Ultrathin Films of MXene Nanosheets Decorated by Ionic Branched Nanoparticles with Enhanced Energy Storage Stability

Two-dimensional (2D) materials such as MXenes have shown great potential for energy storage applications due to their high surface area and high conductivity. However, their practical implementation is limited by their tendency to restack, similar to other 2D materials, leading to a decreased long-term performance. Here, we present a novel approach to addressing this issue by combining MXene (Ti3C2Tx) nanosheets with branched ionic nanoparticles from polyhedral oligomeric silsesquioxanes (POSS) using an amphiphilicity-driven assembly for the formation of composite monolayers of nanoparticle-decorated MXene nanosheets at the air-water interface. The amphiphilic hybrid MXene/POSS monolayers allow for the fabrication of organized multilayered films with ionic nanoparticles supporting the nanoscale gap between MXene nanosheets. For these composite multilayers, we observed a 400% enhancement in specific capacitance compared to pure drop-cast MXene films. Furthermore, dramatically enhanced electrochemical cycling stability for ultrathin-film electrodes (<400 nm in thickness) with a 91% capacitance retention over 10,000 cycles has been achieved. Our results suggest that this insertion of 0D ionic nanoparticles with complementary interactions in between 2D MXene nanosheets could be extended to other hybrid 0D-2D nanomaterials, providing a promising pathway for the development of hybrid electrode architectures with enhanced ionic transport for long-term energy cycling and storage, capacitive deionization, and ionic filtration.

POSS and SSQ Materials in Dental Applications: Recent Advances and Future Outlooks

Recently, silsesquioxanes (SSQ) and polyhedral oligomeric silsesquioxanes (POSS) have gained much interest in the area of biomaterials, mainly due to their intrinsic properties such as biocompatibility, complete non-toxicity, the ability to self-assemble and to form a porous structure, facilitating cell proliferation, creating a superhydrophobic surface, osteoinductivity, and ability to bind hydroxyapatite. All the above has resulted in new developments in medicine. However, the application of POSS-containing materials in dentistry is still at initial stage and deserves a systematic description to ensure future development. Significant problems, such as reduction of polymerization shrinkage, water absorption, hydrolysis rate, poor adhesion and strength, unsatisfactory biocompatibility, and corrosion resistance of dental alloys, can be addressed by the design of multifunctional POSS-containing materials. Because of the presence of silsesquioxanes, it is possible to obtain smart materials that allow the stimulation of phosphates deposition and repairing of micro-cracks in dental fillings. Hybrid composites result in materials exhibiting shape memory, as well as antibacterial, self-cleaning, and self-healing properties. Moreover, introducing POSS into polymer matrix allows for materials for bone reconstruction, and wound healing. This review covers the recent developments in the field of POSS application in dental materials and gives the future perspectives within a promising field of biomedical material science and chemical engineering.

Chitosan/POSS Hybrid Hydrogels for Bone Tissue Engineering

Hybrid hydrogels composed of chitosan (CS) have shown great potential in bone tissue engineering and regeneration. The introduction of polyhedral oligomeric silsesquioxanes (POSS) in the biopolymeric matrix has been demonstrated to improve the rheological and biological properties of the hybrid composites. In this work, we have integrated the favourable features of chitosan (CS) and POSS nanoparticles to design new nanocomposites for bone tissue regeneration, focusing our attention on the effect of POSS concentration within the CS matrix (0.5, 1, and 1.5 equivalents in weight of POSS with respect to CS) on the chemical, physical, rheological, and in vitro biological properties of the final composites. The drug release ability of the synthesized hydrogel scaffolds were also investigated using, as the model drug, ketoprofen, that was included in the scaffold during the gelling procedure, showing a more controlled release for the hybrids with respect to CS (86-91% of drug released after two weeks). The results of the in vitro biological tests performed on human fetal osteoblastic cells (hFOB 1.19) culture demonstrated the great biocompatibility of the hybrid materials. The hybrids, at the different POSS concentrations, showed values of cell mortality superimposable with control cells (11.1 vs. 9.8%), thus revealing the CS/POSS hydrogels as possible candidates for bone tissue engineering applications.

Biocompatibility Computation of Muscle Cells on Polyhedral Oligomeric Silsesquioxane-Grafted Polyurethane Nanomatrix

This study was performed to appraise the biocompatibility of polyhedral oligomeric silsesquioxane (POSS)-grafted polyurethane (PU) nanocomposites as potential materials for muscle tissue renewal. POSS nanoparticles demonstrate effectual nucleation and cause noteworthy enhancement in mechanical and thermal steadiness as well as biocompatibility of resultant composites. Electrospun, well-aligned, POSS-grafted PU nanofibers were prepared. Physicochemical investigation was conducted using several experimental techniques, including scanning electron microscopy, energy dispersive X-ray spectroscopy, electron probe microanalysis, Fourier transform infrared spectroscopy, and X-ray diffraction pattern. Adding POSS molecules to PU did not influence the processability and morphology of the nanocomposite; however, we observed an obvious mean reduction in fiber diameter, which amplified specific areas of the POSS-grafted PU. Prospective biomedical uses of nanocomposite were also appraised for myoblast cell differentiation in vitro. Little is known about C2C12 cellular responses to PU, and there is no information regarding their interaction with POSS-grafted PU. The antimicrobial potential, anchorage, proliferation, communication, and differentiation of C2C12 on PU and POSS-grafted PU were investigated in this study. In conclusion, preliminary nanocomposites depicted superior cell adhesion due to the elevated free energy of POSS molecules and anti-inflammatory potential. These nanofibers were non-hazardous, and, as such, biomimetic scaffolds show high potential for cellular studies and muscle regeneration.

Large Polyhedral Oligomeric Silsesquioxane Cages: The Isolation of Functionalized POSS with an Unprecedented Si18 O27 Core

The synthesis of organo-functionalized polyhedral oligomeric silsesquioxanes (POSS, (R-SiO_1.5 )_n , T_n ) is an area of significant activity. To date, T₁₄ is the largest such cage synthesized and isolated as a single isomer. Herein, we report an unprecedented, single-isomer styryl-functionalized T₁₈ POSS. Unambiguously identified among nine possible isomers by multinuclear solution NMR (¹ H, ¹³ C, and ²⁹ Si), MALDI-MS, FTIR, and computational studies, this is the largest single-isomer functionalized T_n compound isolated to date. A ring-strain model was developed to correlate the ²⁹ Si resonances with the number of 6-, 5-, and/or 4-Si-atom rings that each non-equivalent Si atom is part of. The model successfully predicts the speciation of non-equivalent Si atoms in other families of T_n compounds, demonstrating its general applicability for assigning ²⁹ Si resonances to Si atoms in cage silsesquioxanes and providing a useful tool for predicting Si-atom environments.

New Functionalized Ionic Liquids Based on POSS for the Detection of Fe3+ Ion

This study reports a novel series of imidazolium ionic liquids (ILs) based on polyhedral oligomeric silsesquioxanes (POSS) towards effective detection of metal ions, especially Fe3+ ion. 1H, 13C, 29Si NMR, high resolution mass spectra (HRMS) and Fourier transform infrared spectra (FTIR) were applied to confirm the structures of the ILs based on POSS (ILs-POSS). The three ILs-POSS were synthesized via a green chemistry approach-a thiol-ene "click" reaction without metal ions as catalysts. Furthermore, the spherical vesicle structures of the ILs-POSS were observed and caused by self-assembly behaviors. Through comprehensive characterizations, these ILs-POSS have performed excellent thermal stabilities and low glass transition temperatures. In addition, we found it very meaningful that the limits of detection (LODs) of the three ILs-POSS for the detection of the Fe3+ ion were 7.91 × 10-8 M, 1.2 × 10-7 M, and 1.2 × 10-7 M, respectively. These data illustrate that these ILs-POSS have great potential for the detection of the Fe3+ ion. In conclusion, this study not only prepared novel ILs-POSS, but also provided new materials as fluorescent sensors in the detection of Fe3+.

Novel Polyhedral Silsesquioxanes [POSS(OH)32] as Anthracycline Nanocarriers-Potential Anticancer Prodrugs

Anthracyclines belong to the anticancer drugs that are widely used in chemotherapy. However, due to their systemic toxicity they also exert dangerous side effects associated mainly with cardiovascular risks. The pathway that is currently often developed is their chemical and physical modification via formation of conjugated or complexed prodrug systems with a variety of nanocarriers that can selectively release the active species in cancer cells. In this study, six new nanoconjugates were synthesized with the use of polyhedral oligosilsesquioxanes [POSS(OH)32] as nanocarriers of the anticancer drugs anthracyclines-doxorubicin (DOX) and daunorubicin (DAU). These prodrug conjugates are also equipped with poly(ethylene glycol) (PEG) moieties of different structure and molecular weight. Water-soluble POSS, succinic anhydride modified (SAMDOX and SAMDAU) with carboxylic function, and PEGs (PEG1, PEG2 and PEGB3) were used for the synthesis. New nanoconjugates were formed via ester bonds and their structure was confirmed by NMR spectroscopy (1H-NMR, 13C-NMR, 1H-13C HSQC, DOSY and 1H-1H COSY), FTIR and DLS. Drug release rate was evaluated using UV-Vis spectroscopy at pH of 5.5. Release profiles of anthracyclines from conjugates 4-9 point to a range of 10 to 75% (after 42 h). Additionally, model NMR tests as well as diffusion ordered spectroscopy (DOSY) confirmed formation of the relevant prodrugs. The POSS-anthracycline conjugates exhibited prolonged active drug release time that can lead to the possibility of lowering administered doses and thus giving them high potential in chemotherapy. Drug release from conjugate 7 after 42 h was approx. 10%, 33% for conjugate 4, 47% for conjugate 5, 6, 8 and 75% for conjugate 9.

Hydrophilic Polyhedral Oligomeric Silsesquioxane, POSS(OH)32, as a Complexing Nanocarrier for Doxorubicin and Daunorubicin

A novel strategy, recently developed by us, to use polyhedral oligomeric silsesquioxanes (POSS) as an anti-cancer drug carrier is presented. Anthracycline:POSS complexes were prepared by simple co-addition of doxorubicin (DOX) or daunorubicin (DAU) with hydrophilic POSS(OH)32. Co-delivery of POSS and anthracyclines led to higher anti-cancer activity towards HeLa (cervical cancer endothelial) and MCF-7 (human breast adenocarcinoma) cell lines. The obtained supramolecular hybrid complexes were characterised by nuclear magnetic resonance (NMR) spectroscopy (nuclear Overhauser effect spectroscopy [NOESY] and homonuclear correlation spectroscopy [COSY]), Fourier transform infrared spectroscopy (FTIR), and dynamic light scattering (DLS). The two-dimensional (2D) NOESY spectra of the complexes showed the cross-correlation peaks for hydroxyl groups of POSS (~4.3-4.8 ppm) with OH groups of DOX and DAU. FTIR showed that hydroxyl group of POSS can interact with amine and hydroxyl groups of DOX and DAU. The viability of HeLa and MCF-7 was analysed with the MTT assay to evaluate the cytotoxicity of free DOX and DAU and the relevant complexes with POSS at different molar ratios. At a low DOX concentration (2.5 µM), for molar ratios 1:1, 1:4, and 1:8 (POSS:DOX), the complexes showed two and three times higher cytotoxicity towards HeLa and MCF-7 cells, respectively, than DOX itself after both 24- and 48-h incubation. The 1 µM concentration for a 1:4 POSS:DOX molecular ratio and the 2.5 µM concentration for all complexes were more toxic towards MCF-7 cells than free DOX after 48-h incubation. In the case of POSS:DAU complexes, there was higher toxicity than that of free drug after 48-h incubation. It can be concluded that the formation of non-covalent complexes increases toxicity of anthracycline drugs towards Hela and MCF-7 cells. The novel complexes are inexpensive to prepare and more effective than free drugs at low systemic toxicity.

Kinetic Study of the Thermal and Thermo-Oxidative Degradations of Polystyrene Reinforced with Multiple-Cages POSS

A comprehensive kinetics degradation study is carried out on novel multiple cages polyhedral oligomeric silsesquioxane (POSS)/polystyrene (PS) composites at 5% (w/w) of POSS to assess their thermal behavior with respect to the control PS and other similar POSS/PS systems studied in the past. The composites are synthesized by in situ polymerization of styrene in the presence of POSSs and characterized by 1H-NMR. The characteristics of thermal parameters are determined using kinetics literature methods, such as those developed by Kissinger and Flynn, Wall, and Ozawa (FWO), and discussed and compared with each other and with those obtained in the past for similar POSS/PS composites. A good improvement in the thermal stability with respect to neat polymer is found, but not with respect to those obtained in the past for polystyrene reinforced with single- or double-POSS cages. This behavior is attributed to the greater steric hindrance of the three-cages POSS compared with those of single- or double-cage POSS molecules.

Design, Preparation and Thermal Characterization of Polystyrene Composites Reinforced with Novel Three-Cages POSS Molecules

Novel polystyrene (PS)/polyhedral oligomeric silsequioxanes (POSSs) nanocomposites were designed and prepared by in situ polymerization, using, for the first time, three-cage POSS molecules. The synthesized compounds were first characterized by Fourier transform infrared spectroscopy (FTIR) and ¹H NMR spectroscopy to verify the obtaining of the designed products before their thermal performance was evaluated and compared with those of pristine PS and the corresponding single-cage POSSs nanocomposites. The thermal behaviour was checked by the means of the differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Scanning electron microscopy (SEM) was also used to confirm the hypothesis about the dispersion/aggregation of the POSS molecules into the polymer matrix. The parameters chosen to evaluate the thermal stability of the investigated compounds, namely temperature at 5% of mass loss (T_5%) and solid residue at 700 °C, showed a significant increase in the stability of the polymers reinforced with the three-cages POSS, in comparison to both PS and single-cage POSS reinforced PSs, which therefore turn out to be promising molecular fillers for nanocomposite production.

Insertion of Iron Decorated Organic-Inorganic Cage-Like Polyhedral Oligomeric Silsesquioxanes between Clay Platelets by Langmuir Schaefer Deposition

Tuning the architecture of multilayer nanostructures by exploiting the properties of their constituents is a versatile way to develop multifunctional films. Herein, we report a bottom-up approach for the fabrication of highly ordered hybrid films consisting of dimethyldioctadecylammonium (DODA), iron decorated polyhedral oligomeric silsesquioxanes (POSS), and montmorillonite clay platelets. Clay platelets provided the template where Fe/POSS moieties were grafted by the use of the surfactant. Driven by the iron ions present, DODA adopted a staggered arrangement, which is essential to realize the controllable layer-by-layer growth of the film. The elemental composition of the film was studied by X-ray photoelectron spectroscopy and X-ray reflectivity confirmed the existence of smooth interfaces between the different layers.

Polystyrene Nanocomposites Reinforced with Novel Dumbbell-Shaped Phenyl-POSSs: Synthesis and Thermal Characterization

Two series of novel dumbbell-shaped polyhedral oligomeric silsesquioxanes (POSSs), fully functionalized with phenyl groups at the corner of the silicon cages, were used to prepare polystyrene (PS) nanocomposites through the method of in situ polymerization. The percentage of the molecular filler reinforcement was set as 5% w/w of POSS and was checked by ¹H-NMR spectroscopy. The obtained nanocomposites were characterized by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Thermal and morphological properties were evaluated and compared among the nanocomposites obtained using the two different series of dumbbell-shaped POSSs and with the net PS. The thermal parameters for the prepared nanocomposites were very high when compared with those of neat PS, and they evidenced significant differences when an aliphatic or aromatic bridge was used to link the silicon cages. SEM analysis results allow us to hypothesize a justification for the different resistance to thermal degradation showed by the two series of molecular reinforcement.

Synthesis and Near Infrared Luminescence Properties of a Series of Lanthanide Complexes with POSS Modified Ligands

A polyhedral oligomeric silsesquioxanes (POSS) modified 8-hydroxyquinoline derivative (denoted as Q-POSS) was synthesized and used as a ligand to coordinate with lanthanide ions to obtain a series of lanthanide complexes Ln(Q-POSS)₃ (Ln = Er³⁺, Yb³⁺, Nd³⁺). The as-prepared lanthanide complexes have been characterized by FT-IR, UV⁻Vis, and elemental analysis. All these complexes showed the characteristic near-infrared (NIR) luminescence originated from the corresponding lanthanide ions under excitation. Compared with the unmodified counterparts LnQ₃ (HQ = 8-hydroxyquinoline), the Ln(Q-POSS)₃ complexes showed obviously increased emission intensity, which was ascribed mainly to the steric-hindrance effects of the POSS moiety in the ligands. It is believed that the POSS group could suppress undesired excimer formation and intermolecular aggregation, thus decreasing the concentration quenching effect of the corresponding lanthanide complexes.

Creep, recovery, and stress relaxation behavior of nanostructured bioactive calcium phosphate glass-POSS/polymer composites for bone implants studied under simulated physiological conditions

The creep and recovery and the stress relaxation behaviors of poly(butylene adipate-co-terephthalate) (PBAT) and polyhydroxyalkanoates (PHA) binary blends incorporating 30 wt % of a mixture of trisilanolisobutyl polyhedral oligomeric silsesquioxanes (POSS) and calcium phosphate glass (CaP-g) were investigated under simulated physiological and human body temperature conditions. The synergistic effect of PHA and CaP-g/POSS filler remarkably improved the creep behavior of the PBAT matrix and decreased its residual strain, consequently enhancing its elastic recovery. A considerable increase of the relaxation modulus of the hybrid materials was also observed upon incorporation of PHA and CaP-g/POSS. The relaxation modulus of the neat PBAT sample increased from ~60 MPa to ~1600 MPa after addition of 30 wt % CaP-g/POSS and 70 wt % PHA. However, after exposure of the composites to the simulated human body conditions for 14 days, a drop of dynamic mechanical properties of the studied material systems was observed along with formation of a desirable calcium phosphate phase on the material surface. The long-term (i.e., up to 7 × 10⁵  s) viscoelastic behavior of the studied materials was successfully predicted using the time-temperature superposition principle and the obtained creep strain and the relaxation modulus master curves were satisfactorily fitted to the Findley power law equation and the generalized Maxwell model, respectively. This study demonstrates a facile method for tailoring CaP-g/POSS bioactive glasses composition for bone-like apatite formation on biopolymer surfaces. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 2419-2432, 2019.

The Rediscovery of POSS: A Molecule Rather than a Filler

The use of polyhedral oligomeric silsesquioxanes (POSSs) for making polymer composites has grown exponentially since the last few years of the 20th century. In comparison with the other most commonly used fillers, POSSs possess the advantage of being molecules. Thus, this allows us to combine their nano-sized cage structures, which have dimensions that are similar to those of most polymer segments and produce a particular and exclusive chemical composition. These characteristics linked with their hybrid (inorganic⁻organic) nature allow researchers to modify POSS according to particular needs or original ideas, before incorporating them into polymers. In this present study, we first start with a brief introduction about the reasons for the rediscovery of these nanoparticles over the last 25 years. Starting from the form of POSS that is most widely used in literature (octaisobutyl POSS), this present study aims to evaluate how the reduction of symmetry through the introduction of organic groups favors their dispersion in polystyrene matrix without compromising their solubility.

Modification of Polyhedral Oligomeric Silsesquioxanes (POSS) Molecules by Ruthenium Catalyzed Cross Metathesis

The scope of ruthenium (Ru)-catalyzed cross metathesis (CM) of allyl-decorated polyhedral oligomeric silsesquioxanes (POSS) was explored. A variety of different commercial and non-commercial ruthenium complexes were tested to determine that the nitro-activated Ru catalyst is optimal for this transformation. The reported transformation was used to prepare selected hybrid steroid-POSS compounds.

Hyperbranched Polysiloxanes Based on Polyhedral Oligomeric Silsesquioxane Cages with Ultra-High Molecular Weight and Structural Tuneability

Hyperbranched siloxane-based polymers with ultra-high molecular weight were synthesized by the Piers–Rubinsztajn reaction between octakis(dimethylsiloxy) octasilsesquioxane with different dialkoxysilanes, using tris(pentafluorophenyl) borane as the catalyst. The origin of the high molecular weight is explained by the high reactivity of the catalyst and strain energy of isolated small molecule in which all eight silane groups close into rings on the sides of a single cubic cage. The structural tuneability was further demonstrated by use of methyl(3-chloropropyl)diethoxysilane, which generates a polymer with similar ultra-high molecular weight. Introduction of phosphonate groups through the chloropropyl sites later leads to functionalized polymers which can encapsulate various transition metal nanoparticles.

Effects of ethanol concentrations of acrylate-based dental adhesives on microtensile composite-dentin bond strength and hybrid layer structure of a 10 wt% polyhedral oligomeric silsesquioxane (POSS)-incorporated bonding agent

Background

The aim of this study was to assess for the first time the effects of different amounts of ethanol solvent on the microtensile bond strength of composite bonded to dentin using a polyhedral oligomeric silsesquioxane (POSS)-incorporated adhesive.

Materials and Methods

This experimental study was performed on 120 specimens divided into six groups (in accordance with the ISO TR11405 standard requiring at least 15 specimens per group). Occlusal dentin of thirty human molar teeth was exposed by removing its enamel. Five teeth were assigned to each of six groups and were converted to 20 microtensile rods (with square cross-sections of 1 mm × 1 mm) per group. The "Prime and Bond NT" (as a common commercial adhesive) was used as the control group. Experimental acrylate-based bonding agents containing 10 wt% POSS were produced with five concentrations of ethanol as solvent (0, 20, 31, 39, and 46 wt%). After application of adhesives on dentin surface, composite cylinders (height = 6 mm) were bonded to dentin surface. The microtensile bond strength of composite to dentin was measured. The fractured surfaces of specimens were evaluated under a scanning electron microscope to assess the morphology of hybrid layer. Data were analyzed using one-sample t-test, one-way analysis of variance (ANOVA), and Tukey tests (α = 0.05).

Results

the mean bond strength in the groups: "control, ethanol-free, and 20%, 31%, 39%, and 46% ethanol" was, respectively, 46.5 ± 5.6, 29.4 ± 5.7, 33.6 ± 4.1, 59.0 ± 5.5, 41.9 ± 6.2, and 18.7 ± 4.6 MPa. Overall difference was significant (ANOVA, P < 0.0001). Pairwise differences were all significant (Tukey P < 0.05) except those of "ethanol 0% versus 20%" and "20% versus 31%." All groups except "0% and 46% ethanol" had bond strengths above 30 MPa (t-test P < 0.05).

Conclusion

Incorporation of 31% ethanol as solvent into a 10 wt% POSS-incorporated experimental dental adhesive might increase the bond strength of composite to dentin and improve the quality and morphology of the hybrid layer. However, higher concentrations of the solvent might not improve the bond strength or quality of the hybrid layer.

Candida antarctica Lipase B Immobilized onto Chitin Conjugated with POSS® Compounds: Useful Tool for Rapeseed Oil Conversion

A new method is proposed for the production of a novel chitin-polyhedral oligomeric silsesquioxanes (POSS) enzyme support. Analysis by such techniques as X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the effective functionalization of the chitin surface. The resulting hybrid carriers were used in the process of immobilization of the lipase type b from Candida antarctica (CALB). Fourier transform infrared spectroscopy (FTIR) confirmed the effective immobilization of the enzyme. The tests of the catalytic activity showed that the resulting support-biocatalyst systems remain hydrolytically active (retention of the hydrolytic activity up to 87% for the chitin + Methacryl POSS® cage mixture (MPOSS) + CALB after 24 h of the immobilization), as well as represents good thermal and operational stability, and retain over 80% of its activity in a wide range of temperatures (30-60 °C) and pH (6-9). Chitin-POSS-lipase systems were used in the transesterification processes of rapeseed oil at various reaction conditions. Produced systems allowed the total conversion of the oil to fatty acid methyl esters (FAME) and glycerol after 24 h of the process at pH 10 and a temperature 40 °C, while the Methacryl POSS® cage mixture (MPOSS) was used as a chitin-modifying agent.

Aquaporin-Based Biomimetic Polymeric Membranes: Approaches and Challenges

In recent years, aquaporin biomimetic membranes (ABMs) for water separation have gained considerable interest. Although the first ABMs are commercially available, there are still many challenges associated with further ABM development. Here, we discuss the interplay of the main components of ABMs: aquaporin proteins (AQPs), block copolymers for AQP reconstitution, and polymer-based supporting structures. First, we briefly cover challenges and review recent developments in understanding the interplay between AQP and block copolymers. Second, we review some experimental characterization methods for investigating AQP incorporation including freeze-fracture transmission electron microscopy, fluorescence correlation spectroscopy, stopped-flow light scattering, and small-angle X-ray scattering. Third, we focus on recent efforts in embedding reconstituted AQPs in membrane designs that are based on conventional thin film interfacial polymerization techniques. Finally, we describe some new developments in interfacial polymerization using polyhedral oligomeric silsesquioxane cages for increasing the physical and chemical durability of thin film composite membranes.

Morphology-controlled self-assembly of an organic/inorganic hybrid porphyrin derivative containing polyhedral oligomeric silsesquioxane (POSS)

An organic/inorganic hybrid porphyrin derivative, namely, metal-free tetrakisphenyl porphyrin-polyhedral oligomeric silsesquioxanes (H2 TPP-POSS) was synthesized by azide-alkyne click chemistry. The self-assembly behavior of H2 TPP-POSS was systematically studied in CHCl3 at different concentrations and in solvents with different polarities. Novel nanovesicles could be obtained through the self-assembly of H2 TPP-POSS in CHCl3 at a concentration lower than 10(-4)  m. Diffuse microrods formed at a concentration higher than 10(-4)  M. Additionally, the polarity of the solvent also greatly influenced the assembled morphologies, and a series of assembled morphologies, including crescent-shaped micelles, spherical micelles, doughnut-shaped vesicles, and ordered square sheets, could form in solvents with different polarities.

Biocompatibility of synthetic poly(ester urethane)/polyhedral oligomeric silsesquioxane matrices with embryonic stem cell proliferation and differentiation

Incorporation of polyhedral oligomeric silsesquioxanes (POSS) into poly(ester urethanes) (PEU) as a building block results in a PEU/POSS hybrid polymer with increased mechanical strength and thermostability. An attractive feature of the new polymer is that it forms a porous matrix when cast in the form of a thin film, making it potentially useful in tissue engineering. In this study, we present detailed microscopic analysis of the PEU/POSS matrix and demonstrate its biocompatibility with cell culture. The PEU/POSS polymer forms a continuous porous matrix with open pores and interconnected grooves. From SEM image analysis, it is calculated that there are about 950 pores/mm(2) of the matrix area with pore diameter size in the range 1-15 µm. The area occupied by the pores represents approximately 7.6% of the matrix area. Using mouse embryonic stem cells (ESCs), we demonstrate that the PEU/POSS matrix provides excellent support for cell proliferation and differentiation. Under the cell culture condition optimized to maintain self-renewal, ESCs grown on a PEU/POSS matrix exhibit undifferentiated morphology, express pluripotency markers and have a similar growth rate to cells grown on gelatin. When induced for differentiation, ESCs underwent dramatic morphological change, characterized by the loss of clonogenecity and increased cell size, with well-expanded cytoskeleton networks. Differentiated cells are able to form a continuous monolayer that is closely embedded in the matrix. The excellent compatibility between the PEU/POSS matrix and ESC proliferation/differentiation demonstrates the potential of using PEU/POSS polymers in future ESC-based tissue engineering.