Silver Nanoparticle-Infused Cotton Fiber: Durability and Aqueous Release of Silver in Laundry Water

Although the application of silver nanoparticles to commercial antibacterial items is well-established, there have been increasing concerns that such particles might leach out, particularly into laundry water from textile products. A recently developed process wherein silver nanoparticles are synthesized in situ within the cotton fiber itself promises, however, to achieve the desired washing durability. In this study, the silver release behavior of the silver nanoparticle-infused cotton fabric during consecutive launderings in water and a detergent solution was analyzed. Silver nanoparticles (12 ± 3 nm in diameter) were uniformly produced throughout the entire volume of cotton fiber with a concentration of 3017 ± 56 mg/kg. A combination of colorimetric, spectroscopic, and elemental analyses showed (1) nonlinear silver release behavior, with a rapid release from externally formed nanoparticles during the initial washing and a plateau-like release from internally formed nanoparticles during extended washing, and (2) superior nanoparticle-leach resistance compared to those in commercial and laboratory-prepared textiles analyzed in the literature. The internal nanoparticles immobilized within cotton fiber exhibited persistent antibacterial activity after 50 home laundering cycles.

Pore-size and polymer affect the ability of filters for washing-machines to reduce domestic emissions of fibres to sewage

When clothes are worn and washed, they emit fibres into the ecosystem via discharges of sewage that have been linked to the global dispersion of clothing fibres. Facilities that treat sewage divert some fibres from sewage effluent to sludge, but no current methods of filtration eliminate their environmental release. While filters for washing-machines are sold to consumers with the argument they will reduce the emissions of fibres from clothes to the environment, there is insufficient scientific peer-reviewed evidence assessing their ability to retain fibres from washed clothes and reduce environmental contamination. To improve our understanding and develop more realistic methods to assess the efficiency of filters, we washed replicate cotton and polyester garments in replicate domestic front-loaded washing-machines with and without replicate filters (micro- and milli-meter-sized pores), and then quantified the masses of the fibres retained by the filters and those released in the effluent. Here we show micrometer-sized filters significantly reduced the mass of cotton by 67% (F_2,6 = 11.69, P<0.01) compared to effluent from appliances with no filters, whilst filters in general reduced polyester fibres in their effluent by more than 65% (micrometer-sized pores) and 74% (millimeter-sized pores) compared to effluent from appliances with no filters (F_2,12 = 5.20, P<0.05). While filters with micrometer-sized pores caught larger masses and total proportions of fibres than filters with millimeter-sized pores, the differences were only significant for the total proportions of cotton (t = 4.799 df = 4, P<0.01). For tests with garments of either types of polymer, the filtered effluent still contained up to a third of the original masses of fibres released from the garments. Given the diversity of clothes, polymers, appliances and filters currently sold to consumers, our work shows the value of increasing the rigour (e.g. more levels of replication) when testing filters and the need for further studies that test an even greater diversity of materials and methods in order to meet the growing demand for knowledge from governments, industry and the public.

Introducing ergonomics requirements in the eco-design of energy-related products from users' behaviour approach

Ergonomics has been a very important activity in the design process. However, ergonomics rarely includes the environmental requirements into the design of products. The article proposes and presents the Eco-Ergo model through its application to a real-world product, a washing machine, to allow designers and ergonomists to establish product design requirements in order to minimise environmental impacts related to user-product interaction during the use stage. This model uses a visual language of representation, Blueprinting-based, that helps designers explore problems they have not previously considered during the market research when a wide variety of products with different interaction elements is analysed. The application of this model allows direct efforts and attention on the user analysis phase in the most influential user's actions on the environmental performance of energy-related products during use, establishing ergonomics requirements related to users behaviour at the initial design phase. Practitioner summary: This study provides a proposal to incorporate ergonomics into the practice of eco-design through the use of human factors in the establishment of initial eco-design requirements. This blueprint-based model combines an empirical and theoretical approach, based on the product test developed by designers, ergonomists and environmentalists. Abbreviations: CO2: carbon dioxide; DBIM: design behaviour intervention model; DfSB: design for sustainable behaviour; DwI Method: design with intent method; LCA: life cycle assessment; LCD: liquid cristal display; MJ: megajoule; MTM: methods-time measurement; PSS: product-service system; RPM: revolutions per minute.

Release of polyester and cotton fibers from textiles in machine washings

Microplastics are widely spread in the environment, which along with still increasing production have aroused concern of their impacts on environmental health. The objective of this study is to quantify the number and mass of two most common textile fibers discharged from sequential machine washings to sewers. The number and mass of microfibers released from polyester and cotton textiles in the first wash varied in the range 2.1 × 10⁵ to 1.3 × 10⁷ and 0.12 to 0.33% w/w, respectively. Amounts of released microfibers showed a decreasing trend in sequential washes. The annual emission of polyester and cotton microfibers from household washing machines was estimated to be 154,000 (1.0 × 10¹⁴) and 411,000 kg (4.9 × 10¹⁴) in Finland (population 5.5 × 10⁶). Due to the high emission values and sorption capacities, the polyester and cotton microfibers may play an important role in the transport and fate of chemical pollutants in the aquatic environment.

Release of synthetic microplastic plastic fibres from domestic washing machines: Effects of fabric type and washing conditions

Washing clothes made from synthetic materials has been identified as a potentially important source of microscopic fibres to the environment. This study examined the release of fibres from polyester, polyester-cotton blend and acrylic fabrics. These fabrics were laundered under various conditions of temperature, detergent and conditioner. Fibres from waste effluent were examined and the mass, abundance and fibre size compared between treatments. Average fibre size ranged between 11.9 and 17.7μm in diameter, and 5.0 and 7.8mm in length. Polyester-cotton fabric consistently shed significantly fewer fibres than either polyester or acrylic. However, fibre release varied according to wash treatment with various complex interactions. We estimate over 700,000 fibres could be released from an average 6kg wash load of acrylic fabric. As fibres have been reported in effluent from sewage treatment plants, our data indicates fibres released by washing of clothing could be an important source of microplastics to aquatic habitats.

Financial and environmental modelling of water hardness--implications for utilising harvested rainwater in washing machines

A study was conducted to determine the financial and environmental effects of water quality on rainwater harvesting systems. The potential for replacing tap water used in washing machines with rainwater was studied, and then analysis presented in this paper is valid for applications that include washing machines where tap water hardness may be important. A wide range of weather conditions, such as rainfall (284-1,794 mm/year); water hardness (14-315 mg/L CaCO3); tap water prices (0.85-2.65 Euros/m(3)) in different Spanish urban areas (from individual buildings to whole neighbourhoods); and other scenarios (including materials and water storage capacity) were analysed. Rainfall was essential for rainwater harvesting, but the tap water prices and the water hardness were the main factors for consideration in the financial and the environmental analyses, respectively. The local tap water hardness and prices can cause greater financial and environmental impacts than the type of material used for the water storage tank or the volume of the tank. The use of rainwater as a substitute for hard water in washing machines favours financial analysis. Although tap water hardness significantly affects the financial analysis, the greatest effect was found in the environmental analysis. When hard tap water needed to be replaced, it was found that a water price of 1 Euro/m(3) could render the use of rainwater financially feasible when using large-scale rainwater harvesting systems. When the water hardness was greater than 300 mg/L CaCO3, a financial analysis revealed that an net present value greater than 270 Euros/dwelling could be obtained at the neighbourhood scale, and there could be a reduction in the Global Warming Potential (100 years) ranging between 35 and 101 kg CO2 eq./dwelling/year.

Maximum allowable values of the heavy metals in recycled water for household laundry

Household laundry as a new end use of recycled water in dual reticulation systems has a great potential as the significant amount of potable water from urban households can be saved. However, there is still no sufficient evidence and supporting recycled water quality guidelines for this particular use. A key gap in knowledge is the impact of heavy metals in recycled water on clothes and washing machines. Thus, this study aims to determine the maximum allowable values (MAVs) of the heavy metals iron (Fe), lead (Pb), zinc (Zn), copper (Cu), and manganese (Mn) in recycled water for washing clothes in washing machines. Six different concentrations of each targeted metals were prepared in tap water for the washing machine experiments. The tearing/tensile strength tests were used for the assessment of cloth durability. MINITAB 16 as a statistical tool was used and ANOVA one way test was applied for the significance analysis (Turkey's test p<0.05). The results show that the MAVs of the heavy metals Fe, Pb, Zn, Cu and Mn were found to be 1 mg/l, 1 mg/l, 10 mg/l, 5 mg/l and 1 mg/l respectively in terms of cloth durability.

Multi-criteria analysis towards the new end use of recycled water for household laundry: a case study in Sydney

This paper aims to put forward several management alternatives regarding the application of recycled water for household laundry in Sydney. Based on different recycled water treatment techniques such as microfiltration (MF), granular activated carbon (GAC) or reverse osmosis (RO), and types of washing machines (WMs), five alternatives were proposed as follows: (1) do nothing scenario; (2) MF+existing WMs; (3) MF+new WMs; (4) MF-GAC+existing WMs; and (5) MF-RO+existing WMs. Accordingly, a comprehensive quantitative assessment on the trade-off among a variety of issues (e.g., engineering feasibility, initial cost, energy consumption, supply flexibility and water savings) was performed over the alternatives. This was achieved by a computer-based multi-criteria analysis (MCA) using the rank order weight generation together with preference ranking organization method for enrichment evaluation (PROMETHEE) outranking techniques. Particularly, the generated 10,000 combinations of weights via Monte Carlo simulation were able to significantly reduce the man-made errors of single fixed set of weights because of its objectivity and high efficiency. To illustrate the methodology, a case study on Rouse Hill Development Area (RHDA), Sydney, Australia was carried out afterwards. The study was concluded by highlighting the feasibility of using highly treated recycled water for existing and new washing machines. This could provide a powerful guidance for sustainable water reuse management in the long term. However, more detailed field trials and investigations are still needed to effectively understand, predict and manage the impact of selected recycled water for new end use alternatives.

Washing when the sun is shining! How users interact with a household energy management system

To make optimal use of sustainable energy, domestic electricity consumption should shift to match local supply conditions. Energy management systems (EMS) are a new sustainable technology that can help to disrupt consumers' habits concerning electricity consumption, whilst reinforcing desired behaviours. This research examined the factors that influence the likelihood that people will shift their electricity consumption to match sustainable supply. Twenty-one interviews were conducted with households who had used the EMS 'Smart Wash' for several months. The findings showed that the likelihood of behaviour change is influenced by a combination of the user's motivation, specific contextual factors and the design of the EMS. Based on these results, several recommendations are given for the future design of EMSs.

PRACTITIONER SUMMARY

Energy management systems (EMS) are a new technology that encourages people to shift electricity consumption to match local solar supply. Interviews among users of an EMS showed that the likelihood of behaviour change is influenced by the combination of the user's motivation, contextual factors and the EMS design.

Ultrasonic system for continuous washing of textiles in liquid layers

The use of ultrasonic energy for washing of textiles has been tried several times without achieving practical development. In fact, the softness of the fibres makes the cavitation to produce small erosion effect and the reticulate structure of the fabric favours the formation of air bubble layers which obstruct wave penetration. In addition, a high proportion of water with respect to the wash load and a certain water degassing is required to assure efficiency and homogeneity in the wash performance. Such requirements have hindered the commercial development of the ultrasonic washing machines for domestic purposes. For specific industrial applications, a great part of these limitations may be overcome. This article deals with a new process in which the fabric is exposed to the ultrasonic field in a flat format. Such process has been implemented at laboratory and at semi-industrial stage by using specially designed power ultrasonic transducers with rectangular plate radiators. The cleaning effect is produced by the intense cavitation field generated by the plate radiator within a thin layer of liquid where the fabric is introduced. The homogeneity of such effect is achieved by the successive exposure of all the fabric areas to the intense acoustic field. In this paper the structure and performance of the developed system are shown.

Laundering of hospital staff uniforms at home

Few hospitals now launder staff uniforms. Staff are expected to use their own domestic machines, most of which run with 40 degrees C cycles. However, there is little information on the effectiveness of home laundering. This study demonstrates that domestic washing machines reduce viable counts of Staphylococcus aureus to below detectable levels from an inoculum of 10(8)-10(12) colony-forming units (>or=10(6)-fold reduction), even using low temperature (40 degrees C) programmes. Environmental organisms, predominantly Gram-negative flora, were introduced from the machine itself but were destroyed by tumble drying or ironing. Domestic laundering of uniforms is an acceptable alternative to hospital laundering if combined with tumble drying or ironing.

Washing machine related injuries in children: a continuing threat

OBJECTIVE

To describe washing machine related injuries in children in the United States.

METHODS

Injury data for 496 washing machine related injuries documented by the Consumer Product Safety Commission's National Electronic Injury Surveillance System and death certificate data files were analyzed. Gender, age, diagnosis, body part injured, disposition, location and mechanism of injury were considered in the analysis of data.

RESULTS

The upper extremities were most frequently injured in washing machine related injuries, especially with wringer machines. Fewer than 10% of patients required admission, but automatic washers accounted for most of these and for both of the deaths. Automatic washer injuries involved a wider range of injury mechanism, including 23 children who fell from the machines while in baby seats.

CONCLUSIONS

Though most injuries associated with washing machines are minor, some are severe and devastating. Many of the injuries could be avoided with improvements in machine design while others suggest a need for increased education of potential dangers and better supervision of children if they are allowed access to areas where washing machines are operating. Furthermore, washing machines should only be used for their intended purpose. Given the limitations of educational efforts to prevent injuries, health professionals should have a major role in public education regarding these seemingly benign household appliances.

Effects of retrofit emission controls and work practices on perchloroethylene exposures in small dry-cleaning shops

The effectiveness of commercially available interventions for reducing workers' perchloroethylene exposures in three small dry-cleaning shops was evaluated. Depending upon machine configuration, the intervention consisted of the addition of either a refrigerated condenser or a closed-loop carbon adsorber to the existing dry-cleaning machine. These relatively inexpensive (less than $5000) engineering controls were designed to reduce perchloroethylene emissions when dry-cleaning machine doors were opened for loading or unloading. Effectiveness of the interventions was judged by comparing pre- and postintervention perchloroethylene exposures using three types of measurements in each shop: (1) full-shift, personal breathing zone, air monitoring, (2) next-morning, end-exhaled worker breath concentrations of perchloroethylene, and (3) differences in the end-exhaled breath perchloroethylene concentrations before and after opening the dry-cleaning machine door. In general, measurements supported the hypothesis that machine operators' exposures to perchloroethylene can be reduced. However, work practices, especially maintenance practices, influenced exposures more than was originally anticipated. Only owners of dry-cleaning machines in good repair, with few leaks, should consider retrofitting them, and only after consultation with their machine's manufacturer. If machines are in poor condition, a new machine or alternative technology should be considered. Shop owners and employees should never circumvent safety features on dry-cleaning machines.

An evaluation of retrofit engineering control interventions to reduce perchloroethylene exposures in commercial dry-cleaning shops

Real-time monitoring was used to evaluate the ability of engineering control devices retrofitted on two existing dry-cleaning machines to reduce worker exposures to perchloroethylene. In one dry-cleaning shop, a refrigerated condenser was installed on a machine that had a water-cooled condenser to reduce the air temperature, improve vapor recovery, and lower exposures. In a second shop, a carbon adsorber was retrofitted on a machine to adsorb residual perchloroethylene not collected by the existing refrigerated condenser to improve vapor recovery and reduce exposures. Both controls were successful at reducing the perchloroethylene exposures of the dry-cleaning machine operator. Real-time monitoring was performed to evaluate how the engineering controls affected exposures during loading and unloading the dry-cleaning machine, a task generally considered to account for the highest exposures. The real-time monitoring showed that dramatic reductions occurred in exposures during loading and unloading of the dry-cleaning machine due to the engineering controls. Peak operator exposures during loading and unloading were reduced by 60 percent in the shop that had a refrigerated condenser installed on the dry-cleaning machine and 92 percent in the shop that had a carbon adsorber installed. Although loading and unloading exposures were dramatically reduced, drops in full-shift time-weighted average (TWA) exposures were less dramatic. TWA exposures to perchloroethylene, as measured by conventional air sampling, showed smaller reductions in operator exposures of 28 percent or less. Differences between exposure results from real-time and conventional air sampling very likely resulted from other uncontrolled sources of exposure, differences in shop general ventilation before and after the control was installed, relatively small sample sizes, and experimental variability inherent in field research. Although there were some difficulties and complications with installation and maintenance of the engineering controls, this study showed that retrofitting engineering controls may be a feasible option for some dry-cleaning shop owners to reduce worker exposures to perchloroethylene. By installing retrofit controls, a dry-cleaning facility can reduce exposures, in some cases dramatically, and bring operators into compliance with the Occupational Safety and Health Administration (OSHA) peak exposure limit of 300 ppm. Retrofit engineering controls are also likely to enable many dry-cleaning workers to lower their overall personal TWA exposures to perchloroethylene.

Washing machine usage in remote aboriginal communities

The use of washing machines was investigated in two remote Aboriginal communities in the Anangu Pitjantjatjara homelands. The aim was to look both at machine reliability and to investigate the health aspect of washing clothes. A total of 39 machines were inspected for wear and component reliability every three months over a one-year period. Of these, 10 machines were monitored in detail for water consumption, hours of use and cycles of operation. The machines monitored were Speed Queen model EA2011 (7 kg washing load) commercial units. The field survey results suggested a high rate of operation of the machines with an average of around 1,100 washing cycles per year (range 150 and 2,300 cycles per year). The results were compared with available figures for the average Australian household. A literature survey, to ascertain the health outcomes relating to washing clothes and bedding, confirmed that washing machines are efficient at removal of bacteria from clothes and bedding but suggested that recontamination of clothing after washing often negated the prior removal. High temperature washing (> 60 degrees C) appeared to be advantageous from a health perspective. With regards to larger organisms, while dust mites and body lice transmission between people would probably be decreased by washing clothes, scabies appeared to be mainly transmitted by body contact and thus transmission would be only marginally decreased by the use of washing machines.

Roundup: extractors. Eight manufacturers of extractors provide details about their systems

Choosing an extractor for a specific set of plant conditions can be complicated and costly, if you make the wrong purchasing decision. Extractors come in two types: centrifugal and compression, but there are numerous models of each. Here, eight manufacturers of extractors provide details about their systems.

American Laundry Digest distributors directory

A state by state listing of companies that distribute laundry equipment (E), supplies (S), or other goods and services (O).

Wastewater treatment systems

Textile rental operators face tough wastewater cleanup challenges in many communities nationwide. Depending on the local POTW regulations and the textile rental company's customer base, wastewater pretreatment isn't always necessary. However, many plants must pretreat or risk being put out of business. In this article, eight manufacturers of wastewater treatment equipment explain their systems to help industry operators comply with POTW limits.

Case study:-calender covers in a hospital laundry. Energy Efficiency Office, Department of Energy

Whipps Cross Hospital laundry is typical of many laundries, both in the commercial sector and NHS, in that it uses old calenders which are substantially less efficient than more modern machines. Although calendering is a relatively efficient method of moisture removal, the quantity of flatwork processed by this laundry means that the calendering section uses a significant proportion of the total laundry energy consumption. In common with many other laundries, the four calenders were producing a great deal of airborne lint which required expensive cleaning at regular intervals, and made the working environment uncomfortable, reducing the performance and morale of the operators. In an effort to improve this situation, covers were fitted to all the calenders in early 1989. These were claimed to improve energy efficiency by reducing the heat losses from the calender's upper surfaces and to improve the local atmosphere by reducing the quantity of lint and moist air escaping into the laundry. This case study examines the savings (both energy savings and others) achieved by the installation of the covers, and assesses any drawbacks which may have become apparent after extended use.

High-tech equipment--present and future options for rental operators

U.S. and European laundry equipment manufacturers are striving to gain efficiencies with high technology. They are well aware that operators want to use resources--including energy, water, labor, and merchandise--better. Also, meaningful information about plant operations is becoming a top priority. Many high-tech options are available now and others are in the works to carry this industry into the next century.

Tunnel washing from the user's viewpoint

It's become a matter of fact. Whenever a launderer is considering some sort of production upgrade, the tunnel washer is one of the options that is investigated. Everyone is aware of the basic concept of tunnel washing, but all of the units that are marketed in the U.S. have some engineering differences that make them unique. To decide which unit is best for your laundry, it is necessary to do some extensive research. This means talking to manufacturers, knowledgeable chemical suppliers, and other launderers who have already taken the plunge. During the past few years, the DIGEST has asked manufacturers to comment on various aspects of tunnel washing. This year, however, we have decided to get the inside story from operators who have installed these units in their plants. We also have some input from chemical suppliers who are experienced in developing formulas for tunnels.

American Laundry Digest Buyer's Guide. Manufacturers directory

The following is the annual American Laundry Digest Buyer's Guide which is being circulated to all segments of the laundry industry. The Guide contains a list of manufacturers who responded to our questionnaire. This is followed by a list of product categories and the various manufacturers who make these products. You may contact these companies directly or by using the reader service card in this issue.