Nanomaterials for biosensing applications: a review

Marinobacter lipolyticus from Red Sea for lipase production and modulation of silver nanomaterials for anti-candidal activities

In this study, the bacterial strain CEES 33 was isolated from the coastal area of the Red Sea, Jeddah, Kingdom of Saudi Arabia. The bacterium isolate was identified and characterized by using biochemical and molecular methods. The isolate CEES 33 has been identified as Gram-negative rod shaped and cream pigmented spherical colonies. It also demonstrated a positive result for nitrate reduction, oxidase, catalase, citrate utilization, lipase and exopolysaccharide production. Strain CEES 33 was characterized at the molecular level by partial 16S rRNA sequencing and it has been identified as Marinobacter lipolyticus (EMBL|LN835275.1). The lipolytic activity of the isolate was also observed 2.105 nkatml-1. Furthermore, the bacterial aqueous extract was used for green synthesis of silver nanoparticles (AgNPs), which was further confirmed by UV-visible spectra (430 nm), XRD and SEM analysis. Moreover, the biological functional group that involved in AgNPs synthesis was confirmed by FTIR spectra. The biological activities of AgNPs were also investigated, which showed a significant growth inhibition of Candida albicans with 16 ± 2 mm zone of inhibition at 10 μg dose/wells. Therefore, bacterium Marinobacter lipolyticus might be used in future for lipase production and nanoparticles fabrication for biomedical application, to control fungal diseases caused by C. albicans.

Assessment of the short-term toxicity of TiO2 nanofiber in Sprague Dawley rats

Synthetic nanomaterials have many unique chemical and physical properties, mainly due to their high specific surface area and quantum confinement effect. Specifically, titanium dioxide (TiO₂ ) nanomaterial has high stability, anticorrosive, and photocatalytic properties. However, there are concerns over adverse biological effects resulting from bioeffects. This study was to investigate adverse effects associated with acute ingestion of TiO₂ nanofiber (TDNF). TDNF was fabricated via electrospinning method, followed by dissolution in water. Six- to seven-week-old male Sprague Dawley rats were exposed to a total of 0, 40, and 60 ppm of TDNF for 2 weeks via oral gavage. Serum total protein and weight gain during the course of this study displayed marginal concentration-dependent alterations. These findings were followed by a global gene expression analysis to identify which transcripts might be responsive to TNDF toxicity. Differentially expressed mRNA levels were dose-dependently higher in animals exposed to TNDF. The majority of the affected genes were biochemically involved in immune response and inflammation. We believe this is due to the fact that TNDF is unable to penetrate the cell and forms phagocytosis sites that trigger inflammatory and immune response. All results taken together, short-term ingestion of TNDF produced marginal effects indicative of inflammation. Finally, the broad gene expression data were validated through quantification of immunoglobulin heavy chain alpha (Igha). Igha gene was upregulated in treated groups, showing similar expression patterns to the global gene expression data.

Magnetic sensing platform technologies for biomedical applications

Detection and quantification of a variety of micro- and nanoscale entities, e.g. molecules, cells, and particles, are crucial components of modern biomedical research, in which biosensing platform technologies play a vital role. Confronted with the drastic global demographic changes, future biomedical research entails continuous development of new-generation biosensing platforms targeting even lower costs, more compactness, and higher throughput, sensitivity and selectivity. Among a wide choice of fundamental biosensing principles, magnetic sensing technologies enabled by magnetic field sensors and magnetic particles offer attractive advantages. The key features of a magnetic sensing format include the use of commercially available magnetic field sensing elements, e.g. magnetoresistive sensors which bear huge potential for compact integration, a magnetic field sensing mechanism which is free from interference by complex biomedical samples, and an additional degree of freedom for the on-chip handling of biochemical species rendered by magnetic labels. In this review, we highlight the historical basis, routes, recent advances and applications of magnetic biosensing platform technologies based on magnetoresistive sensors.

Synergetic Effects of Combined Nanomaterials for Biosensing Applications

Nanomaterials have become essential components for the development of biosensors since such nanosized compounds were shown to clearly increase the analytical performance. The improvements are mainly related to an increased surface area, thus providing an enhanced accessibility for the analyte, the compound to be detected, to the receptor unit, the sensing element. Nanomaterials can also add value to biosensor devices due to their intrinsic physical or chemical properties and can even act as transducers for the signal capture. Among the vast amount of examples where nanomaterials demonstrate their superiority to bulk materials, the combination of different nano-objects with different characteristics can create phenomena which contribute to new or improved signal capture setups. These phenomena and their utility in biosensor devices are summarized in a non-exhaustive way where the principles behind these synergetic effects are emphasized.

Gene Specific DNA Sensors for Diagnosis of Pathogenic Infections

Gene specific DNA based sensors have potential applications for rapid and real time monitoring of hybridization signal with the target nucleic acid of pathogens. Different types of DNA based sensors and their applications have been studied for rapid and accurate detection of pathogens causing human diseases. These sensors are based on surface plasmon resonance, quantum-dots, molecular beacons, piezoelectric and electrochemical etc. Curbing epidemics at an early stage is one of the massive challenges in healthcare systems. Timely detection of the causative organism may provide a solution to restrain mortality caused by the disease. With the advent of interdisciplinary sciences, bioelectronics has emerged as an effective alternative for disease diagnostics. Gene specific DNA sensors present themselves as cost-effective, sensitive and specific platforms for detection of disease causing pathogens. The mini review explores different transducer based sensors and their potential in diagnosis of acute and chronic diseases.

Biomolecular engineering for nanobio/bionanotechnology

Biomolecular engineering can be used to purposefully manipulate biomolecules, such as peptides, proteins, nucleic acids and lipids, within the framework of the relations among their structures, functions and properties, as well as their applicability to such areas as developing novel biomaterials, biosensing, bioimaging, and clinical diagnostics and therapeutics. Nanotechnology can also be used to design and tune the sizes, shapes, properties and functionality of nanomaterials. As such, there are considerable overlaps between nanotechnology and biomolecular engineering, in that both are concerned with the structure and behavior of materials on the nanometer scale or smaller. Therefore, in combination with nanotechnology, biomolecular engineering is expected to open up new fields of nanobio/bionanotechnology and to contribute to the development of novel nanobiomaterials, nanobiodevices and nanobiosystems. This review highlights recent studies using engineered biological molecules (e.g., oligonucleotides, peptides, proteins, enzymes, polysaccharides, lipids, biological cofactors and ligands) combined with functional nanomaterials in nanobio/bionanotechnology applications, including therapeutics, diagnostics, biosensing, bioanalysis and biocatalysts. Furthermore, this review focuses on five areas of recent advances in biomolecular engineering: (a) nucleic acid engineering, (b) gene engineering, (c) protein engineering, (d) chemical and enzymatic conjugation technologies, and (e) linker engineering. Precisely engineered nanobiomaterials, nanobiodevices and nanobiosystems are anticipated to emerge as next-generation platforms for bioelectronics, biosensors, biocatalysts, molecular imaging modalities, biological actuators, and biomedical applications.

The protective effects of resveratrol, H2S and thermotherapy on the cell apoptosis induced by CdTe quantum dots

Quantum dots (QDs) could be used in the field of biology and medicine as excellent nano-scale fluorescent probes due to their unique optical properties, but the adverse effects of QDs are always the obstruction for its usage in living organisms. In this study, we observed that CdTe QDs exposure decreased the cell viability while increased the apoptosis rates in the L929 cells. Apart from QD-induced oxidative stress indicated by excessive ROS generation, three signal transductions, including Akt, p38 and JNK, played important roles on the regulation of cell apoptosis by CdTe QDs exposure as well. In order to reduce the toxicity of CdTe QDs, we explored the protective effects of three treatments, i.e. resveratrol, H₂S and thermotherapy at 43°C, against the cell apoptosis elicited by CdTe QDs. The results showed that resveratrol, H₂S and thermotherapy at 43°C were capable of attenuating cell apoptosis and intercellular ROS production through inhibiting signal pathways of Akt, p38 and JNK, respectively. As there is only limited number of exogenous treatments reported to diminish the toxicity of QDs, our findings will provide a novel insight for researchers who try to reduce or even eliminate the adverse health effects of QDs.

Advances on Aryldiazonium Salt Chemistry Based Interfacial Fabrication for Sensing Applications

Aryldiazonium salts as coupling agents for surface chemistry have evidenced their wide applications for the development of sensors. Combined with advances in nanomaterials, current trends in sensor science and a variety of particular advantages of aryldiazonium salt chemistry in sensing have driven the aryldiazonium salt-based sensing strategies to grow at an astonishing pace. This review focuses on the advances in the use of aryldiazonium salts for modifying interfaces in sensors and biosensors during the past decade. It will first summarize the current methods for modification of interfaces with aryldiazonium salts, and then discuss the sensing applications of aryldiazonium salts modified on different transducers (bulky solid electrodes, nanomaterials modified bulky solid electrodes, and nanoparticles). Finally, the challenges and perspectives that aryldiazonium salt chemistry is facing in sensing applications are critically discussed.

InN/InGaN quantum dot electrochemical devices: new solutions for energy and health

A review is given of the exceptional electrochemical performance of epitaxial InN/InGaN quantum dots (QDs) as photoelectrodes for solar hydrogen generation by water splitting, as biosensor transducers and as anion-selective electrodes, and they are also evaluated as supercapacitor electrodes. The performance is benchmarked against the best performances of other reported materials and nanostructures. A model based on the unique interplay of surface and quantum properties is put forward to understand the boost of catalytic activity and anion selectivity interlinking quantum nanostructure physics with electrochemistry and catalysis. Of equal impact is the direct growth on cheap Si substrates without any buffer layers, allowing novel device designs and integration with Si technology. This makes the InN/InGaN QDs viable, opening up new application fields for III-nitride semiconductors.

An Overview of Carbon Nanotubes and Graphene for Biosensing Applications

With the development of carbon nanomaterials in recent years, there has been an explosion of interests in using carbon nanotubes (CNTs) and graphene for developing new biosensors. It is believed that employing CNTs and graphene as sensor components can make sensors more reliable, accurate, and fast due to their remarkable properties. Depending on the types of target molecular, different strategies can be applied to design sensor device. This review article summarized the important progress in developing CNT- and graphene-based electrochemical biosensors, field-effect transistor biosensors, and optical biosensors. Although CNTs and graphene have led to some groundbreaking discoveries, challenges are still remained and the state-of-the-art sensors are far from a practical application. As a conclusion, future effort has to be made through an interdisciplinary platform, including materials science, biology, and electric engineering.

Recent advances in biosensor development for the detection of cancer biomarkers

Cancer is the second largest disease throughout the world with an increasing mortality rate over the past few years. The patient's survival rate is uncertain due to the limitations of cancer diagnosis and therapy. Early diagnosis of cancer is decisive for its successful treatment. A biomarker-based cancer diagnosis may significantly improve the early diagnosis and subsequent treatment. Biosensors play a crucial role in the detection of biomarkers as they are easy to use, portable, and can do analysis in real time. This review describes various biosensors designed for detecting nucleic acid and protein-based cancer biomarkers for cancer diagnosis. It mainly lays emphasis on different approaches to use electrochemical, optical, and mass-based transduction systems in cancer biomarker detection. It also highlights the analytical performances of various biosensor designs concerning cancer biomarkers in detail.

Nano-Biosensor for Monitoring the Neural Differentiation of Stem Cells

In tissue engineering and regenerative medicine, monitoring the status of stem cell differentiation is crucial to verify therapeutic efficacy and optimize treatment procedures. However, traditional methods, such as cell staining and sorting, are labor-intensive and may damage the cells. Therefore, the development of noninvasive methods to monitor the differentiation status in situ is highly desirable and can be of great benefit to stem cell-based therapies. Toward this end, nanotechnology has been applied to develop highly-sensitive biosensors to noninvasively monitor the neural differentiation of stem cells. Herein, this article reviews the development of noninvasive nano-biosensor systems to monitor the neural differentiation of stem cells, mainly focusing on optical (plasmonic) and eletrochemical methods. The findings in this review suggest that novel nano-biosensors capable of monitoring stem cell differentiation are a promising type of technology that can accelerate the development of stem cell therapies, including regenerative medicine.

Chitosan nanocomposites based on distinct inorganic fillers for biomedical applications

Chitosan (CHI), a biocompatible and biodegradable polysaccharide with the ability to provide a non-protein matrix for tissue growth, is considered to be an ideal material in the biomedical field. However, the lack of good mechanical properties limits its applications. In order to overcome this drawback, CHI has been combined with different polymers and fillers, leading to a variety of chitosan-based nanocomposites. The extensive research on CHI nanocomposites as well as their main biomedical applications are reviewed in this paper. An overview of the different fillers and assembly techniques available to produce CHI nanocomposites is presented. Finally, the properties of such nanocomposites are discussed with particular focus on bone regeneration, drug delivery, wound healing and biosensing applications.

Graphene and the immune system: Challenges and potentiality

In the growing area of nanomedicine, graphene-based materials (GBMs) are some of the most recent explored nanomaterials. For the majority of GBM applications in nanomedicine, the immune system plays a fundamental role. It is necessary to well understand the complexity of the interactions between GBMs, the immune cells, and the immune components and how they could be of advantage for novel effective diagnostic and therapeutic approaches. In this review, we aimed at painting the current picture of GBMs in the background of the immune system. The picture we have drawn looks like a cubist image, a sort of Picasso-like portrait looking at the topic from all perspectives: the challenges (due to the potential toxicity) and the potentiality like the conjugation of GBMs to biomolecules to develop advanced nanomedicine tools. In this context, we have described and discussed i) the impact of graphene on immune cells, ii) graphene as immunobiosensor, and iii) antibodies conjugated to graphene for tumor targeting. Thanks to the huge advances on graphene research, it seems realistic to hypothesize in the near future that some graphene immunoconjugates, endowed of defined immune properties, can go through preclinical test and be successfully used in nanomedicine.

Nanostructured Aptamer-Functionalized Black Phosphorus Sensing Platform for Label-Free Detection of Myoglobin, a Cardiovascular Disease Biomarker

We report the electrochemical detection of the redox active cardiac biomarker myoglobin (Mb) using aptamer-functionalized black phosphorus nanostructured electrodes by measuring direct electron transfer. The as-synthesized few-layer black phosphorus nanosheets have been functionalized with poly-l-lysine (PLL) to facilitate binding with generated anti-Mb DNA aptamers on nanostructured electrodes. This aptasensor platform has a record-low detection limit (∼0.524 pg mL(-1)) and sensitivity (36 μA pg(-1) mL cm(-2)) toward Mb with a dynamic response range from 1 pg mL(-1) to 16 μg mL(-1) for Mb in serum samples. This strategy opens up avenues to bedside technologies for multiplexed diagnosis of cardiovascular diseases in complex human samples.

Analysis Method for Quantifying the Morphology of Nanotube Networks

While atomic force microscopy (AFM) is a powerful technique for imaging assemblies and networks of nanoscale materials, approaches for quantitative assessment of the morphology of these materials are lacking. Here we present a volume-based approach for analyzing AFM images of assemblies of nano-objects that enables the extraction of relevant parameters describing their morphology. Random networks of single-walled carbon nanotubes (SWCNTs) deposited via solution-phase processing are used as an example to develop the method and demonstrate its utility. AFM imaging shows that the morphology of these networks depends on details of processing and is influenced by choice of substrate, substrate cleaning method, and postdeposition rinsing protocols. A method is outlined to analyze these images and extract relevant parameters describing the network morphology such as the density of SWCNTs and the degree to which tubes are bundled. Because this volume-based approach depends on accurate measurements of the height of individual tubes and their networks, a procedure for obtaining reliable height measurements is also discussed. Obtaining quantitative parameters that describe the network morphology allows going beyond qualitative descriptions of images and will facilitate optimizing network preparation methods based on measurable criteria and correlating performance with morphology.

A Cytochrome P450 3A4 Biosensor Based on Generation 4.0 PAMAM Dendrimers for the Detection of Caffeine

Cytochromes P450 (CYP, P450) are a large family of heme-active-site proteins involved in many catalytic processes, including steroidogenesis. In humans, four primary enzymes are involved in the metabolism of almost all xenobiotics. Among these enzymes, CYP3A4 is responsible for the inactivation of the majority of used drugs which makes this enzyme an interesting target for many fields of research, especially pharmaceutical research. Since the late 1970s, attempts have been made to construct and develop electrochemical sensors for the determination of substrates. This paper is concerned with the establishment of such a CYP3A4-containing biosensor. The sensor was constructed by adsorption of alternating layers of sub-nanometer gold particle-modified PAMAM (poly-amido-amine) dendrimers of generation 4.0, along with the enzyme by a layer-by-layer assembly technique. Atomic force microscopy (AFM), quartz crystal microbalance (QCM), and Fourier-transformed infrared spectroscopy (FTIR) were employed to elucidate the sensor assembly. Additionally, the biosensor was tested by cyclic voltammetry using caffeine as a substrate.

Electrochemical, Electrochemiluminescence, and Photoelectrochemical Aptamer-Based Nanostructured Sensors for Biomarker Analysis

Aptamer-based sensors have been intensively investigated as potential analytical tools in clinical analysis providing the desired portability, fast response, sensitivity, and specificity, in addition to lower cost and simplicity versus conventional methods. The aim of this review, without pretending to be exhaustive, is to give the readers an overview of recent important achievements about electrochemical, electrochemiluminescence, and photoelectrochemical aptasensors for the protein biomarker determination, mainly cancer related biomarkers, by selected recent publications. Special emphasis is placed on nanostructured-based aptasensors, which show a substantial improvement of the analytical performances.

3,4-Dihydroxyphenylalanine Peptides as Nonperturbative Quantum Dot Sensors of Aminopeptidase

Fluorescence-based assays for hydrolases that cleave within the substrate (endopeptidases) are common, while developing substrates for proteases that selectively cleave from peptide termini (exopeptidases) is more challenging, since the termini are specifically recognized by the enzyme and cannot be modified to facilitate a Förster resonance energy transfer (FRET)-based approach. The development of a robust system that enables the quenching of fluorescent particles by simple amino acid side chains would find broad utility for peptide sensors and would be advantageous for exopeptidases. Here we describe a quantum dot (QD)-based electron transfer (ET) sensor that is able to allow direct, quantitative monitoring of both exopeptidase and endopeptidase activity. The incorporation of 3,4-dihydroxyphenylalanine (DOPA) into the sequence of a peptide allows for the quenching of QD photoluminescence through an ET mechanism. DOPA is a nonproteinogenic amino acid that can replace a phenylalanine or tyrosine residue in a peptide sequence without severely altering structural properties, allowing for its introduction at multiple positions within a biologically active peptide substrate. Consequently, the quenching system presented here is ideally suited for incorporation into diverse peptide substrates for enzyme recognition, digestion, and activity sensing. Our findings suggest a broad utility of a small ET-capable amino acid side chain in detecting enzyme activity through ET-mediated QD luminescence quenching.

Versatile Route to Colloidal Stability and Surface Functionalization of Hydrophobic Nanomaterials

We introduce a general method for the stabilization and surface functionalization of hydrophobic nanoparticles using an amphiphilic copolymer, poly(maleic anhydride-alt-1-octadecene)-poly(ethylene glycol) methacrylate (PMAO-PEGMA). Coating nanoparticles with PMAO-PEGMA results in colloidally stable nanoparticles decorated with reactive carboxylic acid and methacrylate functionalities, providing a versatile platform for chemical reactions. The versatility and ease of surface functionalization is demonstrated by varying both the core material and the chemistry used. Specifically, the carboxylic acid functionalities are used to conjugate wheat germ agglutinin to conducting polymer nanoparticles via carbodiimide-mediated coupling, and the methacrylate groups are used to link cysteamine to the surface of poly(ε-caprolactone) nanoparticles via thiol-ene click chemistry and to link temperature-responsive polymer shells to the surface of gold nanoparticles via free radical polymerization.

Recent Advancements in Nanobioassays and Nanobiosensors for Foodborne Pathogenic Bacteria Detection

Bacterial pathogens are one of the leading causes of food safety incidents and product recalls worldwide. Timely detection and identification of microbial contamination in agricultural and food products is crucial for disease prevention and outbreak investigation. In efforts to improve and/or replace time-consuming and laborious "gold standards" for pathogen detection, numerous alternative rapid methods have been proposed in the past 15 years, with a trend toward incorporating nanotechnology and nanomaterials in food pathogen detection. This article is a review of the use of nanotechnology in various detection and sample preparation techniques and advancements in nanotechnology applications in food matrices. Some practical considerations in nanobioassay design are discussed, and the gaps between research status quo and market demands are identified.

A combinatorial approach to the repertoire of RNA kissing motifs; towards multiplex detection by switching hairpin aptamers

Loop–loop (also known as kissing) interactions between RNA hairpins are involved in several mechanisms in both prokaryotes and eukaryotes such as the regulation of the plasmid copy number or the dimerization of retroviral genomes. The stability of kissing complexes relies on loop parameters (base composition, sequence and size) and base combination at the loop–loop helix - stem junctions. In order to identify kissing partners that could be used as regulatory elements or building blocks of RNA scaffolds, we analysed a pool of 5.2 × 10⁶ RNA hairpins with randomized loops. We identified more than 50 pairs of kissing RNA hairpins. Two kissing motifs, 5′CCNY and 5′RYRY, generate highly stable complexes with K_Ds in the low nanomolar range. Such motifs were introduced in the apical loop of hairpin aptamers that switch between unfolded and folded state upon binding to their cognate target molecule, hence their name aptaswitch. The aptaswitch–ligand complex is specifically recognized by a second RNA hairpin named aptakiss through loop–loop interaction. Taking advantage of our kissing motif repertoire we engineered aptaswitch–aptakiss modules for purine derivatives, namely adenosine, GTP and theophylline and demonstrated that these molecules can be specifically and simultaneously detected by surface plasmon resonance or by fluorescence anisotropy.

Dual-excitation upconverting nanoparticle and quantum dot aptasensor for multiplexed food pathogen detection

In this report, a dual-excitation sensing method was developed using aptamer-functionalized quantum dots and upconverting nanoparticles, exhibiting Stokes and anti-Stokes type excitation profiles, respectively. Conjugation of the aptamer-functionalized luminescent nanoparticles with the magnetic beads, comprising short DNA sequences that were partially complementary to the aptamer sequences, enabled facile separation of the analyte-free conjugates for fluorescent measurement. UV-Visible spectroscopy, Circular Dichroism spectroscopy, Dynamic Light Scattering and Polyacrylamide Gel Electrophoresis techniques were used to characterize the aptamer probes developed. The target-specific luminescent conjugates were applied for multiplex detection of model food pathogens, Salmonella typhimurium, and Staphylococcus aureus, in which the fluorescent emission spectra were obtained under UV excitation at 325nm for quantum dots and NIR excitation at 980nm for upconverting nanoparticles, respectively. The dual-excitation strategy was aimed to minimize cross-talk between the luminescent signals for multiplexed detection, and yielded limit of detection values of 16 and 28cfumL(-1) for Staphylococcus aureus, and Salmonella typhimurium, respectively. By employing a greater number of quantum dots and upconverting nanoparticles with non-overlapping fluorescent emissions, the proposed methodology might be exploited further to detect several analytes, simultaneously.

A novel graphene-based label-free fluorescence 'turn-on' nanosensor for selective and sensitive detection of phosphorylated species in biological samples and living cells

A novel label-free fluorescence 'turn-on' nanosensor has been developed for highly selective and sensitive detection of phosphorylated species (Ps) in biological samples and living cells. The design strategy relies on the use of Ti(4+)-immobilized polydopamine (PDA) coated reduced graphene oxide (rGO@PDA-Ti(4+)) that serves as an attractive platform to bind riboflavin 5'-monophosphate molecules (FMNs) through ion-pair interactions between phosphate groups and Ti(4+). The as-prepared rGO@PDA-Ti(4+)-FMNs (nanosensor), fluoresce only weakly due to the ineffective Förster resonance energy transfer between the FMNs and rGO@PDA-Ti(4+). The experimental findings revealed that the microwave-assisted interaction of the nanosensor with α-, β-casein, ovalbumin, human serum, non-fat milk, egg white, and living cells (all containing Ps) releases FMNs (due to the high formation constant between phosphate groups and Ti(4+)), leading to an excellent fluorescence 'turn-on' response. The fluorescence spectroscopy, confocal microscopy, and MALDI-TOF MS spectrometry were used to detect Ps both qualitatively and quantitatively. Under the optimized conditions, the nanosensor showed a detection limit of ca. 118.5, 28.9, and 54.8 nM for the tryptic digests of α-, β-casein and ovalbumin, respectively. Furthermore, the standard addition method was used as a bench-mark proof for phosphopeptide quantification in egg white samples. We postulate that the present quantitative assay for Ps holds tremendous potential and may pave the way to disease diagnostics in the near future.

Review on photoacoustic imaging of the brain using nanoprobes

Photoacoustic (PA) tomography (PAT) is a hybrid imaging modality that integrates rich optical contrasts with a high-ultrasonic spatial resolution in deep tissue. Among various imaging applications, PA neuroimaging is becoming increasingly important as it nicely complements the limitations of conventional neuroimaging modalities, such as the low-temporal resolution in magnetic resonance imaging and the low depth-to-resolution ratio in optical microscopy/tomography. In addition, the intrinsic hemoglobin contrast PA neuroimaging has also been greatly improved by recent developments in nanoparticles (NPs). For instance, near-infrared absorbing NPs greatly enhanced the vascular contrast in deep-brain PAT; tumor-targeting NPs allowed highly sensitive and highly specific delineation of brain tumors; and multifunctional NPs enabled comprehensive examination of the brain through multimodal imaging. We aim to give an overview of NPs used in PA neuroimaging. Classifications of various NPs used in PAT will be introduced at the beginning, followed by an overview of PA neuroimaging systems, and finally we will discuss major applications of NPs in PA neuroimaging and highlight representative studies.

Nanomaterials for biocatalyst immobilization – state of the art and future trends

Advantages, drawbacks and trends in nanomaterials for enzyme immobilization.

Nanoparticle electrochemistry

This perspective article provides a survey of recent advances in nanoscale electrochemistry, with a brief theoretical background and a detailed discussion of experimental results of nanoparticle based electrodes, including the rapidly expanding field of “impact electrochemistry”.

A rapidly new-typed detection of norovirus based on F0F1-ATPase molecular motor biosensor

In order to adapt port rapid detection of food borne norovirus, presently we developed a new typed detection method based on F₀F₁-ATPase molecular motor biosensor. A specific probe was encompassed the conservative region of norovirus and F₀F₁-ATPase within chromatophore was constructed as a molecular motor biosensor through the "ε-subunit antibody-streptomycin-biotin-probe" system. Norovirus was captured based on probe-RNA specific binding. Our results demonstrated that the Limit of Quantification (LOQ) is 0.005 ng/mL for NV RNA and also demonstrated that this method possesses specificity and none cross-reaction for food borne virus. What's more, the experiment used this method could be accomplished in 1 h. We detected 10 samples by using this method and the results were consistent with RT-PCR results. Overall, based on F₀F₁-ATPase molecular motors biosensor system we firstly established a new typed detection method for norovirus detection and demonstrated that this method is sensitive and specific and can be used in the rapid detection for food borne virus.

Nanobiosensors in diagnostics

Medical diagnosis has been greatly improved thanks to the development of new techniques capable of performing very sensitive detection and quantifying certain parameters. These parameters can be correlated with the presence of specific molecules and their quantity. Unfortunately, these techniques are demanding, expensive, and often complicated. On the other side, progress in other fields of science and technology has contributed to the rapid growth of nanotechnology. Although being an emerging discipline, nanotechnology has raised huge interest and expectations. Most of the enthusiasm comes from new possibilities and properties of nanomaterials. Biosensors (simple, robust, sensitive, cost-effective) combined with nanomaterials, also called nanobiosensors, are serving as bridge between advanced detection/diagnostics and daily/routine tests. Here we review some of the latest applications of nanobiosensors in diagnostics field.

Role of functionalization: strategies to explore potential nano-bio applications of magnetic nanoparticles

Strategies to bridge the gap between magnetic nanoparticles for their nano bio applications.

Novel reduced graphene oxide–glycol chitosan nanohybrid for the assembly of an amperometric enzyme biosensor for phenols

A sensitive laccase biosensor for phenols based on a novel graphene oxide–glycol chitosan nanohybrid.

Fluorescent Reporters and Biosensors for Probing the Dynamic Behavior of Protein Kinases

Probing the dynamic activities of protein kinases in real-time in living cells constitutes a major challenge that requires specific and sensitive tools tailored to meet the particular demands associated with cellular imaging. The development of genetically-encoded and synthetic fluorescent biosensors has provided means of monitoring protein kinase activities in a non-invasive fashion in their native cellular environment with high spatial and temporal resolution. Here, we review existing technologies to probe different dynamic features of protein kinases and discuss limitations where new developments are required to implement more performant tools, in particular with respect to infrared and near-infrared fluorescent probes and strategies which enable improved signal-to-noise ratio and controlled activation of probes.

Adjusting diffraction spectrum of an echelon-like grating influenced by surface plasmon of nanomaterials

This article aims to study the varying diffraction spectrum phenomenon influenced by surface plasmon of nanomaterials. Experiments used silver nanoparticles to build the echelon-like grating as test samples, where the grating spacing of line pattern is 10 μm and within the width of silver nanoparticles line is 5 μm alternately. In this work, the silver stripes with gradient thickness were first formed line pattern alternately with glancing angle deposition and photolithography, and then annealed at temperature of 250 °C for 3 mins to fabricate the silver nanoparticles as bowl-like forms. Thicknesses of the silver nanoparticles in the echelon-like grating increase from 0 nm to 40 nm and their diameters grow from 0 nm to 35 nm with quasilinear increment simultaneously. Analyzing the varying diffraction spectrum was focused on observing the first order diffraction by changing the beam size and the probe position of the incident light. The significant results show that the bigger the incident light beam size, the larger the peak wavelength difference (Δλ) of the two first order diffractions. Moreover, the peak spectrum is shifted to long wavelength and Δλ is diminished by probing area with big size of nanoparticles.

Carbon nanotube biosensors

Nanomaterials possess unique features which make them particularly attractive for biosensing applications. In particular, carbon nanotubes (CNTs) can serve as scaffolds for immobilization of biomolecules at their surface, and combine several exceptional physical, chemical, electrical, and optical characteristics properties which make them one of the best suited materials for the transduction of signals associated with the recognition of analytes, metabolites, or disease biomarkers. Here we provide a comprehensive review on these carbon nanostructures, in which we describe their structural and physical properties, functionalization and cellular uptake, biocompatibility, and toxicity issues. We further review historical developments in the field of biosensors, and describe the different types of biosensors which have been developed over time, with specific focus on CNT-conjugates engineered for biosensing applications, and in particular detection of cancer biomarkers.