Pulpal response to mineral trioxide aggregate containing phosphorylated pullulan-based capping material

This study aimed to evaluate the pulpal responses of monkey's pulp after direct pulp capping (DPC) with the novel mineral trioxide aggregate containing phosphorylated pullulan-based material (MTAPPL). Seventy-two teeth were randomly divided into four groups: MTAPPL; Nex-Cem MTA (NX); TheraCal LC (TH); and Dycal (DY). Histopathological changes in the pulps were observed at days 3, 7 and 70. On day 3, mild inflammatory responses were observed in the MTAPPL, no to moderate inflammatory responses in the TH, whereas moderate inflammatory responses in the NX and DY. No mineralized tissue formation (MTF) was observed in all groups. On day 7, no or mild inflammatory responses were observed in all groups. Initial MTF was observed except for DY. No inflammation with complete MTF including presence of odontoblast-like cells was observed in the MTAPPL, NX and TH groups at day 70. These findings indicate that MTAPPL could be an efficient DPC material.

Surface roughness and shear bond strength to composite resin of additively manufactured interim restorative material with different printing orientations

STATEMENT OF PROBLEM

Additive manufacturing (AM) is a technology that has been recently introduced into dentistry for fabricating dental devices, including interim restorations. Printing orientation is one of the important and influential factors in AM that affects the accuracy, surface roughness, and mechanical characteristics of printed objects. However, the optimal print orientation for best bond strength to 3D-printed interim restorations remains unclear.

PURPOSE

The purpose of this in vitro study was to evaluate the effect of printing orientation on the surface roughness, topography, and shear bond strength of AM interim restorations to composite resin.

MATERIAL AND METHODS

Disk-shaped specimens (Ø20×10 mm) were designed by a computer-aided design software program (Geomagic freeform), and a standard tessellation language (STL) file was obtained. The STL file was used for the AM of 60 disks in 3 different printing orientations (0, 45, and 90 degrees) by using E-Dent 400 C&B material. An autopolymerizing interim material (Protemp 4) was used as a control group (CNT), and specimens were fabricated by using the injecting mold technique (n=20). Surface roughness (Sa, Sz parameters) was measured by using a 3D-laser scanning confocal microscope (CLSM) at ×20 magnification. For shear bond testing, the specimens were embedded in polymethylmethacrylate autopolymerized resin (n=20). A flowable composite resin was bonded by using an adhesive system. The specimens were stored in distilled water at 37 °C for 1 day and thermocycled 5000 times. The shear bond strength (SBS) was measured at a crosshead speed of 1 mm/min. The data were analyzed by 1-way ANOVA, followed by the Tukey HSD test (α=.05).

RESULTS

The 45-degree angulation printing group reported the highest Sa, followed by the CNT and the 90-degree and 0-degree angulations with significant difference between them (P<.001). The CNT showed the highest Sz, followed by the 45-degree, 90-degree, and 0-degree angulations. The mean ±standard deviation SBS was 28.73 ±5.82 MPa for the 90-degree, 28.21 ±10.69 MPa for the 45-degree, 26.21 ±11.19 MPa for the 0-degree angulations and 25.39 ±4.67 MPa for the CNT. However, no statistically significant difference was found in the SBS among the groups (P=.475).

CONCLUSIONS

Printing orientation significantly impacted the surface roughness of 3D-printed resin for interim restorations. However, printing orientation did not significantly affect the bond strength with composite resin.

Anti-Demineralization Effects of Dental Adhesive-Composites on Enamel-Root Dentin Junction

Oral biofilm reactor (OBR) and pH cycling (pHC) artificial caries model were employed to evaluate the anti-demineralization effects of four composite filling systems on enamel-root dentin junction. Sixty-four enamel-root dentin blocks (6 mm × 6 mm × 2 mm) each with a cylindrical cavity were randomly assigned to the pHC and OBR group, then four subgroups (n = 8) and filled with either the Beautifil II (BEF, SPRG-filler-containing) or Estelite (EST) composite after the adhesive (either Single Bond Universal (SBU) or FL Bond II (FL, SPRG-filler-containing)). The demineralization lesions of filling interface were examined by micro-computerized tomography (μCT) and swept-source-optical coherence tomography (SS-OCT). According to the degree of interface damage, the caries lesions were sorted into four types: Type A and B (no attachment loss); Type C and D (attachment loss). EST/SBU showed the worst demineralization lesion and attachment loss (100% Type D), while BEF/FL exhibited the shallowest lesion depth (p < 0.05, 145 ± 45 μm on enamel, 275 ± 35 μm on root dentin) and no attachment loss (75% Type A and 25% Type B). Using FL adhesive alone does not effectively reduce enamel demineralization. BEF plays a leading role in acid resistance. The combination of BEF and FL showed a cumulative synergistic effect on anti-demineralization.

Influence of the resin-coating technique on the bonding performance of self-adhesive resin cements in single-visit computer-aided design/computer-aided manufacturing resin restorations

OBJECTIVE

This in vitro study investigated the influence of resin coating on the bonding performance of self-adhesive resin cements in single-visit computer-aided design (CAD)/computer-aided manufacturing (CAM) resin restorations.

MATERIALS AND METHOD

CAD/CAM resin (1.5-mm thick) was mounted on 20 noncoated and 20 resin-coated human dentin surfaces using dual-cured self-adhesive resin cements (Panavia SA Cement Plus or Panavia SA Cement Universal, Kuraray Noritake Dental) in either self-curing or dual-curing mode. These specimens were sectioned into beam-shaped sticks and subjected to microtensile bond strength tests after 24 h of water storage. The obtained data were statistically analyzed with three-way analysis of variance (ANOVA) and t tests (α = 0.05).

RESULTS

The three-way ANOVA results revealed the significant influence of resin coating, resin cement, and curing mode. Resin coating and light curing led to higher bond strengths in almost all groups. Resin-coated dentin with Panavia SA Cement Plus exhibited a mean bond strength greater than 35 MPa in both self-curing and dual-curing modes.

CONCLUSIONS

In single-visit CAD/CAM resin restorations, resin coating, resin cement selection, and curing mode influenced the bonding performance of self-adhesive resin cements. In addition, resin coating and light curing increased the bond strength of self-adhesive resin cements. Resin coating and light curing are encouraged for predictable bonding performance of dual-cured self-adhesive resin cements in single-visit CAD/CAM resin restorations.

Influence of 10-methacryloyloxydecyl dihydrogen phosphate (MDP) incorporated experimental cleaners on the bonding performance of saliva-contaminated zirconia ceramic

OBJECTIVES

To assess the efficacy of experimental cleaners containing 10-methacryloyloxydecyl dihydrogen phosphate (MDP) on the saliva decontamination of ceramic and their influence in restoring zirconia's adherence to resin cement.

MATERIALS AND METHODS

Four hundred sixty alumina-blasted zirconia specimens were categorized into saliva-contaminated and uncontaminated groups which were treated with ceramic primer (P), experimental cleaner 1 (C1), C1 followed by P (C1P), experimental cleaner 2 (C2), and C2 followed by P (C2P). Stainless-steel rods were then attached to the specimens using PanaviaV5 cement (Kuraray Noritake Dental; Tokyo, Japan). Tensile bond strength (TBS) test was performed after 24 h and 5000 thermocycling processes. X-ray photoelectron spectroscopy (XPS) analysis and contact angle measurement of the specimen were performed. The TBS data were analyzed by Weibull analysis and three-way ANOVA. Contact angle data were analyzed by two-way ANOVA (α = 0.05).

RESULTS

C2P groups showed the highest TBS in all conditions among tested groups. Saliva contamination led to a significant reduction of TBS in primer- and cleaner-treated groups, with no significant impact on C2P. Adhesive failure was predominant in contaminated groups except with the C1P and C2P groups. XPS revealed that a nitrogen peak was observed on contaminated groups but not in primed groups. The contact angle was significantly affected by saliva contamination, the cleaners, and/or ceramic primer usage (p < 0.001).

CONCLUSIONS

The MDP cleaner followed by the MDP primer protocol may overcome the effect of saliva contamination and improve the resin-ceramic bond strength.

CLINICAL RELEVANCE

It is recommended to use a combination of MDP-containing cleaner 2 and ceramic primer as a chair-side chemical pretreatment for zirconia substrate with or without saliva contamination.

Dentin anti-demineralization potential of surface reaction-type pre-reacted glass-ionomer filler containing self-adhesive resin cement

OBJECTIVE

To investigate the anti-demineralization potential of a newly developed surface reaction-type pre-reacted glass-ionomer (S-PRG) filler containing self-adhesive resin cement against acidic attacks on the dentin surface.

MATERIALS AND METHODS

A total of 32 bovine teeth were used. Cavities were prepared on crown dentin slaps and filled with three self-adhesive resin cement: (1) S-PRG-based cement, (2) Si-based cement, and (3) RelyX cement. Specimens were then subjected to pH cycling for 28 days, and the depth of demineralization was assessed using swept-source optical coherence tomography (SS-OCT) after 7, 14, 21, and 28 days. Sixty-four root dentin blocks were divided into four groups and then subjected to a pH cycling procedure with the aforementioned three material blocks and one negative control. The mineral loss was observed using transverse microradiography (TMR), and the surface microhardness (SMH) test was conducted to investigate the mechanical properties of treated dentin surfaces.

RESULTS

The depth of demineralization for the S-PRG-based cement was significantly lower than that of the Si-based cement after 7, 21, and 28 days. Conversely, the RelyX cement was not significantly different from the Si-based cement after 7, 14, and 21 days (p < 0.05). Regarding the TMR and SMH test, the S-PRG-based cement showed the least mineral loss with the highest resistance to acidic challenge.

CONCLUSION

The S-PRG filler containing resin cement can reduce mineral loss and promote remineralization of dentin substrate and has the potential to preserve dentin integrity and resist acidic attack. Clinical significance Self-adhesive resin cement containing S-PRG fillers maintained the surface integrity of dentin after exposure to 28 days of acidic challenge with a significant anti-demineralization effect.

Retention of posterior resin bonded fixed dental prostheses with different designs after chewing simulation

The aim of this study was to evaluate the effect of different preparation and framework designs on the retention of posterior resin bonded fixed dental prostheses (RBFDPs) made from monolithic zirconia ceramic. Forty-eight caries-free upper premolars and forty-eight upper third molars were used in this study. The teeth were randomly divided into six main groups (n = 8 each) according to the preparation design of two-retainer RBFDPs: narrow or wide rest, combined with 0, 1 or 2 retainer wings. All RBFDPs were milled from monolithic zirconia (KATANA Zirconia ML). They were bonded using Panavia V5 with its corresponding primer, and underwent thermodynamic loading (98 N, 1,200,000 cycles). Retention was evaluated for the surviving RBFDPs in a universal testing machine by means of a debonding test. Failure modes were evaluated using a light microscope. Data was statistically analyzed by Kruskal-Shapiro-Wilk followed by Mann-Whitney with Bonferroni correction for multiple testing. The survival rates after the chewing simulation were 75% (group narrow rest/no retainer wing), 62.5% (group wide rest/no retainer wing) and 100% (the other groups). The mean retention ranged from 31 N to 766 N. Designs with two retainer wings showed significantly higher bond strength than the other designs (p ≤ 0.05). The rest width did not show a significant effect on the retention. Posterior RBFDPs with a modified design (occlusal rest and two retainer wings) exhibited promising durability and retention. Designs with two additional retainer wings should be preferred over designs with one or no retainer wing, irrespectively of the rest width.

Progression of non-carious cervical lesions: 3D morphological analysis

OBJECTIVES

This longitudinal study aimed to investigate morphologically and quantitatively the progression of non-carious cervical lesions (NCCLs) using a confocal laser scanning microscope (CLSM) and replica models.

MATERIALS AND METHODS

The samples examined comprised sets of replicas annually obtained from 83 lesions in 16 participants over 3 to 5 years. All lesions were visually categorized as wedge-shaped, saucer-shaped, or mixed-shaped lesions. CLSM images of the replicas were analyzed in terms of axial depth, occlusogingival width (height) in the buccolingual cross-section, and estimated volume using a custom code of the image analysis software to estimate the progression of the NCCLs over time. The morphological characteristics of the NCCLs were also objectively divided into three groups according to the depth to height ratio (D/H ratio). Fisher's exact test and the Cochran-Armitage trend test were used for statistical analysis.

RESULTS

Saucer-shaped lesions progressed mainly in height, whereas wedge-shaped lesions increased both in height and depth. Annual progression in depth and volume significantly increased as the D/H ratio increased. More than half of the NCCLs with a small D/H ratio progressed 50 μm or more in height, whereas none of them progressed more than 50 μm in depth. Annual progression in depth significantly increased as the lesion depth at baseline increased.

CONCLUSIONS

Progression patterns significantly differed between NCCLs of different shapes. Most NCCLs progressed slowly in depth regardless of their shape. Moreover, NCCLs may progress through active and inactive stages.

Effect of Surface Moisture on Bur-cut Dentin on Bonding of HEMA-free and HEMA-containing Universal Adhesives with or without Methacrylamide Monomer

PURPOSE

The effect of surface moisture on bur-cut dentin on the microtensile bond strength (μTBS) of universal adhesives with various contents of 2-hydroxyethyl methacrylate (HEMA) and methacrylamide monomers was evaluated.

MATERIALS AND METHODS

Flat mid-coronal dentin surfaces of human molars were exposed, and a standardized smear layer was prepared using a fine-grit diamond bur. The surfaces were either left wet or air dried for 10 s before bonding with Clearfil Universal Bond Quick (UBQ), experimental UBQ without an amide monomer (UBQexp), Scotchbond Universal (SBU), Prime&Bond Universal (PBU), or BeautiBond Universal (BBU). The specimens were built up with resin composite, sectioned into sticks and subjected to the μTBS test after 24 h or 10,000 thermal cycles. The μTBS data were analyzed using three-way ANOVA followed by pairwise comparisons with Bonferroni's correction (α = 0.05).

RESULTS

The level of dentin moisture did not significantly affect μTBS of UBQ and BBU (p > 0.05). HEMA-containing UBQ, UBQexp, and SBU exhibited higher μTBS to dry dentin, while HEMA-free PBU and BBU showed higher μTBS to wet dentin. Thermocycling significantly decreased the μTBS of UBQexp (p < 0.01) and BBU (p < 0.001) irrespective of dentin moisture level, while SBU was significantly affected only on dry dentin (p < 0.001). Thermocycling had no significant effect on UBQ and PBU containing methacrylamide monomers (p > 0.05).

CONCLUSION

Dry surfaces enabled obtaining optimal bonding for HEMA-containing adhesives to bur-cut dentin, while wet surfaces enabled optimal bonding for HEMA-free adhesives. Methacrylamide monomers could contribute to the improvement of the initial and long-term bonding performance of universal adhesives to bur-cut dentin.

The effect of in-office bleaching materials with different pH on the surface topography of bovine enamel

This study evaluated the alterations of surface topography of the bovine enamel caused by different pH of in-office bleaching agents. 23% H₂O₂ with pH 5.5, 7.0 and 8.5 were applied on the bovine tooth specimens (n=10) and photo-irradiated for 10 min. The bleaching procedure was repeated three times and specimens were subjected to linear surface roughness (Ra) and Vickers microhardness test (VHN) at baseline and after three consecutive applications. The morphological alterations were observed before and after third bleaching application. Data were analyzed by two-way ANOVA followed by Tukey's HSD. The pH of the bleaching agent significantly affects the Ra and VHN (p<0.05). Low pH yielded a significant increase in Ra and decrease in VHN. All the groups showed morphological alterations and profound effect was found in pH 5.5 group. It was concluded that the pH of the bleaching agent can affect Ra, VHN and surface morphology.

Update on Enamel Bonding Strategies

Optimal strategies for the application of an adhesive differ between enamel and dentin because of the differences in their composition. The development of adhesive systems has mainly focused on the bonding of dentin, rather than on the enamel, by etching with phosphoric acid (PA). Dental adhesive technologies continue to rapidly advance, and various adhesive systems have been developed since the study of Buonocore in 1955. He introduced the enamel acid-etch technique. Then, the etch-and-rinse (ER) system was developed, and subsequently, the self-etch (SE) system. Universal adhesives are a new generation of one-bottle SE adhesives that can be applied with either ER mode or SE mode, or a combined system involving selective enamel etching mode. Since the combination of PA etching and the SE system differs from conventional ER systems, the enamel bonding strategy should be carefully considered. This concise review of the literature on reliable enamel bonding strategies should prove helpful to clinicians to choose an appropriate adhesive system to achieve optimal clinical outcomes.

Effect of fluoride-releasing 4-META/MMA-TBB resin on enamel demineralization around orthodontic brackets: An in vitro µCT analysis

This study aimed to evaluate the impact of fluoride-releasing 4-META/MMA-TBB resin on the degree of enamel demineralization typically detected around orthodontic brackets using μCT. Enamel-dentin blocks were prepared from bovine teeth. Brackets were attached with either 4-META/MMA-TBB resin (SBC), fluoride-releasing 4-META/MMA-TBB resin (SBF), or fluoride-releasing RMGIC (FLC). The specimens were subjected to demineralization (pH 4.5, 21 days) and scanned by μCT (0, 7, and 21 days). Fluoride ion release under the experimental conditions was measured. The degree of demineralization detected in SBF and FLC was significantly lower than that in SBC; there were no significant differences in the degree of demineralization detected in SBF and FLC. The level of fluoride ion detected in FLC was significantly higher than that detected in SBC. Fluoride-releasing 4-META/MMA-TBB resin protected against enamel demineralization around orthodontic brackets when compared to the results from the fluoride-free resin.

Effects of Different Tooth Conditioners on the Bonding of Universal Self-etching Adhesive to Enamel

PURPOSE

To investigate the effects of several etching products prior to the application of a one-step self-etch adhesive (1-SEA) or two-step self-etch adhesive (2-SEA) on enamel by microshear bond strength (µSBS) testing and observation of the adhesive-enamel interface.

MATERIALS AND METHODS

Ground human enamel surfaces were randomly assigned to one of eight groups according to the combination of surface treatments (either no conditioner [NC], ME [Multi Etchant], EC [Enamel Conditioner], or KE [K-etchant Gel]) and adhesive (ADU [Adhese Universal] or SE2 [Clearfil SE Bond 2]). All groups were further divided into two subgroups: 0 or 10,000 thermal cycles (TC). Then, the µSBS test was performed. The adhesive-enamel interface after acid-base challenge and the surface structure after conditioner application were also observed.

RESULTS

With 10,000 TCs, there was no statistically significant difference between ME-ADU and NC-ADU. On the other hand, the µSBS of EC-ADU or KE-ADU was significantly higher than that of NC-ADU, while that of ME-SE2 was significantly lower than NC-SE2. There was no significant difference between EC-SE2, NC-SE2, and KE-SE2. Formation of an acid-base resistance zone (ABRZ) was confirmed in all groups. However, funnel-shaped erosion, which indicates interfacial defects, was observed in the NC-ADU, ME-ADU, and ME-SE2 groups.

CONCLUSION

For enamel bonding, application of EC or KE prior to ADU increased the bond strength and created a stable adhesive-enamel interface. On the other hand, SE2 also had stable shear bond strength and interface without the use of conditioners. However, ME decreased the bonding performance of SE2.

The prevalence of non-carious cervical lesions (NCCLs) with or without erosive etiological factors among adults of different ages in Tokyo

OBJECTIVES

To evaluate the prevalence of non-carious cervical lesions (NCCLs) on teeth with or without erosive etiological factors across a broad range of ages of Japanese adults.

MATERIALS AND METHODS

The study sample consisted of a total of 1108 subjects aged 15 to 89 years in Tokyo, Japan. Two examiners evaluated NCCLs and dental erosion (DE) during a full-mouth examination. Subjects were asked to complete a self-administered daily diet, habits, and health condition questionnaire. Subjects who had frequent acid consumption or gastric reflux and at least one tooth with initial enamel wear were placed in the erosion present (EP) group, and the remainder of subjects were placed in the erosion not present (EN) group. Logistic regression analyses were carried out to identify etiological factors of NCCLs associated with DE.

RESULTS

Overall prevalence of NCCLs was 60.2%; the prevalence increased with age. There were no statistical differences in the prevalence of NCCLs between the EP and EN groups, except for the 60-69 years group. Multiple logistic regression analysis showed the frequency of consumption of carbonated soft drinks, citrus juice, and acidic fruits such as oranges; tooth brushing pressure; and bruxism were associated with the presence of NCCLs.

CONCLUSION

There were no statistical differences in the prevalence of NCCLs with or without erosive etiological factors except for the 60-69 years group.

CLINICAL RELEVANCE

NCCL distribution increased with age, and erosive risk factors caused by change in dietary habits might affect the incidence of NCCLs for elders.

TRIAL REGISTRATION

UMIN000041982.

Effect of photo-thermal acceleration on in-office bleaching

The purpose is to evaluate the effect of photo-thermal acceleration on in-office bleaching efficiency using a bleaching agent without photocatalysts in vitro. Artificially discolored bovine lower incisors were prepared, and the mixed in-office bleaching material contained hydrogen peroxide 23% was applied by following treatment for 10 min: high-(HI group) and low-intensity LED lights (LI group), oven at 38 °C (OV group), and room temperature at 23 °C (RT group). Color was measured before and after bleaching and color difference (∆E*) was calculated. The data were statistically analyzed using a two-way ANOVA and Tukey’s post hoc test. The temperature change (∆T) of applied bleaching agent in HI and LI groups was measured using a thermography and was analyzed using a T test. The bleaching procedures were repeated 6 times. Irradiation in the HI group resulted in the highest ΔE, followed by the LI group whose ΔE was significantly lower. Both irradiated modes exhibited higher ΔE compared to non-irradiated OV and RT groups which were not significantly different from each other. The average temperature rise of bleaching agents in HI and LI groups after 10 min irradiation was 15.00 °C and 11.80 °C, respectively. The effect of photo-thermal acceleration was proved for an in-office bleaching agent without photocatalysts in vitro.

Evaluation of Mechanical and Physical Properties of Light and Heat Polymerized UDMA for DLP 3D Printer

The aims of this study were to investigate the feasibility of using a DLP 3D printer to fabricate a crown using scan data before tooth preparation, and to investigate the effect of additional heat curing on the mechanical properties of the urethane dimethacrylate (UDMA)-based 3D printed crown. A silicone fitting test was used to evaluate the internal adaptation of the crown. For ultimate tensile strength (UTS), the specimens were tested after 24 h storage in water at 37 °C or after 10,000 thermal cycles (TC) between 5–55 °C. For shear bond strength (SBS), a PMMA self-curing resin was filled into a Teflon ring mounted onto the polished UDMA specimens. The internal adaptation of the crowns fabricated with cement space was better than those with no cement space. There was no significant difference in UTS between light-curing and additional heat-curing groups after TC. As for the SBS, there was a significant difference after TC between the two groups. Crowns can be fabricated by a DLP 3D printer using pre-preparation scans with a cement space defined in the software. Additional heat curing of the UDMA-based crown reduced residual monomer and improved its mechanical properties.

Effect of a temporary sealing material on the bond strength of CAD/CAM inlay restorations with resin-coating technique

This study aimed to assess the effects of a temporary sealing material and cleaning method of resin-coated dentin on the bond strength of computer-aided design/computer-aided manufacturing (CAD/CAM) inlay restorations. Resin-coated dentin surfaces were unsealed or temporarily sealed for 1 h or 1 week. For the temporarily sealed group, a hydraulic temporary sealing material was removed and further divided into four groups: without cleaning, cleaned with a rotational brush, a universal cleaner or an air-polishing device. Some specimens were investigated with energy dispersive X-ray spectroscopy and the others were used for microtensile bond strength (MTBS) test. A sealing material could not be removed with a rotational brush, which resulted in pretest failures in all specimens after 1 h and which resulted in low MTBS after 1 week. An air-polishing device can clean resin-coated dentin temporarily sealed with a hydraulic temporary sealing material and resulted in the similar MTBS as in the unsealed group.

Characteristics of biofilm-induced degradation at resin-dentin interfaces using multiple combinations of adhesives and resins

OBJECTIVE

We aimed to evaluate morphological, mechanical and chemical characteristics at resin-dentin interfaces using multiple combinations of adhesives and resins after a short-term biofilm-induced degradation.

METHODS

Cervical cavities were prepared in bovine incisors, treated by Clearfil SE Bond 2 (SE) or FL-Bond II (FL), restored by Clearfil Majesty ES Flow (ES) or Beautifil Flow Plus (BFP) and grouped into SE-ES, SE-BFP, FL-ES and FL-BFP. After biofilm challenge, interfacial gaps and dentin wall lesions were examined by optical coherence tomography (OCT). Gap depth (GD), gap pattern scale (GPS) and dentin wall lesion depth (WLD) were evaluated from confocal laser scanning microscope. Microhardness of dentin lesions was measured with a Vickers microhardness tester. Chemical elements in resins and dentin wall lesions were analyzed by scanning electron microscopy and energy dispersive X-ray spectrometry (SEM/EDS). Morphological structures of interfacial gaps were observed by SEM.

RESULTS

OCT could detect adhesive-dentin-bonded and adhesive-dentin-debonded gaps. SE-containing groups showed significantly lower GPS than FL-containing groups. FL-BFP showed significantly lower WLD than FL-ES. Microhardness of dentin wall lesions was higher than that of outer lesions and they showed significant differences in FL-BFP. SE-BFP showed a lower GPS curve and higher intensities of Ca and P in the upper half of dentin wall lesions than other groups. From SEM, microgaps between filler and matrix, break and loss of matrix, separation of adhesive matrix with hybrid layer occurred at interfacial gaps.

SIGNIFICANCE

The morphological, mechanical and chemical characteristics of resin-dentin interfacial degradation depend on the component and chemistry of restorative materials.

Effect of Air-Particle Abrasion Protocol and Primer on The Topography and Bond Strength of a High-Translucent Zirconia Ceramic

PURPOSE

To evaluate effect of air-particle abrasion protocol and primer on surface topography and bond strength of resin cement to high-translucent zirconia ceramics.

MATERIALS AND METHODS

Two hundred disk-shaped high-translucent zirconia specimens of 5Y-PSZ were prepared. The specimens were assigned to 5 groups in terms of particle type and air-particle abrasion pressure: (1) control, (2) alumina with 0.2 MPa-air pressure [AB-0.2], (3) alumina with 0.4 MPa-air pressure [AB-0.4], (4) glass beads with 0.2 MPa-air pressure [GB-0.2], and (5) glass beads with 0.4 MPa-air pressure [GB-0.4]. Two different primers 1% MDP (Experimental) and MDP-silane primer (Clearfil Ceramic Primer Plus) was also tested. Stainless steel rods were bonded to the 5Y-PSZ specimens with PANAVIA V5. For each group, the tensile bond strength (TBS) was measured after 24-hour water storage (n = 10) and after 5000 thermal-cycling (n = 10) at crosshead speed of 2 mm/min. The data were statistically analyzed using Weibull analysis. Surface roughness (Sa) was measured using a 3D-Laser Scanning Confocal Microscope (n = 5) and analyzed by t-test with Bonferroni correction. Surface topography using scanning electron microscopy (SEM) and surface elemental analysis using energy dispersion spectroscopy (EDX), and cross-section SEM at the interface with composite cement were also investigated.

RESULTS

In MDP-silane groups, the highest TBS was observed in AB-0.4 after 24 hours and GB-0.4 after thermal-cycling (p < 0.05). In MDP groups, AB groups resulted in the significantly higher TBS than GB groups (p < 0.05). AB-0.4 group showed the highest Sa value compared to all groups (p < 0.005), meanwhile GB groups did not show different Sa compared to control (p > 0.005).

CONCLUSION

Air-abrasion with different particle and blasting pressure can improve bonding to zirconia with proper primer selection. Particularly, glass beads abrasion followed by MDP-silane primer and alumina abrasion followed by MDP primer alone provided stable bond strength of resin cement to high-translucent zirconia after aging. High-translucent zirconia abraded with glass beads achieves a desirable bonding performance without creating surface microcracks which may hinder zirconia's mechanical properties.

The effect of different ceramic surface treatments on the repair bond strength of resin composite to lithium disilicate ceramic

This study aimed to evaluate the bonding abilities and long-term durability of different repair agents when applied to lithium disilicate ceramics (LDS). Blocks of IPS e.max CAD were prepared and divided into four groups according to the surface treatment: Monobond Etch & Prime (ME), K-etchant GEL+Clearfil Universal Bond (UB), Bondmer Lightless (BL), and K-etchant GEL+G-Multi Primer (GMP). All treated ceramic specimens were bonded to resin composite and light-cured. The micro-shear bond strength was measured after 24 h of water storage or 5,000 thermocycles. ME and BL showed significantly higher initial bond strengths than UB and GMP (p<0.05). After 5,000 thermocycles, there was no significant difference in ME (p>0.05), but BL and GMP showed considerable reduction in bond strength (p<0.05); moreover, the samples of UB were all de-bonded before testing. ME and BL proved to be effective surface treatment materials for LDS.

Color adjustment potential of single-shade resin composite to various-shade human teeth: Effect of structural color phenomenon

This study evaluated the effect of the structural color phenomenon in resin composites (RCs) on the color adjustment of restorations by investgating their color reproduction performance in human incisors of various shade. Cervical cavities were filled with a single-shade RC with 260 nm spherical fillers (Omnichroma (OMN)), conventional A2-shade RCs (Estelite Σ Quick or Clearfil AP-X), or experimental RCs with 5-50 nm fumed silica fillers (R1) and 100 nm spherical fillers (R2). Color parameters (L*C*h*) were measured using a CIE XYZ camera along the centerline of the restorations, and the color difference (∆E₀₀) between corresponding areas of intact and restored teeth was calculated. Additionally, the reflectance spectra of OMN, R1, and R2 were investigated. OMN exhibited significantly lower ∆E₀₀ than other tested RCs (p<0.05) and its reflection spectrum ranged from blue to red, while a blue peak was observed with R1 and R2, indicating a higher color adjustment potential of OMN.

Influence of primer contamination on the bonding interface of enamel pre-etched with phosphoric acid

In this study, the influence of primer contamination on enamel bonding was analyzed. Adper Scotchbond Multi-Purpose (SMP), CLEARFIL SE Bond 2 (SE2), Scotchbond Universal (SBU) Adhesive, and Scotchbond Etchant (35% phosphoric acid; PA) were used. Ground bovine enamels were divided into eight groups based on the bonding protocols. The bonding interfaces after an acid-base challenge were observed via scanning electron microscopy to determine the acid-base resistant zone (ABRZ). Moreover, the bonding interfaces after the nanoleakage challenge were analyzed via energy-dispersive X-ray spectroscopy. ABRZ was observed in all the samples except PA_ONLY (applied PA etching, No primer and No adhesive resin). The funnel-shaped erosion was detected only in X_SBU (applied SBU without PA etching). The nanoleakage test revealed silver patterns in some groups. The nanoleakage, i.e., the penetration of the silver ions, was detected in the groups wherein primer was applied on PA-pre-etched enamel.

The effect of reduced glutathione on the toxicity of silver diamine fluoride in rat pulpal cells

Introduction

Due to its ability to arrest untreated dental caries, silver diamine fluoride (SDF) has been advocated for indirect pulp capping procedures. However, the high concentrations of silver and fluoride in SDF raise concerns about its biocompatibility to pulpal tissues.

Objectives

This study aimed to investigate the effect of SDF on the viability, alkaline phosphatase (ALP) activity, and morphology of pulpal-like cells (RPC-C2A) and to evaluate the influence of reduced glutathione (GSH) on SDF-induced cytotoxicity and deposit formation on dentin.

Methodology

The cytotoxicity of diluted 38% SDF solutions (10-4 and 10-5), with or without the addition of 5 mM or 50 mM GSH, was evaluated at 6 and 24 hours. Cell viability was detected using WST-8 and the effect on ALP activity was performed using an ALP assay kit. Cell morphology was observed using a phase-contrast microscope. Scanning electron microscopy analysis was conducted to evaluate the effect of GSH incorporation or conditioning on SDF-induced deposit formation on dentin discs. Cytotoxicity data were analyzed by two-way analysis of variance (ANOVA) and Tukey post hoc tests (p<0.05).

Results

There were significant differences between the groups. The results demonstrated that all tested SDF dilutions caused a remarkable cytotoxic effect, while the addition of GSH prevented SDF-induced damage at 6-hour exposure time in the higher dilution of SDF. Dentin treated with plain SDF or GSH-incorporated SDF solution showed deposit formation with occluded dentinal tubules, unlike the other groups.

Conclusion

SDF severely disturbed the viability, mineralization-ability, and morphology of pulpal-like cells, while controlled concentrations of GSH had a short-term protective effect against SDF-induced damage. GSH showed an inhibitory effect on SDF-induced dentinal deposit formation. Further research is warranted to evaluate the effect of GSH on caries-arresting, anti-hypersensitivity, and antibacterial functions of SDF.

Deproteinization of caries-affected dentin with chemo-mechanical caries removal agents and its effect on dentin bonding with self-etch adhesives

OBJECTIVES

To evaluate the micro-tensile bond strength (μTBS) of self-etch adhesives (SEA) to normal and caries-affected dentin after smear layer deproteinization with papain enzyme-based and NaOCl-based chemo-mechanical caries removal agents (CRAs) and to compare their efficacy to a 6 % NaOCl solution.

METHODS

Forty extracted human molars with occlusal carious lesions were randomly divided into four pretreatment groups: no treatment (control), Papacarie for 60 s, Carisolv for 60 s, and 6 % NaOCl for 15 s. After pretreatment, Universal Bond Quick ER (UBQ, one-step, 1-SEA) or Clearfil SE Bond 2 (CSE, two-step, 2-SEA) was applied to the pre-treated surface, and built-up with resin composite (Clearfil AP-X). The μTBS test was performed after 24 h water storage of the specimens at 37 °C, and the modes of failure were determined under SEM. Deproteinizing effects of the tested agents on smear layer-covered dentin was quantified by changes in the amide:phosphate ratio using attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) analysis.

RESULTS

On caries-affected dentin the μTBS improved significantly after pretreatment with Papacarie, Carisolv, and 6 % NaOCl with both SEAs (p < 0.05). Papacarie pretreatment significantly improved the μTBS of UBQ on normal dentin compared to NaOCl pretreatment (p < 0.05). ATR-FTIR revealed that all agents significantly decreased the amide:phosphate ratio on the smear layer-covered normal and caries-affected dentin (p < 0.05).

CONCLUSIONS

Smear layer deproteinizing with papain enzyme-based and NaOCl-based gel CRAs was effective in improving the micro-tensile bond strength of self-etch adhesives to caries-affected dentin.

CLINICAL SIGNIFICANCE

Smear layer deproteinization with Papacarie (a papain enzyme-based gel) or Carisolv (a NaOCl-based gel) can improve the μTBS to normal and caries-affected dentin bonded with 2-step self-etch adhesives.