Responsive Photonic Crystals

Centrifugation-assisted Assembly of Colloidal Silica into Crack-Free and Transferrable Films with Tunable Crystalline Structures

Self-assembly of colloidal particles into colloidal films has many actual and potential applications. While various strategies have been developed to direct the assembly of colloidal particles, fabrication of crack-free and transferrable colloidal film with controllable crystal structures still remains a major challenge. Here we show a centrifugation-assisted assembly of colloidal silica spheres into free-standing colloidal film by using the liquid/liquid interfaces of three immiscible phases. Through independent control of centrifugal force and interparticle electrostatic repulsion, polycrystalline, single-crystalline and quasi-amorphous structures can be readily obtained. More importantly, by dehydration of silica particles during centrifugation, the spontaneous formation of capillary water bridges between particles enables the binding and pre-shrinkage of the assembled array at the fluid interface. Thus the assembled colloidal films are not only crack-free, but also robust and flexible enough to be easily transferred on various planar and curved substrates.

Unexpected in-situ Free Radical Generation and Catalysis to Ag/Polymer Nanocomposite

In this study, we discover unexpectedly that simple reaction of AgNO₃ with oleic acid (OA) without solvent and surfactant could generate alkyl free radical which can catalyze double-bond polymerization of OA to form 1D polymeric oleic acid (POA) chain. In certain conditions, these POA chains circumvolute tightly each other to form microspheres and micro-plates in which monodisperse 4-5 nm Ag nanoparticles (NPs) were absorbed. It has been revealed that alkyl free radical generated during the redox reaction of carboxyl group of OA with Ag⁺ at relative low temperature. Then, the alkyl free radical catalyzed the double-bond polymerization of OA when the reaction temperature was further increased. Different from commonly-seen hydrophobic nanoparticles prepared in oleic acid-based microemulsion system, the nanocomposites cannot dispersed in n-hexane and could dispersed in ethanol and THF. The unusual dispersion behavior has been explained in terms of their structure and polarity of POA chain. The method combines the nucleation of Ag nanoparticles and the polymerization of monomer in a facile one-pot reaction, which provides a novel way for metal-polymer microsphere nanocomposite with low-cost, easy-operation and high-yield.

Multifunctional inverse opal particles for drug delivery and monitoring

Particle-based delivery systems have a demonstrated value for drug discovery and development. Here, we report a new type of particle-based delivery system that has controllable release and is self-monitoring. The particles were composed of poly(N-isopropylacrylamide) (pNIPAM) hydrogel with an inverse opal structure. The presence of macropores in the particles provides channels for active drug loading and release from the materials.

Photonic sensing of organic solvents through geometric study of dynamic reflection spectrum

Traditional photonic sensing based on the change of balanced reflection of photonic structures can hardly distinguish chemical species with similar refractive indices. Here a sensing method based on the dynamic reflection spectra (DRS) of photonic crystal gel has been developed to distinguish even homologues, isomers and solvents with similar structures and physical properties. There are inherent relationships between solvent properties, diffusion behaviour and evolution of reflection signals, so that the geometric characteristics of DRS pattern including ascending/descending, colour changes, splitting/merging and curvature of reflection band can be utilized to recognize different organic solvents. With adequate solvents being tested, a database of DRS patterns can be established, which provide a standard to identify an unknown solvent.

Hydrophilic-Hydrophobic Patterned Molecularly Imprinted Photonic Crystal Sensors for High-Sensitive Colorimetric Detection of Tetracycline

A hydrophilic-hydrophobic patterned molecularly imprinted (MIP) photonic crystal (PC) sensor is fabricated for highly sensitive tetracycline detection. The relationship between the tetracycline concentration, its corresponding color of the sensor, and the diameter of MIP-PC dot is found using a fan-shaped color card. This work provides a new strategy to design the sensors with tunable detection ranges for practical applications.

Interferometric nanoporous anodic alumina photonic coatings for optical sensing

Herein, we present a systematic study on the development, optical optimization and sensing applicability of colored photonic coatings based on nanoporous anodic alumina films grown on aluminum substrates. These optical nanostructures, so-called distributed Bragg reflectors (NAA-DBRs), are fabricated by galvanostatic pulse anodization process, in which the current density is altered in a periodic manner in order to engineer the effective medium of the resulting photonic coatings. As-prepared NAA-DBR photonic coatings present brilliant interference colors on the surface of aluminum, which can be tuned at will within the UV-visible spectrum by means of the anodization profile. A broad library of NAA-DBR colors is produced by means of different anodization profiles. Then, the effective medium of these NAA-DBR photonic coatings is systematically assessed in terms of optical sensitivity, low limit of detection and linearity by reflectometric interference spectroscopy (RIfS) in order to optimize their nanoporous structure toward optical sensors with enhanced sensing performance. Finally, we demonstrate the applicability of these photonic nanostructures as optical platforms by selectively detecting gold(iii) ions in aqueous solutions. The obtained results reveal that optimized NAA-DBR photonic coatings can achieve an outstanding sensing performance for gold(iii) ions, with a sensitivity of 22.16 nm μM(-1), a low limit of detection of 0.156 μM (i.e. 30.7 ppb) and excellent linearity within the working range (0.9983).

Colorimetric logic response based on aptamer functionalized colloidal crystal hydrogels

A novel colorimetric logic system based on the aptamer-cross-linked colloidal crystal hydrogel (CCH) was developed. With the input stimuli of Hg(2+) and Ag(+), the CCH displayed shrinking response and colour change corresponding to the logical "OR" and "AND" gate. The visualization of the logic output signals is realized.

Exploration and exploitation of water in colloidal crystals

Water on solid surfaces is ubiquitously found in nature, in most cases due to mere adsorption from ambient moisture. Because porous structures have large surfaces, water may significantly affect their characteristics. This is particularly obvious in systems formed by separate particles, whose interactions are strongly influenced by small amounts of liquid. Water/solid phenomena, like adsorption, condensation, capillary forces, or interparticle cohesion, have typically been studied at relatively large scales down to the microscale, like in wet granular media. However, much less is known about how water is confined and acts at the nanoscale, for example, in the interstices of divided systems, something of utmost importance in many areas of materials science nowadays. With novel approaches, in-depth investigations as to where and how water is placed in the nanometer-sized pores of self-assembled colloidal crystals have been made, which are employed as a well-defined, versatile model system with useful optical properties. In this Progress Report, knowledge gained in the last few years about water distribution in such nanoconfinements is gathered, along with how it can be controlled and the consequences it brings about to extract new or enhance existing material functionalities. New methods developed and new capabilities of standard techniques are described, and the water interplay with the optical, chemical, and mechanical properties of the ensemble are discussed. Some lines for applicability are also highlighted and aspects to be addressed in the near future are critically summarized.

Janus Suprabead Displays Derived from the Modified Photonic Crystals toward Temperature Magnetism and Optics Multiple Responses

The design and development of Janus suprabeads (JSs) with multiple responses are highly desirable in the fabrication of functional nanomaterials. In this work, we report a triphase microfluidic strategy for the construction of JSs with temperature-magnetism-optics triple responses. Initially, macromonomer poly(methacrylic acid) (PMAA) obtained via catalytic chain transfer polymerization (CCTP) was grafted onto the polystyrene (PS) colloidal photonic crystals (CPCs) surface. Because abundant carboxylic acid groups in PMAA could coordinate cadmium ions for in situ production of fluorescent CdS quantum dots (QDs) after introducing sulfur ions, the as-prepared JSs were endowed with favorable optical properties. Meanwhile, the as-prepared Cd(2+)/PS CPCs were employed as a template to build JSs with temperature-magnetism sensitivity via the introduction of magnetic Fe3O4 and hydrogels. Finally, the fluorescence pattern was easily performed by using chalcogenides as "ink" to write on the pad, in which in situ reaction mechanism was involved in the response. The multiple responsive JSs show promising applications in sensor, display, and anticounterfeit fields.

Responsive inverse opal hydrogels for the sensing of macromolecules

Dual responsive inverse opal hydrogels were designed as autonomous sensor systems for (bio)macromolecules, exploiting the analyte-induced modulation of the opal's structural color. The systems that are based on oligo(ethylene glycol) macromonomers additionally incorporate comonomers with various recognition units. They combine a coil-to-globule collapse transition of the LCST type with sensitivity of the transition temperature toward molecular recognition processes. This enables the specific detection of macromolecular analytes, such as glycopolymers and proteins, by simple optical methods. While the inverse opal structure assists the effective diffusion even of large analytes into the photonic crystal, the stimulus responsiveness gives rise to strong shifts of the optical Bragg peak of more than 100 nm upon analyte binding at a given temperature. The systems' design provides a versatile platform for the development of easy-to-use, fast, and low-cost sensors for pathogens.

Ceramic Nanocomposites from Tailor-Made Preceramic Polymers

The present Review addresses current developments related to polymer-derived ceramic nanocomposites (PDC-NCs). Different classes of preceramic polymers are briefly introduced and their conversion into ceramic materials with adjustable phase compositions and microstructures is presented. Emphasis is set on discussing the intimate relationship between the chemistry and structural architecture of the precursor and the structural features and properties of the resulting ceramic nanocomposites. Various structural and functional properties of silicon-containing ceramic nanocomposites as well as different preparative strategies to achieve nano-scaled PDC-NC-based ordered structures are highlighted, based on selected ceramic nanocomposite systems. Furthermore, prospective applications of the PDC-NCs such as high-temperature stable materials for thermal protection systems, membranes for hot gas separation purposes, materials for heterogeneous catalysis, nano-confinement materials for hydrogen storage applications as well as anode materials for secondary ion batteries are introduced and discussed in detail.

Morphology genetic materials templated from natural species

The structural characteristics of natural species have been optimized by natural selection for millions of years. They offer specific functions much more effectively than artificial approaches. Morphology genetic materials utilize morphologies gleaned from natural selection into their hierarchical structures. The combination of natural morphologies and manually selected functional materials makes these novel materials suitable for many applications. This review focuses on the strategies by which the structures and functions of natural species can be utilized. Specific functions inherited from both the natural microstructures and coupled functional materials are highlighted with regard to various applications, including photonics, light-harvesting, surface-enhanced Raman scattering (SERS), and electrodes for supercapacitors and batteries, as well as environmentally friendly materials.

Microfluidic synthesis of barcode particles for multiplex assays

The increasing use of high-throughput assays in biomedical applications, including drug discovery and clinical diagnostics, demands effective strategies for multiplexing. One promising strategy is the use of barcode particles that encode information about their specific compositions and enable simple identification. Various encoding mechanisms, including spectroscopic, graphical, electronic, and physical encoding, have been proposed for the provision of sufficient identification codes for the barcode particles. These particles are synthesized in various ways. Microfluidics is an effective approach that has created exciting avenues of scientific research in barcode particle synthesis. The resultant particles have found important application in the detection of multiple biological species as they have properties of high flexibility, fast reaction times, less reagent consumption, and good repeatability. In this paper, research progress in the microfluidic synthesis of barcode particles for multiplex assays is discussed. After introducing the general developing strategies of the barcode particles, the focus is on studies of microfluidics, including their design, fabrication, and application in the generation of barcode particles. Applications of the achieved barcode particles in multiplex assays will be described and emphasized. The prospects for future development of these barcode particles are also presented.

Magnetochromatic thin-film microplates

A new type of magnetochromatic material is developed based on thin-film interference of microplates self-assembled from super-paramagnetic nanocrystals. Dynamic optical tuning can be achieved through orientational manipulation of free-standing super-paramagnetic thin-film microplates using external magnetic fields.

Polymer brush-based optical device with multiple responsivities

Poly(N-isopropylacrylamide) brush-based optical materials were fabricated, and the tunability of their optical properties characterized.

Dual photonic-bandgap optical films towards the generation of photonic crystal-derived 2-dimensional chemical codes

Chemical-oriented 2-dimensional optical codes with diverse dual-photonic bandgap (dual-PBG) signals are designed for high-capacity encoding and anti-jamming sensing applications.

Facile fabrication of a magnetically assembled colloidal photonic crystal film via radical polymerization

A facile, economical and practical technique to fabricate a magnetically assembled colloidal photonic crystal in a polyacrylamide hydrogel matrix was demonstrated by an instant radical polymerization.

Fast assembly of anti-voltage photonic crystals in microfluidic channels for ultrafast separation of amino acids and peptides

Photonic crystals (PCs) with periodically ordered particle beds are ideal media for high-performance separation but hard to be stably and crack-freely assembled in various microfluidic channels. Here we describe a facile method to fast assemble crack-free and high-voltage-sustainable PCs into the micro channels. The key is to speed up an evaporation-induced assembly by heating up (at 70 °C) and blowing away the solvent vapor from one end of a channel and supplying silica suspension at the other end. Crack-free PCs can be prepared at a speed of 0.2 cm/min. The heat also accelerates the silica particles to gel with solvent water and in turn to form a particle network by linking each other through their gelled surface. PCs with two pieces of particle network at their ends are capable of resistance to electrical fields up to 2,000 V/cm. Ultrafast separation of amino acids can be achieved along a 2.5-mm PC in 4 s and peptides along a 10-mm PC in 12 s.

Water-responsive dual-coloured photonic polymer coatings based on cholesteric liquid crystals

This work describes a straightforward method to prepare patterned photonic coatings which alter their colour when exposed to water.

NIR light-directing self-organized 3D photonic superstructures loaded with anisotropic plasmonic hybrid nanorods

Self-organized 3D superstructures loaded with plasmonic hybrid nanorods undergo structural transformation from body-centered cubic to simple cubic upon NIR-light irradiation resulting from the “photothermal effect” of gold nanorods.

Particle selection through topographic templates in nematic colloids

Liquid crystal colloids have been proposed as suitable candidates for responsive photonic crystals. Large scale growth of such colloidal systems is, however, a challenge and recently template-assisted assembly has been proposed to guide the growth of colloidal crystals, with controlled symmetries, in nematic liquid crystals. Known for their long-range anisotropic interactions, these colloidal systems are stabilized typically at the center of the cells due to strong particle-wall repulsion from the confining substrates. This behaviour is dramatically changed in the presence of topographic patterning. Here we propose the use of topographic modulation of surfaces to select and localize particles in nematic colloids. By considering convex and concave deformations of one of the confining surfaces we show that the colloid-flat surface repulsion may be enhanced or switched into an attraction. In particular, we find that when the colloidal particles have the same anchoring conditions as the patterned surfaces, they are strongly attracted to concave dimples, while if they exhibit different anchoring conditions they are pinned at the top of convex protrusions. Although dominated by elastic interactions the first mechanism is reminiscent of the depletion induced attraction or of the key-lock mechanism, while the second is specific to liquid crystal colloids. These long-ranged, highly tunable, surface-colloid interactions contribute to the development of template-assisted assembly of large colloidal crystals, with well defined symmetries, as required for applications.

Spherical colloidal photonic crystals

CONSPECTUS: Colloidal photonic crystals (PhCs), periodically arranged monodisperse nanoparticles, have emerged as one of the most promising materials for light manipulation because of their photonic band gaps (PBGs), which affect photons in a manner similar to the effect of semiconductor energy band gaps on electrons. The PBGs arise due to the periodic modulation of the refractive index between the building nanoparticles and the surrounding medium in space with subwavelength period. This leads to light with certain wavelengths or frequencies located in the PBG being prohibited from propagating. Because of this special property, the fabrication and application of colloidal PhCs have attracted increasing interest from researchers. The most simple and economical method for fabrication of colloidal PhCs is the bottom-up approach of nanoparticle self-assembly. Common colloidal PhCs from this approach in nature are gem opals, which are made from the ordered assembly and deposition of spherical silica nanoparticles after years of siliceous sedimentation and compression. Besides naturally occurring opals, a variety of manmade colloidal PhCs with thin film or bulk morphology have also been developed. In principle, because of the effect of Bragg diffraction, these PhC materials show different structural colors when observed from different angles, resulting in brilliant colors and important applications. However, this angle dependence is disadvantageous for the construction of some optical materials and devices in which wide viewing angles are desired. Recently, a series of colloidal PhC materials with spherical macroscopic morphology have been created. Because of their spherical symmetry, the PBGs of spherical colloidal PhCs are independent of rotation under illumination of the surface at a fixed incident angle of the light, broadening the perspective of their applications. Based on droplet templates containing colloidal nanoparticles, these spherical colloidal PhCs can be generated by evaporation-induced nanoparticle crystallization or polymerization of ordered nanoparticle crystallization arrays. In particular, because microfluidics was used for the generation of the droplet templates, the development of spherical colloidal PhCs has progressed significantly. These new strategies not only ensure monodispersity, but also increase the structural and functional diversity of the PhC beads, paving the way for the development of advanced optoelectronic devices. In this Account, we present the research progress on spherical colloidal PhCs, including their design, preparation, and potential applications. We outline various types of spherical colloidal PhCs, such as close-packed, non-close-packed, inverse opal, biphasic or multiphasic Janus structured, and core-shell structured geometries. Based on their unique optical properties, applications of the spherical colloidal PhCs for displays, sensors, barcodes, and cell culture microcarriers are presented. Future developments of the spherical colloidal PhC materials are also envisioned.

Bio-inspired vapor-responsive colloidal photonic crystal patterns by inkjet printing

Facile, fast, and cost-effective technology for patterning of responsive colloidal photonic crystals (CPCs) is of great importance for their practical applications. In this report, we develop a kind of responsive CPC patterns with multicolor shifting properties by inkjet printing mesoporous colloidal nanoparticle ink on both rigid and soft substrates. By adjusting the size and mesopores' proportion of nanoparticles, we can precisely control the original color and vapor-responsive color shift extent of mesoporous CPC. As a consequence, multicolor mesoporous CPCs patterns with complex vapor responsive color shifts or vapor-revealed implicit images are subsequently achieved. The complicated and reversible multicolor shifts of mesoporous CPC patterns are favorable for immediate recognition by naked eyes but hard to copy. This approach is favorable for integration of responsive CPCs with controllable responsive optical properties. Therefore, it is of great promise for developing advanced responsive CPC devices such as anticounterfeiting devices, multifunctional microchips, sensor arrays, or dynamic displays.

Synthesis and assembly of nanomaterials under magnetic fields

Traditionally, magnetic field has long been regarded as an important means for studying the magnetic properties of materials. With the development of synthesis and assembly methods, magnetic field, similar to conventional reaction conditions such as temperature, pressure, and surfactant, has been developed as a new parameter for synthesizing and assembling special structures. To date, magnetic fields have been widely employed for materials synthesis and assembly of one-dimensional (1D), two-dimensional (2D) or three-dimensional (3D) aggregates. In this review, we aim to provide a summary on the applications of magnetic fields in this area. Overall, the objectives of this review are: (1) to theoretically discuss several factors that refer to magnetic field effects (MFEs); (2) to review the magnetic-field-induced synthesis of nanomaterials; the 1D structure of various nanomaterials, such as metal oxides/sulfide, metals, alloys, and carbon, will be described in detail. Moreover, the MFEs on spin states of ions, magnetic domain and product phase distribution will be also involved; (3) to review the alignment of carbon nanotubes, assembly of magnetic nanomaterials and photonic crystals with the help of magnetic fields; and (4) to sketch the future opportunities that magnetic fields can face in the area of materials synthesis and assembly.

Photonic metal-organic framework composite spheres: a new kind of optical material with self-reporting molecular recognition

Exploiting metal-organic framework (MOF) materials as novel building blocks to construct superstructures with extended and enhanced functions represents a big challenge. In biological systems, the ordering of many components is not achieved by interaction of the components with each other, but by interaction of each component with the host protein which provides a matrix to support the entire assembly. Inspired by biological systems, in this work, a general strategy for efficient spatial arrangement of MOF materials was developed by using spherical colloidal crystals as host matrices, affording a new class of highly tunable MOF composite spheres with a series of distinctive properties. It was found that the synergetic combination of the unique features of both MOF and photonic colloidal crystal imparted these hierarchically structured spheres intrinsic optical properties, specific molecular recognition with self-reporting signalling, derivatization capability, and anisotropy. More importantly, the unique photonic band-gap structure integrated in these composite spheres provides a more convenient means to manipulate the photophysical and photochemical behaviour of the trapped guest molecules in MOF nanocavities.

Microfluidic molding of photonic microparticles with engraved elastomeric membranes

A microfluidic approach to prepare photonic microparticles by repeated molding of photocurable colloidal suspension is reported. An elastomeric membrane with negative relieves which vertically separates two microfluidic channels is integrated; bottom channel is used for suspension flow, whereas water-filled top channel is used for pneumatic actuation of the membrane. Upon pressurization of the top channel, membrane is deformed to confine the suspension into its negative relieves, which is then polymerized by UV irradiation, making microparticles with mold shape. The microparticles are released from the mold by relieving the pneumatic pressure and flows through the bottom channel. This one cycle of molding, polymerization, and release can be repeatedly performed in microfluidic device of which pneumatic valves are actuated in a programmed manner. The microparticles exhibit structural colors when the suspension contains high concentration of silica nanoparticles; the nanoparticles form regular arrays and the microparticles reflect specific wavelength of light as a photonic crystals. The silica nanoparticles can be selectively removed to make pronounced structural colors. In addition, the microparticles can be further functionalized by embedding magnetic particles in the matrix of the microparticles, enabling the remote control of rotational motion of microparticles.

Utilizing stretch-tunable thermochromic elastomeric opal films as novel reversible switchable photonic materials

In this work, the preparation of highly thermoresponsive and fully reversible stretch-tunable elastomeric opal films featuring switchable structural colors is reported. Novel particle architectures based on poly(diethylene glycol methylether methacrylate-co-ethyl acrylate) (PDEGMEMA-co-PEA) as shell polymer are synthesized via seeded and stepwise emulsion polymerization protocols. The use of DEGMEMA as comonomer and herein established synthetic strategies leads to monodisperse soft shell particles, which can be directly processed to opal films by using the feasible melt-shear organization technique. Subsequent UV crosslinking strategies open access to mechanically stable and homogeneous elastomeric opal films. The structural colors of the opal films feature mechano- and thermoresponsiveness, which is found to be fully reversible. Optical characterization shows that the combination of both stimuli provokes a photonic bandgap shift of more than 50 nm from 560 nm in the stretched state to 611 nm in the fully swollen state. In addition, versatile colorful patterns onto the colloidal crystal structure are produced by spatial UV-induced crosslinking by using a photomask. This facile approach enables the generation of spatially cross-linked switchable opal films with fascinating optical properties. Herein described strategies for the preparation of PDEGMEMA-containing colloidal architectures, application of the melt-shear ordering technique, and patterned crosslinking of the final opal films open access to novel stimuli-responsive colloidal crystal films, which are expected to be promising materials in the field of security and sensing applications.

Specific and ultrasensitive ciprofloxacin detection by responsive photonic crystal sensor

A new approach for specific and ultrasensitive measurement of ciprofloxacin has been developed by integrating ternary complexes into responsive photonic crystal (RPC). Tryptophan was first immobilized within the polyacrylamide hydrogel substrates of RPC. The determination of ciprofloxacin was via the existence of zinc(II) ions that function as a 'bridge' to form specific tryptophan-zinc(II)-ciprofloxacin complexes step by step, which resulted in a stepwise red-shift of the diffraction wavelength. A maximum wavelength shift from 798 to 870 nm for ciprofloxacin was observed when the RPC film was immersed in 10(-4)M ciprofloxacin. A linear relationship has been obtained between the Δλ of diffraction peak and logarithm of ciprofloxacin concentration at pH 5.0 in the range of 10(-10) to 10(-4)M. And the least detectable concentration in present work is about 5 × 10(-11)M. The results demonstrated that the as-designed ternary complexes-based RPC sensor exhibited high sensitivity, satisfactory specificity and excellent recoverability for sensing of ciprofloxacin in aqueous media and were validated by detecting ciprofloxacin in the eye-drop sample.

Highly sensitive assay for acetylcholinesterase activity and inhibition based on a specifically reactive photonic nanostructure

Assays for acetylcholinesterase (AChE) with high sensitivity and high selectivity as well as facile manipulation have been urgently required in various fields. In this work, a reaction-based photonic strategy was developed for the efficient assay of AChE activity and inhibition based on the synergetic combination of the specific thiol-maleimide addition reaction with photonic porous structure. It was found that various applications including detection of AChE activity, measurement of the related enzymatic kinetics, and screening of inhibitors could be efficiently implemented using such strategy. Remarkably, the unique photonic nanostructure endows the constructed sensing platform with high sensitivity with a limit of detection (LOD) of 5 mU/mL for AChE activity, high selectivity, and self-reporting signaling. Moreover, the label-free solid film-based sensing approach described here has advantages of facile manipulation and bare-eye readout, compared with conventional liquid-phase methods, exhibiting promising potential in practical application for the AChE assay.

Two-dimensional photonic crystal sensors for visual detection of lectin concanavalin A

We fabricated a two-dimensional (2-D) photonic crystal lectin sensing material that utilizes light diffraction from a 2-D colloidal array attached to the surface of a hydrogel that contains mannose carbohydrate groups. Lectin-carbohydrate interactions create hydrogel cross-links that shrink the hydrogel volume and decrease the 2-D particle spacing. This mannose containing 2-D photonic crystal sensor detects Concanavalin A (Con A) through shifts in the 2-D diffraction wavelength. Con A concentrations can be determined by measuring the diffracted wavelength or visually determined from the change in the sensor diffraction color. The concentrations are easily monitored by measuring the 2-D array Debye ring diameter. Our observed detection limit for Con A is 0.02 mg/mL (0.7 μM). The 2-D photonic crystal sensors are completely reversible and can monitor Con A solution concentration changes.