Building biomedical materials using photochemical bond cleavage

Recent advances in light-responsive on-demand drug-delivery systems

The convergence of wearable sensors and personalized medicine enhance the ability to sense and control the drug composition and dosage, as well as location and timing of administration. To date, numerous stimuli-triggered smart drug-delivery systems have been developed to detect changes in light, pH, temperature, biomolecules, electric field, magnetic field, ultrasound and mechanical forces. This review examines the major advances within the last 5 years for the three most common light-responsive drug delivery-on-demand strategies: photochemical, photoisomerization and photothermal. Examples are highlighted to illustrate progress of each strategy in drug delivery applications, and key limitations are identified to motivate future research to advance this important field.

Green-Light-Sensitive BODIPY Photoprotecting Groups for Amines

We describe a series of easily accessible, visible-light-sensitive (λ > 500 nm) BODIPY (boron-dipyrromethene)-based photoprotecting groups (PPGs) for primary and secondary amines, based on a carbamate linker. The caged compounds are stable under aqueous conditions for 24 h and can be efficiently uncaged in vitro with visible light (λ = 530 nm). These properties allow efficient photodeprotection of amines, rendering these novel PPGs potentially suitable for various applications, including the delivery of caged drugs and their remote activation.

Therapeutic Nanosystem Consisting of Singlet-Oxygen-Responsive Prodrug and Photosensitizer Excited by Two-Photon Light

Using light as the sole stimulus and employing the generated singlet oxygen as a therapeutic agent and the trigger to activate chemo-drug release could serve as an elegant way to bring into full play the advantageous features of light and enhance therapeutic efficacy through a combination of chemotherapy and photodynamic therapy. Herein a liposomal drug system has been developed by embedding a fluorescent photosensitizer and a prodrug into phospholipid vesicles. Upon one- or two-photon light irradiation, the photosensitizer generates singlet oxygen, which removes the protecting group of the prodrug and subsequently causes the release of the active drug chlorambucil. With the combined action of O21 and chlorambucil, highly controllable cytotoxicity toward cancer cells was achieved. In addition, the fluorescent photosensitizer gives out fluorescent signal acting as the drug monitoring agent. This strategy may provide an efficient approach for cancer treatment and some useful insights for designing light-stimulated on-demand therapeutic systems.

Light-Responsive Nanoparticles for Highly Efficient Cytoplasmic Delivery of Anticancer Agents

Stimuli-responsive nanostructures have shown great promise for intracellular delivery of anticancer compounds. A critical challenge remains in the exploration of stimuli-responsive nanoparticles for fast cytoplasmic delivery. Herein, near-infrared (NIR) light-responsive nanoparticles were rationally designed to generate highly efficient cytoplasmic delivery of anticancer agents for synergistic thermo-chemotherapy. The drug-loaded polymeric nanoparticles of selenium-inserted copolymer (I/D-Se-NPs) were rapidly dissociated in several minutes through reactive oxygen species (ROS)-mediated selenium oxidation upon NIR light exposure, and this irreversible dissociation of I/D-Se-NPs upon such a short irradiation promoted continuous drug release. Moreover, I/D-Se-NPs facilitated cytoplasmic drug translocation through ROS-triggered lysosomal disruption and thus resulted in highly preferable distribution to the nucleus even in 5 min postirradiation, which was further integrated with light-triggered hyperthermia for achieving synergistic tumor ablation without tumor regrowth.

Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment

The cell microenvironment has emerged as a key determinant of cell behavior and function in development, physiology, and pathophysiology. The extracellular matrix (ECM) within the cell microenvironment serves not only as a structural foundation for cells but also as a source of three-dimensional (3D) biochemical and biophysical cues that trigger and regulate cell behaviors. Increasing evidence suggests that the 3D character of the microenvironment is required for development of many critical cell responses observed in vivo, fueling a surge in the development of functional and biomimetic materials for engineering the 3D cell microenvironment. Progress in the design of such materials has improved control of cell behaviors in 3D and advanced the fields of tissue regeneration, in vitro tissue models, large-scale cell differentiation, immunotherapy, and gene therapy. However, the field is still in its infancy, and discoveries about the nature of cell-microenvironment interactions continue to overturn much early progress in the field. Key challenges continue to be dissecting the roles of chemistry, structure, mechanics, and electrophysiology in the cell microenvironment, and understanding and harnessing the roles of periodicity and drift in these factors. This review encapsulates where recent advances appear to leave the ever-shifting state of the art, and it highlights areas in which substantial potential and uncertainty remain.

Spatially and Temporally Controlled Hydrogels for Tissue Engineering

Recent years have seen tremendous advances in the field of hydrogel-based biomaterials. One of the most prominent revolutions in this field has been the integration of elements or techniques that enable spatial and temporal control over hydrogels' properties and functions. Here, we critically review the emerging progress of spatiotemporal control over biomaterial properties towards the development of functional engineered tissue constructs. Specifically, we will highlight the main advances in the spatial control of biomaterials, such as surface modification, microfabrication, photo-patterning, and three-dimensional (3D) bioprinting, as well as advances in the temporal control of biomaterials, such as controlled release of molecules, photocleaving of proteins, and controlled hydrogel degradation. We believe that the development and integration of these techniques will drive the engineering of next-generation engineered tissues.

Phototriggered Ring-Opening Polymerization of a Photocaged l-Lysine N-Carboxyanhydride to Synthesize Hyperbranched and Linear Polypeptides

Increasing efforts are being made on controlled photopolymerization methodologies; however, the previous polymerization systems need additional photoactive initiators or catalysts. The controlled synthesis of the hyperbranched polypeptide is still challenging, and developing a photopolymerization method to prepare a hyperbranched polypeptide is urgent for constructing biodegradable polymers and biomaterials. Without addition of any initiator/catalyst, we combine the inimer (initiator + monomer) ring-opening polymerization (ROP) and photocaged chemistry to prepare hyperbranched and linear polypeptides. The photocaged Nε-(o-nitrobenzyloxycarbonyl)-l-lysine-N-carboxyanhydride possesses intrinsic photosensitivity and will be transformed into an activated AB* inimer-type α-amino acid N-carboxyanhydride (NCA) containing a primary ε-amine, which further triggers ROP to produce linear and/or hyperbranched polypeptides in one pot and at room temperature. The microstructure and topology of the resulting polypeptide were clarified by means of mass spectroscopy and various NMR techniques including ¹H NMR, ¹H, ¹H-COSY, and quantitative ¹³C NMR. By tuning the UV irradiation time or intensity, this methodology can produce a linear polypeptide with a high M_w,GPC of 109 kDa and/or (hyper)branched counterparts with tunable M_w,GPC's of 1.4-73.5 kDa and degree of branching of 0.09-0.60.

Self-Reporting Fluorescent Step-Growth RAFT Polymers Based on Nitrile Imine-Mediated Tetrazole-ene Cycloaddition Chemistry

We introduce an inherently fluorescent self-reporting step-growth polymer system as well as a fluorescence-based methodology for accessing the kinetics of the underpinning photoinduced nitrile imine-mediated tetrazole-ene cycloaddition (NITEC) process, using an equimolar mixture of a bismaleimide linker and a bifunctional α,ω-tetrazole-chain transfer agent (CTA). Similarly, α,ω-tetrazole-capped polystyrene, prepared via RAFT polymerization, was employed as a photoreactive macromonomer. Upon UV irradiation, the tetrazole moiety readily reacts with activated dialkenes producing the fluorescent pyrazoline-containing polymer. Thus, the fluorescence emission of the step-growth polymers is directly correlated with the number of ligation points in the polymer, forming an ideal self-reporting sensor system. The viability of the fluorescence-based quantification is verified via NMR spectroscopy, evidencing that fluorescence-based polymerization monitoring is a viable avenue in cases where NMR spectroscopy is difficult to conduct.

Polymeric Biomaterials: Diverse Functions Enabled by Advances in Macromolecular Chemistry

Biomaterials have been extensively used to leverage beneficial outcomes in various therapeutic applications, such as providing spatial and temporal control over the release of therapeutic agents in drug delivery as well as engineering functional tissues and promoting the healing process in tissue engineering and regenerative medicine. This perspective presents important milestones in the development of polymeric biomaterials with defined structures and properties. Contemporary studies of biomaterial design have been reviewed with focus on constructing materials with controlled structure, dynamic functionality, and biological complexity. Examples of these polymeric biomaterials enabled by advanced synthetic methodologies, dynamic chemistry/assembly strategies, and modulated cell-material interactions have been highlighted. As the field of polymeric biomaterials continues to evolve with increased sophistication, current challenges and future directions for the design and translation of these materials are also summarized.

Simultaneously Photo-Cleavable and Activatable Prodrug-Backboned Block Copolymer Micelles for Precise Anticancer Drug Delivery

A simultaneously photo-cleavable and activatable prodrug-backboned block copolymer (BCP) micelle strategy is demonstrated. Without light treatment, the micelles stay silent and inactivated, being biocompatible to normal tissues. Concurrent chain cleavage of BCP micelles and the activation of Pt(IV) prodrug could be temporally and spatially triggered by UV or even visible light for precise anticancer drug delivery.

Glycosaminoglycan-Based Biohybrid Hydrogels: A Sweet and Smart Choice for Multifunctional Biomaterials

Glycosaminoglycans (GAGs) govern important functional characteristics of the extracellular matrix (ECM) in living tissues. Incorporation of GAGs into biomaterials opens up new routes for the presentation of signaling molecules, providing control over development, homeostasis, inflammation, and tumor formation and progression. Recent approaches to GAG-based materials are reviewed, highlighting the formation of modular, tunable biohybrid hydrogels by covalent and non-covalent conjugation schemes, including both theory-driven design concepts and advanced processing technologies. Examples of the application of the resulting materials in biomedical studies are provided. For perspective, solid-phase and chemoenzymatic oligosaccharide synthesis methods for GAG-derived motifs, rational and high-throughput design strategies for GAG-based materials, and the utilization of the factor-scavenging characteristics of GAGs are highlighted.

Light-Triggered Release of Biomolecules from Diamond Nanowire Electrodes

The controlled release of biomolecules from a substrate surface is a challenging task. Photocleavable linkers appear as attractive candidates for light-triggered delivery. We show here the possibility of creating photoactivable diamond nanowire interfaces, from which molecules can be photochemically released upon irradiation at 365 nm for several minutes. The approach is based on the covalent modification of boron-doped diamond nanowires (BDD NWs) with o-nitrobenzyl containing ligands, to which different biomolecules can be attached via amide bond formation. The photodecomposition reaction and the subsequent release of small proteins such as lysozyme or enzymes such as horseradish peroxidase (HRP) are investigated using electrochemical impedance spectroscopy. Using a colorimetric assay, we demonstrate that, while complete cleavage of HRP was achieved upon irradiation for 10 min at 1 W cm(-2), this exposure time resulted in a partial loss of enzymatic activity.

Near-Infrared Light-Responsive Hydrogel for Specific Recognition and Photothermal Site-Release of Circulating Tumor Cells

Isolation of single circulating tumor cells (CTCs) from patients is a very challenging technique that may promote the process of individualized antitumor therapies. However, there exist few systems capable of highly efficient capture and release of single CTCs with high viability for downstream analysis and culture. Herein, we designed a near-infrared (NIR) light-responsive substrate for highly efficient immunocapture and biocompatible site-release of CTCs by a combination of the photothermal effect of gold nanorods (GNRs) and a thermoresponsive hydrogel. The substrate was fabricated by imprinting target cancer cells on a GNR-pre-embedded gelatin hydrogel. Micro/nanostructures generated by cell imprinting produce artificial receptors for cancer cells to improve capture efficiency. Temperature-responsive gelatin dissolves rapidly at 37 °C; this allows bulk recovery of captured CTCs at physiological temperature or site-specific release of single CTCs by NIR-mediated photothermal activation of embedded GNRs. Furthermore, the system has been applied to capture, individually release, and genetically analyze CTCs from the whole blood of cancer patients. The multifunctional NIR-responsive platform demonstrates excellent performance in capture and site-release of CTCs with high viability, which provides a robust and versatile means toward individualized antitumor therapies and also shows promising potential for dynamically manipulating cell-substrate interactions in vitro.

Photochemical Microcontact Printing by Tetrazole Chemistry

We developed a simple method to pattern self-assembled monolayers of tetrazole triethoxylsilane with a variety of different molecules by photochemical microcontact printing. Under irradiation, tetrazoles form highly reactive nitrile imines, which react with alkenes, alkynes, and thiols. The covalent linkage to the surface could be unambiguously demonstrated by fluorescence microscopy, because the reaction product is fluorescent in contrast to tetrazole. The modified surfaces were further analyzed by X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), atomic force microscopy (AFM), and contact angle goniometry. Protein-repellent micropatterns, a biotin-streptavidin array, and structured polymer brushes could be fabricated with this straightforward method for surface functionalization.

Visible-Light-Initiated Thiol-Michael Addition Polymerizations with Coumarin-Based Photobase Generators: Another Photoclick Reaction Strategy

An efficient visible-light-sensitive photobase generator for thiol-Michael addition reactions was synthesized and evaluated. This highly reactive catalyst was designed by protecting a strong base (tetramethyl guanidine, TMG) with a visible-light-responsive group which was a coumarin derivative. The coumarin-coupled TMG was shown to exhibit extraordinary catalytic activity toward initiation of the thiol-Michael reaction, including thiol-Michael addition-based polymerization, upon visible-light irradiation, leading to a stoichiometric reaction of both thiol and vinyl functional groups. Owing to its features, this visible-light photobase generator enables homogeneous network formation in thiol-Michael polymerizations and also has the potential to be exploited in other visible-light-induced, base-catalyzed thiol-click processes such as thiol-isocynate and thiol-epoxy network-forming reactions.

Photoluminescence Architectures for Disease Diagnosis: From Graphene to Thin-Layer Transition Metal Dichalcogenides and Oxides

Ever since the discovery of graphene, increasing efforts have been devoted to the use of this stellar material as well as the development of other graphene-like materials such as thin-layer transition metal dichalcogenides and oxides (TMD/Os) for a variety of applications. Because of their large surface area and unique optical properties, these two-dimensional materials with a size ranging from the micro- to the nanoscale have been employed as the substrate to construct photoluminescence architectures for disease diagnosis as well as theranostics. These architectures are built through the simple self-assembly of labeled biomolecular probes with the substrate material, leading to signal quenching. Upon the specific interaction of the architecture with a target biomarker, the signal can be spontaneously restored in a reversible manner. Meanwhile, by co-loading therapeutic agents and employing the inherent photo-thermal properties of the material substrates, a combined disease imaging and therapy (theranostics) can be achieved. This review highlights the latest advances in the construction and application of graphene and TMD/O based thin-layer material composites for single-target and multiplexed detection of a variety of biomarkers and theranostics. These versatile material architectures, owing to their ease in preparation, low cost and flexibility in functionalization, provide promising tools for both basic biochemical research and clinical applications.

Photocages for protection and controlled release of bioactive compounds

A photoactivatable ketoprofen–avobenzone dyad was designed for the protection and controlled release of phototoxic drugs.

Photo-powered stretchable nano-containers based on well-defined vesicles formed by an overcrowded alkene switch

A novel photo-responsive nano-container was successfully constructed based on well-defined vesicles formed by an amphiphilic overcrowded alkene switch.

Photodegradable self-assembling PAMAM dendrons for gene delivery involving dendriplex formation and phototriggered circular DNA release

Photoresponsive amphiphilic dendron bearing a photolabile o-nitrobenzyl group possesses self-assembly, DNA binding and photo-induced release.

Modular Integration of Upconverting Nanocrystal-Dendrimer Composites for Folate Receptor-Specific NIR Imaging and Light-Triggered Drug Release

Upconversion nanocrystals (UCNs) display near-infrared (NIR)-responsive photoluminescent properties for NIR imaging and drug delivery. The development of effective strategies for UCN integration with other complementary nanostructures for targeting and drug conjugation is highly desirable. This study reports on a core/shell-based theranostic system designed by UCN integration with a folate (FA)-conjugated dendrimer for tumor targeting and with photocaged doxorubicin as a cytotoxic agent. Two types of UCNs (NaYF4:Yb/Er (or Yb/Tm); diameter = ≈50 to 54 nm) are described, each displaying distinct emission properties upon NIR (980 nm) excitation. The UCNs are surface modified through covalent attachment of photocaged doxorubicin (ONB-Dox) and a multivalent FA-conjugated polyamidoamine (PAMAM) dendrimer G5(FA)6 to prepare UCN@(ONB-Dox)(G5FA). Surface plasmon resonance experiments performed with G5(FA)6 dendrimer alone show nanomolar binding avidity (KD = 5.9 × 10(-9) M) to the folate binding protein. This dendrimer binding corresponds with selective binding and uptake of UCN@(ONB-Dox)(G5FA) by FAR-positive KB carcinoma cells in vitro. Furthermore, UCN@(ONB-Dox)(G5FA) treatment of FAR(+) KB cells inhibits cell growth in a light dependent manner. These results validate the utility of modularly integrated UCN-dendrimer nanocomposites for cell type specific NIR imaging and light-controlled drug release, thus serving as a new theranostic system.

Click-crosslinkable and photodegradable gelatin hydrogels for cytocompatible optical cell manipulation in natural environment

This paper describes the generation of “click-crosslinkable“ and “photodegaradable“ gelatin hydrogels from the reaction between dibenzocycloctyl-terminated photoclevable tetra-arm polyethylene glycol and azide-modified gelatin. The hydrogels were formed in 30 min through the click-crosslinking reaction. The micropatterned features in the hydrogels were created by micropatterned light irradiation; the minimum resolution of micropatterning was 10-μm widths for line patterns and 20-μm diameters for circle patterns. Cells were successfully encapsulated in the hydrogels without any loss of viability across a wide concentration range of crosslinker. In contrast, an activated-ester-type photocleavable crosslinker, which we previously used to prepare photodegradable gelatin hydrogels, induced a decrease in cell viability at crosslinker concentrations greater than 1.8 mM. We also observed morphology alteration and better growth of cancer cells in the click-crosslinked photodegradable gelatin hydrogels that included matrigel than in the absence of matrigel. We also demonstrated micropatterning of the hydrogels encapsulating cells and optical cell separation. Both of the cells that remained in the non-irradiated area and the cells collected from the irradiated area maintained their viability.

Thiol-ene and photo-cleavage chemistry for controlled presentation of biomolecules in hydrogels

Hydrogels have emerged as promising scaffolds in regenerative medicine for the delivery of biomolecules to promote healing. However, increasing evidence suggests that the context that biomolecules are presented to cells (e.g., as soluble verses tethered signals) can influence their bioactivity. A common approach to deliver biomolecules in hydrogels involves physically entrapping them within the network, such that they diffuse out over time to the surrounding tissues. While simple and versatile, the release profiles in such system are highly dependent on the molecular weight of the entrapped molecule relative to the network structure, and it can be difficult to control the release of two different signals at independent rates. In some cases, supraphysiologically high loadings are used to achieve therapeutic local concentrations, but uncontrolled release can then cause deleterious off-target side effects. In vivo, many growth factors and cytokines are stored in the extracellular matrix (ECM) and released on demand as needed during development, growth, and wound healing. Thus, emerging strategies in biomaterial chemistry have focused on ways to tether or sequester biological signals and engineer these bioactive scaffolds to signal to delivered cells or endogenous cells. While many strategies exist to achieve tethering of peptides, protein, and small molecules, this review focuses on photochemical methods, and their usefulness as a mild reaction that proceeds with fast kinetics in aqueous solutions and at physiological conditions. Photo-click and photo-caging methods are particularly useful because one can direct light to specific regions of the hydrogel to achieve spatial patterning. Recent methods have even demonstrated reversible introduction of biomolecules to mimic the dynamic changes of native ECM, enabling researchers to explore how the spatial and dynamic context of biomolecular signals influences important cell functions. This review will highlight how two photochemical methods have led to important advances in the tissue regeneration community, namely the thiol-ene photo-click reaction for bioconjugation and photocleavage reactions that allow for the removal of protecting groups. Specific examples will be highlighted where these methodologies have been used to engineer hydrogels that control and direct cell function with the aim of inspiring their use in regenerative medicine.

Photoresponsive immunomagnetic nanocarrier for capture and release of rare circulating tumor cells

7-Aminocoumarin compound was synthesized and used as phototrigger to cage EpCAM-antibody to construct a photocontrolled CTCs capture and release system.

Isolation, release and culture of rare circulating tumor cells (CTCs) may, if implemented, promote the progress of individualized anti-tumor therapies. To realize the release of CTCs without disruption of their viability for further culture and analysis, we designed an effective photocontrolled CTC capture/release system by combination of photochemistry and immunomagnetic separation. 7-Aminocoumarin was synthesized as the phototrigger to bridge the connection between the anti-EpCAM antibody and the magnetic beads. The coumarin moieties produced cleavage of a C–O bond under both ultraviolet (UV) and near-infrared (NIR) light illumination, breaking the bridge and releasing CTCs from the immunomagnetic beads. Compared with conventional immunomagnetic separation systems, the negative influence of absorbed immunomagnetic beads on further CTCs culture and analysis was effectively eliminated. The system can specifically recognize 10² MCF-7 cells in 1 mL of human whole blood samples with 90% efficiency and 85% purity. Under the irradiation of UV and NIR light, 73 ± 4% and 52 ± 6% of captured cells were released with a viability of 90% and 97%, respectively. Furthermore, this technique has been used to detect CTCs from whole blood of cancer patients with high purity. This study demonstrates that the photochemical-based immunomagnetic separation method for isolating, releasing and culturing CTCs from clinic patients may provide new opportunities for cancer diagnosis and personalized therapy.

Photoresponsive polymers based on a coumarin moiety for the controlled release of pesticide 2,4-D

We report an excellent photoresponsive controlled release formulation based on a coumarin copolymer for pesticide 2,4-D.