En route to next-generation nerve repair: static passive magnetostimulation modulates neurite outgrowth

Objective. Regeneration of damaged nerves is required for recovery following nervous system injury. While neural cell behavior may be modified by neuromodulation techniques, the impact of static direct current (DC) magnetic stimulation remains unclear.Approach. This study quantifies the effects of DC magnetostimulation on primary neuronal outgrowthin vitro. The extension of neurites of dorsal root ganglia (DRG) subjected to two different low-strength (mT) static magnetic flux configurations was investigated.Main results. After 3 d of 1 h in-plane (IP) magnetic field stimulation, a 62.5% increase in neurite outgrowth area was seen relative to unstimulated controls. The combined action of in-plane + out-of-plane (IP + OOP) magnetic field application produced a directional outgrowth bias parallel to the IP field direction. At the same time, the diverse magnetic field conditions produced no changes in two soluble neurotrophic factors, nerve growth factor and brain-derived neurotrophic factor, released from resident glia.Significance. These results demonstrate the potential for DC magnetostimulation to enhance neuronal regrowth and improve clinical outcomes.

Scalable Thousand Channel Penetrating Microneedle Arrays on Flex for Multimodal and Large Area Coverage BrainMachine Interfaces

The Utah array powers cutting-edge projects for restoration of neurological function, such as BrainGate, but the underlying electrode technology has itself advanced little in the last three decades. Here, advanced dual-side lithographic microfabrication processes is exploited to demonstrate a 1024-channel penetrating silicon microneedle array (SiMNA) that is scalable in its recording capabilities and cortical coverage and is suitable for clinical translation. The SiMNA is the first penetrating microneedle array with a flexible backing that affords compliancy to brain movements. In addition, the SiMNA is optically transparent permitting simultaneous optical and electrophysiological interrogation of neuronal activity. The SiMNA is used to demonstrate reliable recordings of spontaneous and evoked field potentials and of single unit activity in chronically implanted mice for up to 196 days in response to optogenetic and to whisker air-puff stimuli. Significantly, the 1024-channel SiMNA establishes detailed spatiotemporal mapping of broadband brain activity in rats. This novel scalable and biocompatible SiMNA with its multimodal capability and sensitivity to broadband brain activity will accelerate the progress in fundamental neurophysiological investigations and establishes a new milestone for penetrating and large area coverage microelectrode arrays for brain-machine interfaces.

Miniaturized Multispectral Detector Derived from Gradient Response Units on Single MAPbX3 Microwire

Miniaturized multispectral detectors are urgently desired given the unprecedented prosperity of smart optoelectronic chips for integrated functions including communication, imaging, scientific analysis, etc. However, multispectral detectors require complicated prism optics or interference/interferometric filters for spectral recognition, which hampers the miniaturization and their subsequent integration in photonic integrated circuits. In this work, inspired by the advance of computational imaging, optical-component-free miniaturized multispectral detector on 4 mm gradient bandgap MAPbX₃ microwire with a diameter of 30 µm, is reported. With accurate composition engineering, halide ions in MAPbX₃ microwire vary from Cl to I giving in the gradual variation of optical bandgap from 2.96 to 1.68 eV along axis. The sensing units on MAPbX₃ microwire offer the response edge ranging from 450 to 790 nm with the responsivity over 20 mA W^-1 , -3dB width over 450 Hz, LDR of ≈60 dB, and a noise current less than ≈1.4 × 10^-12 A Hz^-0.5 . As a result, the derived miniaturized detector achieves the function of multispectral sensing and discrimination with spectral resolution of ≈25 nm and mismatch of ≈10 nm. Finally, the proof-of-concept colorful imaging is successfully conducted with the miniaturized multispectral detector to further confirm its application in spectral recognition.

In Situ Magnetic Alignment of a Slurry of Tandem Semiconductor Microwires Using a Ni Catalyst

Slurries of semiconductor particles individually capable of unassisted light-driven water-splitting are modeled to have a promising path to low-cost solar hydrogen generation, but they have had poor efficiencies. Tandem microparticle systems are a clear direction to pursue to increase efficiency. However, light absorption must be carefully managed in a tandem to prevent current mismatch in the subcells, which presents a possible challenge for tandem microwire particles suspended in a liquid. In this work, a Ni-catalyzed Si/TiO₂ tandem microwire slurry is used as a stand-in for an ideal bandgap combination to demonstrate proof-of-concept in situ alignment of unassisted water-splitting microwires with an external magnetic field. The Ni hydrogen evolution catalyst is selectively photodeposited at the exposed Si microwire core to serve as the cathode site as well as a handle for magnetic orientation. The frequency distribution of the suspended microwire orientation angles is determined as a function of magnetic field strength under dispersion with and without uplifting microbubbles. After magnetizing the Ni bulb, tandem microwires can be highly aligned in water under a magnetic field despite active dispersion from bubbling or convection.

Antisolvent-Processed One-Dimensional Ternary Rubidium Copper Bromine Microwires for Sensitive and Flexible Ultraviolet Photodetectors

Recently, newly emerging halide perovskites have aroused intensive attention in photoelectric fields in virtue of their good properties, such as well-balanced carrier transport, large light absorption coefficient, tunable band gap, and low-temperature solution processing technique. Nevertheless, their future commercial development is severely hampered by lead toxicity and instability of such materials. In this work, one-dimensional Rb₂CuBr₃ single-crystal microwires (MWs) were prepared by antisolvent engineering, and they were further employed as absorbers to prepare sensitive ultraviolet (UV) photodetectors. The optical band gap of Rb₂CuBr₃ MWs is measured to be 3.83 eV, exhibiting an excellent UV absorption. The fabricated device demonstrates a remarkable UV light detection ability with a specific detectivity of 1.23 × 10¹¹ Jones, responsivity of 113.64 mA W^-1, and response speed of 69.31/87.55 ms under light illumination of 265 nm. Meanwhile, the proposed photodetector without any encapsulation shows outstanding stability and repeatability. After storing in ambient air for 2 weeks, the light detection ability remains basically unchanged. Further, a flexible photodetector was fabricated with the same structure, which demonstrates a remarkable bending endurance. These results confirm the great potential of Rb₂CuBr₃ for high-performance UV photodetectors, increasing the possibility for assembly of optoelectronic systems.

The Deformation Behavior and Bending Emissions of ZnO Microwire Affected by Deformation-Induced Defects and Thermal Tunneling Effect

The realization of electrically pumped emitters at micro and nanoscale, especially with flexibility or special shapes is still a goal for prospective fundamental research and application. Herein, zinc oxide (ZnO) microwires were produced to investigate the luminescent properties affected by stress. To exploit the initial stress, room temperature in situ elastic bending stress was applied on the microwires by squeezing between the two approaching electrodes. A novel unrecoverable deformation phenomenon was observed by applying a large enough voltage, resulting in the formation of additional defects at bent regions. The electrical characteristics of the microwire changed with the applied bending deformation due to the introduction of defects by stress. When the injection current exceeded certain values, bright emission was observed at bent regions, ZnO microwires showed illumination at the bent region priority to straight region. The bent emission can be attributed to the effect of thermal tunneling electroluminescence appeared primarily at bent regions. The physical mechanism of the observed thermoluminescence phenomena was analyzed using theoretical simulations. The realization of electrically induced deformation and the related bending emissions in single microwires shows the possibility to fabricate special-shaped light sources and offer a method to develop photoelectronic devices.

Hydrogen-Bonded Organic Framework Microlasers with Conformation-Induced Color-Tunable Output

Porous organic frameworks have emerged as the promising platforms to construct tunable microlasers. Most of these microlasers are achieved from metal-organic frameworks via meticulously accommodating the laser dyes with the sacrifice of the pore space, yet they often suffer from the obstacles of either relatively limited gain concentration or sophisticated fabrication techniques. Herein, we reported on the first hydrogen-bonded organic framework (HOF) microlasers with color-tunable performance based on conformation-dependent stimulated emissions. Two types of HOF microcrystals with the same gain lumnogen as the building block were synthesized via a temperature-controlled self-assembly method. The distinct frameworks offer different conformations of the gain building block, which lead to great impacts on their conjugation degrees and excited-state processes, resulting in remarkably distinct emission colors (blue and green). Accordingly, blue/green-color lasing actions were achieved in these two types of HOFs based on well-faceted assembled wire-like cavities. These results offer a deep insight on the exploitation of HOF-based miniaturized lasers with desired nanophotonics performances.

The Argo: a high channel count recording system for neural recording in vivo

OBJECTIVE

Decoding neural activity has been limited by the lack of tools available to record from large numbers of neurons across multiple cortical regions simultaneously with high temporal fidelity. To this end, we developed the Argo system to record cortical neural activity at high data rates.

APPROACH

Here we demonstrate a massively parallel neural recording system based on platinum-iridium microwire electrode arrays bonded to a CMOS voltage amplifier array. The Argo system is the highest channel count in vivo neural recording system, supporting simultaneous recording from 65 536 channels, sampled at 32 kHz and 12-bit resolution. This system was designed for cortical recordings, compatible with both penetrating and surface microelectrodes.

MAIN RESULTS

We validated this system through initial bench testing to determine specific gain and noise characteristics of bonded microwires, followed by in-vivo experiments in both rat and sheep cortex. We recorded spiking activity from 791 neurons in rats and surface local field potential activity from over 30 000 channels in sheep.

SIGNIFICANCE

These are the largest channel count microwire-based recordings in both rat and sheep. While currently adapted for head-fixed recording, the microwire-CMOS architecture is well suited for clinical translation. Thus, this demonstration helps pave the way for a future high data rate intracortical implant.

Primary Corrosion Processes for Polymer-Embedded Free-Standing or Substrate-Supported Silicon Microwire Arrays in Aqueous Alkaline Electrolytes

Solar fuel devices have shown promise as a sustainable source of chemical fuels. However, long-term stability of light absorbing materials remains a substantial barrier to practical devices. Herein, multiple corrosion pathways in 1 M KOH(aq) have been defined for TiO₂-protected Si microwire arrays in a polymer membrane either attached to a substrate or free-standing. Top-down corrosion was observed in both morphologies through defects in the TiO₂ coating. For the substrate-based samples, bottom-up corrosion was observed through the substrate and up the adjacent wires. In the free-standing samples, uniform bottom-up corrosion was observed through the membrane with all wire material corroded within 10 days of immersion in the dark in 1 M KOH(aq).

Twin-jet electropolishing for damage-free transmission electron microscopy specimen preparation of metallic microwires

A method to prepare TEM specimens from metallic microwires and based on conventional twin-jet electropolishing is introduced. The wire is embedded in an opaque epoxy resin medium and the hardened resin is mechanically polished to reveal the wire on both sides. The resin containing wire is then cut into discs of the appropriate size. The obtained embedded wire is electropolished in a conventional twin-jet electropolishing machine until electron transparency in large areas without radiation damage is achieved.

Perovskite Single-Crystal Microwire-Array Photodetectors with Performance Stability beyond 1 Year

Compared with thin-film morphology, 1D perovskite structures such as micro/nanowires with fewer grain boundaries and lower defect density are very suitable for high-performance photodetectors with higher stability. Although the stability of perovskite microwire-based photodetectors has been substantially enhanced in comparison with that of photodetectors based on thin-film morphology, practical applications require further improvements to the stability before implementation. In this study, a template-assisted method is developed to prepare methylammonium lead bromide (MAPbBr₃ ) micro/nanowire structures, which are encapsulated in situ by a protective hydrophobic molecular layer. The combination of the protective layer, high crystalline quality, and highly ordered microstructures significantly improve the stability of the MAPbBr₃ single-crystal microwire arrays. Consequently, these MAPbBr₃ single-crystal microwire-array-based photodetectors exhibit significant long-term stability, maintaining 96% of the initial photocurrent after 1 year without further encapsulation. The lifetime of such photodetectors is hence approximately four times longer than that of the most stable previously reported perovskite micro/nanowire-based photodetector; this is thought to be the most stable perovskite photodetector reported thus far. Furthermore, this work should contribute further toward the realization of perovskite 1D structures with long-term stability.

Magnetic field-induced magnetostructural transition and huge tensile superelasticity in an oligocrystalline Ni-Cu-Co-Mn-In microwire

Meta-magnetic shape-memory alloys combine ferroelastic order with ferromagnetic order and exhibit attractive multifunctional properties, but they are extremely brittle, showing hardly any tensile deformability, which impedes their practical application. Here, for the first time, an Ni-Cu-Co-Mn-In microwire has been developed that simultaneously exhibits a magnetic field-induced first-order meta-magnetic phase transition and huge tensile superelasticity. A temperature-dependent in situ synchrotron high-energy X-ray diffraction investigation reveals that the martensite of this Ni43.7Cu1.5Co5.1Mn36.7In13 microwire shows a monoclinic six-layered modulated structure and the austenite shows a cubic structure. This microwire exhibits an oligocrystalline structure with bamboo grains, which remarkably reduces the strain incompatibility during deformation and martensitic transformation. As a result, huge tensile superelasticity with a recoverable strain of 13% is achieved in the microwire. This huge tensile superelasticity is in agreement with our theoretical calculations based on the crystal structure and lattice correspondence of austenite and martensite and the crystallographic orientation of the grains. Owing to the large magnetization difference between austenite and martensite, a pronounced magnetic field-induced magnetostructural transition is achieved in the microwire, which could give rise to a variety of magnetically driven functional properties. For example, a large magnetocaloric effect with an isothermal entropy change of 12.7 J kg-1 K-1 (under 5 T) is obtained. The realization of magnetic-field- and tensile-stress-induced structural transformations in the microwire may pave the way for exploiting the multifunctional properties under the coupling of magnetic field and stress for applications in miniature multifunctional devices.

Formation of Single Micro- and Nanowires with Extreme Aspect Ratios in Microfluidic Channels

Shown here is the site-specific formation of single extraordinarily long metal-organic micro- and nanowires using a microfluidic device made of poly(dimethylsiloxane) (PDMS). This approach exploits two concepts, i) the diffusion of organic precursor molecules through PDMS and ii) the use of microfluidic channels as a growth template. To initiate wire formation, metal and organic precursor solutions are filled into different supply channels that are separated by PDMS. As the precursor diffuses through PDMS, and thereby infiltrates the adjacent channel, the growth of micro- and nanowires starts at the side walls of this adjacent channel. The formation yields single wires with sizes ranging from several hundreds of micrometers to millimeters at diameters of 0.5-2 µm. The principles of this formation pathway are demonstrated with the reaction of tetrathiafulvalene (TTF) and gold(III) ions that yields Au-TTF wires. The influence of various reaction parameters including the choice of solvents and the chip fabrication protocol on the reaction are evaluated. Based on these findings, a further microfluidic device design with orthogonally arranged channels is developed, and the formation of single wires in a channel-defined pattern is demonstrated. Moreover, the possibility of pulsed precursor supply allows for advanced control over the growth of the wires.

Scattering of Microwaves by a Passive Array Antenna Based on Amorphous Ferromagnetic Microwires for Wireless Sensors with Biomedical Applications

Co-based amorphous microwires presenting the giant magnetoimpedance effect are proposed as sensing elements for high sensitivity biosensors. In this work we report an experimental method for contactless detection of stress, temperature, and liquid concentration with application in medical sensors using the giant magnetoimpedance effect on microwires in the GHz range. The method is based on the scattering of electromagnetic microwaves by FeCoSiB amorphous metallic microwires. A modulation of the scattering parameter is achieved by applying a magnetic bias field that tunes the magnetic permeability of the ferromagnetic microwires. We demonstrate that the OFF/ON switching of the bias activates or cancels the amorphous ferromagnetic microwires (AFMW) antenna behavior. We show the advantages of measuring the performing time dependent frequency sweeps. In this case, the AC-bias modulation of the scattering coefficient versus frequency may be clearly appreciated. Furthermore, this modulation is enhanced by using arrays of microwires with an increasing number of individual microwires according to the antenna radiation theory. Transmission spectra show significant changes in the range of 3 dB for a relatively weak magnetic field of 15 Oe. A demonstration of the possibilities of the method for biomedical applications is shown by means of wireless temperature detector from 0 to 100 °C.

Multi-Scale Modeling and Simulation of Thermoplastic Automated Tape Placement: Effects of Metallic Particles Reinforcement on Part Consolidation

This paper concerns engineered composites integrating metallic particles to enhance thermal and electrical properties. However, these properties are strongly dependent on the forming process itself that determines the particle distribution and orientation. At the same time, the resulting enhanced thermal properties affect the reinforced resin viscosity whose flow is involved in the intimate contact evolution. Thus, a subtle and intricate coupling appears, and the process cannot be defined by ignoring it. In this paper, we analyze the effects of particle concentration and orientation on the process and processability. For this purpose, three main models are combined: (i) a multi-scale surface representation and its evolution, by using an appropriate numerical model; (ii) flow-induced orientation, and (iii) the impact of the orientation state on the homogenized thermal conductivity.

Patterned Arrays of Functional Lateral Heterostructures via Sequential Template-Directed Printing

The precise integration of microscale dots and lines with controllable interfacing connections is highly important for the fabrication of functional devices. To date, the solution-processible methods are used to fabricate the heterogeneous micropatterns for different materials. However, for increasingly miniaturized and multifunctional devices, it is extremely challenging to engineer the uncertain kinetics of a solution on the microstructures surfaces, resulting in uncontrollable interface connections and poor device performance. Here, a sequential template-directed printing process is demonstrated for the fabrication of arrayed microdots connected by microwires through the regulation of the Rayleigh-Taylor instability of material solution or suspension. Flexibility in the control of fluidic behaviors can realize precise interface connection between the micropatterns, including the microwires traversing, overlapping or connecting the microdots. Moreover, various morphologies such as circular, rhombic, or star-shaped microdots as well as straight, broken or curved microwires can be achieved. The lateral heterostructure printed with two different quantum dots displays bright dichromatic photoluminescence. The ammonia gas sensor printed by polyaniline and silver nanoparticles exhibits a rapid response time. This strategy can construct heterostructures in a facile manner by eliminating the uncertainty of the multimaterials interface connection, which will be promising for the development of novel lateral functional devices.

Inkjet-Printed Photodetector Arrays Based on Hybrid Perovskite CH3NH3PbI3 Microwires

Hybrid perovskite CH₃NH₃PbI₃ has attracted extensive research interests in optoelectronic devices in recent years. Herein an inkjet printing method has been employed to deposit a perovskite CH₃NH₃PbI₃ layer. By choosing the proper solvent and controlling the crystal growth rate, hybrid perovskite CH₃NH₃PbI₃ nanowires, microwires, a network, and islands were synthesized by means of inkjet printing. Electrode-gap-electrode lateral-structured photodetectors were fabricated with these different crystals, of which a hybrid perovskite microwire-based photodetector would balance the uniformity and low defects to obtain a switching ratio of 16000%, responsivity of 1.2 A/W, and normalized detectivity of 2.39 × 10¹² Jones at a light power density of 0.1 mW/cm². Furthermore, the hybrid perovskite microwire-based photodetector arrays were fabricated and applied in an imaging sensor, from which the clear mapping of the light source signal was successfully obtained. This work paves the way for the realization of low-cost, solution-processed, and high-performance hybrid perovskite-based photodetector arrays.

Persistent Single-Neuron Activity during Working Memory in the Human Medial Temporal Lobe

Working memory is an essential component of human cognition. Persistent activity related to working memory has been reported in many brain areas, including the inferior temporal and prefrontal cortex [1-8]. The medial temporal lobe (MTL) contains "concept cells" that respond invariantly to specific individuals or places whether presented as images, text, or speech [9, 10]. It is unknown, however, whether the MTL also participates in working memory processes. We thus sought to determine whether human MTL neurons respond to images held in working memory. We recorded from patients with chronically intractable epilepsy as they performed a task that required them to remember three or four sequentially presented pictures across a brief delay. 48% of visually selective neurons continued to carry image-specific information after image offset, but most ceased to encode previously presented images after a subsequent presentation of a different image. However, 8% of visually selective neurons encoded previously presented images during a final maintenance period, despite presentation of further images in the intervening interval. Population activity of stimulus-selective neurons predicted behavioral outcome in terms of correct and incorrect responses. These findings indicate that the MTL is part of a brain-wide network for working memory.

Piezotronic Effect Modulated Heterojunction Electron Gas in AlGaN/AlN/GaN Heterostructure Microwire

The piezotronic effect is applied to modulate the physical properties of heterojunction electron gas and thus tune the electric transport in AlGaN/AlN/GaN heterostructure microwires. At room temperature, the conductance is increased by 165% under -1.78% compressive strains, and reduced by 48% under 1.78% tensile strains; at 77 K, this modulating effect is further improved by 890% and 940% under compressive and tensile strains, respectively.

Profiling Photoinduced Carrier Generation in Semiconductor Microwire Arrays via Photoelectrochemical Metal Deposition

Au was photoelectrochemically deposited onto cylindrical or tapered p-Si microwires on Si substrates to profile the photoinduced charge-carrier generation in individual wires in a photoactive semiconductor wire array. Similar experiments were repeated for otherwise identical Si microwires doped to be n-type. The metal plating profile was conformal for n-type wires, but for p-type wires was a function of distance from the substrate and was dependent on the illumination wavelength. Spatially resolved charge-carrier generation profiles were computed using full-wave electromagnetic simulations, and the localization of the deposition at the p-type wire surfaces observed experimentally correlated well with the regions of enhanced calculated carrier generation in the volumes of the microwires. This technique could potentially be extended to determine the spatially resolved carrier generation profiles in a variety of mesostructured, photoactive semiconductors.

Electrical Characteristics of the Junction between PEDOT:PSS and Thiophene-Functionalized Silicon Microwires

Thiophene moieties have been attached to Si microwires (Si MWs) by a two-step chlorination/alkylation reaction method. X-ray photoelectron spectroscopy indicated that saturation of the surface occurred after 30 min of reaction time. Electrical measurements using a standard probe station indicated that the junction between individual thiophene-functionalized Si MWs and the conducting polymer poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (

PEDOT

PSS) became more ohmic as more thiophene was added to the MW surface. Under a light-limited current of 20 nA, representative of operation of Si MWs under 1 Sun illumination conditions, the iR loss of thiophene-n-Si MW/PEDOT-PSS contacts was 20 mV, representing an order of magnitude reduction compared with PEDOT-PSS junctions formed with methyl terminated n-Si MWs. Such iR losses are much less than typical catalytic overpotentials for fuel formation, and hence the thiophene-functionalized Si MW contacts will not limit the performance of a Si MW array-based solar fuels device under 1 Sun illumination.

Freeze Drying Improves the Shelf-Life of Conductive Polymer Modified Neural Electrodes

Coating microelectrodes with conductive polymer is widely recognized to decrease impedance and improve performance of implantable neural devices during recording and stimulation. A concern for wide-spread use of this approach is shelf-life, i.e., the electrochemical stability of the coated microelectrodes prior to use. In this work, we investigated the possibility of using the freeze-drying process in order to retain the native low impedance state and, thereby, improve the shelf-life of conductive polymer poly(3,4-ethylenedioxythiophene) (PEDOT)-PSS modified neural electrodes. Control PEDOT-PSS coated microelectrodes demonstrated a significant increase in impedance at 1 kHz after 41-50 days of room temperature storage. Based on equivalent circuit modeling derived from electrochemical impedance spectroscopy, this increase in impedance could be largely attributed to a decrease in the interfacial capacitance consistent with a collapse and closing of the porous structure of the polymeric coating. Time-dependent electrochemical impedance measurements revealed higher stability of the freeze-dried coated microelectrodes compared to the controls, such that impedance values after 41-50 days appeared to be indistinguishable from the initial levels. This suggests that freeze drying PEDOT-PSS coated microelectrodes correlates with enhanced electrochemical stability during shelf storage.

Comparison of the Performance of CoP-Coated and Pt-Coated Radial Junction n(+)p-Silicon Microwire-Array Photocathodes for the Sunlight-Driven Reduction of Water to H2(g)

The electrocatalytic performance for hydrogen evolution has been evaluated for radial-junction n(+)p-Si microwire (MW) arrays with Pt or cobalt phosphide, CoP, nanoparticulate catalysts in contact with 0.50 M H2SO4(aq). The CoP-coated (2.0 mg cm(-2)) n(+)p-Si MW photocathodes were stable for over 12 h of continuous operation and produced an open-circuit photovoltage (Voc) of 0.48 V, a light-limited photocurrent density (Jph) of 17 mA cm(-2), a fill factor (ff) of 0.24, and an ideal regenerative cell efficiency (ηIRC) of 1.9% under simulated 1 Sun illumination. Pt-coated (0.5 mg cm(-2)) n(+)p-Si MW-array photocathodes produced Voc = 0.44 V, Jph = 14 mA cm(-2), ff = 0.46, and η = 2.9% under identical conditions. Thus, the MW geometry allows the fabrication of photocathodes entirely comprised of earth-abundant materials that exhibit performance comparable to that of devices that contain Pt.

Percolation Diffusion into Self-Assembled Mesoporous Silica Microfibres

Percolation diffusion into long (11.5 cm) self-assembled, ordered mesoporous microfibres is studied using optical transmission and laser ablation inductive coupled mass spectrometry (LA-ICP-MS). Optical transmission based diffusion studies reveal rapid penetration (<5 s, D > 80 μm²∙s^-¹) of Rhodamine B with very little percolation of larger molecules such as zinc tetraphenylporphyrin (ZnTPP) observed under similar loading conditions. The failure of ZnTPP to enter the microfibre was confirmed, in higher resolution, using LA-ICP-MS. In the latter case, LA-ICP-MS was used to determine the diffusion of zinc acetate dihydrate, D~3 × 10^-4 nm²∙s^-1. The large differences between the molecules are accounted for by proposing ordered solvent and structure assisted accelerated diffusion of the Rhodamine B based on its hydrophilicity relative to the zinc compounds. The broader implications and applications for filtration, molecular sieves and a range of devices and uses are described.

"Liquid-liquid-solid"-type superoleophobic surfaces to pattern polymeric semiconductors towards high-quality organic field-effect transistors

Precisely aligned organic-liquid-soluble semiconductor microwire arrays have been fabricated by "liquid-liquid-solid" type superoleophobic surfaces directed fluid drying. Aligned organic 1D micro-architectures can be built as high-quality organic field-effect transistors with high mobilities of >10 cm(2) ·V(-1) ·s(-1) and current on/off ratio of more than 10(6) . All these studies will boost the development of 1D microstructures of organic semiconductor materials for potential application in organic electronics.

Synthesis of Au microwires by selective oxidation of Au-W thin-film composition spreads

We report on the stress-induced growth of Au microwires out of a surrounding Au-W matrix by selective oxidation, in view of a possible application as 'micro-Velcro'. The Au wires are extruded due to the high compressive stress in the tungsten oxide formed by oxidation of elemental W. The samples were fabricated as a thin-film materials library using combinatorial sputter deposition followed by thermal oxidation. Sizes and shapes of the Au microwires were investigated as a function of the W to Au ratio. The coherence length and stress state of the Au microwires were related to their shape and plastic deformation. Depending on the composition of the Au-W precursor, the oxidized samples showed regions with differently shaped Au microwires. The Au48W52 composition yielded wires with the maximum length to diameter ratio due to the high compressive stress in the tungsten oxide matrix. The values of wire length (35 μm) and diameter (2 μm) achieved at the Au48W52 composition are suitable for micro-Velcro applications.