Reduction of charge and discharge polarization by cobalt nanoparticles-embedded carbon nanofibers for Li-O2 batteries

The problem of high charge polarization is one of the most significant challenges in current nonaqueous Li-O2 batteries. The development of an electrode for the oxygen evolution reaction (OER) at reduced overpotential is thus essential. Here, we suggest a binder-free electrode based on Co nanoparticles embedded in carbon nanofibers (Co-CNFs), which simultaneously reduces the charge and discharge polarization and extends cycling stability. Co-CNF gives rise to a lower discharge polarization because of an enhanced oxygen reduction reaction activity compared to Co-free CNF. Although the embedment of Co does not enhance the OER activity, it significantly reduces charge overvoltage by forming easily decomposable amorphous Li2 O2 . A mechanism for the formation of amorphous Li2 O2 is suggested in terms of charge localization induced by the Co NPs. The findings suggest a new electrode design strategy of combining inexpensive metals and carbon materials for modulating the phase of the discharge product.

A Carbon- and Binder-Free Nanostructured Cathode for High-Performance Nonaqueous Li-O2 Battery

Operation of the nonaqueous Li-O2 battery critically relies on the reversible oxygen reduction/evolution reactions in the porous cathode. Carbon and polymeric binder, widely used for the construction of Li-O2 cathode, have recently been shown to decompose in the O2 environment and thus cannot sustain the desired battery reactions. Identifying stable cathode materials is thus a major current challenge that has motivated extensive search for noncarbonaceous alternatives. Here, RuO x /titanium nitride nanotube arrays (RuO x /TiN NTA) containing neither carbon nor binder are used as the cathode for nonaqueous Li-O2 batteries. The free standing TiN NTA electrode is more stable than carbon electrode, and possesses enhanced electronic conductivity compared to TiN nanoparticle bound with polytetrafluoroethylene due to a direct contact between TiN and Ti mesh substrate. RuO x is electrodeposited into TiN NTA to form a coaxial nanostructure, which can further promote the oxygen evolution reaction. This optimized monolithic electrode can avoid the side reaction arising from carbon material, which exhibits low overpotential and excellent cycle stability over 300 cycles. These results presented here demonstrate a highly effective carbon-free cathode and further imply that the structure designing of cathode plays a critical role for improving the electrochemical performance of nonaqueous Li-O2 batteries.

Converting biowaste corncob residue into high value added porous carbon for supercapacitor electrodes

In this report, corncob residue, the main by-product in the furfural industry, is used as a precursor to prepare porous carbon by a simple and direct thermal treatment: one-step activation without pre-carbonization. As a consequence, the corncob residue derived porous carbon achieves a high surface area of 1210 m(2) g(-1) after ash-removal. The carbon material has the advantages of low cost and low environmental impact, with a superior electrochemical performance compared to those polymer-based synthetic carbons as electrode material for a supercapacitor. The carbon electrode exhibits a high capacitance of 314 F g(-1) in 6M KOH electrolyte. The corresponding sample also shows a superb cycling stability. Almost no capacitance decay was observed after 100,000 cycles. The excellent electrochemical performance is due to the combination of a high specific surface area with a fraction of mesopores and highly stable structure.

Carbon-based electrocatalysts for advanced energy conversion and storage

Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) play curial roles in electrochemical energy conversion and storage, including fuel cells and metal-air batteries. Having rich multidimensional nanoarchitectures [for example, zero-dimensional (0D) fullerenes, 1D carbon nanotubes, 2D graphene, and 3D graphite] with tunable electronic and surface characteristics, various carbon nanomaterials have been demonstrated to act as efficient metal-free electrocatalysts for ORR and OER in fuel cells and batteries. We present a critical review on the recent advances in carbon-based metal-free catalysts for fuel cells and metal-air batteries, and discuss the perspectives and challenges in this rapidly developing field of practical significance.

Transient Rechargeable Batteries Triggered by Cascade Reactions

Transient battery is a new type of technology that allows the battery to disappear by an external trigger at any time. In this work, we successfully demonstrated the first transient rechargeable batteries based on dissoluble electrodes including V2O5 as the cathode and lithium metal as the anode as well as a biodegradable separator and battery encasement (PVP and sodium alginate, respectively). All the components are robust in a traditional lithium-ion battery (LIB) organic electrolyte and disappear in water completely within minutes due to triggered cascade reactions. With a simple cut-and-stack method, we designed a fully transient device with an area of 0.5 cm by 1 cm and total energy of 0.1 J. A shadow-mask technique was used to demonstrate the miniature device, which is compatible with transient electronics manufacturing. The materials, fabrication methods, and integration strategy discussed will be of interest for future developments in transient, self-powered electronics. The demonstration of a miniature Li battery shows the feasibility toward system integration for all transient electronics.

Amorphous GeOx-Coated Reduced Graphene Oxide Balls with Sandwich Structure for Long-Life Lithium-Ion Batteries

Amorphous GeOx-coated reduced graphene oxide (rGO) balls with sandwich structure are prepared via a spray-pyrolysis process using polystyrene (PS) nanobeads as sacrificial templates. This sandwich structure is formed by uniformly coating the exterior and interior of few-layer rGO with amorphous GeOx layers. X-ray photoelectron spectroscopy analysis reveals a Ge:O stoichiometry ratio of 1:1.7. The amorphous GeOx-coated rGO balls with sandwich structure have low charge-transfer resistance and fast Li(+)-ion diffusion rate. For example, at a current density of 2 A g(-1), the GeOx-coated rGO balls with sandwich and filled structures and the commercial GeO2 powders exhibit initial charge capacities of 795, 651, and 634 mA h g(-1), respectively; the corresponding 700th-cycle charge capacities are 758, 579, and 361 mA h g(-1). In addition, at a current density of 5 A g(-1), the rGO balls with sandwich structure have a 1600th-cycle reversible charge capacity of 629 mA h g(-1) and a corresponding capacity retention of 90.7%, as measured from the maximum reversible capacity at the 100th cycle.

Systematic interpretation of differential capacitance data

Differential capacitance (DC) data have been widely used to characterize the structure of electrolyte solutions near charged interfaces and as experimental validation of models for electrolyte structure. Fixing a large class of models of electrolyte free energy that incorporate finite-volume effects, a reduction is identified which permits the identification of all free energies within that class that return identical DC data. The result is an interpretation of DC data through the equivalence classes of nonideality terms, and associated boundary layer structures, that cannot be differentiated by DC data. Specifically, for binary salts, DC data, even if measured over a range of ionic concentrations, are unable to distinguish among models which exhibit charge asymmetry, charge reversal, and even ion crowding. The reduction applies to capacitors which are much wider than the associated Debye length and to finite-volume terms that are algebraic in charge density. However, within these restrictions the free energy is shown to be uniquely identified if the DC data are supplemented with measurements of the excess chemical potential of the system in the bulk state.

Silicon carbide-free graphene growth on silicon for lithium-ion battery with high volumetric energy density

Silicon is receiving discernable attention as an active material for next generation lithium-ion battery anodes because of its unparalleled gravimetric capacity. However, the large volume change of silicon over charge–discharge cycles weakens its competitiveness in the volumetric energy density and cycle life. Here we report direct graphene growth over silicon nanoparticles without silicon carbide formation. The graphene layers anchored onto the silicon surface accommodate the volume expansion of silicon via a sliding process between adjacent graphene layers. When paired with a commercial lithium cobalt oxide cathode, the silicon carbide-free graphene coating allows the full cell to reach volumetric energy densities of 972 and 700 Wh l⁻¹ at first and 200th cycle, respectively, 1.8 and 1.5 times higher than those of current commercial lithium-ion batteries. This observation suggests that two-dimensional layered structure of graphene and its silicon carbide-free integration with silicon can serve as a prototype in advancing silicon anodes to commercially viable technology.

The volume expansion of silicon is a big problem in lithium-ion batteries with silicon anodes. Here, the authors report direct graphene growth on silicon nanoparticles, which effectively mitigates the problem, leading to excellent electrochemical performance.

Yolk-shell Fe2O3 ⊙ C composites anchored on MWNTs with enhanced lithium and sodium storage

A unique architecture with yolk-shell Fe2O3 ⊙ C composites attached to the surface of MWNTs is designed. Benefiting from the good electrical conductivity of MWNTs and carbon layers, as well as the large void space to accommodate the volume expansion/extraction of Fe2O3 during battery cycling, the obtained MWNT@Fe2O3 ⊙ C exhibited outstanding lithium and sodium storage performance.

Degradation of Li/S Battery Electrodes On 3D Current Collectors Studied Using X-ray Phase Contrast Tomography

Lithium/sulphur batteries are promising candidates for future energy storage systems, mainly due to their high potential capacity. However low sulphur utilization and capacity fading hinder practical realizations. In order to improve understanding of the system, we investigate Li/S electrode morphology changes for different ageing steps, using X-ray phase contrast tomography. Thereby we find a strong decrease of sulphur loading after the first cycle, and a constant loading of about 15% of the initial loading afterwards. While cycling, the mean sulphur particle diameters decrease in a qualitatively similar fashion as the discharge capacity fades. The particles spread, migrate into the current collector and accumulate in the upper part again. Simultaneously sulphur particles lose contact area with the conducting network but regain it after ten cycles because their decreasing size results in higher surface areas. Since the capacity still decreases, this regain could be associated with effects such as surface area passivation and increasing charge transfer resistance.

Ultrahigh Surface Area Three-Dimensional Porous Graphitic Carbon from Conjugated Polymeric Molecular Framework

Porous graphitic carbon is essential for many applications such as energy storage devices, catalysts, and sorbents. However, current graphitic carbons are limited by low conductivity, low surface area, and ineffective pore structure. Here we report a scalable synthesis of porous graphitic carbons using a conjugated polymeric molecular framework as precursor. The multivalent cross-linker and rigid conjugated framework help to maintain micro- and mesoporous structures, while promoting graphitization during carbonization and chemical activation. The above unique design results in a class of highly graphitic carbons at temperature as low as 800 °C with record-high surface area (4073 m(2) g(-1)), large pore volume (2.26 cm(-3)), and hierarchical pore architecture. Such carbons simultaneously exhibit electrical conductivity >3 times more than activated carbons, very high electrochemical activity at high mass loading, and high stability, as demonstrated by supercapacitors and lithium-sulfur batteries with excellent performance. Moreover, the synthesis can be readily tuned to make a broad range of graphitic carbons with desired structures and compositions for many applications.

Starfish-shaped Co3O4/ZnFe2O4 Hollow Nanocomposite: Synthesis, Supercapacity, and Magnetic Properties

A novel starfish-shaped porous Co3O4/ZnFe2O4 hollow nanocomposite was fabricated for the first time by a facile and stepwise hydrothermal approach, utilizing metal-organic frameworks as precursors and sacrificial templates. The morphology evolution in the synthetic process upon reaction time and amount of raw materials were investigated in detail. The as-synthesized starfish-shaped porous Co3O4/ZnFe2O4 composites were studied as an electrode material for supercapacitors showing good capacitive performances. Their specific capacitance can reach as high as 326 F g(-1) at 1 A g(-1). The rational combination of components with different potential windows in a composite material enables a wide overall potential range resulting in the highest energy density of 82.5 Wh kg(-1), significantly larger than that of the single components. Magnetic measurements show that the system presents a large coercivity and high squareness (at 1.8 K, Hc = 884 Oe and Mr/Ms = 0.52) with respect to the individual components, which may be attributed to the unique morphology of Co3O4/ZnFe2O4, as well as surface and interface exchange coupling effects. Materials with this novel design and fabrication may show promise for potential applications in electrochemical energy storage and magnetic devices.

Ultralong Durability of Porous α-Fe2O3 Nanofibers in Practical Li-Ion Configuration with LiMn2O4 Cathode

Prelithiated, electrospun α-Fe2O3 nanofibers display an exceptional cycleability when it is paired with commercial LiMn2O4 cathode in full-cell assembly. The performance of such α-Fe2O3 nanofibers is mainly due to the presence of unique morphology with porous structure, appropriate mass balance, and working potential. Also, synthesis technique cannot be ruled out for the performance.

Effect of Ni(2+) content on lithium/nickel disorder for Ni-rich cathode materials

Li excess LiNi0.8Co0.1Mn0.1O2 was produced by sintering the Ni0.8Co0.1Mn0.1(OH)2 precursor with different amounts of a lithium source. X-ray photoelectron spectroscopy confirmed that a greater excess of Li(+) leads to an increase in the number of Ni(2+) ions. Interestingly, the level of Li(+)/Ni(2+) disordering decreases with an increase in Ni(2+) content determined by the I003/I104 ratio in the X-ray diffraction patterns. The electrochemical measurement shows that the cycling stability and rate capability improve with an increase in Ni(2+) content. After cycling, electrochemical impedance spectroscopy shows decreased charge transfer resistance, and the XRD patterns exhibit an increased I003/I104 ratio with an increase in Ni(2+) content, reflecting the decrease in the level of Li(+)/Ni(2+) disorder during cycling.

Atomic-scale structure evolution in a quasi-equilibrated electrochemical process of electrode materials for rechargeable batteries

Lithium-ion batteries have proven to be extremely attractive candidates for applications in portable electronics, electric vehicles, and smart grid in terms of energy density, power density, and service life. Further performance optimization to satisfy ever-increasing demands on energy storage of such applications is highly desired. In most of cases, the kinetics and stability of electrode materials are strongly correlated to the transport and storage behaviors of lithium ions in the lattice of the host. Therefore, information about structural evolution of electrode materials at an atomic scale is always helpful to explain the electrochemical performances of batteries at a macroscale. The annular-bright-field (ABF) imaging in aberration-corrected scanning transmission electron microscopy (STEM) allows simultaneous imaging of light and heavy elements, providing an unprecedented opportunity to probe the nearly equilibrated local structure of electrode materials after electrochemical cycling at atomic resolution. Recent progress toward unraveling the atomic-scale structure of selected electrode materials with different charge and/or discharge state to extend the current understanding of electrochemical reaction mechanism with the ABF and high angle annular dark field STEM imaging is presented here. Future research on the relationship between atomic-level structure evolution and microscopic reaction mechanisms of electrode materials for rechargeable batteries is envisaged.

Using molecular dynamics to quantify the electrical double layer and examine the potential for its direct observation in the in-situ TEM

Understanding the fundamental processes taking place at the electrode-electrolyte interface in batteries will play a key role in the development of next generation energy storage technologies. One of the most fundamental aspects of the electrode-electrolyte interface is the electrical double layer (EDL). Given the recent development of high spatial resolution in-situ electrochemical fluid cells for scanning transmission electron microscopy (STEM), there now exists the possibility that we can directly observe the formation and dynamics of the EDL. In this paper we predict electrolyte structure within the EDL using classical models and atomistic Molecular Dynamics (MD) simulations. Classical models are found to greatly differ from MD in predicted concentration profiles. It is thus suggested that MD must be used in order to accurately predict STEM images of the electrode-electrolyte interface. Using MD and image simulation together for a high contrast electrolyte (the high atomic number CsCl electrolyte), it is determined that, for a smooth interface, concentration profiles within the EDL should be visible experimentally. When normal experimental parameters such as rough interfaces and low-Z electrolytes (like those used in Li-ion batteries) are considered, observation of the EDL appears to be more difficult.

Rapid and efficient redox processes within 2D covalent organic framework thin films

Two-dimensional covalent organic frameworks (2D COFs) are ideally suited for organizing redox-active subunits into periodic, permanently porous polymer networks of interest for pseudocapacitive energy storage. Here we describe a method for synthesizing crystalline, oriented thin films of a redox-active 2D COF on Au working electrodes. The thickness of the COF film was controlled by varying the initial monomer concentration. A large percentage (80-99%) of the anthraquinone groups are electrochemically accessible in films thinner than 200 nm, an order of magnitude improvement over the same COF prepared as a randomly oriented microcrystalline powder. As a result, electrodes functionalized with oriented COF films exhibit a 400% increase in capacitance scaled to electrode area as compared to those functionalized with the randomly oriented COF powder. These results demonstrate the promise of redox-active COFs for electrical energy storage and highlight the importance of controlling morphology for optimal performance.

Slurryless Li2S/reduced graphene oxide cathode paper for high-performance lithium sulfur battery

Lithium sulfide (Li2S) is a promising cathode material for Li-S batteries with high capacity (theoretically 1166 mAh g(-1)) and can be paired with nonlithium-metal anodes to avoid potential safety issues. However, the cycle life of coarse Li2S particles suffers from poor electronic conductivity and polysulfide shuttling. Here, we develop a flexible slurryless nano-Li2S/reduced graphene oxide cathode paper (nano-Li2S/rGO paper) by simple drop-coating. The Li2S/rGO paper can be directly used as a free-standing and binder-free cathode without metal substrate, which leads to significant weight savings. It shows excellent rate capability (up to 7 C) and cycle life in coin cell tests due to the high electron conductivity, flexibility, and strong solvent absorbency of rGO paper. The Li2S particles that precipitate out of the solvent on rGO have diameters 25-50 nm, which is in contrast to the 3-5 μm coarse Li2S particles without rGO.

Encapsulation of S/SWNT with PANI web for enhanced rate and cycle performance in lithium sulfur batteries

Lithium-sulfur batteries show great potential to compete with lithium-ion batteries due to the fact that sulfur can deliver a high theoretical capacity of 1672 mAh/g and a high theoretical energy density of 2500 Wh/kg. But it has several problems to be solved in order to achieve high sulfur utilization with high Coulombic efficiency and long cycle life of Li-S batteries. These problems are mainly caused by the dissoluble polysulfide species, which are a series of complex reduced sulfur products, associating with shuttle effect between electrodes as well as side reactions on lithium metal anode. To alleviate these challenges, we developed a sulfur-carbon nanotube (S/SWNT) composite coated with polyaniline (PANI) polymer as polysulfide block to achieve high sulfur utilization, high Coulombic efficiency, and long cycle life. The PANI coated S/SWNT composite showed a superior specific capacity of 1011 mAh/g over 100 cycles and a good rate retention, demonstrating the synergic contribution of porous carbon and conducting polymer protection to address challenges underlying sulfur cathode.

Silica nanonetwork confined in nitrogen-doped ordered mesoporous carbon framework for high-performance lithium-ion battery anodes

A new class of nitrogen-doped ordered mesoporous carbon/silica (N-OMC/SiO2) nanocomposites was successfully fabricated via a multi-constituent co-assembly strategy. The N-OMC/SiO2 nanocomposite presented a unique interpenetrating carbon/silica structure whose carbon/silica interface is highly uniform, and thus demonstrated high capacity, good cycling and excellent rate properties.

Approaching the downsizing limit of silicon for surface-controlled lithium storage

Graphene-sheet-supported uniform ultrasmall (≈3 nm) silicon quantum dots have been successfully synthesized by a simple and effective self-assembly strategy, exhibiting unprecedented fast, surface-controlled lithium-storage behavior and outstanding lithium-storage properties including extraordinary rate capability and remarkable cycling stability, attributable to the intrinsic role of approaching the downsizing limit of silicon.

Cylindrical nanostructured MoS2 directly grown on CNT composites for lithium-ion batteries

Direct attachment of MoS2 to materials with carbonaceous architecture remains a major challenge because of non-intimate contact between the carbonaceous materials and active MoS2 material. In this study, we report a new unique synthetic method to produce a new type of hybrid nanostructure of MoS2-CNTs composites. We developed a novel strategy for the synthesis of cylindrical MoS2 directly grown on CNT composites without the use of any other additives, exhibiting superior electrochemical performance as the anode material of lithium-ion batteries via a microwave irradiation technique. We adopted a simple step-by-step method: coating sulfur on CNTs and then reaction with a Mo source to synthesize hybrid cylindrical nanostructures of the MoS2-CNT composite. X-ray diffraction, field emission scanning electron microscopy, and high-resolution transmission electron microscopy analyses demonstrated that the as-synthesized MoS2-CNTs possessed a hybrid nanostructure, in which MoS2 sheets were well attached to the CNTs. The directly attached MoS2 sheets on the CNTs showed superior electrochemical performance as anode materials in a lithium-ion battery.

A gum-like lithium-ion battery based on a novel arched structure

Stretchable lithium-ion batteries (LIBs) consisting of an arch structure and a stretchable anode and cathode are developed using a general strategy. The LIB maintains a remarkable and stable electrochemical performance after hundreds of stretching cycles at a strain of 400%. Compared with other stretchable LIBs, which stretch at the device level, but whose components (electrodes) remain rigid, the component-level stretchability is here the design key to the LIB's highly stable performance.