Upper Limb Disorders in Catering Workers

BACKGROUND

The literature reports that catering workers are exposed to various occupational health hazardsé.

OBJECTIVE

This study aims to assess a cohort of catering workers in relation to upper limb disorders, thus contributing to the quantification of work-related musculoskeletal disorders in this occupational sector.

METHODS

Here, 500 employees, of which 130 were males and 370 were females, with an overall mean age of 50.7 years and an average length of service of 24.8 years, were examined. All subjects completed a standardized questionnaire: the medical history questionnaire of diseases of the upper limbs and spine proposed in "Health surveillance of workers", third edition, EPC.

RESULTS

The obtained data enables the following conclusions to be drawn. Musculoskeletal disorders affect a wide range of catering workers. The most affected anatomical region is the shoulder. These disorders increase with advancing age, specifically shoulder, wrist/hand disorders and daytime and nighttime paresthesias. Employment seniority in the catering sector increases the likelihood of all considered conditions. An increase in weekly workload exclusively affects the shoulder region.

CONCLUSIONS

This study aims to serve as an impetus for further research that seeks to better analyze musculoskeletal problems in the catering sector.

Evaluation of the Efficacy of a Lift-Assist Device Regarding Caregiver Posture and Muscle Load for Transferring Tasks

The aim of this study was to confirm the effect of a lift-assist device when performing a patient-lifting task. Ten working caregivers participated in this experiment, and lifting patients from bed to wheelchair (B2C) and wheelchair to bed (C2B) was performed for manual care (MC) and lift-assist device (robot) care (RC). EMG sensors and IMU motion sensors were attached as indicators of the assistive device's effectiveness. EMG was attached to the right side of eight muscles (UT, MD, TB, BB, ES, RF, VA, and TA), and flexion/extension angles of the neck, shoulder, back, and knee were collected using motion sensors. As a result of the analysis, both B2C and C2B showed higher muscle activities in MC than RC. When using a lift-assist device to lift patients, the RC method showed reductions in muscle activities compared to MC. As a result of the work-posture analysis, both the task type and the task phase exhibited pronounced reductions in shoulder, back, and knee ROM (range of motion) compared to those of MC. Therefore, based on the findings of this study, a lift-assist device is recommended for reducing the physical workloads of caregivers while performing patient-lifting tasks.

Prevalence and determinants of (work-related) musculoskeletal disorders among dentists - A cross sectional evaluative study

Background

Work-related musculoskeletal disorders (WMSDs) are the second most common cause of disability, accounting for 17% of all Years lived with a disability (YLDs) worldwide. Healthcare professionals, especially dentists, are known to be at a higher risk of WMSDs. Therefore, this study aims to determine the point and period prevalence of WMSDs among dentists and to assess the risk factors for WMSDs, including workstation analysis.

Methods

This cross-sectional study was conducted among 120 dentists from three dental colleges in Gujarat (Ahmedabad and Gandhinagar), India. A structured questionnaire was used to collect sociodemographic and occupational history along with pre-validated standardized tools such as the Nordic Musculoskeletal Questionnaire (NMQ), Rapid Entire Body Assessment (REBA) score sheet and Quick Exposure Checklist (QEC). Data analysis was performed using SPSS version 20.

Results

The period prevalence of MSDs and WMSDs were 85% and 75.8% respectively, and the point prevalence was 39.2% and 23.3% respectively. Prosthodontists reported the highest prevalence of WMSDs. The neck (64.7%) was the most commonly affected area. A statistically significant result was obtained between MSDs and BMI (P = 0.02), qualification (P = 0.01) and between WMSDs and duration of work in the sitting posture (P = 0.03).

Conclusions

The prevalence of both MSDs and WMSDs was found to be high. Dentists with higher BMI, higher qualifications, lack of breaks, having poor workstations and higher REBA and QEC scores, whose job tasks involve continuous inspection, frequent bending of elbow joints, frequent repetitive motions, tasks that require them to reach distances greater than 20 inches and tasks that involve twisting of the waist are at a higher risk of developing MSDs.

Hand-arm vibration syndrome among harvesting farmers: A cross-sectional study from Pakistan

BACKGROUND

Constant use of hand-held vibratory tools may cause health issues, including hand dysfunction, among farmers. Thus, exposure to these vibratory instruments may cause hand-arm vibration syndrome (HAVS).

OBJECTIVE

The study aimed to measure the prevalence of HAVS and evaluate neurological and vascular symptoms among farmers.

METHODS

This cross-sectional study included 20 villages in Pakistan and used a three-part questionnaire to collect data from farmers exposed to vibration while farming. The study included demographics, the Health Surveillance Questionnaire, and the Stockholm Workshop Classification Scale. SPSS version 22 was used for the data entry and statistical analysis.

RESULTS

433 (43%) participants had musculoskeletal discomfort and 568 (57%) had hand vibration. Raynaud phenomenon was evident in 430 (43%) participants, whereas carpal tunnel syndrome was found in 218 (22%). Tingling was reported by 255 participants (26%), and numbness was reported by 543 (54%). According to the grading of neurological symptoms, 461 (46%) participants were exposed to vibration but did not experience any symptoms, placing them in stage 0. 185 (18.5%) participants with HAVS with infrequent episodes affecting just the tips of one or more fingers were categorized in stage 01 based on grading of vascular symptoms.

CONCLUSION

HAVS are common among harvesting farmers, with the most noticeable vibrations occurring in the shoulder region. Similarly, most farmers had no vascular symptoms, and most were exposed to vibration but had no neurological symptoms.

Automated and Continuous Fatigue Monitoring in Construction Workers Using Forearm EMG and IMU Wearable Sensors and Recurrent Neural Network

About 40% of the US construction workforce experiences high-level fatigue, which leads to poor judgment, increased risk of injuries, a decrease in productivity, and a lower quality of work. Therefore, it is essential to monitor fatigue to reduce its adverse effects and prevent long-term health problems. However, since fatigue demonstrates itself in several complex processes, there is no single standard measurement method for fatigue detection. This study aims to develop a system for continuous workers' fatigue monitoring by predicting the aerobic fatigue threshold (AFT) using forearm muscle activity and motion data. The proposed system consists of five modules: Data acquisition, activity recognition, oxygen uptake prediction, maximum aerobic capacity (MAC) estimation, and continuous AFT monitoring. The proposed system was evaluated on the participants performing fourteen scaffold-building activities. The results show that the AFT features have achieved a higher accuracy of 92.31% in assessing the workers' fatigue level compared to heart rate (51.28%) and percentage heart rate reserve (50.43%) features. Moreover, the overall performance of the proposed system on unseen data using average two-min AFT features was 76.74%. The study validates the feasibility of using forearm muscle activity and motion data to workers' fatigue levels continuously.

Wearable Sensors and Artificial Intelligence for Physical Ergonomics: A Systematic Review of Literature

Physical ergonomics has established itself as a valid strategy for monitoring potential disorders related, for example, to working activities. Recently, in the field of physical ergonomics, several studies have also shown potential for improvement in experimental methods of ergonomic analysis, through the combined use of artificial intelligence, and wearable sensors. In this regard, this review intends to provide a first account of the investigations carried out using these combined methods, considering the period up to 2021. The method that combines the information obtained on the worker through physical sensors (IMU, accelerometer, gyroscope, etc.) or biopotential sensors (EMG, EEG, EKG/ECG), with the analysis through artificial intelligence systems (machine learning or deep learning), offers interesting perspectives from both diagnostic, prognostic, and preventive points of view. In particular, the signals, obtained from wearable sensors for the recognition and categorization of the postural and biomechanical load of the worker, can be processed to formulate interesting algorithms for applications in the preventive field (especially with respect to musculoskeletal disorders), and with high statistical power. For Ergonomics, but also for Occupational Medicine, these applications improve the knowledge of the limits of the human organism, helping in the definition of sustainability thresholds, and in the ergonomic design of environments, tools, and work organization. The growth prospects for this research area are the refinement of the procedures for the detection and processing of signals; the expansion of the study to assisted working methods (assistive robots, exoskeletons), and to categories of workers suffering from pathologies or disabilities; as well as the development of risk assessment systems that exceed those currently used in ergonomics in precision and agility.

Work-Related Musculoskeletal Disorders among Dentists in the United Arab Emirates: A Cross-Sectional Study

Background and Objectives: A dental environment possesses a serious ergonomic health issue on the dental team members which in turn contributes to the development of work-related musculoskeletal disorders (WMSDs). The present research is aimed at evaluating the frequency of musculoskeletal disorders and their associated sociodemographic and work environment risk factors among dentists in the United Arab Emirates. Material and Methods: In this cross-sectional study, a pretested and validated questionnaire was sent via email as well as on different social media platforms to a total of 497 dentists. A total of 179 dentists completed the study survey, with a total response rate of 36%. A binary logistic regression model was conducted to identify significant risk factors associated with WMSDs. Results: Dentists in the United Arab Emirates experience a high prevalence of work-related musculoskeletal disorders (90.4%) which were associated with high levels of stress in the work environment. Furthermore, dentists in the private sector worked more clinical hours per day (p = 0.000) and had more financial stress (p = 0.007) as compared to those in the governmental sector. Gender (p = 0.007), age (p = 0.01), monthly income (p = 0.073), work experience (p = 0.037), number of patients treated per day (p = 0.049), and the use of an ergonomic dental chair (p = 0.005) were all factors associated with a greater number of affected body regions by WMSDs. Multivariate binary logistic regression for the number of regions affected by WMSDs revealed that not using an ergonomic dental chair (OR 2.70, 95% CI, 1.14-6.36) and high stress in the work environment (OR 1.31, 95% CI 1.02 to1.67) were associated with more body regions being affected by WMSDs. Conclusions: This study highlights the high prevalence rate of WMSDs among dentists in the UAE. Future research should be directed towards reducing stress in the work environment, increasing awareness regarding the importance of an ergonomic dental chair, and reducing gaps between private and governmental practices.

Industrial exoskeletons from bench to field: Human-machine interface and user experience in occupational settings and tasks

Objective

Work-related musculoskeletal disorders (WRMSDs) are considered nowadays the most serious issue in the Occupational Health and Safety field and industrial exoskeletons appear to be a new approach to addressing this medical burden. A systematic review has been carried out to analyze the real-life data of the application of exoskeletons in work settings considering the subjective responses of workers.

Methods

The review was registered on PROSPERO. The literature search and its report have been performed following the PRISMA guidelines. A comprehensive literature search was performed in PubMed, EMBASE, Web of Science, and Scopus.

Results

Twenty-four original studies were included in the literature review; 42% of the papers retrieved included automobilist industry workers, 17% of the studies evaluated the use of exoskeletons in logistic facilities, and 17% of articles involved healthcare. The remaining six papers recruited farmers, plasterers, wasting collectors, construction workers, and other workmen. All the papers selected tested the use of passive exoskeletons, supporting upper arms or back. Usability, perceived comfort, perceived exertion and fatigue, acceptability and intention to use, occupational safety and health, and job performance and productivity were the main topic analyzed.

Conclusion

Exoskeletons are not a fix-all technology, neither for workers nor for job tasks; they tend to show more of their potential in static activities, while in dynamic tasks, they can obstacle regular job performance. Comfort and easiness of use are the key factors influencing the user's experience. More research is needed to determine the most effective and safe ways to implement exoskeleton use in occupational settings.

Systematic review registration

https://www.crd.york.ac.uk/prospero/display_record.php?RecordID=275728, identifier CRD42021275728.

Comparisons of Trunk Motions and Low Back Injury Risk between Alternative Hotel Room Cleaning Methods

Hotel room cleaners frequently report job-related pain, with high rates of work-related musculoskeletal disorder injuries established for this group of workers. Surprisingly, there is limited published research documenting the impact of interventions to reduce ergonomic-related injury risks specific to hotel room cleaners' job tasks. In this study focused on hotel bathroom-cleaning and furniture-dusting tasks, twelve experienced hotel room cleaners used their standard method and a risk-reduction method-a tool with a handle that could extend, to perform these tasks. The female study participants' average age was 45.3 (SD 8.7) years with an average of 10 years of work experience as cleaners (range: 0.8-26.0 years). Trunk kinematics and a low back injury risk assessment were measured using the Lumbar Motion Monitor. All study metrics were significantly reduced when cleaning tasks involved use of adjustable, long-handled tools (p < 0.05). This study demonstrated that commonly available cleaning and dusting tools with extendable handles can significantly reduce low back injury risk among hotel room cleaners and potentially reduce injury risk to other body parts known to be the site of musculoskeletal disorders in this workforce. The study findings suggest that cleaning or housekeeping jobs in other industries where these same tasks are performed could benefit from use of extended-handle tools like those investigated here.

Multi-Site Musculoskeletal Symptoms in the Electronics Manufacturing Industry in China: A Cross-Sectional Study

BACKGROUND

With the development of the electronics manufacturing industry, the demand for human resources has increased, which has also led to the frequent occurrence of multi-site work-related musculoskeletal disorders.

METHOD

The participants (n = 7307) were recruited from 30 enterprises in China in 2018. The prevalence of musculoskeletal disorders was estimated using a modified Chinese version of the Musculoskeletal Disorders Questionnaire. The multivariate logistic regression model was applied to evaluate the effects of risk factors on multi-site musculoskeletal symptoms. Additionally, the log-binomial model was established to examine the correlation between the various sites of musculoskeletal symptoms in the body.

RESULTS

The 12-month prevalence of musculoskeletal symptoms among participants was 40.6%. The proportion of musculoskeletal symptoms involving single-site and 2/>2 body sites were 11.6% and 29.0%, respectively. The results of logistic regression showed that female adults who smoked, had >5-year job tenure, and always stood or sat for long period at work had a higher risk in 2/>2 body sites of musculoskeletal symptoms (p < 0.05). However, physical exercise during leisure time and "Squatting or kneeling for long period at work" were more frequently protective factors. Furthermore, the log-binomial model indicated that the neck and shoulder were significantly related to each other (Prevalence Ratio, PR: 5.511 and 7.017).

CONCLUSIONS

Several demographic characteristics and work-related factors were associated with multi-site musculoskeletal symptoms in the electronics manufacturing industry in China. Improving the levels of physical exercise and reducing posture problems and force loads may help to promote the health of workers.

Relationship between Wearing a Lead Apron and Work-related Musculoskeletal Disorders: A Questionnaire Survey of Japanese Radiological Technologists

The purpose of this study was to conduct a self-reported questionnaire survey of work-related musculoskeletal disorders (WMSDs) among Japanese radiological technologists (RTs) and to report on the relationship between wearing a lead apron and WMSDs. Between February and April of 2021, RTs in Okayama Prefecture, Japan, were surveyed by mail and through a website. Information on individual characteristics, physical factors at work, and the presence of WMSDs were collected. All participants were also asked whether they frequently wore lead aprons. A multiple logistic regression analysis was used to assess the relationship between wearing a lead apron and WMSDs. The model was adjusted for age, sex, body mass index (BMI), and working hours. Of the 123 participants, 67 (54.5%) had WMSDs. Multiple logistic regression analysis revealed that WMSDs were significantly associated with wearing a lead apron. Compared to the "Never wear" group, the odds ratios for the "Always/Frequently wear" and "Sometimes/Rarely wear" groups were 7.87 (95% confidence interval [CI]=1.28-48.46; p=0.026) and 7.80 (95% CI=1.43-42.44; p=0.017), respectively. Our analysis suggests that wearing a lead apron is associated with WMSDs, and thus design modifications in lead aprons may improve the occupational health management of RTs.

Automatic Ergonomic Risk Assessment Using a Variational Deep Network Architecture

Ergonomic risk assessment is vital for identifying work-related human postures that can be detrimental to the health of a worker. Traditionally, ergonomic risks are reported by human experts through time-consuming and error-prone procedures; however, automatic algorithmic methods have recently started to emerge. To further facilitate the automatic ergonomic risk assessment, this paper proposes a novel variational deep learning architecture to estimate the ergonomic risk of any work-related task by utilizing the Rapid Entire Body Assessment (REBA) framework. The proposed method relies on the processing of RGB images and the extraction of 3D skeletal information that is then fed to a novel deep network for accurate and robust estimation of REBA scores for both individual body parts and the entire body. Through a variational approach, the proposed method processes the skeletal information to construct a descriptive skeletal latent space that can accurately model human postures. Moreover, the proposed method distills knowledge from ground truth ergonomic risk scores and leverages it to further enhance the discrimination ability of the skeletal latent space, leading to improved accuracy. Experiments on two well-known datasets (i.e., University of Washington Indoor Object Manipulation (UW-IOM) and Technische Universität München (TUM) Kitchen) validate the ability of the proposed method to achieve accurate results, overcoming current state-of-the-art methods.

Manual Therapy Facilitates Homeostatic Adaptation to Bone Microstructural Declines Induced by a Rat Model of Repetitive Forceful Task

The effectiveness of manual therapy in reducing the catabolic effects of performing repetitive intensive force tasks on bones has not been reported. We examined if manual therapy could reduce radial bone microstructural declines in adult female Sprague–Dawley rats performing a 12-week high-repetition and high-force task, with or without simultaneous manual therapy to forelimbs. Additional rats were provided 6 weeks of rest after task cessation, with or without manual therapy. The control rats were untreated or received manual therapy for 12 weeks. The untreated TASK rats showed increased catabolic indices in the radius (decreased trabecular bone volume and numbers, increased osteoclasts in these trabeculae, and mid-diaphyseal cortical bone thinning) and increased serum CTX-1, TNF-α, and muscle macrophages. In contrast, the TASK rats receiving manual therapy showed increased radial bone anabolism (increased trabecular bone volume and osteoblast numbers, decreased osteoclast numbers, and increased mid-diaphyseal total area and periosteal perimeter) and increased serum TNF-α and muscle macrophages. Rest, with or without manual therapy, improved the trabecular thickness and mid-diaphyseal cortical bone attributes but not the mineral density. Thus, preventive manual therapy reduced the net radial bone catabolism by increasing osteogenesis, while rest, with or without manual therapy, was less effective.

Exploratory Field Testing of Passive Exoskeletons in Several Manufacturing Environments: Perceived Usability and User Acceptance

OCCUPATIONAL APPLICATIONSResults of the current exploratory study suggest that use of an exoskeleton (EXO) has the potential to be accepted by workers as an intervention in diverse manufacturing environments. Also evident were that the major factors contributing to EXO-use-intention are perceived comfort, task-technology fit, perceived safety, and perceived usefulness. A user's perception of perceived usability may be established by using an exoskeleton during actual job tasks, yet some aspects of perceived usability likely require multiple exposures to an EXO for an accurate assessment. Many negative comments regarding EXO use were related to physical constraints (e.g., restricted movements, bulkiness), and to the EXO interface (e.g., straps, cuff designs), suggesting a need for further research on EXO design to minimize discomfort. In practice, there is likely value in having workers use and explore candidate EXOs during their actual job, both to accurately assess the usefulness of an EXO and to find the most effective EXO.

Evaluating the Current State of Ergonomics Education Offered to Students in US Medical Students

BACKGROUND

The high rate of work-related musculoskeletal disorders (WMSD) among surgeons is well-documented and found to factor into medical students' interest in surgical specialties. Ergonomic techniques can reduce musculoskeletal pain in surgeons. Access to ergonomics education in residency is minimal and the ergonomics education offered in medical school has not been characterized.

METHODS

An anonymous, online survey was distributed to 210 administrators in medical education and curriculum at all accredited US allopathic medical schools. They were asked about their knowledge of ergonomics, assessment of potential benefits of ergonomics education to their students, and the ergonomics education offered at their institution.

RESULTS

A total of 71 surveys were completed (33.8% response rate). 82% of schools reported familiarity with the study of ergonomics and 81% thought it would be beneficial to the future careers of their students to receive ergonomics education. Respondents estimated 43% of surgeons experience WMSDs and those that did not think ergonomics education would be beneficial to their students' future careers had a statistically significantly lower estimate of WMSD burden amongst practicing surgeons. Only one respondent reported that students at their institution receive greater than three hours of ergonomics education, while 98% reported their students will receive less than three hours. Considering this, 81% of respondents reported that students do have access to other resources that encourage ergonomic practices, such as gym access, yoga classes, and surgical simulation labs.

DISCUSSION

Medical schools should increase access to ergonomics education and integrate it into their curriculum as early as possible.

Evaluation of a New Simplified Inertial Sensor Method against Electrogoniometer for Measuring Wrist Motion in Occupational Studies

Wrist velocity is an important risk factor for work-related musculoskeletal disorders in the elbow/hand, which is also difficult to assess by observation or self-reports. This study aimed to evaluate a new convenient and low-cost inertial measurement unit (IMU)-based method using gyroscope signals against an electrogoniometer for measuring wrist flexion velocity. Twelve participants performed standard wrist movements and simulated work tasks while equipped with both systems. Two computational algorithms for the IMU-based system, i.e., IMU_norm and IMU_flex, were used. For wrist flexion/extension, the mean absolute errors (MAEs) of median wrist flexion velocity compared to the goniometer were <10.1°/s for IMU_norm and <4.1°/s for IMU_flex. During wrist deviation and pronation/supination, all methods showed errors, where the IMU_norm method had the largest overestimations. For simulated work tasks, the IMU_flex method had small bias and better accuracy than the IMU_norm method compared to the goniometer, with the MAEs of median wrist flexion velocity <5.8°/s. The results suggest that the IMU-based method can be considered as a convenient method to assess wrist motion for occupational studies or ergonomic evaluations for the design of workstations and tools by both researchers and practitioners, and the IMU_flex method is preferred. Future studies need to examine algorithms to further improve the accuracy of the IMU-based method in tasks of larger variations, as well as easy calibration procedures.

Work-related Musculoskeletal Disorders and Quality of Life Among Staff Nurses in a Tertiary Care Hospital of Bangalore

BACKGROUND

Work-related musculoskeletal disorder (WMSD) is a collective and descriptive term used for the symptoms caused or aggravated by work. Significant WMSDs can affect the productivity and Quality of Life (QOL) of nurses. This study was undertaken to estimate the prevalence of WMSDs, identify their risk factors, and find the association, if any. This study also assessed the quality of life of nurses and its association with WMSDs.

METHODS

This cross-sectional study was conducted among 207 staff nurses at a tertiary care hospital in Bangalore for a period of 7 months (June-2018 to Dec-2018). The nurses were stratified based on their parent department into three broad categories - Medical, Surgical, and Operation Theatre. Stratified random sampling was followed to obtain the required number of nurses from each stratum. Data was collected using a pre-tested semi-structured questionnaire, Nordic Musculoskeletal Questionnaire (NMQ), clinical examination tests, and WHOQOL-BREF.

RESULTS

The annual prevalence of WMSDs among the study subjects using NMQ was 168 (81.2%). The prevalence of WMSDs based on clinical examination tests was 67 (32.4%). Repetitive movements at work (OR 9.3, 95% CI 3.4-25.7), working in abnormal postures for prolonged periods (OR 4.7, 95% CI 1.7-12.9), and working even when sick (OR 5.3, 95% CI 2.0-14.1) were the risk factors for WMSDs (P < 0.05). No significant association was found between reported WMSDs (according to NMQ) and QOL.

CONCLUSION

Our study found that the prevalence of WMSDs was high among the staff nurses and it did not affect their QOL significantly. Workshops and training sessions on ergonomics should be regularly conducted at the workplace to prevent WMSDs.

A method for the risk assessment of biomechanical overload in hospital physiotherapists

BACKGROUND

In physiotherapists, biomechanical overload risk assessment (RA) is particularly complex due to the tasks' variability. The present study aims to propose a new methodology, named Whole Body RA Biomechanical Overload (WB-RAMBO), to assess the risk in the activities performed by physiotherapists.

METHODS

Each type of intervention was broken down into elementary operations. The risk factors (force, repetitiveness, and incongruous postures) were recorded and evaluated for each of these. For each task, the risk level was obtained by integrating the results of multiple ergonomic methods among those proposed by the international literature. To verify and validate the obtained results, we reviewed the medical records of health surveillance carried out on physiotherapists.

RESULTS

From the ergonomic point of view, RA shows a situation of acceptability. The observed slight dysergonomies are diluted in the work shift and allow an optimal functional recovery of the musculoskeletal system.

CONCLUSIONS

This method proposes a RA for each operation performed. A work plan subjected to such a peculiar RA can be redesigned and adapted to the company's and the hypersusceptible worker's organizational needs.

Evaluation of work ability index and its association with job stress and musculoskeletal disorders among midwives during the Covid-19 pandemic

BACKGROUND

Musculoskeletal disorders (MSDs) and work-related stress are among the factors that can negatively affect work ability. Given the importance of midwives' health, this study aims to evaluate the work ability of midwives and to investigate its association with the prevalence of MSDs and work-related stress in midwifery.

METHODS

Ninety-one midwives participated in this study. Three questionnaires, including Nordic musculoskeletal questionnaire (NMQ) plus body map, Persian version of work ability index (WAI) questionnaire, and Health and Safety Executive (HSE) job stress questionnaire, were used to collect data. Finally, the association of MSDs, work-related stress, and individual characteristics with WAI among midwives was investigated.

RESULTS

The highest rates of pain and discomfort were reported in the lower back and neck. The mean job stress was 116.08 with the highest scores on demand, role, and control subscales. The work ability among midwives was at an acceptable level of 39.07 on average. Inter-variable association analysis showed that the work ability was significantly associated with pain in the past 12 months and the number of coexisting MSDs. Job stress was not associated with work ability.

CONCLUSIONS

Midwives' WAI was at an acceptable level despite high prevalence of MSDs in midwives, the confirmation of the possible correlation between MSDs and work ability, as well as the high job stress in midwifery. Since the present study was conducted during the Covid-19 pandemic, the high stress in midwives may be partly due to the pandemic and may not be permanent. However, this level of stress may reduce the midwives' work ability over a long time.

Manual Therapy With Rest as a Treatment for Established Inflammation and Fibrosis in a Rat Model of Repetitive Strain Injury

Background: Repetitive strain injuries caused by repetitive occupational work are difficult to prevent for multiple reasons. Therefore, we examined the effectiveness of manual therapy (MT) with rest to treat the inflammation and fibrosis that develops through the performance of a repetitive task. We hypothesized that this treatment would reduce task-induced sensorimotor declines and neuromuscular inflammation. Methods: Twenty-nine female Sprague-Dawley rats performed a reaching and lever-pulling task for 14weeks. All ceased performing the task at 14weeks. Ten were euthanized at this timepoint (TASK). Nine received manual therapy to their upper extremities while resting 7weeks (MTR); 10 were assigned to rest alone (REST). Ten additional food restricted rats were included that neither performed the task nor received manual therapy (FRC). Results: Confirming previous experiments, TASK rats showed behavioral changes (forepaw mechanical hypersensitivity, reduced grip strength, lowered forelimb/forepaw agility, and noxious cold temperature sensitivity), reduced median nerve conduction velocity (NCV), and pathological tissue changes (myelin degradation, increased median nerve and muscle inflammation, and collagen production). Manual therapy with rest (MTR) ameliorated cold sensitivity seen in REST rats, enhanced muscle interleukin 10 (IL-10) more than in REST rats, lead to improvement in most other measures, compared to TASK rats. REST rats showed improved grip strength, lowered nerve inflammation and degraded myelin, and lowered muscle tumor necrosis factor alpha (TNFα) and collagen I levels, compared to TASK rats, yet maintained lowered forelimb/forepaw agility and NCV, and increased neural fibrosis. Conclusion: In our model of repetitive motion disorder, manual therapy during rest had modest effects on behavioral, histological, and physiological measures, compared to rest alone. These findings stand in contrast to the robust preventive effects of manual therapy in this same model.

Ergonomics and Work-Related Musculoskeletal Disorders: Characteristics Among Female Interventionists

Interventional radiology is a procedural specialty that performs minimally invasive operations under image guidance. Currently, there are inadequate ergonomic protocols for work-related musculoskeletal disorder (WMSD) prevention in interventional radiology (IR), and there is a paucity of information discerning gender differences in WMSDs. This article reviews current literature that addresses WMSDs in female physicians practicing interventional and fluoroscopic procedures, including interventional radiology, interventional cardiology, electrophysiology, vascular surgery, orthopedic surgery, neurosurgery, and gastroenterology. We searched PubMed and EBSCOhost databases for ergonomic studies that reported female physician WMSDs in the specialties listed above. After a thorough evaluation for inclusion based on eligibility criteria, 11 studies were included. From this search, there was poor female representation, averaging 25.7% of respondents. Several characteristics identified across the studies were that women were generally shorter, wore smaller glove sizes, and were younger than their male colleagues. Seventy-two percent of female proceduralists reported WMSDs versus 46.6% of their male colleagues. Additionally, women may experience more upper extremity pain than lumbar pain, which men commonly reported. Potential contributing factors to WMSDs are the size and design of procedural tools and the possible predisposition of female physicians to experience upper extremity WMSDs while performing the same operations as men. As more women enter medicine and pursue careers in procedural fields like interventional radiology, it is essential to address these discrepancies and develop ergonomically sound solutions for women.

Why Workers Hesitate to Report Their Work-Related Musculoskeletal Symptoms: A Survey at a Korean Semiconductor Company

Underreporting work-related musculoskeletal disorders (WRMSD) has been an issue in South Korea. The purpose of this survey was to figure out how many employees of a semiconductor and liquid crystal display company in South Korea experience WRMSDs and what the possible obstacles in reporting to the company are. A survey was developed with demographic questions, perceived WRMSD symptoms, and reasons for reporting or not reporting WRMSD. The survey was distributed via the company's intranet to all employees (24,380) whose employee identification number ended with an odd number. A total of 2862 employees completed the survey and the response rate was 11.7%. A total of 55.2% of respondents had felt at least one musculoskeletal symptom during the past year. More than 40% of workers who had experienced pain or discomfort during the past year thought their symptoms were more than 50%. work-related. More than one-fourth of respondents answered that they did not report their symptoms to the company more than once. The open-ended answers for not reporting WRMSD were categorized into seven common reasons. The reasons for not reporting WRMSD in previous studies show a combination of personal, organizational, socioeconomical, and cultural factors. To encourage and manage WRMSD effectively, seven recommendations of authors are described.

Work-Related Musculoskeletal Disorders Among Hospital Midwives in Chenzhou, Hunan Province, China and Associations with Job Stress and Working Conditions

Background

Midwives have a high risk of work-related musculoskeletal disorders (WMSDs), which are the leading cause of pain and disability. However, the association between job stress and WMSDs among midwives has not been studied. The aim of this project was to specifically describe relationships between the job stress and WMSDs among a sample of hospital midwives in Chenzhou, Hunan Province, China.

Methods

We conducted a cross-sectional study among a sample of 769 eligible midwives in the city of Chenzhou in Hunan Province, China from May 2018 to January 2019. All participants completed a questionnaire regarding the presence and severity of different pain symptoms and job stress assessed by the Korean occupational stress scale.

Results

A total of 597 participants responded (77.6%), and 491 (82.2%) reported that they had experienced WMSDs at some time over a 12-month period. The most common pain site was low back (72.7%), followed by the neck (52.8%) and shoulders (42.7%). We revealed that various aspects of job stress were associated with WMSDs in the current study, namely “Owing to my workload, I always feel time pressure” (OR, 2.05; 95% CI: 1.28–3.28), “My job has become increasingly overbearing” (OR, 2.34; 95% CI: 1.46–3.77), “My work requires long lasting concentration” (OR, 3.50; 95% CI: 2.13–5.74), “I have to do various jobs simultaneously”, (OR, 3.15; 95% CI: 1.93–5.14)), “My work requires creativity” (OR, 2.15; 95% CI: 1.31–3.54), “My work requires a high level of skill or knowledge” (OR, 2.83; 95% CI: 1.67–4.80), “My supervisor is helpful in getting the job done” (OR, 0.53; 95% CI: 0.33–0.84), “I have someone who understands my difficulties at work” (OR, 0.53; 95% CI: 0.34–0.85), “Undesirable changes (ie, downsizing) will come to my job” (OR, 3.28; 95% CI: 2.01–5.77), “My company provides me with sufficient organizational support” (OR, 0.47; 95% CI: 0.29–0.74), “Departments cooperate each other without conflicts” (OR, 0.50; 95% CI: 0.32–0.80), “I am provided with the opportunity to develop my capacity” (OR, 0.57; 95% CI: 0.36–0.91) and “My company climate is authoritative and hierarchical” (OR: 3.21; 95% CI: 1.97-5.23).

Conclusion

Overall, this study suggests that job stress has an important influence on WMSDs among a sample of hospital midwives in Chenzhou, Hunan Province, China. Given the multifaceted nature of identified risk, a comprehensive approach to reduce this risk is clearly required and a job stress management program will be essential.

Landscaping Work: Work-related Musculoskeletal Problems and Ergonomic Risk Factors

Background

Work-related musculoskeletal disorders (WRMSDs) are considered one of the foremost reason of disability globally with significant economic impact due to loss of productivity. Landscaping work is considered a high-risk industry in the service sector. Landscape workers are susceptible to WRMSDs as they are exposed to high physical demands at work, and exert significant physical effort to complete daily repetitive tasks during long working hours. The aim of this study was to determine the prevalence of WRMSDs and to identify the ergonomic risk factors among landscape workers in a university setting.

Methods

This was a cross-sectional study conducted among landscape workers at a public university in Kota Kinabalu, Sabah. Interviews were conducted due to low literacy of the participants, using structured questionnaires which consist of personal characteristics, work descriptions, ergonomic risk factors, as well as self-reported WRMSD symptoms using NORDIC questionnaire. Ergonomic risk assessment (ERA) using rapid entire body assessment (REBA) was then conducted.

Results

Fifty-five of 60 landscape workers agreed to participate (92% response rate). The overall prevalence of WRMSDs among landscape workers was 85.5%. The highest prevalence involving the shoulder (65.5%), followed by neck (23.6%), wrist/hand (23.6%), and lower back (20.0%) regions based on their self-reported WRMSD symptoms over the past 12 months. Awkward posture was the risk factor identified through ergonomic risk assessment (ERA) conducted by ERA trained personnel. None of the working postures during assessment was noted to be appropriate. Although no significant difference was associated with self-reported WRMSDs, majority of the landscape workers (71%) were classified as medium ergonomic risk group using REBA, with the remaining 29% considered to be high ergonomic risk group.

Conclusion

Improvement in awareness campaigns, modification of working tools, and enhanced administrative approaches are among the control and prevention measures recommended to delay or prevent the occurrence of WRMSDs.

Work-related musculoskeletal disorders and associated risk factors among urban metropolitan hairdressers in India

Objectives

Ergonomic hazards account for a substantial proportion of work‐related diseases and injuries among hairdressers. Awkward posture during work, repetitive movements, prolonged standing, and long working periods to carry out work activities cause mechanical load on the joints and work‐related musculoskeletal disorders (WMSDs). This study investigated the musculoskeletal problems among urban hairdressers and associated risk factors.

Methods

This study investigates the prevalence of WMSDs among 768 study subjects (384 hairdressers and control subjects each) from Ahmedabad and New Delhi metropolis in India. Univariate statistical analysis was carried out along with 95% confidence interval for effect estimates.

Results

Findings reveal that the nearly half of the hairdressers suffered from knee and foot pain (49.5%), followed by lower back pain (39.8%) and upper back pain (38.8%). The neck pain and shoulder pain were reported by more than 25% hairdressers. The odds of developing neck pain (OR = 2.04; 95% CI 1.37‐3.06) and shoulder pain (OR = 1.85; 95% CI 1.25‐2.73) were significantly higher than control. The female hairdressers were more likely to experience work‐related musculoskeletal disorder (OR = 2.63; 95% CI 1.18‐5.86) than male counterparts. Hairdressers within the age of 18‐35 years had significantly higher occurrence of musculoskeletal disorders with longer duration of working hours at the workplace. Longer daily work hours (>12 hours) posed significantly higher risk (OR = 2.47; 95% CI 1.39‐4.38) of experiencing MSD for hairdressers.

Conclusion

A very large proportion of hairdressers suffered with work‐related musculoskeletal disorders. The long daily working hours and gender of the hairdresser are associated with increased risk of developing WMSDs.