Cheminformatics and Machine Learning Approaches to Assess Aquatic Toxicity Profiles of Fullerene Derivatives

Fullerene derivatives (FDs) are widely used in nanomaterials production, the pharmaceutical industry and biomedicine. In the present study, we focused on the potential toxic effects of FDs on the aquatic environment. First, we analyzed the binding affinity of 169 FDs to 10 human proteins (1D6U, 1E3K, 1GOS, 1GS4, 1H82, 1OG5, 1UOM, 2F9Q, 2J0D, 3ERT) obtained from the Protein Data Bank (PDB) and showing high similarity to proteins from aquatic species. Then, the binding activity of 169 FDs to the enzyme acetylcholinesterase (AChE)-as a known target of toxins in fathead minnows and Daphnia magna, causing the inhibition of AChE-was analyzed. Finally, the structural aquatic toxicity alerts obtained from ToxAlert were used to confirm the possible mechanism of action. Machine learning and cheminformatics tools were used to analyze the data. Counter-propagation artificial neural network (CPANN) models were used to determine key binding properties of FDs to proteins associated with aquatic toxicity. Predicting the binding affinity of unknown FDs using quantitative structure-activity relationship (QSAR) models eliminates the need for complex and time-consuming calculations. The results of the study show which structural features of FDs have the greatest impact on aquatic organisms and help prioritize FDs and make manufacturing decisions.

Enhanced Photocatalytic Coupling of Benzylamine to N-Benzylidene Benzylamine over the Organic-Inorganic Composites F70-TiO2 Based on Fullerenes Derivatives and TiO2

The organic-inorganic composites F70-TiO₂, based on fullerene with carboxyl group derivatives and TiO₂ semiconductor, have been designed and constructed to become an optical-functional photocatalyst via the facile sol-gel method. The composite photocatalyst obtained shows excellent photocatalytic activity for the high-efficiency conversion of benzylamine (BA) to N-benzylidene benzylamine (NBBA) with air pressure at a normal temperature under visible light irradiation. By optimizing the composition, the composites with the 1:15 mass ratio of F70 and TiO₂, denoted as F70-TiO₂(1:15), demonstrated the highest reaction efficiency for benzylamine (>98% conversion) to N-benzylidene benzylamine (>93% selectivity) in this study. However, pure TiO₂ and fullerene derivatives (F70) exhibit decreased conversion (56.3% and 89.7%, respectively) and selectivity (83.8% and 86.0%, respectively). The UV-vis diffuse reflectance spectra (DRS) and Mott-Schottky experiment's results indicate that the introduction of fullerene derivatives into anatase TiO₂ would greatly broaden the visible light response range and adjust the energy band positions of the composites, enhancing the sunlight utilization and promoting the photogenerated charge (e^--h⁺) separation and transfer. Specifically, a series of results on the in situ EPR tests and the photo-electrophysical experiment indicate that the separated charges from the hybrid could effectively activate benzylamine and O₂ to accelerate the formation of active intermediates, and then couple with free BA molecules to form the desired production of N-BBA. The effective combination, on a molecular scale, between fullerene and titanium dioxide has provided a profound understanding of the photocatalysis mechanism. This work elaborates and makes clear the relationship between the structure and the performance of functional photocatalysts.

Application of Bis-Adducts of Phenyl-C61 Butyric Acid Methyl Ester in Promoting the Open-Circuit Voltage of Indoor Organic Photovoltaics

Fullerene-based indoor OPVs, particularly phenyl-C₆₁ butyric acid methyl ester (PCBM), has been regarded as a prospective harvesting indoor light energy source to drive low-power consumption electronic devices such as sensors and IoTs. Due to the low tunability of its inherently spherical structure, the performance of the fullerene-based indoor OPVs seem to hit a bottleneck compared with the non-fullerene materials. Here, we explore the potential application of fullerene derivative bis-PCBM in indoor OPVs, which owns a higher the lowest unoccupied molecular orbital (LUMO) level than PCBM. The results show that when blended with PCDTBT, bis-PCBM devices yield a high V_OC of up to 1.05 V and 0.9 V under AM 1.5G illumination and 1000 lx indoor light, compared with the corresponding values of 0.93 V and 0.79 V for PCBM devices. Nevertheless, the disorders in bis-PCBM suppress the J_SC and FF and, therefore, result in a lower efficiency compared to PCBM devices. However, the efficiency and stability differences between the two kinds of cells were much reduced under indoor light conditions. After further optimization of the material composition and fabrication process, bis-PCBM could be an alternative to PCBM, offering great potential for indoor OPV with high performance.

Physiological Response, Oxidative Stress Assessment and Aquaporin Genes Expression of Cherry Tomato (Solanum lycopersicum L.) Exposed to Hyper-Harmonized Fullerene Water Complex

The rapid production and numerous applications of nanomaterials warrant the necessity and importance of examining nanoparticles in terms to their environmental and biological effects and implications. In this study, the effects of a water-soluble hyper-harmonized hydroxyl-modified fullerene (3HFWC) on cherry tomato seed germination, seedlings growth, physiological response and fruiting was evaluated. Changes in the photosynthetic pigments content, oxidative stress assessment, and aquaporin genes expression in cherry tomato plants were studied after during short- and long-term continuous exposure to 3HFWC nanosubstance (200 mg/L). Increased levels of photosynthetic pigments in leaves, lycopene in fruits, decreased levels of hydrogen peroxide content, activation of cellular antioxidant enzymes such as superoxide dismutase, catalase and peroxidase and increased aquaporin gene expression (PIP1;3, PIP1;5 and PIP2;4) were observed in 3HFWC nanosubstance-exposed plants in comparison to control, untreated cherry tomato plants. The 3HFWC nanosubstance showed positive effects on cherry tomato seed germination, plantlet growth and lycopene content in fruits and may be considered as a promising nanofertilizer.

Optical Properties and Light-Induced Charge Transfer in Selected Aromatic C60 Fullerene Derivatives and in Their Bulk Heterojunctions with Poly(3-Hexylthiophene)

Fullerene derivatives offer great scope for modification of the basic molecule, often called a buckyball. In recent years, they have been the subject of numerous studies, in particular in terms of their applications, including in solar cells. Here, the properties of four recently synthesized fullerene C60 derivatives were examined regarding their optical properties and the efficiency of the charge transfer process, both in fullerene derivatives themselves and in their heterojunctions with poly (3-hexylthiophene). Optical absorption, electron spin resonance (ESR), and time-resolved photoluminescence (TRPL) techniques were applied to study the synthesized molecules. It was shown that the absorption processes in fullerene derivatives are dominated by absorption of the fullerene cage and do not significantly depend on the type of the derivative. It was also found by ESR and TRPL studies that asymmetrical, dipole-like derivatives exhibit stronger light-induced charge transfer properties than their symmetrical counterparts. The observed inhomogeneous broadening of the ESR lines indicated a large disorder of all polymer-fullerene derivative blends. The density functional theory was applied to explain the results of the optical absorption experiments.

Carbene Addition Isomers of C70 formed in the Flame of Low-Pressure Combustion

In the flames during low-pressure combustion, not only a rich variety of fullerenes but also many reactive intermediates can be produced (e.g., carbene, CH₂) that are short-lived and cannot be stabilized directly under normal circumstances. These intermediates can be captured by fullerene carbon cages for stabilization. In this paper, three C₇₁H₂ isomers were synthesized in situ in low-pressure benzene-acetylene-oxygen diffusion flame combustion. The results, which were unambiguously characterized by single-crystal X-ray diffraction, show that the three isomers are carbene addition products of D_5h-C₇₀ on different sites. The relative energies and stability of different C₇₁H₂ isomers are revealed by Ultraviolet-Visible (UV-Vis) absorption spectroscopy, in combination with theoretical calculations, in this work. Both the in situ capture and theoretical study of these C₇₁H₂ isomers in low-pressure combustion will provide more information regarding carbene additions to other fullerenes or other carbon clusters at high temperatures.

Molecular Doping Directed by a Neutral Radical

Molecular doping makes possible tunable electronic properties of organic semiconductors, yet a lack of control of the doping process narrows its scope for advancing organic electronics. Here, we demonstrate that the molecular doping process can be improved by introducing a neutral radical molecule, namely nitroxyl radical (2,2,6,6-teramethylpiperidin-i-yl) oxyl (TEMPO). Fullerene derivatives are used as the host and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazoles (DMBI-H) as the n-type dopant. TEMPO can abstract a hydrogen atom from DMBI-H and transform the latter into a much stronger reducing agent DMBI•, which efficiently dopes the fullerene derivative to yield an electrical conductivity of 4.4 S cm-1. However, without TEMPO, the fullerene derivative is only weakly doped likely by a hydride transfer following by an inefficient electron transfer. This work unambiguously identifies the doping pathway in fullerene derivative/DMBI-H systems in the presence of TEMPO as the transfer of a hydrogen atom accompanied by electron transfer. In the absence of TEMPO, the doping process inevitably leads to the formation of less symmetrical hydrogenated fullerene derivative anions or radicals, which adversely affect the molecular packing. By adding TEMPO we can exclude the formation of such species and, thus, improve charge transport. In addition, a lower temperature is sufficient to meet an efficient doping process in the presence of TEMPO. Thereby, we provide an extra control of the doping process, enabling enhanced thermoelectric performance at a low processing temperature.

Modification Approaches to Enhance Dehydration Properties of Sodium Alginate-Based Pervaporation Membranes

Transport characteristics of sodium alginate (SA) membranes cross-linked with CaCl₂ and modified with fullerenol and fullerene derivative with L-arginine for pervaporation dehydration were improved applying various approaches, including the selection of a porous substrate for the creation of a thin selective SA-based layer, and the deposition of nano-sized polyelectrolyte (PEL) layers through the use of a layer-by-layer (Lbl) method. The impacts of commercial porous substrates made of polyacrylonitrile (PAN), regenerated cellulose, and aromatic polysulfone amide were investigated by scanning electron microscopy (SEM), atomic force microscopy (AFM), standard porosimetry method, and water filtration. The effects of PEL combinations (such as poly(sodium 4-styrene sulfonate) (PSS)/SA, PSS/chitosan, PSS/polyacrylic acid, PSS/poly(allylamine hydrochloride)) and the number of PEL bilayers deposited with the Lbl technique on the properties of the SA and SA/fullerene derivative membranes were studied by SEM, AFM, and contact angle measurements. The best characteristics were exhibited by a cross-linked PAN-supported SA/fullerenol (5%) membrane with five PSS/SA bilayers: permeation flux of 0.68–1.38 kg/(m²h), 0.18–1.55 kg/(m²h), and 0.50–1.15 kg/(m²h), and over 99.7, 99.0, and 89.0 wt.% water in the permeate for the pervaporation dehydration of isopropanol (12–70 wt.% water), ethanol (4–70 wt.% water), and tetrahydrofuran (5.7–70 wt.% water), respectively. It was demonstrated that the mutual application of bulk and surface modifications essentially improved the membrane’s characteristics in pervaporation dehydration.

The Importance of Quantifying the Composition of the Amorphous Intermixed Phase in Organic Solar Cells

The relation of phase morphology and solid-state microstructure with organic photovoltaic (OPV) device performance has intensely been investigated over the last twenty years. While it has been established that a combination of donor:acceptor intermixing and presence of relatively phase-pure donor and acceptor domains is needed to get an optimum compromise between charge generation and charge transport/charge extraction, a quantitative picture of how much intermixing is needed is still lacking. This is mainly due to the difficulty in quantitatively analyzing the intermixed phase, which generally is amorphous. Here, fast scanning calorimetry, which allows measurement of device-relevant thin films (<200 nm thickness), is exploited to deduce the precise composition of the intermixed phase in bulk-heterojunction structures. The power of fast scanning calorimetry is illustrated by considering two polymer:fullerene model systems. Somewhat surprisingly, it is found that a relatively small fraction (<15 wt%) of an acceptor in the intermixed amorphous phase leads to efficient charge generation. In contrast, charge transport can only be sustained in blends with a significant amount of the acceptor in the intermixed phase (in this case: ≈58 wt%). This example shows that fast scanning calorimetry is an important tool for establishing a complete compositional characterization of organic bulk heterojunctions. Hence, it will be critical in advancing quantitative morphology-function models that allow for the rational design of these devices, and in delivering insights in, for example, solar cell degradation mechanisms via phase separation, especially for more complex high-performing systems such as nonfullerene acceptor:polymer bulk heterojunctions.

Effects of Covalent Conjugates of Fullerene Derivatives with Xanthene Dyes on Activity of Ca2+-ATPase of the Sarcoplasmic Reticulum

The effects of the newly synthesized covalent conjugates of water-soluble fullerene derivatives (WSFD) with xanthene dyes: polyanionic WSFD-fluorescein (1), polycationic WSFD-fluorescein (2), polyanionic WSFD-eosin (3), and polyanionic WSFD (4), polycationic WSFD (5), fluorescein (6) and eosin (7), on activity of the membrane-bound Ca²⁺-ATPase of the sarcoplasmic reticulum (SR Ca²⁺-ATPase) were studied. Compounds 1, 3, 4, 6, and 7 inhibit the hydrolytic function of the enzyme, the inhibition constants for these compounds are Ki=1.3×10^-5 M (1), Ki=4.7×10^-6 M (3), Ki=2.5×10^-6 M (4), Ki=6.1×10^-5 M (6), and Ki=5.8×10^-6 M (7). The effects of compounds 3, 6, and 7 on the hydrolytic function of the enzyme is competitive; compounds 1 and 4 are noncompetitive. Polycationic WSFD fluorescein (2) and polycationic WSFD (5) do not affect ATP hydrolysis, but inhibit active Ca²⁺ transport in a concentration of 0.01 mM by 100±10 and 40±4%, respectively. Conjugates 1 and 3 completely inhibit the hydrolytic and transport functions of the enzyme in a concentration of 0.01 mM, and in a concentration of 0.001 mM inhibit active Ca²⁺ transport by 60±6 and 55±6% uncoupling the hydrolytic and transport functions of SR Ca²⁺-ATPases. The obtained results demonstrate a significant effect of the studied compounds on the active transmembrane transfer of Ca²⁺ and make it possible to predict the presence of antimetastatic and antiaggregatory activities of the studied compounds.

α-DTC70 Fullerene Performs Significantly Better than β-DTC70 as Electron Transporting Material in Perovskite Solar Cells

In this work, two new C70 isomers, α and β bis(2-(thiophen-2-yl)ethyl)-C70-fullerene mono-adducts (DTC70), were synthesized, characterized and used as electron transporting materials (ETMs) in perovskite solar cells (PSCs). Our results show that the α isomer improves both the J sc and FF values of the devices, when compared to the results for the β-isomer and to those for phenyl-C70-butyric acid methyl ester (PC71BM), used as control. Devices based on α-DTC70 achieved a power conversion efficiency (PCE) of 15.9%, which is higher than that observed with PC71BM (15.1%).

Superlubricity of Fullerene Derivatives Induced by Host-Guest Assembly

Fullerenes have been recognized as good candidates for solid lubricants. In this study, the microscale superlubricity of fullerene derivatives was accomplished by the construction of regular host-guest assembly structures. Herein, the host-guest assembly structures of fullerene derivatives were successfully constructed on a highly oriented pyrolytic graphite (HOPG) surface by introducing the macrocycles as the templates and were explicitly revealed by scanning tunneling microscopy (STM). Meanwhile, the nanotribological properties of the host-guest assemblies were measured using atomic force microscopy (AFM), revealing ultralow friction coefficients of 0.003-0.008, which could be attributed to the restriction on removal of fullerene molecules after introducing the templates. The interaction energies were calculated by density functional theory (DFT) method, which indicates the correlation between friction coefficients and interaction strength in the host-guest assemblies. The effort on fullerene-related superlubricity could extend the solid superlubrication systems and provide a novel pathway to explore the friction mechanisms at the molecular level.

A Comprehensive Cheminformatics Analysis of Structural Features Affecting the Binding Activity of Fullerene Derivatives

Nanostructures like fullerene derivatives (FDs) belong to a new family of nano-sized organic compounds. Fullerenes have found a widespread application in material science, pharmaceutical, biomedical, and medical fields. This fact caused the importance of the study of pharmacological as well as toxicological properties of this relatively new family of chemicals. In this work, a large set of 169 FDs and their binding activity to 1117 proteins was investigated. The structure-based descriptors widely used in drug design (so-called drug-like descriptors) were applied to understand cheminformatics characteristics related to the binding activity of fullerene nanostructures. Investigation of applied descriptors demonstrated that polarizability, topological diameter, and rotatable bonds play the most significant role in the binding activity of FDs. Various cheminformatics methods, including the counter propagation artificial neural network (CPANN) and Kohonen network as visualization tool, were applied. The results of this study can be applied to compose the priority list for testing in risk assessment related to the toxicological properties of FDs. The pharmacologist can filter the data from the heat map to view all possible side effects for selected FDs.

PffBT4T-2OD Based Solar Cells with Aryl-Substituted N-Methyl-Fulleropyrrolidine Acceptors

Novel C60 and C70 N-methyl-fulleropyrrolidine derivatives, containing both electron withdrawing and electron donating substituent groups, were synthesized by the well-known Prato reaction. The corresponding highest occupied molecular orbital (HOMO)/lowest unoccupied molecular orbital (LUMO) energy levels were determined by cyclic voltammetry, from the onset oxidation and reduction potentials, respectively. Some of the novel fullerenes have higher LUMO levels than the standards PC61BM and PC71BM. When tested in PffBT4T-2OD based polymer solar cells, with the standard architecture ITO/PEDOT:PSS/Active-Layer/Ca/Al, these fullerenes do not bring about any efficiency improvements compared to the standard PC71BM system, however they show how the electronic nature of the different substituents strongly affects the efficiency of the corresponding organic photovoltaic (OPV) devices. The functionalization of C70 yields a mixture of regioisomers and density functional theory (DFT) calculations show that these have systematically different electronic properties. This electronic inhomogeneity is likely responsible for the lower performance observed in devices containing C70 derivatives. These results help to understand how new fullerene acceptors can affect the performance of OPV devices.

Targeted Therapy for Interfacial Engineering Toward Stable and Efficient Perovskite Solar Cells

The poor long-term stability of organic-inorganic hybrid halide perovskite solar cells (pero-SCs) remains a big challenge for their commercialization. Although strategies such as encapsulation, doping, and passivation have been reported, there remains a lack of understanding of the water resistance and thermal stability of pero-SCs. A fullerene derivative, [6,6]-phenyl-C₆₁ -butyric acid-N,N-dimethyl-3-(2-thienyl)propanam ester (PCBB-S-N) containing a functional sulfur atom and C_60, is synthesized and employed as electron transporting layer (ETL)/intermediary layer to targetedly heal the multitype defects in pero-SCs or assist the growth of ETL, such as [6,6]-phenyl-C₆₁ -butyric acid methyl ester (PCBM), in planar p-i-n pero-SCs. The repaired pero-SCs can not only dramatically improve their power conversion efficiencies, but also address stability issues under moisture and high temperature. The corresponding mechanism of PCBB-S-N with targeted therapy effect in a device is systematically investigated by both experiments and theoretical calculation. This work demonstrates that the proposed fullerene derivative with finely tuned chemical structure can be a promising ETL candidate or intermediary to approach stable and efficient planar p-i-n pero-SCs.

Variation of Interfacial Interactions in PC61BM-like Electron-Transporting Compounds for Perovskite Solar Cells

The synthesis, characterization, and incorporation of phenyl-C₆₁-butyric acid methyl ester (PC₆₁BM)-like derivatives as electron transporting materials (ETMs) in inverted perovskite solar cells (PSCs) are reported. These compounds have the same structure except for the ester substituent, which was varied from methyl to phenyl to thienyl and to pyridyl. The three latter derivatives performed better than PC₆₁BM in PSCs, mainly attributed to the specific interactions of the fullerenes with the perovskite layer, as evidenced by X-ray photoelectron spectroscopy (XPS) and steady-state and time-resolved photoluminescence (SS- and TRPL) measurements. The experimental results were fully supported by density functional theory (DFT) calculations, which showed that the strongest interactions were exhibited by the compound possessing the pyridyl substituent.

Electron-Transfer Ionization of Nanoparticles, Polymers, Porphyrins, and Fullerenes Using Synthetically Tunable α-Cyanophenylenevinylenes as UV MALDI-MS Matrices

Electron-transfer ionization in matrix-assisted laser desorption/ionization (ET-MALDI) is widely used for the analysis of functional materials that are labile, unstable, and reactive in nature. However, conventional ET matrices (e.g., trans-2-[3-(4- tert-butylphenyl)-2-methyl-2-propenylidene] malononitrile (DCTB)) still lack in performance due to cluster formation, reactivity with analytes, and vacuum instability. In this contribution, we report the use of α-cyanophenylenevinylene derivatives as UV MALDI matrices for the analysis, by ET ionization, of nanoparticles, polymers, porphyrins, and fullerenes. The synthetic versatility of the phenylenevinylene (PV) core allowed us to modulate physicochemical properties, fundamental for efficient formation of primary ions in the gas phase under MALDI conditions, such as planarity, ionization potentials, molar absorptivity, and laser thresholds. For instance, introduction of -CN groups in vinyl positions of the PV core induced structural disruption in planarity in the new α-CNPV derivatives, shifting their maximum molar absorptivity to UV wavelengths and increasing their ionization energy values above 8.0 eV. UV MALDI-relevant photophysical properties in solution and solid state are reported (λ_max and ε_355nm). LDI spectra of α-CNPVs exhibit predominant signals due to M^+• and [M + H]⁺ species, whereas the standard matrix DCTB shows peaks associated with clusters and nondesirable products. The mass spectrometry (MS) performance of six α-CNPV derivatives was assessed for the ionization of a standard compound, with α-CNPV-CH₃ and α-CNPV-OCH₃ exhibiting better analytical figures of merit than those of a standard matrix (DCTB). These new matrices display high vacuum stability (79%) for up to 240 min of residence in the ionization source, in contrast with DCTB with 13%. Vacuum stability is vital, particularly for applications such as high-throughput analysis and imaging MS. In addition, when a mixture of 20 analytes (PAHs, porphyrins, and triphenylamine dyes) ranging from m/z 300 to 1700 was analyzed via ET-MALDI, we observed analyte coverage of 90% with the α-CNPV-CH₃ derivative, whereas DCTB afforded only 70%. Finally, α-CNPV-CH₃ was tested and compared with DCTB, as ET-MALDI matrix for petroporphyrins, conjugated polymers, gold nanoparticles, and fullerene derivatives analysis, outperforming in most cases the standard matrix.

New thiophene-based C60 fullerene derivatives as efficient electron transporting materials for perovskite solar cells

The synthesis of new C₆₀ fullerene derivatives functionalized with thiophene moieties as well as with electron donating or electron withdrawing groups, bromine (Br) or cyano (CN), respectively, using Bingel reactions is reported. The synthesized derivatives were used as the electron transporting materials (ETMs) in inverted perovskite solar cells (PSCs). Compared to devices fabricated with [6,6]-phenyl-C₆₁-butyric acid methyl ester (PC₆₁BM), the new derivatives showed similar electrochemical properties and electron mobilities. However, PSCs based on the new derivatives synthesized in this work exhibited higher power conversion efficiencies (PCEs) than PC₆₁BM based devices, which were ascribed to their better passivation ability, likely due to specific interactions between the fullerene addend and the perovskite layer surface. Devices based on the fullerene bearing the CN group exhibited an additionally improved efficiency due to the increased dielectric constant (ε _r) of this derivative. These results show that the new functionalized fullerene derivatives can act as efficient ETMs in inverted PSCs.

Tailoring the Open-Circuit Voltage Deficit of Wide-Band-Gap Perovskite Solar Cells Using Alkyl Chain-Substituted Fullerene Derivatives

Wide-band-gap (WB) perovskite devices are promising as the top cell of silicon-perovskite tandem devices to boost the efficiency beyond the Shockley-Queisser limit. Here, we tailor the performance parameters of WB mixed-halide perovskite solar cell with long alkyl chain-substituted fullerene derivatives as an electron transport layer (ETL). The device with C₆₀-fused N-methylpyrrolidine- meta-dodecyl phenyl (C₆₀MC₁₂) demonstrates an enhanced power conversion efficiency of 16.74% with the record open circuit voltage ( V_OC) of 1.24 V, an increase by 70 mV with concomitant V_OC deficit reduction to 0.47 V. This is achieved by mitigating the recombination loss through the use of highly crystalline C₆₀MC₁₂ film compared to amorphous [6,6]-phenyl-C₆₁-butyric acid methyl ester layer. The device analysis reveals the soothing of the defect activities with shallower defect states and passivation of the interface recombination centers for the device with C₆₀MC₁₂. We ascribe this property to the crystallinity of fullerene derivatives as ETL, which is also important for the optimization of device parameters, besides the band alignment matching of WB perovskite devices.

Drawing a different picture with pencil lead as matrix-assisted laser desorption/ionization matrix for fullerene derivatives

Inspired by reports on the use of pencil lead as a matrix-assisted laser desorption/ionization matrix, paving the way towards matrix-free matrix-assisted laser desorption/ionization, the present investigation evaluates its usage with organic fullerene derivatives. Currently, this class of compounds is best analysed using the electron transfer matrix trans-2-[3-(4-tert-butylphenyl)-2-methyl-2-propenylidene] malononitrile (DCTB), which was employed as the standard here. The suitability of pencil lead was additionally compared to direct (i.e. no matrix) laser desorption/ionization-mass spectrometry. The use of (DCTB) was identified as the by far gentler method, producing spectra with abundant molecular ion signals and much reduced fragmentation. Analytically, pencil lead was found to be ineffective as a matrix, however, appears to be an extremely easy and inexpensive method for producing sodium and potassium adducts.

N-Type Organic Thermoelectrics: Improved Power Factor by Tailoring Host-Dopant Miscibility

In this contribution, for the first time, the polarity of fullerene derivatives is tailored to enhance the miscibility between the host and dopant molecules. A fullerene derivative with a hydrophilic triethylene glycol type side chain (PTEG-1) is used as the host and (4-(1,3-dimethyl-2,3-dihydro-1H-benzoimidazol-2-yl)phenyl)dimethylamine n-DMBI) as the dopant. Thereby, the doping efficiency can be greatly improved to around 18% (<1% for a nonpolar reference sample) with optimized electrical conductivity of 2.05 S cm^-1 , which represents the best result for solution-processed fullerene derivatives. An in-depth microstructural study indicates that the PTEG-1 molecules readily form layered structures parallel to the substrate after solution processing. The fullerene cage plane is alternated by the triethylene glycol side chain plane; the n-DMBI dopants are mainly incorporated in the side chain plane without disturbing the π-π packing of PTEG-1. This new microstructure, which is rarely observed for codeposited thin films from solution, formed by PTEG-1 and n-DMBI molecules explains the increased miscibility of the host/dopant system at a nanoscale level and the high electrical conductivity. Finally, a power factor of 16.7 µW m^-1 K^-2 is achieved at 40% dopant concentration. This work introduces a new strategy for improving the conductivity of solution-processed n-type organic thermoelectrics.

Effects of Fullerene Derivatives on Activity of Ca2+-ATPase of the Sarcoplasmic Reticulum and cGMP Phosphodiesterase

We studied the effects of new water-soluble polysubstituted fullerene C60 (PFD) derivatives on activity of Ca²⁺-Mg²⁺ ATPase of the sarcoplasmic reticulum and cGMP phosphodiesterase. All examined fullerene derivatives inhibited activity of both enzymes. For instance, PFD-I, PFD-II, PFD-III, PFD-V, PFD-IX, PFD-X, and PFD-XI in a concentration of 5×10^-5 M completely inhibited hydrolytic and transport functions of Ca²⁺-ATPase. These compounds in a concentration of 5×10^-6 suppressed active transport of calcium ions by 51±5, 77±8, 52±5, 52±5, 100±10, 80±8, and 100±10%, respectively, and inhibited ATP hydrolysis by 31±3, 78±8, 18±2, 29±3, 78±8, 63±7, and 73±9%, respectively, uncoupling the hydrolytic and transport functions of the enzyme. PFD-I noncompetitive and reversibly reduced activity of Ca²⁺-ATPase (K_i=2.3×10^-6 M). All the studied fullerene derivatives (except for PFD-VII) inhibited cGMP phosphodiesterase by more than 80% in concentration of 10^-4 M and higher and by more than 50% in concentration of 10^-5 M. PFD-I is a non-competitive reversible inhibitor of cGMP phosphodiesterase (K_i=7×10^-6 M). These results allow us to expect antimetastatic, antiaggregatory, antihypertensive and vasodilative activity of the studied compounds.

Interfacial Reaction of Fulleropyrrolidines Affecting Organic Photovoltaic Performance

Fulleropyrrolidine derivatives are intrinsically basic owing to the amino group within the pyrrolidine structure. It can be predicted that the basicity of fulleropyrrolidine may affect the photovoltaic devices containing an acidic layer (e.g.

, PEDOT

PSS). To clarify the effect of basic fulleropyrrolidine derivatives, we synthesized compounds with an N-benzyl substituent group and fabricated organic photovoltaic (OPV) cells using this N-benzyl fulleropyrrolidine. A device structure with the ITO/PEDOT:PSS/organic layer (PTB7:fulleropyrrolidine)/Ca/Al showed high series resistance, short-circuit current density (J_sc), and low fill factor (FF) values. However, OPV cells having an inverted structure, without the PEDOT:PSS layer, contributed good device performance. We were able to reproduce the high series resistance in a model experiment using aqueous ammonia vapor to treat the PEDOT:PSS layer. Our results indicated that the activity of the PEDOT:PSS layer was affected by the basicity of the fulleropyrrolidines. These results also explain why this phenomenon does not occur at the interface of OPV devices when conventional [6,6]-phenyl C₆₁ butyric acid methyl ester is used as an acceptor material. This finding would contribute to enhancing the OPV device performances from a chemical view point of designing a new compound.

Improved Performance and Stability of Inverted Planar Perovskite Solar Cells Using Fulleropyrrolidine Layers

Inverted planar structure perovskite solar cells (PSCs), due to their low-temperature precessing and lack of hysteretic problems, are attracting increased attention by researchers around the world. Fullerene derivatives are the most widely used electron transport materials (ETMs) in inverted planar perovskite solar cells, especially [6,6]-phenyl-C₆₁-butyric acid methylester (PC₆₁BM), which exhibits very good performance. However, to the best of our knowledge, the influence of adducts on fullerene-based PSCs performance has not been fully explored to date. In this work, two fullerene derivatives, 2,5-(dimethyl ester) C₆₀ fulleropyrrolidine (DMEC₆₀) and the analogous C₇₀ derivative (DMEC₇₀), were synthesized in high yield via a 1,3-dipolar cycloaddition reaction at room temperature and incorporated into CH₃NH₃PbI₃ perovskite solar cells as electron transport materials. Possibly because the attached pyrrolidine ester groups are able to coordinate with the perovskite layer, the devices based on DMEC₆₀ and DMEC₇₀ achieved power conversion efficiencies (PCE) of 15.2% and 16.4%, respectively. Not only were both devices' efficiencies higher than those based on PC₆₁BM and PC₇₁BM, but their stabilities were also higher than those for PCBM-based devices. The results suggest that DMEC₆₀ and DMEC₇₀ are better alternatives than PC₆₁BM and PC₇₁BM for the ETMs in PSCs.

Deposition of LiF onto Films of Fullerene Derivatives Leads to Bulk Doping

One of the most commonly used cathode interlayers for increasing the efficiency of electron injection/extraction in organic electronic devices is an ultrathin layer of LiF. Our capacitance measurements and electrical conductivity analysis show that thin films of fullerene derivatives and their mixtures with polymers are unintentionally doped upon deposition of LiF. The level of doping depends on the chemical structure of the fullerene derivatives. The doping effect on polymer/fullerene mixtures is significant only for blends in which the fullerene content is greater than the polymer content by weight. Our finding has profound implications for the development and characterization of organic photovoltaic devices, including a negative impact of doping on the stability of the device and erroneous estimations of properties such as charge carrier mobility and the dielectric constant.

Facilitating Electron Transportation in Perovskite Solar Cells via Water-Soluble Fullerenol Interlayers

TiO2 is widely used in perovskite solar cells (Pero-SCs), but its low electrical conductivity remains a drawback for application in electron transport layer (ETL). To overcome this problem, an easily accessible hydroxylated fullerene, fullerenol, was employed herein as ETL modified on ITO in n-i-p type (ITO as cathode) Pero-SCs for the first time. The results showed that the insertion of a single layer of fullerenol between perovskite and TiO2 dramatically facilitates the charge transportation and decreases the interfacial resistance. As a consequence, the device performance was greatly improved, and a higher power conversion efficiency of 14.69% was achieved, which is ∼17.5% enhancement compared with that (12.50%) of the control device without the fullerenol interlayer. This work provides a new candidate of interfacial engineering for facilitating the electron transportation in Pero-SCs.

Highly Efficient Planar Perovskite Solar Cells Via Interfacial Modification with Fullerene Derivatives

Planar heterojunction perovskite solar cells with a high efficiency up to 17.76% are fabricated by modifying the compact TiO2 (c-TiO2) with a [6,6]-phenyl-C61-butyric acid (PCBA) monolayer. High quality CH3NH3PbI3 films can be easily fabricated on PCBA-modified c-TiO2 substrates by a one-step solution processing method. Significant improvements of the device parameters are observed after PCBA modification. A high open-circuit voltage (Voc) of 1.16 V has been achieved, indicating that the PCBA monolayer can act as a hole blocking layer to reduce the trap site density atop the c-TiO2 and the hole recombination at the c-TiO2 /perovskite interface. The enhancement of the fill factor, as well as the partial quenching of the fluorescence of perovskite after modification with PCBA, reveals that the charge extraction is improved.

Carboxylic Acid Fullerene (C60) Derivatives Attenuated Neuroinflammatory Responses by Modulating Mitochondrial Dynamics

Fullerene (C60) derivatives, a unique class of compounds with potent antioxidant properties, have been reported to exert a wide variety of biological activities including neuroprotective properties. Mitochondrial dynamics are an important constituent of cellular quality control and function, and an imbalance of the dynamics eventually leads to mitochondria disruption and cell dysfunctions. This study aimed to assess the effects of carboxylic acid C60 derivatives (C60-COOH) on mitochondrial dynamics and elucidate its associated mechanisms in lipopolysaccharide (LPS)-stimulated BV-2 microglial cell model. Using a cell-based functional screening system labeled with DsRed2-mito in BV-2 cells, we showed that LPS stimulation led to excessive mitochondrial fission, increased mitochondrial localization of dynamin-related protein 1 (Drp1), both of which were markedly suppressed by C60-COOH pretreatment. LPS-induced mitochondria reactive oxygen species (ROS) generation and collapse of mitochondrial membrane potential (ΔΨm) were also significantly inhibited by C60-COOH. Moreover, we also found that C60-COOH pretreatment resulted in the attenuation of LPS-mediated activation of nuclear factor (NF)-κB and mitogen-activated protein kinase (MAPK) signaling, as well as the production of pro-inflammatory mediators. Taken together, these findings demonstrated that carboxylic acid C60 derivatives may exert neuroprotective effects through regulating mitochondrial dynamics and functions in microglial cells, thus providing novel insights into the mechanisms of the neuroprotective properties of carboxylic acid C60 derivatives.

Computational studies of acetylcholinesterase complexed with fullerene derivatives: a new insight for Alzheimer disease treatment

Here, we propose five fullerene (C60) derivatives as new drugs against Alzheimer's disease (AD). These compounds were designed to act as new human acetylcholinesterase (HssAChE) inhibitors by blocking its fasciculin II (FASII) binding site. Docking and molecular dynamic results show that our proposals bind to the HssAChE tunnel entrance, forming stable complex, and further binding free energy calculations suggest that three of the derivatives proposed here could be potent HssAChE inhibitors. We found a region formed by a set of residues (Tyr72, Asp74, Trp286, Gln291, Tyr341, and Pro344) which can be further exploited in the drug design of new inhibitors of HssAChE based on C60 derivatives. Results presented here report for the first time by a new class of molecules that can become effective drugs against AD.

High performance planar heterojunction perovskite solar cells with fullerene derivatives as the electron transport layer

In this study, we report the utilization of solution-processed high electrical conductive [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) combined with solution-processed TiO2 as the electron transport layer (ETL) to overcome extremely low electrical conductivity of solution-processed TiO2 ETL in planar heterojunction (PHJ) perovskite hybrid solar cells (pero-HSCs). Due to the much more preferable electron extraction and transportation of PC61BM at the cathode side, a tremendously boosted short-circuit current density (JSC), fill factor (FF) and enhanced power conversion efficiency (PCE) are observed. To further address the wettability issues of perovskite materials on the top of PC61BM, water-soluble fullerene derivative is applied to modulate the surface of PC61BM. Consequently, further advanced FF with slightly enlarged JSC and open-circuit voltage (VOC) are observed. The resulted PCE is comparable with the meso-superstructured solar cells in which high PCEs can be produced. Our studies certainly provide a simple approach to boost the efficiency of PHJ pero-HSCs.

Fullerene-Based Photoactive Layers for Heterojunction Solar Cells: Structure, Absorption Spectra and Charge Transfer Process

The electronic structure and optical absorption spectra of polymer APFO₃, [70]PCBM/APFO₃ and [60]PCBM/APFO₃, were studied with density functional theory (DFT), and the vertical excitation energies were calculated within the framework of the time-dependent DFT (TD-DFT). Visualized charge difference density analysis can be used to label the charge density redistribution for individual fullerene and fullerene/polymer complexes. The results of current work indicate that there is a difference between [60]PCBM and [70]PCBM, and a new charge transfer process is observed. Meanwhile, for the fullerene/polymer complex, all calculations of the twenty excited states were analyzed to reveal all possible charge transfer processes in depth. We also estimated the electronic coupling matrix, reorganization and Gibbs free energy to further calculate the rates of the charge transfer and the recombination. Our results give a clear picture of the structure, absorption spectra, charge transfer (CT) process and its influencing factors, and provide a theoretical guideline for designing further photoactive layers of solar cells.

Comparison of Nuclear Spin Relaxation of H2O@C60 and H2@C60 and Their Nitroxide Derivatives

The successful synthesis of H2O@C60 makes possible the study of magnetic interactions of an isolated water molecule in a geometrically well-defined hydrophobic environment. Comparisons are made between the T1 values of H2O@C60 and the previously studied H2@C60 and their nitroxide derivatives. The value of T1 is approximately six times longer for H2O@C60 than for H2@C60 at room temperature, is independent of solvent viscosity or polarity, and increases monotonically with decreasing temperature, implying that T1 is dominated by the spin-rotation interaction. Paramagnetic nitroxides, either attached covalently to the C60 cage or added to the medium, produce strikingly similar T1 enhancements for H2O@C60 and H2@C60 that are consistent with through-space interaction between the internal nuclear spins and the external electron spin. This indicates that it should be possible to apply to the endo-H2O molecule the same methodologies for manipulating the ortho and para spin isomers that have proven successful for H2@C60.

Comparison of Nuclear Spin Relaxation of H2O@C60 and H2@C60 and Their Nitroxide Derivatives

The successful synthesis of H2O@C60 makes possible the study of magnetic interactions of an isolated water molecule in a geometrically well-defined hydrophobic environment. Comparisons are made between the T1 values of H2O@C60 and the previously studied H2@C60 and their nitroxide derivatives. The value of T1 is approximately six times longer for H2O@C60 than for H2@C60 at room temperature, is independent of solvent viscosity or polarity, and increases monotonically with decreasing temperature, implying that T1 is dominated by the spin-rotation interaction. Paramagnetic nitroxides, either attached covalently to the C60 cage or added to the medium, produce strikingly similar T1 enhancements for H2O@C60 and H2@C60 that are consistent with through-space interaction between the internal nuclear spins and the external electron spin. This indicates that it should be possible to apply to the endo-H2O molecule the same methodologies for manipulating the ortho and para spin isomers that have proven successful for H2@C60.

New diarylmethanofullerene derivatives and their properties for organic thin-film solar cells

A number of diarylmethanofullerene derivatives were synthesized. The cyclopropane ring of the derivatives has two aryl groups substituted with electron-withdrawing and -donating groups, the latter with long alkyl chains to improve solubility in organic solvents, an important property in processing cells. First reduction potentials of most derivatives were less negative than that of [6,6]-phenyl-C61-butyric acid methyl ester (PCBM), which is possibly ascribed to their electron-withdrawing nature. Organic thin-film photovoltaic cells fabricated with poly(3-hexylthiophene) (P3HT) as the electron-donor and diarylmethanofullerene derivatives as the electron-acceptor material were examined. The {(methoxycarbonyl)phenyl[bis(octyloxy)phenyl]methano}fullerene showed power conversion efficiency as high as PCBM, but had higher solubility in a variety of organic solvents than PCBM. The V(oc) value was higher than that of PCBM, which is derived from the electron-donating (octyloxy)phenyl group, possibly raising the LUMO level. Photovoltaic effects of the devices fabricated with the derivatives having some electron-withdrawing groups were also examined.