Large-Area Flexible Carbon Nanofilms with Synergistically Enhanced Transmittance and Conductivity Prepared by Reorganizing Single-Walled Carbon Nanotube Networks

Large-area flexible transparent conductive films (TCFs) are highly desired for future electronic devices. Nanocarbon TCFs are one of the most promising candidates, but some of their properties are mutually restricted. Here, a novel carbon nanotube network reorganization (CNNR) strategy, that is, the facet-driven CNNR (FD-CNNR) technique, is presented to overcome this intractable contradiction. The FD-CNNR technique introduces an interaction between single-walled carbon nanotube (SWNT) and Cu─-O. Based on the unique FD-CNNR mechanism, large-area flexible reorganized carbon nanofilms (RNC-TCFs) are designed and fabricated with A3-size and even meter-length, including reorganized SWNT (RSWNT) films and graphene and RSWNT (G-RSWNT) hybrid films. Synergistic improvement in strength, transmittance, and conductivity of flexible RNC-TCFs is achieved. The G-RSWNT TCF shows sheet resistance as low as 69 Ω sq-1 at 86% transmittance, FOM value of 35, and Young's modulus of ≈45 MPa. The high strength enables RNC-TCFs to be freestanding on water and easily transferred to any target substrate without contamination. A4-size flexible smart window is fabricated, which manifests controllable dimming and fog removal. The FD-CNNR technique can be extended to large-area or even large-scale fabrication of TCFs and can provide new insights into the design of TCFs and other functional films.

Optoelectrical Properties of Transparent Conductive Films Fabricated with Ag Nanoparticle-Suspended Emulsion under Various Formulations and Coating Conditions

Transparent conductive films (TCFs) were fabricated through bar-coating with a water-in-toluene emulsion containing Ag nanoparticles (AgNPs). Morphological changes in the self-assembled TCF networks under different emulsion formulations and coating conditions and the corresponding optoelectrical properties were investigated. In preparing various emulsions, the concentration of AgNPs and the water weight fraction were important factors for determining the size of the water droplets, which plays a decisive role in controlling the optoelectrical properties of the TCFs affected by open cells and conductive lines. An increased concentration of AgNPs and decreased water weight fraction resulted in a decreased droplet size, thus altering the optoelectrical properties. The coating conditions, such as coating thickness and drying temperature, changed the degree of water droplet coalescence due to different emulsion drying rates, which also affected the final self-assembled network structure and optoelectrical properties of the TCFs. Systematically controlling various material and process conditions, we explored a coating strategy to enhance the optoelectrical properties of TCFs, resulting in an achieved transmittance of 86 ± 0.2%, a haze of 4 ± 0.2%, and a sheet resistance of 35 ± 2.8 Ω/□. TCFs with such optimal properties can be applied to touch screen fields.

High Temperature-Resistant Transparent Conductive Films for Photoelectrochemical Devices Based on W/Ag Composite Nanonetworks

The traditional Ag nanowire preparation means that it cannot meet the demanding requirements of photoelectrochemical devices due to the undesirable conductivity, difficulty in compounding, and poor heat resistance. Here, we prepared an Ag nanonetwork with superior properties using a special template method based on electrospinning technology. The transparent conductive films based on Ag nanonetworks have good transmittance in a wide range from ultraviolet to visible. It is important that the films have high operability and are easy to be compounded with other materials. After compounding with high-melting-point W metal, the heat-resistance temperature of the W/Ag composite transparent conductive films is increased by 100 °C to 460 °C, and the light transmission and electrical conductivity of the films are not significantly affected. All experimental phenomena in the study are analyzed theoretically. This research can provide an important idea for the metal nanowire electrode, which is difficult to be applied to the photoelectrochemical devices.

Comparative Study on Preparation Methods for Transparent Conductive Films Based on Silver Nanowires

Silver nanowires, which have high optoelectronic properties, have the potential to supersede indium tin oxide in the field of electrocatalysis, stretchable electronic, and solar cells. Herein, four mainstream experimental methods, including Mayer-rod coating, spin coating, spray coating, and vacuum filtration methods, are employed to fabricate transparent conductive films based on the same silver nanowires to clarify the significance of preparation methods on the performance of the films. The surface morphology, conductive property, uniformity, and flexible stability of these four Ag NW-based films, are analyzed and compared to explore the advantages of these methods. The transparent conductive films produced by the vacuum filtration method have the most outstanding performance in terms of surface roughness and uniformity, benefitting from the stronger welding of NW-NW junctions after the press procedure. However, limited by the size of the membrane and the vacuum degree of the equipment, the small-size Ag films used in precious devices are appropriate to obtain through this method. Similarly, the spin coating method is suited to prepare Ag NWs films with small sizes, which shows excellent stability after the bending test. In comparison, much larger-size films could be obtained through Mayer-rod coating and spray coating methods. The pull-down speed and force among the Mayer-rod coating process, as well as the spray distance and traveling speed among the spray coating process, are essential to the uniformity of Ag NW films. After being treated with NaBH₄ and polymethyl methacrylate (PMMA), the obtained Ag NW/PMMA films show great potential in the field of film defogging due to the Joule heating effect. Taken together, based on the advantages of each preparation method, the Ag NW-based films with desired size and performances are easier to prepare, meeting the requirements of different application fields.

Stable Doping of Single-Walled Carbon Nanotubes for Flexible Transparent Conductive Films

Possessing excellent electronic and mechanical properties and great stability, single-walled carbon nanotubes (SWCNTs) are exceptionally attractive in fabricating flexible transparent conductive films. Doping is a key step to further enhance the conductivity of the SWCNT films and the reliable doping is highly needed. We developed a feasible strategy that uses solid acids such as phosphotungstic acid (PTA) to dope the SWCNT films stably relying on the nonvolatility of the dopants. The sheet resistance of the films was reduced to around a half of the original value meanwhile with no obvious change in transmittance. The doping effect maintained during a 700 days' observation. The excellent flexibility of the PTA-doped films was demonstrated by a bending test of 1000 cycles, during which the sheet resistance and transmittance was basically unaffected. The blue shifts of G band in the Raman spectra and the increase of work function measured by the Kelvin probe force microscopy both reveal the p-type doping of the films by PTA. The strong acidity of PTA plays a key role in the doping effect by increasing the redox potential of the ambient O₂ and thus the Fermi level of the SWCNTs is brought down. The great feasibility and robustness of our doping strategy are desirable in the practical application of SWCNT-based flexible transparent conductive films. This strategy can be extended to the p-type doping of various CNT-based assemblies (such as sponges and forests) as well as other material families, expanding the application spectrum of polyacids.

Broad-Spectrum Ultrathin-Metal-Based Oxide/Metal/Oxide Transparent Conductive Films for Optoelectronic Devices

High-quality transparent conductive materials are beneficial to improve the charge transfer and light transmittance and reduce the interface defects as well as the production cost of optoelectronic devices. A high threshold thickness of metal layer in oxide/metal/oxide (OMO) compound thin films leads to strong reflectance, especially in the near-infrared region, limiting the broad-spectrum device applications. Here, we propose a novel Zn doping strategy using the low-cost single-target sputtering technology to achieve the growth of Ag-Zn thin films (i.e., Zn-doped Ag) and introduce a trace amount of O₂ to further obtain ultrathin Ag-Zn(O) films (thin-film thickness d ≤ 5 nm), which greatly improves the broad-spectrum characteristics of OMO films. Heterogeneous metal and gas doping technology effectively promotes the formation of two-dimensional continuous film growth. By combining the ultrathin Ag-Zn(O) layer with the MGZO (i.e., Mg- and Ga co-doped ZnO) oxide film grown by reactive plasma deposition, a typical broad-spectrum MGZO/Ag-Zn(O)/MGZO (50/5/50 nm)-OMO compound thin film exhibits an average transmittance of 91.6% in the wavelength range of 400-1200 nm and low sheet resistance. The broad-spectrum organic solar cells based on MGZO/Ag-Zn(O)/MGZO electrodes present a high power conversion efficiency of 15.35%, superior to those devices based on single-layer oxide electrodes. The distinguished performances are attributed to the ultrathin Ag-Zn(O) films in OMO, paving the way for applications in broad-spectrum optoelectronic and flexible electronic devices.

Preparation of Device-Level ZnO-Covered Silver Nanowires Films and Their Applications as Sub-Electrode for Polymer Solar Cells

Silver nanowire films are good candidates to be used as transparent conductive films that could be widely utilized in organic photoelectronic devices such as polymer solar cells. However, their application is usually limited, as they are mainly used as top electrode materials; otherwise, they would be prone to complex transferring processes. In this study, we successfully prepared device-level ZnO-covered silver nanowire (AgNWs/ZnO) films. ZnO was prepared by a spray pyrolysis method using zinc-ammonia solution at a relatively low temperature (95°C). The films showed good adhesive properties to the glass substrate, considering it withstood the process of applying polyimide tapes on the surface and tearing them off more than 100 times. It also exhibited good conductivity (∼24 Ω/sq) with high transmittance in the visible range (>80%). After a simple polish and patterning, AgNWs/ZnO showed a good performance as a sub-electrode for polymer solar cells. The PM6:Y6 devices achieved a high power conversion efficiency of 8.37% with an open-circuit voltage of 0.81 V, a short-circuit current density of 18.18 mA/cm², and a yield of 81.25%. This indicates that the technology has a good prospect of large-scale fabrication of organic photoelectronic devices.

Research Progress of Transparent Electrode Materials with Sandwich Structure

The nonrenewable nature of fossil energy has led to a gradual decrease in reserves. Meanwhile, as society becomes increasingly aware of the severe pollution caused by fossil energy, the demand for clean energy, such as solar energy, is rising. Moreover, in recent years, electronic devices with screens, such as mobile phones and computers, have had increasingly higher requirements for light transmittance. Whether in solar cells or in the display elements of electronic devices, transparent conductive films directly affect the performance of these devices as a cover layer. In this context, the development of transparent electrodes with low sheet resistance and high light transmittance has become one of the most urgent issues in related fields. At the same time, conventional electrodes can no longer meet the needs of some of the current flexible devices. Because of the high sheet resistance, poor light transmittance, and poor bending stability of the conventional tin-doped indium tin oxide conductive film and fluorine-doped tin oxide transparent conductive glass, there is a need to find alternatives with better performance. In this article, the progress of research on transparent electrode materials with sandwich structures and their advantages is reviewed according to the classification of conductive materials to provide reference for research in related fields.

High-Performance Flexible Transparent Conductive Films Enabled by a Commonly Used Antireflection Layer

Recently, silver nanowire-based transparent conductive films (AgNW-based TCFs) with excellent comprehensive performance have aroused wide and great interest. However, it is always difficult to simultaneously improve the performances of TCFs in all aspects. In this work, by introducing silica nanoparticles (SiO₂-NPs) with a smaller particle size, several properties of AgNW-based TCFs were optimized successfully. The transmittance and conductivity were improved simultaneously, and smaller particle size was proven to be more suitable to achieve TCFs with excellent optoelectrical properties. Typically, an AgNW/SiO₂-based TCF with a sheet resistance of 250 Ω/sq and transmittance of 93.6% (including the poly (ethylene terephthalate) substrate, abbreviated as PET) could be obtained by using SiO₂-NPs with a size of ∼21 nm, and this transmittance is even higher than that of the bare PET (91.8%) substrate. We demonstrated that the layer formed through self-assembly of SiO₂-NPs can cut down the light scattering on the AgNW surface through total reflection, thus leading to a low haze of AgNW/SiO₂-based TCFs. Very interestingly, the SiO₂-NPs conducted away most of the heat generated during laser ablation, protecting the AgNWs from excessive melt and PET from empyrosis, and thus ensuring the TCFs with high transmittance and patterning accuracy. Besides, AgNW/SiO₂-based TCFs have smaller surface roughness, better flexibility, and adhesive force. To the best of our knowledge, the comprehensive performance of the AgNW/SiO₂-based TCFs reaches the highest level among recently reported novel TCFs.

Optimization of Optoelectronic Properties of Patterned Single-Walled Carbon Nanotube Films

We propose a novel strategy to enhance optoelectrical properties of single-walled carbon nanotube (SWCNT) films for transparent electrode applications by film patterning. First, we theoretically considered the effect of the conducting pattern geometry on the film quality factor and then experimentally examined the calculated structures. We extend these results to show that the best characteristics of patterned SWCNT films can be achieved using the combination of initial film properties: low transmittance and high conductivity. The proposed strategy allows the patterned layers of SWCNTs to outperform the widely used indium-tin-oxide electrodes on both flexible and rigid substrates.

Transparent and Freestanding Single-Walled Carbon Nanotube Films Synthesized Directly and Continuously via a Blown Aerosol Technique

Single-walled carbon nanotube (SWCNT) films are promising materials as flexible transparent conductive films (TCFs). Here, inspired by the extrusion blown plastic film technique and the SWCNT synthesis approach by floating catalyst chemical vapor deposition (FCCVD), a novel blown aerosol chemical vapor deposition (BACVD) method is reported to directly and continuously produce freestanding SWCNT TCFs at several hundred meters per hour. The synthesis mechanism, involving blowing a stable aerosol bubble and transforming the bubble into an aerogel, is investigated, and a general phase diagram is established for this method. For the SWCNT TCFs via BACVD, both carbon conversion efficiency and SWCNT TCF yield can reach three orders of magnitude higher than those with the conventional FCCVD. The film displays a sheet resistance of 40 ohm sq^-1 at 90% transmittance after being doped, representing the record performance based on large-scale SWCNT films. Transparent, flexible, and stretchable electrodes based on BACVD films are demonstrated. Moreover, this high-throughput method of producing SWCNT TCFs can be compatible with the roll-to-roll process for mass production of flexible displays, touch screens, solar cells, and solid-state lighting, and is expected to have a broad and long-term impact on many fields from consumer electronics to energy conversion and generation.

Rapid and Facile Synthesis of High-Performance Silver Nanowires by A Halide-Mediated, Modified Polyol Method for Transparent Conductive Films

Silver nanowires are receiving increasing attention as a kind of prospective transparent and conductive material. Here, we successfully synthesized high-performance silver nanowires with a significantly decreased reaction time by a modified polyol method. The synthesis process involved the addition of halides, including NaCl and NaBr, to control the release rate of Ag⁺ ions, as Cl^- and Br^- ions react with Ag⁺ ions to form AgCl and AgBr with different solubilities. As a result, Ag⁺ ions could be slowly released by graded dissolution, and the formation of silver nanowires was promoted. The results showed that the concentration of the added halides played an important role in the morphology of the final product. High-quality silver nanowires with an average diameter of 70 nm and average length of 21 μm were obtained by optimizing the reaction parameters. Afterwards, a simple silver nanowire coating was applied in order to fabricate the transparent conductive films. The film that was based on the silver nanowires provided a transmittance of 91.2% at the 550 nm light wavelength and a sheet resistance of about 78.5 Ω·sq^-1, which is promising for applications in flexible and transparent optoelectronic devices.

Ultra-Uniform and Very Thin Ag Nanowires Synthesized via the Synergy of Cl-, Br- and Fe3+ for Transparent Conductive Films

The properties and applications of Ag nanowires (AgNWs) are closely related to their morphology and composition. Therefore, controlling the growth process of AgNWs is of great significance for technological applications and fundamental research. Here, silver nanowires (AgNWs) were synthesized via a typical polyol method with the synergistic effect of Cl⁻, Br⁻, and Fe³⁺ mediated agents. The synergistic impact of these mediated agents was investigated intensively, revealing that trace Fe³⁺ ions provided selective etching and hindered the strong etching effect from Cl⁻ and Br⁻ ions. Controlling this synergy allowed the obtainment of highly uniform AgNWs with sub-30 nm diameter and an aspect ratio of over 3000. Transparent conductive films (TCFs) based on these AgNWs without any post-treatment showed a very low sheet resistance of 4.7 Ω sq⁻¹, a low haze of 1.08% at a high optical transmittance of 95.2% (at 550 nm), and a high figure of merit (FOM) of 1210. TCFs exhibited a robust electrical performance with almost unchanged resistance after 2500 bending cycles. These excellent high-performance characteristics demonstrate the enormous potential of our AgNWs in the field of flexible and transparent materials.

Fabrication of High-Performance Silver Mesh for Transparent Glass Heaters via Electric-Field-Driven Microscale 3D Printing and UV-Assisted Microtransfer

Great challenges remain concerning the cost-effective manufacture of high-performance metal meshes for transparent glass heaters (TGHs). Here, a high-performance silver mesh fabrication technique is proposed for TGHs using electric-field-driven microscale 3D printing and a UV-assisted microtransfer process. The results show a more optimal trade-off in sheet resistance (R_s = 0.21 Ω sq^-1 ) and transmittance (T = 93.9%) than for indium tin oxide (ITO) and ITO substitutes. The fabricated representative TGH also exhibits homogeneous and stable heating performance, remarkable environmental adaptability (constant R_s for 90 days), superior mechanical robustness (R_s increase of only 0.04 in harsh conditions-sonication at 100 °C), and strong adhesion force with a negligible increase in R_s (2-12%) after 100 peeling tests. The practical viability of this TGH is successfully demonstrated with a deicing test (ice cube: 21 cm³ , melting time: 78 s, voltage and glass thickness: 4 V, 5 mm). All of these advantages of the TGHs are attributed to the successful fabrication of silver meshes with high resolution and high aspect ratio on the glass substrate using the thick film silver paste. The proposed technique is a promising new tool for the inexpensive fabrication of high-performance TGHs.

Water-Based Purification of Ultrathin Silver Nanowires toward Transparent Conductive Films with a Transmittance Higher than 99

Ultrathin silver nanowires (UTAgNWs) are indispensable to achieve transparent conductive films (TCFs) with overall optoelectronic performance exceeding that of the state-of-the-art indium tin oxide films. Impurities in raw UTAgNW products severely impair the optical properties of TCFs. Unfortunately, highly effective and environment-friendly approaches for purification of UTAgNWs are still lacking. Herein, we report the purification of UTAgNWs using deionized water along with a small amount of surfactants as the purifying agent. TCFs coated with the purified UTAgNWs exhibit a light transmittance of 97.9% and a haze of 1.22% at a sheet resistance of 36.3 Ω sq^-1 or a light transmittance of 99.8% and a haze of 0.47% at a sheet resistance of 187.3 Ω sq^-1. Both the transmittance and the haze are among the best reported values for AgNW TCFs in the literature. The purification process does not involve any toxic or hazardous chemicals and is both scalable and cost-effective.

Enhancement of the Conductivity and Uniformity of Silver Nanowire Flexible Transparent Conductive Films by Femtosecond Laser-Induced Nanowelding

In order to improve the performance of silver nanowire (AgNW) flexible transparent conductive films (FTCFs), including the conductivity, uniformity, and reliability, the welding of high repetition rate femtosecond (fs) laser is applied in this work. Fs laser irradiation can produce local enhancement of electric field, which induce melting at the gap of the AgNWs and enhance electrical conductivity of nanowire networks. The overall resistivity of the laser-welded AgNW FTCFs reduced significantly and the transparency changed slightly. Meanwhile, PET substrates were not damaged during the laser welding procedure in particular parameters. The AgNW FTCFs can achieve a nonuniformity factor of the sheet resistance as 4.6% at an average sheet resistance of 16.1 Ω/sq and transmittance of 91%. The laser-welded AgNW FTCFs also exhibited excellent reliability against mechanical bending over 10,000 cycles. The welding process may open up a new approach for improvement of FTCFs photoelectric property and can be applied in the fabrication of silver nanostructures for flexible optoelectronic and integration of functional devices.

Tackling the Stability Issues of Silver Nanowire Transparent Conductive Films through FeCl₃ Dilute Solution Treatment

Silver nanowires (AgNWs) have been investigated as alternatives to indium tin oxide in transparent conductive films (TCFs) for electronics. However, AgNW TCFs still pose stability issues when exposed to thermal, chemical, and mechanical stimuli. Herein, we demonstrate a facile and effective route to improve stability by treating the films with dilute ferric chloride solution. Our results indicate that after treatment the films exhibit a dramatically enhanced stability against aging, high temperature oxidation, chemical etching, sulfurization, and mechanical straining. Size-dependent instability is fully explored and explained regarding surface atomic diffusion, which could be blocked by enhancing the activation energy of surface diffusion through forming a AgCl cap under ferric chloride solution treatment. Chemisorption-related Fermi level shift of silver nanowires is applied to tune their chemical reactivity to ferric chloride solution for balancing between size-dependent stability improvement and maintaining optoelectrical properties. Owing to the dilute treatment solution, the treated films exhibit a negligible change in light transmittance, whereas sheet resistance decreases by 30% and flexibility increases because of capillary-force-induced welding of contacting AgNWs and AgCl layer mediated tightening. These findings are significant for real-world applications of AgNW TCFs.

Printable Transparent Conductive Films for Flexible Electronics

Printed electronics are an important enabling technology for the development of low-cost, large-area, and flexible optoelectronic devices. Transparent conductive films (TCFs) made from solution-processable transparent conductive materials, such as metal nanoparticles/nanowires, carbon nanotubes, graphene, and conductive polymers, can simultaneously exhibit high mechanical flexibility, low cost, and better photoelectric properties compared to the commonly used sputtered indium-tin-oxide-based TCFs, and are thus receiving great attention. This Review summarizes recent advances of large-area flexible TCFs enabled by several roll-to-roll-compatible printed techniques including inkjet printing, screen printing, offset printing, and gravure printing using the emerging transparent conductive materials. The preparation of TCFs including ink formulation, substrate treatment, patterning, and postprocessing, and their potential applications in solar cells, organic light-emitting diodes, and touch panels are discussed in detail. The rational combination of a variety of printed techniques with emerging transparent conductive materials is believed to extend the opportunities for the development of printed electronics within the realm of flexible electronics and beyond.

Improved Performance by SiO2 Hollow Nanospheres for Silver Nanowire-Based Flexible Transparent Conductive Films

Flexible transparent conductive films (TCFs) have attracted tremendous interest thanks to the rapid development of portable/flexible/wearable electronics. TCFs on the basis of silver nanowires (AgNWs) with excellent performance are becoming an efficient alternative to replace the brittle transparent metal oxide. In this study, a promising method was developed by introducing SiO₂ hollow nanospheres (SiO₂-HNSs) into the film to significantly improve the performance of AgNW-based TCFs. Since SiO₂-HNSs have opposite charges to AgNWs, the strong attraction had promoted a uniform distribution of AgNWs and made the distance between AgNWs closer, which could decrease the contact resistance greatly. The introduction of SiO₂ layer remarkably enhanced the transmission of visible light and the conductivity. In addition, the TCFs constructed by AgNWs and SiO₂-HNSs showed much higher thermal stability and adhesive force than those by only AgNWs. As an example, the transmission of AgNW/SiO₂-HNS-coated poly(ethylene terephthalate) (PET) could increase about 14.3% in comparison to AgNW-coated PET. Typically, a AgNW/SiO₂-HNS-based TCF with a sheet resistance of about 33 Ω/sq and transmittance of about 98.0% (excluding substrate) could be obtained with excellent flexibility, adhesion, and thermal stability. At last some devices were fabricated.

Silver Nanowire Transparent Conductive Films with High Uniformity Fabricated via a Dynamic Heating Method

The uniformity of the sheet resistance of transparent conductive films is one of the most important quality factors for touch panel applications. However, the uniformity of silver nanowire transparent conductive films is far inferior to that of indium-doped tin oxide (ITO). Herein, we report a dynamic heating method using infrared light to achieve silver nanowire transparent conductive films with high uniformity. This method can overcome the coffee ring effect during the drying process and suppress the aggregation of silver nanowires in the film. A nonuniformity factor of the sheet resistance of the as-prepared silver nanowire transparent conductive films could be as low as 6.7% at an average sheet resistance of 35 Ω/sq and a light transmittance of 95% (at 550 nm), comparable to that of high-quality ITO film in the market. In addition, a mechanical study shows that the sheet resistance of the films has little change after 5000 bending cycles, and the film could be used in touch panels for human-machine interactive input. The highly uniform and mechanically stable silver nanowire transparent conductive films meet the requirement for many significant applications and could play a key role in the display market in a near future.

Flexible Transparent Films Based on Nanocomposite Networks of Polyaniline and Carbon Nanotubes for High-Performance Gas Sensing

A flexible, transparent, chemical gas sensor is assembled from a transparent conducting film of carbon nanotube (CNT) networks that are coated with hierarchically nanostructured polyaniline (PANI) nanorods. The nanocomposite film is synthesized by in-situ, chemical oxidative polymerization of aniline in a functional multiwalled CNT (FMWCNT) suspension and is simultaneously deposited onto a flexible polyethylene terephthalate (PET) substrate. An as-prepared flexible transparent chemical gas sensor exhibits excellent transparency of 85.0% at 550 nm using the PANI/FMWCNT nanocomposite film prepared over a reaction time of 8 h. The sensor also shows good flexibility, without any obvious decrease in performance after 500 bending/extending cycles, demonstrating high-performance, portable gas sensing at room temperature. This superior performance could be attributed to the improved electron transport and collection due to the CNTs, resulting in reliable and efficient sensing, as well as the high surface-to-volume ratio of the hierarchically nanostructured composites. The excellent transparency, improved sensing performance, and superior flexibility of the device, may enable the integration of this simple, low-cost, gas sensor into handheld flexible transparent electronic circuitry and optoelectronic devices.

Optical, electrical, and electromechanical properties of hybrid graphene/carbon nanotube films

By combining a graphene layer and aligned multiwalled carbon nanotube (MWNT) sheets in two different configurations, i) graphene on the top of MWNTs and ii) MWNTs on the top of the graphene, it is demonstrated that optical, electrical, and electromechanical properties of the resulting hybrid films depend on configurations.

Highly thermostable, flexible, transparent, and conductive films on polyimide substrate with an AZO/AgNW/AZO structure

Flexible transparent conductive films (TCFs) are used in a variety of optoelectronic devices. However, their use is limited due to poor thermostability. We report hybrid TCFs incorporation in both aluminum-doped zinc oxide (AZO) and silver nanowires (AgNWs). The layered AZO/AgNWs/AZO structure was deposited onto a transparent polyimide (PI) substrate and displayed excellent thermostability. When heated to 250 °C for 1 h, the change in resistivity (Rc) was less than 10% (Rc of pure AgNW film > 500) while retaining good photoelectric properties (Rsh = 8.6 Ohm/sq and T = 74.4%). Layering the AgNW network between AZO films decreased the surface roughness (Rrms < 8 nm) and enhances the mechanical flexibility of the hybrid films. The combination of these characteristics makes the hybrid film an excellent candidate for substrates of novel flexible optoelectronic devices which require high-temperature processing.

25th anniversary article: carbon nanotube- and graphene-based transparent conductive films for optoelectronic devices

Carbon nanotube (CNT)- and graphene (G)-based transparent conductive films (TCFs) are two promising alternatives for commonly-used indium tin oxide-based TCFs for future flexible optoelectronic devices. This review comprehensively summarizes recent progress in the fabrication, properties, modification, patterning, and integration of CNT- and G-TCFs into optoelectronic devices. Their potential applications and challenges in optoelectronic devices, such as organic photovoltaic cells, organic light emitting diodes and touch panels, are discussed in detail. More importantly, their key characteristics and advantages for use in these devices are compared. Despite many challenges, CNT- and G-TCFs have demonstrated great potential in various optoelectronic devices and have already been used for some products like touch panels of smartphones. This illustrates the significant opportunities for the industrial use of CNTs and graphene, and hence pushes nanoscience and nanotechnology one step towards practical applications.

"Quasi-freestanding" graphene-on-single walled carbon nanotube electrode for applications in organic light-emitting diode

An air-stable transparent conductive film with "quasi-freestanding" graphene supported on horizontal single walled carbon nanotubes (SWCNTs) arrays is fabricated. The sheet resistance of graphene films stacked via layer-by-layer transfer (LBL) on quartz, and modified by 1-Pyrenebutyric acid N-hydroxysuccinimide ester (PBASE), is reduced from 273 Ω/sq to about 76 Ω/sq. The electrical properties are stable to heat treatment (up to 200 ºC) and ambient exposure. Organic light-emitting diodes (OLEDs) constructed of this carbon anode (T ≈ 89.13% at 550 nm) exhibit ≈88% power efficiency of OLEDs fabricated on an ITO anode (low turn on voltage ≈3.1 eV, high luminance up to ≈29 490 cd/m(2) , current efficiency ≈14.7 cd/A). Most importantly, the entire graphene-on-SWCNT hybrid electrodes can be transferred onto plastic (PET) forming a highly-flexible OLED device, which continues to function without degradation in performance at bending angles >60°.

Radical-assisted chemical doping for chemically derived graphene

Carrier doping of graphene is one of the most challenging issues that needs to be solved to enable its use in various applications. We developed a carrier doping method using radical-assisted conjugated organic molecules in the liquid phase and demonstrated all-wet fabrication process of doped graphene films without any vacuum process. Charge transfer interaction between graphene and dopant molecules was directly investigated by spectroscopic studies. The resistivity of the doped graphene films was drastically decreased by two orders of magnitude. The resistivity was improved by not only carrier doping but the improvement in adhesion of doped graphene flakes. First-principles calculation supported the model of our doping mechanism.

Development of a simple method for fabrication of transparent conductive films with high mechanical strength

We have developed a simple method of fabricating transparent conductive films with a high mechanical strength on glass and indium tin oxide substrates. It does not require a large excess of organic solvents and polymerization catalysts and can yield smooth films by spin-coating of a mixture of a commercially available aqueous dispersion of poly(3,4-ethylenedioxythiophene)-poly(4-styrene sulfonate) and a neat liquid of tetraethyl orthosilicate. Preparation conditions such as feed ratio, kinds of additives, and annealing temperature and time were optimized to give highly conductive, transparent and mechanically strong films.