Versatility of biological non-heme Fe(II) centers in oxygen activation reactions

Oxidase and oxygenase enzymes allow the use of relatively unreactive O2 in biochemical reactions. Many of the mechanistic strategies used in nature for this key reaction are represented within the 2-histidine-1-carboxylate facial triad family of non-heme Fe(II)-containing enzymes. The open face of the metal coordination sphere opposite the three endogenous ligands participates directly in the reaction chemistry. Here, data from several studies are presented showing that reductive O2 activation within this family is initiated by substrate (and in some cases cosubstrate or cofactor) binding, which then allows coordination of O2 to the metal. From this starting point, the O2 activation process and the reactions with substrates diverge broadly. The reactive species formed in these reactions have been proposed to encompass four oxidation states of iron and all forms of reduced O2 as well as several of the reactive oxygen species that derive from O-O bond cleavage.

Near-IR MCD of the nonheme ferrous active site in naphthalene 1,2-dioxygenase: correlation to crystallography and structural insight into the mechanism of Rieske dioxygenases

Near-IR MCD and variable temperature, variable field (VTVH) MCD have been applied to naphthalene 1,2-dioxygenase (NDO) to describe the coordination geometry and electronic structure of the mononuclear nonheme ferrous catalytic site in the resting and substrate-bound forms with the Rieske 2Fe2S cluster oxidized and reduced. The structural results are correlated with the crystallographic studies of NDO and other related Rieske nonheme iron oxygenases to develop molecular level insights into the structure/function correlation for this class of enzymes. The MCD data for resting NDO with the Rieske center oxidized indicate the presence of a six-coordinate high-spin ferrous site with a weak axial ligand which becomes more tightly coordinated when the Rieske center is reduced. Binding of naphthalene to resting NDO (Rieske oxidized and reduced) converts the six-coordinate sites into five-coordinate (5c) sites with elimination of a water ligand. In the Rieske oxidized form the 5c sites are square pyramidal but transform to a 1:2 mixture of trigonal bipyramial/square pyramidal sites when the Rieske center is reduced. Thus the geometric and electronic structure of the catalytic site in the presence of substrate can be significantly affected by the redox state of the Rieske center. The catalytic ferrous site is primed for the O2 reaction when substrate is bound in the active site in the presence of the reduced Rieske site. These structural changes ensure that two electrons and the substrate are present before the binding and activation of O2, which avoids the uncontrolled formation and release of reactive oxygen species.

Determination of the substrate binding mode to the active site iron of (S)-2-hydroxypropylphosphonic acid epoxidase using 17O-enriched substrates and substrate analogues

(S)-2-Hydroxypropylphosphonic acid epoxidase (HppE) is an O2-dependent, nonheme Fe(II)-containing oxidase that converts (S)-2-hydroxypropylphosphonic acid ((S)-HPP) to the regio- and enantiomerically specific epoxide, fosfomycin. Use of (R)-2-hydroxypropylphosphonic acid ((R)-HPP) yields the 2-keto-adduct rather than the epoxide. Here we report the chemical synthesis of a range of HPP analogues designed to probe the basis for this specificity. In past studies, NO has been used as an O2 surrogate to provide an EPR probe of the Fe(II) environment. These studies suggest that O2 binds to the iron, and substrates bind in a single orientation that strongly perturbs the iron environment. Recently, the X-ray crystal structure showed direct binding of the substrate to the iron, but both monodentate (via the phosphonate) and chelated (via the hydroxyl and phosphonate) orientations were observed. In the current study, hyperfine broadening of the homogeneous S = 3/2 EPR spectrum of the HppE-NO-HPP complex was observed when either the hydroxyl or the phosphonate group of HPP was enriched with 17O (I = 5/2). These results indicate that both functional groups of HPP bind to Fe(II) ion at the same time as NO, suggesting that the chelated substrate binding mode dominates in solution. (R)- and (S)-analogue compounds that maintained the core structure of HPP but added bulky terminal groups were turned over to give products analogous to those from (R)- and (S)-HPP, respectively. In contrast, substrate analogues lacking either the phosphonate or hydroxyl group were not turned over. Elongation of the carbon chain between the hydroxyl and phosphonate allowed binding to the iron in a variety of orientations to give keto and diol products at positions determined by the hydroxyl substituent, but no stable epoxide was formed. These studies show the importance of the Fe(II)-substrate chelate structure to active antibiotic formation. This fixed orientation may align the substrate next to the iron-bound activated oxygen species thought to mediate hydrogen atom abstraction from the nearest substrate carbon.

Two-pronged survival strategy for the major cystic fibrosis pathogen, Pseudomonas aeruginosa, lacking the capacity to degrade nitric oxide during anaerobic respiration

Protection from NO gas, a toxic byproduct of anaerobic respiration in Pseudomonas aeruginosa, is mediated by nitric oxide (NO) reductase (NOR), the norCB gene product. Nevertheless, a norCB mutant that accumulated approximately 13.6 microM NO paradoxically survived anaerobic growth. Transcription of genes encoding nitrate and nitrite reductases, the enzymes responsible for NO production, was reduced >50- and 2.5-fold in the norCB mutant. This was due, in part, to a predicted compromise of the [4Fe-4S](2+) cluster in the anaerobic regulator ANR by physiological NO levels, resulting in an inability to bind to its cognate promoter DNA sequences. Remarkably, two O(2)-dependent dioxygenases, homogentisate-1,2-dioxygenase (HmgA) and 4-hydroxyphenylpyruvate dioxygenase (Hpd), were derepressed in the norCB mutant. Electron paramagnetic resonance studies showed that HmgA and Hpd bound NO avidly, and helped protect the norCB mutant in anaerobic biofilms. These data suggest that protection of a P. aeruginosa norCB mutant against anaerobic NO toxicity occurs by both control of NO supply and reassignment of metabolic enzymes to the task of NO sequestration.

Hydrogen peroxide dependent cis-dihydroxylation of benzoate by fully oxidized benzoate 1,2-dioxygenase

Rieske dioxygenases catalyze the reductive activation of O2 for the formation of cis-dihydrodiols from unactivated aromatic compounds. It is known that O2 is activated at a mononuclear non-heme iron site utilizing electrons supplied by a nearby Rieske iron sulfur cluster. However, it is controversial whether the reactive species is an Fe(III)-(hydro)peroxo or an Fe(II)-(hydro)peroxo (or electronically equivalent species formed by breaking the O-O bond). Here it is shown that benzoate 1,2 dioxygenase oxygenase component (BZDO) prepared in a form with the Rieske cluster oxidized and the mononuclear iron in the Fe(III) state can utilize H2O2 as a source of reduced oxygen to form the correct cis-dihydrodiol product from benzoate. The reaction approaches stoichiometric yield relative to the mononuclear Fe(III) concentration, being limited to a single turnover by inefficient product release from the Fe(III)-product complex. EPR and Mössbauer studies show that the iron remains ferric throughout this single turnover "peroxide shunt" reaction. These results strongly support Fe(III)-(hydro)peroxo (or Fe(V)-oxo-hydroxo) as the reactive species because there is no source of additional reducing equivalents to form the Fe(II)-(hydro)peroxo state. This conclusion could be further tested in the case of BZDO because the peroxide shunt occurs very slowly compared with normal turnover, allowing the reactive intermediate to be trapped for spectroscopic analysis. We attribute the slow reaction rate to a forced change in the normally strict order of the substrate binding and enzyme reduction steps that regulate the catalytic cycle. The reactive intermediate is a high-spin ferric species exhibiting an unusual negative zero field splitting and other EPR and Mössbauer spectroscopic properties reminiscent of previously characterized side-on-bound peroxide adducts of Fe(III) model complexes. If the species in BZDO is a similar adduct, its isomer shift is most consistent with an Fe(III)-hydroperoxo reactive state.

VTVH-MCD and DFT studies of thiolate bonding to [FeNO]7/[FeO2]8 complexes of isopenicillin N synthase: substrate determination of oxidase versus oxygenase activity in nonheme Fe enzymes

Isopenicillin N synthase (IPNS) is a unique mononuclear nonheme Fe enzyme that catalyzes the four-electron oxidative double ring closure of its substrate ACV. A combination of spectroscopic techniques including EPR, absorbance, circular dichroism (CD), magnetic CD, and variable-temperature, variable-field MCD (VTVH-MCD) were used to evaluate the geometric and electronic structure of the [FeNO]7 complex of IPNS coordinated with the ACV thiolate ligand. Density Function Theory (DFT) calculations correlated to the spectroscopic data were used to generate an experimentally calibrated bonding description of the Fe-IPNS-ACV-NO complex. New spectroscopic features introduced by the binding of the ACV thiolate at 13 100 and 19 800 cm-1 are assigned as the NO pi*(ip) --> Fe dx2-y2 and S pi--> Fe dx2-y2 charge transfer (CT) transitions, respectively. Configuration interaction mixes S CT character into the NO pi*(ip) --> Fe dx2-y2 CT transition, which is observed experimentally from the VTVH-MCD data from this transition. Calculations on the hypothetical {FeO2}8 complex of Fe-IPNS-ACV reveal that the configuration interaction present in the [FeNO]7 complex results in an unoccupied frontier molecular orbital (FMO) with correct orientation and distal O character for H-atom abstraction from the ACV substrate. The energetics of NO/O2 binding to Fe-IPNS-ACV were evaluated and demonstrate that charge donation from the ACV thiolate ligand renders the formation of the FeIII-superoxide complex energetically favorable, driving the reaction at the Fe center. This single center reaction allows IPNS to avoid the O2 bridged binding generally invoked in other nonheme Fe enzymes that leads to oxygen insertion (i.e., oxygenase function) and determines the oxidase activity of IPNS.

Crystal structures of Fe2+ dioxygenase superoxo, alkylperoxo, and bound product intermediates

We report the structures of three intermediates in the O2 activation and insertion reactions of an extradiol ring-cleaving dioxygenase. A crystal of Fe2+-containing homoprotocatechuate 2,3-dioxygenase was soaked in the slow substrate 4-nitrocatechol in a low O2 atmosphere. The x-ray crystal structure shows that three different intermediates reside in different subunits of a single homotetrameric enzyme molecule. One of these is the key substrate-alkylperoxo-Fe2+ intermediate, which has been predicted, but not structurally characterized, in an oxygenase. The intermediates define the major chemical steps of the dioxygenase mechanism and point to a general mechanistic strategy for the diverse 2-His-1-carboxylate enzyme family.

Spectroscopic and electronic structure study of the enzyme-substrate complex of intradiol dioxygenases: substrate activation by a high-spin ferric non-heme iron site

Various mechanisms have been proposed for the initial O(2) attack in intradiol dioxygenases based on different electronic descriptions of the enzyme-substrate (ES) complex. We have examined the geometric and electronic structure of the high-spin ferric ES complex of protocatechuate 3,4-dioxygenase (3,4-PCD) with UV/visible absorption, circular dichroism (CD), magnetic CD (MCD), and variable-temperature variable-field (VTVH) MCD spectroscopies. The experimental data were coupled with DFT and INDO/S-CI calculations, and an experimentally calibrated bonding description was obtained. The broad absorption spectrum for the ES complex in the 6000-31000 cm(-1) region was resolved into at least five individual transitions, assigned as ligand-to-metal charge transfer (LMCT) from the protocatechuate (PCA) substrate and Tyr408. From our DFT calculations, all five LMCT transitions originate from the PCA and Tyr piop orbitals to the ferric dpi orbitals. The strong pi covalent donor interactions dominate the bonding in the ES complex. Using hypothetical Ga(3+)-catecholate/semiquinone complexes as references, 3,4-PCD-PCA was found to be best described as a highly covalent Fe(3+)-catecholate complex. The covalency is distributed unevenly among the four PCA valence orbitals, with the strongest interaction between the piop-sym and Fe dxz orbitals. This strong pi interaction, as reflected in the lowest energy PCA-to-Fe(3+) LMCT transition, is responsible for substrate activation for the O(2) reaction of intradiol dioxygenases. This involves a multi-electron-transfer (one beta and two alpha) mechanism, with Fe3+ acting as a buffer for the spin-forbidden two-electron redox process between PCA and O(2) in the formation of the peroxy-bridged ESO2 intermediate. The Fe ligand field overcomes the spin-forbidden nature of the triplet O(2) reaction, which potentially results in an intermediate spin state (S = 3/2) on the Fe(3+) center which is stabilized by a change in coordination along the reaction coordinate.

Role of the C-terminal region of the B component of Methylosinus trichosporium OB3b methane monooxygenase in the regulation of oxygen activation

The effects of the C-terminal region of the B component (MMOB) of soluble methane monooxygenase (sMMO) from Methylosinus trichosporium OB3b on steady-state turnover, the transient kinetics of the reaction cycle, and the properties of the sMMO hydroxylase (MMOH) active site diiron cluster have been explored. MMOB is known to have many profound effects on the rate and specificity of sMMO. Past studies have revealed specific roles for the well-folded core structure of MMOB as well as the disordered N-terminal region. Here, it is shown that the disordered C-terminal region of MMOB also performs critical roles in the regulation of catalysis. Deletion mutants of MMOB missing 5, 8, and 13 C-terminal residues cause progressive decreases in the maximum steady-state turnover number, as well as lower apparent rate constants for formation of the key reaction cycle intermediate, compound Q. It is shown that this latter effect is actually due to a decrease in the rate constant for formation of an earlier intermediate, probably the hydroperoxo species, compound P. Moreover, the deletions result in substantial uncoupling at or before the P intermediate. It is proposed that this is due to competition between slow H(2)O(2) release from one of the intermediates and the reaction that carries this intermediate on to the next step in the cycle, which is slowed by the mutation. Electron paramagnetic resonance (EPR) studies of the hydroxylase component (MMOH) in the mixed valent state suggest that complexation with the mutant MMOBs alters the electronic properties of the diiron cluster in a manner distinct from that observed when wild-type MMOB is used. Active site structural changes are also suggested by a substantial decrease in the deuterium kinetic isotope effect for the reaction of Q with methane thought to be associated with a decrease in quantum tunneling in the C-H bond breaking reaction. Thus, the surface interactions between MMOH and MMOB that affect substrate oxidation and its regulation appear to require the complete MMOB C-terminal region for proper function.

Regulation of methane monooxygenase catalysis based on size exclusion and quantum tunneling

The hydroxylase component (MMOH) of the soluble form of methane monooxygenase (sMMO) isolated from Methylosinus trichosporium OB3b catalyzes both the O2 activation and the CH4 oxidation reactions at the oxygen-bridged dinuclear iron cluster present in its buried active site. During the reaction cycle, the diiron cluster forms a bis-mu-oxo-(Fe(IV))2 intermediate termed compound Q (Q) that reacts directly with methane. Many adventitious substrates also react with Q, most at a relatively slow rate. We have proposed that Q reacts preferentially with CH4 because the sMMO regulatory component MMOB induces a size selective pore into the MMOH active site as the two components form a complex. Support for this proposal has come through the observation of a nonlinear Arrhenius plot for the CH4 oxidation, presumably due to a shift in rate-limiting step from substrate binding at low temperature to C-H bond cleavage at high temperature. Reactions of all substrates other than CH4 fail to exhibit a break in the Arrhenius plot because binding is always rate limiting in the temperature range explored. Here we show that it is possible to induce a break in the Arrhenius plot for the ethane reaction with Q by using an MMOB mutant termed DBL2 (S109A/T111A) in which residues at the MMOH-MMOB interface are reduced in size. We hypothesize that this increases the ethane binding rate and shifts the Arrhenius breakpoint into the observable temperature range. As a result of this shift, the kinetic and activation parameters of the C-H bond breaking reaction for both methane and ethane can be observed using the DBL2 mutant. A 2H-KIE is observed for both substrate oxidation reactions when using DBL2, whereas only CH4 oxidation exhibits an effect when using wild type MMOB, consistent with the C-H bond cleaving reaction becoming at least partially rate limiting for ethane. Analysis of the temperature dependence of the 2H-KIE for ethane and methane for reactions using both mutant and wild type forms of MMOB suggests that quantum tunneling plays a significant role in methane oxidation but not ethane oxidation.

Methane monooxygenase hydroxylase and B component interactions

The interaction of the soluble methane monooxygenase regulatory component (MMOB) and the active site-bearing hydroxylase component (MMOH) is investigated using spin and fluorescent probes. MMOB from Methylosinus trichosporium OB3b is devoid of cysteine. Consequently, site-directed mutagenesis was used to incorporate single cysteine residues, allowing specific placement of the probe molecules. Sixteen MMOB Cys mutants were prepared and labeled with the EPR spin probe 4-maleimido-2,2,6,6-tetramethyl-1-piperidinyloxy (MSL). Spectral evaluation of probe mobility and accessibility to the hydrophilic spin-relaxing agent NiEDDA showed that both properties decrease dramatically for a subset of the spin labels as the complex with MMOH forms, thereby defining the likely interaction surface on MMOB. This surface contains MMOB residue T111 thought to play a role in substrate access into the MMOH active site. The surface also contains several hydrophilic residues and is ringed by charged residues. The surface of MMOB opposite the proposed binding surface is highly charged, consistent with solvent exposure. Probes of both of the disordered N- and C-terminal regions remain highly mobile and exposed to solvent in the MMOH complex. Spin-labeling studies show that residue A62 of MMOB is located in a position where it can be used to monitor MMOH-MMOB complex formation without perturbing the process. Accordingly, steady-state kinetic assays show that it can be changed to Cys (A62C) and labeled with the fluorescent probes 6-bromoacetyl-2-dimethylaminonaphthalene (BADAN) or 5-((((2-iodoacetyl)amino)ethyl)amino)naphthalene-1-sulfonic acid (1,5-IAEDANS) without loss of the ability of MMOB to promote turnover. The BADAN fluorescence is partially quenched and red shifted as the complex with MMOH forms, allowing affinity measurements. It is shown that the high affinity of labeled MMOB (K(D) = 13.5 nM at pH 6.6, 25 degrees C) for the oxidized MMOH decreases substantially with increasing pH and increasing ionic strength but is nearly unaffected by addition of nonionic detergents. Similarly, the fluorescence anisotropy of the 1,5-IAEDANS-labeled A62C-MMOH complex is perturbed by salts but not nonionic detergents. This suggests that the MMOB-MMOH complex is stabilized by electrostatic interactions consistent with the characteristics of the proposed binding surface. Reduction of MMOH results in a 2-3 order of magnitude decrease in the affinity of the BADAN-labeled A62C-MMOB-MMOH complex, consistent with previous indications of structural change associated with reduction of the active site dinuclear iron cluster. Utilizing BADAN-labeled MMOB, the association and dissociation rate constants for the MMOB-MMOH binding reaction were determined and found to be consistent with a two-step process, possibly involving rapid association followed by a slower conformational change. The latter may be related to the regulation of substrate access into the active site of MMOH.

Spectroscopic studies of the anaerobic enzyme-substrate complex of catechol 1,2-dioxygenase

The basis of the respective regiospecificities of intradiol and extradiol dioxygenase is poorly understood and may be linked to the protonation state of the bidentate-bound catechol in the enzyme/substrate complex. Previous ultraviolet resonance Raman (UVRR) and UV-visible (UV-vis) difference spectroscopic studies demonstrated that, in extradiol dioxygenases, the catechol is bound to the Fe(II) as a monoanion. In this study, we use the same approaches to demonstrate that, in catechol 1,2-dioxygenase (C12O), an intradiol enzyme, the catechol binds to the Fe(III) as a dianion. Specifically, features at 290 nm and 1550 cm(-1) in the UV-vis and UVRR difference spectra, respectively, are assigned to dianionic catechol based on spectra of the model compound, ferric tris(catecholate). The UVRR spectroscopic band assignments are corroborated by density functional theory (DFT) calculations. In addition, negative features at 240 nm in UV-vis difference spectra and at 1600, 1210, and 1175 cm(-1) in UVRR difference spectra match those of a tyrosinate model compound, consistent with protonation of the axial tyrosinate ligand when it is displaced from the ferric ion coordination sphere upon substrate binding. The DFT calculations ascribe the asymmetry of the bound dianionic substrate to the trans donor effect of an equatorially ligated tyrosinate ligand. In addition, the computations suggest that trans donation from the tyrosinate ligand may facilitate charge transfer from the substrate to yield the iron-bound semiquinone transition state, which is capable of reacting with dioxygen. In illustrating the importance of ligand trans effects in a biological system, the current study demonstrates the power of combining difference UVRR and optical spectroscopies to probe metal ligation in solution.

Substrate radical intermediates in soluble methane monooxygenase

EPR spin-trapping experiments were carried out using the three-component soluble methane monooxygenase (MMO). Spin-traps 5,5-dimethyl-1-pyrroline N-oxide (DMPO), alpha-4-pyridyl-1-oxide N-tert-butylnitrone (POBN), and nitrosobenzene (NOB) were used to investigate the possible formation of substrate radical intermediates during catalysis. In contrast to a previous report, the NADH-coupled oxidations of various substrates did not produce any trapped radical species when DMPO or POBN was present. However, radicals were detected by these traps when only the MMO reductase component and NADH were present. DMPO and POBN were found to be weak inhibitors of the MMO reaction. In contrast, NOB is a strong inhibitor for the MMO-catalyzed nitrobenzene oxidation reaction. When NOB was used as a spin-trap in the complete MMO system with or without substrate, EPR signals from an NOB radical were detected. We propose that a molecule of NOB acts simultaneously as a substrate and a spin-trap for MMO, yielding the long-lived radical and supporting a stepwise mechanism for MMO.

Site-directed mutagenesis and spectroscopic studies of the iron-binding site of (S)-2-hydroxypropylphosphonic acid epoxidase

(S)-2-Hydroxylpropanylphosphonic acid epoxidase (HppE) is a novel type of mononuclear non-heme iron-dependent enzyme that catalyzes the O2 coupled, oxidative epoxide ring closure of HPP to form fosfomycin, which is a clinically useful antibiotic. Sequence alignment of the only two known HppE sequences led to the speculation that the conserved residues His138, Glu142, and His180 are the metal binding ligands of the Streptomyces wedmorensis enzyme. Substitution of these residues with alanine resulted in significant reduction of metal binding affinity, as indicated by EPR analysis of the enzyme-Fe(II)-substrate-nitrosyl complex and the spectral properties of the Cu(II)-reconstituted mutant proteins. The catalytic activities for both epoxidation and self-hydroxylation were also either eliminated or diminished in proportion to the iron content in these mutants. The complete loss of enzymatic activity for the E142A and H180A mutants in vivo and in vitro is consistent with the postulated roles of the altered residues in metal binding. The H138A mutant is also inactive in vivo, but in vitro it retains 27% of the active site iron and nearly 20% of the wild-type activity. Thus, it cannot be unequivocally stated whether H138 is an iron ligand or simply facilitates iron binding due to proximity. The results reported herein provide initial evidence implicating an unusual histidine/carboxylate iron ligation in HppE. By analogy with other well-characterized enzymes from the 2-His-1-carboxylate family, this type of iron core is consistent with a mechanism in which both oxygen and HPP bind to the iron as a first step in the in the conversion of HPP to fosfomycin.

Roles of the equatorial tyrosyl iron ligand of protocatechuate 3,4-dioxygenase in catalysis

The active site Fe(III) of protocatechuate 3,4-dioxygenase (3,4-PCD) from Pseudomonas putida is ligated axially by Tyr447 and His462 and equatorially by Tyr408, His460, and OH(-). Tyr447 and OH(-) are displaced as protocatechuate (3,4-dihydroxybenzoate, PCA) chelates the iron and appear to serve as in situ bases to promote this process. The role(s) of Tyr408 is (are) explored here using mutant enzymes that exhibit less than 0.1% wild-type activity. The X-ray crystal structures of the mutants and their PCA complexes show that the new shorter residues in the 408 position cannot ligate the iron and instead interact with the iron through solvents. Moreover, PCA binds as a monodentate rather than a bidentate ligand, and Tyr447 fails to dissociate. Although the new residues at position 408 do not directly bind to the iron, large changes in the spectroscopic and catalytic properties are noted among the mutant enzymes. Resonance Raman features show that the Fe-O bond of the monodentate 4-hydroxybenzoate (4HB) inhibitor complex is significantly stronger in the mutants than in wild-type 3,4-PCD. Transient kinetic studies show that PCA and 4HB bind to 3,4-PCD in a fast, reversible step followed by a step in which coordination to the metal occurs; the latter process is at least 50-fold slower in the mutant enzymes. It is proposed that, in wild-type 3,4-PCD, the Lewis base strength of Tyr408 lowers the Lewis acidity of the iron to foster the rapid exchange of anionic ligands during the catalytic cycle. Accordingly, the increase in Lewis acidity of the iron caused by substitution of this residue by solvent tends to make the iron substitution inert. Tyr447 cannot be released to allow formation of the usual dianionic PCA chelate complex with the active site iron, and the rate of electrophilic attack by O(2) becomes rate limiting overall. The structures of the PCA complexes of these mutant enzymes show that hydrogen-bonding interactions between the new solvent ligand and the new second-sphere residue in position 408 allow this residue to significantly influence the spectroscopic and kinetic properties of the enzymes.

Aromatic ring cleavage by homoprotocatechuate 2,3-dioxygenase: role of His200 in the kinetics of interconversion of reaction cycle intermediates

Homoprotocatechuate 2,3-dioxygenase (WT 2,3-HPCD) isolated from Brevibacterium fuscum utilizes an active site Fe(II) and O(2) to catalyze proximal extradiol cleavage of the aromatic ring of the substrate (HPCA). Here, the conserved active site residue His200 is changed to Gln, Glu, Ala, Asn, and Phe, and the reactions of the mutant enzymes are probed using steady-state and transient kinetic techniques. Each mutant catalyzes ring cleavage of HPCA to yield the normal product. H200Q and H200N retain 30-40% of the WT 2,3-HPCD activity at 24 degrees C, but the other mutants reduce the k(cat) to less than 9% of normal. The origin of the reduced activity is unlikely to be the substrate binding phase of the catalytic cycle, because the multistep anaerobic binding reaction of the chromophoric substrate 4-nitrocatechol (4NC) is shown to proceed with rate constants similar to those observed for WT 2,3-HPCD. In contrast, the rate constants of several steps in the multistep O(2) binding/insertion and product release half of the reaction cycle are substantially slowed, in particular the steps in which activated oxygen attacks the organic substrate and in which product is released. In the case of the H200N mutant, the product of 4NC oxidation is not the usual ring cleavage product, but rather the 4NC quinone. These results suggest that the main role of His200 is in facilitating the steps in the second half of the reaction cycle. The decreased rate constants for the O(2) insertion steps in the catalytic cycles of the mutant enzymes allow the oxygen adduct of an extradiol dioxygenase to be detected for the first time.

ENDOR Studies of the Ligation and Structure of the Non-Heme Iron Site in ACC Oxidase

Ethylene is a plant hormone involved in all stages of growth and development, including regulation of germination, responses to environmental stress, and fruit ripening. The final step in ethylene biosynthesis, oxidation of 1-aminocyclopropane-1-carboxylic acid (ACC) to yield ethylene, is catalyzed by ACC oxidase (ACCO). In a previous EPR and ENDOR study of the EPR-active Fe(II)-nitrosyl, [FeNO],(7) complex of ACCO, we demonstrated that both the amino and the carboxyl moieties of the inhibitor d,l-alanine, and the substrate ACC by analogy, coordinate to the Fe(II) ion in the Fe(II)-NO-ACC ternary complex. In this report, we use 35 GHz pulsed and CW ENDOR spectroscopy to examine the coordination of Fe by ACCO in more detail. ENDOR data for selectively (15)N-labeled derivatives of substrate-free ACCO-NO (E-NO) and substrate/inhibitor-bound ACCO-NO (E-NO-S) have identified two histidines as protein-derived ligands to Fe; (1,2)H and (17)O ENDOR of samples in D(2)O and H(2)(17)O solvent have confirmed the presence of water in the substrate-free Fe(II) coordination sphere (E-NO). Analysis of orientation-selective (14,15)N and (17)O ENDOR data is interpreted in terms of a structural model of the ACCO active site, both in the presence (E-NO-S) and in the absence (E-NO) of substrate. Evidence is also given that substrate binding dictates the orientation of bound O(2).

Single-turnover kinetics of homoprotocatechuate 2,3-dioxygenase

Homoprotocatechuate 2,3-dioxygenase isolated from Brevibacterium fuscum utilizes an active site Fe(II) and O(2) to catalyze proximal extradiol cleavage of the substrate aromatic ring. In contrast to other members of the ring cleaving dioxygenase family, the transient kinetics of the extradiol dioxygenase catalytic cycle have been difficult to study because the iron is nearly colorless and EPR silent. Here, it is shown that the reaction cycle kinetics can be monitored by utilizing the alternative substrate 4-nitrocatechol (4NC), which is also cleaved in the proximal extradiol position. Changes in the optical spectrum of 4NC occurring as a result of ionization, environmental changes, and ring cleavage allow both the substrate binding and product formation phases of the reaction to be studied. It is shown that substrate binding occurs in a four-step process probably involving binding to two ionization states of the enzyme at different rates. Following an initial rapid binding of the monoanionic 4NC in the active site, slower binding to the Fe(II) and conversion to the dianionic form occur. The bound dianionic 4NC reacts rapidly with O(2) in four additional steps, apparently occurring in sequence. On the basis of the optical properties of the intermediates, these steps are hypothesized to be O(2) binding to the iron, isomerization of the resulting complex, ring opening, and product release. The natural substrate appears to form the same intermediates but with much larger rate constants. These are the first transient intermediates to be reported for an extradiol dioxygenase reaction.

Crystallographic comparison of manganese- and iron-dependent homoprotocatechuate 2,3-dioxygenases

The X-ray crystal structures of homoprotocatechuate 2,3-dioxygenases isolated from Arthrobacter globiformis and Brevibacterium fuscum have been determined to high resolution. These enzymes exhibit 83% sequence identity, yet their activities depend on different transition metals, Mn2+ and Fe2+, respectively. The structures allow the origins of metal ion selectivity and aspects of the molecular mechanism to be examined in detail. The homotetrameric enzymes belong to the type I family of extradiol dioxygenases (vicinal oxygen chelate superfamily); each monomer has four betaalphabetabetabeta modules forming two structurally homologous N-terminal and C-terminal barrel-shaped domains. The active-site metal is located in the C-terminal barrel and is ligated by two equatorial ligands, H214NE1 and E267OE1; one axial ligand, H155NE1; and two to three water molecules. The first and second coordination spheres of these enzymes are virtually identical (root mean square difference over all atoms, 0.19 A), suggesting that the metal selectivity must be due to changes at a significant distance from the metal and/or changes that occur during folding. The substrate (2,3-dihydroxyphenylacetate [HPCA]) chelates the metal asymmetrically at sites trans to the two imidazole ligands and interacts with a unique, mobile C-terminal loop. The loop closes over the bound substrate, presumably to seal the active site as the oxygen activation process commences. An "open" coordination site trans to E267 is the likely binding site for O2. The geometry of the enzyme-substrate complexes suggests that if a transiently formed metal-superoxide complex attacks the substrate without dissociation from the metal, it must do so at the C-3 position. Second-sphere active-site residues that are positioned to interact with the HPCA and/or bound O2 during catalysis are identified and discussed in the context of current mechanistic hypotheses.

Effector proteins from P450(cam) and methane monooxygenase: lessons in tuning nature's powerful reagents

Effector proteins alter the kinetic or catalytic course of many oxygenase reactions. One of the first oxygenase effectors to be described was putidaredoxin, which serves to gate electron transfer into oxy-P450(cam). In the nonheme, methane monooxygenase (MMO) system, the B-component (MMOB) serves a distinct effector function by gating substrate and oxygen into the active site of the hydroxylase component (MMOH). Here the binding parameters and binding surfaces of the MMOB-MMOH complex are determined by site-specific labeling, fluorescence titrations, chemical cross-linking, and MALDI-TOF peptide identification. Based on these data, a model for the bimolecular complex is described and a hypothesis for the structural basis for the effector function is elaborated. The bearing on the putidaredoxin effector function is discussed.

Biochemical and spectroscopic studies on (S)-2-hydroxypropylphosphonic acid epoxidase: a novel mononuclear non-heme iron enzyme

The last step of the biosynthesis of fosfomycin, a clinically useful antibiotic, is the conversion of (S)-2-hydroxypropylphosphonic acid (HPP) to fosfomycin. Since the ring oxygen in fosfomycin has been shown in earlier feeding experiments to be derived from the hydroxyl group of HPP, this oxirane formation reaction is effectively a dehydrogenation process. To study this unique C-O bond formation step, we have overexpressed and purified the desired HPP epoxidase. Results reported herein provided initial biochemical evidence revealing that HPP epoxidase is an iron-dependent enzyme and that both NAD(P)H and a flavin or flavoprotein reductase are required for its activity. The 2 K EPR spectrum of oxidized iron-reconstituted fosfomycin epoxidase reveals resonances typical of S = (5)/(2) Fe(III) centers in at least two environments. Addition of HPP causes a redistribution with the appearance of at least two additional species, showing that the iron environment is perturbed. Exposure of this sample to NO elicits no changes, showing that the iron is nearly all in the Fe(III) state. However, addition of NO to the Fe(II) reconstituted enzyme that has not been exposed to O(2) yields an intense EPR spectrum typical of an S = (3)/(2) Fe(II)-NO complex. This complex is also heterogeneous, but addition of substrate converts it to a single, homogeneous S = (3)/(2) species with a new EPR spectrum, suggesting that substrate binds to or near the iron, thereby organizing the center. The fact that NO binds to the ferrous center suggests O(2) can also bind at this site as part of the catalytic cycle. Using purified epoxidase and (18)O isotopic labeled HPP, the retention of the hydroxyl oxygen of HPP in fosfomycin was demonstrated. While ether ring formation as a result of dehydrogenation of a secondary alcohol has precedence in the literature, these catalyses require alpha-ketoglutarate for activity. In contrast, HPP epoxidase is alpha-ketoglutarate independent. Thus, the cyclization of HPP to fosfomycin clearly represents an intriguing conversion beyond the scope entailed by common biological epoxidation and C-O bond formation.

Mechanistic studies of 1-aminocyclopropane-1-carboxylic acid oxidase: single turnover reaction

The final step in the biosynthesis of the plant hormone ethylene is catalyzed by the non-heme iron-containing enzyme 1-aminocyclopropane-1-carboxylic acid (ACC) oxidase (ACCO). ACC is oxidized at the expense of O(2) to yield ethylene, HCN, CO(2), and two waters. Continuous turnover of ACCO requires the presence of ascorbate and HCO(3)(-) (or an alternative form), but the roles played by these reagents, the order of substrate addition, and the mechanism of oxygen activation are controversial. Here these issues are addressed by development of the first functional single turnover system for ACCO. It is shown that 0.35 mol ethylene/mol Fe(II)ACCO is produced when the enzyme is combined with ACC and O(2) in the presence of HCO(3)(-) but in the absence of ascorbate. Thus, ascorbate is not required for O(2) activation or product formation. Little product is observed in the absence of HCO(3)(-), demonstrating the essential role of this reagent. By monitoring the EPR spectrum of the sample during single turnover, it is shown that the active site Fe(II) oxidizes to Fe(III) during the single turnover. This suggests that the electrons needed for catalysis can be derived from a fraction of the initial Fe(II)ACCO instead of ascorbate. Addition of ascorbate at 10% of its K(m) value significantly accelerates both iron oxidation and ethylene formation, suggesting a novel high-affinity effector role for this reagent. This role can be partially mimicked by a non-redox-active ascorbate analog. A mechanism is proposed that begins with ACC and O(2) binding, iron oxidation, and one-electron reduction to form a peroxy intermediate. Breakdown of this intermediate, perhaps by HCO(3)(-)-mediated proton transfer, is proposed to yield a high-valent iron species, which is the true oxidizing reagent for the bound ACC.

Conversion of extradiol aromatic ring-cleaving homoprotocatechuate 2,3-dioxygenase into an intradiol cleaving enzyme

The intra- and extradiol subfamilies of catechol-adduct ring-cleaving dioxygenases each exhibit nearly absolute fidelity for the ring cleavage position. This is often attributed to the fact that the oxygen activation mechanism of intradiol dioxygenases utilizes Fe3+ while that of the extradiol enzymes employs Fe2+, but the subfamilies also differ in primary sequence, structural fold, iron ligands, and second sphere active site amino acid residues. Here, we examine the effects of the second sphere residue H200 in the active site of homoprotocatechuate 2,3-dioxygenase (2,3-HPCD), an extradiol-cleaving enzyme. It is shown that the H200F mutant enzyme catalyzes extradiol cleavage of the normal substrate, homoprotocatechuate (HPCA), but intradiol cleavage of the alternative substrate 2,3-dihydroxybenzoate (2,3-DHB) while in the Fe2+ oxidation state. Wild-type 2,3-HPCD catalyzes extradiol cleavage of both substrates. This is the first report of intradiol cleavage by an extradiol dioxygenase. It suggests that intradiol cleavage can occur with the iron in the Fe2+ state, with the iron ligand set characteristic of extradiol dioxygenases, and through a mechanism in which oxygen is activated by binding to the iron rather than directly attacking the substrate as in true intradiol dioxygenases. This indicates that substrate binding geometry and acid/base chemistry of second sphere residues play important roles in determining the course of the dioxygenase reaction.

Substrate binding to NO-ferro-naphthalene 1,2-dioxygenase studied by high-resolution Q-band pulsed 2H-ENDOR spectroscopy

The active site of naphthalene 1,2-dioxygenase (NDO) contains a Rieske Fe-S cluster and a mononuclear non-heme iron, which are contributed by different alpha-subunits in the (alphabeta)(3) structure. The enzyme catalyzes cis-dihydroxylation of aromatic substrates, in addition to numerous other adventitious oxidation reactions. High-resolution Mims (2)H-ENDOR (electron nuclear double resonance) spectra have been recorded for the NO-ferrous center of NDO bound with the substrates d(8)-naphthalene, d(2)-naphthalene, d(8)-toluene, d(3)-toluene, and d(6)-benzene; samples were prepared in a D(2)O buffer to test for solvent-derived ligands; spectra were collected for enzymes with the Rieske diiron center in both its oxidized and reduced states. A sharp quartet ENDOR pattern from a nearby deuteron of the substrate in a major binding geometry (denoted as A) was detected for all perdeuterated substrates. Examination of the sample prepared with 1,4-di-deutero-naphthalene shows that the signal arises from D1. Analysis of two-dimensional (2-D) orientation-selective ENDOR patterns collected for this sample defined the location of the D1 deuteron, with respect to the g-frame of the iron center and the orientation of the C-D1 bond. Consideration of the orientations of naphthalene that are permitted within the constraints of these results, as supported by a novel approach to simulations of orientation-selective, 2-D ENDOR patterns for the perdeuterated naphthalene sample, which summed contributions from D1/D2/D8, disclose the geometry of the naphthalene and the Fe-NO fragment. The two deuterons of the reactive carbons, D1 and D2, are closest to the Fe atom (r(Fe)(-)(D1) approximately 4.3 A, r(Fe)(-)(D2) approximately 5.0 A), whereas D8 is farther away (r(Fe)(-)(D8) approximately 5.3 A). Perhaps more instructive, D1-N and D2-N distances to the O(2) surrogate, NO, are approximately 2.4 and approximately 3.3 A, respectively, whereas the D8-N distance is approximately 3.7 A. The data show that benzene and the aromatic ring of toluene also sit within the substrate-binding pocket adjacent to the mononuclear Fe atom. These rings occupy a position similar to that of the "proximal" ring of naphthalene, with the closest ring deuteron being located at a distance of approximately 4.3-4.4 A from the Fe atom and with the Fe-D vector being slightly off the Fe-N(O) direction. In particular, comparison of the data for d(8)-toluene and methyl-d(3)-toluene shows that the methyl group of toluene points away from the Fe atom, despite observations that the oxidation of toluene occurs at the methyl group during catalysis. The Rieske cluster is reduced during both steady-state and single-turnover catalysis; therefore, the effect of its oxidation state on the geometry of substrate binding was examined. The spectra from the NDO-naphthalene complex also revealed a second binding conformation (denoted as B), in which the substrate is located approximately 0.5 A farther from the Fe atom. The relative populations of A- and B-sites are allosterically changed when the Rieske cluster is reduced. ENDOR of exchangeable protons shows that the water/hydroxide of Fe-NDO is retained upon binding NO.

Key amino acid residues in the regulation of soluble methane monooxygenase catalysis by component B

The regulatory component MMOB of soluble methane monooxygenase (sMMO) has been hypothesized to control access of substrates into the active site of the hydroxylase component (MMOH) through formation of a size specific channel or region of increased structural flexibility tuned to methane and O(2). Accordingly, a decrease in the size of four MMOB residues (N107G/S109A/S110A/T111A, the Quad mutant) was shown to accelerate the reaction of substrates larger than methane with the reactive MMOH intermediate Q [Wallar, B. J., and Lipscomb, J. D. (2001) Biochemistry 40, 2220-2233]. Here, this hypothesis is tested by construction of single and double mutations involving the residues of the Quad mutant. It is shown that mutations of residues that extend into the core structure of MMOB alter many aspects of the MMOH catalyzed reaction but do not mimic the effects of the Quad mutant. In contrast, the MMOB residues that are thought to form part of the interface in the MMOH-MMOB complex increase active site accessibility as observed for the Quad mutant. In particular, the mutant T111A mimics most of the effects of the Quad mutant; thus, Thr111 is proposed to most directly control access. Unexpectedly, mutation of Thr111 to the larger Tyr greatly increases the rate constant for the reaction of larger substrates such as ethane, furan, and nitrobenzene with Q while decreasing the rate constant for the reaction with methane. Other steps in the cycle are dramatically slowed, the regiospecificity for nitrobenzene oxidation is altered, and 10-fold more T111Y than wild-type MMOB is required to maximize the rate of turnover. Thus, T111Y appears to make a more extensive change in local interface structure that allows hydrocarbons at least as large as ethane to bind and react with Q similarly. As a result, the bond cleavage rates for methane, ethane, and their deuterated analogues are shown for the first time to correlate with bond strength in accord with a mechanism in which C-H bond cleavage occurs during reaction of substrates with Q.

Modulation of substrate binding to naphthalene 1,2-dioxygenase by rieske cluster reduction/oxidation

The active site of the oxygenase component of naphthalene 1,2-dioxygenase (NDO) contains a Rieske Fe-S cluster and a mononuclear non-heme iron, which are contributed by different alpha-subunits in the (alphabeta)(3) structure. The enzyme catalyzes cis-dihydroxylation of aromatic substrates in addition to numerous other adventitious oxidation reactions. High-resolution Mims (2)H-ENDOR spectra have been recorded for the NO-ferrous center of NDO bound with d(8)-naphthalene and d(2)-naphthalene; spectra were collected for the enzyme with the Rieske diiron center both in its oxidized and in its reduced states. A sharp quartet ENDOR pattern from a nearby deuteron of substrate was detected for each substrate. Examination of the sample prepared with 1,4-dideutero-naphthalene shows that the signal arises from D1. The ENDOR data place D1 at a distance of ca. 4.4 A from the mononuclear Fe and with the Fe-D vector being roughly along the Fe-N(O) direction. Because reduction of the Rieske cluster is required for O(2) binding and subsequent catalysis, the effect of its oxidation state on substrate binding was examined. The spectra from the NDO-naphthalene complex reveal two different binding conformations, which change in relative population when the oxidation state of the Rieske cluster is changed. This shift, and the conformational coupling it implies, may hold the key to both oxygen gating and oxygen reactivity for Rieske aromatic dioxygenases.

Spectroscopic studies of the effect of ligand donor strength on the Fe-NO bond intradiol dioxygenases

The geometric and electronic structure of NO bound to reduced protocatechuate 3,4-dioxygenase and its substrate (3,4-dihydroxybenzoate, PCA) complex have been examined by X-ray absorption (XAS), UV-vis absorption (Abs), magnetic circular dichroism (MCD), and variable temperature variable field (VTVH) MCD spectroscopies. The results are compared to those previously published on model complexes described as [FeNO]7 systems in which an S = 5/2 ferric center is antiferromagnetically coupled to an S = 1 NO-. XAS pre-edge analysis indicates that the Fe-NO units in FeIIIPCD[NO-] and FeIIIPCD[PCA,NO-] lack the greatly increased pre-edge intensity representative of most [FeNO]7 model sites. Furthermore, from extended X-ray absorption fine structure (EXAFS) analysis, the FeIIIPCD[NO-] and FeIIIPCD[PCA,NO-] active sites are shown to have an Fe-NO distance of at least 1.91 A, approximately 0.2 A greater than those found in the model complexes. The weakened Fe-NO bond is consistent with the overall lengthening of the bond lengths and the fact that VTVH MCD data show that NO(-)-->FeIII CT transitions are no longer polarized along the z-axis of the zero-field splitting tensor. The weaker Fe-NO bond derives from the strong donor interaction of the endogenous phenolate and substrate catecholate ligands, which is observed from the increased intensity in the CT region relative to that of [FeNO]7 model complexes, and from the shift in XAS edge position to lower energy. As NO is an analogue of O2, the effect of endogenous ligand donor strength on the Fe-NO bond has important implications with respect to O2 activation by non-heme iron enzymes.

Hydrogen peroxide-coupled cis-diol formation catalyzed by naphthalene 1,2-dioxygenase

Naphthalene 1,2-dioxygenase (NDOS) catalyzes the NAD(P)H and O(2)-dependent oxidation of naphthalene to (+)-cis-(1R,2S)-dihydroxy-1,2-dihydronaphthalene. NDOS consists of three protein components: a flavo-[2Fe-2S] reductase (NDR), a ferredoxin electron transfer protein (NDF), and an (alphabeta)(3) oxygenase (NDO) containing a mononuclear iron site and a Rieske-type [2Fe-2S] cluster in each alpha-subunit. The active site is built across a subunit-subunit boundary, and each subunit contributes one type of metal center. Our previous studies have shown that NDO with both metal centers reduced is capable of an O(2)-coupled single turnover to yield the correct cis-diol product in the absence of the NDR and NDF components (Wolfe, M. D., Parales, J. V., Gibson, D. T., and Lipscomb, J. D. (2001) J. Biol. Chem. 276, 1945-1953). It is shown here that addition of H(2)O(2) to NDO allows reaction with naphthalene to rapidly yield the correct product in a "peroxide shunt" reaction that does not require a reduced Rieske cluster. The mononuclear Fe(2+) center is oxidized during turnover, while the Rieske cluster remains in the oxidized state. Peroxide shunt turnover in the presence of (18)O-labeled H(2)O(2), H(2)O, or O(2) shows that both oxygen atoms in the product derive primarily from H(2)O(2). The peroxide shunt halts after one turnover despite the presence of excess H(2)O(2) and naphthalene, but this is not the result of enzyme inactivation. Rather, it appears that the product cannot be released when the mononuclear iron is in the Fe(3+) state, blocking a second turnover. This work supports the hypotheses that the cis-dihydroxylation activity of NDOS requires only the NDO component, that a peroxo intermediate is formed during normal catalysis, and that product release requires an additional reducing equivalent beyond those necessary for the first turnover.

Benzoate 1,2-dioxygenase from Pseudomonas putida: single turnover kinetics and regulation of a two-component Rieske dioxygenase

The benzoate 1,2-dioxygenase system (BZDOS) from Pseudomonas putida mt-2 catalyzes the NADH-dependent oxidation of benzoate to 1-carboxy-1,2-cis-dihydroxycyclohexa-3,5-diene. Both the oxygenase (BZDO) and reductase (BZDR) components of BZDOS have been purified and characterized kinetically and by optical, EPR, and Mössbauer spectroscopies. BZDO has an (alpha beta)(3) subunit structure in which each alpha subunit contains a Rieske [2Fe-2S] cluster and a mononuclear iron site. Two different purification protocols were developed for BZDO allowing the mononuclear iron to be stabilized in either the Fe(III) or the Fe(II) state for spectroscopic characterization. Using single turnover reactions, it is shown that fully reduced BZDO alone is capable of yielding the cis-diol product in high yield at rates that exceed the BZDOS turnover number. At the conclusion of turnover, quantification of each oxidation state of the metal sites by EPR and Mössbauer spectroscopies shows that the Rieske cluster and mononuclear iron are each oxidized in amounts equal to the product yield, suggesting that the two electrons required for catalysis derive from the two metal centers. These results are in agreement with our previous study of naphthalene 1,2-dioxygenase [Wolfe, M. D., Parales, J. V., Gibson, D. T., and Lipscomb, J. D. (2001) J. Biol. Chem. 276, 1945-1953], which belongs to a different Rieske dioxygenase subclass, suggesting that it is a universal characteristic of Rieske dioxygenases that oxygen activation and substrate oxidation are catalyzed by the oxygenase component alone. The EPR spectrum of the Fe(III) center after a single turnover is distinct from either of those of substrate-free or substrate-bound enzyme. The complex with this spectrum is not formed by addition of cis-diol product to the resting Fe(III) form of the enzyme but is observed when the Fe(II) form is oxidized in the presence of product. Together, these results suggest that product exchange occurs only when the mononuclear iron is reduced. Stopped-flow and rapid scan analyses monitoring the oxidation of the Rieske cluster during the single turnover reaction show that it occurs in three phases that are kinetically competent for catalysis. The rate of each phase was found to be dependent on the type of substrate present, suggesting that the substrate influences the rate of electron transfer between the metal clusters. The participation of substrate in the oxygen activation reaction suggests a new aspect of the mechanism of this process by the Rieske dioxygenase class.

Spectroscopic studies of 1-aminocyclopropane-1-carboxylic acid oxidase: molecular mechanism and CO(2) activation in the biosynthesis of ethylene

1-Aminocyclopropane-1-carboxylic acid (ACC) oxidase (ACCO) catalyzes the last step in the biosynthesis of the gaseous plant hormone ethylene, which is involved in development, including germination, fruit ripening, and senescence. ACCO is a mononuclear non-heme ferrous enzyme that couples the oxidation of the cosubstrate ascorbate to the oxidation of substrate ACC by dioxygen. In addition to substrate and cosubstrate, ACCO requires the activator CO(2) for continuous turnover. NIR circular dichroism and magnetic circular dichroism spectroscopies have been used to probe the geometric and electronic structure of the ferrous active site in ACCO to obtain molecular-level insight into its catalytic mechanism. Resting ACCO/Fe(II) is coordinatively saturated (six-coordinate). In the presence of CO(2), one ferrous ligand is displaced to yield a five-coordinate site only when both the substrate ACC and cosubstrate ascorbate are bound to the enzyme. The open coordination position allows rapid O(2) activation for the oxidation of both substrates. In the absence of CO(2), ACC binding alone converts the site to five-coordinate, which would react with O(2) in the absence of ascorbate and quickly deactivate the enzyme. These studies show that ACCO employs a general strategy similar to other non-heme iron enzymes in terms of opening iron coordination sites at the appropriate time in the reaction cycle and define the role of CO(2) as stabilizing the six-coordinate ACCO/Fe(II)/ACC complex, thus preventing the uncoupled reaction that inactivates the enzyme.

Spectroscopic and electronic structure studies of protocatechuate 3,4-dioxygenase: nature of tyrosinate-Fe(III) bonds and their contribution to reactivity

The geometric and electronic structure of the high-spin ferric active site of protocatechuate 3,4-dioxygenase (3,4-PCD) has been examined by absorption (Abs), circular dichroism (CD), magnetic CD (MCD), and variable-temperature-variable-field (VTVH) MCD spectroscopies. Density functional (DFT) and INDO/S-CI molecular orbital calculations provide complementary insight into the electronic structure of 3,4-PCD and allow an experimentally calibrated bonding scheme to be developed. Abs, CD, and MCD indicate that there are at least seven transitions below 35 000 cm(-1) which arise from tyrosinate ligand-to-metal-charge transfer (LMCT) transitions. VTVH MCD spectroscopy gives the polarizations of these LMCT bands in the principal axis system of the D-tensor, which is oriented relative to the molecular structure from the INDO/S-CI calculations. Three transitions are associated with the equatorial tyrosinate and four with the axial tyrosinate. This large number of transitions per tyrosinate is due to the pi and importantly the sigma overlap of the two tyrosinate valence orbitals with the metal d orbitals and is governed by the Fe-O-C angle and the Fe-O-C-C dihedral angles. The previously reported crystal structure indicates that the Fe-O-C angles are 133 degrees and 148 degrees for the equatorial and axial tyrosinate, respectively. Each tyrosinate has transitions at different energies with different intensities, which correlate with differences in geometry that reflect pseudo-sigma bonding to the Fe(III) and relate to reactivity. These factors reflect the metal-ligand bond strength and indicate that the axial tyrosinate-Fe(III) bond is weaker than the equatorial tyrosinate-Fe(III) bond. Furthermore, it is found that the differences in geometry, and hence electronic structure, are imposed by the protein. The consequences to catalysis are significant because the axial tyrosinate has been shown to dissociate upon substrate binding and the equatorial tyrosinate in the enzyme-substrate complex is thought to influence asymmetric binding of the chelated substrate moiety via a strong trans influence which activates the substrate for reaction with O2.

Intermediate Q from soluble methane monooxygenase hydroxylates the mechanistic substrate probe norcarane: evidence for a stepwise reaction

Norcarane is a valuable mechanistic probe for enzyme-catalyzed hydrocarbon oxidation reactions because different products or product distributions result from concerted, radical, and cation based reactions. Soluble methane monooxygenase (sMMO) from Methylosinus trichosporium OB3b catalyzes the oxidation of norcarane to afford 3-hydroxymethylcyclohexene and 3-cycloheptenol, compounds characteristic of radical and cationic intermediates, respectively, in addition to 2- and 3-norcaranols. Past single turnover transient kinetic studies have identified several optically distinct intermediates from the catalytic cycle of the hydroxylase component of sMMO. Thus, the reaction between norcarane and key reaction intermediates can be directly monitored. The presence of norcarane increases the rate of decay of only one intermediate, the high-valent bis-mu-oxo Fe(IV)(2) cluster-containing species compound Q, showing that it is responsible for the majority of the oxidation chemistry. The observation of products from both radical and cationic intermediates from norcarane oxidation catalyzed by sMMO is consistent with a mechanism in which an initial substrate radical intermediate is formed by hydrogen atom abstraction. This intermediate then undergoes either oxygen rebound, intramolecular rearrangement followed by oxygen rebound, or loss of a second electron to yield a cationic intermediate to which OH(-) is transferred. The estimated lower limit of 20 ps for the lifetime of the putative radical intermediate is in accord with values determined from previous studies of sterically hindered sMMO probes.

Desaturation reactions catalyzed by soluble methane monooxygenase

Soluble methane monooxygenase (MMO) is shown to be capable of catalyzing desaturation reactions in addition to the usual hydroxylation and epoxidation reactions. Dehydrogenated products are generated from MMO-catalyzed oxidation of certain substrates including ethylbenzene and cyclohexadienes. In the reaction of ethylbenzene, desaturation of ethyl C-H occurred along with the conventional hydroxvlations of ethyl and phenyl C-Hs. As a result, styrene is formed together with ethylphenols and phenylethanols. Similarly, when 1,3- and 1,4-cyclohexadienes were used as substrates, benzene was detected as a product in addition to the corresponding alcohols and epoxides. In all cases, reaction conditions were found to significantly affect the distribution among the different products. This new activity of MMO is postulated to be associated with the chemical properties of the substrates rather than fundamental changes in the nature of the oxygen and C-H activation chemistries. The formation of the desaturated products is rationalized by formation of a substrate cationic intermediate, possibly via a radical precursor. The cationic species is then proposed to partition between recombination (alcohol formation) and elimination (alkene production) pathways. This novel function of MMO indicates close mechanistic kinship between the hydroxylation and desaturation reactions catalyzed by the nonheme diiron clusters.

Residues in Methylosinus trichosporium OB3b methane monooxygenase component B involved in molecular interactions with reduced- and oxidized-hydroxylase component: a role for the N-terminus

Methane monooxygenase (MMO) is a non-heme-iron-containing enzyme which consists of 3 protein components: a hydroxylase (MMOH), an NAD(P)H-linked reductase (MMOR), and a 138-residue regulatory protein, component B (MMOB). Here, NMR spectroscopy has been used to derive interactions between MMOB and reduced and oxidized states of MMOH (245 kDa). Differential broadening of MMOB resonances in 1H-15N HSQC spectra acquired at different molar ratios of MMOH indicates interaction of both proteins, with MMOB binding more tightly to oxidized MMOH as observed previously. The most broadened backbone NH resonances suggest which residues in MMOB are part of the MMOH-binding interface, particularly when those residues are spatially close or clustered in the structure of MMOB. Although a number of different residues in MMOB appear to be involved in interacting with oxidized- and reduced-MMOH, some are identical. The two most common segments, proximal in the structure of MMOB, are beta-strand 1 with turn 1 (residues 36-46) and alpha-helix 3 going into loop 2 (residues 101-112). In addition, the N-terminus of MMOB is observed to be involved in binding to MMOH in either redox state. This is most strongly evidenced by use of a synthetic N-terminal peptide from MMOB (residues 1-29) in differential broadening 1H TOCSY studies with MMOH. Binding specificity is demonstrated by displacement of the peptide from MMOH by parent MMOB, indicating that the peptide binds in or near the normal site of N-terminal binding. The N-terminus is also observed to be functionally important. Steady-state kinetic studies show that neither a delta2-29 MMOB deletion mutant (which in fact does bind to MMOH), the N-terminal peptide, nor a combination of the two elicit the effector functions of MMOB. Furthermore, transient kinetic studies indicate that none of the intermediates of the MMOH catalytic cycle are observed if either the delta2-29 MMOB mutant or the N-terminal peptide is used in place of MMOB, suggesting that deletion of the N-terminus prevents reaction of reduced MMOH with O2 that initiates catalysis.

Methane monooxygenase component B mutants alter the kinetics of steps throughout the catalytic cycle

Component interactions play important roles in the regulation of catalysis by methane monooxygenase (MMO). The binding of component B (MMOB) to the hydroxylase component (MMOH) has been shown in previous studies to cause structural changes in MMOH that result in altered thermodynamic and kinetic properties during the reduction and oxygen binding steps of the catalytic cycle. Here, specific amino acid residues of MMOB that play important roles in the interconversion of several intermediates of the MMO cycle have been identified. Both of the histidine residues in Methylosinus trichosporium OB3b MMOB (H5 and H33) were chemically modified by diethylpyrocarbonate (DEPC). Although the DEPC--MMOB species exhibited only minor changes relative to unmodified MMOB in steady-state MMO turnover, large decreases in the formation rate constants of the reaction cycle intermediates, compound P and compound Q, were observed. The site specific mutants H5A, H33A, and H5A/H33A were made and characterized. H5A and wild type MMOB elicited similar steady-state and transient kinetics, although the mutant caused a slightly lower rate constant for Q formation. Conversely, H33A exhibited a >50-fold decrease in the P formation rate constant, which resulted in slower formation of Q. The kinetics of the double mutant (H5A/H33A) were similar to those of H33A, suggesting that the highly conserved residue, H33, has the most significant effect on the efficient progress of the cycle. Ongoing NMR investigations of residues perturbed by formation of the MMOH-MMOB complex suggested construction of the MMOB N107G/S109A/S110A/T111A quadruple mutant. This mutant was found to elicit a nearly 2-fold increase in specific activity for steady-state MMO turnover of large substrates such as furan and nitrobenzene but caused no similar increase for the physiological substrate, methane. While the quadruple mutant did not have a significant effect on P and Q formation, it caused an almost 3-fold increase in the decay rate constant of Q for furan oxidation and a 2-fold faster product release rate constant for p-nitrophenol resulting from nitrobenzene oxidation. Conversely, this mutant caused the Q decay rate constant to decrease 7-fold for methane oxidation but left the product release step unaffected. These results show for the first time that MMOB exerts influence at late as well as early steps in the catalytic cycle. They also suggest that MMOB plays a critical role in determining the ability of MMO to distinguish between methane and larger substrates.

Single turnover chemistry and regulation of O2 activation by the oxygenase component of naphthalene 1,2-dioxygenase

Naphthalene 1,2-dioxygenase (NDOS) is a three-component enzyme that catalyzes cis-(1R,2S)-dihydroxy-1,2-dihydronaphthalene formation from naphthalene, O2, and NADH. We have determined the conditions for a single turnover of NDOS for the first time and studied the regulation of catalysis. As isolated, the alpha3beta3 oxygenase component (NDO) has up to three catalytic pairs of metal centers (one mononuclear Fe2+ and one diferric Rieske iron-sulfur cluster). This form of NDO is unreactive with O2. However, upon reduction of the Rieske cluster and exposure to naphthalene and O2, approximately 0.85 cis-diol product per occupied mononuclear iron site rapidly forms. Substrate binding is required for oxygen reactivity. Stopped-flow and chemical quench analyses indicate that the rate constant of the single turnover product-forming reaction significantly exceeds the NDOS turnover number. UV-visible and electron paramagnetic resonance spectroscopies show that during catalysis, one mononuclear iron and one Rieske cluster are oxidized per product formed, satisfying the two-electron reaction stoichiometry. The addition of oxidized or reduced NDOS ferredoxin component (NDF) increases both the product yield and rate of oxidation of formerly unreactive Rieske clusters. The results show that NDO alone catalyzes dioxygenase chemistry, whereas NDF appears to serve only an electron transport role, in this case redistributing electrons to competent active sites.