Fiber Bragg Gratings Sensor Strain-Optic Behavior with Different Polymeric Coatings Subjected to Transverse Strain

This research work is based on a previous study by the authors that characterized the behavior of FBG sensors with a polyimide coating in a structural monitoring system. Sensors applied to structural health monitoring are affected by the presence of simultaneous multidirectional strains. The previous study observed the influence of the transverse strain (εy) while keeping the longitudinal strain constant (εx), where the x direction is the direction of the optical fiber. The present study develops an experimental methodology consisting of a biaxial test plan on cruciform specimens with three embedded FBG sensors coated with polyimide, acrylate, and ORMOCER®. Applying the Strain-Optic Theory as a reference, a comparison of the experimental values obtained with the different coatings was studied. This experimental work made it possible to study the influence of the transverse strain (εy) on the longitudinal measurements of each FBGS and the influence of the coating material. Finally, the calibration procedure was defined as well as K (strain sensitivity factor) for each sensor.

Modular Design of Functional Glucose Monomer and Block Co-Polymer toward Stable Zn Anodes

Aqueous Zn batteries employing mildly acidic electrolytes have emerged as promising contenders for safe and cost-effective energy storage solutions. Nevertheless, the intrinsic reversibility of the Zn anode becomes a focal concern due to the involvement of acidic electrolyte, which triggers Zn corrosion and facilitates the deposition of insulating byproducts. Moreover, the unregulated growth of Zn over cycling amplifies the risk of internal short-circuiting, primarily induced by the formation of Zn dendrites. In this study, a class of glucose-derived monomers and a block copolymer are synthesized through a building-block assembly strategy, ultimately leading to uncover the optimal polymer structure that suppresses the Zn corrosion while allowing efficient ion conduction with a substantial contribution from cation transport. Leveraging these advancements, remarkable enhancements are achieved in the realm of Zn reversibility, exemplified by a spectrum of performance metrics, including robust cycling stability without voltage overshoot and short-circuiting during 3000 h of cycling, stable operation at a high depth of charge/discharge of 75% and a high current density, >95% Coulombic efficiency over 2000 cycles, successful translation of the anode improvement to full cell performance. These polymer designs offer a transformative path based on the modular synthesis of polymeric coatings toward highly reversible Zn anode.

Enhancement of Strawberry Shelf Life via a Multisystem Coating Based on Lippia graveolens Essential Oil Loaded in Polymeric Nanocapsules

Strawberries (Fragaria xannanasa) are susceptible to mechanical, physical, and physiological damage, which increases their incidence of rot during storage. Therefore, a method of protection is necessary in order to minimize quality losses. One way to achieve this is by applying polymer coatings. In this study, multisystem coatings were created based on polymer nanocapsules loaded with Lippia graveolens essential oil, and it was found to have excellent optical, mechanical, and water vapor barrier properties compared to the control (coating formed with alginate and with nanoparticles without the essential oil). As for the strawberries coated with the multisystem formed from the polymer nanocapsules loaded with the essential oil of Lippia graveolens, these did not present microbial growth and only had a loss of firmness of 17.02% after 10 days of storage compared to their initial value. This study demonstrated that the multisystem coating formed from the polymer nanocapsules loaded with the essential oil of Lippia graveolens could be a viable alternative to preserve horticultural products for longer storage periods.

A Study of PLA Thin Film on SS 316L Coronary Stents Using a Dip Coating Technique

The dip coating process is one of the recognized techniques used to generate polymeric coatings on stents in an easy and low-cost way. However, there is a lack of information about the influence of the process parameters of this technique on complex geometries such as stents. This paper studies the dip coating process parameters used to provide a uniform coating of PLA with a 4-10 µm thickness. A stainless-steel tube (AISI 316L) was laser-cut, electropolished, and dip-coated in a polylactic acid (PLA) solution whilst changing the process parameters. The samples were characterized to examine the coating's uniformity, thickness, surface roughness, weight, and chemical composition. FTIR and Raman investigations indicated the presence of PLA on the stent's surface, the chemical stability of PLA during the coating process, and the absence of residual chloroform in the coatings. Additionally, the water contact angle was measured to determine the hydrophilicity of the coating. Our results indicate that, when using entry and withdrawal speeds of 500 mm min-1 and a 15 s immersion time, a uniform coating thickness was achieved throughout the tube and in the stent with an average thickness of 7.8 µm.

Highly Self-Healable Polymeric Coating Materials Based on Charge Transfer Complex Interactions with Outstanding Weatherability

In this study, we prepare highly self-healable polymeric coating materials using charge transfer complex (CTC) interactions. The resulting coating materials demonstrate outstanding thermal stability (1 wt% loss thermal decomposition temperature at 420 °C), rapid self-healing kinetics (in 5 min), and high self-healing efficiency (over 99%), which is facilitated by CTC-induced multiple interactions between the polymeric chains. In addition, these materials exhibit excellent optical properties, including transmittance over 91% and yellow index (YI) below 2, and show enhanced weatherability with a ΔYI value below 0.5 after exposure to UV light for 72 h. Furthermore, the self-healable coating materials developed in this study show outstanding mechanical properties by overcoming the limitations of conventional self-healing materials.

Polymer Coated Functional Catalysts for Industrial Applications

Surface engineering of conventional catalysts using polymeric coating has been extensively explored for producing hybrid catalytic material with enhanced activity, high mechanical and thermal stability, enhanced productivity, and selectivity of the desired product. The present review discusses in detail the state-of-the-art knowledge on surface modification of catalysts, namely photocatalysts, electrocatalysts, catalysts for photoelectrochemical reactions, and catalysts for other types of reactions, such as hydrodesulfurization, carbon dioxide cycloaddition, and noble metal-catalyzed oxidation/reduction reactions. The various techniques employed for the polymer coating of catalysts are discussed and the role of polymers in enhancing the catalytic activity is critically analyzed. The review further discusses the applications of biodegradable and biocompatible natural polysaccharide-based polymers, namely, chitosan and polydopamine as prospective coating material.

Polymeric Coatings and Antimicrobial Peptides as Efficient Systems for Treating Implantable Medical Devices Associated-Infections

Many infections are associated with the use of implantable medical devices. The excessive utilization of antibiotic treatment has resulted in the development of antimicrobial resistance. Consequently, scientists have recently focused on conceiving new ways for treating infections with a longer duration of action and minimum environmental toxicity. One approach in infection control is based on the development of antimicrobial coatings based on polymers and antimicrobial peptides, also termed as “natural antibiotics”.

The Role of Surface Chemistry in the Efficacy of Protein and DNA Microarrays for Label-Free Detection: An Overview

The importance of microarrays in diagnostics and medicine has drastically increased in the last few years. Nevertheless, the efficiency of a microarray-based assay intrinsically depends on the density and functionality of the biorecognition elements immobilized onto each sensor spot. Recently, researchers have put effort into developing new functionalization strategies and technologies which provide efficient immobilization and stability of any sort of molecule. Here, we present an overview of the most widely used methods of surface functionalization of microarray substrates, as well as the most recent advances in the field, and compare their performance in terms of optimal immobilization of the bioreceptor molecules. We focus on label-free microarrays and, in particular, we aim to describe the impact of surface chemistry on two types of microarray-based sensors: microarrays for single particle imaging and for label-free measurements of binding kinetics. Both protein and DNA microarrays are taken into consideration, and the effect of different polymeric coatings on the molecules' functionalities is critically analyzed.

Dual-Functional Iron Oxide Nanoparticles Coated with Polyvinyl Alcohol/5-Fluorouracil/Zinc-Aluminium-Layered Double Hydroxide for a Simultaneous Drug and Target Delivery System

Iron oxide nanoparticles are suitable for biomedical applications owing to their ability to anchor to various active agents and drugs, unique magnetic properties, nontoxicity, and biocompatibility. In this work, the physico-chemical and magnetic properties, as well as the cytotoxicity, of Fe₃O₄ nanoparticles coated with a polymeric carrier and loaded with a 5-fluorouracil (5-FU) anti-cancer drug are discussed. The synthesized Fe₃O₄ nanoparticles were coated with polyvinyl alcohol and Zn/Al-layered double hydroxide as the drug host. The XRD, DTA/TG, and FTIR analyzes confirmed the presence of the coating layer on the surface of nanoparticles. The results showed a decrease in saturation magnetization of bare Fe₃O₄ nanoparticles after coating with the PVA/5FU/Zn/Al-LDH layer. In addition, the presence of the coating prevented the agglomeration of nanoparticles. Furthermore, the pseudo-second-order equation governed the kinetics of drug release. Finally, the coated nanoparticles showed stronger activity against liver cancer cells (HepG2) compared to that of the naked 5-FU drug, and displayed no cytotoxicity towards 3T3 fibroblast cell lines. The results of the present study demonstrate the potential of a nano delivery system for cancer treatment.

Mussel-Inspired Polymeric Coatings to Realize Functions from Single and Dual to Multiple Antimicrobial Mechanisms

Numerous efforts to fabricate antimicrobial surfaces by simple yet universal protocols with high efficiency have attracted considerable interest but proved to be particularly challenging. Herein, we designed and fabricated a series of antimicrobial polymeric coatings with different functions from single to multiple mechanisms by selectively utilizing diethylene glycol diglycidyl ether (PEGDGE), polylysine, and poly[glycidylmethacrylate-co-3-(dimethyl(4-vinylbenzyl)ammonium)propyl sulfonate] (poly(GMA-co-DVBAPS)) via straightforward mussel-inspired codeposition techniques. Bactericidal polylysine endowed the modified surfaces with a high ability (∼90%) to kill attached bacteria, while PEGDGE components with unique surface hydration prevented bacterial adhesion, avoiding the initial biofilm formation. Moreover, excellent salt-responsive poly(GMA-co-DVBAPS) enabled reactant polymeric coatings to change chain conformations from shrinkable to stretchable state and subsequently release >90% attached bacteria when treated with NaCl solution, even after repeated cycles. Therefore, the obtained polymeric coatings, polydopamine/poly(GMA-co-DVBAPS) (PDA/PDV), polydopamine/polylysine/poly(GMA-co-DVBAPS) (PDA/l-PDV), and polydopamine/polylysine/poly(GMA-co-DVBAPS)/diethylene glycol diglycidyl ether (PDA/l-PDV-PEGDGE), controllably realized functions from single and dual to multiple antimicrobial mechanisms, as evidenced by long-term antifouling activity to bacteria, high bactericidal efficiency, and salt-responsive bacterial regeneration performance with several bacterial killing-release cycles. This study not only contributes to mussel-inspired chemistry for polymeric coatings with controllable functions but also provides a series of reliable and highly efficient antimicrobial surfaces for potential biomedical applications.

Development of polyurethane-based superhydrophobic coatings on steel surfaces

In this study, a superhydrophobic coating on steel surface has been developed with polyurethane, SiO₂ nanoparticles and hexadecyltrimethoxysilane by using a spin-coating technique. Characterization of the coated steel surface was done by using the contact angle measurement technique, scanning electron microscopy and Fourier transform infrared spectroscopy. With a water tilt angle of 4° ± 2° and static contact angle of 165° ± 5°, the coated surface shows a superhydrophobic and self-cleaning nature. Chemical, thermal, mechanical stability tests and droplet dynamic studies were done to evaluate performance of the coating. Excellent self-cleaning, anti-fogging and anti-corrosion properties of coated steel surfaces make them ideal for industrial applications. This article is part of the theme issue 'Bioinspired materials and surfaces for green science and technology (part 3)'.

Dual-Cross-Linked Supramolecular Polysiloxanes for Mechanically Tunable, Damage-Healable and Oil-Repellent Polymeric Coatings

Polymeric coatings that show tunable mechanical strength, healing ability of mechanical damage, and proper liquid repellency will be promising in various areas across life and industry. However, the exploitation of such coating materials is largely limited by their molecular design. In this work, polymeric coatings with ion-controlled mechanics and coloration and damage-healing and oil-sliding properties have been demonstrated based on a supramolecular design of dual-cross-linked polysiloxanes. The coating color and mechanical properties can be adjusted by coordinative metal ions with various metal-ligand binding abilities. Dense and dynamic hydrogen bonds and coordination bonds lead to the ready healing ability and high durability of the coating. The extreme smoothness of the flat silicone coating facilitates not only the sliding of impinging oil but also the restoration of topological integrity from mechanical damage. The coating can be selectively patterned and applied to large-scale substrates by diverse coating operations, making it feasible for versatile applications.

Green and Rapid Synthesis of Durable and Super-Oil (under Water) and Water (in Air) Repellent Interfaces

In this letter, a single polymer is rapidly and covalently transformed into a chemically reactive and functional bulk polymeric coatings through a catalyst-free mutual chemical reaction between acrylates and amine groups at ambient condition-in the absence of any external reaction solvent, which is unprecedented in the literature. This facile and green chemical approach provided a common basis for achieving two distinct biomimicked wettabilities-that are superhydrophobicity (lotus-leaf mimicked) in air and superoleophobicity (fish-scale inspired) under water. The essential chemistry that conferred bioinspired wettability was optimized in the hierarchically featured polymeric material by postcovalent modulation of chemically reactive polymeric material with primary-amine-containing small moleculess, glucamine and octadecylamine. The inherently sticky and "chemically reactive" polymeric material having appropriate hierarchical topography is highly capable of providing substrate-independent (irrespective of chemical compositions and mechanical strength of the substrates) stable coatings with robust bioinspired (i.e., lotus leaf and fish scale) wettability.

Strength, toughness, and reliability of a porous glass/biopolymer composite scaffold

Development of bioactive glass and ceramic scaffolds intended for the reconstruction of large segmental bone defects remains a challenge for materials science due to the complexities involved in clinical implantation, bone-implant reaction, implant degradation and the multiple loading modes the implants subjected to. A comprehensive evaluation of the mechanical properties of inorganic scaffolds and exploration of new ways to toughen brittle constructs are critical prior to their successful application in loaded sites. A simple and widely adopted approach involves the coating of an inorganic scaffold with a polymeric material. In this work, a systematic evaluation of the influence of a biopolymer, polycaprolactone (PCL), coating on the mechanical performance of bioactive glass scaffolds was carried out. Results from this work indicate that a biopolymer PCL coating was more effective in increasing the compressive strength and reliability of the glass scaffold under compression, but less effective in improving its flexural strength or fracture toughness. This is the first report that reveals the limited successfulness of a polymer coating in improving the toughness of strong scaffolds, suggesting that new and novel ways of toughening inorganic scaffolds should be future research directions for scaffolds applied in loaded sites. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1209-1217, 2018.

Engineered magnetic nanoparticles for biomedical applications

In the past decades, magnetic nanoparticles (MNPs) have been used in wide range of diverse applications, ranging from separation to sensing. Here, synthesis and applications of functionalized MNPs in the biomedical field are discussed, in particular in drug delivery, imaging, and cancer therapy, highlighting also recent progresses in the development of multifunctional and stimuli-responsive MNPs. The role of their size, composition, and surface functionalization is analyzed, together with their biocompatibility issues.