Distinct pathways control recruitment and maintenance of myosin II at the cleavage furrow during cytokinesis

The correct localization of myosin II to the equatorial cortex is crucial for proper cell division. Here, we examine a collection of genes that cause defects in cytokinesis and reveal with live cell imaging two distinct phases of myosin II localization. Three genes in the rho1 signaling pathway, pebble (a Rho guanidine nucleotide exchange factor), rho1, and rho kinase, are required for the initial recruitment of myosin II to the equatorial cortex. This initial localization mechanism does not require F-actin or the two components of the centralspindlin complex, the mitotic kinesin pavarotti/MKLP1 and racGAP50c/CYK-4. However, F-actin, the centralspindlin complex, formin (diaphanous), and profilin (chickadee) are required to stably maintain myosin II at the furrow. In the absence of these latter genes, myosin II delocalizes from the equatorial cortex and undergoes highly dynamic appearances and disappearances around the entire cell cortex, sometimes associated with abnormal contractions or blebbing. Our findings support a model in which a rho kinase-dependent event, possibly myosin II regulatory light chain phosphorylation, is required for the initial recruitment to the furrow, whereas the assembly of parallel, unbranched actin filaments, generated by formin-mediated actin nucleation, is required for maintaining myosin II exclusively at the equatorial cortex.

A force-dependent state controls the coordination of processive myosin V

Myosin V is an efficient processive molecular motor. Recent experiments have shown how the structure and kinetics of myosin V are specialized to produce a highly processive motor capable of taking multiple 36-nm steps on an actin filament track. Here, we examine how two identical heads coordinate their activity to produce efficient hand-over-hand stepping. We have used a modified laser-trap microscope to apply a approximately 2-pN forward or backward force on a single-headed myosin V molecule, hypothesized to simulate forces experienced by the rear or lead head, respectively. We found that pulling forward produces only a small change in the kinetics, whereas pulling backward induces a large reduction in the cycling of the head. These results support a model in which the coordination of myosin V stepping is mediated by strain-generated inhibition of the lead head.

A Flexible Domain Is Essential for the Large Step Size and Processivity of Myosin VI

Myosin VI moves processively along actin with a larger step size than expected from the size of the motor. Here, we show that the proximal tail (the approximately 80-residue segment following the IQ domain) is not a rigid structure but, rather, a flexible domain that permits the heads to separate. With a GCN4 coiled coil inserted in the proximal tail, the heads are closer together in electron microscopy (EM) images, and the motor takes shorter processive steps. Single-headed myosin VI S1 constructs take nonprocessive 12 nm steps, suggesting that most of the processive step is covered by a diffusive search for an actin binding site. Based on these results, we present a mechanical model that describes stepping under an applied load.

Single molecule high-resolution colocalization of Cy3 and Cy5 attached to macromolecules measures intramolecular distances through time

Here we present a technique called single-molecule high-resolution colocalization (SHREC) of fluorescent dyes that allows the measurement of interfluorophore distances in macromolecules and macromolecular complexes with better than 10-nm resolution. By using two chromatically differing fluorescent molecules as probes, we are able to circumvent the Rayleigh criterion and measure distances much smaller than 250 nm. The probes are imaged separately and localized individually with high precision. The registration between the two imaging channels is measured by using fiduciary markers, and the centers of the two probes are mapped onto the same space. Multiple measurements can be made before the fluorophores photobleach, allowing intramolecular and intermolecular distances to be tracked through time. This technique's lower resolution limit lies at the upper resolution limit of single molecule FRET (smFRET) microscopy. The instrumentation and fluorophores used for SHREC can also be used for smFRET, allowing the two types of measurements to be made interchangeably, covering a wide range of interfluorophore distances. A dual-labeled duplex DNA molecule (30 bp) was used as a 10-nm molecular ruler to confirm the validity of the method. We also used SHREC to study the motion of myosin V. We directly observed myosin V's alternating heads while it walked hand-over-hand along an actin filament.

Mechanics and regulation of cytokinesis

Recent advances are revealing quantitative aspects of cytokinesis. Further, genetic analyses and cell imaging are providing insights into the molecular dynamics of cleavage furrow ingression as well as further refining our knowledge of the zones of the mitotic spindle that regulate the contractile properties of the overlying cortex. Ultimately, however, cortical mechanics are the result of signals that emanate from the mitotic spindle. A genuine quantitative understanding of cytokinesis must include a thorough analysis of the mechanical properties of the cortex and how signals modify these properties to dictate a well-controlled, error-free cytokinesis.

A mitotic kinesin-like protein required for normal karyokinesis, myosin localization to the furrow, and cytokinesis in Dictyostelium

Dictyostelium mitotic kinesin Kif12 is required for cytokinesis. Myosin II localization to the cleavage furrow is severely depressed in Kif12-null (Deltakif12) cells, which accounts in part for the cytokinesis failure. Myosin II-null cells, however, undergo mitosis-coupled cytokinesis when adhering to a surface, whereas the Deltakif12 cells cannot. During mitosis, the rate of change of internuclear separation in Deltakif12 cells is reduced compared with wild-type cells, indicating multiple roles of this molecular motor during mitosis and cytokinesis. GFP-Kif12, which rescues wild-type behavior when expressed in the Deltakif12 strain, is concentrated in the nucleus in interphase cells, translocates to the cytoplasm at the onset of mitosis, appears in the centrosomes and spindle, and later is concentrated in the spindle midbody. Given these results, we hypothesize a mechanism for myosin II translocation to the furrow to set up the contractile ring.

Dictyostelium myosin bipolar thick filament formation: importance of charge and specific domains of the myosin rod

Myosin-II thick filament formation in Dictyostelium is an excellent system for investigating the phenomenon of self-assembly, as the myosin molecule itself contains all the information required to form a structure of defined size. Phosphorylation of only three threonine residues can dramatically change the assembly state of myosin-II. We show here that the C-terminal 68 kDa of the myosin-II tail (termed AD-Cterm) assembles in a regulated manner similar to full-length myosin-II and forms bipolar thick filament (BTF) structures when a green fluorescent protein (GFP) “head” is added to the N terminus. The localization of this GFP-AD-Cterm to the cleavage furrow of dividing Dictyostelium cells depends on assembly state, similar to full-length myosin-II. This tail fragment therefore represents a good model system for the regulated formation and localization of BTFs. By reducing regulated BTF assembly to a more manageable model system, we were able to explore determinants of myosin-II self-assembly. Our data support a model in which a globular head limits the size of a BTF, and the large-scale charge character of the AD-Cterm region is important for BTF formation. Truncation analysis of AD-Cterm tail fragments shows that assembly is delicately balanced, resulting in assembled myosin-II molecules that are poised to disassemble due to the phosphorylation of only three threonines.

A portion of the myosin tail coupled to a green fluorescent protein "head" proves a valuable model for understanding myosin self-assembly

Myosin VI walks hand-over-hand along actin

Myosin VI is a molecular motor that can walk processively on actin filaments with a 36-nm step size. The walking mechanism of myosin VI is controversial because it takes very large steps without an apparent lever arm of required length. Therefore, myosin VI is argued to be the first exception to the widely established lever arm theory. It is therefore critical to directly demonstrate whether this motor walks hand-over-hand along actin despite its short lever arm. Here, we follow the displacement of a single myosin VI head during the stepping process. A single head is displaced 72 nm during stepping, whereas the center of mass previously has been shown to move 36 nm. The most likely explanation for this result is a hand-over-hand walking mechanism. We hypothesize the existence of a flexible element that would allow the motor to bridge the observed 72-nm distance.

The mechanism of myosin VI translocation and its load-induced anchoring

Myosin VI is thought to function as both a transporter and an anchor. While in vitro studies suggest possible mechanisms for processive stepping, a biochemical basis for anchoring has not been demonstrated. Using optical trapping, we observed myosin VI stepping against applied forces. Step size is not strongly affected by such loads. At saturating ATP, myosin VI kinetics shows little dependence on load until, at forces near stall, its stepping slows dramatically as load increases. At subsaturating ATP or in the presence of ADP, stepping kinetics is significantly inhibited by load. From our results, we propose a mechanism of myosin VI stepping that predicts a regulation through load of the motor's roles as transporter and anchor.

Structure of an F-actin trimer disrupted by gelsolin and implications for the mechanism of severing

Stable oligomers of filamentous actin were obtained by cross-linking F-actin with 1,4-N,N'-phenylenedimaleimide and depolymerization with excess segment-1 of gelsolin. Segment-1-bound and cross-linked actin oligomers containing either two or three actin subunits were purified and shown to nucleate actin assembly. Kinetic assembly data from mixtures of monomeric actin and the actin oligomers fit a nucleation model where cross-linked actin dimer or trimer reacts with an actin monomer to produce a competent nucleus for filament assembly. We report the three-dimensional structure of the segment-1-actin hexamer containing three actin subunits, each with a tightly bound ATP. Comparative analysis of this structure with twelve other actin structures provides an atomic level explanation for the preferential binding of ATP by the segment-1-complexed actin. Although the structure of segment-1-bound actin trimer is topologically similar to the helical model of F-actin (1), it has a distorted symmetry compared with that of the helical model. This distortion results from intercalation of segment-1 between actin protomers that increase the rise per subunit and rotate each of the actin subunits relative to their positions in F-actin. We also show that segment-1 of gelsolin is able to sever actin filaments, although the severing activity of segment-1 is significantly lower than full-length gelsolin.

Role of the lever arm in the processive stepping of myosin V

Myosin V is a two-headed molecular motor that binds six light chains per heavy chain, which creates unusually long lever arms. This motor moves processively along its actin track in discrete 36-nm steps. Our model is that one head of the two-headed myosin V tightly binds to actin and swings its long lever arm through a large angle, providing a stroke. We created single-headed constructs with different-size lever arms and show that stroke size is proportional to lever arm length. In a two-headed molecule, the stroke provides the directional bias, after which the unbound head diffuses to find its binding site, 36 nm forward. Our two-headed construct with all six light chains per head reconstitutes the 36-nm processive step seen in tissue-purified myosin V. Two-headed myosin V molecules with only four light chains per head are still processive, but their step size is reduced to 24 nm. A further reduction in the length of the lever arms to one light chain per head results in a motor that is unable to walk processively. This motor produces single small approximately 6-nm strokes, and ATPase and pyrene actin quench measurements show that only one of the heads of this dimer rapidly binds to actin for a given binding event. These data show that for myosin V with its normal proximal tail domain, both heads and a long lever arm are required for large, processive steps.

Dynacortin is a novel actin bundling protein that localizes to dynamic actin structures

Dynacortin is a novel protein that was discovered in a genetic suppressor screen of a Dictyostelium discoideum cytokinesis-deficient mutant cell line devoid of the cleavage furrow actin bundling protein, cortexillin I. While dynacortin is highly enriched in the cortex, particularly in cell-surface protrusions, it is excluded from the cleavage furrow cortex during cytokinesis. Here, we describe the biochemical characterization of this new protein. Purified dynacortin is an 80-kDa dimer with a large 5.7-nm Stokes radius. Dynacortin cross-links actin filaments into parallel arrays with a mole ratio of one dimer to 1.3 actin monomers and a 3.1 microm K(d). Using total internal reflection fluorescence microscopy, GFP-dynacortin and the actin bundling protein coronin-GFP are seen to concentrate in highly dynamic cortical structures with assembly and disassembly half-lives of about 15 s. These results indicate that cells have evolved different actin-filament cross-linking proteins with complementary cellular distributions that collaborate to orchestrate complex cell shape changes.

Quantitation of the distribution and flux of myosin-II during cytokinesis

BACKGROUND

During cytokinesis, the cell's equator contracts against the cell's global stiffness. Identifying the biochemical basis for these mechanical parameters is essential for understanding how cells divide. To achieve this goal, the distribution and flux of the cell division machinery must be quantified. Here we report the first quantitative analysis of the distribution and flux of myosin-II, an essential element of the contractile ring.

RESULTS

The fluxes of myosin-II in the furrow cortex, the polar cortex, and the cytoplasm were examined using ratio imaging of GFP fusion proteins expressed in Dictyostelium. The peak concentration of GFP-myosin-II in the furrow cortex is 1.8-fold higher than in the polar cortex and 2.0-fold higher than in the cytoplasm. The myosin-II in the furrow cortex, however, represents only 10% of the total cellular myosin-II. An estimate of the minimal amount of this motor needed to produce the required force for cell cleavage fits well with this 10% value. The cell may, therefore, regulate the amount of myosin-II sent to the furrow cortex in accordance with the amount needed there. Quantitation of the distribution and flux of a mutant myosin-II that is defective in phosphorylation-dependent thick filament disassembly confirms that heavy chain phosphorylation regulates normal recruitment to the furrow cortex.

CONCLUSION

The analysis indicates that myosin-II flux through the cleavage furrow cortex is regulated by thick filament phosphorylation. Further, the amount of myosin-II observed in the furrow cortex is in close agreement with the amount predicted to be required from a simple theoretical analysis.

Myosin VI is a processive motor with a large step size

Myosin VI is a molecular motor involved in intracellular vesicle and organelle transport. To carry out its cellular functions myosin VI moves toward the pointed end of actin, backward in relation to all other characterized myosins. Myosin V, a motor that moves toward the barbed end of actin, is processive, undergoing multiple catalytic cycles and mechanical advances before it releases from actin. Here we show that myosin VI is also processive by using single molecule motility and optical trapping experiments. Remarkably, myosin VI takes much larger steps than expected, based on a simple lever-arm mechanism, for a myosin with only one light chain in the lever-arm domain. Unlike other characterized myosins, myosin VI stepping is highly irregular with a broad distribution of step sizes.

The myosin relay helix to converter interface remains intact throughout the actomyosin ATPase cycle

Crystal structures of the myosin motor domain in the presence of different nucleotides show the lever arm domain in two basic angular states, postulated to represent prestroke and poststroke states, respectively (Rayment, I. (1996) J. Biol. Chem. 271, 15850-15853; Dominguez, R., Freyzon, Y., Trybus, K. M., and Cohen, C. (1998) Cell 94, 559-571). Contact is maintained between two domains, the relay and the converter, in both of these angular states. Therefore it has been proposed by Dominguez et al. (cited above) that this contact is critical for mechanically driving the angular change of the lever arm domain. However, structural information is lacking on whether this contact is maintained throughout the actin-activated myosin ATPase cycle. To test the functional importance of this interdomain contact, we introduced cysteines into the sequence of a "cysteine-light" myosin motor at position 499 on the lower cleft and position 738 on the converter domain (Shih, W. M., Gryczynski, Z., Lakowicz, J. L., and Spudich, J. A. (2000) Cell 102, 683-694). Disulfide cross-linking could be induced. The cross-link had minimal effects on actin binding, ATP-induced actin release, and actin-activated ATPase. These results demonstrate that the relay/converter interface remains intact in the actin strongly bound state of myosin and throughout the entire actin-activated myosin ATPase cycle.

The myosin swinging cross-bridge model

No biological system has been studied by more diverse approaches than the actin-based molecular motor myosin. Biophysics, biochemistry, physiology, classical genetics and molecular genetics have all made their contributions, and myosin is now becoming one of the best-understood enzymes in biology.

A myosin II mutation uncouples ATPase activity from motility and shortens step size

It is thought that Switch II of myosin, kinesin and G proteins has an important function in relating nucleotide state to protein conformation. Here we examine a myosin mutant containing an S456L substitution in the Switch II region. In this protein, mechanical activity is uncoupled from the chemical energy of ATP hydrolysis so that its gliding velocity on actin filaments is only one-tenth of that of the wild type. The mutant spends longer in the strongly bound state and exhibits a shorter step size, which together account for the reduction in in vitro velocity. This is the first single point mutation in myosin that has been found to affect step size.

In vitro assays of processive myosin motors

Myosin V is an actin-based motor thought to be involved in vesicle transport. Since the properties of such a motor may be expected to differ from those of muscle myosin II, we have examined myosin V-driven movement using a combination of gliding filament and optical trap assays to observe single molecules with high resolution. The results clearly demonstrate that brain myosin V is a highly efficient processive motor. In vitro motility assays at low myosin V densities reveal apparent single-molecule supported movement. Processive stepping was also observed in optical trapping assays of myosin V-driven motion. Here the methods that were used to demonstrate the processivity of myosin V are described. These methods include density-dependent assays that eliminate the possibility of aggregation or chance colocalization of multiple motors being responsible for apparent single-molecule motility. Such assays will be useful tools for identifying other processive classes of myosins.

A FRET-based sensor reveals large ATP hydrolysis-induced conformational changes and three distinct states of the molecular motor myosin

The molecular motor myosin is proposed to bind to actin and swing its light-chain binding region through a large angle to produce an approximately 10 nm step in motion coupled to changes in the nucleotide state at the active site. To date, however, direct dynamic measurements have largely failed to show changes of that magnitude. Here, we use a cysteine engineering approach to create a high resolution, FRET-based sensor that reports a large, approximately 70 degree nucleotide-dependent angle change of the light-chain binding region. The combination of steady-state and time-resolved fluorescence resonance energy transfer measurements unexpectedly reveals two distinct prestroke states. The measurements also show that bound Mg.ADP.Pi, and not bound Mg.ATP, induces the myosin to adopt the prestroke states.

Dynacortin, a genetic link between equatorial contractility and global shape control discovered by library complementation of a Dictyostelium discoideum cytokinesis mutant

We have developed a system for performing interaction genetics in Dictyostelium discoideum that uses a cDNA library complementation/multicopy suppression strategy. Chemically mutagenized cells were screened for cytokinesis-deficient mutants and one mutant was subjected to library complementation. Isolates of four different genes were recovered as modifiers of this strain's cytokinesis defect. These include the cleavage furrow protein cortexillin I, a novel protein we named dynacortin, an ezrin-radixin-moesin-family protein, and coronin. The cortexillin I locus and transcript were found to be disrupted in the strain, identifying it as the affected gene. Dynacortin is localized partly to the cell cortex and becomes enriched in protrusive regions, a localization pattern that is similar to coronin and partly dependent on RacE. During cytokinesis, dynacortin is found in the cortex and is somewhat enriched at the poles. Furthermore, it appears to be reduced in the cleavage furrow. The genetic interactions and the cellular distributions of the proteins suggest a hypothesis for cytokinesis in which the contraction of the medial ring is a function of spatially restricted cortexillin I and myosin II and globally distributed dynacortin, coronin, and RacE.

Myosin-V stepping kinetics: a molecular model for processivity

Myosin-V is a molecular motor that moves processively along its actin track. We have used a feedback-enhanced optical trap to examine the stepping kinetics of this movement. By analyzing the distribution of time periods separating discrete approximately 36-nm mechanical steps, we characterize the number and duration of rate-limiting biochemical transitions preceding each such step. These data show that myosin-V is a tightly coupled motor whose cycle time is limited by ADP release. On the basis of these results, we propose a model for myosin-V processivity.