Conjugated Microporous Polymers Based on Ferrocene Units as Highly Efficient Electrodes for Energy Storage

This work describes the facile designing of three conjugated microporous polymers incorporated based on the ferrocene (FC) unit with 1,4-bis(4,6-diamino-s-triazin-2-yl)benzene (PDAT), tris(4-aminophenyl)amine (TPA-NH₂), and tetrakis(4-aminophenyl)ethane (TPE-NH₂) to form PDAT-FC, TPA-FC, and TPE-FC CMPs from Schiff base reaction of 1,1'-diacetylferrocene monomer with these three aryl amines, respectively, for efficient supercapacitor electrodes. PDAT-FC and TPA-FC CMPs samples featured higher surface area values of approximately 502 and 701 m² g^-1, in addition to their possession of both micropores and mesopores. In particular, the TPA-FC CMP electrode achieved more extended discharge time compared with the other two FC CMPs, demonstrating good capacitive performance with a specific capacitance of 129 F g^-1 and capacitance retention value of 96% next 5000 cycles. This feature of TPA-FC CMP is attributed to the presence of redox-active triphenylamine and ferrocene units in its backbone, in addition to a high surface area and good porosity that facilitates the redox process and provides rapid kinetics.

Ultrastable Conjugated Microporous Polymers Containing Benzobisthiadiazole and Pyrene Building Blocks for Energy Storage Applications

In recent years, conjugated microporous polymers (CMPs) have become important precursors for environmental and energy applications, compared with inorganic electrode materials, due to their ease of preparation, facile charge storage process, π-conjugated structures, relatively high thermal and chemical stability, abundance in nature, and high surface areas. Therefore, in this study, we designed and prepared new benzobisthiadiazole (BBT)-linked CMPs (BBT-CMPs) using a simple Sonogashira couplings reaction by reaction of 4,8-dibromobenzo(1,2-c;4,5-c')bis(1,2,5)thiadiazole (BBT-Br₂) with ethynyl derivatives of triphenylamine (TPA-T), pyrene (Py-T), and tetraphenylethene (TPE-T), respectively, to afford TPA-BBT-CMP, Py-BBT-CMP, and TPE-BBT-CMP. The chemical structure and properties of BBT-CMPs such as surface areas, pore size, surface morphologies, and thermal stability using different measurements were discussed in detail. Among the studied BBT-CMPs, we revealed that TPE-BBT-CMP displayed high degradation temperature, up to 340 °C, with high char yield and regular, aggregated sphere based on thermogravimetric analysis (TGA) and scanning electron microscopy (SEM), respectively. Furthermore, the Py-BBT-CMP as organic electrode showed an outstanding specific capacitance of 228 F g^-1 and superior capacitance stability of 93.2% (over 2000 cycles). Based on theoretical results, an important role of BBT-CMPs, due to their electronic structure, was revealed to be enhancing the charge storage. Furthermore, all three CMP polymers featured a high conjugation system, leading to improved electron conduction and small bandgaps.

Photocatalytic Water-Splitting by Organic Conjugated Polymers: Opportunities and Challenges

The future challenges associated with the shortage of fossil fuels and their current environmental impacts intrigued the researchers to look for alternative ways of generating green energy. Solar-driven water splitting into oxygen and hydrogen is one of those advanced strategies. Researchers have studied various semiconductor materials to achieve potential results. However, it encountered multiple challenges such as high cost, low photostability and efficiency, and required multistep modifications. The conjugated polymers (CPs) have emerged as promising alternatives for conventional inorganic semiconductors. The CPs offer low cost, sufficient light absorption efficiency, excellent photo and chemical stability, and molecular optoelectronic tunable characteristics. Furthermore, organic CPs also present higher flexibility to tune the basic framework of the backbone of the polymers, amendments in the sidechain to incorporate desired functionalities, and much-needed porosity to serve better for photocatalytic applications. This review article summarizes the recent advancements made in visible-light-driven water splitting covering the aspects of synthetic strategies and experimental parameters employed for water splitting reactions with special emphasis on conjugated polymers such as linear CPs, planarized CPs, graphitic carbon nitride (g-C₃ N₄ ), conjugated microporous polymers (CMPs), covalent organic frameworks (COFs), and conjugated polymer-based nanocomposites (CPNCs). The current challenges and future prospects have also been described briefly.

Ferrocene-Based Conjugated Microporous Polymers Derived from Yamamoto Coupling for Gas Storage and Dye Removal

Conjugated microporous polymers (CMPs) have conjugated skeleton and permanent porosity, and exhibit huge potential in developing novel functional materials for resolving the challenging energy and environment issues. Metal-containing CMPs often exhibited unique properties. In the present manuscript, ferrocene-based conjugated microporous polymers (FcCMPs) were designed and synthesized with 1,1'-dibromoferrocene and 5,10,15,20-Tetrakis(4- bromophenyl) porphyrin (FcCMP-1) or Tetra (p-bromophenyl) methane (FcCMP-2) as building units via Yamamoto coupling. FcCMPs were amorphous, and exhibited excellent thermal and physicochemical stability. The BET surface area of FcCMP-1 and FcCMP-2 was 638 m2/g and 422 m2/g, respectively. In comparison with FcCMP-2, FcCMP-1 displayed better gas storage capacity due to higher porosity. FcCMPs were also used as an adsorbent for removal of methyl violet from aqueous solution, and exhibited excellent adsorption properties due to the interaction between electron-rich conjugated structure of the polymers and methyl violet with cationic groups. Moreover, FcCMPs could be extracted and regenerated by an eluent and then re-used for high efficient removal of methyl violet.

[Determination of seven organophosphorus insecticides in fruits and vegetables by ultra-high performance liquid chromatography-tandem mass spectrometry based on magnetic conjugated microporous polymers]

A method was developed for the determination of seven organophosphorus insecticides in fruits and vegetables by ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) based on magnetic conjugated microporous polymers (CMPs). Fe₃O₄ nanoparticles modified by phenylene and ethynylene were cross-linked with 1,3,5-tribromobenzene and 1,3,5-trialkynylbenzene to obtain magnetic CMPs. This material with a three-dimensional network structure and covalently built-in Fe₃O₄ nanoparticles could effectively enrich organophosphorus insecticides with a conjugated structure, thus allowing for convenient magnetic separation in an external magnetic field. Under the optimized conditions, the seven organophosphorus pesticides were extracted by using the magnetic CMPs as magnetic solid phase extraction adsorbents. The limits of detection (LODs) of the seven target analytes were in the range of 0.12-5.0 ng/kg. The recoveries were between 80.8% and 125%, and the relative standard deviations (RSDs, n=5) were less than 6%. The organophosphorus insecticides were detected in fruits and vegetables at concentrations in the range of 1.1-500.0 ng/kg. The method is sensitive, accurate and reliable, and it shows good application potential for the determination of the organophosphorus pesticides in fruits and vegetables.

Highly Porous Organic Polymers for Hydrogen Fuel Storage

Hydrogen (H2) is one of the best candidates to replace current petroleum energy resources due to its rich abundance and clean combustion. However, the storage of H2 presents a major challenge. There are two methods for storing H2 fuel, chemical and physical, both of which have some advantages and disadvantages. In physical storage, highly porous organic polymers are of particular interest, since they are low cost, easy to scale up, metal-free, and environmentally friendly. In this review, highly porous polymers for H2 fuel storage are examined from five perspectives: (a) brief comparison of H2 storage in highly porous polymers and other storage media; (b) theoretical considerations of the physical storage of H2 molecules in porous polymers; (c) H2 storage in different classes of highly porous organic polymers; (d) characterization of microporosity in these polymers; and (e) future developments for highly porous organic polymers for H2 fuel storage. These topics will provide an introductory overview of highly porous organic polymers in H2 fuel storage.

Fast and efficient synthesis of microporous polymer nanomembranes via light-induced click reaction

Conjugated microporous polymers (CMPs) are materials of low density and high intrinsic porosity. This is due to the use of rigid building blocks consisting only of lightweight elements. These materials are usually stable up to temperatures of 400 °C and are chemically inert, since the networks are highly crosslinked via strong covalent bonds, making them ideal candidates for demanding applications in hostile environments. However, the high stability and chemical inertness pose problems in the processing of the CMP materials and their integration in functional devices. Especially the application of these materials for membrane separation has been limited due to their insoluble nature when synthesized as bulk material. To make full use of the beneficial properties of CMPs for membrane applications, their synthesis and functionalization on surfaces become increasingly important. In this respect, we recently introduced the solid liquid interfacial layer-by-layer (LbL) synthesis of CMP-nanomembranes via Cu catalyzed azide–alkyne cycloaddition (CuAAC). However, this process featured very long reaction times and limited scalability. Herein we present the synthesis of surface grown CMP thin films and nanomembranes via light induced thiol–yne click reaction. Using this reaction, we could greatly enhance the CMP nanomembrane synthesis and further broaden the variability of the LbL approach.