Harmonizing Thickness and Permeability in Bone Tissue Engineering: A Novel Silk Fibroin Membrane Inspired by Spider Silk Dynamics

Guided bone regeneration gathers significant interest in the realm of bone tissue engineering; however, the interplay between membrane thickness and permeability continues to pose a challenge that can be addressed by the water-collecting mechanism of spider silk, where water droplets efficiently move from smooth filaments to rough conical nodules. Inspired by the natural design of spider silk, an innovative silk fibroin membrane is developed featuring directional fluid transportation via harmoniously integrating a smooth, dense layer with a rough, loose layer; conical microchannels are engineered in the smooth and compact layer. Consequently, double-layered membranes with cone-shaped microporous passageways (CSMP-DSF membrane) are designed for in situ bone repair. Through extensive in vitro testing, it is noted that the CSMP-DSF membrane guides liquid flow from the compact layer's surface to the loose layer, enabling rapid diffusion. Remarkably, the CSMP-DSF membrane demonstrates superior mechanical properties and resistance to bacterial adhesion. When applied in vivo, the CSMP-DSF membrane achieves results on par with the commercial Bio-Gide collagen membranes. This innovative integration of a cross-thickness wetting gradient structure offers a novel solution, harmonizing the often-conflicting requirements of material transport, mechanical strength, and barrier effectiveness, while also addressing issues related to tissue engineering scaffold perfusion.

Gastrointestinal peristalsis-inspired hydrogel actuators for NIR-controlled transport of viscous liquids

Liquid transportation is fundamentally important in microfluidics, water collection, biosensing and printing, and has attracted enormous research interest in the past decades. However, despite substantial progress, it remains a big challenge to achieve the controlled transport of viscous liquids (>100 mPa∙s) commonly existing in daily life and the chemical industry. Inspired by the gastrointestinal peristalsis of mammalians that can efficiently transport viscous chyme (viscosity up to 2,000 mPa∙s) by the synergistic combination of contraction driving force and lubrication, this paper reports the design and construction of double-layered tubular hydrogel actuators for directional transport of highly viscous liquids ranging from ∼1000 mPa∙s to >80000 mPa∙s under the control of an applied 808 nm laser, which is attributed to the cooperation of outer layer contraction and water film lubrication of the inner layer. It's demonstrated that the actuators are capable of transporting polymerizing liquid whose viscosity significantly increases to ∼11182 mPa·s in 2 h. This work paves a new avenue towards directional transport of highly viscous liquids, which not only expands the research scope of liquid transportation, but will spur the design of new liquid actuators with potential applications in viscous liquid-based microfluidics, artificial blood vessels, and soft robots. This article is protected by copyright. All rights reserved.

Liquid Transport and Real-Time Dye Purification via Lotus Petiole-Inspired Long-Range-Ordered Anisotropic Cellulose Nanofibril Aerogels

Nowadays, large-scale oriented functional porous materials have been sought after by researchers. However, regulation of the long-range uniform and oriented structures of the material remains a challenge. Herein, ultralong anisotropic cellulose nanofibril (CNF) aerogels with uniformly ordered structures of pore walls inspired by lotus petioles were constructed by applying external speeds to counterbalance the growth driving forces of ice crystals. Based on the growth law of ice crystals, the ice crystals grew at a stable rate when the applied external speed was 0.04 mm/s, ensuring the consistent orientation of the large-scale CNF aerogel. The aerogel exhibited a rapid long-range directional transport ability to different liquid solvents, delivering ethanol up to 40 mm from bottom to top within 50 s. Moreover, by introducing rectorites with good cation-exchange properties, the resulting long-range composite possessed an enhanced adsorption capacity for methylene blue. Furthermore, aerogel successfully achieved real-time dye purification at a long distance, such as fast dye adsorption or selective adsorption. This flexible and straightforward strategy of fabricating ultralong oriented CNF aerogel materials is expected to promote the development of functional aerogels in directional liquid transport and sewage treatment.

Stretch-Enhanced Anisotropic Wetting on Transparent Elastomer Film for Controlled Liquid Transport

Direction-controlled wetting surfaces, special for lubricating oil infused anisotropic surfaces, have attracted great research interest in directional liquid collection, expelling, transfer, and separation. Nonetheless, there are still existing difficulties in achieving directional and continuous liquid transport. Herein, we present a strategy to achieve directional liquid transport on transparent lubricating oil infused elastomer film with V-shaped prisms microarray (VPM). The results reveal that the water wetting direction in the parallel and staggered arrangement of the VPM structure surface with lubricating oil infusion is the opposite, which is completely different from the wetting direction on the usual VPM surface in air. Moreover, asymmetric stretching can enhance or weaken the directional water wetting tendency on the lubricating oil infused VPM elastomer film and even can reverse the droplet wetting direction. In a closed moist environment, tiny droplets gradually coalesce and then slip away from the lubricating oil infused VPM surface to keep the surface transparent, due to the cooperation of imbalanced Laplace pressure, resulting from the anisotropic geometric structures, varying VPMs spacing, and gravity. Thus, this work provides a paradigm to design and fabricate a type of surface engineering material in the application fields of directional expelling, liquid collection, anti-biofouling, anti-icing, drag reduction, anticorrosion, etc.

Transport Phenomena in Nano/Molecular Confinements

The transport of fluid and ions in nano/molecular confinements is the governing physics of a myriad of embodiments in nature and technology including human physiology, plants, energy modules, water collection and treatment systems, chemical processes, materials synthesis, and medicine. At nano/molecular scales, the confinement dimension approaches the molecular size and the transport characteristics deviates significantly from that at macro/micro scales. A thorough understanding of physics of transport at these scales and associated fluid properties is undoubtedly critical for future technologies. This compressive review provides an elaborate picture on the promising future applications of nano/molecular transport, highlights experimental and simulation metrologies to probe and comprehend this transport phenomenon, discusses the physics of fluid transport, tunable flow by orders of magnitude, and gating mechanisms at these scales, and lists the advancement in the fabrication methodologies to turn these transport concepts into reality. Properties such as chain-like liquid transport, confined gas transport, surface charge-driven ion transport, physical/chemical ion gates, and ion diodes will provide avenues to devise technologies with enhanced performance inaccessible through macro/micro systems. This review aims to provide a consolidated body of knowledge to accelerate innovation and breakthrough in the above fields.

Wood-Derived Hybrid Scaffold with Highly Anisotropic Features on Mechanics and Liquid Transport toward Cell Migration and Alignment

Fantastic structures in nature have inspired much incredible research. Wood, a typical model of anisotropy and hierarchy, has been widely investigated for its mechanical properties and water extraction abilities, although applications in biological areas remain challenging. Delignified wood composite with in situ deposited hydroxyapatite (HAp) and infiltrated polycaprolactone (PCL) is hereby fabricated in an attempt to mimic natural bone. The inherent structure and properties of wood are carefully preserved during the fabrication, showing anisotropic mechanical properties in the radial direction (420 MPa) and longitudinal direction (20 MPa). In addition, it also performs directional liquid transport, effectively inducing the migration and alignment of cells to simulate the uniform seeding behavior of various cells in natural bone. Moreover, the synergistic effect of blended HAp and PCL largely promotes cell proliferation and osteogenic differentiation, providing a promising candidate for bone regeneration materials.

Switchable Direction of Liquid Transport via an Anisotropic Microarray Surface and Thermal Stimuli

Design and construction of special surface microstructures has made many amazing breakthroughs in directional liquid transport. Despite much progress in this field, challenges still remain in on-demand switchable direction transport of liquid in situ and real-time via transforming the arrangement of the surface microstructure and external stimuli. Herein, we demonstrate a strategy to achieve switchable direction transport of liquid via a tunable anisotropic microarray surface, that is, assembling a V-shaped prism microarray (VPM) surface, which can also be intelligently manipulated by thermal stimuli. By transforming the parallel and staggered prism microstructure arrangement of the VPM, switchable direction transport of a liquid can be successfully achieved on the VPM surface. Flow direction switching among unidirectional transport, bidirectional transport, and reverse unidirectional transport is also achieved on the temperature-adaptive VPM surface by thermal stimuli, which can be used for on-demand liquid transport according to the paths of the microfluidic channels. The work provides a way for precise liquid manipulation in desired liquid transport, which may be utilized in nonpower conveying systems, autolubrication, life fluid medical instruments, and other microfluidic devices.

Modeling multi-needle injection into solid tumor

The discovery of mechanisms by which the cancer cells avoid the host immune attack (immune checkpoints) as well the capability of the monoclonal antibodies (mAbs) to blockade the checkpoint proteins on cancer and tumor-infiltrating cells (CTLA-4, PD-1, and PD-L1) promised new breakthroughs in the cure of cancer. After these mechanisms of cancer escaping the host immunity were undoubtedly confirmed in numerous experimental and clinical studies, the FDA approval of CTLA-4 and PD-1/PD-L1 mAbs for systemic treatment thought to revolutionize the outcome of cancer treatment. However, as of today, the anticipated curative effect of anti-CTLA-4 and PD-1/PD-L1 mAb treatments has been observed only in a small population of patients. In addition, systemic administration of mAbs in clinics has been found associated with new toxicity profiles, sometimes very severe. The main obstacle that hinders the mAbs therapy appears to be the inability of delivering mAbs to a sufficient number of cancer cells and tumor infiltrating cells. As an alternative to the systemic administration (or as a complement to it), local intratumoral delivery of mAbs has been anticipated to resolve that issue. However, unlike the systemic mAbs administration, for which formidable but surmountable obstacles (big size of mAbs ~150 kD, high interstitial fluid pressure in solid tumors, etc.) have been known to hamper mAbs delivery to cancer and tumor-infiltrating cells, the lack of effects of intratumoral mAbs administration remains completely incomprehensible and needs a new theoretical reconsideration that we have attempted in our analysis. It can be suggested that the limited benefits of the intratumoral mAbs administration appeared to be rooted in the same problem that hindered the effects of systemic mAbs administration: the inability to reach a sufficient number of cancer cells and tumor-infiltrating cells. We hypothesize that the core of the problem stems from the fact that the single-needle intratumoral injection forms a very localized, jet-like distribution of the drug (mAbs) that constitutes only a small fraction of the total volume of the tumor. In this light we are re-evaluating the theoretical reasonableness of the single-needle intratumoral injection approach. We propose that multi-needle injection will circumvent this limitation and for that we analyze the behavior of an injectant in tissues using different configurations of the injection needles. To accomplish this goal, we created a model of injectant distribution in a solid tissue based on the traditional technique of single-needle injection and then extended that model to a case of simultaneous multi-needle injection. To develop the model of drug delivery and transport in biological tissues, we followed a frequently used approach of modeling the diffusive transport of liquid through a porous media using the Darcy's law that relates the flow velocity, the pressure gradient, and the tissue permeability. The analysis demonstrates that a multi-needle injection setup provides a significantly more widespread and homogeneous injectant distribution within a solid tumor than that for a single needle injection for the same tumor size. Adding separate draining needles can further improve the delivery of injectant to cancer and tumor-infiltrating cells.

Diffusion-Freezing-Induced Microphase Separation for Constructing Large-Area Multiscale Structures on Hydrogel Surfaces

Hydrogels with multiscale structured surface have attracted significant attention for their valuable applications in diverse areas. However, current strategies for the design and fabrication of structured hydrogel surfaces, which suffer from complicated manufacturing processes and specific material modeling, are not efficient to produce structured hydrogel surfaces in large area, and therefore restrict their practical applications. To address this problem, a general and reliable method is reported, which relies on the interplay between polymer chain diffusion and the subsequent freezing-induced gelation and microphase separation processes. The basic idea is systematically analyzed and further exploited to manufacture gel surfaces with gradient structures and patterns through the introduction of temperature gradient and shape control of the contact area. Moreover, the formed micro/nanostructured surfaces are exemplified to work as capillary systems and thus can uplift the liquid spontaneously indicating the potential application for anti-dehydration. It is believed that the proposed facile and large-area fabrication method can inspire the design of materials with various functionalized surfaces.

Magnetic Actuation of Drops and Liquid Marbles Using a Deformable Paramagnetic Liquid Substrate

The magnetic actuation of deposited drops has mainly relied on volume forces exerted on the liquid to be transported, which is poorly efficient with conventional diamagnetic liquids such as water and oil, unless magnetosensitive particles are added. Herein, we describe a new and additive‐free way to magnetically control the motion of discrete liquid entities. Our strategy consists of using a paramagnetic liquid as a deformable substrate to direct, using a magnet, the motion of various floating liquid entities, ranging from naked drops to liquid marbles. A broad variety of liquids, including diamagnetic (water, oil) and nonmagnetic ones, can be efficiently transported using the moderate magnetic field (ca. 50 mT) produced by a small permanent magnet. Complex trajectories can be achieved in a reliable manner and multiplexing potential is demonstrated through on‐demand drop fusion. Our paramagnetofluidic method advantageously works without any complex equipment or electric power, in phase with the necessary development of robust and low‐cost analytical and diagnostic fluidic devices.

Hydrophilic Sponges for Leaf-Inspired Continuous Pumping of Liquids

A bio-inspired, leaf-like pumping strategy by mimicking the transpiration process through leaves is developed for autonomous and continuous liquid transport enabled by durable hydrophilic sponges. Without any external power sources, flows are continuously generated ascribed to the combination of capillary wicking and evaporation of water. To validate this method, durable hydrophilic polydimethylsiloxane sponges modified with polyvinyl alcohol via a "dip-coat-dry" method have been fabricated, which maintains hydrophilicity more than 2 months. The as-made sponges are further applied to achieve stable laminar flow patterns, chemical gradients, and "stop-flow" manipulation of the flow in microfluidic devices. More importantly, the ease-of-operation and excellent pumping capacity have also been verified with over 24 h's pumping and quasi-stable high flow rates up to 15 µL min-1. The present strategy can be easily integrated to other miniaturized systems requiring pressure-driven flow and should have potential applications, such as cell culture, micromixing, and continuous flow reaction.

Fast Responsive and Controllable Liquid Transport on a Magnetic Fluid/Nanoarray Composite Interface

Controllable liquid transport on surface is expected to occur by manipulating the gradient of surface tension/Laplace pressure and external stimuli, which has been intensively studied on solid or liquid interface. However, it still faces challenges of slow response rate, and uncontrollable transport speed and direction. Here, we demonstrate fast responsive and controllable liquid transport on a smart magnetic fluid/nanoarray interface, i.e., a composite interface, via modulation of an external magnetic field. The wettability of the composite interface to water instantaneously responds to gradient magnetic field due to the magnetically driven composite interface gradient roughness transition that takes place within a millisecond, which is at least 1 order of magnitude faster than that of other responsive surfaces. A water droplet can follow the motion of the gradient composite interface structure as it responds to the gradient magnetic field motion. Moreover, the water droplet transport direction can be controlled by modulating the motion direction of the gradient magnetic field. The composite interface can be used as a pump for the transport of immiscible liquids and other objects in the microchannel, which suggests a way to design smart interface materials and microfluidic devices.

Preparation and Transport Performances of High-Density, Aligned Carbon Nanotube Membranes

We report a simple and effective method for the preparation of high-density and aligned carbon nanotube (CNT) membranes. The CNT arrays were prepared by water-assisted chemical vapor deposition (CVD) and were subsequently pushed over and stacked into dense membranes by mechanical rolling. It was demonstrated that various gases and liquids, including H2, He, N2, O2, Ar, water, ethanol, hexane, and kerosene, could effectively pass through the aligned carbon nanotube membranes. The membranes exhibited different selections on different gases, indicating that there was a separation potential for the gas mixtures. The selectivities (H2 relative to other gases) of H2/He, H2/N2, H2/O2, and H2/Ar were found to be lower than that of the ideal Knudsen model. For pure water, the permeability was measured to be 3.23 ± 0.05 ml·min(-1)·cm(-2) at 1 atm, indicating that the CNT membranes were promising for applications in liquid filtration and separation.

Selective, Spontaneous One-Way Oil-Transport Fabrics and Their Novel Use for Gauging Liquid Surface Tension

Thin porous materials that can spontaneously transport oil fluids just in a single direction have great potential for making energy-saving functional membranes. However, there is little data for the preparation and functionalities of this smart material. Here, we report a novel method to prepare one-way oil-transport fabrics and their application in detecting liquid surface tension. This functional fabric was prepared by a two-step coating process to apply flowerlike ZnO nanorods, fluorinated decyl polyhedral oligomeric silsesquioxanes, and hydrolyzed fluorinated alkylsilane on a fabric substrate. Upon one-sided UV irradiation, the coated fabric shows a one-way transport feature that allows oil fluid transport automatically from the unirradiated side to the UV-irradiated surface, but it stops fluid transport in the opposite direction. The fabric still maintains high superhydrophobicity after UV treatment. The one-way fluid transport takes place only for the oil fluids with a specific surface tension value, and the fluid selectivity is dependent on the UV treatment time. Changing the UV irradiation time from 6 to 30 h broadened the one-way transport for fluids with surface tension from around 22.3 mN/m to a range of 22.3-56.7 mN/m. We further proved that this selective one-way oil transport can be used to estimate the surface tension of a liquid simply by observing its transport feature on a series of fabrics with different one-way oil-transport selectivities. To our knowledge, this is the first example to use one-way fluid-transport materials for testing the liquid surface tension. It may open up further theoretical studies and the development of novel fluid sensors.

Visualization of water drying in porous materials by X-ray phase contrast imaging

We present in this study results from X-ray tomographic microscopy with synchrotron radiation performed both in attenuation and phase contrast modes on a limestone sample during two stages of water drying. No contrast agent was used in order to increase the X-ray attenuation by water. We show that only by using the phase contrast mode it is possible to achieve enough water content change resolution to investigate the drying process at the pore-scale. We performed 3D image analysis of the time-differential phase contrast tomogram. We show by the results of such analysis that it is possible to obtain a reliable characterization of the spatial redistribution of water in the resolved pore system in agreement with what expected from the theory of drying in porous media and from measurements performed with other approaches. We thus show the potential of X-ray phase contrast imaging for pore-scale investigations of reactive water transport processes which cannot be imaged by adding a contrast agent for exploiting the standard attenuation contrast imaging mode.

Liquid transmission characteristics of padding bandages under pressure

Padding is an essential component in a multilayer compression bandaging system, used inside the compression bandage through which substantial amount of pressure is exerted on the limb of patient for treatment of venous leg ulcers. As a result, the liquid transmission behavior of padding is also critical in managing body fluids or sweat exuded from the affected limb, reducing the excessive moisture build-up around the wound and thereby ensuring comfort to and hence a better compliance from the patients. This study investigates the in-plane fluid transport characteristics of needle-punched nonwoven padding bandages. It first reviewed the existing studies related to the problems, and discussed their limits and possible improvements in dealing with complex fluid transport issues in textile porous media. The measurement of fluid transport under different pressure levels was then done using a newly designed apparatus capable of simultaneously tracing the liquid in-plane spreading along different directions, and obtaining several transport characteristics of a testing sample, e.g. the liquid flow anisotropy, the rate of movement, the area of wet surface with time, etc. Also the effects of several important factors, such as the levels of pressure applied, the specimen bulk density, and needling density of the padding products, have been experimentally investigated. In addition, based on an extended Lucas-Washburn theory, we calculated the liquid flow distance, both instantaneous speed and a more useful time-averaged speed v(av) at any given direction, and also defined a flow anisotropy index I(A) as a convenient parameter to represent the material flow anisotropy. The applications of v(av) and I(A) to actual samples have demonstrated the usefulness of these parameters in characterizing the flow nature and behavior of the materials.