The Synthesis of carbon dots//zincoxide (CDs/ZnO-H400) by using hydrothermal methods for degradation of ofloxacin antibiotics and reactive red azo dye (RR141)

The development of photocatalytic powders to remove contaminants from air solutions is an important field of research in the field of environmental conservation. CD/ZnO-H400, a heterogeneous photocatalytic production, is utilized to degrade the reactive red dye and the antibiotic ofloxacin found in wastewater. This study explains the synthesis of carbon dots (CDs) derived from coconut air and zinc oxide (ZnO) using a hydrothermal method at a temperature of 180 °C with a duration of 4 h and subsequently calcinated at a 400 °C temperature for 4 h. This shows a significant improvement in photocatalytic performance due to improved delivery efficiency at the interface. The cost-efficient use of solar energy allows the comprehensive elimination of harmful pollutants through detoxification. The removal of the contaminant takes place through the first-order reaction, with RR141 showing the highest constant rate at 0.03 min-1, while ofloxacin has a constant speed at 0.01 min-1. The photocatalytic stability is measured after five cycles. The study also tested the impact of sunlight on degradation, showing a degrading rate of 98% for RR141 and 96% for ofloxacin. This study displays a new catalyst powder synthesized from carbon dots derived from the air, coconut and ZnO, showing remarkable photoactivity to completely remove harmful dyes and antibiotics from the surrounding environment.

Highly Sensitive and Selective Acetylene CuO/ZnO Heterostructure Sensors through Electrospinning at Lean O2 Concentration for Transformer Diagnosis

Acetylene (C2H2) is a gas that can cause explosions in transformers even at low concentrations. Gas chromatography (GC) or photoacoustic spectroscopy (PAS) have been used to detect C2H2 during dissolved gas analysis (DGA), but they are not suitable for monitoring numerous transformers at substations. Even though metal oxide semiconductor (MOS) based C2H2 sensors have drawn much attention as a potential solution, existing MOS-based C2H2 sensors have low sensitivity toward C2H2 in the transformer environment (<2% O2 concentrations). This study develops high-performance C2H2 gas sensors for DGA using a heterostructure of CuO/ZnO (CZ) via the electrospinning process. Performance of various ratios of CZ composite nanofibers are compared in a transformer-like environment, and the optimal composition of CZ nanofibers for detection of C2H2 at 2% O2 concentration is proposed. The CuO:ZnO = 8:2 (CZ2) sensor achieves the highest response (Rg/Ra = 7.6 against 10 ppm of C2H2) toward low concentration of C2H2 at 200 °C with good stability (>10 h). In addition, the CZ2 sensor also shows a high selectivity (>5 times) to coexisting transformer oil gases which are H2, CH4, C2H4, C2H6, CO, and CO2. Overall, this study is the first to demonstrate a high performing DGA sensor under 2% O2 concentration that can provide a practical solution to monitoring the low concentration of C2H2 in transformers effectively.

A laser-induced zinc oxide/graphene photoelectrode for a photocurrent-polarity-switching photoelectrochemical biosensor with bipedal DNA walker amplification

A photocurrent-polarity-switching photoelectrochemical (PEC) biosensor was developed for the ultrasensitive detection of tobramycin (TOB) through bipedal DNA walker amplification with hemin-induced photocurrent-polarity-switching using a laser-induced zinc oxide/graphene (ZnO/LIG) photoelectrode. Specifically, the ZnO/LIG photoelectrode was synthesized in situ by a laser direct writing (LDW) technique. In the presence of TOB, it reacted with HP1 and HP2 and the DNA walker response was activated to form a stable hemin/G-quadruplex. Furthermore, hemin induced a polarity shift in the photocurrent signal. The developed analytical platform exhibited excellent photoelectron transport performance of ZnO/LIG, the signal amplification effect of the DNA walker strategy, and the photocurrent-polarity-switching ability of hemin. Therefore, it demonstrated satisfying photocurrent responses to the target TOB within the working range of 20 nM-1.0 μM at a low detection limit of 5.43 nM. The PEC platform exhibited good stability, reproducibility, sufficient sensitivity and high selectivity for complex experimental samples. Moreover, the photocurrent-polarity-switching PEC biosensor improved the anti-interference ability and avoided false positives or negatives.

Two-dimensional oxygen-deficient ZnO1-x nanosheet as a highly selective and sensitive fluorescence probe for ferritin detection: the electron transfer biosensor (ETBS)

Iron proteins are of great scientific interest due to their importance as an excellent biomarker for human diseases. Ferritin (Fe3+), being an iron-rich blood protein, is related to various diseases like anemia and cancer. For the first time, we have developed a highly sensitive and selective ferritin biosensor based on fluorescent oxygen-deficient zinc oxide nanosheets through hydrothermal and probe-ultrasonication combined methods. The fluorescence study showed an intense bluish-green fluorescence at λex = 370 nm, after optimization at different excitation wavelengths. In addition, the fluorescence of ZnO1-x nanosheets can be efficiently quenched due to electron transfer reactions in order to achieve quantification analysis. The limit of detection (LOD) was calculated to be 0.015 nM (7.2 ng mL-1) with high linearity (R2 = 0.9930). In addition, the real-world application of the proposed biosensor has been performed on human blood serum samples in the presence of various interfering analytes showing high selectivity and sensitivity with a regression value R2 = 0.9980 indicating the current approach is an excellent biosensor platform.

Osteogenic Potential of a Biomaterial Enriched with Osteostatin and Mesenchymal Stem Cells in Osteoporotic Rabbits

Mesoporous bioactive glasses (MBGs) of the SiO2-CaO-P2O5 system are biocompatible materials with a quick and effective in vitro and in vivo bioactive response. MBGs can be enhanced by including therapeutically active ions in their composition, by hosting osteogenic molecules within their mesopores, or by decorating their surfaces with mesenchymal stem cells (MSCs). In previous studies, our group showed that MBGs, ZnO-enriched and loaded with the osteogenic peptide osteostatin (OST), and MSCs exhibited osteogenic features under in vitro conditions. The aim of the present study was to evaluate bone repair capability after large bone defect treatment in distal femur osteoporotic rabbits using MBGs (76%SiO2-15%CaO-5%P2O5-4%ZnO (mol-%)) before and after loading with OST and MSCs from a donor rabbit. MSCs presence and/or OST in scaffolds significantly improved bone repair capacity at 6 and 12 weeks, as confirmed by variations observed in trabecular and cortical bone parameters obtained by micro-CT as well as histological analysis results. A greater effect was observed when OST and MSCs were combined. These findings may indicate the great potential for treating critical bone defects by combining MBGs with MSCs and osteogenic peptides such as OST, with good prospects for translation to clinical practice.

Reducing Gut Dissolution of Zinc Oxide Nanoparticles by Secondary Microplastics with Consequent Impacts on Barnacle Larvae

The environmental impact of sunscreen is a growing concern, yet the combined effects of its components on marine animals are poorly understood. In this study, we investigated the combined effects of sunscreen-extracted zinc oxide nanoparticles (nZnO) and microplastics (MPs) on the development of barnacle larvae, focusing on the different roles played by primary microplastics (PMPs) and secondary microplastics (SMPs) generated through the phototransformation of PMPs. Our findings revealed that a lower concentration of nZnO (50 μg/L) enhanced molting and eye development in barnacle larvae, while a higher concentration (500 μg/L) inhibited larval growth. Co-exposure to PMPs had no significant effect on larval development, whereas SMPs mitigated the impact of nZnO by restricting the in vivo transformation to ionic Zn. Accumulated SMPs reduced gut dissolution of nZnO by up to 40%, lowering gut acidity by 85% and buffering the in vivo dissolution of nZnO. We further identified a rough-surfaced Si-5 fragment in SMPs that damaged larval guts, resulting in decreased acidity. Another Si-32 resisted phototransformation and had no discernible effects. Our study presented compelling evidence of the impacts of SMPs on the bioeffect of nZnO, highlighting the complex interactions between sunscreen components and their combined effects on marine organisms.

Carbonized aerogel/ZnO-based dispersive solid phase extraction of daclatasvir and sofosbuvir from biological samples prior to liquid chromatography-tandem mass spectrometry

Daclatasvir and sofosbuvir are antiviral medications utilized in the treatment of chronic hepatitis C virus (HCV) infection. Due to their low therapeutic index, careful monitoring is necessary to ensure that the optimal dose is administered. High-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) is an exceptionally sensitive and specific technique for quantifying these drugs within biological matrices. In this study, we developed a novel dispersive solid-phase extraction method employing a carbonized bio aerogel composite with ZnO for efficient extraction of daclatasvir and sofosbuvir from exhaled breath condensate, urine, and plasma samples. The extracted analytes were subsequently subjected to analysis using HPLC-MS/MS. Optimal parameters including pH adjustment, sorbent quantity variation, and elution solvent selection were fine-tuned to achieve maximum recovery efficiency while ensuring selectivity enhancements. The developed method demonstrated broad linearity ranging between 1.2 and 200 ng/mL along with good precision (relative standard deviations ≤6.2 %) and an acceptable coefficient of determination (r2 ≥0.994). These findings establish our proposed method as suitable for reliable drug quantification in clinical samples.

Molecular Adhesion of a Pilus-Derived Peptide Involved in Pseudomonas aeruginosa Biofilm Formation on Non-Polar ZnO-Surfaces

Bacterial colonization and biofilm formation on abiotic surfaces are initiated by the adhesion of peptides and proteins. Understanding the adhesion of such peptides and proteins at a molecular level thus represents an important step toward controlling and suppressing biofilm formation on technological and medical materials. This study investigates the molecular adhesion of a pilus-derived peptide that facilitates biofilm formation of Pseudomonas aeruginosa, a multidrug-resistant opportunistic pathogen frequently encountered in healthcare settings. Single-molecule force spectroscopy (SMFS) was performed on chemically etched ZnO11 2 ‾ 0 ${\left(11\bar{2}0\right)}$ surfaces to gather insights about peptide adsorption force and its kinetics. Metal-free click chemistry for the fabrication of peptide-terminated SMFS cantilevers was performed on amine-terminated gold cantilevers and verified by X-ray photoelectron spectroscopy (XPS) and polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS). Atomic force microscopy (AFM) and XPS analyses reveal stable topographies and surface chemistries of the substrates that are not affected by SMFS. Rupture events described by the worm-like chain model (WLC) up to 600 pN were detected for the non-polar ZnO surfaces. The dissociation barrier energy at zero force ΔG(0), the transition state distance xb and bound-unbound dissociation rate at zero force koff (0) for the single crystalline substrate indicate that coordination and hydrogen bonds dominate the peptide/surface interaction.

Comprehensive Study on the Age-Strengthened Mg-Zn-Mn-Ca/ZnO Composites for Fracture Fixation: Microstructure, Mechanical, and In Vitro Biocompatibility Evaluation

The present work investigates the use of age-strengthened Mg-Zn-Mn-Ca/xZnO as resorbable materials in temporary orthopedic implants. Quaternary Mg-Zn-Mn-Ca alloy, reinforced with zinc oxide particles, was stir-cast, followed by solution treatment and a range of aging treatments. Optical and electron microscopy, mechanical, electrochemical, immersion, and dynamic mechanical testing, with biocompatibility assessment were carried out. The observed 2θ shift in the (101) peaks of ZMX611/ZnO-ST and ZMX611/ZnO-H indicated lattice shrinkage. The formation of Mg7Zn3 and Ca2Mg6Zn3 in the grain boundary compositions was observed. ZMX611/ZnO-ST had a smaller β-phase fraction, indicating a finer microstructure. ZMX611/ZnO-H had the highest tensile yield strength (102.97 ± 3.92 MPa), and ZMX611/ZnO-ST showed the highest ultimate tensile strength (127.21 ± 7.48 MPa), indicating precipitation hardening of Zn enrichment. The uniformly dispersed secondary phases played a dual role in corrosion behavior. ZMX611/ZnO-ST showed a better cytocompatibility response among all samples. Composite materials exhibited satisfactory biocompatibility and mechanical compatibility as indicated by in silico results of deviatoric strain-based mechanical stimuli at the fracture interface.

Green Synthesis of Er-Doped ZnO Nanoparticles: An Investigation on the Methylene Blue, Eosin, and Ibuprofen Removal by Photodegradation

We present a study on the green synthesis of undoped and Er-doped ZnO compounds using Mangifera indica gum (MI). A set of tests were conducted to assess the structure of the material. The tests included X-ray diffraction, Raman, and Fourier-transform infrared spectroscopy. Optical properties were studied using diffuse reflectance and photoluminescence. Morphological and textural investigations were done using SEM images and N2 adsorption/desorption. Furthermore, photocatalytic tests were performed with methylene blue (MB), yellow eosin (EY), and the pharmaceutical drug ibuprofen (IBU) under UV irradiation. The study demonstrated that replacing the stabilizing agent with Mangifera indica gum is an effective method for obtaining ZnO nanoparticles. Additionally, the energy gap of the nanoparticles exhibits a slight reduction in value. Photoluminescence studies showed the presence of zinc vacancies and other defects in both samples. In the photocatalytic test, the sample containing Er3+ exhibited a degradation of 99.7% for methylene blue, 81.2% for yellow eosin, and 52.3% for ibuprofen over 120 min. In the presence of methyl alcohol, the degradation of MB and EY dyes is 16.7% and 55.7%, respectively. This suggests that hydroxyl radicals are responsible for the direct degradation of both dyes. In addition, after the second reuse, the degradation rate for MB was 94.08%, and for EY, it was 82.35%. For the third reuse, the degradation rate for MB was 97.15%, and for EY, it was 17%. These results indicate the significant potential of the new semiconductor in environmental remediation applications from an ecological synthesis.

Spotlight on therapeutic efficiency of green synthesis metals and their oxide nanoparticles in periodontitis

Periodontitis, one of the most prevalent dental diseases, causes the loss of bone and gum tissue that hold teeth in place. Several bacteria, commonly present in clinically healthy oral cavities, may induce and perpetuate periodontitis when their concentration rises in the gingival sulcus. Antibacterial effect against various Gram-negative and Gram-positive bacteria, including pathogenic and drug-resistant ones, has been shown for several distinct transient metal and metal oxide NPs. Therefore, NPs may be used in biomedicine to treat periodontal problems and in nanotechnology to inhibit the development of microorganisms. Instead of using harmful chemicals or energy-intensive machinery, biosynthesis of metal and metal oxide nanoparticles (NPs) has been suggested. To produce metal and metal oxide NPs, the ideal technique is "Green" synthesis because of its low toxicity and safety for human health and the environment. Gold NPs (AuNPs) appear to be less toxic to mammalian cells than other nanometals because their antibacterial activity is not dependent on reactive oxygen species (ROS). AgNPs also possess chemical stability, catalytic activity, and superior electrical and thermal conductivity, to name a few of their other advantageous characteristics. It was observed that zinc oxide (ZnO) NPs and copper (Cu) NPs exhibited discernible inhibitory effects against gram-positive and gram-negative bacterial strains, respectively. ZnO NPs demonstrated bactericidal activity against the microorganisms responsible for periodontitis. Medications containing magnetic NPs are highly effective against multidrug-resistant bacterial and fungal infections. The titanium dioxide (TiO2) NPs are implicated in elevating salivary peroxidase activity in individuals diagnosed with chronic periodontitis. Furthermore, specific metallic NPs have the potential to enhance the antimicrobial efficacy of periodontitis treatments when combined. Therefore, these NPs, as well as their oxide NPs, are only some of the metals and metal oxides that have been synthesized in environmentally friendly ways and shown to have therapeutic benefits against periodontitis.

Facile green synthesis of wasted hop-based zinc oxide nanozymes as peroxidase-like catalysts for colorimetric analysis

Hops are a common ingredient in beer production, and a considerable quantity of hops is usually discarded as a waste material once the brewing process is completed. Transforming this waste material into valuable nanomaterials offers a sustainable approach that has the potential to significantly mitigate environmental impact. Herein, a facile and green protocol for the production of zinc oxide nanozymes (ZnO NZs) using wasted hop extract (WHE) as a natural precursor was demonstrated. The process involved a hydrothermal synthesis method followed by a calcination step to form the final ZnO NZs. The results revealed that lupulon, the main β-acid in hops, particularly the phenolic hydroxy group, is primarily responsible for the biosynthesis of ZnO NZs. The WHE-ZnO NZs exhibited exceptional peroxidase-like (POD-like) activity and served as effective catalysts for the oxidation of 3,3,5,5-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide (H2O2). Analysis of the catalytic mechanism revealed that the POD-like activity of these WHE-ZnO NZs originated from their ability to expedite the transfer of electrons between TMB and H2O2, resulting in the enzymatic kinetics following the standard Michaelis-Menten mechanism. Furthermore, we developed a straightforward and user-friendly colorimetric technique for detecting both H2O2 and glucose. By utilizing the WHE-ZnO NZs as POD-like catalysts, we achieved a linear detection range of 1-1000 μM and a limit of detection of 0.24 μM (S/N = 3) for H2O2 detection and a linear range of 0-100 mM and a detection limit of 16.73 μM (S/N = 3) for glucose detection. These results highlighted the potential applications of our waste-to-resource approach for nanozyme synthesis in the field of analytical chemistry.

Constructing a novel type-Ⅱ ZnO/BiOCOOH heterojunction microspheres for the degradation of tetracycline and bacterial inactivation

A novel ZnO/BiOCOOH microsphere photocatalyst with a type-Ⅱ mechanism was developed for the first time. This strategy was accomplished by immobilizing ZnO onto 3D BiOCOOH microspheres via a single-step hydrothermal synthesis method. The ability to degrade tetracycline (TC) in water under visible light and inactivate bacteria of as-catalyst were analyzed. Among the prepared samples, the ZnO/BiOCOOH composite, with a mass ratio of 40%(Zn/Bi), exhibited the highest photocatalytic activity, which was able to degrade 98.22% of TC in just 90 min and completely eradicated Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in 48 h, and had potential application in solving water resource environmental pollution. The photoelectric characteristics of the photocatalysts were examined by means of electrochemical impedance spectroscopy (EIS) and photoluminescence (PL) spectroscopy. The findings indicated that the superior photocatalytic performance could be credited to the dissociation of electrons (e-) and holes (h+) in heterojunction composites. Finally, electron paramagnetic resonance (EPR) and capture experiments were conducted to confirm the photocatalytic mechanism of the type-Ⅱ heterojunction. This work provides a new Bi-base photocatalyst for aqueous environmental control.

Cross-linked cellulose beads as an eco-friendly support for ZnO/SnO2/carbon xerogel hybrid photocatalyst: Exploring the synergy between adsorption and photocatalysis under simulated sunlight

This paper explores the application of cross-linked cellulose beads as a sustainable and cost-effective support for the ZnO/SnO2/carbon xerogel hybrid photocatalyst. The application of the developed photocatalytic beads, named CB-Cat, was directed at a simultaneous adsorption/photocatalysis process, which was carried out under simulated sunlight. The characterization of the CB-Cat indicated a good dispersion of the photocatalyst of choice throughout the cellulose matrix, confirming its incorporation into the cellulose beads. Furthermore, it is possible to observe the presence of the photocatalyst on the surface of the CB-Cat, confirming its availability for the photonic activation process. The results showed that the simultaneous adsorption/photocatalysis process was optimal for enhancing the efficiency of methylene blue (MB) removal, especially when compared to the isolated adsorption process. Additionally, the regeneration of the CB-Cat between cycles was favorable toward the maintenance of the MB removal efficiency, as the process carried out without regeneration displayed significant efficiency drops between cycles. Finally, the mechanism evaluation evidenced that hydroxyl and superoxide radicals were the main responsible for the MB photocatalytic degradation during illumination with simulated sunlight.

Comparative Evaluation of Push-out Bond Strength of Three Different Root Canal Sealers: An In Vitro Study

AIM

The aim of this present study was to compare the dislodgement resistance of calcium silicate-based sealer, zinc oxide sealer, and a new sealer combining both zinc oxide and calcium silicate-based sealer in vitro.

MATERIALS AND METHODS

60 single-rooted human teeth were instrumented with F3 Protaper Gold. All endodontic canals were filled using gutta percha cones using the cold lateral condensation technique in combination using one of the mentioned sealers (n = 20 per group). The teeth were divided into three groups: group A consisted of Sealite® Ultra, group B consisted of K-Sealer®, and group C consisted of BioRoot® RC. After 2 months of incubation (37°C, 100% humidity) and after cutting out 2 mm from the most apical portion of the root apex, six slices of 1 mm thickness were generated. Mechanical dislodgement resistance was examined using a universal pressure-testing machine and the push-out bond strength (POBS) was calculated. Specimens were examined under 20× magnification to define the bond failure mode. Statistical analysis was executed using ANOVA, post hoc Turkey test for pairwise comparisons and Kruskal-Wallis tests.

RESULTS

The POBS of BioRoot® was significantly higher than the POBS of the two other sealers with a mean of 10.54 MPa ± 2.10 and 5.73 MPa ± 2.34, respectively (p < 0.001). Sealite® and K-Sealer® showed similar results in the median and coronal part. K-Sealer® revealed highest POBS compared with Sealite® in the apical part (p < 0.05).

CONCLUSION

The POBS of the zinc oxide and calcium silicate-based sealer was significantly lower compared with calcium silicate. Sealite® and K-Sealer® exhibited almost same results. BioRoot showed the highest POBS of all sealers.

CLINICAL SIGNIFICANCE

The current study was needed to evaluate the bond strength of three different cements to dentinal walls, by evaluating their respective POBS in vitro. The findings of this study may provide guidance for the clinician in the selection of an adequate endodontic sealer that guarantees an enhanced adhesive seal between the Gutta-percha and the dentinal canal walls. How to cite this article: Makhlouf MP, El Helou JD, Zogheib CE, et al. Comparative Evaluation of Push-out Bond Strength of Three Different Root Canal Sealers: An In Vitro Study. J Contemp Dent Pract 2024;25(1):15-19.

Development and testing of environment friendly nanohybrid coatings for sustainable agriculture technologies

Less than 50% of the applied urea fertilizer is taken up by plants due to poor nitrogen (N) use efficiency which affects overall agricultural productivity and leads to serious environmental and economic problems. Additionally, soils with high salinity might limit zinc (Zn) availability. Low Zn use efficiency (<30%) when applied as synthetic salts, e.g., zinc sulfate has therefore minimized their applicability. Within the past two decades, nanotechnology has gained a lot of interest in the development of effective nano fertilizers with high nutrient use efficiency (NUE). In this perspective, the approach of coating conventional fertilizers with nano materials especially, the ones which are essential nutrients has researched because of their high use efficiency and reduced losses. In this work, a novel and innovative formulation of hybrid nano fertilizer has been prepared for the sustainable release of nutrients. Zinc oxide nanoparticles (ZnO-NPs <50 nm) were incorporated into the biodegradable polymer (gelatin) and coated on urea using a fluidized bed coater. Among all the formulations, GZnSNPs (1.5% gelatin+0.5% elemental Zn as ZnO-NPs) showed a significant delay in urea release (<80 %) after 120 min). The sand column experiment showed sustainable Zn release for GZnSNPs i.e., 2.7 ppm vs. 3.5 ppm (GZnS) after the 6th day. Moreover, a substantial increase in wheat grain yield (6500 kg/ha), N uptake (46.5 kg/ha) and Zn uptake (21.64 g/ha) were observed for fields amended with GZnSNPs. The composition of GZnSNPs was valuable since this attracted the highest return relative to the other treatments. Gelatin supplied small N-containing molecules, resulting in extra value addition with ZnO-NPs thus increasing yield and fertilizer properties more relative to the same amount of elemental Zn given via bulk salt. Therefore, the findings of the current study recommend the use of ZnO-NPs in the agricultural sector without any negative effects on yield and NUE.

A magnetic stir bar sorbent of metal organic frameworks, carbon foam decorated zinc oxide and cryogel to enrich and extract parabens and bisphenols from food samples

A porous composite magnetic stir bar adsorbent was fabricated for the extraction and enrichment of parabens and bisphenols from selected beverage samples. The adsorbent comprised a metal organic framework, carbon foam decorated zinc oxide and magnetic nanoparticles embedded in polyvinyl alcohol cryogel. The porous composite stir bar adsorbent could adsorb parabens and bisphenols via hydrogen bonding, π-π and hydrophobic interactions. In the best conditions, linearity was good from 5.0 to 200.0 µg/L for methyl paraben, ethyl paraben and bisphenol A and from 10.0 to 200.0 µg/L for bisphenol B and butyl paraben. Limits of detection ranged from 1.5 to 3.0 µg/L. The developed composite stir bar was successfully applied to extract and determine parabens and bisphenols in fruit juice, beer and milk. Recoveries ranged from 89.5 to 99.5 % with RSDs lower than 6 %. The developed sorbent and new methodology were evaluated in terms of its green character with satisfactory results.

Application of some inorganic metal oxide nanoparticles to control E. coli in raw milk

Background

Nanoparticles are regarded as magical bullets because of their exclusive features. Recently, the usage of nanoparticles has progressed in almost all aspects of science and technology due to its ability to revolutionize certain fields. In the field of food science and technology, the application of nanoparticles is being researched in many various areas thus provides the dairy industry with a variety of new attitudes for developing the quality, prolong shelf life, ensure the safety and healthiness of foods.

Aim

This study aimed to focus on the application of some inorganic metal oxide nanoparticles (zinc oxide (ZnO), magnesium oxide (MgO), and calcium oxide (CaO)) to control E. coli in raw milk and ensure its safety.

Methods

The antibacterial action of certain nanoparticles (ZnO, MgO, and CaO) with multiple concentrations (0.1, 0.05, 0.025, 0.0125, 0.006, and 0.003 mg/ml) was evaluated against E. coli strains in ultra heat treated (UHT) milk samples. Also, storage temperature and storage period effects were studied.

Results

The findings of the current research revealed that inorganic metal oxide nanoparticles had a significant antibacterial role against E. coli, in the following order; ZnO, MgO, and CaO, respectively. The antibacterial effect of inorganic metal oxide nanoparticles is more noticeable at lower temperatures.

Conclusion

Inorganic metal nanoparticles can be used in the food industry for the purpose of the control of E. coli, and extension of the shelf life of dairy products.

Sustainable polylactic acid spunlace nonwoven fabrics with lignin/zinc oxide/water-based polyurethane composite coatings

In this paper, polylactic acid spunlace nonwoven fabrics were coated with lignin/zinc oxide/water-based polyurethane composite formulations, including five different ratios of lignin and zinc oxide, via a film applicator and thermally cured. The coated and thermally cured nonwoven fabrics were tested in terms of color values, tensile strength, abrasion resistance, ultraviolet protection, hydrophobicity, antibacterial activity, air, and vapor permeability properties. Characterization studies were conducted by FTIR, DSC, TGA, XRD, and SEM. The ultraviolet protection factor of 215.47 and a water contact angle of 90.27° were obtained with the fabric coated with WPU-1:5 formulation. Nonwoven fabric coated with the WPU-1:5 formulation showed evident antibacterial activity against S. aureus and E. coli bacteria as 89 % and 100 %, respectively. With the addition of lignin/ZnO into water-based polyurethane coating paste, PLA nonwoven fabric exhibited improved antibacterial activity, tensile strength, abrasion resistance, and ultraviolet light protection performance. However, composite coatings decreased air and vapor permeability and hydrophobicity of fabrics, but acceptable results were obtained. The results indicate that polylactic acid nonwoven fabrics, when treated with lignin/ZnO/WPU composite coatings, exhibit enhanced mechanical and functional properties, rendering them promising for applications in protective medical textiles.

Zinc oxide-aluminum oxide nanocomposite solid phase microextraction for diazepam and oxazepam trace determination

A new efficient ZnO-Al2O3 nanocomposite (ZANC) was synthesized to form solid-phase microextraction (SPME) fiber. The prepared fiber was used for trace determination of benzodiazepines by gas chromatography-flame ionization detector in urine samples. The effective parameters on the extraction process including extraction time, salt percentage, desorption time and sample pH were optimized by a factorial design method. The method was evaluated at the optimum conditions and limits of detection (LODs) were calculated 20 µg/L for diazepam and oxazepam. The method repeatability for oxazepam and diazepam (50 µg/L, n = 4) was calculated at 8.8 % and 6.4 %. Also, the method reproducibility was obtained, 7.45 % and 6.61 % for oxazepam and diazepam (50 µg/L, n = 4). Also, fiber-to-fiber relative standard deviation (RSDs%) for the target analytes were less than 15.5 %. The method linearity is within the range of 62-500 µg/L for diazepam and oxazepam. The ZANC-SPME fiber showed a good lifetime (60 times) with high chemical stability. The high thermal stability of ZANC-SPME fiber was attained at 280 °C. The extraction results of poly dimethylsiloxan/divinyl benzene (PDMS/DVB) fiber were compared by ZANC-SPME fiber. Therefore, the method is proposed as a suitable technique for benzodiazepines detection in the urine sample.

Attachment and proliferation of human gingival fibroblasts seeded on barrier membranes using Wharton's jelly-derived stem cells conditioned medium: An in vitro study

The effect of Wharton's jelly mesenchymal stem cells conditioned medium (WJMSCs-CM) and zinc oxide nanoparticles (ZnO-NPs) on cultured human gingival fibroblasts on various barrier membranes was investigated in this study. In this study, human gingival fibroblasts were prepared and cultured on three membranes: collagen membrane, acellular dermal matrix (ADM) with ZnO-NPs, and ADM without ZnO-NPs. WJMSCs-CM was given to the testing groups, while control groups received the same membranes without WJMSCs-CM. Following 48 and 72 h, 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) tests were performed to assess cell survival. Cell proliferation on the membranes was also evaluated using 4',6-diamidino-2-phenylindole (DAPI) staining after 48 and 72 h. Field emission scanning electron microscopy was used to determine membrane surface structure and cell adhesion. Nanoparticles were also subjected to an energy-dispersive x-ray analysis to identify their chemical structure. Two-way analysis of variance was used to conduct the statistical analysis. The p-value ≤.05 was considered significant. When ADM-ZnO-NPs were combined with CM, fibroblast viability, and adhesion significantly differed from ADM-ZnO-NPs alone. DAPI results confirmed cell proliferation in all six groups on both experiment days. The abundance and concentrated distribution of cells during cell proliferation were found in CM-containing membranes, specifically the ADM-ZnO-NPs membrane, demonstrating the improved biocompatibility of the ADM-ZnO-NPs membrane for cell proliferation. The other groups did not significantly differ from one another. WJMSCs-CM positively affected the viability and proliferation of gingival fibroblasts, but only marginally. Under certain conditions, ZnO-NPs below a specific concentration increased the biocompatibility of the membranes.

pH-responsive Photinia glabra-zinc oxide-protoporphyrin IX nanoconjugates with enhanced cellular uptake for photodynamic therapy towards cancer cells

Background: Photodynamic therapy (PDT) of cancer has been limited by the poor solubility of most photosensitizers, use of high drug dosages, and the pH difference between the tumor tissue microenvironment (slightly acidic) and the bloodstream. These affect cellular uptake, selectivity and singlet oxygen generation. Materials & methods: We formulated Photinia glabra-green synthesized zinc oxide-protoporphyrin IX (PG-ZnO-PP) nanoconjugates by conjugating the ZnO nanoparticles enriched with amino groups and PP. Results: PG-ZnO-PP nanoconjugates showed higher rate of reactive oxygen species generation, improved cellular uptake in the acidic pH and lower IC50 toward Eca-109 cells for PDT. Conclusion: PG-ZnO-PP nanoconjugates are a potential solution to reducing drug dosage of PP through improved drug uptake, for enhanced targetability and reduced skin photosensitivity with improved PDT efficacy.

Electrospun Core-Sheath Nanofibers with a Cellulose Acetate Coating for the Synergistic Release of Zinc Ion and Drugs

Precisely modulating the synergistic release behavior of multiple bioactive substances has emerged as a formidable challenge in recent years. In this work, we successfully prepared core-sheath nanofibers, where a thin cellulose acetate (CA) coating enrobed the core. Curcumin (Cur) was encapsulated in the core layer as a model drug, while zinc oxide (ZnO) nanoparticles were loaded on the sheath layer. The prepared fiber exhibited a straight cylindrical morphology containing nanoparticles, and the distinct core-sheath nanostructure was demonstrated through transmission electron microscopy (TEM). X-ray diffraction (XRD) and Fourier transform infrared (FTIR) were conducted to study the physical state and compatibility among CA, Cur, and ZnO. Drug release data indicated that core-sheath nanofibers were able to decelerate the rate of drug release, and the thickness of the sheath layer increased in the presence of ZnO particles. Most remarkably, these core-sheath nanofibers exhibited the remarkable ability to sustain the release of drugs and zinc ion (Zn2+), the two-day synergistically release behavior leading to a significant increase in cell proliferation. This material preparation strategy for the synergistic and controlled release of two bioactive substances is instructive for the exploration of innovative and versatile drug delivery systems.

Subcutaneous tissue reaction to a novel nano zinc oxide eugenol dental cement

BACKGROUND

Zinc oxide eugenol (ZOE) cement is a popular dental material due mainly to its analgesic, antibacterial and anti-inflammatory effects. The formulation of ZOE cement from nano particle-sized zinc oxide (ZnO) has the potential to increase these properties as well as reduce its adverse effects to the surrounding tissues.

OBJECTIVE

This study evaluated the subcutaneous tissue response towards nano ZOE cements (ZOE-A and ZOE-B) in comparison to conventional ZOE (ZOE-K).

METHODS

Test materials were implanted into 15 New Zealand white rabbits. Tissue samples were obtained after 7, 14, and 30 days (n = 5 per period) for histopathological evaluation of inflammatory cell infiltrate, fibrous tissue condensation, and abscess formation.

RESULTS

ZOE-A showed the lowest score for the variable macrophage and lymphocyte at day 7. Both ZOE-A and ZOE-B presented lower fibrous tissue condensation and abscess formation compared to conventional ZOE-K. By day 30, ZOE-A exhibited less lymphocytic and neutrophilic infiltrate compared to the other materials, while ZOE-B had the lowest score for macrophages. ZOE-K exerted higher inflammatory cell response at almost all of the experimental periods. All of the materials resulted in thin fiber condensation after 30 days.

CONCLUSIONS

Rabbit tissue implanted with ZOE-A and ZOE-B showed better response compared to ZOE-K.

Foliar co-application of zinc oxide and copper oxide nanoparticles promotes phytochemicals and essential oil production in dragonhead (Dracocephalum moldavica)

Individual nanoparticle application has been documented to promote plant production; however, whether co-application of two nanoparticles (NPs) is more sustainable and significantly promotes plant production is unclear. Herein, foliar co-applications of two NPs or their conventional fertilizer forms on the growth, micronutrient (copper and zinc) enrichment, primary productivity, and essential oil (EO) production in a medicinal annual, dragonhead (Dracocephalum moldavica L.), were investigated. Treatments included 1:1 ratio of zinc oxide nanoparticles (ZnONPs):copper oxide nanoparticles (CuONPs) (40-400 mg/L), and compared with individual NPs, individual zinc suspension (ZnS) and chelated copper (chelated-Cu), and their combination, at equivalent concentrations. Results showed that the highest bioenrichment of Zn and Cu was observed with 80-160 mg/L ZnS+chelated-Cu, 400 mg/L ZnONPs+CuONPs, or ionic combination treatments. A dose-dependent increase in hydrogen peroxide and malondialdehyde was observed with co-treatment of NPs or ions, and oxidative stress responses were higher with NPs or ions co-treatment than individual treatment. With 160 mg/L ZnONPs+CuONPs treatment, total chlorophyll, aboveground biomass, and essential oil production increased significantly compared to control, 160 mg/L CuONPs, and 160 mg/L ZnONPs (227, 157 and 823 %; 58, 79, and 51 %; and 46, 80, and 3 %, respectively). Flavonoid and anthocyanin content also increased significantly (58 and 50 %, respectively) with ZnONPs+CuONPs compared to ZnS+chelated-Cu and were higher than ZnONPs or CuONPs alone by 10 and 25 %, and 37 and 36 %, respectively. More importantly, EO production and quality improved with 160 mg/L ZnONPs+CuONPs treatment compared to control. Taken together, our findings showed that foliar co-treatment of 160 mg/L ZnONPs+CuONPs could significantly improve primary productivity, aboveground biomass, and EO quality and yield in dragonhead grown in semi-arid field conditions; and thus, 160 mg/L ZnONPs+CuONPs is recommended as an optimal foliar co-treatment strategy for promoting sustainable plant production in semi-arid regions where soil nutrients and water are limiting factors inhibiting crop yield.