Nonvolatile Phase-Only Transmissive Spatial Light Modulator with Electrical Addressability of Individual Pixels

Active metasurfaces with tunable subwavelength-scale nanoscatterers are promising platforms for high-performance spatial light modulators (SLMs). Among the tuning methods, phase-change materials (PCMs) are attractive because of their nonvolatile, threshold-driven, and drastic optical modulation, rendering zero-static power, crosstalk immunity, and compact pixels. However, current electrically controlled PCM-based metasurfaces are limited to global amplitude modulation, which is insufficient for SLMs. Here, an individual-pixel addressable, transmissive metasurface is experimentally demonstrated using the low-loss PCM Sb2Se3 and doped silicon nanowire heaters. The nanowires simultaneously form a diatomic metasurface, supporting a high-quality-factor (∼406) quasi-bound-state-in-the-continuum mode. A global phase-only modulation of ∼0.25π (∼0.2π) in simulation (experiment) is achieved, showing ten times enhancement. A 2π phase shift is further obtained using a guided-mode resonance with enhanced light-Sb2Se3 interaction. Finally, individual-pixel addressability and SLM functionality are demonstrated through deterministic multilevel switching (ten levels) and tunable far-field beam shaping. Our work presents zero-static power transmissive phase-only SLMs, enabled by electrically controlled low-loss PCMs and individual meta-molecule addressable metasurfaces.

Self-Powered Programmable van der Waals Photodetectors with Nonvolatile Semifloating Gate

Tunable photovoltaic photodetectors are of significant relevance in the fields of programmable and neuromorphic optoelectronics. However, their widespread adoption is hindered by intricate architectural design and energy consumption challenges. This study employs a nonvolatile MoTe2/hexagonal boron nitride/graphene semifloating photodetector to address these issues. Programed with pulsed gate voltage, the MoTe2 channel can be reconfigured from an n+-n to a p-n homojunction and the photocurrent transition changes from negative to positive values. Scanning photocurrent mapping reveals that the negative and positive photocurrents are attributed to Schottky junction and p-n homojunction, respectively. In the p-n configuration, the device demonstrates self-driven, linear, rapid response (∼3 ms), and broadband sensitivity (from 405 to 1500 nm) for photodetection, with typical performances of responsivity at ∼0.5 A/W and detectivity ∼1.6 × 1012 Jones under 635 nm illumination. These outstanding photodetection capabilities emphasize the potential of the semifloating photodetector as a pioneering approach for advancing logical and nonvolatile optoelectronics.

Electret Modulation Strategy to Enhance the Photosensitivity Performance of Two-Dimensional Molybdenum Sulfide

Due to the limited light absorption efficiency of atomic thickness layers and the existence of quenching effects, photodetectors solely made of transition metal dichalcogenides (TMDs) have exhibited an unsatisfactory detection performance. In this article, electret/TMD hybridized devices were proposed by vertically coupling a MoS2 channel and the PTFE film, which reveals an optimized photodetection behavior. Negative charges were generated in the PTFE layer through the corona charging method, akin to applying a negative bias on the MoS2 channel in lieu of a traditional voltage-driven back gate. Under a charging voltage of -6 kV, PTFE/MoS2 devices reveal improved photodetection performance (Rhybrid = 67.95A/W versus Ronly = 3.37 A/W, at 470 nm, 1.20 mW cm-2) and faster recovery speed (τd(hybrid) = 2000 ms versus τd(only) = 2900 ms) compared to those bare MoS2 counterparts. The optimal detection performance (2 orders of magnitude) was obtained when the charging voltage was -2 kV, limited by the minimum of the carrier density in MoS2 channels. This study provides an alternative strategy to optimize optoelectronic devices based on the 2D components through non-voltage-driven gating.

Tunable Resistive Switching Behaviors and Mechanism of the W/ZnO/ITO Memory Cell

A facile sol-gel spin coating method has been proposed for the synthesis of spin-coated ZnO nanofilms on ITO substrates. The as-prepared ZnO-nanofilm-based W/ZnO/ITO memory cell showed forming-free and tunable nonvolatile multilevel resistive switching behaviors with a high resistance ratio of about two orders of magnitude, which can be maintained for over 10³ s and without evident deterioration. The tunable nonvolatile multilevel resistive switching phenomena were achieved by modulating the different set voltages of the W/ZnO/ITO memory cell. In addition, the tunable nonvolatile resistive switching behaviors of the ZnO-nanofilm-based W/ZnO/ITO memory cell can be interpreted by the partial formation and rupture of conductive nanofilaments modified by the oxygen vacancies. This work demonstrates that the ZnO-nanofilm-based W/ZnO/ITO memory cell may be a potential candidate for future high-density, nonvolatile, memory applications.

True Nonvolatile High-Speed DRAM Cells Using Tailored Ultrathin IGZO

Severe power consumption in the continuous scaling of Silicon-based dynamic random access memory (DRAM) technology quests for a transistor technology with a much lower off-state leakage current. Wide bandgap amorphous oxide semiconductors, especially indium-gallium-zinc-oxide (IGZO) exhibit many orders of magnitude lower off-state leakage. However, they are typically heavily n-doped and require negative gate voltage to turn off, which prevents them from true nonvolatile operation. The efforts on doping density reduction typically result in mobility degradation and high Schottky barriers at contacts, causing severe degradation of on-current and operation speed of the DRAM cells. Here, high-speed true nonvolatile DRAM cells are successfully demonstrated by deep suppression of doping density in the IGZO channel using in situ oxygen ion beam treatment and ohmic contact engineering by inserting a thin In-rich indium-tin-oxide (ITO) at contact regions. A record high on-current of 40 µA µm^-1  at a large positive threshold voltage of 1.78 V enables the first true nonvolatile DRAM with the fastest write speed of 10 ns and data retention up to 25 h under power interruption, five orders of magnitude higher than the previously projected values.

A Facile Hydrothermal Synthesis and Resistive Switching Behavior of α-Fe2O3 Nanowire Arrays

A facile hydrothermal process has been developed to synthesize the α-Fe₂O₃ nanowire arrays with a preferential growth orientation along the [110] direction. The W/α-Fe₂O₃/FTO memory device with the nonvolatile resistive switching behavior has been achieved. The resistance ratio (R_HRS/R_LRS) of the W/α-Fe₂O₃/FTO memory device exceeds two orders of magnitude, which can be preserved for more than 10³s without obvious decline. Furthermore, the carrier transport properties of the W/α-Fe₂O₃/FTO memory device are dominated by the Ohmic conduction mechanism in the low resistance state and trap-controlled space-charge-limited current conduction mechanism in the high resistance state, respectively. The partial formation and rupture of conducting nanofilaments modified by the intrinsic oxygen vacancies have been suggested to be responsible for the nonvolatile resistive switching behavior of the W/α-Fe₂O₃/FTO memory device. This work suggests that the as-prepared α-Fe₂O₃ nanowire-based W/α-Fe₂O₃/FTO memory device may be a potential candidate for applications in the next-generation nonvolatile memory devices.

The Effect of Nitrogen Annealing on the Resistive Switching Characteristics of the W/TiO2/FTO Memory Device

In this paper, the effect of nitrogen annealing on the resistive switching characteristics of the rutile TiO₂ nanowire-based W/TiO₂/FTO memory device is analyzed. The W/TiO₂/FTO memory device exhibits a nonvolatile bipolar resistive switching behavior with a high resistance ratio (R_HRS/R_LRS) of about two orders of magnitude. The conduction behaviors of the W/TiO₂/FTO memory device are attributed to the Ohmic conduction mechanism and the Schottky emission in the low resistance state and the high resistance state, respectively. Furthermore, the R_HRS/R_LRS of the W/TiO₂/FTO memory device is obviously increased from about two orders of magnitude to three orders of magnitude after the rapid nitrogen annealing treatment. In addition, the change in the W/TiO₂ Schottky barrier depletion layer thickness and barrier height modified by the oxygen vacancies at the W/TiO₂ interface is suggested to be responsible for the resistive switching characteristics of the W/TiO₂/FTO memory device. This work demonstrates the potential applications of the rutile TiO₂ nanowire-based W/TiO₂/FTO memory device for high-density data storage in nonvolatile memory devices.

Bipolar Switching Properties of the Transparent Indium Tin Oxide Thin Film Resistance Random Access Memories

In this study, the bipolar switching properties and electrical conduction behaviors of the ITO thin films RRAM devices were investigated. For the transparent RRAM devices structure, indium tin oxide thin films were deposited by using the RF magnetron sputtering method on the ITO/glass substrate. For the ITO/ITO_X/ITO/glass (MIM) structure, an indium tin oxide thin film top electrode was prepared to form the transparent RRAM devices. From the experimental results, the 10² On/Off memory ratio and bipolar switching cycling properties for set/reset stable states were found and discussed. All transparent RRAM devices exhibited the obvious memory window and low set voltage for the switching times of 120 cycles. The electrical transport mechanisms were dominated by the ohmic contact and space charge limit conduction (SCLC) models for set and reset states. Finally, the transmittances properties of the transparent ITO/ITO_X/ITO RRAM devices for the different oxygen growth procedures were about 90% according to the UV-Vis spectrophotometer for the visible wavelength range.

Reconfigurable Compute-In-Memory on Field-Programmable Ferroelectric Diodes

The deluge of sensors and data generating devices has driven a paradigm shift in modern computing from arithmetic-logic centric to data-centric processing. Data-centric processing require innovations at the device level to enable novel compute-in-memory (CIM) operations. A key challenge in the construction of CIM architectures is the conflicting trade-off between the performance and their flexibility for various essential data operations. Here, we present a transistor-free CIM architecture that permits storage, search, and neural network operations on sub-50 nm thick Aluminum Scandium Nitride ferroelectric diodes (FeDs). Our circuit designs and devices can be directly integrated on top of Silicon microprocessors in a scalable process. By leveraging the field-programmability, nonvolatility, and nonlinearity of FeDs, search operations are demonstrated with a cell footprint <0.12 μm² when projected onto 45 nm node technology. We further demonstrate neural network operations with 4-bit operation using FeDs. Our results highlight FeDs as candidates for efficient and multifunctional CIM platforms.

Room-Temperature Fabricated Multilevel Nonvolatile Lead-Free Cesium Halide Memristors for Reconfigurable In-Memory Computing

Recently, conductive-bridging memristors based on metal halides, such as halide perovskites, have been demonstrated as promising components for brain-inspired hardware-based neuromorphic computing. However, realizing devices that simultaneously fulfill all of the key merits (low operating voltage, high dynamic range, multilevel nonvolatile storage capability, and good endurance) remains a great challenge. Herein, we describe lead-free cesium halide memristors incorporating a MoO_X interfacial layer as a type of conductive-bridging memristor. With this design, we obtained highly uniform and reproducible memristors that exhibited all-around resistive switching characteristics: ultralow operating voltages (<0.18 V), low variations (<30 mV), long retention times (>10⁶ s), high endurance (>10⁵, full on/off cycles), record-high on/off ratios (>10¹⁰, smaller devices having areas <5 × 10^-4 mm²), fast switching (<200 ns), and multilevel programming abilities (>64 states). With these memristors, we successfully implemented stateful logic functions in a reconfigurable architecture and accomplished a high classification accuracy (ca. 90%) in the simulated hand-written-digits classification task, suggesting their versatility in future in-memory computing applications. In addition, we exploited the room-temperature fabrication of the devices to construct a fully functional three-dimensional stack of memristors, which demonstrates their potential of high-density integration desired for data-intensive neuromorphic computing. High-performance, environmentally friendly cesium halide memristors provide opportunities toward next-generation electronics beyond von Neumann architectures.

Multiwavelength Optoelectronic Synapse with 2D Materials for Mixed-Color Pattern Recognition

Neuromorphic visual systems emulating biological retina functionalities have enormous potential for in-sensor computing, with prospects of making artificial intelligence ubiquitous. Conventionally, visual information is captured by an image sensor, stored by memory units, and eventually processed by the machine learning algorithm. Here, we present an optoelectronic synapse device with multifunctional integration of all the processes required for real time object identification. Ultraviolet-visible wavelength-sensitive MoS₂ FET channel with infrared sensitive PtTe₂/Si gate electrode enables the device to sense, store, and process optical data for a wide range of the electromagnetic spectrum, while maintaining a low dark current. The device exhibits optical stimulation-controlled short-term and long-term potentiation, electrically driven long-term depression, synaptic weight update for multiple wavelengths of light ranging from 300 nm in ultraviolet to 2 μm in infrared. An artificial neural network developed using the extracted weight update parameters of the device can be trained to identify both single wavelength and mixed wavelength patterns. This work demonstrates a device that could potentially be used for realizing a multiwavelength neuromorphic visual system for pattern recognition and object identification.

Charge Configuration Memory Devices: Energy Efficiency and Switching Speed

Current trends in data processing have given impetus for an intense search of new concepts of memory devices with emphasis on efficiency, speed, and scalability. A promising new approach to memory storage is based on resistance switching between charge-ordered domain states in the layered dichalcogenide 1T-TaS2. Here we investigate the energy efficiency scaling of such charge configuration memory (CCM) devices as a function of device size and data write time τW as well as other parameters that have bearing on efficient device operation. We find that switching energy efficiency scales approximately linearly with both quantities over multiple decades, departing from linearity only when τW approaches the ∼0.5 ps intrinsic switching limit. Compared to current state of the art memory devices, CCM devices are found to be much faster and significantly more energy efficient, demonstrated here with two-terminal switching using 2.2 fJ, 16 ps electrical pulses.

Selector-less Ferroelectric Tunnel Junctions by Stress Engineering and an Imprinting Effect for High-Density Cross-Point Synapse Arrays

In the quest for highly scalable and three-dimensional (3D) stackable memory components, ferroelectric tunnel junction (FTJ) crossbar architectures are promising technologies for nonvolatile logic and neuromorphic computing. Most FTJs, however, require additional nonlinear devices to suppress sneak-path current, limiting large-scale arrays in practical applications. Moreover, the giant tunneling electroresistance (TER) remains challenging due to their inherent weak polarization. Here, we present that the employment of a diffusion barrier layer as well as a bottom metal electrode having a significantly low thermal expansion coefficient has been identified as an important way to enhance the strain, stabilize the ferroelectricity, and manage the leakage current in ultrathin hafnia film, achieving a high TER of 100, negligible resistance changes even up to 10⁸ cycles, and a high switching speed of a few tens of nanoseconds. Also, we demonstrate that the usage of an imprinting effect in a ferroelectric capacitor induced by an ionized oxygen vacancy near the electrode results in highly asymmetric current-voltage characteristics with a rectifying ratio of 1000. Notably, the proposed FTJ exhibits a high density array size (>4k) with a securing read margin of 10%. These findings provide a guideline for the design of high-performance and selector-free FTJ devices for large-scale crossbar arrays in neuromorphic applications.

Brain-Inspired Hardware Solutions for Inference in Bayesian Networks

The implementation of inference (i.e., computing posterior probabilities) in Bayesian networks using a conventional computing paradigm turns out to be inefficient in terms of energy, time, and space, due to the substantial resources required by floating-point operations. A departure from conventional computing systems to make use of the high parallelism of Bayesian inference has attracted recent attention, particularly in the hardware implementation of Bayesian networks. These efforts lead to several implementations ranging from digital circuits, mixed-signal circuits, to analog circuits by leveraging new emerging nonvolatile devices. Several stochastic computing architectures using Bayesian stochastic variables have been proposed, from FPGA-like architectures to brain-inspired architectures such as crossbar arrays. This comprehensive review paper discusses different hardware implementations of Bayesian networks considering different devices, circuits, and architectures, as well as a more futuristic overview to solve existing hardware implementation problems.

Different Withering Times Affect Sensory Qualities, Chemical Components, and Nutritional Characteristics of Black Tea

The present study emphasizes the effect of withering time set at 4 ± 0.5 h (WT4), 6 ± 0.5 h (WT6), 8 ± 0.5 h (WT8), 10 ± 0.5 h (WT10), and 12 ± 0.5 h (WT12) on the sensory qualities, chemical components, and nutritional characteristics of black tea. The sensory evaluation revealed high total quality scores at WT8 and WT10. Polysaccharides, amino acids, and soluble sugars significantly increased with an increase in withering time, and an apparent peak value was obtained at WT10. However, polyphenols, flavonoids, glycosides, organic acids, catechins, alkanoids, and theaflavins decreased with an increase in withering time. With an increase in withering time, the content of aromatic substances showed a trend of increasing first and then decreasing. The peaks of alcohols, aldehydes, and acids appeared at 10 ± 0.5 h, 10 ± 0.5 h, and 8 ± 0.5 h, respectively. The content of esters, ketones, and hydrocarbons showed a downward trend with an increase in withering time. Aroma analysis revealed that withering time could not exceed 10 ± 0.5 h. Black tea withered up to WT10 showed enhanced inhibition of α-glucosidase and α-amylase activity with good sensorial attributes. Glucose uptake inhibition capacity increased up 6 ± 0.5 h and then decreased, while antioxidant capacity decreased with an increase in withering time. The overall results show that the 8 ± 0.5 h to 10 ± 0.5 h withering time could improve black tea quality and nutritional characteristics.

Full-Electrical Writing and Reading of Magnetization States in a Magnetic Junction with Symmetrical Structure and Antiparallel Magnetic Configuration

Full-electrical writing and reading of magnetization states are vital for the development of next-generation spintronic devices with high density and ultralow-power consumption. Here, we proposed a method to realize the full-electrical writing and reading of magnetization states via a structural design, which only requires a symmetrical device structure and an antiparallel magnetic configuration. CrBr₃, h-BN, and 1T-MnSe₂ were selected to construct the device of CrBr₃/h-BN/1T-MnSe₂/h-BN/CrBr₃, where the magnetization of two CrBr₃ layers was fixed to the antiparallel state. By changing the direction and magnitude of the applied electric field, it is proved that the magnetization of 1T-MnSe₂ could be reversed. Moreover, the device energies before and after the magnetization reversal are the same when the applied electric field is removed due to the structural symmetry. Meanwhile, the magnetic anisotropy energy of 1T-MnSe₂ could induce an energy barrier, to guarantee the nonvolatile magnetization reversal in the present device. In addition, the tunnel magnetoresistance ratio was found up to 421%, showing a promising application to full-electrically write and read magnetization in spintronics. The present study likely promotes the development of full-electrical and ultralow-power spintronics devices.

Strain-Mediated Giant Magnetoelectric Coupling in a Crystalline Multiferroic Heterostructure

Multiferroic heterostructures based on the strain-mediated mechanism present ultralow heat dissipation and large magnetoelectric coupling coefficient, two conditions that require endless improvement for the design of fast nonvolatile random access memories with reduced power consumption. This work shows that a structure consisting of a [Pb(Mg_1/3Nb_2/3)O₃]_0.7-[PbTiO₃]_0.3 (001) substrate on which a crystalline FeGa(001)/MgO(001) bilayer is deposited exhibits a giant magnetoelectric coupling coefficient of order 15 × 10^-6 s m^-1 at room temperature. That result is a 2-fold increment over the previous highest value. The spatial orientation of the magnetization vector in the epitaxial FeGa film is switched 90° with the application of electric field. The symmetry of the magnetic anisotropy is studied by the angular dependence of the remanent magnetization, demonstrating that poling the sample generates a switchable uniaxial magnetoelastic anisotropy in the film that overcomes the native low 4-fold magnetocrystalline anisotropy energy. Magnetic force microscopy shows that the switch of the easy axis activates the displacement of domain walls and the domain structures remain stable after that point. This result highlights the interest in single-crystalline structures including materials with large magnetoelastic coupling and small magnetocrystalline anisotropy for low-energy-consuming spintronic applications.

Engineering an Indium Selenide van der Waals Interface for Multilevel Charge Storage

As the continuous miniaturization of floating-gate transistors approaches a physical limit, new innovations in device architectures, working principles, and device materials are in high demand. This study demonstrated a nonvolatile memory structure with multilevel data storage that features a van der Waals gate architecture made up of a partially oxidized surface layer/indium selenide (InSe) van der Waals interface. The key functionality of this proof-of-concept device is provided through the generation of charge-trapping sites via an indirect oxygen plasma treatment on the InSe surface layer. In contrast to floating-gate nonvolatile memory, these sites have the ability to retain charge without the help of a gate dielectric. Together with the layered structure, the surface layer with charge-trapping sites facilitates continual electrostatic doping in the underlying InSe layers. The van der Waals gating effect is further supported by trapped charge-induced core-level energy shifts and relative work function variations obtained from operando scanning X-ray photoelectron spectroscopy and Kelvin probe microscopy, respectively. On modulating the amount of electric field-induced trapped electrons by the electrostatic gate potential, eight distinct storage states remained over 3000 s. Moreover, the device exhibits a high current switching ratio of 10⁶ within 11 cycles. The demonstrated characteristics suggest that the engineering of an InSe interface has potential applications for nonvolatile memory.

Area-Scalable 109-Cycle-High-Endurance FeFET of Strontium Bismuth Tantalate Using a Dummy-Gate Process

Strontium bismuth tantalate (SBT) ferroelectric-gate field-effect transistors (FeFETs) with channel lengths of 85 nm were fabricated by a replacement-gate process. They had metal/ferroelectric/insulator/semiconductor stacked-gate structures of Ir/SBT/HfO₂/Si. In the fabrication process, we prepared dummy-gate transistor patterns and then replaced the dummy substances with an SBT precursor. After forming Ir gate electrodes on the SBT, the whole gate stacks were annealed for SBT crystallization. Nonvolatility was confirmed by long stable data retention measured for 10⁵ s. High erase-and-program endurance of the FeFETs was demonstrated for up to 10⁹ cycles. By the new process proposed in this work, SBT-FeFETs acquire good channel-area scalability in geometry along with lithography ability.

Excellent Reliability and High-Speed Antiferroelectric HfZrO2 Tunnel Junction by a High-Pressure Annealing Process and Built-In Bias Engineering

Hafnia-based ferroelectric tunnel junctions (FTJs) have great potential for use in logic in nonvolatile memory because of their complementary metal-oxide-semiconductor process compatibility, low power consumption, high scalability, and nondestructive readout. However, typically, ferroelectrics have a depolarization field, resulting in poor endurance owing to the early dielectric breakdown. Herein, an outstandingly reliable and high-speed antiferroelectric HfZrO tunnel junction (AFTJ) is probed to understand whether it is a promising candidate for next-generation nonvolatile memory applications. High-reliability AFTJ can be explained by less charge injection due to the low depolarized field. The formation of two stable nonvolatile states, even with antiferroelectric materials, is possible if asymmetric work function electrodes and fixed oxide charges are employed, generating a built-in bias and shifting the polarization-voltage curve. In addition, via high-pressure annealing, a critical voltage that determines the transition from the t-phase to the o-phase is effectively reduced (22%). The AFTJ shows a higher endurance property (>10⁹ cycles) and faster switching speed (<30 ns) than FTJ. Hence, it is proposed that with the help of internal bias modulation and high-pressure annealing, AFTJs can be employed in next-generation memory devices.

Modeling Electrical Switching of Nonvolatile Phase-Change Integrated Nanophotonic Structures with Graphene Heaters

Progress in integrated nanophotonics has enabled large-scale programmable photonic integrated circuits (PICs) for general-purpose electronic-photonic systems on a chip. Relying on the weak, volatile thermo-optic, or electro-optic effects, such systems usually exhibit limited reconfigurability along with high-energy consumption and large footprints. These challenges can be addressed by resorting to chalcogenide phase-change materials (PCMs) such as Ge₂Sb₂Te₅ (GST) that provide a substantial optical contrast in a self-holding fashion upon phase transitions. However, current PCM-based integrated photonic applications are limited to single devices or simple PICs because of the poor scalability of the optical or electrical self-heating actuation approaches. Thermal-conduction heating via external electrical heaters, instead, allows large-scale integration and large-area switching, but fast and energy-efficient electrical control is yet to be achieved. Here, we model electrical switching of GST-clad-integrated nanophotonic structures with graphene heaters based on the programmable GST-on-silicon platform. Thanks to the ultra-low heat capacity and high in-plane thermal conductivity of graphene, the proposed structures exhibit a high switching speed of ∼80 MHz and a high energy efficiency of 19.2 aJ/nm³ (6.6 aJ/nm³) for crystallization (amorphization) while achieving complete phase transitions to ensure strong attenuation (∼6.46 dB/μm) and optical phase (∼0.28 π/μm at 1550 nm) modulation. Compared with indium tin oxide and silicon p-i-n heaters, the structures with graphene heaters display two orders of magnitude higher figure of merits for heating and overall performance. Our work facilitates the analysis and understanding of the thermal-conduction heating-enabled phase transitions on PICs and supports the development of future large-scale PCM-based electronic-photonic systems.

Decade of 2D-materials-based RRAM devices: a review

Two dimensional (2D) materials have offered unique electrical, chemical, mechanical and physical properties over the past decade owing to their ultrathin, flexible, and multilayer structure. These layered materials are being used in numerous electronic devices for various applications, and this review will specifically focus on the resistive random access memories (RRAMs) based on 2D materials and their nanocomposites. This study presents the device structures, conduction mechanisms, resistive switching properties, fabrication technologies, challenges and future aspects of 2D-materials-based RRAMs. Graphene, derivatives of graphene and MoS2 have been the major contributors among 2D materials for the application of RRAMs; however, other members of this family such as hBN, MoSe2, WS2 and WSe2 have also been inspected more recently as the functional materials of nonvolatile RRAM devices. Conduction in these devices is usually dominated by either the penetration of metallic ions or migration of intrinsic species. Most prominent advantages offered by RRAM devices based on 2D materials include fast switching speed (<10 ns), less power losses (10 pJ), lower threshold voltage (<1 V) long retention time (>10 years), high electrical endurance (>108 voltage cycles) and extended mechanical robustness (500 bending cycles). Resistive switching properties of 2D materials have been further enhanced by blending them with metallic nanoparticles, organic polymers and inorganic semiconductors in various forms.

Electric-Field-Controlled Nonvolatile Magnetization Rotation and Magnetoresistance Effect in Co/Cu/Ni Spin Valves on Piezoelectric Substrates

Electric-field control of magnetism is a key issue for the future development of low-power spintronic devices. By utilizing the opposite strain responses of the magnetic anisotropies in Co and Ni films, a Co/Cu/Ni/0.7Pb(Mg_1/3Nb_2/3)O₃-0.3PbTiO₃ (PMN-PT) spin-valve/piezoelectric heterostructure with ∼7 nm Cu spacer layer was properly designed and fabricated. The purely electric-field-controlled nonvolatile and reversible magnetization rotations in the Co free layer were achieved, whereas the magnetization of the Ni fixed layer was almost unchanged. Accordingly, not only the electroresistance but also the electric-field-tuned magnetoresistance effects were obtained, and more importantly at least six nonvolatile magnetoresistance states in the strain-tuned spin valve were achieved by setting the PMN-PT into different nonvolatile piezo-strain states. These findings highlight potential strategies for designing electric-field-driven multistate spintronic devices.

Strain-Mediated Coexistence of Volatile and Nonvolatile Converse Magnetoelectric Effects in Fe/Pb(Mg1/3Nb2/3)0.7Ti0.3O3 Heterostructure

Strain-mediated ferromagnetic/ferroelectric (FE) heterostructures have played an important role in multiferroic materials to investigate the electric-field control of magnetism in the past decade, due to their excellent performances, such as room-temperature operation and large magnetoelectric (ME) coupling effect. Because of the different FE-switching-originated strain behaviors and varied interfacial coupling effect, both loop-like (nonvolatile) and butterfly-like (volatile) converse ME effects have been reported. Here, we investigate the electric-field control of magnetism in a multiferroic heterostructure composed of a polycrystalline Fe thin film and a Pb(Mg_1/3Nb_2/3)_0.7Ti_0.3O₃ single crystal, and the experimental results exhibit complex behaviors, suggesting the coexistence of volatile and nonvolatile converse ME effects. By separating the symmetrical and antisymmetrical parts of the electrical modulation of magnetization, we distinguished the loop-like hysteresis and butterfly-like magnetization changes tuned by electric fields, corresponding to the strain effects related to the FE 109° switching and 71/180° switching, respectively. Further magnetic-field-dependent as well as angular-dependent investigation of the converse ME effect confirmed the strain-mediated magnetism involving competition among the Zeeman energy, magnetocrystalline anisotropy energy, and strain-generated magnetoelastic energy. This study is helpful for understanding the electric-field control of magnetism in multiferroic heterostructures as well as its relevant applications.

Speed up Ferroelectric Organic Transistor Memories by Using Two-Dimensional Molecular Crystalline Semiconductors

Ferroelectric organic field-effect transistors (Fe-OFETs) have attracted intensive attention because of their promising potential in nonvolatile memory devices. The quick switching between binary states is a significant fundamental feature in evaluating Fe-OFET memories. Here, we employ 2D molecular crystals via a solution-based process as the conducting channels in transistor devices, in which ferroelectric polymer acts as the gate dielectric. A high carrier mobility of up to 5.6 cm² V^-1 s^-1 and a high on/off ratio of 10⁶ are obtained. In addition, the efficient charge injection by virtue of the ultrathin 2D molecular crystals is beneficial in achieving rapid operations in the Fe-OFETs; devices exhibit short switching time of ∼2.9 and ∼3.0 ms from the on- to the off-state and from the off- to the on-state, respectively. Consequently, the presented strategy is capable of speeding up Fe-OFET memory devices by using solution-processed 2D molecular crystals.

Nonvolatile Bipolar Resistive Switching Behavior in the Perovskite-like (CH3NH3)2FeCl4

The bipolar resistive switching behavior in a device based on an crystalline iron-based organic-inorganic, perovskite-like material of (CH3NH3)2FeCl4 (MAFC), was examined and studied. Both high and low resistance states appeared to have no obvious degradation during a measurement period of 600 s with 400 cycles in a Ag/MAFC/Cu device, which also exhibited good thermal stability over a wide temperature range of 290 to 340 K. The conductivity-state switching behavior was derived from the competition between the ionic current within the MAFC and the Faradaic current that originated from oxidative reactions at the Ag/MAFC/Cu interface. A model explaining the oxidative reaction process was established to describe the symmetric resistive switching behavior in the Ag/MAFC/Cu cell. With an applied bias voltage sweeping, the oxidative layers passivated and dissipated at the Ag/MAFC/Cu interface that resulted in the competition between the induced current and the ionic current, and thus caused a symmetric resistance change. On the basis of this interfacial effect, the MAFC crystals can be used as memristor elements in devices for write-read-erase-rewrite process.

Multilevel Nonvolatile Memristive and Memcapacitive Switching in Stacked Graphene Sheets

We fabricated devices consisting of single and double graphene sheets embedded in organic polymer layers. These devices had binary and ternary nonvolatile resistive switching behaviors, respectively. Capacitance-voltage (C-V) curves and scanning capacitance microscopy (SCM) images were obtained to investigate the switching mechanism. The C-V curves exhibited a large hysteresis, implying that the graphene sheets acted as charging and discharging layers and that resistive switching was caused by charges trapped in the graphene layers. In addition, binary capacitive switching behaviors were observed for the device with a single graphene sheet, and ternary capacitive switching behaviors were observed for the device with the double graphene sheets. These results demonstrated that devices consisting of graphene sheets embedded in the polymer layers can be applied to multilevel nonvolatile memcapacitive devices as well as memristive devices.

Multilevel Resistance Switching Memory in La2/3Ba1/3MnO3/0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 (011) Heterostructure by Combined Straintronics-Spintronics

We demonstrate a memory device with multifield switchable multilevel states at room temperature based on the integration of straintronics and spintronics in a La2/3Ba1/3MnO3/0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 (PMN-PT) (011) heterostructure. By precisely controlling the electric field applied on the PMN-PT substrate, multiple nonvolatile resistance states can be generated in La2/3Ba1/3MnO3 films, which can be ascribed to the strain-modulated metal-insulator transition and phase separation of Manganite. Furthermore, because of the strong coupling between spin and charge degrees of freedom, the resistance of the La2/3Ba1/3MnO3 film can be readily modulated by magnetic field over a broad temperature range. Therefore, by combining electroresistance and magnetoresistance effects, multilevel resistance states with excellent retention and endurance properties can be achieved at room temperature with the coactions of electric and magnetic fields. The incorporation of ferroelastic strain and magnetic and resistive properties in memory cells suggests a promising approach for multistate, high-density, and low-power consumption electronic memory devices.

Electric-Field Control of Magnetism in Co40Fe40B20/(1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 Multiferroic Heterostructures with Different Ferroelectric Phases

Electric-field control of magnetism in multiferroic heterostructures composed of Co40Fe40B20 (CoFeB) and (1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (PMN-xPT) with different ferroelectric phases via changing composition and temperature is explored. It is demonstrated that the nonvolatile looplike bipolar-electric-field-controlled magnetization, previously found in the CoFeB/PMN-xPT heterostructures with PMN-xPT in the rhombohedral (R) phase around the morphotropic phase boundary (MPB), also occurs for PMN-xPTs with both R phase (far away from MPB) and monoclinic (M) phase, suggesting that the phenomenon is the common feature of CoFeB/PMN-xPT multiferroic heterostructures for PMN-xPT with different phases. The magnitude of the effect changes with increasing temperature and volatile bipolar-electric-field-controlled magnetization with a butterflylike behavior occurs when the ferroelectric phase changes to the tetragonal phase (T). Moreover, for the R-phase sample with x = 0.18, an abrupt and giant increase of magnetization is observed at a characteristic temperature in the temperature dependence of magnetization curve. These results are discussed in terms of coupling between magnetism and ferroelectric domains including macro- and microdomains for different ferroelectric phases. This work is helpful for understanding the phenomena of electric-field control of magnetism in FM/FE multiferroic heterostructures and is also important for applications.