Utilizing the Undesirable Oxidation of Lead-Free Hybrid Halide Perovskite Nanosheets for Solar-Driven Photocatalytic C(sp3)─H Activation: Unraveling the Serendipity

Hybrid halide perovskites (HHPs), whose every branch generates intrusiveness, have been utilized in solar cells from a broader perspective. However, the inclusiveness of employing HHP as a photocatalyst is in its initial stage. This study mainly focuses on the unexpected utilization of, so far, undesirable material vacancy-ordered MA2SnBr6 quantum dots synthesized from MASnBr3 nanosheets. Here, the quantum confinement grounded a large blue shift in ultraviolet (UV) and photoluminescence (PL) spectra with a Stokes shift of 420 meV, where the band gap increase is observed as size decreases in MA2SnBr6. Remarkably, MA2SnBr6 exhibits air and moisture stability, better charge transfer, and high oxidation potential compared to MASnBr3. The first-principles-based atomistic computations reveal the strain relaxation in the Sn-Br framework that structurally stabilizes the MA2SnBr6 lattice. Furthermore, the direct band gap and strongly localized valence band edge give rise to a new potential photocatalyst MA2SnBr6 for efficient solar-driven C(sp3)─H activation of cyclohexane and toluene under ambient conditions.

Variable Temperature Behaviour of the Hybrid Double Perovskite MA2KBiCl6

Perovskite-related materials show very promising properties in many fields. Pb-free perovskites are particularly interesting, because of the toxicity of Pb. In this study, hybrid double perovskite MA₂KBiCl₆ (MA = methylammonium cation) was found to have interesting variable temperature behaviours. Both variable temperature single crystal X-ray diffraction, synchrotron powder diffraction, and Raman spectroscopy were conducted to reveal a rhombohedral to cubic phase transition at around 330 K and an order to disorder transition for inorganic cage below 210 K.

Lead-Free Solid-State Organic-Inorganic Halide Perovskite Electrolyte for Lithium-Ion Conduction

Exploring new solid electrolytes (SEs) for lithium-ion conduction is significant for the development of rechargeable all-solid-state lithium batteries. Here, a lead-free organic-inorganic halide perovskite, MASr_0.8Li_0.4Cl₃ (MA = methylammonium, CH₃NH₃ in formula), is reported as a new SE for Li-ion conduction due to its highly symmetric crystal structure, inherent soft lattice, and good tolerance for composition tunability. Via density functional theory calculations, we demonstrate that the hybrid perovskite framework can allow fast Li-ion migration without the collapse of the crystal structure. The influence of the lithium content in MASr_1-xLi_2xCl₃ (x = 0.1, 0.2, 0.3, or 0.4) on Li⁺ migration is systematically investigated. At the lithium content of x = 0.2, the MASr_0.8Li_0.4Cl₃ achieves the room-temperature lithium ionic conductivity of 7.0 × 10^-6 S cm^-1 with a migration energy barrier of ∼0.47 eV. The lithium-tin alloy (Li-Sn) symmetric cell exhibits stable electrochemical lithium plating/stripping for nearly 100 cycles, indicating the alloy anode compatibility of the MASr_0.8Li_0.4Cl₃ SE. This lead-free organic-inorganic halide perovskite SE will open a new avenue for exploring new SEs.

Highly Water-Stable Polymer-Perovskite Nanocomposites

The excellent performance of hybrid metal-halide perovskite nanocrystals (NCs) contrasts with their unsatisfactory stability in a high-humidity environment or water. Herein, polymer composite lead-halide perovskites (LHPs) NCs were prepared by casting or spin-coating to produce a high fluorescence yield and a fully water-resistant material. Poly(l-lactide) (PLla), polypropylene glycol (PPGly), and polysulfone (PSU) commercial polymers were used to prepare suspensions of MAPbBr₃-HDA NCs (MA: CH₃NH₃; HDA: hexadecylamine). The MAPbBr₃-HDA@PLla suspension exhibited a maximum fluorescence quantum yield of 93% compared to 43% for the pristine MAPbBr₃-HDA NCs. Strong emissions around 528 nm were also observed, with the same full width at half maximum value of 20 nm, demonstrating the successful fabrication of brightly luminescent LHP NCs@polymer combinations. Time-resolved photoluminescence measurements directly observed the enhanced spontaneous emission of the NCs induced by the polymeric environment. However, the cast films of MAPbBr₃-HDA NCs mixed with PLla or PPGly did not resist water immersion. On the contrary, MAPbBr₃-HDA@PPGly/PSU films containing well-dispersed ∼10 nm LHP NCs retained a bright green fluorescence emission even after 18 months under air conditions or water immersion up to 45 °C. From water contact angle measurements, profilometry, and X-ray photoelectron spectroscopy data, it could be assumed that the slightly hydrophobic PSU polymer is responsible for the high water stability of the fluorescent films, which avoids MAPbBr₃-HDA NC degradation. This work shows that the LHP NC dispersion in dissolved commodity polymers holds great promise toward the long-term stability of LHP NC composites for the future development of wearable electronic devices and other waterproof applications.

Solution-Grown Formamidinium Hybrid Perovskite (FAPbBr3) Single Crystals for α-Particle and γ-Ray Detection at Room Temperature

Compared with the widely reported MAPbBr₃ single crystals, formamidinium-based (FA-based) hybrid perovskites FAPbBr₃ (FPB) with superior chemical and structure stability are expected to be more efficient and perform as more reliable radiation detectors at room temperature. Here, we employ an improved inverse temperature crystallization method to grow FPB bulk single crystals, where issues associated with the retrograde solubility behavior are resolved. A crystal growth phase diagram has been proposed, and accordingly, growth parameters are optimized to avoid the formation of NH₄Pb₂Br₅ secondary phase. The resulting FPB crystals exhibit a high resistivity of 2.8 × 10⁹ Ω·cm and high electron and hole mobility-lifetime products (μτ) of 8.0 × 10^-4 and 1.1 × 10^-3 cm²·V^-1, respectively. Simultaneously, the electron and hole mobilities (μ) are evaluated to be 22.2 and 66.1 cm²·V^-1·s^-1, respectively, based on the time-of-flight technique. Furthermore, a Au/FPB SC/Au detector is constructed that demonstrates a resolvable gamma peak from 59.5 keV ²⁴¹Am γ-rays at room temperature for the first time. An energy resolution of 40.1% is obtained at 30 V by collecting the hole signals. These results demonstrate the great potential of FAPbBr₃ as a hybrid material for γ-ray spectroscopy and imaging.

Temperature-Dependent Ambipolar Charge Carrier Mobility in Large-Crystal Hybrid Halide Perovskite Thin Films

Perovskite-based thin-film solar cells today reach power conversion efficiencies of more than 22%. Methylammonium lead iodide (MAPI) is prototypical for this material class of hybrid halide perovskite semiconductors and at the focal point of interest for a growing community in research and engineering. Here, a detailed understanding of the charge carrier transport and its limitations by underlying scattering mechanisms is of great interest to the material's optimization and development. In this article, we present an all-optical study of the charge carrier diffusion properties in large-crystal MAPI thin films in the tetragonal crystal phase from 170 K to room temperature. We probe the local material properties of individual crystal grains within a MAPI thin film and find a steady decrease of the charge carrier diffusion constant with increasing temperature. From the resulting charge carrier mobility, we find a power law dependence of μ ∝ T ^m with m = -(1.8 ± 0.1). We further study the temperature-dependent mobility of the orthorhombic crystal phase from 50 to 140 K and observe a distinctly different exponent of m = -(1.2 ± 0.1).

Improve the Stability of Hybrid Halide Perovskite via Atomic Layer Deposition on Activated Phenyl-C61 Butyric Acid Methyl Ester

Atomic layer deposition (ALD) of oxide film on [6,6]-phenyl-C₆₁ butyric acid methyl ester (PCBM) shows a great promise to dramatically improve the ambient stability of hybrid halide perovskite. The nucleation of an ALD oxide on PCBM is critical to reliably apply this strategy. In this paper, we present the first study of the nucleation behavior of ALD oxides, including Al₂O₃ and ZnO, on PCBM. We find that PCBM film acts a gas diffusion barrier blocking the ALD reactants (diethyl zinc) from etching the underlying CH₃NH₃PbI₃. However, ZnO is not able to nucleate on PCBM. We further identify that trimethyl aluminum, a strongly Lewis acid, reacts readily with C═O on PCBM to generate a seeding layer for nucleating ZnO ALD. This new chemical route is highly reliable and can be used to synthesize ALD ZnO coatings over PCBM. The synthesized PCBM/Al₂O₃-ZnO dramatically improves the stability of CH₃NH₃PbI₃ against the ambience and even against liquid water. The result signifies the importance of understanding of nucleation of ALD in enabling reliable barrier coatings for hybrid halide perovskites.

Temperature-Dependent Polarization in Field-Effect Transport and Photovoltaic Measurements of Methylammonium Lead Iodide

While recent improvements in the reported peak power conversion efficiency (PCE) of hybrid organic-inorganic perovskite solar cells have been truly astonishing, there are many fundamental questions about the electronic behavior of these materials. Here we have studied a set of electronic devices employing methylammonium lead iodide ((MA)PbI3) as the active material and conducted a series of temperature-dependent measurements. Field-effect transistor, capacitor, and photovoltaic cell measurements all reveal behavior consistent with substantial and strongly temperature-dependent polarization susceptibility in (MA)PbI3 at temporal and spatial scales that significantly impact functional behavior. The relative PCE of (MA)PbI3 photovoltaic cells is observed to reduce drastically with decreasing temperature, suggesting that such polarization effects could be a prerequisite for high-performance device operation.

First-Principles Calculation of the Bulk Photovoltaic Effect in CH3NH3PbI3 and CH3NH3PbI(3-x)Cl(x)

Hybrid halide perovskites exhibit nearly 20% power conversion efficiency, but the origin of their high efficiency is still unknown. Here, we compute the shift current, a dominant mechanism of the bulk photovoltaic (PV) effect for ferroelectric photovoltaics, in CH₃NH₃PbI₃ and CH₃NH₃PbI(3-x)Cl(x) from first-principles. We find that these materials give approximately three times larger shift current PV response to near-IR and visible light than the prototypical ferroelectric photovoltaic BiFeO₃. The molecular orientations of CH₃NH₃⁺ can strongly affect the corresponding PbI₃ inorganic frame so as to alter the magnitude of the shift current response. Specifically, configurations with dipole moments aligned in parallel distort the inorganic PbI₃ frame more significantly than configurations with near-net-zero dipole, yielding a larger shift current response. Furthermore, we explore the effect of Cl substitution on shift current and find that Cl substitution at the equatorial site induces a larger response than does substitution at the apical site.