimization of bone scaffolds is associated with the large uncertainties caused by the manufacturing process, such as variations in scaffolds' geometric features and constitutive material properties after fabrication. Unfortunately, such non-deterministic issues have not been considered in the existing optimization frameworks, thereby limiting their reliability. To address this challenge, a novel multiobjective robust optimization approach is proposed here such that the effects of uncertainties on the optimized design can be minimized. This study first conducted computational analyses of a parameterized ceramic scaffold model to determine its effective modulus, structural strength, and permeability. Then, surrogate models were constructed to formulate explicit mathematical relationships between the geometrical parameters (design variables) and mechanical and fluidic properties. The Non-Dominated Sorting Genetic Algorithm II (NSGA-II) was adopted to generate the robust Pareto solutions for an optimal set of trade-offs between the competing objective functions while ensuring the effects of the noise parameters to be minimal. Note that the nondeterministic optimization of tissue scaffold presented here is the first of its kind in open literature, which is expected to shed some light on this significant topic of scaffold design and additive manufacturing in a more realistic way.
Collapse
|
3
|
Satisfactory clinical outcomes with autologous matrix-induced chondrogenesis in the treatment of grade IV chondral injuries of the knee. J ISAKOS 2022; 8:86-93. [PMID: 36435431 DOI: 10.1016/j.jisako.2022.11.004] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/25/2022] [Revised: 10/26/2022] [Accepted: 11/15/2022] [Indexed: 11/26/2022]
Abstract
OBJECTIVE The research aims to evaluate short- and medium-term outcomes of patients treated using autologous matrix-induced chondrogenesis (AMIC) with a hyaluronic acid scaffold (Hyalofast, Anika Therapeutics, MA, USA) in grade IV chondral lesions according to the Outerbridge classification in the knee. METHODS This is a multicentre, non-randomized, retrospective study conducted between 2017 and 2022. To determine the clinical outcome of the patients, the follow-up was done with the subjective International Knee Documentation Committee (IKDC) score, pre-surgery, and with a follow-up at 12, 24, and 32 months. RESULTS Fifty patients (28 female) with a mean age of 45.9 ± 12.7 years were recruited. The mean size of the lesion was 3.5 cm2, and the injuries located in the patella (30%) and trochlear groove (24%) were the most frequent. The total IKDC clinical score significantly increased from baseline to the 32 months of follow-up with a mean difference of 36.4 (95% CI, 29.1-43.7, p < 0.001). Besides, there was a statistically significant improvement in all categories of the IKDC (symptoms, sports activities, function, and activity of daily living) compared between pre-surgery and 24 and 32 months of follow-up. The patients younger than 45 years presented better clinical outcomes than older ones with a difference between medians of 10.40 (95% CI, 1.10-11.50, p = 0.0247), and a negative correlation was found between the 32-month IKDC score and the age. In addition, no statistically significant difference was found when comparing the last results of the IKDC between patients with and without associated surgical procedures or between patients with single and several lesions, neither nor between men and women. The level of satisfaction with the procedure of all the patients, on a score of 1-10, was on average 8 ± 1.5. CONCLUSION Results of this study indicate that patients who underwent the AMIC procedure with hyaluronic acid scaffold for the treatment of grade IV chondral lesions in the knee presented satisfactory results throughout the follow-up. LEVEL OF EVIDENCE Level IV.
Collapse
|
4
|
Cocktail Formula and Application Prospects for Oral and Maxillofacial Organoids. Tissue Eng Regen Med 2022; 19:913-925. [PMID: 35612711 DOI: 10.1007/s13770-022-00455-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/02/2022] [Revised: 03/18/2022] [Accepted: 03/22/2022] [Indexed: 11/24/2022] Open
Abstract
Oral and maxillofacial organoids (OMOs), tiny tissues and organs derived from stem cells cultured through 3-d cell culture models, can fully summarize the cell tissue structure, physiological functions and biological characteristics of the source tissues in the body. OMOs are applied in areas such as disease modelling, developmental and regenerative medicine, drug screening, personalized treatment, etc. Although the construction of organoids in various parts of the oral and maxillofacial (OM) region has achieved considerable success, the existing cocktail formulae (construction strategies) are not widely applicable for tissues of various sources due to factors including the heterogeneity of the source tissues and the dependence on laboratory technology. Most of their formulae are based on growth factor niches containing expensive recombinant proteins with their efficiency remaining to be improved. In view of this, the cocktail formulae of various parts of the OM organs are reviewed with further discussion of the application and prospects for those OMOs to find some affordable cocktail formula with strong operability and high repeatability for various maxillofacial organs. The results may help improve the efficiency of organoid construction in the laboratory and accelerate the pace of the clinical use of organoid technology.
Collapse
|
5
|
Transformation of electrospun Keratin/PVA nanofiber membranes into multilayered 3D Scaffolds: Physiochemical studies and corneal implant applications. Int J Pharm 2021; 610:121228. [PMID: 34715260 DOI: 10.1016/j.ijpharm.2021.121228] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/18/2021] [Revised: 10/19/2021] [Accepted: 10/20/2021] [Indexed: 11/23/2022]
Abstract
In this study, we engineered an electrospun keratin/polyvinyl alcohol (PVA) nanofiber membrane with a three-dimensional (3D) fiber network. Both keratin and PVA are known as biocompatible materials, and the 3D assembly of these two led to a transparent membrane with superior mechanical properties. The as-prepared three-dimensionally assembled keratin/PVA nanofiber (3D keratin/PVA NFs) membrane was characterized by state-of-the-art techniques and used as a corneal implant in rabbit eyes. The transparency, mechanical properties, and biocompatibility of the electrospun keratin/PVA NFs were highly enhanced after 3D modification which is mainly attributed to its unique three-dimensional morphology. The performance of 3D keratin/PVA NFs membrane was compared with horse amniotic membrane (AM), and the results obtained from the clinical and histological evaluations showed that it could be considered as an alternative material to the AM. Furthermore, this study provides an emerging approach for converting a two-dimensional electrospun nanofiber membrane to three-dimensional fiber networks that resemble the structure of the extracellular matrix (ECM).
Collapse
|
6
|
Findings from the patch augmented rotator cuff surgery (PARCS) feasibility study. Pilot Feasibility Stud 2021; 7:163. [PMID: 34416915 PMCID: PMC8377837 DOI: 10.1186/s40814-021-00899-9] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/11/2021] [Accepted: 08/06/2021] [Indexed: 01/08/2023] Open
Abstract
Background A rotator cuff tear is a common disabling shoulder problem. Symptoms include pain, weakness, lack of mobility and sleep disturbance. Many patients require surgery to repair the tear; however, there is a high failure rate. There is a pressing need to improve the outcome of rotator cuff surgery. The use of patch augmentation to provide support to the healing process and improve patient outcomes holds new promise. Different materials (e.g. human/animal skin or intestine tissue, and completely synthetic materials) and processes (e.g. woven or a mesh) have been used to produce patches. However, clinical evidence on their use is limited. The patch augmented rotator cuff surgery (PARCS) feasibility study aimed to determine the design of a definitive randomised controlled trial (RCT) assessing the effectiveness and cost-effectiveness of a patch to augment surgical repair of the rotator cuff that is both acceptable to stakeholders and feasible. Methods A mixed methods feasibility study of conducing a subsequent RCT. The project involved six stages: a systematic review of clinical evidence; a survey of the British Elbow and Shoulder Society’s (BESS) surgical membership; a survey of surgeon trialists; focus groups and interviews with stakeholders; a two-round Delphi study administered via online questionnaires and a 2-day consensus meeting. Results The BESS surgeons’ survey identified a variety of patches in use (105 (21%) responses received). Twenty-four surgeons (77%) completed the trialist survey relating to trial design. Four focus groups were conducted involving 24 stakeholders. Twenty-nine (67% of invited) individuals took part in the Delphi. Differing views were held on a number of aspects including the appropriate patient population for trial participation. Agreement on the key research questions and the outline of two potential RCTs were achieved through the Delphi study and the consensus meeting. Conclusions Randomised comparisons of on-lay patch use for completed rotator cuff repairs, and bridging patch use for partial rotator cuff repairs were identified as areas for further research. The value of an observational study to assess safety concerns of patch use was also highlighted. The main limitation was that the findings were influenced by the participants, who might not necessarily reflect all stakeholders.
Collapse
|
7
|
Silk fibroin nanocomposites as tissue engineering scaffolds - A systematic review. Biomed Pharmacother 2021; 141:111924. [PMID: 34328093 DOI: 10.1016/j.biopha.2021.111924] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/11/2021] [Revised: 07/06/2021] [Accepted: 07/12/2021] [Indexed: 12/13/2022] Open
Abstract
Silk fibroin is a protein with intrinsic characteristics that make it a good candidate as a scaffold for tissue engineering. Recent works have enhanced its benefits by adding inorganic phases that interact with silk fibroin in different ways. A systematic review was performed in four databases to study the physicochemical and biological performance of silk fibroin nanocomposites. In the last decade, only 51 articles contained either in vitro cell culture models or in vivo tests. The analysis of such works resulted in their classification into the following scaffold types: particles, mats and textiles, films, hydrogels, sponge-like structures, and mixed conformations. From the physicochemical perspective, the inorganic phase imbued in silk fibroin nanocomposites resulted in better stability and mechanical performance. This review revealed that the inorganic phase may be associated with specific biological responses, such as neovascularisation, cell differentiation, cell proliferation, and antimicrobial and immunomodulatory activity. The study of nanocomposites as tissue engineering scaffolds is a highly active area mostly focused on bone and cartilage regeneration with promising results. Nonetheless, there are still many challenges related to their application in other tissues, a better understanding of the interaction between the inorganic and organic phases, and the associated biological response.
Collapse
|
8
|
Freeze-dried bovine amniotic membrane as a cell delivery scaffold in a porcine model of radiation-induced chronic wounds. Arch Plast Surg 2021; 48:448-456. [PMID: 34352959 PMCID: PMC8342254 DOI: 10.5999/aps.2020.00997] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/03/2020] [Accepted: 04/28/2021] [Indexed: 11/23/2022] Open
Abstract
Background Locoregional stem cell delivery is very important for increasing the efficiency of cell therapy. Amnisite BA (Amnisite) is a freeze-dried amniotic membrane harvested from bovine placenta. The objective of this study was to investigate the retention of cells of the stromal vascular fraction (SVF) on Amnisite and to determine the effects of cell-loaded Amnisite in a porcine radiation-induced chronic wound model. Methods Initially, experiments were conducted to find the most suitable hydration and incubation conditions for the attachment of SVF cells extracted from pig fat to Amnisite. Before seeding, SVFs were labeled with PKH67. The SVF cell-loaded Amnisite (group S), Amnisite only (group A), and polyurethane foam (group C) were applied to treat radiation-induced chronic wounds in a porcine model. Biopsy was performed at 10, 14, and 21 days post-operation for histological analysis. Results Retaining the SVF on Amnisite required 30 minutes for hydration and 1 hour for incubation. A PKH67 fluorescence study showed that Amnisite successfully delivered the SVF to the wounds. In histological analysis, group S showed increased re-epithelialization and revascularization with decreased inflammation at 10 days post-operation. Conclusions SVFs had acceptable adherence on hydrated Amnisite, with successful cell delivery to a radiation-induced chronic wound model.
Collapse
|
9
|
Which experimental models and explorations to use in regenerative endodontics? A comprehensive review on standard practices. Mol Biol Rep 2021; 48:3799-3812. [PMID: 33761086 DOI: 10.1007/s11033-021-06299-9] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/22/2020] [Accepted: 03/18/2021] [Indexed: 01/09/2023]
Abstract
Since the discovery of dental pulp stem cells, a lot of teams have expressed an interest in dental pulp regeneration. Many approaches, experimental models and biological explorations have been developed, each including the use of stem cells and scaffolds with the final goal being clinical application in humans. In this review, the authors' objective was to compare the experimental models and strategies used for the development of biomaterials for tissue engineering of dental pulp with stem cells. Electronic queries were conducted on PubMed using the following terms: pulp regeneration, scaffold, stem cells, tissue engineering and biomaterial. The extracted data included the following information: the strategy envisaged, the type of stem cells, the experimental models, the exploration or analysis methods, the cytotoxicity or viability or proliferation cellular tests, the tests of scaffold antibacterial properties and take into account the vascularization of the regenerated dental pulp. From the 71 selected articles, 59% focused on the "cell-transplantation" strategy, 82% used in vitro experimentation, 58% in vivo animal models and only one described an in vivo in situ human clinical study. 87% used dental pulp stem cells. A majority of the studies reported histology (75%) and immunohistochemistry explorations (66%). 73% mentioned the use of cytotoxicity, proliferation or viability tests. 48% took vascularization into account but only 6% studied the antibacterial properties of the scaffolds. This article gives an overview of the methods used to regenerate dental pulp from stem cells and should help researchers create the best development strategies for research in this field.
Collapse
|
10
|
Current Challenges and Solutions to Tissue Engineering of Large-scale Cardiac Constructs. Curr Cardiol Rep 2021; 23:47. [PMID: 33733317 DOI: 10.1007/s11886-021-01474-7] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Accepted: 02/11/2021] [Indexed: 01/06/2023]
Abstract
PURPOSE OF REVIEW Large-scale tissue engineering of cardiac constructs is a rapidly advancing field; however, there are several barriers still associated with the creation and clinical application of large-scale engineered cardiac tissues. We provide an overview of the current challenges and recently (within the last 5 years) described promising solutions to overcoming said challenges. RECENT FINDINGS The five major criteria yet to be met for clinical application of engineered cardiac tissues are successful electrochemical/mechanical cell coupling, efficient maturation of cardiomyocytes, functional vascularization of large tissues, balancing appropriate immune response, and large-scale generation of constructs. Promising solutions include the use of carbon/graphene in conjunction with existing scaffold designs, utilization of biological hormones, 3D bioprinting, and gene editing. While some of the described barriers to generation of large-scale cardiac tissue have seen encouraging advancements, there is no solution that yet achieves all 5 described criteria. It is vital then to consider a combination of techniques to achieve the optimal construct. Critically, following the demonstration of a viable construct, there remain important considerations to address associated with good manufacturing practices and establishing a standard for clinical trials.
Collapse
|
11
|
A time-dependent mechanobiology-based topology optimization to enhance bone growth in tissue scaffolds. J Biomech 2021; 117:110233. [PMID: 33601086 DOI: 10.1016/j.jbiomech.2021.110233] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/19/2020] [Revised: 10/05/2020] [Accepted: 01/03/2021] [Indexed: 12/21/2022]
Abstract
Scaffold-based bone tissue engineering has been extensively developed as a potential means to treatment of large bone defects. To enhance the biomechanical performance of porous tissue scaffolds, computational design techniques have gained growing popularity attributable to their compelling efficiency and strong predictive features compared with time-consuming trial-and-error experiments. Nevertheless, the mechanical stimulus necessary for bone regeneration, which characterizes dynamic nature due to continuous variation in the bone-scaffold construct system as a result of bone-ingrowth and scaffold biodegradation, is often neglected. Thus, this study proposes a time-dependent mechanobiology-based topology optimization framework for design of tissue scaffolds, thereby developing an ongoing favorable microenvironment and ensuring a long-term outcome for bone regeneration. For the first time, a level-set based topology optimization algorithm and a time-dependent shape derivative are developed to optimize the scaffold architecture. In this study, a large bone defect in a simulated 2D femur model and a partial defect in a 3D femur model are considered to demonstrate the effectiveness of the proposed design method. The results are compared with those obtained from stiffness-based topology optimization, time-independent design and typical scaffold constructs, showing significant advantages in continuing bone ingrowth outcomes.
Collapse
|
12
|
Modeling the mechanics of fibrous-porous scaffolds for skeletal muscle regeneration. Med Biol Eng Comput 2021; 59:131-142. [PMID: 33386591 DOI: 10.1007/s11517-020-02288-5] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/23/2020] [Accepted: 11/11/2020] [Indexed: 10/22/2022]
Abstract
The scaffolds for skeletal muscle regeneration are designed to mimic the structure, stiffness, and strains applied to the muscle under physiologic conditions. The external strains are also used to stimulate myogenesis of the (stem) cells seeded on the scaffold. The time- and location-dependent mechanics inside the scaffold determine the microenvironment for the seeded cells. Here, fibrous-porous cylindrical scaffolds under the action of external cyclic strains are considered. The scaffold mechanics are described as two-phase (poroelastic) where the solid phase is associated with the fibers and the fluid phase is associated with the liquid-containing pores. In response to an applied cyclic strain, pressure oscillates and fluid moves radially toward and away from the axis of the scaffold. We compute the directions and magnitudes of the radial gradients of the poroelastic characteristics (solid-phase displacement, strain, and velocity; fluid-phase pressure and velocity; relative fluid-solid-phase velocity) determined by the boundary conditions and geometry of the scaffold. Several kinds of the external cyclic strain are analyzed and the resulting poroelastic functions are found. The poroelastic characteristics are obtained in closed form which is convenient for further consideration of myogenesis of the seeded cells and ultimately for the design of the scaffolds for skeletal muscle regeneration. Graphical abstract.
Collapse
|
13
|
Preclinical evaluation of a 3D-printed hydroxyapatite/poly(lactic-co-glycolic acid) scaffold for ridge augmentation. J Formos Med Assoc 2020; 120:1100-1107. [PMID: 33191094 DOI: 10.1016/j.jfma.2020.10.022] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/12/2020] [Revised: 10/16/2020] [Accepted: 10/26/2020] [Indexed: 02/07/2023] Open
Abstract
BACKGROUND/PURPOSE Supracrestal ridge augmentation (SRA) is a major challenge for clinicians. This study investigated the efficacy of a 3D-printed (3DP) hydroxyapatite/poly(lactic-co-glycolic acid) (HA/PLGA) scaffold as a potential biologic for SRA. METHODS Scaffolds that were 5 mm in diameter and 2.5-mm thick with a 1.2-mm diameter through-and-through central hole composed of 90% HA and 10% PLGA were printed using an extrusion-based bioprinter. The HA/PLGA scaffold was fixed with a 1.2-mm titanium mini-implant on the buccal surface of rat mandible (Ti-HPS), and the outcome of SRA were compared with sites treated with a titanium mini-implant alone (control) and a titanium mini-implant covered with deproteinized bovine bone-derived matrix (Ti-DBBM) at 4 and 8 weeks by microcomputed tomography (micro-CT), back-scattered SEM, and histology assessments. RESULTS The HA/PLGA scaffolds were 2.486 ± 0.082 mm thick with an outer diameter of 4.543 ± 0.057 mm and an inner diameter of 1.089 ± 0.045 mm, and the pore dimensions were 0.48-0.52 mm. There was significantly more mineralized tissue in the Ti-DBBM and Ti-HPS groups than in the control group at both time points. Newly formed bone (NB) was well-integrated with the DBBM and HA/PLGA scaffolds. The framework of the 3DP-HA/PLGA scaffold remained in place, and NB-implant contact (NBIC) was advanced to the middle level in the Ti-HPS group until 8 weeks, whereas dispersion of DBBM with a lower level NBIC was noted in the Ti-DBBM group at both time points. CONCLUSION The 3DP HA/PLGA scaffold maintains supracrestal space and demonstrates osteoconductivity to facilitate SRA.
Collapse
|
14
|
HuBiogel incorporated fibro-porous hybrid nanomatrix graft for vascular tissue interfaces. MATERIALS TODAY. CHEMISTRY 2020; 17:100323. [PMID: 33015427 PMCID: PMC7526799 DOI: 10.1016/j.mtchem.2020.100323] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/16/2023]
Abstract
Native extracellular matrix (ECM) possesses the biochemical cues to promote cell survival. However, decellularized, the ECM loses its cell supporting mechanical integrity. We report, here, a novel biohybrid vascular graft of polycaprolactone (PCL), poliglecaprone (PGC) incorporated with human biomatrix as functional materials for vascular tissue interfacing by electrospinning, thus harnessing the biochemical cues from the ECM and the mechanical integrity of the polymer blends. The fabricated fibro-porous tubular small diameter graft (i.d. = 4 mm) from polymer blend was coated with a cocktail of collagenous matrix derived from human placenta called HuBiogel™. The compositional, morphological, and mechanical properties of graft were measured and compared with a non-coated tubular PCL/PGC graft using Fourier Transform infrared spectroscopy (FTIR), x-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). BCA assay was used to calculate the protein content and coating-uniformity throughout the hybrid graft. Mechanical properties such as tensile strength (1.6 MPa), Young's modulus (2.4 MPa), burst pressure (>1900 mmHg), and suture retention strength (2.3 N) of hybrid graft were found to be comparable to native blood vessels. Protein coating has improved the hydrophilicity and the biocompatibility (cell viability and cell-attachment) enhanced with human umbilical vein endothelial cells (HUVECs) seeded in vitro onto the lumen layer of the graft over two weeks. The overall results promise this new biohybrid graft to be a potential candidate for vascular tissue interface and regeneration.
Collapse
|
15
|
Effect of cross-linking and hydration on microscale flat punch indentation contact to collagen-hyaluronic acid films in the viscoelastic limit. Acta Biomater 2020; 111:279-289. [PMID: 32417264 DOI: 10.1016/j.actbio.2020.04.043] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/27/2019] [Revised: 04/21/2020] [Accepted: 04/23/2020] [Indexed: 11/23/2022]
Abstract
The properties of the extracellular matrix (ECM) have profound impact upon cell behaviour. As an abundant protein in mammals, collagen is a desirable base material to engineer an ECM tissue scaffold, but its structural weakness generally requires molecular crosslinking or incorporation of additional ECM-based macromolecules such as glycosaminoglycans. We have performed microscopic indentation to test collagen films under dry and aqueous conditions prepared with different levels of physical and chemical crosslinking. Our technique isolates intrinsic properties of the poro-viscoelastic matrix in a regime minimizing the influence of drainage hydrodynamics and allows direct measurement of the effect of hydrating a specific sample. A doubling of the effective stress-strain stiffness under crosslinking could be directly correlated to structural changes in X-ray diffraction spectra, while electron microscopy revealed possible fibril bridging mechanisms explaining observed toughness. Overall, an intrinsic viscoelastic stress-strain response of collagen under various conditions of cross-linking was observed for both dry and wet conditions, with the latter most affected by indentation rate. Under creep testing, a three order of magnitude increase in dynamic compliance and factor three reduction in relaxation time was found going from the dry to hydrated state. When fitted to a simple viscoelastic model, crosslinking showed a tendency to decrease relaxation time in both states, but reduced dynamic compliance only in the hydrated case. This suggests a reduced role of virtual crosslinks under hydration. This is the first study reporting consistent mechanical testing of dry and hydrated ECM-derived biomaterials, accessing the intrinsic material mechanics under in vivo-like conditions. STATEMENT OF SIGNIFICANCE: This manuscript presents new insights into the effect of crosslinking on mechanical properties of dry and hydrated collagen intended for tissue scaffolding applications. A novel microscopic indentation technique allowed testing of the poro-viscoelastic matrix isolated in a regime minimizing the influence of drainage hydrodynamics, so direct comparison of the effect of hydration on the intrinsic material behaviour to could be made. A variety of experimental techniques including X-ray diffraction, infrared spectroscopy, and scanning electron and atomic force microscopy were used to augment the mechanical testing. The results of creep testing were numerically analysed using a four-component viscoelastic model. This is the first mechanical testing of dry and hydrated ECM-derived biomaterials, accessing the intrinsic material mechanics under in vivo-like conditions.
Collapse
|
16
|
Cross-linked cellulose nanocrystal aerogels as viable bone tissue scaffolds. Acta Biomater 2019; 87:152-165. [PMID: 30710708 DOI: 10.1016/j.actbio.2019.01.049] [Citation(s) in RCA: 80] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/31/2018] [Revised: 01/21/2019] [Accepted: 01/24/2019] [Indexed: 12/13/2022]
Abstract
Chemically cross-linked cellulose nanocrystal (CNC) aerogels possess many properties beneficial for bone tissue scaffolding applications. CNCs were extracted using sulfuric acid or phosphoric acid, to produce CNCs with sulfate and phosphate half-ester surface groups, respectively. Hydrazone cross-linked aerogels fabricated from the two types of CNCs were investigated using scanning electron microscopy, X-ray micro-computed tomography, X-ray photoelectron spectroscopy, nitrogen sorption isotherms, and compression testing. CNC aerogels were evaluatedin vitrowith osteoblast-like Saos-2 cells and showed an increase in cell metabolism up to 7 days while alkaline phosphatase assays revealed that cells maintained their phenotype. All aerogels demonstrated hydroxyapatite growth over 14 days while submerged in simulated body fluid solution with a 0.1 M CaCl2 pre-treatment. Sulfated CNC aerogels slightly outperformed phosphated CNC aerogels in terms of compressive strength and long-term stability in liquid environments, and were implanted into the calvarian bone of adult male Long Evans rats. Compared to controls at 3 and 12 week time points, sulfated CNC aerogels showed increased bone volume fraction of 33% and 50%, respectively, compared to controls, and evidence of osteoconductivity. These results demonstrate that cross-linked CNC aerogels are flexible, porous and effectively facilitate bone growth after they are implanted in bone defects. STATEMENT OF SIGNIFICANCE: Due to the potential complications associated with autografts, there is a need for synthetic bone tissue scaffolds. Here, we report a new naturally-based aerogel material for bone regeneration made solely from chemically cross-linked cellulose nanocrystals (CNC). These highly porous CNC aerogels were shown to promote the proliferation of bone-like cells and support the growth of hydroxyapatite on their surface in vitro. The first in vivo study on these materials was conducted in rats and showed their osteconductive properties and an increase in bone volume up to 50% compared to sham sites. This study demonstrates the potential of using functionalized cellulose nanocrystals as the basis for aerogel scaffolds for bone tissue engineering.
Collapse
|
17
|
Patch-augmented rotator cuff surgery (PARCS) study-protocol for a feasibility study. Pilot Feasibility Stud 2018; 4:188. [PMID: 30598834 PMCID: PMC6302398 DOI: 10.1186/s40814-018-0380-7] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/17/2018] [Accepted: 12/06/2018] [Indexed: 12/20/2022] Open
Abstract
BACKGROUND A rotator cuff tear is a common disabling shoulder problem. Symptoms include pain, weakness, lack of shoulder mobility and sleep disturbance. Many patients require surgery to repair the tear; however, there is a high failure rate. There is a pressing need to improve the outcome of rotator cuff surgery and the use of patch augmentation to provide support to the healing process and improve patient outcomes holds new promise. Patches have been made using different materials (e.g. human/animal skin or intestine tissue, and completely synthetic materials) and processes (e.g. woven or a mesh). However, clinical evidence on their use is limited. The aim of the patch-augmented rotator cuff surgery (PARCS) feasibility study is to determine, using a mixed method approach, the design of a definitive randomised trial assessing the effectiveness and cost-effectiveness of a patch to augment surgical repair of the rotator cuff that is both acceptable to stakeholders and feasible. METHODS The objectives of this six-stage mixed methods feasibility study are to determine current practice, evidence and views about patch use; achieve consensus on the design of a randomised trial to evaluate patch-augmented rotator cuff surgery; and assess the acceptability and feasibility of the proposed design. The six stages will involve a systematic review of clinical evidence, two surveys of surgeons, focus groups and interviews with stakeholders, a Delphi study and a consensus meeting. The various stakeholders (including patients, surgeons, and representatives from industry, the NHS and regulatory bodies) will be involved across the six stages. DISCUSSION The PARCS feasibility study will inform the feasibility and acceptability of a randomised trial of the effectiveness and cost-effectiveness of a patch-augmented rotator cuff surgery. Consensus opinion on the basic design of a randomised trial will be sought. TRIAL REGISTRATION Not applicable.
Collapse
|
18
|
Systematic review of the surgical management of rotator cuff repair with an augmentative patch: a feasibility study protocol. Syst Rev 2018; 7:187. [PMID: 30424809 PMCID: PMC6234662 DOI: 10.1186/s13643-018-0851-1] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 11/24/2017] [Accepted: 10/22/2018] [Indexed: 12/18/2022] Open
Abstract
BACKGROUND Shoulder pain is a common problem in the general population and is responsible for prolonged periods of disability, loss of productivity, absence from work and inability to carry out household activities. Rotator cuff problems account for up to 70% of shoulder pain problems and are the third most prevalent musculoskeletal disorder after those occurring in the lower back and neck. Rotator cuff surgery has high failure rates (25-50% within 12 months), and as a result, there is a pressing need to improve the outcome of rotator cuff surgery. Patch augmented surgery for rotator cuff repairs has recently been developed and is increasingly being used within the UK National Health Service. Patch augmented surgery could lead to a dramatic improvement in patient and surgical outcomes, but its clinical and cost effectiveness needs rigorous evaluation. The existing evidence on the use of patches may be at risk of bias as currently only a small number of single-centre comparative studies appear to have been carried out. Additionally, it is unclear for which patches a clinical study (comparative and non-comparative) has been conducted. This paper outlines the protocol for a systematic review intended to summarise the best available clinical evidence and will indicate what further research is required. METHODS Electronic databases (Medline, Embase and Cochrane) will be systematically searched between April 2006 and the present day for relevant publications using a specified search strategy, which can be adapted for the use in multiple electronic databases, and inclusion criteria. Screening of both titles and abstracts will be done by two independent reviewers with any discrepancies resolved by a third independent reviewer. Data extraction will include information regarding the type of participants, type of intervention and outcomes including but not limited to shoulder-specific function and pain scores, patch-related adverse events and type of study. The results will be summarised in a narrative review where qualitative analysis is not possible. DISCUSSION This review aims to collate the current evidence base regarding the use of patches to augment rotator cuff repair. The results of this review will help to develop, using consensus methods, the design of a definitive randomised trial assessing the clinical and cost-effectiveness of a patch to augment surgical repair of the rotator cuff that is both acceptable to stakeholders and is feasible. SYSTEMATIC REVIEW REGISTRATION CRD42017057908.
Collapse
|
19
|
A brief review of extrusion-based tissue scaffold bio-printing. Biotechnol J 2017; 12. [PMID: 28544779 DOI: 10.1002/biot.201600671] [Citation(s) in RCA: 105] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/10/2016] [Revised: 04/17/2017] [Accepted: 04/19/2017] [Indexed: 01/17/2023]
Abstract
Extrusion-based bio-printing has great potential as a technique for manipulating biomaterials and living cells to create three-dimensional (3D) scaffolds for damaged tissue repair and function restoration. Over the last two decades, advances in both engineering techniques and life sciences have evolved extrusion-based bio-printing from a simple technique to one able to create diverse tissue scaffolds from a wide range of biomaterials and cell types. However, the complexities associated with synthesis of materials for bio-printing and manipulation of multiple materials and cells in bio-printing pose many challenges for scaffold fabrication. This paper presents an overview of extrusion-based bio-printing for scaffold fabrication, focusing on the prior-printing considerations (such as scaffold design and materials/cell synthesis), working principles, comparison to other techniques, and to-date achievements. This paper also briefly reviews the recent development of strategies with regard to hydrogel synthesis, multi-materials/cells manipulation, and process-induced cell damage in extrusion-based bio-printing. The key issue and challenges for extrusion-based bio-printing are also identified and discussed along with recommendations for future, aimed at developing novel biomaterials and bio-printing systems, creating patterned vascular networks within scaffolds, and preserving the cell viability and functions in scaffold bio-printing. The address of these challenges will significantly enhance the capability of extrusion-based bio-printing.
Collapse
|
20
|
Hydrogel and Platelet-Rich Plasma Combined Treatment to Accelerate Wound Healing in a Nude Mouse Model. Arch Plast Surg 2017; 44:194-201. [PMID: 28573093 PMCID: PMC5447528 DOI: 10.5999/aps.2017.44.3.194] [Citation(s) in RCA: 26] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/12/2016] [Revised: 04/26/2017] [Accepted: 04/28/2017] [Indexed: 12/24/2022] Open
Abstract
Background Platelet-rich plasma (PRP) contains high concentrations of growth factors involved in wound healing. Hydrogel is a 3-dimensional, hydrophilic, high-molecular, reticular substance generally used as a dressing formulation to accelerate wound healing, and also used as a bio-applicable scaffold or vehicle. This study aimed to investigate the effects of PRP and hydrogel on wound healing, in combination and separately, in an animal wound model. Methods A total of 64 wounds, with 2 wounds on the back of each nude mouse, were classified into 4 groups: a control group, a hydrogel-only group, a PRP-only group, and a combined-treatment group. All mice were assessed for changes in wound size and photographed on scheduled dates. The number of blood vessels was measured in all specimens. Immunohistochemical staining was used for the analysis of vascular endothelial growth factor (VEGF) expression. Results Differences in the decrease and change in wound size in the combined-treatment group were more significant than those in the single-treatment groups on days 3, 5, 7, and 10. Analysis of the number of blood vessels through histological examination showed a pattern of increase over time that occurred in all groups, but the combined-treatment group exhibited the greatest increase on days 7 and 14. Immunohistochemical staining showed that VEGF expression in the combined-treatment group exhibited its highest value on day 7. Conclusions This experiment demonstrated improved wound healing using a PRP–hydrogel combined treatment compared to either treatment individually, resulting in a decrease in wound size and a shortening of the healing period.
Collapse
|
21
|
Abstract
Background Since the treatments of long tracheal lesions are associated with some limitations, tissue engineered trachea is considered as an alternative option. This study aimed at preparing a composite scaffold, based on natural and synthetic materials for tracheal tissue engineering. Methods Nine chitosan silk-based scaffolds were fabricated using three freezing rates (0.5, 1, and 2°C/min) and glutaraldehyde (GA) concentrations (0, 0.4, and 0.8 wt%). Samples were characterized, and scaffolds having mechanical properties compatible with those of human trachea and proper biodegradability were selected for chondrocyte cell seeding and subsequent biological assessments. Results The pore sizes were highly influenced by the freezing rate and varied from 135.3×372.1 to 37.8×83.4 µm. Swelling and biodegradability behaviors were more affected by GA rather than freezing rate. Tensile strength raised from 120 kPa to 350 kPa by an increment of freezing rate and GA concentration. In addition, marked stiffening was demonstrated by increasing elastic modulus from 1.5 MPa to 12.2 MPa. Samples having 1 and 2°C/min of freezing rate and 0.8 wt% GA concentration made a non-toxic, porous structure with tensile strength and elastic modulus in the range of human trachea, facilitating the chondrocyte proliferation. The results of 21-day cell culture indicated that glycosaminoglycans content was significantly higher for the rate of 2°C/min (12.04 µg/min) rather than the other (9.6 µg/min). Conclusion A homogenous porous structure was created by freeze drying. This allows the fabrication of a chitosan silk scaffold cross-linked by GA for cartilage tissue regeneration with application in tracheal regeneration.
Collapse
|
22
|
Meniscal Transplants and Scaffolds: A Systematic Review of the Literature. Knee Surg Relat Res 2017; 29:3-10. [PMID: 28231642 PMCID: PMC5336368 DOI: 10.5792/ksrr.16.059] [Citation(s) in RCA: 38] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 10/01/2016] [Revised: 01/16/2017] [Accepted: 01/17/2017] [Indexed: 02/06/2023] Open
Abstract
The reported incidence of meniscal tears is approximately 61 per 100,000. In instances where preservation of the native meniscus is no longer a feasible option, meniscal allograft transplantation (MAT) and implants or scaffolds may be considered. The goal of this review was to compare the success and failure rates of two techniques, MAT and meniscal scaffolds, and make an inference which treatment is more preferable at the present time and future. Studies that met inclusion criteria were assessed for technique used, type of transplant used, number of procedures included in the study, mean age of patients, mean follow-up time, number of failures, failure rate, and reported reoperation rate. Fifteen studies for the MAT group and 7 studies for the meniscal scaffold group were identified. In this selection of studies, the average failure rate in the MAT group was 18.7% and average reoperation rate was 31.3%. The average failure rate in the meniscal scaffold group was 5.6%, and average reoperation rate was 6.9%. It appears that although MAT is associated with high reoperation and failure rates, the limited number of studies on both MAT and scaffolds and mainly short-term results of scaffold studies make it difficult to make an objective comparison.
Collapse
|
23
|
Abstract
Patients with laryngeal disorders may have severe morbidity relating to swallowing, vocalization, and respiratory function, for which conventional therapies are suboptimal. A tissue‐engineered approach would aim to restore the vocal folds and maintain respiratory function while limiting the extent of scarring in the regenerated tissue. Under Good Laboratory Practice conditions, we decellularized porcine larynges, using detergents and enzymes under negative pressure to produce an acellular scaffold comprising cartilage, muscle, and mucosa. To assess safety and functionality before clinical trials, a decellularized hemilarynx seeded with human bone marrow‐derived mesenchymal stem cells and a tissue‐engineered oral mucosal sheet was implanted orthotopically into six pigs. The seeded grafts were left in situ for 6 months and assessed using computed tomography imaging, bronchoscopy, and mucosal brushings, together with vocal recording and histological analysis on explantation. The graft caused no adverse respiratory function, nor did it impact swallowing or vocalization. Rudimentary vocal folds covered by contiguous epithelium were easily identifiable. In conclusion, the proposed tissue‐engineered approach represents a viable alternative treatment for laryngeal defects. Stem Cells Translational Medicine2017;6:677–687
Collapse
|
24
|
Influence of mechanical properties of alginate-based substrates on the performance of Schwann cells in culture. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION 2016; 27:898-915. [PMID: 27012482 DOI: 10.1080/09205063.2016.1170415] [Citation(s) in RCA: 54] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
Abstract
In tissue engineering, artificial tissue scaffolds containing living cells have been studied for tissue repair and regeneration. Notably, the performance of these encapsulated-in-scaffolds cells in terms of cell viability, proliferation, and expression of function during and after the scaffold fabrication process, has not been well documented because of the influence of mechanical, chemical, and physical properties of the scaffold substrate materials. This paper presents our study on the influence of mechanical properties of alginate-based substrates on the performance of Schwann cells, which are the major glial cells of peripheral nervous system. Given the fact that alginate polysaccharide hydrogel has poor cell adhesion properties, in this study, we examined several types of cell-adhesion supplements and found that alginate covalently modified with RGD peptide provided improved cell proliferation and adhesion. We prepared alginate-based substrates for cell culture using varying alginate concentrations for altering their mechanical properties, which were confirmed by compression testing. Then, we examined the viability, proliferation, morphology, and expression of the extracellular matrix protein laminin of Schwann cells that were seeded on the surface of alginate-based substrates (or 2D culture) or encapsulated within alginate-based substrates (3D cultures), and correlated the examined cell performance to the alginate concentration (or mechanical properties) of hydrogel substrates. Our findings suggest that covalent attachment of RGD peptide can improve the success of Schwann cell encapsulation within alginate-based scaffolds, and provide guidance for regulating the mechanical properties of alginate-based scaffolds containing Schwann cells for applications in peripheral nervous system regeneration and repair.
Collapse
|
25
|
Characterization of tissue scaffolds for time-dependent biotransport criteria - a novel computational procedure. Comput Methods Biomech Biomed Engin 2015; 19:1210-24. [PMID: 26718135 DOI: 10.1080/10255842.2015.1124268] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
Abstract
This study aims to establish a new computational framework that allows modeling transient oxygen diffusion in tissue scaffolds more efficiently. It has been well known that the survival of cells strongly relies on continuous oxygen/nutrient supply and metabolite removal. With optimal design in scaffold architecture, its ability to sustain long distance oxygen supply could be improved considerably. In this study, finite element based homogenization procedure is first used to characterize the initial effective biotransport properties in silico. These initial properties are proper indicators to prediction of the on-going performance of tissue scaffolds over time. The transient model by adopting an edge-based smoothed finite element method with combination of mass-redistributed method is then established to more efficiently simulate the transient oxygen transfer process in tissue scaffolds. The proposed new method allows large time steps to model the oxygen diffusion process without losing numerical accuracy, thereby enhancing the computational efficiency significantly, in particular for the design optimization problems which typically require numerous analysis iterations. A number of different scaffold designs are examined either under net diffusion without cell seeding, or under cellular oxygen/nutrient uptake with or without considering cell viability. The association between the homogenized effective diffusivity of net scaffold microstructures and corresponding transient diffusion and time-dependent cellular activities is divulged. This study provides some insights into scaffold design.
Collapse
|
26
|
ADSCs on PLLA/PCL Hybrid Nanoscaffold and Gelatin Modification: Cytocompatibility and Mechanical Properties. Avicenna J Med Biotechnol 2015; 7:32-8. [PMID: 25926950 PMCID: PMC4388888] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/12/2014] [Accepted: 05/17/2014] [Indexed: 11/09/2022] Open
Abstract
BACKGROUND Development of tissue engineering and regenerative medicine has led to designing scaffolds and their modification to provide a better microenvironment which mimics the natural niche of the cells. Gelatin surface modification was applied to improve scaffold flexibility and cytocompatibility. METHODS PLLA/PCL aligned fibrous scaffold was fabricated using electrospinning method. ADSCs were seeded after O2 plasma treatment and gelatin coating of the scaffolds. The morphological and mechanical properties of blends were assessed by Scanning Electron Microscopy (SEM), tensile test and ATR-FTIR. The cells proliferation was evaluated by MTT assay. RESULTS Based on the results, it is supposed that gelatin coating is a brilliant method of surface modification which significantly increases the mechanical properties of scaffold without any changes on the construction or on the direction of nanofibers which conducts cell's elongation. MTT analysis exhibited that ADSCs attachment, viability and proliferation significantly (p < 0.05) increased after gelatin treatment. CONCLUSION Gelatin surface modification is a highly beneficial method to improve cytocompatibility, flexibility and mechanical features of the scaffolds which doesn't affect the nanofibers construction. Proliferation of Adipose Derived Stem Cells (ADSCs) as a remarkable source of stem cells was investigated for the first time on PLLA/PCL hybrid scaffold.
Collapse
|
27
|
Continuous, real-time bioimaging of chemical bioavailability and toxicology using autonomously bioluminescent human cell lines. PROCEEDINGS OF SPIE--THE INTERNATIONAL SOCIETY FOR OPTICAL ENGINEERING 2013; 8723:872310. [PMID: 26516295 DOI: 10.1117/12.2015030] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
Abstract
Bioluminescent imaging is an emerging biomedical surveillance strategy that uses external cameras to detect in vivo light generated in small animal models of human physiology or in vitro light generated in tissue culture or tissue scaffold mimics of human anatomy. The most widely utilized of reporters is the firefly luciferase (luc) gene; however, it generates light only upon addition of a chemical substrate, thus only generating intermittent single time point data snapshots. To overcome this disadvantage, we have demonstrated substrate-independent bioluminescent imaging using an optimized bacterial bioluminescence (lux) system. The lux reporter produces bioluminescence autonomously using components found naturally within the cell, thereby allowing imaging to occur continuously and in real-time over the lifetime of the host. We have validated this technology in human cells with demonstrated chemical toxicological profiling against exotoxin exposures at signal strengths comparable to existing luc systems (~1.33 × 107 photons/second). As a proof-in-principle demonstration, we have engineered breast carcinoma cells to express bioluminescence for real-time screening of endocrine disrupting chemicals and validated detection of 17β-estradiol (EC50 = ~ 10 pM). These and other applications of this new reporter technology will be discussed as potential new pathways towards improved models of target chemical bioavailability, toxicology, efficacy, and human safety.
Collapse
|
28
|
Hepatic tissue engineering using scaffolds: state of the art. Avicenna J Med Biotechnol 2009; 1:135-45. [PMID: 23408654 PMCID: PMC3558138] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/22/2009] [Accepted: 10/28/2009] [Indexed: 11/05/2022] Open
Abstract
Severe hepatic failure accounts for many deaths and raises medical costs each year worldwide. Currently, liver transplantation is the most common therapeutic option for patients with end-stage chronic liver disease. Due to decrease in the number of organ donors, many in need of transplantation continue to remain on the waiting list. Hepatic Tissue Engineering is a step toward alleviating the need for organ donors. Regenerative medicine and tissue engineering require two complementary key ingredients as follows: 1) biologically compatible scaffolds that can be readily adopted by the body system without harm, and 2) suitable cells including various stem cells or primary cells that effectively replace the damaged tissues without adverse consequences. Yet many challenges must be overcome such as scaffold choice, cell source and immunological barriers. Today, hepatogenic differentiation of stem cells has created trust and promise for use of these cells in hepatic tissue engineering and liver replacement. However, using suitable scaffolds is an important key to achieving the necessary functions required for hepatic replacement. In recent years, different scaffolds have been used for liver tissue engineering. In this review, we have presented different concepts in using cell /scaffold constructs to guide hepatic tissue engineering.
Collapse
|