Chitins and chitosans for the repair of wounded skin, nerve, cartilage and bone

Synthesis and characterization of selenium-chondroitin sulfate nanoparticles

A novel selenium-chondroitin sulfate (SeCS) was synthesized by ultrasonic and dialysis method. With characterization by FTIR, XRD and TEM, the SeCS was found to form nanoparticles in distilled water through a self-aggregation progress. The SeCS nanoparticles had sizes between 30 and 200 nm with selenium entrapment efficiency of about 10.1%. The anti-toxin capacity of SeCS nanoparticles was demonstrated through MTT and apoptosis assays in vitro. Results indicated that the SeCS was less cytotoxic to chondrocytes than sodium selenite. In particular, the SeCS could obviously alleviate chondrocyte apoptosis induced by T-2 toxin compared to chondroitin sulfate. These results thus represent an advanced understanding of the properties of SeCS nanoparticles and demonstrate their exciting potential applications in therapy of Kashin-Beck disease (KBD) and osteoarthritis.

Flexible and microporous chitosan hydrogel/nano ZnO composite bandages for wound dressing: in vitro and in vivo evaluation

Current wound dressings have disadvantages such as less flexibility, poor mechanical strength, lack of porosity, and a tendency for dressings to adhere onto the wound surface; in addition, a majority of the dressings did not possess antibacterial activity. Hydrogel-based wound dressings would be helpful to provide a cooling sensation and a moisture environment, as well as act as a barrier to microbes. To overcome these hassles, we have developed flexible and microporous chitosan hydrogel/nano zinc oxide composite bandages (CZBs) via the incorporation of zinc oxide nanoparticles (nZnO) into chitosan hydrogel. The prepared nanocomposite bandages were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), and scanning electron microscopy (SEM). In addition, swelling, degradation, blood clotting, antibacterial, cytocompatibility, cell attachment on the material, and cell infiltration into the composite bandages were evaluated. The nanocomposite bandage showed enhanced swelling, blood clotting, and antibacterial activity. Cytocompatibility of the composite bandage has been analyzed in normal human dermal fibroblast cells. Cell attachment and infiltration studies showed that the cells were found attached to the nanocomposite bandages and penetrated into the interior. Furthermore, the in vivo evaluations in Sprague-Dawley rats revealed that these nanocomposite bandages enhanced the wound healing and helped for faster re-epithelialization and collagen deposition. The obtained data strongly encourage the use of these composite bandages for burn wounds, chronic wounds, and diabetic foot ulcers.

Mining of unexplored habitats for novel chitinases--chiA as a helper gene proxy in metagenomics

The main objective of this study was to assess the abundance and diversity of chitin-degrading microbial communities in ten terrestrial and aquatic habitats in order to provide guidance to the subsequent exploration of such environments for novel chitinolytic enzymes. A combined protocol which encompassed (1) classical overall enzymatic assays, (2) chiA gene abundance measurement by qPCR, (3) chiA gene pyrosequencing, and (4) chiA gene-based PCR-DGGE was used. The chiA gene pyrosequencing is unprecedented, as it is the first massive parallel sequencing of this gene. The data obtained showed the existence across habitats of core bacterial communities responsible for chitin assimilation irrespective of ecosystem origin. Conversely, there were habitat-specific differences. In addition, a suite of sequences were obtained that are as yet unregistered in the chitinase database. In terms of chiA gene abundance and diversity, typical low-abundance/diversity versus high-abundance/diversity habitats was distinguished. From the combined data, we selected chitin-amended agricultural soil, the rhizosphere of the Arctic plant Oxyria digyna and the freshwater sponge Ephydatia fluviatilis as the most promising habitats for subsequent bioexploration. Thus, the screening strategy used is proposed as a guide for further metagenomics-based exploration of the selected habitats.

Ulvan and ulvan/chitosan polyelectrolyte nanofibrous membranes as a potential substrate material for the cultivation of osteoblasts

A new generation of biomaterials composed of the natural polysaccharides, ulvans extracted from the green seaweed Ulva rigida and chitosan have been investigated. Ulvan, chitosan alone and ulvan/chitosan polyelectrolyte membranes have been synthesised and characterised. The structure of the membranes was altered by the weight ratio of the polyion components. Fibrous and nanofibrous morphology was created, in accordance with a supramolecular self assembly. ATR-FTIR measurements suggested the presence of both polycationic chitosan and polyanionic ulvan in the polyelectrolyte membranes. The cytocompatibility of these new materials was examined by fluorescence microscopy. The results show that ulvan as well as ulvan/chitosan membranes promoted the attachment and proliferation of 7F2 osteoblasts and maintained the cell morphology and viability. Thus, ulvan and chitosan which possess unique properties might have high impact in biomedical applications as potential scaffold materials.

Multilayer Films Electrodes Consisted of Cashew Gum and Polyaniline Assembled by the Layer-by-Layer Technique: Electrochemical Characterization and Its Use for Dopamine Determination

We take advantage of polyelectrolyte feature exhibited by natural cashew gum (Anacardium occidentale L.) (CG), found in northeast Brazil, to employ it in the formation of electroactive nanocomposites prepared by layer-by-layer (LbL) technique. We used polyaniline unmodified (PANI) or modified with phosphonic acid (PA), PANI-PA as cationic polyelectrolyte. On the other hand, the CG or polyvinyl sulfonic (PVS) acids were used as anionic polyelectrolytes. The films were prepared with PANI or PANI-PA intercalated with CG or with PVS alternately resulting in four films with different sequences: PANI/CG PANI-PA/CG, PANI/PVS and PANI-PA/PVS, respectively. Analysis by cyclic voltammetry (CV) of the films showed that the presence of gum increases the stability of the films in acidic medium. The performance of the modified electrode of PANI-PA/CG was evaluated in electro analytical determination of dopamine (DA). The tests showed great sensitivity of the film for this analyte that was detected at 10⁻⁵ mol L⁻¹.

A novel injectable chitosan/polyglutamate polyelectrolyte complex hydrogel with hydroxyapatite for soft-tissue augmentation

This study demonstrated a chitosan (CS)/polyglutamate (PG) polyelectrolyte complex (PEC) hydrogel combined with spherical hydroxyapatite (HAp) particles as an injectable dermal filler for soft-tissue augmentation. The CS/PG PEC hydrogel with oppositely charged ionic cross-linking, a high gel content, and low degradation rate was introduced as a carrier to achieve high shape and volume stability. An MTT assay indicated that the CS/PG PEC had satisfactory cell biocompatibility. This PEC/HAp hydrogel showed good structural integrity in a PBS solution for up to 60 days. Clinical manageability was indexed by an injection force measurement through sterile 27-gauge needles using a texture analyzer. In an animal study, 0.2 mL of the PEC and PEC/hydroxyapatite (HAp) were implanted within the dorsal dermis of a swine ear. Injected tissue areas were biopsied 2 weeks, and 2 and 6 months after the injection. According to the histomorphometric results, the PEC and PEC/HAp groups showed percentages of retention of the maximum height of the cross-section of about 44% and 73% at 6 months. New collagen was observed in the central position indicating a possible collagenesis effect. These results suggest that this PEC/HAp system can be used as an alternative for soft-tissue augmentation.

Development of chitosan-tripolyphosphate non-woven fibrous scaffolds for tissue engineering application

The fibrous scaffolds are promising for tissue engineering applications because of their close structural resemblance with native extracellular matrix. Additionally, the chemical composition of scaffold is also an important consideration as they have significant influences on modulating cell attachment, morphology and function. In this study, chitosan-tripolyphosphate (TPP) non-woven fibrous scaffolds were prepared through wetspinning process. Interestingly, at physiological pH these scaffolds release phosphate ions, which have significant influences on cellular function. For the first time, cell viability in presence of varying concentration of sodium TPP solution was analyzed and correlated with the phosphate release from the scaffolds during 30 days incubation period. In vitro degradation of the chitosan-TPP scaffolds was higher than chitosan scaffolds, which may be due to decrease in crystallinity as a result of instantaneous ionic cross-linking during fiber formation. The scaffolds with highly interconnected porous structure present a remarkable cytocompatibility for cell growing, and show a great potential for tissue engineering applications.

Nano-hybrid carboxymethyl-hexanoyl chitosan modified with (3-aminopropyl)triethoxysilane for camptothecin delivery

Silane-modified amphiphilic chitosan was synthesized by anchoring a silane coupling agent, (3-aminopropyl)triethoxysilane, to a novel amphiphilic carboxymethyl-hexanoyl chitosan (CHC). The chemical structure of this new organic-inorganic hybrid molecule was characterized by FTIR and 13C-, 29Si-nuclear magnetic resonance, while the structural evolution was examined using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and dynamic light scattering (DLS). Experimental results indicated a self-assembly behaviour of molecules into nanoparticles with a stable polygonal geometry, consisting of ordered silane layers of 6 nm in thickness. The self-assembly property was found to be influenced by chemical composition and concentration of silane incorporated, while the size can be varied by the amount of anchored silane. It was also demonstrated that such vesicle exhibited excellent cytocompatibility and cellular internalization capability in ARPE-19 cell line, and presented well-controlled encapsulation and release profiles for (S)-(+)-camptothecin. These unique properties render it as a potential drug delivery nanosystem.

Inhibition of angiogenesis by chitooligosaccharides with specific degrees of acetylation and polymerization

Chitooligosaccharides (CHOS) inhibit angiogenesis and may be used in the treatment of cancer tumors. We have studied the effect of the fraction of acetylation (FA) and the degree of polymerization (DP) on CHOS anti-angiogenic activity. We tested enzymatically produced CHOS-mixtures with FA0.15, FA0.3 and FA0.6, and DP≤12 in initial experiments with chorioallantoic membranes. All of the samples reduced the formation of new blood vessels, CHOS with FA0.3 giving the best effect. Single-DP fractions from the FA0.3 sample purified by size-exclusion chromatography (DP3-DP12) were then tested for inhibition of migration of human endothelial cells, which is an important element of the angiogenesis process. All of the fractions inhibited migration, meaning that, within the DP area tested in this study, FA is more important than DP for the effect. Generally, the results reveal that DP3-DP12 CHOS have considerable potential as anti-angiogenic compounds.

Novel Technique of Polymer Composite Preparation for Bone Implants

Extensive interest in bone tissue engineering focuses on bio-degradable materials based on natural polymers. One of these polymers is chitosan which is deacetylated derivative of chitin. The paper presents preparation of chitosan scaffolds containing collagen and hydroxyapatite by electrolytic method. Chitosan dissolved in acetic acid forms chitosan acetate which is polyelectrolyte (protonated group NH3+). The flow of current through a solution of chitosan acetate causes its reduction and accumulation of chitosan on cathode. Formed structure is highly hydrated porous hydrogel. Hydrogel structure can be coated (in the process of electrodeposition) by nano-silver having a bactericidal effect. Subsequently hydrogel was frozen at -37°C for 24h and freeze-drying. Obtained scaffold has a high porosity (more than 88%) with average pore size of about 0.1-3 μm (micropores) and 0,1- few millimeters (macropores).

Physiological cartilage tissue engineering effect of oxygen and biomechanics

In vitro engineering of cartilaginous tissues has been studied for many years, and tissue-engineered constructs are sought to be used clinically for treating articular cartilage defects. Even though there is a plethora of studies and data available, no breakthroughs have been achieved yet that allow for implanting in vivo cultured articular cartilaginous tissues in patients. A review of contributions to cartilage tissue engineering over the past decades emphasizes that most of the studies were performed under environmental conditions neglecting the physiological situation. This is specifically pronounced in the use of bioreactor systems which neither allow for application of near physiomechanical stimulations nor for controlling a hypoxic environment as it is experienced in synovial joints. It is suspected that the negligence of these important parameters has slowed down progress and prevented major breakthroughs in the field. This review focuses on the main aspects of cartilage tissue engineering with emphasis on the relation and understanding of employing physiological conditions.

Thrombin production and human neutrophil elastase sequestration by modified cellulosic dressings and their electrokinetic analysis

Wound healing is a complex series of biochemical and cellular events. Optimally, functional material design addresses the overlapping acute and inflammatory stages of wound healing based on molecular, cellular, and bio-compatibility issues. In this paper the issues addressed are uncontrolled hemostasis and inflammation which can interfere with the orderly flow of wound healing. In this regard, we review the serine proteases thrombin and elastase relative to dressing functionality that improves wound healing and examine the effects of charge in cotton/cellulosic dressing design on thrombin production and elastase sequestration (uptake by the wound dressing). Thrombin is central to the initiation and propagation of coagulation, and elastase is released from neutrophils that can function detrimentally in a stalled inflammatory phase characteristic of chronic wounds. Electrokinetic fiber surface properties of the biomaterials of this study were determined to correlate material charge and polarity with function relative to thrombin production and elastase sequestration. Human neutrophil elastase sequestration was assessed with an assay representative of chronic wound concentration with cotton gauze cross-linked with three types of polycarboxylic acids and one phosphorylation finish; thrombin production, which was assessed in a plasma-based assay via a fluorogenic peptide substrate, was determined for cotton, cotton-grafted chitosan, chitosan, rayon/polyester, and two kaolin-treated materials including a commercial hemorrhage control dressing (QuickClot Combat Gauze). A correlation in thrombin production to zeta potential was found. Two polycarboxylic acid cross linked and a phosphorylated cotton dressing gave high elastase sequestration.

Silver nanoparticles as real topical bullets for wound healing

Nanotechnology is on the threshold of providing a host of new materials and approaches, revolutionizing the medical and pharmaceutical fields. Several areas of medical care are already profiting from the advantage that nanotechnology offers. Recently, silver nanoparticles are attracting interest for a clinical application because of its potential biological properties such as antibacterial activity, anti-inflammatory effects, and wound healing efficacy, which could be exploited in developing better dressings for wounds and ulcers. This article reviews the role of silver nanoparticles in wound healing.

Biomimetic chitosan-calcium phosphate composites with potential applications as bone substitutes: preparation and characterization

A novel biomimetic technique for obtaining chitosan-calcium phosphates (Cs-CP) scaffolds are presented: calcium phosphates are precipitated from its precursors, CaCl(2) and NaH(2) PO(4) on the Cs matrix, under physiological conditions (human body temperature and body fluid pH; 37°C and pH = 7.2, respectively). Materials composition and structure have been confirmed by various techniques: elemental analysis, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), and scanning electron microscopy (SEM). FTIR and SEM data have shown the arrangement of the calcium phosphates-hydroxyapatite (CP-Hap) onto Cs matrix. In this case the polymer is acting as glue, bonding the calcium phosphates crystals. Behavior in biological simulated fluids (phosphate buffer solution-PBS and PBS-albumin) revealed an important contribution of the chelation between -NH3(+) and Ca(2+) on the scaffold interaction with aqueous mediums; increased quantities of chitosan in composites permit the interaction with human albumin and improve the retention of fluid. The composites are slightly degraded by the lysozyme which facilitates an in vivo degradation control of bone substitutes. Modulus of elasticity is strongly dependent of the ratio chitosan/calcium phosphates and recommends the obtained biomimetic composites as promising materials for a prospective bone application.

Fabrication and biocompatibility of novel bilayer scaffold for skin tissue engineering applications

In this study, a novel bilayer scaffold composed of electrospun polycaprolactone and poly(lacto-co-glycolic acid) (PCL/PLGA) membrane and glutaraldehyde (3.5% v/v) cross-linked chitosan/gelatin hydrogel was fabricated using two methods: electrospinning of the membrane onto the lyophilized hydrogel (BS-1) and membrane underlaying and casting method (BS-2). The morphology of the fabricated scaffolds was examined by scanning electron microscope (SEM). Mechanical strength, porosity, swelling capacity, and biodegradation rates of the scaffolds were also characterized. The in vitro biocompatibility of the materials was investigated by assessing cytotoxicity and cell proliferation on the material was measured using MTT assay. In addition, cell adhesion on the material was investigated by SEM. The BS-2 was grafted in Sprague-Dawley rats to determine its in vivo behavior and biocompatibility. The experimental results showed that the addition of the membrane layer to the hydrogel decreased swelling and degradation rates and provided ease of handling during implantation. Grafted BS-2 showed normal wound healing and no major inflammatory reaction was observed.

Hydroxyapatite-coated carboxymethyl chitosan scaffolds for promoting osteoblast and stem cell differentiation

The behavior of MC3T3 osteoblasts and human bone marrow stem cells on non-coated and hydroxyapatite (HAP)-coated carboxymethyl chitosan (CMCS) scaffolds was investigated in this study. Four HAP-coated scaffolds with different coating morphology and coverage were prepared by mineralization for 1week in four different mineralizing solutions. Viability, attachment, proliferation, and differentiation of the osteoblasts on these scaffolds were evaluated, and an osteogenic gene expression analysis was carried out to investigate the osteoblastic differentiation of the stem cells. No cytotoxic effects were observed with both the non-coated and coated scaffolds. The non-coated CMCS scaffold supports attachment, proliferation, and differentiation of the osteoblasts and directs stem cell differentiation to osteoblast. Coating the scaffold with HAP substantially enhances these effects on the osteoblasts and stem cells. The main improvement was in the late stage of osteoblast differentiation since osteoblastic differentiation of the osteoblasts and stem cells in this stage was significantly enhanced by the coatings regardless of the variation in morphology and coverage. On the other hand, high HAP coverage was beneficial in stimulating osteoblast attachment and proliferation. This study demonstrates the good potential of HAP-coated CMCS scaffolds as osteogenic scaffolds to stimulate bone healing.

Preparation and characterization of electrospun PCL/PLGA membranes and chitosan/gelatin hydrogels for skin bioengineering applications

In this study, two distinct systems of biomaterials were fabricated and their potential use as a bilayer scaffold (BS) for skin bioengineering applications was assessed. The initial biomaterial was a polycaprolactone/poly(lacto-co-glycolic acid) (PCL/PLGA) membrane fabricated using the electrospinning method. The PCL/PLGA membrane M-12 (12% PCL/10% PLGA, 80:20) displayed strong mechanical properties (stress/strain values of 3.01 ± 0.23 MPa/225.39 ± 7.63%) and good biocompatibility as demonstrated by adhesion of keratinocyte cells on the surface and ability to support cell proliferation. The second biomaterial was a hydrogel composed of 2% chitosan and 15% gelatin (50:50) crosslinked with 5% glutaraldehyde. The CG-3.5 hydrogel (with 3.5% glutaraldehyde (v/v)) displayed a high porosity, ≥97%, good compressive strength (2.23 ± 0.25 MPa), ability to swell more than 500% of its dry weight and was able to support fibroblast cell proliferation. A BS was fabricated by underlaying the membrane and hydrogel casting method to combine these two materials. The physical properties and biocompatibility were preliminarily investigated and the properties of the two biomaterials were shown to be complementary when combined. The upper layer membrane provided mechanical support in the scaffold and reduced the degradation rate of the hydrogel layer. Cell viability was similar to that in the hydrogel layer which suggests that addition of the membrane layer did not affect the biocompatibility.

Biomedical exploitation of chitin and chitosan via mechano-chemical disassembly, electrospinning, dissolution in imidazolium ionic liquids, and supercritical drying

Recently developed technology permits to optimize simultaneously surface area, porosity, density, rigidity and surface morphology of chitin-derived materials of biomedical interest. Safe and ecofriendly disassembly of chitin has superseded the dangerous acid hydrolysis and provides higher yields and scaling-up possibilities: the chitosan nanofibrils are finding applications in reinforced bone scaffolds and composite dressings for dermal wounds. Electrospun chitosan nanofibers, in the form of biocompatible thin mats and non-wovens, are being actively studied: composites of gelatin + chitosan + polyurethane have been proposed for cardiac valves and for nerve conduits; fibers are also manufactured from electrospun particles that self-assemble during subsequent freeze-drying. Ionic liquids (salts of alkylated imidazolium) are suitable as non-aqueous solvents that permit desirable reactions to occur for drug delivery purposes. Gel drying with supercritical CO₂ leads to structures most similar to the extracellular matrix, even when the chitosan is crosslinked, or in combination with metal oxides of interest in orthopedics.

Osteoid-mimicking dense collagen/chitosan hybrid gels

Bone extracellular matrix (ECM) is a 3D network, composed of collagen type I and a number of other macromolecules, including glycosaminoglycans (GAGs), which stimulate signaling pathways that regulate osteoblast growth and differentiation. To model the ECM of bone for tissue regenerative approaches, dense collagen/chitosan (Coll/CTS) hybrid hydrogels were developed using different proportions of CTS to mimic GAG components of the ECM. MC3T3-E1 mouse calvaria preosteoblasts were seeded within plastically compressed Coll/CTS hydrogels with solid content approaching that of native bone osteoid. Dense, cellular Coll/CTS hybrids were maintained for up to 8 weeks under either basal or osteogenic conditions. Higher CTS content significantly increased gel resistance to collagenase degradation. The incorporation of CTS to collagen gels decreased the apparent tensile modulus from 1.82 to 0.33 MPa. In contrast, the compressive modulus of Coll/CTS hybrids increased in direct proportion to CTS content exhibiting an increase from 23.50 to 55.25 kPa. CTS incorporation also led to an increase in scaffold resistance to cell-induced contraction. MC3T3-E1 viability, proliferation, and matrix remodeling capability (via matrix metalloproteinase expression) were maintained. Alkaline phosphatase activity was increased up to two-fold, and quantification of phosphate mineral deposition was significantly increased with CTS incorporation. Thus, dense Coll/CTS scaffolds provide osteoid-like models for the study of osteoblast differentiation and bone tissue engineering.

Sodium hyaluronate/chitosan polyelectrolyte complex scaffolds for dental pulp regeneration: synthesis and characterization

In the present study, small-sized porous scaffolds were obtained from the freeze-drying of sodium hyaluronate/chitosan polyelectrolyte complexes. The obtained materials were characterized by a set of techniques including attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, swelling determination and weight loss studies. The morphology of the scaffolds was observed using scanning electron microscopy. Thermal characterization of the scaffolds was also performed by dynamic mechanical thermal analysis and thermogravimetric analysis. Finally, the cytotoxic profile of the prepared scaffolds was evaluated in vitro, using mesenchymal stem cells. The results obtained showed that cells adhered to scaffolds and proliferated. This study also confirmed that the degradation by-products of sodium hyaluronate/chitosan scaffold are noncytotoxic, which is fundamental for its application in the biomedical field.