Metabolic engineering of yeast for production of fuels and chemicals

The heterologous production of terpenes by the thermophile Parageobacillus thermoglucosidasius in a consolidated bioprocess using waste bread

Parageobacillus thermoglucosidasius is a genetically tractable thermophile that grows rapidly at elevated temperatures, with a doubling time at 65 °C comparable to the shortest doubling times of Escherichia coli. It is capable of using a wide variety of substrates, including carbohydrate oligomers, and has been developed for the industrial production of ethanol. In this study, P. thermoglucosidasius NCIMB11955 has been engineered to produce the sesquiterpene τ-muurolol by introduction of a heterologous mevalonate pathway constructed using genes from several thermophilic archaea together with a recently characterised thermostable τ-muurolol synthase. P. thermoglucosidasius naturally uses the methylerythritol phosphate pathway for production of the terpene precursor, isopentenyl pyrophosphate, while archaea use a version of the mevalonate pathway. By introducing the orthogonal archaeal pathway it was possible to increase the flux through to sesquiterpene biosynthesis. Construction of such a large metabolic pathway created problems with genetic vector introduction and stability, so recombinant plasmids were introduced by conjugation, and a thermostable serine integrase system was developed for integration of large pathways onto the chromosome. Finally, by making the heterologous pathway maltose-inducible we demonstrate that the new strain is capable of using waste bread directly as an autoinduction carbon source for the production of terpenes in a consolidated bioprocess.

Recent Advances in Developing Artificial Autotrophic Microorganism for Reinforcing CO2 Fixation

With the goal of achieving carbon sequestration, emission reduction and cleaner production, biological methods have been employed to convert carbon dioxide (CO2) into fuels and chemicals. However, natural autotrophic organisms are not suitable cell factories due to their poor carbon fixation efficiency and poor growth rate. Heterotrophic microorganisms are promising candidates, since they have been proven to be efficient biofuel and chemical production chassis. This review first briefly summarizes six naturally occurring CO2 fixation pathways, and then focuses on recent advances in artificially designing efficient CO2 fixation pathways. Moreover, this review discusses the transformation of heterotrophic microorganisms into hemiautotrophic microorganisms and delves further into fully autotrophic microorganisms (artificial autotrophy) by use of synthetic biological tools and strategies. Rapid developments in artificial autotrophy have laid a solid foundation for the development of efficient carbon fixation cell factories. Finally, this review highlights future directions toward large-scale applications. Artificial autotrophic microbial cell factories need further improvements in terms of CO2 fixation pathways, reducing power supply, compartmentalization and host selection.

Reconstruction and analysis of genome-scale metabolic model of weak Crabtree positive yeast Lachancea kluyveri

Lachancea kluyveri, a weak Crabtree positive yeast, has been extensively studied for its unique URC pyrimidine catabolism pathway. It produces more biomass than Saccharomyces cerevisiae due to the underlying weak Crabtree effect and resorts to fermentation only in oxygen limiting conditions that renders it as a suitable industrial host. The yeast also produces ethyl acetate as a major overflow metabolite in aerobic conditions. Here, we report the first genome-scale metabolic model, iPN730, of L. kluyveri comprising of 1235 reactions, 1179 metabolites, and 730 genes distributed in 8 compartments. The in silico viability in different media conditions and the growth characteristics in various carbon sources show good agreement with experimental data. Dynamic flux balance analysis describes the growth dynamics, substrate utilization and product formation kinetics in various oxygen-limited conditions. We have also demonstrated the effect of switching carbon sources on the production of ethyl acetate under varying oxygen uptake rates. A phenotypic phase plane analysis described the energetic cost penalty of ethyl acetate and ethanol production on the specific growth rate of L. kluyveri. We generated the context specific models of L. kluyveri growing on uracil or ammonium salts as the sole nitrogen source. Differential flux calculated using flux variability analysis helped us in highlighting pathways like purine, histidine, riboflavin and pyrimidine metabolism associated with uracil degradation. The genome-scale metabolic construction of L. kluyveri will provide a better understanding of metabolism behind ethyl acetate production as well as uracil catabolism (pyrimidine degradation) pathway. iPN730 is an addition to genome-scale metabolic models of non-conventional yeasts that will facilitate system-wide omics analysis to understand fungal metabolic diversity.

CRISPR-Cas9 Genome Editing Tool for the Production of Industrial Biopharmaceuticals

A broad range of cell lines with characteristic features are used as bio-factories to produce recombinant proteins for basic research and therapeutic purposes. Genetic engineering strategies have been used to manipulate the genome of mammalian cells, insects, and yeasts for heterologous expression. One reason is that the glycosylation pattern of the expression hosts differs somehow from mammalian cells, which may cause immunogenic reactions upon administration in humans. CRISPR-Cas9 is a simple, efficient, and versatile genome engineering tool that can be programmed to precisely make double-stranded breaks at the desired loci. Compared to the classical genome editing methods, a CRISPR-Cas9 system is an ideal tool, providing the opportunity to integrate or delete genes from the target organisms. Besides broadened applications, limited studies have used CRISPR-Cas9 for editing the endogenous pathways in expression systems for biopharmaceutical applications. In the present review, we discuss the use of CRISPR-Cas9 in expression systems to improve host cell lines, increase product yield, and humanize glycosylation pathways by targeting intrinsic genes.

Lager-brewing yeasts in the era of modern genetics

The yeast Saccharomyces pastorianus is responsible for the annual worldwide production of almost 200 billion liters of lager-type beer. S. pastorianus is a hybrid of Saccharomyces cerevisiae and Saccharomyces eubayanus that has been studied for well over a century. Scientific interest in S. pastorianus intensified upon the discovery, in 2011, of its S. eubayanus ancestor. Moreover, advances in whole-genome sequencing and genome editing now enable deeper exploration of the complex hybrid and aneuploid genome architectures of S. pastorianus strains. These developments not only provide novel insights into the emergence and domestication of S. pastorianus but also generate new opportunities for its industrial application. This review paper combines historical, technical and socioeconomic perspectives to analyze the evolutionary origin and genetics of S. pastorianus. In addition, it provides an overview of available methods for industrial strain improvement and an outlook on future industrial application of lager-brewing yeasts. Particular attention is given to the ongoing debate on whether current S. pastorianus originates from a single or multiple hybridization events and to the potential role of genome editing in developing industrial brewing yeast strains.

Polyunsaturated fatty acids-enriched lipid from reduced sugar alcohol mannitol by marine yeast Rhodosporidiobolus fluvialis Y2

Brown macroalgae is a promising marine biomass for the production of bioethanol and biodiesel fuels. Here we investigate the biochemical processes used by marine oleaginous yeast for assimilating the major carbohydrate found in brown macroalgae. Briefly, yeast Rhodosporidiobolus fluvialis strain Y2 was isolated from seawater and grown in minimal medium containing reduced sugar alcohol mannitol as the sole carbon source with a salinity comparable to seawater. Conditions limiting nitrogen were used to facilitate lipid synthesis. R. fluvialis Y2 yielded 55.1% (w/w) and 39.1% (w/w) of lipids, per dry cell weight, from mannitol in the absence and presence of salinity, respectively. Furthermore, mannitol, as a sugar source, led to an increase in the composition of polyunsaturated fatty acids, linoleic acid (C18:2) and linolenic acid (C18:3), compared to glucose. This suggests that oxidation of mannitol leads to the activation of NADH-dependent fatty acid desaturases in R. fluvialis Y2. Such fatty acid composition may contribute to the cold-flow properties of biodiesel fuels. Our results identified a salt-tolerant oleaginous yeast species with unique metabolic traits, demonstrating a key role as a decomposer in the global carbon cycle through marine ecosystems. This is the first study on mannitol-induced synthesis of lipids enriched with polyunsaturated fatty acids by marine yeast.

Cannabinomics: Application of Metabolomics in Cannabis (Cannabis sativa L.) Research and Development

Cannabis (Cannabis sativa L.) is a complex, polymorphic plant species, which produces a vast array of bioactive metabolites, the two major chemical groups being cannabinoids and terpenoids. Nonetheless, the psychoactive cannabinoid tetrahydrocannabinol (Δ 9 -THC) and the non-psychoactive cannabidiol (CBD), are the two major cannabinoids that have monopolized the research interest. Currently, more than 600 Cannabis varieties are commercially available, providing access to a multitude of potent extracts with complex compositions, whose genetics are largely inconclusive. Recently introduced legislation on Cannabis cultivation in many countries represents a great opportunity, but at the same time, a great challenge for Cannabis research and development (R&D) toward applications in the pharmaceutical, food, cosmetics, and agrochemical industries. Based on its versatility and unique capabilities in the deconvolution of the metabolite composition of complex matrices, metabolomics represents an ideal bioanalytical tool that could greatly assist and accelerate Cannabis R&D. Among others, Cannabis metabolomics or cannabinomics can be applied in the taxonomy of Cannabis varieties in chemovars, the research on the discovery and assessment of new Cannabis-based sources of bioactivity in medicine, the development of new food products, and the optimization of its cultivation, aiming for improvements in yield and potency. Although Cannabis research is still in its infancy, it is highly foreseen that the employment of advanced metabolomics will provide insights that could assist the sector to face the aforementioned challenges. Within this context, here, the current state-of-the-art and conceptual aspects of cannabinomics are presented.

Engineering Saccharomyces cerevisiae cells for production of fatty acid-derived biofuels and chemicals

The yeast Saccharomyces cerevisiae is a widely used cell factory for the production of fuels and chemicals, in particular ethanol, a biofuel produced in large quantities. With a need for high-energy-density fuels for jets and heavy trucks, there is, however, much interest in the biobased production of hydrocarbons that can be derived from fatty acids. Fatty acids also serve as precursors to a number of oleochemicals and hence provide interesting platform chemicals. Here, we review the recent strategies applied to metabolic engineering of S. cerevisiae for the production of fatty acid-derived biofuels and for improvement of the titre, rate and yield (TRY). This includes, for instance, redirection of the flux towards fatty acids through engineering of the central carbon metabolism, balancing the redox power and varying the chain length of fatty acids by enzyme engineering. We also discuss the challenges that currently hinder further TRY improvements and the potential solutions in order to meet the requirements for commercial application.

Genetic Manipulation of a Lipolytic Yeast Candida aaseri SH14 Using CRISPR-Cas9 System

A lipolytic yeast Candida aaseri SH14 that can utilise long-chain fatty acids as the sole carbon source was isolated from oil palm compost. To develop this strain as a platform yeast for the production of bio-based chemicals from renewable plant oils, a genetic manipulation system using CRISPR-Cas9 was developed. Episomal vectors for expression of Cas9 and sgRNA were constructed using an autonomously replicating sequence isolated from C. aaseri SH14. This system guaranteed temporal expression of Cas9 for genetic manipulation and rapid curing of the vector from transformed strains. A β-oxidation mutant was directly constructed by simultaneous disruption of six copies of acyl-CoA oxidases genes (AOX2, AOX4 and AOX5) in diploid cells using a single sgRNA with 70% efficiency and the Cas9 vector was efficiently removed. Blocking of β-oxidation in the triple AOX mutant was confirmed by the accumulation of dodecanedioic acid from dodecane. Targeted integration of the expression cassette for C. aaseri lipase2 was demonstrated with 60% efficiency using this CRISPR-Cas9 system. This genome engineering tool could accelerate industrial application of C. aaseri SH14 for production of bio-based chemicals from renewable oils.

An Overview of Potential Oleaginous Microorganisms and Their Role in Biodiesel and Omega-3 Fatty Acid-Based Industries

Microorganisms are known to be natural oil producers in their cellular compartments. Microorganisms that accumulate more than 20% w/w of lipids on a cell dry weight basis are considered as oleaginous microorganisms. These are capable of synthesizing vast majority of fatty acids from short hydrocarbonated chain (C6) to long hydrocarbonated chain (C36), which may be saturated (SFA), monounsaturated (MUFA), or polyunsaturated fatty acids (PUFA), depending on the presence and number of double bonds in hydrocarbonated chains. Depending on the fatty acid profile, the oils obtained from oleaginous microorganisms are utilized as feedstock for either biodiesel production or as nutraceuticals. Mainly microalgae, bacteria, and yeasts are involved in the production of biodiesel, whereas thraustochytrids, fungi, and some of the microalgae are well known to be producers of very long-chain PUFA (omega-3 fatty acids). In this review article, the type of oleaginous microorganisms and their expertise in the field of biodiesel or omega-3 fatty acids, advances in metabolic engineering tools for enhanced lipid accumulation, upstream and downstream processing of lipids, including purification of biodiesel and concentration of omega-3 fatty acids are reviewed.

In Vivo Thermodynamic Analysis of Glycolysis in Clostridium thermocellum and Thermoanaerobacterium saccharolyticum Using 13C and 2H Tracers

Thermodynamics constitutes a key determinant of flux and enzyme efficiency in metabolic networks. Here, we provide new insights into the divergent thermodynamics of the glycolytic pathways of C. thermocellum and T. saccharolyticum, two industrially relevant thermophilic bacteria whose metabolism still is not well understood. We report that while the glycolytic pathway in T. saccharolyticum is as thermodynamically favorable as that found in model organisms, such as E. coli or Saccharomyces cerevisiae, the glycolytic pathway of C. thermocellum operates near equilibrium. The use of a near-equilibrium glycolytic pathway, with potentially increased ATP yield, by this cellulolytic microbe may represent an evolutionary adaptation to growth on cellulose, but it has the drawback of being highly susceptible to product feedback inhibition. The results of this study will facilitate future engineering of high-performance strains capable of transforming cellulosic biomass to biofuels at high yields and titers.

Clostridium thermocellum and Thermoanaerobacterium saccharolyticum are thermophilic anaerobic bacteria with complementary metabolic capabilities that utilize distinct glycolytic pathways for the conversion of cellulosic sugars to biofuels. We integrated quantitative metabolomics with ²H and ¹³C metabolic flux analysis to investigate the in vivo reversibility and thermodynamics of the central metabolic networks of these two microbes. We found that the glycolytic pathway in C. thermocellum operates remarkably close to thermodynamic equilibrium, with an overall drop in Gibbs free energy 5-fold lower than that of T. saccharolyticum or anaerobically grown Escherichia coli. The limited thermodynamic driving force of glycolysis in C. thermocellum could be attributed in large part to the small free energy of the phosphofructokinase reaction producing fructose bisphosphate. The ethanol fermentation pathway was also substantially more reversible in C. thermocellum than in T. saccharolyticum. These observations help explain the comparatively low ethanol titers of C. thermocellum and suggest engineering interventions that can be used to increase its ethanol productivity and glycolytic rate. In addition to thermodynamic analysis, we used our isotope tracer data to reconstruct the T. saccharolyticum central metabolic network, revealing exclusive use of the Embden-Meyerhof-Parnas (EMP) pathway for glycolysis, a bifurcated tricarboxylic acid (TCA) cycle, and a sedoheptulose bisphosphate bypass active within the pentose phosphate pathway.

IMPORTANCE Thermodynamics constitutes a key determinant of flux and enzyme efficiency in metabolic networks. Here, we provide new insights into the divergent thermodynamics of the glycolytic pathways of C. thermocellum and T. saccharolyticum, two industrially relevant thermophilic bacteria whose metabolism still is not well understood. We report that while the glycolytic pathway in T. saccharolyticum is as thermodynamically favorable as that found in model organisms, such as E. coli or Saccharomyces cerevisiae, the glycolytic pathway of C. thermocellum operates near equilibrium. The use of a near-equilibrium glycolytic pathway, with potentially increased ATP yield, by this cellulolytic microbe may represent an evolutionary adaptation to growth on cellulose, but it has the drawback of being highly susceptible to product feedback inhibition. The results of this study will facilitate future engineering of high-performance strains capable of transforming cellulosic biomass to biofuels at high yields and titers.

Building cell factories for the production of advanced fuels

Synthetic biology-based engineering strategies are being extensively employed for microbial production of advanced fuels. Advanced fuels, being comparable in energy efficiency and properties to conventional fuels, have been increasingly explored as they can be directly incorporated into the current fuel infrastructure without the need for reconstructing the pre-existing set-up rendering them economically viable. Multiple metabolic engineering approaches have been used for rewiring microbes to improve existing or develop newly programmed cells capable of efficient fuel production. The primary challenge in using these approaches is improving the product yield for the feasibility of the commercial processes. Some of the common roadblocks towards enhanced fuel production include - limited availability of flux towards precursors and desired pathways due to presence of competing pathways, limited cofactor and energy supply in cells, the low catalytic activity of pathway enzymes, obstructed product transport, and poor tolerance of host cells for end products. Consequently, despite extensive studies on the engineering of microbial hosts, the costs of industrial-scale production of most of these heterologously produced fuel compounds are still too high. Though considerable progress has been made towards successfully producing some of these biofuels, a substantial amount of work needs to be done for improving the titers of others. In this review, we have summarized the different engineering strategies that have been successfully used for engineering pathways into commercial hosts for the production of advanced fuels and different approaches implemented for tuning host strains and pathway enzymes for scaling up production levels.

QTL mapping of modelled metabolic fluxes reveals gene variants impacting yeast central carbon metabolism

The yeast Saccharomyces cerevisiae is an attractive industrial microorganism for the production of foods and beverages as well as for various bulk and fine chemicals, such as biofuels or fragrances. Building blocks for these biosyntheses are intermediates of yeast central carbon metabolism (CCM), whose intracellular availability depends on balanced single reactions that form metabolic fluxes. Therefore, efficient product biosynthesis is influenced by the distribution of these fluxes. We recently demonstrated great variations in CCM fluxes between yeast strains of different origins. However, we have limited understanding of flux modulation and the genetic basis of flux variations. In this study, we investigated the potential of quantitative trait locus (QTL) mapping to elucidate genetic variations responsible for differences in metabolic flux distributions (fQTL). Intracellular metabolic fluxes were estimated by constraint-based modelling and used as quantitative phenotypes, and differences in fluxes were linked to genomic variations. Using this approach, we detected four fQTLs that influence metabolic pathways. The molecular dissection of these QTLs revealed two allelic gene variants, PDB1 and VID30, contributing to flux distribution. The elucidation of genetic determinants influencing metabolic fluxes, as reported here for the first time, creates new opportunities for the development of strains with optimized metabolite profiles for various applications.

Advances in microbial production of medium-chain dicarboxylic acids for nylon materials

Medium-chain dicarboxylic acids (MDCAs) are widely used in the production of nylon materials, and among which, succinic, glutaric, adipic, pimelic, suberic, azelaic and sebacic acids are particularly important for that purpose.

Deletion of Atg22 gene contributes to reduce programmed cell death induced by acetic acid stress in Saccharomyces cerevisiae

BACKGROUND

Programmed cell death (PCD) induced by acetic acid, the main by-product released during cellulosic hydrolysis, cast a cloud over lignocellulosic biofuel fermented by Saccharomyces cerevisiae and became a burning problem. Atg22p, an ignored integral membrane protein located in vacuole belongs to autophagy-related genes family; prior study recently reported that it is required for autophagic degradation and efflux of amino acids from vacuole to cytoplasm. It may alleviate the intracellular starvation of nutrition caused by Ac and increase cell tolerance. Therefore, we investigate the role of atg22 in cell death process induced by Ac in which attempt is made to discover new perspectives for better understanding of the mechanisms behind tolerance and more robust industrial strain construction.

RESULTS

In this study, we compared cell growth, physiological changes in the absence and presence of Atg22p under Ac exposure conditions. It is observed that disruption and overexpression of Atg22p delays and enhances acetic acid-induced PCD, respectively. The deletion of Atg22p in S. cerevisiae maintains cell wall integrity, and protects cytomembrane integrity, fluidity and permeability upon Ac stress by changing cytomembrane phospholipids, sterols and fatty acids. More interestingly, atg22 deletion increases intracellular amino acids to aid yeast cells for tackling amino acid starvation and intracellular acidification. Further, atg22 deletion upregulates series of stress response genes expression such as heat shock protein family, cell wall integrity and autophagy.

CONCLUSIONS

The findings show that Atg22p possessed the new function related to cell resistance to Ac. This may help us have a deeper understanding of PCD induced by Ac and provide a new strategy to improve Ac resistance in designing industrial yeast strains for bioethanol production during lignocellulosic biofuel fermentation.

Utility of Feed Enzymes and Yeast Derivatives in Ameliorating Deleterious Effects of Coccidiosis on Intestinal Health and Function in Broiler Chickens

Coccidiosis induced necrotic lesions impair digestive capacity and barrier function in concurrence with increased risks for secondary bacterial infections. The industry has been successful in controlling coccidiosis with anticoccidials and vaccination. However, concerns over Eimeria species resistant to anticoccidials, gaps in vaccination and restriction on antibiotics is stimulating research and application of alternative and/or complimentary strategies for coccidiosis control. The aim of this paper is to appraise literature on the utility of feed enzymes and yeast derivatives in modulating coccidiosis. Feed enzymes can complement endogenous enzymes (protease, amylase, and lipase) that may become insufficient in coccidiosis afflicted birds. Coccidiosis in the upper small intestine creates conditions that enhances efficacy of phytase and there are reports indicating supplemental phytase can mitigate the negative impact of coccidiosis on bone quality. Increase in intestinal short chain fatty acids due supplemental fiber degrading enzymes has been linked with reduced survivability of Eimeria. There is evidence whole yeast (live or dead) and derivatives can modulate coccidiosis. Immunomudulation properties of the yeast derivatives have been shown to enhance cellular and humoral immunity in Eimeria challenge models which is critical for effectiveness of coccidial vaccination. Moreover, yeast nucleotides have been shown to be beneficial in stimulating healing of intestinal mucosal surface. Other novel work has shown that certain yeast cells can produce derivatives with anticoccidial compounds effective in attenuating oocysts shedding. Yeast cell surface has also been shown to be an effective oral Eimeria vaccine delivery vehicle. Overall, while further refinement research is warranted to address inconsistencies in responses and commercial application, there is evidence feed enzymes and yeast derivatives could complement strategies for maintaining intestinal function to bolster growth performance in broilers compromised with coccidiosis. However, broilers receive diets containing several feed additives with distinct mode of actions and yet there is dearth of empirical data on the expected responses.Future evaluations should consider combinations of additives to document animal responses and potential synergies.

Involvement of the external mitochondrial NADH dehydrogenase Nde1 in glycerol metabolism by wild-type and engineered Saccharomyces cerevisiae strains

Glycerol is an attractive substrate for microbial fermentations due to its higher degree of reduction compared to glucose. The replacement of the native FAD-dependent glycerol catabolic pathway in Saccharomyces cerevisiae by an artificial NADH-delivering dihydroxyacetone (DHA) pathway is supposed to facilitate the capturing of electrons in fermentation products. This requires that the electrons from the cytosolic NADH are not exclusively transferred to oxygen. However, the external NADH dehydrogenases (Nde1/2) and the L-glycerol 3-phosphate shuttle (composed of Gpd1/2 and Gut2), both coupled to the respiratory chain, are known to contribute to cytosolic NAD+ regeneration during growth on non-fermentable carbon sources. In order to evaluate the role of these mechanisms during growth on glycerol, we deleted GPD1/2, GUT2 as well as NDE1/2, separately and in combinations in both the glycerol-utilizing wild-type strain CBS 6412-13A and the corresponding engineered strain CBS DHA in which glycerol is catabolized by the DHA pathway. Particularly, the nde1Δ mutants showed a significant reduction in growth rate and the nde1∆ nde2∆ double deletion mutants did not grow at all in synthetic glycerol medium. The current work also demonstrates a positive impact of deleting NDE1 on the production of the fermentation product 1,2-propanediol in an accordingly engineered S. cerevisiae strain.

Uncovering the reactive nature of 4-deoxy-L-erythro-5-hexoseulose uronate for the utilization of alginate, a promising marine biopolymer

Alginate is a linear polyuronate in brown macroalgae. It is also a promising marine biopolymer that can be degraded by exo-type alginate lyase into an unsaturated uronate that is non-enzymatically or enzymatically converted to 4-deoxy-L-erythro-5-hexoseulose uronate (DEH). In a bioengineered yeast Saccharomyces cerevisiae (DEH++) strain that utilizes DEH, DEH is not only an important physiological metabolite but also a promising carbon source for biorefinery systems. In this study, we uncovered the essential chemical nature of DEH. In particular, we showed that DEH non-enzymatically reacts with specific amino groups in Tris, ammonium salts [(NH4)2SO4 and NH4Cl], and certain amino acids (e.g., Gly, Ser, Gln, Thr, and Lys) at 30 °C and forms other compounds, one of which we tentatively named DEH-related product-1 (DRP-1). In contrast, Asn, Met, Glu, and Arg were almost inert and Ala, Pro, Leu, Ile, Phe, Val, and Asp, as well as sodium nitrate (NaNO3), were inert in the presence of DEH. Some of the above amino acids (Asn, Glu, Ala, Pro, Phe, and Asp) were suitable nitrogen sources for the DEH++ yeast strain, whereas ammonium salts and Ser, Gln, and Thr were poor nitrogen sources owing to their high reactivity to DEH. Nutrient-rich YP medium with 1% (w/v) Yeast extract and 2% (w/v) Tryptone, as well as 10-fold diluted YP medium, could also be effectively used as nitrogen sources. Finally, we identified DRP-1 as a 2-furancarboxylic acid and showed that it has a growth-inhibitory effect on the DEH++ yeast strain. These results show the reactive nature of DEH and suggest a basis for selecting nitrogen sources for use with DEH and alginate in biorefineries. Our results also provide insight into the physiological utilization of DEH. The environmental source of 2-furancarboxylic acid is also discussed.

Saccharomyces cerevisiae exhibiting a modified route for uptake and catabolism of glycerol forms significant amounts of ethanol from this carbon source considered as 'non-fermentable'

BACKGROUND

Due to its inevitable formation during biodiesel production and its relatively high degree of reduction, glycerol is an attractive carbon source for microbial fermentation processes. However, glycerol is catabolized in a fully respiratory manner by the eukaryotic platform organism Saccharomyces cerevisiae. We previously engineered S. cerevisiae strains to favor fermentative metabolism of glycerol by replacing the native FAD-dependent glycerol catabolic pathway with the NAD-dependent 'DHA pathway'. In addition, a heterologous aquaglyceroporin (Fps1 homolog) was expressed to facilitate glycerol uptake. The current study was launched to scrutinize the formation of S. cerevisiae's natural fermentation product ethanol from glycerol caused by the conducted genetic modifications. This understanding is supposed to facilitate future engineering of this yeast for fermenting glycerol into valuable products more reduced than ethanol.

RESULTS

A strain solely exhibiting the glycerol catabolic pathway replacement produced ethanol at concentrations close to the detection limit. The expression of the heterologous aquaglyceroporin caused significant ethanol production (8.5 g L^-1 from 51.5 g L^-1 glycerol consumed) in a strain catabolizing glycerol via the DHA pathway but not in the wild-type background. A reduction of oxygen availability in the shake flask cultures further increased the ethanol titer up to 15.7 g L^-1 (from 45 g L^-1 glycerol consumed).

CONCLUSION

The increased yield of cytosolic NADH caused by the glycerol catabolic pathway replacement seems to be a minimal requirement for the occurrence of alcoholic fermentation in S. cerevisiae growing in synthetic glycerol medium. The remarkable metabolic switch to ethanol formation in the DHA pathway strain with the heterologous aquaglyceroporin supports the assumption of a much stronger influx of glycerol accompanied by an increased rate of cytosolic NADH production via the DHA pathway. The fact that a reduction of oxygen supply increases ethanol production in DHA pathway strains is in line with the hypothesis that a major part of glycerol in normal shake flask cultures still enters the catabolism in a respiratory manner.

Chromatin remodeling complexes are involvesd in the regulation of ethanol production during static fermentation in budding yeast

The budding yeast Saccharomyces cerevisiae remains a central position among biofuel-producing organisms. However, the gene expression regulatory networks behind the ethanol fermentation is still not fully understood. Using a static fermentation model, we have examined the ethanol yields on biomass of deletion mutants for all yeast nonessential genes encoding transcription factors and their related proteins in the yeast genome. A total of 20 (about 10%) transcription factors are identified to be regulators of ethanol production during fermentation. These transcription factors are mainly involved in cell cycling, chromatin remodeling, transcription, stress response, protein synthesis and lipid synthesis. Our data provides a basis for further understanding mechanisms regulating ethanol production in budding yeast.

Free fatty acids promote transformation efficiency of yeast

High transformation efficiency is essential in genetic engineering for functional metabolic analysis and cell factory construction, in particular in construction of long biosynthetic pathways with multiple genes. Here, we found that free fatty acid (FFA)-overproducing strain showed higher transformation efficiency in Saccharomyces cerevisiae. We then verified that external supplementation of FFAs, to the culture media for competent cell preparation, improved yeast transformation efficiency significantly. Among all tested FFAs, 0.5 g/L C16:0 FFA worked best on promoting transformation of S. cerevisiae and Komagataella phaffii (previously named as Pichia pastoris). Furthermore, C16:0 FFA improved the assembly efficiency of multiple DNA fragments into large plasmids and genome by 100%, which will facilitate the construction and optimization of multigene-containing long pathways.

Deletion of JEN1 and ADY2 reduces lactic acid yield from an engineered Saccharomyces cerevisiae, in xylose medium, expressing a heterologous lactate dehydrogenase

Microorganisms have evolved to produce specific end products for many reasons, including maintaining redox balance between NAD+ and NADH. The yeast Saccharomyces cerevisiae, for example, produces ethanol as a primary end product from glucose for the regeneration of NAD+. Engineered S. cerevisiae strains have been developed to ferment lignocellulosic sugars, such as xylose, to produce lactic acid by expression of a heterologous lactate dehydrogenase (ldhA from Rhizopus oryzae) without genetic perturbation to the native ethanol pathway. Surprisingly, the engineered yeast strains predominantly produce ethanol from glucose, but produce lactic acid as the major product from xylose. Here, we provide initial evidence that the shift in product formation from ethanol to lactic acid during xylose fermentation is at least partially dependent on the presence of functioning monocarboxylate transporter genes/proteins, including JEN1 and ADY2, which are downregulated and unstable in the presence of glucose, but upregulated/stable on xylose. Future yeast metabolic engineering studies may find the feedstock/carbon selection, such as xylose, an important step toward improving the yield of target end products.

Reconstruction of metabolic pathway for isobutanol production in Escherichia coli

Background

The microbial production of useful fuels and chemicals has been widely studied. In several cases, glucose is used as the raw material, and almost all microbes adopt the Embden–Meyerhof (EM) pathway to degrade glucose into compounds of interest. Recently, the Entner–Doudoroff (ED) pathway has been gaining attention as an alternative strategy for microbial production.

Results

In the present study, we attempted to apply the ED pathway for isobutanol production in Escherichia coli because of the complete redox balance involved. First, we generated ED pathway-dependent isobutanol-producing E. coli. Thereafter, the inactivation of the genes concerning organic acids as the byproducts was performed to improve the carbon flux to isobutanol from glucose. Finally, the expression of the genes concerning the ED pathway was modified.

Conclusions

The optimized isobutanol-producing E. coli produced 15.0 g/L of isobutanol as the final titer, and the yield from glucose was 0.37 g/g (g-glucose/g-isobutanol).

Electronic supplementary material

The online version of this article (10.1186/s12934-019-1171-4) contains supplementary material, which is available to authorized users.

Reassessment of requirements for anaerobic xylose fermentation by engineered, non-evolved Saccharomyces cerevisiae strains

Expression of a heterologous xylose isomerase, deletion of the GRE3 aldose-reductase gene and overexpression of genes encoding xylulokinase (XKS1) and non-oxidative pentose-phosphate-pathway enzymes (RKI1, RPE1, TAL1, TKL1) enables aerobic growth of Saccharomyces cerevisiae on d-xylose. However, literature reports differ on whether anaerobic growth on d-xylose requires additional mutations. Here, CRISPR-Cas9-assisted reconstruction and physiological analysis confirmed an early report that this basic set of genetic modifications suffices to enable anaerobic growth on d-xylose in the CEN.PK genetic background. Strains that additionally carried overexpression cassettes for the transaldolase and transketolase paralogs NQM1 and TKL2 only exhibited anaerobic growth on d-xylose after a 7–10 day lag phase. This extended lag phase was eliminated by increasing inoculum concentrations from 0.02 to 0.2 g biomass L⁻¹. Alternatively, a long lag phase could be prevented by sparging low-inoculum-density bioreactor cultures with a CO₂/N₂-mixture, thus mimicking initial CO₂ concentrations in high-inoculum-density, nitrogen-sparged cultures, or by using l-aspartate instead of ammonium as nitrogen source. This study resolves apparent contradictions in the literature on the genetic interventions required for anaerobic growth of CEN.PK-derived strains on d-xylose. Additionally, it indicates the potential relevance of CO₂ availability and anaplerotic carboxylation reactions for anaerobic growth of engineered S. cerevisiae strains on d-xylose.

QTL analysis reveals genomic variants linked to high-temperature fermentation performance in the industrial yeast

BACKGROUND

High-temperature fermentation is desirable for the industrial production of ethanol, which requires thermotolerant yeast strains. However, yeast thermotolerance is a complicated quantitative trait. The understanding of genetic basis behind high-temperature fermentation performance is still limited. Quantitative trait locus (QTL) mapping by pooled-segregant whole genome sequencing has been proved to be a powerful and reliable approach to identify the loci, genes and single nucleotide polymorphism (SNP) variants linked to quantitative traits of yeast.

RESULTS

One superior thermotolerant industrial strain and one inferior thermosensitive natural strain with distinct high-temperature fermentation performances were screened from 124 Saccharomyces cerevisiae strains as parent strains for crossing and segregant isolation. Based on QTL mapping by pooled-segregant whole genome sequencing as well as the subsequent reciprocal hemizygosity analysis (RHA) and allele replacement analysis, we identified and validated total eight causative genes in four QTLs that linked to high-temperature fermentation of yeast. Interestingly, loss of heterozygosity in five of the eight causative genes including RXT2, ECM24, CSC1, IRA2 and AVO1 exhibited positive effects on high-temperature fermentation. Principal component analysis (PCA) of high-temperature fermentation data from all the RHA and allele replacement strains of those eight genes distinguished three superior parent alleles including VPS34, VID24 and DAP1 to be greatly beneficial to high-temperature fermentation in contrast to their inferior parent alleles. Strikingly, physiological impacts of the superior parent alleles of VPS34, VID24 and DAP1 converged on cell membrane by increasing trehalose accumulation or reducing membrane fluidity.

CONCLUSIONS

This work revealed eight novel causative genes and SNP variants closely associated with high-temperature fermentation performance. Among these genes, VPS34 and DAP1 would be good targets for improving high-temperature fermentation of the industrial yeast. It also showed that loss of heterozygosity of causative genes could contribute to the improvement of high-temperature fermentation capacities. Our findings would provide guides to develop more robust and thermotolerant strains for the industrial production of ethanol.

Understanding the stress responses of Kluyveromyces marxianus after an arrest during high-temperature ethanol fermentation based on integration of RNA-Seq and metabolite data

The thermotolerant Kluyveromyces marxianus is a potential candidate for high-temperature ethanol fermentation. Although K. marxianus exhibited high ethanol productivity at 45 °C during the early fermentation stage, we observed a fermentation arrest due to the accumulated inhibitors. The stress responses of K. marxianus during high-temperature fermentation were revealed based on integration of RNA sequencing (RNA-Seq) and metabolite data. High temperature stimulated mitochondrial respiration but repressed the tricarboxylic acid (TCA) cycle, leading to increased generation of reactive oxygen species (ROS) and a lowered ratio of reduced nicotinamide adenine dinucleotide (NADH)/oxidized nicotinamide adenine dinucleotide (NAD⁺). Glycerol production was enhanced during the early fermentation stage, which might contribute to NADH reoxidation and ROS generation. Excess ROS could be neutralized by reduced nicotinamide adenine dinucleotide phosphate (NADPH) that might be reserved in the following ways: (1) decreased biosynthesis of branched-chain amino acids (BCAAs) reduced NADPH consumption; (2) enhanced acetic acid production increased NADPH regeneration. The degree of fatty acid unsaturation was also reduced to adapt to high temperature. In addition, stress responses were also observed after the fermentation arrest at 45 °C. Genes related to peroxidase activity, iron-sulfur cluster assembly, and flavin mononucleotide (FMN) binding were downregulated, while genes associated with DNA repair and lipid composition of the plasma were upregulated. The yeast also produced more ergosterol to deal with ethanol stress. This study gains comprehensive insights into the K. marxianus transcriptome under various stresses during high-temperature ethanol fermentation, providing rich information for further metabolic engineering towards improved stress tolerance and ethanol production.

The art of vector engineering: towards the construction of next-generation genetic tools

When recombinant DNA technology was developed more than 40 years ago, no one could have imagined the impact it would have on both society and the scientific community. In the field of genetic engineering, the most important tool developed was the plasmid vector. This technology has been continuously expanding and undergoing adaptations. Here, we provide a detailed view following the evolution of vectors built throughout the years destined to study microorganisms and their peculiarities, including those whose genomes can only be revealed through metagenomics. We remark how synthetic biology became a turning point in designing these genetic tools to create meaningful innovations. We have placed special focus on the tools for engineering bacteria and fungi (both yeast and filamentous fungi) and those available to construct metagenomic libraries. Based on this overview, future goals would include the development of modular vectors bearing standardized parts and orthogonally designed circuits, a task not fully addressed thus far. Finally, we present some challenges that should be overcome to enable the next generation of vector design and ways to address it.

Systematic Analysis of Bottlenecks in a Multibranched and Multilevel Regulated Pathway: The Molecular Fundamentals of l-Methionine Biosynthesis in Escherichia coli

To produce chemicals and fuels from renewable resources, various strategies and genetic tools have been developed to redesign pathways and optimize the metabolic flux in microorganisms. However, in most successful cases, the target chemicals are synthesized through a linear pathway, and regular methodologies for the identification of bottlenecks and metabolic flux optimization in multibranched and multilevel regulated pathways, such as the l-methionine biosynthetic pathway, have rarely been reported. In the present study, a systematic analysis strategy was employed to gradually reveal and remove the potential bottlenecks limiting the l-methionine biosynthesis in E. coli. 80 genes in central metabolism and selected amino acids biosynthetic pathways were first repressed or upregulated to probe their effects on l-methionine accumulation. The l-methionine biosynthetic pathway was then modularized and iteratively genetic modifications were performed to uncover the multiple layers of limitations and stepwise improve the l-methionine titer. The metabolomics data further revealed a more evenly distributed metabolic flux in l-methionine biosynthesis pathway of the optimal strain and provided valuable suggestions for further optimization. The optimal strain produced 16.86 g/L of l-methionine in 48 h by fed-batch fermentation. This work is the first to our knowledge to systematically elucidate the molecular fundamentals of multilevel regulation of l-methionine biosynthesis. It also demonstrated that the systematic analysis strategy can boost our ability to identify the potential bottlenecks and optimize the metabolic flux in multibranched and multilevel regulated pathways for the production of corresponding chemicals.

Modulation of gene expression by cocktail δ-integration to improve carotenoid production in Saccharomyces cerevisiae

Carotenoids, including β-carotene, are commercially valuable compounds, and their production by engineered Saccharomyces cerevisiae is a promising strategy for their industrial production. Here, to improve β-carotene productivity in engineered S. cerevisiae, a cocktail δ-integration strategy, which involves simultaneous integration of various multi-copy genes, followed by selection of desirable transformants, was applied for modulation of β-carotene production-related genes expression. The engineered strain, YPH499/Mo3Crt79, was constructed by three repeated rounds of cocktail δ-integration using CrtE, CrtYB, and CrtI derived from the yeast, Xanthophyllomyces dendrorhous. The recombinant strain produced 7.3 mg/L of carotenoids in 48 h and 52.3 mg/L of β-carotene in 96 h, which were greater values than those achieved by CrtE, CrtYB, and CrtI co-overexpressing strains. Therefore, repeated cocktail δ-integration was effective in improving carotenoid productivity in S. cerevisiae and could be a promising technique for constructing metabolically engineered S. cerevisiae capable of producing bio-based chemicals.

Oleaginicity of the yeast strain Saccharomyces cerevisiae D5A

BACKGROUND

The model yeast, Saccharomyces cerevisiae, is not known to be oleaginous. However, an industrial wild-type strain, D5A, was shown to accumulate over 20% storage lipids from glucose when growth is nitrogen-limited compared to no more than 7% lipid accumulation without nitrogen stress.

METHODS AND RESULTS

To elucidate the mechanisms of S. cerevisiae D5A oleaginicity, we compared physiological and metabolic changes; as well as the transcriptional profiles of the oleaginous industrial strain, D5A, and a non-oleaginous laboratory strain, BY4741, under normal and nitrogen-limited conditions using analytic techniques and next-generation sequencing-based RNA-Seq transcriptomics. Transcriptional levels for genes associated with fatty acid biosynthesis, nitrogen metabolism, amino acid catabolism, as well as the pentose phosphate pathway and ethanol oxidation in central carbon (C) metabolism, were up-regulated in D5A during nitrogen deprivation. Despite increased carbon flux to lipids, most gene-encoding enzymes involved in triacylglycerol (TAG) assembly were expressed at similar levels regardless of the varying nitrogen concentrations in the growth media and strain backgrounds. Phospholipid turnover also contributed to TAG accumulation through increased precursor production with the down-regulation of subsequent phospholipid synthesis steps. Our results also demonstrated that nitrogen assimilation via the glutamate-glutamine pathway and amino acid metabolism, as well as the fluxes of carbon and reductants from central C metabolism, are integral to the general oleaginicity of D5A, which resulted in the enhanced lipid storage during nitrogen deprivation.

CONCLUSION

This work demonstrated the disequilibrium and rebalance of carbon and nitrogen contribution to the accumulation of lipids in the oleaginous yeast S. cerevisiae D5A. Rather than TAG assembly from acyl groups, the major switches for the enhanced lipid accumulation of D5A (i.e., fatty acid biosynthesis) are the increases of cytosolic pools of acetyl-CoA and NADPH, as well as alternative nitrogen assimilation.

A GFP-fusion coupling FACS platform for advancing the metabolic engineering of filamentous fungi

BACKGROUND

The filamentous fungus Trichoderma reesei, the most widely used cellulase producer, also has promising applications in lignocellulose-based biorefinery: consolidated bioprocessing for the production of high value-added products. However, such applications are thwarted by the time-consuming metabolic engineering processes (design-build-test-learn cycle) for T. reesei, resulted from (i) the spore separation-mediated purification as the multinucleate hyphae, (ii) transformant screening for high expression levels since unavailable of episomal expression system, and (iii) cases of inexpressible heterologous proteins.

RESULTS

In this study, a GFP-fusion coupled fluorescence-activated cell sorting (FACS) platform was established to speed up the build and test process of the DBTL cycle, by enabling rapid selection for expressible heterologous genes and bypassing both laborious spore separation and transformant screening. Here, the feasibility of flow cytometry in analyzing and sorting T. reesei cells harboring GFP-fused expressible protein was proven, as well as the application of the platform for constitutive promoter strength evaluation. As a proof-of-concept, the platform was employed to construct the first T. reesei strain producing fatty alcohol, resulting in up to 2 mg hexadecanol being produced per gram biomass. Pathway construction was enabled through rapid selection of functional fatty acyl-CoA reductase encoding gene Tafar1 from three candidate genes and strains with high expression level from spore pools. As a result of using this method, the total costed time for the build and test cycle using T. reesei, subsequently, reduced by approx. 75% from 2 months to 2 weeks.

CONCLUSION

This study established the GFP-fusion coupling FACS platform and the first filamentous fungal fatty alcohol-producing cell factory, and demonstrated versatile applications of the platform in the metabolic engineering of filamentous fungi, which can be harnessed to potentially advance the application of filamentous fungi in lignocellulose-based biorefinery.

Modular Pathway Rewiring of Yeast for Amino Acid Production

Amino acids find various applications in biotechnology in view of their importance in the food, feed, pharmaceutical, and personal care industries as nutrients, additives, and drugs, respectively. For the large-scale production of amino acids, microbial cell factories are widely used and the development of amino acid-producing strains has mainly focused on prokaryotes Corynebacterium glutamicum and Escherichia coli. However, the eukaryote Saccharomyces cerevisiae is becoming an even more appealing microbial host for production of amino acids and derivatives because of its superior molecular and physiological features, such as amenable to genetic engineering and high tolerance to harsh conditions. To transform S. cerevisiae into an industrial amino acid production platform, the highly coordinated and multiple layers regulation in its amino acid metabolism should be relieved and reconstituted to optimize the metabolic flux toward synthesis of target products. This chapter describes principles, strategies, and applications of modular pathway rewiring in yeast using the engineering of l-ornithine metabolism as a paradigm. Additionally, detailed protocols for in vitro module construction and CRISPR/Cas-mediated pathway assembly are provided.

Engineering TATA-binding protein Spt15 to improve ethanol tolerance and production in Kluyveromyces marxianus

BACKGROUND

Low ethanol tolerance of Kluyveromyces marxianus limits its application in high-temperature ethanol fermentation. As a complex phenotype, ethanol tolerance involves synergistic actions of many genes that are widely distributed throughout the genome, thereby being difficult to engineer. TATA-binding protein is the most common target of global transcription machinery engineering for improvement of complex phenotypes.

RESULTS

A random mutagenesis library of K. marxianus TATA-binding protein Spt15 was constructed and subjected to screening under ethanol stress. Two mutant strains with improved ethanol tolerance were identified, one of which (denoted as M2) exhibited increased ethanol productivity. The mutant of Spt15 in strain M2 (denoted as Spt15-M2) has a single amino acid substitution at position 31 (Lys → Glu). RNA-Seq-based transcriptomic analysis revealed cellular transcription profile changes resulting from Spt15-M2. Spt15-M2 caused changes in transcriptional level of most of the genes in the central carbon metabolism network. Compared with control strain, 444 differentially expressed genes (DEGs) were identified in strain M2 (fold change > 2, Padj < 0.05), including 48 up-regulated and 396 down-regulated. The up-regulated DEGs are involved in amino acid transport, long-chain fatty acid biosynthesis and MAPK signaling pathway, while the down-regulated DEGs are related to ribosome biogenesis, translation and protein synthesis. Five candidate genes (GAP1, GNP1, FAR1, STE2 and TEC1), which were found to be up-regulated in M2 strain, were overexpressed for a gain-of-function assay. However, the overexpression of no single gene helped improve ethanol tolerance as SPT15-M2 did.

CONCLUSIONS

This work demonstrates that ethanol tolerance of K. marxianus can be improved by engineering its TATA-binding protein. A single amino acid substitution (K31E) of TATA-binding protein Spt15 is able to bring differential expression of hundreds of genes that acted as an interconnected network for the phenotype of ethanol tolerance. Future perspectives of this technique in K. marxianus were discussed.

Systematic Engineering for Improved Carbon Economy in the Biosynthesis of Polyhydroxyalkanoates and Isoprenoids

With the rapid development of synthetic biology and metabolic engineering, a broad range of biochemicals can be biosynthesized, which include polyhydroxyalkanoates and isoprenoids. However, some of the bio-approaches in chemical synthesis have just started to be applied outside of laboratory settings, and many require considerable efforts to achieve economies of scale. One of the often-seen barriers is the low yield and productivity, which leads to higher unit cost and unit capital investment for the bioconversion process. In general, higher carbon economy (less carbon wastes during conversion process from biomass to objective bio-based chemicals) will result in higher bioconversion yield, which results in less waste being generated during the process. To achieve this goal, diversified strategies have been applied; matured strategies include pathway engineering to block competitive pathways, enzyme engineering to enhance the activities of enzymes, and process optimization to improve biomass/carbon yield. In this review, we analyze the impact of carbon sources from different types of biomass on the yield of bio-based chemicals (especially for polyhydroxyalkanoates and isoprenoids). Moreover, we summarize the traditional strategies for improving carbon economy during the bioconversion process and introduce the updated techniques in building up non-natural carbon pathways, which demonstrate higher carbon economies than their natural counterparts.

Value-added biotransformation of cellulosic sugars by engineered Saccharomyces cerevisiae

The substantial research efforts into lignocellulosic biofuels have generated an abundance of valuable knowledge and technologies for metabolic engineering. In particular, these investments have led to a vast growth in proficiency of engineering the yeast Saccharomyces cerevisiae for consuming lignocellulosic sugars, enabling the simultaneous assimilation of multiple carbon sources, and producing a large variety of value-added products by introduction of heterologous metabolic pathways. While microbial conversion of cellulosic sugars into large-volume low-value biofuels is not currently economically feasible, there may still be opportunities to produce other value-added chemicals as regulation of cellulosic sugar metabolism is quite different from glucose metabolism. This review summarizes these recent advances with an emphasis on employing engineered yeast for the bioconversion of lignocellulosic sugars into a variety of non-ethanol value-added products.

Genome editing in Kluyveromyces and Ogataea yeasts using a broad-host-range Cas9/gRNA co-expression plasmid

While CRISPR-Cas9-mediated genome editing has transformed yeast research, current plasmids and cassettes for Cas9 and guide-RNA expression are species specific. CRISPR tools that function in multiple yeast species could contribute to the intensifying research on non-conventional yeasts. A plasmid carrying a pangenomic origin of replication and two constitutive expression cassettes for Cas9 and ribozyme-flanked gRNAs was constructed. Its functionality was tested by analyzing inactivation of the ADE2 gene in four yeast species. In two Kluyveromyces species, near-perfect targeting (≥96%) and homologous repair (HR) were observed in at least 24% of transformants. In two Ogataea species, Ade- mutants were not observed directly after transformation, but prolonged incubation of transformed cells resulted in targeting efficiencies of 9% to 63% mediated by non-homologous end joining (NHEJ). In an Ogataea parapolymorpha ku80 mutant, deletion of OpADE2 mediated by HR was achieved, albeit at low efficiencies (<1%). Furthermore the expression of a dual polycistronic gRNA array enabled simultaneous interruption of OpADE2 and OpYNR1 demonstrating flexibility of ribozyme-flanked gRNA design for multiplexing. While prevalence of NHEJ prevented HR-mediated editing in Ogataea, such targeted editing was possible in Kluyveromyces. This broad-host-range CRISPR/gRNA system may contribute to exploration of Cas9-mediated genome editing in other Saccharomycotina yeasts.

Incorporating comparative genomics into the design-test-learn cycle of microbial strain engineering

Engineering microbes with new properties is an important goal in industrial engineering, to establish biological factories for production of biofuels, commodity chemicals and pharmaceutics. But engineering microbes to produce new compounds with high yield remains a major challenge toward economically viable production. Incorporating several modern approaches, including synthetic and systems biology, metabolic modeling and regulatory rewiring, has proven to significantly advance industrial strain engineering. This review highlights how comparative genomics can also facilitate strain engineering, by identifying novel genes and pathways, regulatory mechanisms and genetic background effects for engineering. We discuss how incorporating comparative genomics into the design-test-learn cycle of strain engineering can provide novel information that complements other engineering strategies.

Distinct Proteome Remodeling of Industrial Saccharomyces cerevisiae in Response to Prolonged Thermal Stress or Transient Heat Shock

To gain a deep understanding of yeast-cell response to heat stress, multiple laboratory strains have been intensively studied via genome-wide expression analysis for the mechanistic dissection of classical heat-shock response (HSR). However, robust industrial strains of Saccharomyces cerevisiae have hardly been explored in global analysis for elucidation of the mechanism of thermotolerant response (TR) during fermentation. Herein, we employed data-independent acquisition and sequential window acquisition of all theoretical mass spectra based proteomic workflows to characterize proteome remodeling of an industrial strain, ScY01, responding to prolonged thermal stress or transient heat shock. By comparing the proteomic signatures of ScY01 in TR versus HSR as well as the HSR of the industrial strain versus a laboratory strain, our study revealed disparate response mechanisms of ScY01 during thermotolerant growth or under heat shock. In addition, through proteomics data-mining for decoding transcription factor interaction networks followed by validation experiments, we uncovered the functions of two novel transcription factors, Mig1 and Srb2, in enhancing the thermotolerance of the industrial strain. This study has demonstrated that accurate and high-throughput quantitative proteomics not only provides new insights into the molecular basis for complex microbial phenotypes but also pinpoints upstream regulators that can be targeted for improving the desired traits of industrial microorganisms.