Mutation detection and single-molecule counting using isothermal rolling-circle amplification

SNP genotyping: technologies and biomedical applications

Single nucleotide polymorphisms (SNPs) are the most frequently occurring genetic variation in the human genome, with the total number of SNPs reported in public SNP databases currently exceeding 9 million. SNPs are important markers in many studies that link sequence variations to phenotypic changes; such studies are expected to advance the understanding of human physiology and elucidate the molecular bases of diseases. For this reason, over the past several years a great deal of effort has been devoted to developing accurate, rapid, and cost-effective technologies for SNP analysis, yielding a large number of distinct approaches. This article presents a review of SNP genotyping techniques and examines their principles of genotype determination in terms of allele differentiation strategies and detection methods. Further, several current biomedical applications of SNP genotyping are discussed.

In situ detection of non-polyadenylated RNA molecules using Turtle Probes and target primed rolling circle PRINS

BACKGROUND

In situ detection is traditionally performed with long labeled probes often followed by a signal amplification step to enhance the labeling. Whilst short probes have several advantages over long probes (e.g. higher resolution and specificity) they carry fewer labels per molecule and therefore require higher amplification for detection. Furthermore, short probes relying only on hybridization for specificity can result in non-specific signals appearing anywhere the probe attaches to the target specimen. One way to obtain high amplification whilst minimizing the risk of false positivity is to use small circular probes (e.g. Padlock Probes) in combination with target primed rolling circle DNA synthesis. This has previously been used for DNA detection in situ, but not until now for RNA targets.

RESULTS

We present here a proof of principle investigation of a novel rolling circle technology for the detection of non-polyadenylated RNA molecules in situ, including a new probe format (the Turtle Probe) and optimized procedures for its use on formalin fixed paraffin embedded tissue sections and in solid support format applications.

CONCLUSION

The method presented combines the high discriminatory power of short oligonucleotide probes with the impressive amplification power and selectivity of the rolling circle reaction, providing excellent signal to noise ratios in combination with exact target localization due to the target primed reaction. Furthermore, the procedure is easily multiplexed, allowing visualization of several different RNAs.

An autonomous fueled machine that replicates catalytic nucleic acid templates for the amplified optical analysis of DNA

Here we describe a protocol for the amplified detection of a target DNA using a DNA/FokI-based replicating cutting machine. The protocol is based on the design of a sensing hairpin oligonucleotide that is opened upon hybridization with the analyte DNA. The endonuclease FokI binds to the double-stranded complex and cleaves it to a "cutter" unit. The "cutter" unit reacts with a fuel oligonucleotide to generate and amplify the signal. The fuel molecule is an oligonucleotide in a hairpin configuration with a fluorophore/quencher pair attached to the 5' and 3' ends. Formation of the duplex between the cutter and the fuel leads to the scission of the duplex by FokI, leading to a second, replicated "cutter", a fluorescent waste product, and to the regeneration of the original "cutter" unit. The autonomous replication of the "cutter" unit, as a result of the primary recognition of the analyte DNA, leads to the amplified fluorescent detection of the analyte DNA with a sensitivity limit of 1 x 10(-14) M. The operation of the machine and the sensing process are monitored by the fluorescence generated by the waste product. Here we apply the protocol, which takes about 2 h to complete, to analyze a Tay-Sachs genetic disorder mutant DNA.

Connector inversion probe technology: a powerful one-primer multiplex DNA amplification system for numerous scientific applications

We combined components of a previous assay referred to as Molecular Inversion Probe (MIP) with a complete gap filling strategy, creating a versatile powerful one-primer multiplex amplification system. As a proof-of-concept, this novel method, which employs a Connector Inversion Probe (CIPer), was tested as a genetic tool for pathogen diagnosis, typing, and antibiotic resistance screening with two distinct systems: i) a conserved sequence primer system for genotyping Human Papillomavirus (HPV), a cancer-associated viral agent and ii) screening for antibiotic resistance mutations in the bacterial pathogen Neisseria gonorrhoeae. We also discuss future applications and advances of the CIPer technology such as integration with digital amplification and next-generation sequencing methods. Furthermore, we introduce the concept of two-dimension informational barcodes, i.e. “multiplex multiplexing padlocks” (MMPs). For the readers' convenience, we also provide an on-line tutorial with user-interface software application CIP creator 1.0.1, for custom probe generation from virtually any new or established primer-pairs.

Molecular beacons for isothermal fluorescence enhancement by the cleavage of RNase HII from Chlamydia pneumoniae

This article describes a new assay for isothermal enhancement of fluorescence intensity. The assay is based on the cleavage of duplexes formed by the chimeric DNA-rN(1)-DNA molecular beacon (cMB) and target DNA with Chlamydia pneumoniae RNase HII (CpRNase HII). The loop sequence of the cMB, which was designed according to the target sequence, contains a single ribonucleotide. The combination of CpRNase HII cleavage and cMB (RHMB) permitted a 90-fold increase in fluorescence intensity change compared with the hybridization reaction in the presence of the same amount of target DNA. These results indicate that the RHMB assay can enhance the fluorescence signal in real-time monitoring of the target DNA.

Sequence specific detection of DNA using nicking endonuclease signal amplification (NESA)

We have developed a new method for identifying specific single- or double-stranded DNA sequences called nicking endonuclease signal amplification (NESA). A probe and target DNA anneal to create a restriction site that is recognized by a strand-specific endonuclease that cleaves the probe into two pieces leaving the target DNA intact. The target DNA can then act as a template for fresh probe and the process of hybridization, cleavage and dissociation repeats. Laser-induced fluorescence coupled with capillary electrophoresis was used to measure the probe cleavage products. The reaction is rapid; full cleavage of probe occurs within one minute under ideal conditions. The reaction is specific since it requires complete complementarity between the oligonucleotide and the template at the restriction site and sufficient complementarity overall to allow hybridization. We show that both Bacillus subtilis and B. anthracis genomic DNA can be detected and specifically differentiated from DNA of other Bacillus species. When combined with multiple displacement amplification, detection of a single copy target from less than 30 cfu is possible. This method should be applicable whenever there is a requirement to detect a specific DNA sequence. Other applications include SNP analysis and genotyping. The reaction is inherently simple to multiplex and is amenable to automation.

Botulism diagnostics: from clinical symptoms to in vitro assays

Botulinum neurotoxin (BoNT), which cause the deadly neuroparalytic disease, botulism, is the most toxic substance known to man. BoNT can be used as potential bioterrorism agents, and therefore, pose great threat to national security and public health. Rapid and sensitive detection of BoNTs using molecular and biochemical techniques is an essential component in the diagnosis of botulism, and is yet to be achieved. The most sensitive and widely accepted assay method for BoNTs is mouse bioassay, which takes 4 days to complete. This clearly can not meet the need for clinical diagnosis of botulism, botulinum detection in field conditions, and screening of large scale samples. Consequently, the clinical diagnosis of botulism relies on the clinical symptom development, thus limiting the effectiveness of antitoxin treatment. In response to this critical need, many in vitro methods for BoNT detection are under development. This review is focused on recently developed in vitro detection methods for BoNTs, and emerging new technologies with potential for sensitive and rapid in vitro diagnostics for botulism.

Detection of DNA copy number alterations in cancer by array comparative genomic hybridization

Over the past few years, various reliable platforms for high-resolution detection of DNA copy number changes have become widely available. Together with optimized protocols for labeling and hybridization and algorithms for data analysis and representation, this has lead to a rapid increase in the application of this technology in the study of copy number variation in the human genome in normal cells and copy number imbalances in genetic diseases, including cancer. In this review, we briefly discuss specific technical issues relevant for array comparative genomic hybridization analysis in cancer tissues. We specifically focus on recent successes of array comparative genomic hybridization technology in the progress of our understanding of oncogenesis in a variety of cancer types. A third section highlights the potential of sensitive genome-wide detection of patterns of DNA imbalances or molecular portraits for class discovery and therapeutic stratification.

Highly efficient isothermal DNA amplification system using three elements of 5'-DNA-RNA-3' chimeric primers, RNaseH and strand-displacing DNA polymerase

We developed an efficient method of isothermally amplifying DNA termed ICAN, Isothermal and Chimeric primer-initiated Amplification of Nucleic acids. This method allows the amplification of target DNA under isothermal conditions at around 55 degrees C using only a pair of 5'-DNA-RNA-3' chimeric primers, a thermostable RNaseH and a DNA polymerase with strong strand-displacing activity. ICAN is capable of amplifying DNA at least several times greater than the amount produced with PCR by increasing primer concentration. This method would be applicable for on-site DNA detection including gene diagnosis, and would also be suitable for 'real time' detection when combined with a cycling probe.

A new enzymatic route for production of long 5'-phosphorylated oligonucleotides using suicide cassettes and rolling circle DNA synthesis

Background

The quality of chemically synthesized oligonucleotides falls with the length of the oligonucleotide, not least due to depurinations and premature termination during production. This limits the use of long oligonucleotides in assays where long high-quality oligonucleotides are needed (e.g. padlock probes). Another problem with chemically synthesized oligonucleotides is that secondary structures contained within an oligonucleotide reduce the efficiency of HPLC and/or PAGE purification. Additionally, ligation of chemically synthesized oligonucleotides is less efficient than the ligation of enzymatically produced DNA molecules.

Results

Chemically synthesized oligonucleotides with hairpin structures were acquired from our standard supplier. The stem of the hairpin contained recognition sequences for the Nt. Alw I nicking enzyme and the Mly I restriction enzyme. These double stranded regions were positioned in a way to allow self-templated circularization of the oligonucleotide. Following ligation, tandem repeats of the complementary sequence of the circular oligonucleotide could be produced through rolling circle DNA synthesis. By running successive rounds of ligation, rolling circle DNA synthesis, and nicking, the original oligonucleotide could be amplified as either the (+)-strand or the (-)-strand. Alternatively, the hairpin structure could be removed by cleavage with the Mly I restriction enzyme, thereby releasing the oligonucleotide sequence contained within the hairpin structure from the hairpin.

Conclusion

We present here a method for the enzymatic production through DNA amplification of oligonucleotides with freely designable 5'-ends and 3'-ends, using hairpin-containing self-templating oligonucleotides. The hairpin comprises recognition sequences for a nicking enzyme and a restriction enzyme. The oligonucleotides are amplified by successive rounds of ligation, rolling circle DNA synthesis and nicking. Furthermore, the hairpin can be removed by cleavage with the Mly I restriction enzyme. We have named such hairpin structures "suicide cassettes".

Ku suppresses formation of telomeric circles and alternative telomere lengthening in Arabidopsis

Telomeres in mammals and plants are protected by the terminal t loop structure, the formation of which parallels the first steps of intrachromatid homologous recombination (HR). Under some circumstances, cells can also utilize an HR-based mechanism (alternative lengthening of telomeres [ALT]) as a back-up pathway for telomere maintenance. We have found that the Ku70/80 heterodimer, a central nonhomologous end-joining DNA repair factor, inhibits engagement of ALT in Arabidopsis telomerase-negative cells. To further assess HR activities at telomeres, we have developed a sensitive assay for detecting extrachromosomal telomeric circles (t circles) that may arise from t loop resolution and aberrant HR. We show that Ku70/80 specifically inhibits circle formation at telomeres, but not at centromeric and rDNA repeats. Ku inactivation results in increased formation of t circles that represent approximately 4% of total telomeric DNA. However, telomeres in ku mutants are fully functional, indicating that telomerase efficiently heals ongoing terminal deletions arising from excision of the t circles.

Reversible photopadlocking on double-stranded DNA

We describe a highly efficient method for reversible photocircularization of oligonucleotide (ODN) on a double-stranded DNA template: 5-carboxyvinyl-2'-deoxyuridine-containing ODN was reversibly circularized around the target sequence of the double-stranded plasmid DNA resulting in formation of a catenated plasmid.

Technique for quantitative detection of specific DNA sequences using alternately binding quenching probe competitive assay combined with loop-mediated isothermal amplification

We describe a novel technique for a simple, rapid, and reliable quantitative detection of specific DNA sequences using an alternately binding quenching probe (AB-QProbe) that binds to either the gene of interest (target) or an internal standard (competitor) in combination with loop-mediated isothermal amplification (LAMP). The AB-QProbe is a singly labeled oligonucleotide bearing a fluorescent dye at the 5' end. The fluorescence intensity of the AB-QProbe reflects the ratio of the LAMP products from the target and competitor. We amplified the target and competitor by LAMP under isothermal conditions with high specificity, efficiency, and rapidity and calculated the starting quantity of the target from the fluorescence intensities at the beginning and end of LAMP. We call this technique alternately binding quenching probe competitive LAMP (ABC-LAMP). We quantified amoA, which encodes the ammonia-oxidizing enzyme in environmental bacteria, as a model target by ABC-LAMP, real-time PCR, and real-time turbidimetry of LAMP. By comparison, the accuracy of ABC-LAMP was found to be similar to that of real-time PCR. Moreover, ABC-LAMP enables the accurate quantification of DNA in the presence of DNA amplification inhibitors such as humic acid, urea, and Triton X-100 that compromise the values measured by real-time PCR and real-time turbidimetry of LAMP.

Evaluation of whole genome amplification methods using postmortem brain samples

The importance of examining genomic DNA derived from human brain has been highlighted by recent findings such as the possible link between DNA methylation and behavior or mental disorders, as well as the possible genomic differences between neurons from the same individual caused by transposons and aneuploidy. Consequently, obtaining a sufficient amount of genomic DNA derived from human brain is a critical issue for further research. Whole genome amplification (WGA) methods, by which genomic DNA is typically amplified on the order of 10(4)-10(6), will be a valuable tool for providing a sufficient amount of DNA for various molecular genetic studies. Here we evaluated three methods, including both PCR-based and non-PCR based WGA, as well as DNA extraction methods using frozen postmortem brain tissue. We found that WGA products from postmortem brains can be used in molecular genetic analysis, if a particular protocol for DNA extraction is used, and the most appropriate method for WGA depends on the state of the genomic DNA to be amplified.

Single molecule transcription profiling with AFM

Established techniques for global gene expression profiling, such as microarrays, face fundamental sensitivity constraints. Due to greatly increasing interest in examining minute samples from micro-dissected tissues, including single cells, unorthodox approaches, including molecular nanotechnologies, are being explored in this application. Here, we examine the use of single molecule, ordered restriction mapping, combined with AFM, to measure gene transcription levels from very low abundance samples. We frame the problem mathematically, using coding theory, and present an analysis of the critical error sources that may serve as a guide to designing future studies. We follow with experiments detailing the construction of high density, single molecule, ordered restriction maps from plasmids and from cDNA molecules, using two different enzymes, a result not previously reported. We discuss these results in the context of our calculations.

Fluorescence-based detection of short DNA sequences under non-denaturing conditions

The ability of peptide nucleic acid (PNA) to open up duplex DNA in a highly sequence-specific manner makes it possible to detect short DNA sequences on the background of or within genomic DNA under non-denaturing conditions. To do so, chosen marker sites in double-stranded DNA are locally opened by a pair of PNA openers, thus transforming one strand within the target region (20-30 bp) into the single-stranded form. Onto this accessible DNA sequence a circular oligonucleotide probe is assembled, which serves as a template for rolling circle amplification (RCA). Both homogeneous and heterogeneous assay formats are investigated, as are different formats for fluorescence-based amplicon detection. Our recent data with immobilized analytes suggest that marker sequences in plasmid and bacterial chromosomal DNA can be successfully detected.

Multiple displacement amplification as an aid in checkerboard DNA-DNA hybridization

OBJECTIVE

The study aimed to determine if multiple displacement amplification could be used to provide abundant target DNA and DNA probes for checkerboard DNA-DNA hybridization.

METHODS

Multiple displacement amplification was used to amplify 1 and 10 ng DNA from 16 individual bacterial species, DNA from single colonies, from a mixture of 20 bacterial species and oral biofilm samples, such as supragingival plaque, subgingival plaque, buccal swab and root canal samples. Samples in reaction buffer were heat-denatured at 95 degrees C for 3 min and cooled to 4 degrees C. Phi29 DNA polymerase was added and the mixture was incubated at 30 degrees C for 16-18 h. The quantity of the product was evaluated by the Picogreen assay. The amplified material was labeled with digoxigenin. The probes were compared with probes obtained from unamplified DNA using checkerboard DNA-DNA hybridization. Both amplified DNA and unamplified DNA were used as targets on the membrane. Amplified oral biofilm samples were compared to unamplified samples using checkerboard DNA-DNA hybridization.

RESULTS

The DNA yield ranged from 4 to 11 microg. DNA-DNA hybridization showed that the amplified genome of each species used either as target or as probe provided signals equivalent to controls and that amplification of a mixture of species provided signals comparable to those provided by the unamplified source mixture. Amplified oral biofilm samples exhibited comparable proportions of bacterial DNA when compared to the original unamplified samples.

CONCLUSIONS

The multiple displacement amplification technique is a simple and reliable method to uniformly amplify DNA for use in checkerboard DNA-DNA hybridization. It is also a useful tool in the amplification of clinical samples.

Mutation and haplotype analysis for Duchenne muscular dystrophy by single cell multiple displacement amplification

Duchenne muscular dystrophy (DMD) is an X-linked recessive genetic disorder with mutational heterogeneity. The scarcity of DNA from single cells in preimplantation genetic diagnosis (PGD) for DMD limits comprehensive genetic testing. Multiple displacement amplification (MDA) is reported to generate large amounts of template and give the most complete coverage and unbiased amplification to date. Here, we developed mutation and haplotype analysis in conjunction with gender determination on MDA products of single cells providing a generic approach that widens availability of PGD for female carriers with varied mutations. MDA amplified with 98.5% success for single lymphocytes and 94.2% success for single blastomeres, which was evaluated on 60 lymphocytes and 40 blastomeres. A total of six commonly mutant exons, eight short tandem repeat markers within dystrophin gene and amelogenin were incorporated into subsequent singleplex PCR assays. The mean allele dropout rate was 9.0% for single lymphocytes and 25.5% for single blastomeres. None of the blank controls gave a positive signal. Genotyping of each pedigree for three families provided 2-3 fully informative alleles per dystrophin haplotype besides specific mutant exons and amelogenin. We suggest that this approach is reliable to identify non-carrier female embryos other than unaffected male embryos and reduce the risk of misdiagnosis.

Mechanism of chimera formation during the Multiple Displacement Amplification reaction

Background

Multiple Displacement Amplification (MDA) is a method used for amplifying limiting DNA sources. The high molecular weight amplified DNA is ideal for DNA library construction. While this has enabled genomic sequencing from one or a few cells of unculturable microorganisms, the process is complicated by the tendency of MDA to generate chimeric DNA rearrangements in the amplified DNA. Determining the source of the DNA rearrangements would be an important step towards reducing or eliminating them.

Results

Here, we characterize the major types of chimeras formed by carrying out an MDA whole genome amplification from a single E. coli cell and sequencing by the 454 Life Sciences method. Analysis of 475 chimeras revealed the predominant reaction mechanisms that create the DNA rearrangements. The highly branched DNA synthesized in MDA can assume many alternative secondary structures. DNA strands extended on an initial template can be displaced becoming available to prime on a second template creating the chimeras. Evidence supports a model in which branch migration can displace 3'-ends freeing them to prime on the new templates. More than 85% of the resulting DNA rearrangements were inverted sequences with intervening deletions that the model predicts. Intramolecular rearrangements were favored, with displaced 3'-ends reannealing to single stranded 5'-strands contained within the same branched DNA molecule. In over 70% of the chimeric junctions, the 3' termini had initiated priming at complimentary sequences of 2–21 nucleotides (nts) in the new templates.

Conclusion

Formation of chimeras is an important limitation to the MDA method, particularly for whole genome sequencing. Identification of the mechanism for chimera formation provides new insight into the MDA reaction and suggests methods to reduce chimeras. The 454 sequencing approach used here will provide a rapid method to assess the utility of reaction modifications.

Real-time rolling circle amplification for protein detection

Real-time nucleic acid amplification methods can be extremely useful for the identification and quantitation of nucleic acid analytes, but are more difficult to adapt to protein or other analytes. To facilitate the development of real-time rolling circle amplification (RCA) for protein targets, we have developed a novel type of conformation-switching aptamer that can be circularized upon interaction with its protein target, the platelet-derived growth factor (PDGF). Using the structure-switching aptamer, real-time RCA can be used to specifically quantitate PDGF down to the low-nanomolar range (limit of detection, 0.4 nM), even against a background of cellular lysate. The aptamer can also be adapted to RCA on surfaces, although quantitation proved to be more difficult. One of the great advantages of the method described herein is that it can be immediately adapted to almost any aptamer and does not require two or more affinity reagents as do sandwich or proximity assays.

Parallel single nucleotide polymorphism genotyping by surface invasive cleavage with universal detection

Large-scale investigations of sequence variation within the human species will provide information about the basis of heritable variation in disease susceptibility and human migration. The surface invader assay (an adaptation of the invasive cleavage reaction to an array format) is capable of exquisitely sensitive and specific detection of genetic variation. It is shown here that this genotyping technology can be multiplexed in a DNA array format, permitting the parallel analysis of a panel of single nucleotide polymorphisms (SNPs) directly from an unamplified genomic DNA target. In addition, a "universal" mode of detection was developed that makes use of a mixture of degenerate templates for DNA ligation to the surface-bound cleaved oligonucleotides and thereby makes this strategy amenable to any desired SNP site or combination of SNP sites, without regard to their particular DNA sequences. This approach was demonstrated on a proof-of-principle scale using small DNA arrays to genotype 6 SNP markers in the PTPN1 gene and 10 mutations in the cystic fibrosis transmembrane conductance regulator gene. This ability to analyze many different genetic variations in parallel, directly from unamplified human genomic DNA samples, lays the groundwork for the development of high-density arrays able to analyze hundreds of thousands or even millions of SNPs.

Determination of the ex vivo rates of human immunodeficiency virus type 1 reverse transcription by using novel strand-specific amplification analysis

Replication of human immunodeficiency virus type 1 (HIV-1), like all organisms, involves synthesis of a minus-strand and a plus-strand of nucleic acid. Currently available PCR methods cannot distinguish between the two strands of nucleic acids. To carry out detailed analysis of HIV-1 reverse transcription from infected cells, we have developed a novel strand-specific amplification (SSA) assay using single-stranded padlock probes that are specifically hybridized to a target strand, ligated, and quantified for sensitive analysis of the kinetics of HIV-1 reverse transcription in cells. Using SSA, we have determined for the first time the ex vivo rates of HIV-1 minus-strand DNA synthesis in 293T and human primary CD4(+) T cells ( approximately 68 to 70 nucleotides/min). We also determined the rates of minus-strand DNA transfer ( approximately 4 min), plus-strand DNA transfer ( approximately 26 min), and initiation of plus-strand DNA synthesis ( approximately 9 min) in 293T cells. Additionally, our results indicate that plus-strand DNA synthesis is initiated at multiple sites and that several reverse transcriptase inhibitors influence the kinetics of minus-strand DNA synthesis differently, providing insights into their mechanism of inhibition. The SSA technology provides a novel approach to analyzing DNA replication processes and should facilitate the development of new antiretroviral drugs that target specific steps in HIV-1 reverse transcription.

Digital quantification of mutant DNA in cancer patients

PURPOSE OF REVIEW

The accumulation of somatic mutations is the major driving force for tumorigenesis. These mutations uniquely differentiate tumor cells from their normal counterparts. Mutations within tumor cells and mutant DNA released by tumor cells into blood, lymph, stool, tissues and other bodily compartments can thereby be used for cancer detection. Here we discuss technologies available for the detection and quantification of mutant DNA in clinical samples and the value of such measurements for patient management.

RECENT FINDINGS

Conventional mutation detection technologies are either qualitative or only roughly estimate the abundance of mutant DNA molecules. Recently-developed approaches, however, use single molecule counting to determine the genotype of each individual member of a DNA population, providing a more accurate and precise digital output.

SUMMARY

In this review, we discuss the clinical utility of mutant DNA quantification in cancer patients in the context of recent technical advances made in digital mutation detection.

Diagnosing viruses by the rolling circle amplified synthesis of DNAzymes

Circular DNA is used as a template for the amplified detection of M13 phage ssDNA by a rolling circle amplification (RCA) process that synthesizes DNAzyme chains, thus enabling the colorimetric or chemiluminescent detection of the analyte.

A protein detection technique by using surface plasmon resonance (SPR) with rolling circle amplification (RCA) and nanogold-modified tags

Surface plasmon resonance (SPR) can detect molecules bound to a surface by subtle changes in the SPR angle. By immobilizing probes onto the surface and passing analyte solution through the surface, changes in SPR angle indicate the binding between analyte and probes. Detection of analyte from solution can be achieved easily. By using rolling circle amplification (RCA) and nanogold-modified tags, the signals of analyte binding are greatly amplified, and the sensitivity of this technique is significantly improved. Furthermore, this technique has potentials for ultra-sensitive detection and microarray analysis. In this paper, this detection technique is introduced and shown to have great amplification capability. Using 5 nm nanogold with 30 min of RCA development time, this proposed protein detection technique shows over 60 times amplification of the original signal.

Detection of proteins based on amino acid sequences by multiple aptamers against tripeptides

A number of different ligands have been tested in the course of the development of protein array technology. The most extensively studied example of protein ligands has been based on antibody-antigen interaction. Other examples include protein-protein, protein-nucleic acid, and protein-small molecule interactions. All these ligands can recognize and specifically bind to protein epitopes. In this study, we have developed a novel technology using DNA-based aptamers to detect proteins based on their amino acid sequences. Mouse cathepsin D was used for the proof of principle experiment. Four tripeptides, Leu-Ala-Ser, Asp-Gly-Ile, Gly-Glu-Leu, and Lys-Ala-Ile, were selected based on the published amino acid sequence of mouse cathepsin D. DNA aptamers against the tripeptides were isolated using the systematic evolution of ligands of exponential enrichment method. We have demonstrated that the aptamers specifically interacted with mouse cathepsin D using the structure-switch method. We further performed a proximity-dependent ligation assay to demonstrate that multiple aptamers could specifically detect the protein from cell extracts. In principle, one library containing 8000 aptamers should be enough to detect almost all proteins in the whole proteome in all organisms. This technology could be applied to generate a new generation of protein arrays.

Large fragment Bst DNA polymerase for whole genome amplification of DNA from formalin-fixed paraffin-embedded tissues

BACKGROUND

Formalin-fixed paraffin-embedded (FFPE) tissues represent the largest source of archival biological material available for genomic studies of human cancer. Therefore, it is desirable to develop methods that enable whole genome amplification (WGA) using DNA extracted from FFPE tissues. Multiple-strand Displacement Amplification (MDA) is an isothermal method for WGA that uses the large fragment of Bst DNA polymerase. To date, MDA has been feasible only for genomic DNA isolated from fresh or snap-frozen tissue, and yields a representational distortion of less than threefold.

RESULTS

We amplified genomic DNA of five FFPE samples of normal human lung tissue with the large fragment of Bst DNA polymerase. Using quantitative PCR, the copy number of 7 genes was evaluated in both amplified and original DNA samples. Four neuroblastoma xenograft samples derived from cell lines with known N-myc gene copy number were also evaluated, as were 7 samples of non-small cell lung cancer (NSCLC) tumors with known Skp2 gene amplification. In addition, we compared the array comparative genomic hybridization (CGH)-based genome profiles of two NSCLC samples before and after Bst MDA. A median 990-fold amplification of DNA was achieved. The DNA amplification products had a very high molecular weight (> 23 Kb). When the gene content of the amplified samples was compared to that of the original samples, the representational distortion was limited to threefold. Array CGH genome profiles of amplified and non-amplified FFPE DNA were similar.

CONCLUSION

Large fragment Bst DNA polymerase is suitable for WGA of DNA extracted from FFPE tissues, with an expected maximal representational distortion of threefold. Amplified DNA may be used for the detection of gene copy number changes by quantitative realtime PCR and genome profiling by array CGH.

Whole-genome multiple displacement amplification from single cells

Multiple displacement amplification (MDA) is a recently described method of whole-genome amplification (WGA) that has proven efficient in the amplification of small amounts of DNA, including DNA from single cells. Compared with PCR-based WGA methods, MDA generates DNA with a higher molecular weight and shows better genome coverage. This protocol was developed for preimplantation genetic diagnosis, and details a method for performing single-cell MDA using the phi29 DNA polymerase. It can also be useful for the amplification of other minute quantities of DNA, such as from forensic material or microdissected tissue. The protocol includes the collection and lysis of single cells, and all materials and steps involved in the MDA reaction. The whole procedure takes 3 h and generates 1-2 microg of DNA from a single cell, which is suitable for multiple downstream applications, such as sequencing, short tandem repeat analysis or array comparative genomic hybridization.

Detection and identification of IHN and ISA viruses by isothermal DNA amplification in microcapillary tubes

Unique base sequences derived from RNA of both infectious hematopoietic necrosis virus (IHNV) and infectious salmon anemia virus (ISAV) were detected and identified using a combination of surface-associated molecular padlock DNA probes (MPPs) and rolling circle amplification (RCA) in microcapillary tubes. DNA oligonucleotides with base sequences identical to RNA obtained from IHNV or ISAV were recognized by MPPs. Circularized MPPs were then captured on the inner surfaces of glass microcapillary tubes by immobilized DNA oligonucleotide primers. Extension of the immobilized primers by isothermal RCA produced DNA concatamers, which were labeled with fluorescent SYBR Green II nucleic acid stain, and measured by microfluorimetry. Molecular padlock probes, combined with this method of surface-associated isothermal RCA, exhibited high selectivity without the need for thermal cycling. This method is applicable to the design of low-power field sensors capable of multiplex detection of viral, bacterial, and protozoan pathogens within localized regions of microcapillary tubes.

Digital quantification using amplified single-molecule detection

We describe a scheme for biomolecule enumeration by converting nanometer-scale specific molecular recognition events mediated by rolling-circle amplification to fluorescent micrometer-sized DNA molecules amenable to discrete optical detection. Our amplified single-molecule detection (SMD) approach preserves the discrete nature of the molecular population, allowing multiplex detection and highly precise quantification of molecules over a dynamic range of seven orders of magnitude. We apply the method for sensitive detection and quantification of the bacterial pathogen Vibrio cholerae.

Highly parallel genomic assays

Recent developments in highly parallel genome-wide assays are transforming the study of human health and disease. High-resolution whole-genome association studies of complex diseases are finally being undertaken after much hypothesizing about their merit for finding disease loci. The availability of inexpensive high-density SNP-genotyping arrays has made this feasible. Cancer biology will also be transformed by high-resolution genomic and epigenomic analysis. In the future, most cancers might be staged by high-resolution molecular profiling rather than by gross cytological analysis. Here, we describe the key developments that enable highly parallel genomic assays.

A microRNA detection system based on padlock probes and rolling circle amplification

The differential expression and the regulatory roles of microRNAs (miRNAs) are being studied intensively these years. Their minute size of only 19-24 nucleotides and strong sequence similarity among related species call for enhanced methods for reliable detection and quantification. Moreover, miRNA expression is generally restricted to a limited number of specific cells within an organism and therefore requires highly sensitive detection methods. Here we present a simple and reliable miRNA detection protocol based on padlock probes and rolling circle amplification. It can be performed without specialized equipment and is capable of measuring the content of specific miRNAs in a few nanograms of total RNA.

Tapping diversity lost in transformations--in vitro amplification of ligation reactions

Molecular evolution is a powerful means of engineering proteins. It usually requires the generation of a large recombinant DNA library of variants for cloning into a phage or plasmid vector, and the transformation of a host organism for expression and screening of the variant proteins. However, library size is often limited by the low yields of circular DNA and the poor transformation efficiencies of linear DNA. Here we have overcome this limitation by amplification of recombinant circular DNA molecules directly from ligation reactions. The amplification by bacteriophage Phi29 polymerase increased the number of transformants; thus from a nanogram-scale ligation of DNA fragments comprising two sub-libraries of variant antibody domains, we succeeded in amplifying a highly diverse and large combinatorial phage antibody library (>10(9) transformants in Escherichia coli and 10(5)-fold more transformants than without amplification). From the amplified library, but not from the smaller un-amplified library, we could isolate several antibody fragments against a target antigen. It appears that amplification of ligations with Phi29 polymerase can help recover clones and molecular diversity otherwise lost in the transformation step. A further feature of the method is the option of using PCR-amplified vectors for ligations.

Harnessing asymmetrical substrate recognition by thermostable EndoV to achieve balanced linear amplification in multiplexed SNP typing

Multiplexed amplification of specific DNA sequences, by PCR or by strand-displacement amplification, is an intrinsically biased process. The relative abundance of amplified DNA can be altered significantly from the original representation and, in extreme cases, allele dropout can occur. In this paper, we present a method of linear amplification of DNA that relies on the cooperative, sequence-dependent functioning of the DNA mismatch-repair enzyme endonuclease V (EndoV) from Thermotoga maritima (Tma) and Bacillus stearothermophilus (Bst) DNA polymerase. Tma EndoV can nick one strand of unmodified duplex DNA, allowing extension by Bst polymerase. By controlling the bases surrounding a mismatch and the mismatch itself, the efficiency of nicking by EndoV and extension by Bst polymerase can be controlled. The method currently allows 100-fold multiplexed amplification of target molecules to be performed isothermally, with an average change of <1.3-fold in their original representation. Because only a single primer is necessary, primer artefacts and nonspecific amplification products are minimized.

Assessment of whole genome amplification-induced bias through high-throughput, massively parallel whole genome sequencing

BACKGROUND

Whole genome amplification is an increasingly common technique through which minute amounts of DNA can be multiplied to generate quantities suitable for genetic testing and analysis. Questions of amplification-induced error and template bias generated by these methods have previously been addressed through either small scale (SNPs) or large scale (CGH array, FISH) methodologies. Here we utilized whole genome sequencing to assess amplification-induced bias in both coding and non-coding regions of two bacterial genomes. Halobacterium species NRC-1 DNA and Campylobacter jejuni were amplified by several common, commercially available protocols: multiple displacement amplification, primer extension pre-amplification and degenerate oligonucleotide primed PCR. The amplification-induced bias of each method was assessed by sequencing both genomes in their entirety using the 454 Sequencing System technology and comparing the results with those obtained from unamplified controls.

RESULTS

All amplification methodologies induced statistically significant bias relative to the unamplified control. For the Halobacterium species NRC-1 genome, assessed at 100 base resolution, the D-statistics from GenomiPhi-amplified material were 119 times greater than those from unamplified material, 164.0 times greater for Repli-G, 165.0 times greater for PEP-PCR and 252.0 times greater than the unamplified controls for DOP-PCR. For Campylobacter jejuni, also analyzed at 100 base resolution, the D-statistics from GenomiPhi-amplified material were 15 times greater than those from unamplified material, 19.8 times greater for Repli-G, 61.8 times greater for PEP-PCR and 220.5 times greater than the unamplified controls for DOP-PCR.

CONCLUSION

Of the amplification methodologies examined in this paper, the multiple displacement amplification products generated the least bias, and produced significantly higher yields of amplified DNA.

Mass Spectrometry-Based Study of the Plasma Proteome in a Mouse Intestinal Tumor Model

Early detection of cancer can greatly improve prognosis. Identification of proteins or peptides in the circulation, at different stages of cancer, would greatly enhance treatment decisions. Mass spectrometry (MS) is emerging as a powerful tool to identify proteins from complex mixtures such as plasma that may help identify novel sets of markers that may be associated with the presence of tumors. To examine this feature we have used a genetically modified mouse model, Apc(Min), which develops intestinal tumors with 100% penetrance. Utilizing liquid chromatography-tandem mass spectrometry (LC-MS/MS), we identified total plasma proteome (TPP) and plasma glycoproteome (PGP) profiles in tumor-bearing mice. Principal component analysis (PCA) and agglomerative hierarchial clustering analysis revealed that these protein profiles can be used to distinguish between tumor-bearing Apc(Min) and wild-type control mice. Leave-one-out cross-validation analysis established that global TPP and global PGP profiles can be used to correctly predict tumor-bearing animals in 17/19 (89%) and 19/19 (100%) of cases, respectively. Furthermore, leave-one-out cross-validation analysis confirmed that the significant differentially expressed proteins from both the TPP and the PGP were able to correctly predict tumor-bearing animals in 19/19 (100%) of cases. A subset of these proteins was independently validated by antibody microarrays using detection by two color rolling circle amplification (TC-RCA). Analysis of the significant differentially expressed proteins indicated that some might derive from the stroma or the host response. These studies suggest that mass spectrometry-based approaches to examine the plasma proteome may prove to be a valuable method for determining the presence of intestinal tumors.

High-throughput transposon mutagenesis of Corynebacterium glutamicum and construction of a single-gene disruptant mutant library

A simple and high-throughput transposon-mediated mutagenesis system employing two different types of transposons in combination with direct genomic DNA amplification and thermal asymmetric interlaced PCR (TAIL-PCR) was developed. Each of the two minitransposons based on IS31831 (ISL3 family) and Tn5 (IS4 family) was integrated into the Corynebacterium glutamicum R genome. By using BLAST and Perl, transposon insertion locations were automatically identified based on the sequences of TAIL-PCR products of mutant cells. Insertion locations of 18,000 mutants were analyzed, and a comprehensive insertion library covering nearly 80% of the 2,990 open reading frames of C. glutamicum R was generated. Eight thousand of the mutants, exhibiting disruption in 2,330 genes, survived on complex medium under normal laboratory conditions, indicating that the genes were not essential for cell survival. Of the 2,330 genes, 30 exhibited high similarity to essential genes of Escherichia coli or Bacillus subtilis. This approach could be useful in furthering genetic understanding of cellular life and facilitating the functional analysis of microorganisms.

Molecular Zipper: a fluorescent probe for real-time isothermal DNA amplification

Rolling-circle amplification (RCA) and ramification amplification (RAM, also known as hyperbranched RCA) are isothermal nucleic acid amplification technologies that have gained a great application in in situ signal amplification, DNA and protein microarray assays, single nucleotide polymorphism detection, as well as clinical diagnosis. Real-time detection of RCA or RAM products has been a challenge because of most real-time detection systems, including Taqman and Molecular Beacon, are designed for thermal cycling-based DNA amplification technology. In the present study, we describe a novel fluorescent probe construct, termed molecular zipper, which is specially designed for quantifying target DNA by real-time monitoring RAM reactions. Our results showed that the molecular zipper has very low background fluorescence due to the strong interaction between two strands. Once it is incorporated into the RAM products its double strand region is opened by displacement, therefore, its fluorophore releases a fluorescent signal. Applying the molecular zipper in RAM assay, we were able to detect as few as 10 molecules within 90 min reaction. A linear relationship was observed between initial input of targets and threshold time (R² = 0.985). These results indicate that molecular zipper can be applied to real-time monitoring and qualification of RAM reaction, implying an amenable method for automatic RAM-based diagnostic assays.

Multiple displacement amplification to create a long-lasting source of DNA for genetic studies

In many situations there may not be sufficient DNA collected from patient or population cohorts to meet the requirements of genome-wide analysis of SNPs, genomic copy number polymorphisms, or acquired copy number alternations. When the amount of available DNA for genotype analysis is limited, high performance whole-genome amplification (WGA) represents a new development in genetic analysis. It is especially useful for analysis of DNA extracted from stored histology slides, tissue samples, buccal swabs, or blood stains collected on filter paper. The multiple displacement amplification (MDA) method, which relies on isothermal amplification using the DNA polymerase of the bacteriophage phi29, is a recently developed technique for high performance WGA. This review addresses new trends in the technical performance of MDA and its applications to genetic analyses. The main challenge of WGA methods is to obtain balanced and faithful replication of all chromosomal regions without the loss of or preferential amplification of any genomic loci or allele. In multiple comparisons to other WGA methods, MDA appears to be most reliable for genotyping, with the most favorable call rates, best genomic coverage, and lowest amplification bias.

Lock and roll: single-molecule genotyping in situ using padlock probes and rolling-circle amplification

In this review I will describe the development of a technique that enables genotyping of individual DNA molecules in the context of morphologically preserved fixed cells, from the fundamental concept published in 1994 to the present status. The review describes enzyme-assisted histochemistry approaches to achieve highly specific molecular identification reactions coupled to efficient signal amplification. The primary molecular identification is accomplished through circularization of oligonucleotide probes, called padlock probes. The circularization reaction is catalyzed by a DNA ligase, which provides robust distinction between single-nucleotide variants under standard reaction conditions. To generate a detectable signal from individual circularized probe molecules, a DNA polymerase is added that replicates probe circles, generating a long tandem-repeated DNA product, easily visualized using a standard epi-fluorescence microscope. Individual signals are recorded as bright dots, providing digital information about the abundance of specific sequences and opportunities for simultaneous detection of several targets using spectral multiplexing. The importance of strictly target-dependent signal amplification will be discussed.

Optimization and evaluation of single-cell whole-genome multiple displacement amplification

The scarcity of genomic DNA can be a limiting factor in some fields of genetic research. One of the methods developed to overcome this difficulty is whole genome amplification (WGA). Recently, multiple displacement amplification (MDA) has proved very efficient in the WGA of small DNA samples and pools of cells, the reaction being catalyzed by the phi29 or the Bst DNA polymerases. The aim of the present study was to develop a reliable, efficient, and fast protocol for MDA at the single-cell level. We first compared the efficiency of phi29 and Bst polymerases on DNA samples and single cells. The phi29 polymerase generated accurately, in a short time and from a single cell, sufficient DNA for a large set of tests, whereas the Bst enzyme showed a low efficiency and a high error rate. A single-cell protocol was optimized using the phi29 polymerase and was evaluated on 60 single cells; the DNA obtained DNA was assessed by 22 locus-specific PCRs. This new protocol can be useful for many applications involving minute quantities of starting material, such as forensic DNA analysis, prenatal and preimplantation genetic diagnosis, or cancer research.

Improvements of rolling circle amplification (RCA) efficiency and accuracy using Thermus thermophilus SSB mutant protein

Rolling circle amplification (RCA) of plasmid or genomic DNA using random hexamers and bacteriophage phi29 DNA polymerase has become increasingly popular in the amplification of template DNA in DNA sequencing. We have found that the mutant protein of single-stranded DNA binding protein (SSB) from Thermus thermophilus (Tth) HB8 enhances the efficiency of amplification of DNA templates. In addition, the TthSSB mutant protein increased the specificity of phi29 DNA polymerase. We have overexpressed the native and mutant forms of TthSSB protein in Escherichia coli and purified them to homogeneity. In vitro, these proteins were found to bind specifically to single-stranded DNA. Addition of TthSSB mutant protein to RCA halved the elongation time required for phi29 DNA polymerase to synthesize DNA fragments in RCA. Furthermore, the presence of the TthSSB mutant protein essentially eliminates nonspecific DNA products in RCA reactions.

Single-cell chromosomal imbalances detection by array CGH

Genomic imbalances are a major cause of constitutional and acquired disorders. Therefore, aneuploidy screening has become the cornerstone of preimplantation, prenatal and postnatal genetic diagnosis, as well as a routine aspect of the diagnostic workup of many acquired disorders. Recently, array comparative genomic hybridization (array CGH) has been introduced as a rapid and high-resolution method for the detection of both benign and disease-causing genomic copy-number variations. Until now, array CGH has been performed using a significant quantity of DNA derived from a pool of cells. Here, we present an array CGH method that accurately detects chromosomal imbalances from a single lymphoblast, fibroblast and blastomere within a single day. Trisomy 13, 18, 21 and monosomy X, as well as normal ploidy levels of all other chromosomes, were accurately determined from single fibroblasts. Moreover, we showed that a segmental deletion as small as 34 Mb could be detected. Finally, we demonstrated the possibility to detect aneuploidies in single blastomeres derived from preimplantation embryos. This technique offers new possibilities for genetic analysis of single cells in general and opens the route towards aneuploidy screening and detection of unbalanced translocations in preimplantation embryos in particular.

Scoring single-nucleotide polymorphisms at the single-molecule level by counting individual DNA cleavage events on surfaces

Single-nucleotide polymorphisms (SNPs) are the most frequent type of human genetic variation. Recent work has shown that it is possible to directly analyze SNPs in unamplified human genomic DNA samples using the surface-invasive cleavage reaction followed by rolling circle amplification (RCA) of the cleavage products. The ability of RCA to produce single-stranded DNA tens of thousands of nucleotides in length from a single cleaved DNA molecule on the surface suggested the possibility of detecting individual cleavage events on the surface. The feasibility of this approach to SNP scoring is shown here. Individual cleavage events on the surface are detected using fluorescence microscopy to visualize the single-stranded DNA product of the RCA reaction labeled with the fluorescent dye SYBR Green I. The surface density of fluorescent features observed is dependent upon the concentration of target DNA. Future reductions of the sample volume and optimization of the reaction conditions offer the potential of being able to perform such analyses on as little as a single copy of genomic DNA target.