Organization of interphase microtubules in fission yeast analyzed by electron tomography

Fission yeast MOZART1/Mzt1 is an essential γ-tubulin complex component required for complex recruitment to the microtubule organizing center, but not its assembly

γ-Tubulin plays a universal role in microtubule nucleation from microtubule organizing centers (MTOCs) such as the animal centrosome and fungal spindle pole body (SPB). γ-Tubulin functions as a multiprotein complex called the γ-tubulin complex (γ-TuC), consisting of GCP1-6 (GCP1 is γ-tubulin). In fungi and flies, it has been shown that GCP1-3 are core components, as they are indispensable for γ-TuC complex assembly and cell division, whereas the other three GCPs are not. Recently a novel conserved component, MOZART1, was identified in humans and plants, but its precise functions remain to be determined. In this paper, we characterize the fission yeast homologue Mzt1, showing that it is essential for cell viability. Mzt1 is present in approximately equal stoichiometry with Alp4/GCP2 and localizes to all the MTOCs, including the SPB and interphase and equatorial MTOCs. Temperature-sensitive mzt1 mutants display varying degrees of compromised microtubule organization, exhibiting multiple defects during both interphase and mitosis. Mzt1 is required for γ-TuC recruitment, but not sufficient to localize to the SPB, which depends on γ-TuC integrity. Intriguingly, the core γ-TuC assembles in the absence of Mzt1. Mzt1 therefore plays a unique role within the γ-TuC components in attachment of this complex to the major MTOC site.

Organization of organelles within hyphae of Ashbya gossypii revealed by electron tomography

Ashbya gossypii grows as multinucleated and constantly elongating hyphae. Nuclei are in continuous forward and backward motion, also move during mitosis, and frequently bypass each other. Whereas these nuclear movements are well documented, comparatively little is known about the density and morphology of organelles which very likely influence these movements. To understand the three-dimensional subcellular organization of hyphae at high resolution, we performed large-scale electron tomography of the tip regions in A. gossypii. Here, we present a comprehensive space-filling model in which most membrane-limited organelles including nuclei, mitochondria, endosomes, multivesicular bodies, vacuoles, autophagosomes, peroxisomes, and vesicles are modeled. Nuclei revealed different morphologies and protrusions filled by the nucleolus. Mitochondria are very abundant and form a tubular network with a polarized spherical fraction. The organelles of the degradative pathways show a clustered organization. By analyzing vesicle-like bodies, we identified three size classes of electron-dense vesicles (∼200, ∼150, and ∼100 nm) homogeneously distributed in the cytoplasm which most likely represent peroxisomes. Finally, coated and uncoated vesicles with approximately 40-nm diameters show a polarized distribution toward the hyphal tip with the coated vesicles preferentially localizing at the hyphal periphery.

Electron tomography reveals novel microtubule lattice and microtubule organizing centre defects in +TIP mutants

Mal3p and Tip1p are the fission yeast (Schizosaccharomyces pombe) homologues of EB1 and CLIP-170, two conserved microtubule plus end tracking proteins (+TIPs). These proteins are crucial regulators of microtubule dynamics. Using electron tomography, we carried out a high-resolution analysis of the phenotypes caused by mal3 and tip1 deletions. We describe the 3-dimensional microtubule organization, quantify microtubule end structures and uncover novel defects of the microtubule lattices. We also reveal unexpected structural modifications of the spindle pole bodies (SPBs), the yeast microtubule organizing centers. In both mutants we observe an increased SPB volume and a reduced number of MT/SPB attachments. The discovered defects alter previous interpretations of the mutant phenotypes and provide new insights into the molecular functions of the two protein families.

Studying kinetochore-fiber ultrastructure using correlative light-electron microscopy

Electron microscopy (EM) has dominated high-resolution cellular imaging for over 50 years, thanks to its ability to resolve on nanometer-scale intracellular structures such as the microtubules of the mitotic spindle. It is advantageous to view the cell of interest prior to processing the sample for EM. Correlative light-electron microscopy (CLEM) is a technique that allows one to visualize cells of interest by light microscopy (LM) before being transferred to EM for ultrastructural examination. Here, we describe how CLEM can be applied as an effective tool to study the spindle apparatus of mitotic cells. This approach allows transfected cells of interest, in desirable stages of mitosis, to be followed from LM to EM. CLEM has often been considered as a technically challenging and laborious technique. In this chapter, we provide step-by-step pictorial guides that allow successful CLEM to be achieved. In addition, we explain how it is possible to vary the sectioning plane, allowing spindles and microtubules to be analyzed from different angles, and the outputs that can be obtained from these methods when applied to the study of kinetochore fiber ultrastructure.

FIB/SEM tomography with TEM-like resolution for 3D imaging of high-pressure frozen cells

Focused ion beam/scanning electron microscopy (FIB/SEM) tomography is a novel powerful approach for three-dimensional (3D) imaging of biological samples. Thereby, a sample is repeatedly milled with the focused ion beam (FIB) and each newly produced block face is imaged with the scanning electron microscope (SEM). This process can be repeated ad libitum in arbitrarily small increments allowing 3D analysis of relatively large volumes such as eukaryotic cells. High-pressure freezing and freeze substitution, on the other hand, are the gold standards for electron microscopic preparation of whole cells. In this work, we combined these methods and substantially improved resolution by using the secondary electron signal for image formation. With this imaging mode, contrast is formed in a very small, well-defined area close to the newly produced surface. By using this approach, small features, so far only visible in transmission electron microscope (TEM) (e.g., the two leaflets of the membrane bi-layer, clathrin coats and cytoskeletal elements), can be resolved directly in the FIB/SEM in the 3D context of whole cells.

Fission yeast Alp14 is a dose-dependent plus end-tracking microtubule polymerase

Alp14, a XMAP215 orthologue in fission yeast, is a microtubule (MT) polymerase. It tracks growing MT plus ends and regulates the polymerization state of tubulin by cycling between a tubulin dimer–bound cytoplasmic state and a MT polymerase state that promotes rapid MT assembly.

XMAP215/Dis1 proteins are conserved tubulin-binding TOG-domain proteins that regulate microtubule (MT) plus-end dynamics. Here we show that Alp14, a XMAP215 orthologue in fission yeast, Schizosaccharomyces pombe, has properties of a MT polymerase. In vivo, Alp14 localizes to growing MT plus ends in a manner independent of Mal3 (EB1). alp14-null mutants display short interphase MTs with twofold slower assembly rate and frequent pauses. Alp14 is a homodimer that binds a single tubulin dimer. In vitro, purified Alp14 molecules track growing MT plus ends and accelerate MT assembly threefold. TOG-domain mutants demonstrate that tubulin binding is critical for function and plus end localization. Overexpression of Alp14 or only its TOG domains causes complete MT loss in vivo, and high Alp14 concentration inhibits MT assembly in vitro. These inhibitory effects may arise from Alp14 sequestration of tubulin and effects on the MT. Our studies suggest that Alp14 regulates the polymerization state of tubulin by cycling between a tubulin dimer–bound cytoplasmic state and a MT polymerase state that promotes rapid MT assembly.

Intermembrane docking reactions are regulated by membrane curvature

The polymorphism of eukaryotic cellular membranes is a tightly regulated and well-conserved phenotype. Recent data have revealed important regulatory roles of membrane curvature on the spatio-temporal localization of proteins and in membrane fusion. Here we quantified the influence of membrane curvature on the efficiency of intermembrane docking reactions. Using fluorescence microscopy, we monitored the docking of single vesicle-vesicle pairs of different diameter (30-200 nm) and therefore curvature, as mediated by neuronal soluble N-ethylmaleimide-sensitive factor attachment protein receptors (SNAREs) and streptavidin-biotin. Surprisingly, the intermembrane docking efficiency exhibited an ∼30-60 fold enhancement as a function of curvature. In comparison, synaptotagmin and calcium accelerate SNARE-mediated fusion in vitro by a factor of 2-10. To explain this finding, we formulated a biophysical model. On the basis of our findings, we propose that membrane curvature can regulate intermembrane tethering reactions and consequently any downstream process, including the fusion of vesicles and possibly viruses with their target membranes.

Microtubule organization: a pericentriolar material-like structure in yeast meiosis

During meiotic prophase in fission yeast, the nucleus undergoes dramatic oscillatory movements. A newly identified structure, the radial microtubule organizing center (rMTOC), mediates these movements and shares some of the features of the pericentriolar material in higher eukaryotes.

Transient structure associated with the spindle pole body directs meiotic microtubule reorganization in S. pombe

Background

Vigorous chromosome movements driven by cytoskeletal assemblies are a widely conserved feature of sexual differentiation to facilitate meiotic recombination. In fission yeast, this process involves the dramatic conversion of arrays of cytoplasmic microtubules (MTs), generated from multiple MT organizing centers (MTOCs), into a single radial MT (rMT) array associated with the spindle pole body (SPB), the major MTOC during meiotic prophase. The rMT is then dissolved upon the onset of meiosis I when a bipolar spindle emerges to conduct chromosome segregation. Structural features and molecular mechanisms that govern these dynamic MT rearrangements are poorly understood.

Results

Electron tomography of the SPBs showed that the rMT emanates from a newly recognized amorphous structure, which we term the rMTOC. The rMTOC, which resides at the cytoplasmic side of the SPB, is highly enriched in γ-tubulin reminiscent of the pericentriolar material of higher eukaryotic centrosomes. Formation of the rMTOC depends on Hrs1/Mcp6, a meiosis-specific SPB component that is located at the rMTOC. At the onset of meiosis I, Hrs1/Mcp6 is subject to strict downregulation by both proteasome-dependent degradation and phosphorylation leading to complete inactivation of the rMTOC. This ensures rMT dissolution and bipolar spindle formation.

Conclusions

Our study reveals the molecular basis for the transient generation of a novel MTOC, which triggers a program of MT rearrangement that is required for meiotic differentiation.

S. pombe kinesins-8 promote both nucleation and catastrophe of microtubules

The kinesins-8 were originally thought to be microtubule depolymerases, but are now emerging as more versatile catalysts of microtubule dynamics. We show here that S. pombe Klp5-436 and Klp6-440 are non-processive plus-end-directed motors whose in vitro velocities on S. pombe microtubules at 7 and 23 nm s(-1) are too slow to keep pace with the growing tips of dynamic interphase microtubules in living S. pombe. In vitro, Klp5 and 6 dimers exhibit a hitherto-undescribed combination of strong enhancement of microtubule nucleation with no effect on growth rate or catastrophe frequency. By contrast in vivo, both Klp5 and Klp6 promote microtubule catastrophe at cell ends whilst Klp6 also increases the number of interphase microtubule arrays (IMAs). Our data support a model in which Klp5/6 bind tightly to free tubulin heterodimers, strongly promoting the nucleation of new microtubules, and then continue to land as a tubulin-motor complex on the tips of growing microtubules, with the motors then dissociating after a few seconds residence on the lattice. In vivo, we predict that only at cell ends, when growing microtubule tips become lodged and their growth slows down, will Klp5/6 motor activity succeed in tracking growing microtubule tips. This mechanism would allow Klp5/6 to detect the arrival of microtubule tips at cells ends and to amplify the intrinsic tendency for microtubules to catastrophise in compression at cell ends. Our evidence identifies Klp5 and 6 as spatial regulators of microtubule dynamics that enhance both microtubule nucleation at the cell centre and microtubule catastrophe at the cell ends.

mmb1p binds mitochondria to dynamic microtubules

BACKGROUND

Mitochondria form a dynamic tubular network within the cell. Proper mitochondria movement and distribution are critical for their localized function in cell metabolism, growth, and survival. In mammalian cells, mechanisms of mitochondria positioning appear dependent on the microtubule cytoskeleton, with kinesin or dynein motors carrying mitochondria as cargos and distributing them throughout the microtubule network. Interestingly, the timescale of microtubule dynamics occurs in seconds, and the timescale of mitochondria distribution occurs in minutes. How does the cell couple these two time constants?

RESULTS

Fission yeast also relies on microtubules for mitochondria distribution. We report here a new microtubule-dependent but motor-independent mechanism for proper mitochondria positioning in fission yeast. We identify the protein mmb1p, which binds to mitochondria and microtubules. mmb1p attaches the tubular mitochondria to the microtubule lattice at multiple discrete interaction sites. mmb1 deletion causes mitochondria to aggregate, with the long-term consequence of defective mitochondria distribution and cell death. mmb1p decreases microtubule dynamicity.

CONCLUSIONS

mmb1p is a new microtubule-mitochondria binding protein. We propose that mmb1p acts to couple long-term mitochondria distribution to short-term microtubule dynamics by attenuating microtubule dynamics, thus enhancing the mitochondria-microtubule interaction time.

Precise, correlated fluorescence microscopy and electron tomography of lowicryl sections using fluorescent fiducial markers

The application of fluorescence and electron microscopy to the same specimen allows the study of dynamic and rare cellular events at ultrastructural detail. Here, we present a correlative microscopy approach, which combines high accuracy of correlation, high sensitivity for detecting faint fluorescent signals, as well as robustness and reproducibility to permit large dataset collections. We provide a step-by-step protocol that allows direct mapping of fluorescent protein signals into electron tomograms. A localization precision of <100 nm is achieved by using fluorescent fiducial markers which are visible both in fluorescence images and in electron tomograms. We explain the critical details of the procedure, give background information on the individual steps, present results from test experiments carried out during establishment of the method, as well as information about possible modifications to the protocol, such as its application to 2D electron micrographs. This simple, robust, and flexible method can be applied to a large variety of cellular systems, such as yeast cell pellets and mammalian cell monolayers, to answer a broad spectrum of structure-function related questions.

Electron tomography of the microtubule cytoskeleton in multinucleated hyphae of Ashbya gossypii

We report about the mechanistic basis guiding the migration pattern of multiple nuclei in hyphae of Ashbya gossypii. Using electron tomography we reconstructed the cytoplasmic microtubule (cMT) cytoskeleton in three tip regions with a total of 13 nuclei and also the spindle microtubules of four mitotic nuclei. Each spindle pole body (SPB) nucleates three cMTs and most cMTs above a certain length are growing according to their plus-end structure. Long cMTs closely align for several microns along the cortex, presumably marking regions where dynein generates pulling forces on nuclei. Close proximity between cMTs emanating from adjacent nuclei was not observed. The majority of nuclei carry duplicated side-by-side SPBs, which together emanate an average of six cMTs, in most cases in opposite orientation with respect to the hyphal growth axis. Such cMT arrays explain why many nuclei undergo short-range back and forth movements. Only occasionally, do all six cMTs orient in one direction, a precondition for long-range nuclear bypassing. Following mitosis, daughter nuclei carry a single SPB with three cMTs. The increased probability that all three cMTs orient in one direction explains the high rate of nuclear bypassing observed in these nuclei. The A. gossypii mitotic spindle was found to be structurally similar to that of Saccharomyces cerevisiae in terms of nuclear microtubule (nMT) number, length distribution and three-dimensional organization even though the two organisms differ significantly in chromosome number. Our results suggest that in A. gossypii two nMTs attach to each kinetochore and not only one like in S. cerevisiae.

Automated tracing of microtubules in electron tomograms of plastic embedded samples of Caenorhabditis elegans embryos

The ability to rapidly assess microtubule number in 3D image stacks from electron tomograms is essential for collecting statistically meaningful data sets. Here we implement microtubule tracing using 3D template matching. We evaluate our results by comparing the automatically traced centerlines to manual tracings in a large number of electron tomograms of the centrosome of the early Caenorhabditis elegans embryo. Furthermore, we give a qualitative description of the tracing results for three other types of samples. For dual-axis tomograms, the automatic tracing yields 4% false negatives and 8% false positives on average. For single-axis tomograms, the accuracy of tracing is lower (16% false negatives and 14% false positives) due to the missing wedge in electron tomography. We also implemented an editor specifically designed for correcting the automatic tracing. Besides, this editor can be used for annotating microtubules. The automatic tracing together with a manual correction significantly reduces the amount of manual labor for tracing microtubule centerlines so that large-scale analysis of microtubule network properties becomes feasible.

Cryo-electron tomography for structural characterization of macromolecular complexes

Cryo-electron tomography (cryo-ET) is an emerging 3-D reconstruction technology that combines the principles of tomographic 3-D reconstruction with the unmatched structural preservation of biological matter embedded in vitreous ice. Cryo-ET is particularly suited to investigating cell-biological samples and large macromolecular structures that are too polymorphic to be reconstructed by classical averaging-based 3-D reconstruction procedures. This unit aims to make cryo-ET accessible to newcomers and discusses the specialized equipment required, as well as relevant advantages and hurdles associated with sample preparation by vitrification and cryo-ET. Protocols describe specimen preparation, data recording and 3-D data reconstruction for cryo-ET, with a special focus on macromolecular complexes. A step-by-step procedure for specimen vitrification by plunge freezing is provided, followed by the general practicalities of tilt-series acquisition for cryo-ET, including advice on how to select an area appropriate for acquiring a tilt series. A brief introduction to the underlying computational reconstruction principles applied in tomography is described, along with instructions for reconstructing a tomogram from cryo-tilt series data. Finally, a method is detailed for extracting small subvolumes containing identical macromolecular structures from tomograms for alignment and averaging as a means to increase the signal-to-noise ratio and eliminate missing wedge effects inherent in tomographic reconstructions.

Quantitative 3D imaging of yeast by hard X-ray tomography

Full-field hard X-ray tomography could be used to obtain three-dimensional (3D) nanoscale structures of biological samples. The image of the fission yeast, Schizosaccharomyces pombe, was clearly visualized based on Zernike phase contrast imaging technique and heavy metal staining method at a spatial resolution better than 50 nm at the energy of 8 keV. The distributions and shapes of the organelles during the cell cycle were clearly visualized and two types of organelle were distinguished. The results for cells during various phases were compared and the ratios of organelle volume to cell volume can be analyzed quantitatively. It showed that the ratios remained constant between growth and division phase and increased strongly in stationary phase, following the shape and size of two types of organelles changes. Our results demonstrated that hard X-ray microscopy was a complementary method for imaging and revealing structural information for biological samples.

What tubulin drugs tell us about microtubule structure and dynamics

A wide range of small molecules, including alkaloids, macrolides and peptides, bind to tubulin and disturb microtubule assembly dynamics. Some agents inhibit assembly, others inhibit disassembly. The binding sites of drugs that stabilize microtubules are discussed in relation to the properties of microtubule associated proteins. The activities of assembly inhibitors are discussed in relation to different nucleotide states of tubulin family protein structures.

The regulated secretory pathway in CD4(+) T cells contributes to human immunodeficiency virus type-1 cell-to-cell spread at the virological synapse

Direct cell-cell spread of Human Immunodeficiency Virus type-1 (HIV-1) at the virological synapse (VS) is an efficient mode of dissemination between CD4(+) T cells but the mechanisms by which HIV-1 proteins are directed towards intercellular contacts is unclear. We have used confocal microscopy and electron tomography coupled with functional virology and cell biology of primary CD4(+) T cells from normal individuals and patients with Chediak-Higashi Syndrome and report that the HIV-1 VS displays a regulated secretion phenotype that shares features with polarized secretion at the T cell immunological synapse (IS). Cell-cell contact at the VS re-orientates the microtubule organizing center (MTOC) and organelles within the HIV-1-infected T cell towards the engaged target T cell, concomitant with polarization of viral proteins. Directed secretion of proteins at the T cell IS requires specialized organelles termed secretory lysosomes (SL) and we show that the HIV-1 envelope glycoprotein (Env) localizes with CTLA-4 and FasL in SL-related compartments and at the VS. Finally, CD4(+) T cells that are disabled for regulated secretion are less able to support productive cell-to-cell HIV-1 spread. We propose that HIV-1 hijacks the regulated secretory pathway of CD4(+) T cells to enhance its dissemination.

A 3D analysis of yeast ER structure reveals how ER domains are organized by membrane curvature

Electron tomography of continuous ER domains during budding shows that reticulons and Yop1 stabilize rather than generate membrane curvature in this organelle.

We analyzed the structure of yeast endoplasmic reticulum (ER) during six sequential stages of budding by electron tomography to reveal a three-dimensional portrait of ER organization during inheritance at a nanometer resolution. We have determined the distribution, dimensions, and ribosome densities of structurally distinct but continuous ER domains during multiple stages of budding with and without the tubule-shaping proteins, reticulons (Rtns) and Yop1. In wild-type cells, the peripheral ER contains cytoplasmic cisternae, many tubules, and a large plasma membrane (PM)–associated ER domain that consists of both tubules and fenestrated cisternae. In the absence of Rtn/Yop1, all three domains lose membrane curvature, ER ribosome density changes, and the amount of PM-associated ER increases dramatically. Deletion of Rtns/Yop1 does not, however, prevent bloated ER tubules from being pulled from the mother cisterna into the bud and strongly suggests that Rtns/Yop1 stabilize/maintain rather than generate membrane curvature at all peripheral ER domains in yeast.

Microtubule tip-interacting proteins: a view from both ends

Microtubule ends serve as sites of tubulin addition and removal, and at the same time play crucial roles in microtubule capture, stabilization and attachment to different cellular structures. Microtubule plus and minus-ends possess distinct structural and dynamic properties, and are recognized, bound and regulated by diverse factors. These include specific capping factors such as γ-tubulin, motors, such as plus-end and minus-end directed kinesins, highly specialized kinetochore-bound microtubule-associated proteins, and comet-making plus-end tracking proteins such as EB1 and its partners. Here, we provide an overview of microtubule tip-interacting proteins and the mechanisms responsible for their association with microtubule ends, and discuss the functional cross-talk between microtubule plus and minus-end binding factors.

Robust polarity specification operates above a threshold of microtubule dynamicity

Microtubule arrays effect cell polarisation by directing cellular cues for cortical remodelling and growth. Their function depends crucially on the intrinsic dynamic properties of constituent microtubules. Microtubule dynamicity is restricted to a certain range within the confines of a cellular geometry. Thus it is of great interest to determine whether rescaling of dynamic properties of microtubules has consequences for cell polarity. We constructed fission yeast strains exhibiting depressed microtubule dynamics by mutating the β-tubulin gene, nda3. This interfered with efficient accumulation of a polarity factor Tea1 at cell tips. Interestingly, the polarity machinery in the mutant cells was highly susceptible to perturbations. Simulations of growth zone formation followed by imaging of actin distribution showed a significantly delayed onset of bipolar growth. We propose that there exists a threshold of microtubule dynamicity that allows robust cellular polarisation.

Unique thylakoid membrane architecture of a unicellular N2-fixing cyanobacterium revealed by electron tomography

Cyanobacteria, descendants of the endosymbiont that gave rise to modern-day chloroplasts, are vital contributors to global biological energy conversion processes. A thorough understanding of the physiology of cyanobacteria requires detailed knowledge of these organisms at the level of cellular architecture and organization. In these prokaryotes, the large membrane protein complexes of the photosynthetic and respiratory electron transport chains function in the intracellular thylakoid membranes. Like plants, the architecture of the thylakoid membranes in cyanobacteria has direct impact on cellular bioenergetics, protein transport, and molecular trafficking. However, whole-cell thylakoid organization in cyanobacteria is not well understood. Here we present, by using electron tomography, an in-depth analysis of the architecture of the thylakoid membranes in a unicellular cyanobacterium, Cyanothece sp. ATCC 51142. Based on the results of three-dimensional tomographic reconstructions of near-entire cells, we determined that the thylakoids in Cyanothece 51142 form a dense and complex network that extends throughout the entire cell. This thylakoid membrane network is formed from the branching and splitting of membranes and encloses a single lumenal space. The entire thylakoid network spirals as a peripheral ring of membranes around the cell, an organization that has not previously been described in a cyanobacterium. Within the thylakoid membrane network are areas of quasi-helical arrangement with similarities to the thylakoid membrane system in chloroplasts. This cyanobacterial thylakoid arrangement is an efficient means of packing a large volume of membranes in the cell while optimizing intracellular transport and trafficking.

Transcriptional and cellular responses to defective mitochondrial proteolysis in fission yeast

Lon and m-AAA are the principal, regulated proteases required for protein maturation and turnover in the mitochondrial matrix of diverse species. To understand their roles in fission yeast (Schizosaccharomyces pombe) mitochondria, we generated deletion strains lacking Lon and m-AAA, individually (Δlon1 and Δm-AAA) or together, Δlon1Δm-AAA (Δ/Δ). All three strains were viable but incapable of respiratory growth on a non-fermentable carbon source due to mitochondrial dysfunction. Confocal and electron microscopy revealed a decrease in membrane potential and ultrastructural changes in Δlon1, Δm-AAA and Δ/Δ mitochondria, consistent with a respiratory defect and aggregation of proteins in the mitochondrial matrix. To understand the global adaptations required for cell survival in the absence of Lon and m-AAA proteases, we compared genome-wide gene expression signatures of the deletion strains with the isogenic wild-type strain. Deletion of lon1 caused a distinctive transcriptional footprint of just 12 differentially expressed genes, 9 of which were up-regulated genes located on the proximal mitochondrial genome (mitochondrial DNA). In contrast, m-AAA deletion caused a much larger transcriptional response involving 268 almost exclusively nuclear genes. Genes ameliorating stress and iron assimilation were up-regulated, while diverse mitochondrial genes and other metabolic enzymes were down-regulated. The connection with iron dysregulation was further explored using biochemical, chemical and cellular assays. Although Δm-AAA and Δ/Δ contained more cellular iron than the wild-type strain, their transcriptomes strongly resembled a signature normally evoked by iron insufficiency or disrupted assembly of iron-sulfur clusters in mitochondria. Based on these findings, we posit that excess iron accumulation could contribute to the pathology of human neurodegenerative disorders arising from defects in m-AAA function.

Electron tomography reveals a flared morphology on growing microtubule ends

Microtubules (MTs) exhibit dynamic instability, alternating between phases of growth and shortening, mostly at their uncapped plus ends. Based on results from cryo-electron microscopy it was proposed that growing MTs display mainly curved sheets and blunt ends; during depolymerisation curled 'ramshorns' predominate. Observations of MTs in mitotic cells have suggested that the situation in vivo differs from that in vitro, but so far, a clear comparison between in vivo and in vitro results has not been possible because MT end structures could not be correlated directly with the dynamic state of that particular MT. Here we combine light microscopy and electron tomography (ET) to show that growing MT plus ends in the fission yeast Schizosaccharomyces pombe display predominantly a flared morphology. This indicates that MT polymerisation in vivo and in vitro can follow different paths.

Correlated fluorescence and 3D electron microscopy with high sensitivity and spatial precision

Correlative electron and fluorescence microscopy has the potential to elucidate the ultrastructural details of dynamic and rare cellular events, but has been limited by low precision and sensitivity. Here we present a method for direct mapping of signals originating from ∼20 fluorescent protein molecules to 3D electron tomograms with a precision of less than 100 nm. We demonstrate that this method can be used to identify individual HIV particles bound to mammalian cell surfaces. We also apply the method to image microtubule end structures bound to mal3p in fission yeast, and demonstrate that growing microtubule plus-ends are flared in vivo. We localize Rvs167 to endocytic sites in budding yeast, and show that scission takes place halfway through a 10-s time period during which amphiphysins are bound to the vesicle neck. This new technique opens the door for direct correlation of fluorescence and electron microscopy to visualize cellular processes at the ultrastructural scale.

How to measure microtubule dynamics?

Microtubules are one of the most spectacular features in the cell: long, fairly rigid tubules that provide physical strength while at the same time serving as tracks of the intracellular transport network. In addition, they are the main constituents of the cell division machinery, and guide axonal growth and the direction of cell migration. To be able to fulfil such diverse functions, microtubules have to be arranged into suitable patterns and remodelled according to extra- and intracellular cues. Moreover, the delicate regulation of microtubule dynamics and the dynamic interactions with subcellular structures, such as kinetochores or cell adhesion sites, appear to be of crucial importance to microtubule functions. It is, therefore, important to understand microtubule dynamics and its spatiotemporal regulation at the molecular level. In this chapter, I introduce the concept of microtubule dynamics and discuss the techniques that can be employed to study microtubule dynamics in vitro and in cells, for many of which detailed protocols can be found in this volume. Microtubule dynamics is traditionally assessed by the four parameters of dynamic instability: growth and shrinkage rates, rescue and catastrophe frequencies, sometimes supplemented by pause duration. I discuss emerging issues with and alternatives to this parameter description of microtubule dynamics.

The fission yeast XMAP215 homolog Dis1p is involved in microtubule bundle organization

Microtubules are essential for a variety of fundamental cellular processes such as organelle positioning and control of cell shape. Schizosaccharomyces pombe is an ideal organism for studying the function and organization of microtubules into bundles in interphase cells. Using light microscopy and electron tomography we analyzed the bundle organization of interphase microtubules in S. pombe. We show that cells lacking ase1p and klp2p still contain microtubule bundles. In addition, we show that ase1p is the major determinant of inter-microtubule spacing in interphase bundles since ase1 deleted cells have an inter-microtubule spacing that differs from that observed in wild-type cells. We then identified dis1p, a XMAP215 homologue, as factor that promotes the stabilization of microtubule bundles. In wild-type cells dis1p partially co-localized with ase1p at regions of microtubule overlap. In cells deleted for ase1 and klp2, dis1p accumulated at the overlap regions of interphase microtubule bundles. In cells lacking all three proteins, both microtubule bundling and inter-microtubule spacing were further reduced, suggesting that Dis1p contributes to interphase microtubule bundling.

Providing positional information with active transport on dynamic microtubules

Microtubules (MTs) are dynamic protein polymers that change their length by switching between growing and shrinking states in a process termed dynamic instability. It has been suggested that the dynamic properties of MTs are central to the organization of the eukaryotic intracellular space, and that they are involved in the control of cell morphology, but the actual mechanisms are not well understood. Here, we present a theoretical analysis in which we explore the possibility that a system of dynamic MTs and MT end-tracking molecular motors is providing specific positional information inside cells. We compute the MT length distribution for the case of MT-length-dependent switching between growing and shrinking states, and analyze the accumulation of molecular motors at the tips of growing MTs. Using these results, we show that a transport system consisting of dynamic MTs and associated motor proteins can deliver cargo proteins preferentially to specific positions within the cell. Comparing our results with experimental data in the model organism fission yeast, we propose that the suggested mechanisms could play important roles in setting length scales during cellular morphogenesis.

Contrasting models for kinetochore microtubule attachment in mammalian cells

Kinetochore function is mediated through its interaction with microtubule plus ends embedded in the kinetochore outer plate. Here, we compare and evaluate current models for kinetochore microtubule attachment, beginning with a brief review of the molecular, biochemical, cellular, and structural studies upon which these models are based. The majority of these studies strongly support a model in which the kinetochore outer plate is a network of fibers that form multiple weak attachments to each microtubule, chiefly through the Ndc80 complex. Multiple weak attachments enable kinetochores to remain attached to microtubule plus ends that are continually growing and shrinking. It is unlikely that rings or "kinetochore fibrils" have a significant role in kinetochore microtubule attachment, but such entities could have a role in stabilizing attachment, modifying microtubule dynamics, and harnessing the energy released from microtubule disassembly. It is currently unclear whether kinetochores control and coordinate the dynamics of individual kinetochore microtubules.

Electron tomography reveals the steps in filovirus budding

The filoviruses, Marburg and Ebola, are non-segmented negative-strand RNA viruses causing severe hemorrhagic fever with high mortality rates in humans and nonhuman primates. The sequence of events that leads to release of filovirus particles from cells is poorly understood. Two contrasting mechanisms have been proposed, one proceeding via a “submarine-like” budding with the helical nucleocapsid emerging parallel to the plasma membrane, and the other via perpendicular “rocket-like” protrusion. Here we have infected cells with Marburg virus under BSL-4 containment conditions, and reconstructed the sequence of steps in the budding process in three dimensions using electron tomography of plastic-embedded cells. We find that highly infectious filamentous particles are released at early stages in infection. Budding proceeds via lateral association of intracellular nucleocapsid along its whole length with the plasma membrane, followed by rapid envelopment initiated at one end of the nucleocapsid, leading to a protruding intermediate. Scission results in local membrane instability at the rear of the virus. After prolonged infection, increased vesiculation of the plasma membrane correlates with changes in shape and infectivity of released viruses. Our observations demonstrate a cellular determinant of virus shape. They reconcile the contrasting models of filovirus budding and allow us to describe the sequence of events taking place during budding and release of Marburg virus. We propose that this represents a general sequence of events also followed by other filamentous and rod-shaped viruses.

The filoviruses, Marburg and Ebola, cause lethal hemorrhagic fever and are highest-priority bioterrorism agents. Filovirus particles contain a rod-like nucleocapsid and are normally filamentous, though other shapes are seen. It is poorly understood how such large filamentous particles are assembled and released from infected cells. Here we have studied Marburg virus production in infected cells using electron tomography. This technique allows virus particles to be visualized in three dimensions at different stages during assembly. We find that in early stages of virus production, highly infectious filamentous viruses are produced, whereas after prolonged infection poorly infectious spherical viruses are released. We also define the sequence of steps in filamentous virus release. The intracellular nucleocapsid first travels to the plasma membrane of the cell, where it binds laterally along its whole length. One end is then wrapped by the plasma membrane and wrapping proceeds rapidly until the virus protrudes vertically from the cell surface. The rear end of the virus particle then pinches off from the cell. We propose that other important filamentous and rod-shaped viruses also follow this series of steps of assembly and budding.

Cell shape and cell division in fission yeast

The fission yeast Schizosaccharomyces pombe has served as an important model organism for investigating cellular morphogenesis. This unicellular rod-shaped fission yeast grows by tip extension and divides by medial fission. In particular, microtubules appear to define sites of polarized cell growth by delivering cell polarity factors to the cell tips. Microtubules also position the cell nucleus at the cell middle, marking sites of cell division. Here, we review the microtubule-dependent mechanisms that regulate cell shape and cell division in fission yeast.

Automated identification of microtubules in cellular electron tomography

We describe a method for automatically finding the location and conformations of microtubules in tomograms of high-pressure frozen, freeze substituted cells. Our approach uses two steps: a preprocessing step that finds locations in the tomograms that are likely to lie inside microtubules and a tracking step that uses the preprocessed data to identify the trajectories of individual microtubules. We test this method on a reconstruction of a Caenorhabditis elegans mitotic spindle and we compare our results with those obtained by a human expert who manually segmented the same data. At present, the method could be used to assist the analysis of large-scale tomography reconstructions. With further improvements, it may be possible to reliably segment cellular tomograms without human intervention.

Three-dimensional cryo-electron microscopy on intermediate filaments

Together with microtubules and actin filaments (F-actin), intermediate filaments (IFs) form the cytoskeleton of metazoan cells. However, unlike the other two entities that are extremely conserved, IFs are much more diverse and are grouped into five different families. In contrast to microtubules and F-actin, IFs do not exhibit a polarity, which may be the reason that no molecular motors travel along them. The molecular structure of IFs is less well resolved than that of the other cytoskeletal systems. This is partially due to their functional variability, tissue-specific expression, and their intrinsic structural properties. IFs are composed mostly of relatively smooth protofibrils formed by antiparallel arranged α-helical coiled-coil bundles flanked by small globular domains at either end. These features make them difficult to study by various electron microscopy methods or atomic force microscopy (AFM). Furthermore, the elongated shape of monomeric or dimeric IF units interferes with the formation of highly ordered three-dimensional (3-D) crystals suitable for atomic resolution crystallography. So far, most of the data we currently have on IF macromolecular structures come from electron microscopy of negatively stained samples, and fragmented α-helical coiled-coil units solved by X-ray diffraction. In addition, AFM allows the observation of the dynamic states of IFs in solution and delivers a new view into the assembly properties of IFs. Here, we discuss the applicability of cryo-electron microscopy (cryo-EM) and cryo-electron tomography (cryo-ET) for the field. Both methods are strongly related and have only recently been applied to IFs. However, cryo-EM revealed distinct new features within IFs that have not been seen before, and cryo-ET adds a 3-D view of IFs revealing the path and number of protofilaments within the various IF assemblies.

Chlamydomonas cryopreparation methods for the 3-D analysis of cellular organelles

Chlamydomonas reinhardtii is a popular model organism in modern cell biology. Historically, methods for preparing this cell for transmission electron microscopy have used conventional chemical fixation that can result in artifacts that affect the 3-D organization of the cell. We have developed improved methods of specimen preparation that involve high-pressure freezing followed by freeze-substitution that are particularly well suited for 3-D studies (O'Toole et al., 2003, 2007). In this chapter, we describe the details of our cryopreparation methods for the optimal preservation of whole cells for immunocytochemistry and electron tomography. Examples are presented that show the utility of this approach for studying the 3-D architecture of membrane systems and cytoskeletal arrays in intact cells.

Three-dimensional reconstruction methods for Caenorhabditis elegans ultrastructure

The roundworm Caenorhabditis elegans is one of the major model organisms in modern cell and developmental biology. Here, we present methods for the three-dimensional (3D) reconstruction of the worm ultrastructure. We describe the use of (1) serial-section analysis, (2) electron tomography, and (3) serial block face imaging by scanning electron microscopy (SEM). Sample preparation for high-pressure freezing/freeze substitution (HPF/FS) has been extensively covered in a previous volume of this "Methods in Cell Biology" series and will only be described briefly. We will discuss these 3D methods in light of recent research activities related to worm and early embryo biology.

Fission yeast a cellular model well suited for electron microscopy investigations

The fission yeast Schizosaccharomyces pombe has become a prominent model in molecular biology, both in yeast genetics and to investigate the molecular mechanism of the cell cycle. It has also proved to be a suitable model organism for looking at cell architecture and ultrastructure using electron microscopy (EM). Here we discuss what makes S. pombe particularly suited to EM and summarize the important discoveries regarding cell organization that have emerged from such studies. We describe the procedures and conventional methods used in EM analysis of fission yeast cells, and lay particular emphasis on cryogenic procedures, which preserve the cell structure in a near-native state, allowing elaborate three-dimensional reconstruction using electron tomography. The chapter also gives several examples of how contemporary EM approaches can be applied to provide a detailed read-out of phenotypes in this versatile cell system. A list of instruments and detailed protocols are provided together with EM-specific reagents required for sample preparation. Finally, potential new avenues of research are discussed, anticipating forthcoming topics in EM as well as new approaches to fission yeast research in the future.

Microtubule-dependent spatial organization of mitochondria in fission yeast

The microtubule cytoskeleton has an important role in the control of mitochondrial distribution in higher eukaryotes. In humans, defects in axonal mitochondrial transport are linked to neurodegenerative diseases. This chapter highlights fission yeast Schizosaccharomyces pombe as a powerful genetic model system for the study of microtubule-dependent mitochondrial movement, dynamics and inheritance.

New and old reagents for fluorescent protein tagging of microtubules in fission yeast; experimental and critical evaluation

The green fluorescent protein (GFP) has become a mainstay of in vivo imaging in many experimental systems. In this chapter, we first discuss and evaluate reagents currently available to image GFP-labeled microtubules in the fission yeast Schizosaccharomyces pombe, with particular reference to time-lapse applications. We then describe recent progress in the development of robust monomeric and tandem dimer red fluorescent proteins (RFPs), including mCherry, TagRFP-T, mOrange2, mKate, and tdTomato, and we present data assessing their suitability as tags in S. pombe. As part of this analysis, we introduce new PCR tagging cassettes for several RFPs, new pDUAL-based plasmids for RFP-tagging, and new RFP-tubulin strains. These reagents should improve and extend the study of microtubules and microtubule-associated proteins in S. pombe.

Toward sub-second correlative light and electron microscopy of Saccharomyces cerevisiae

The yeast Saccharomyces cerevisiae is a model organism widely used to study cell biological processes because of its easy genomic manipulation and its close relatedness to higher eukaryotes. For electron microscopy, the good freezing properties and the small size of yeast cells make it a nearly ideal specimen for the development of cryopreparation techniques. Here we report on the development of a method to correlate yeast cells by live-fluorescence and electron microscopy with the potential to achieve sub-second correlation times. This is possible by plunge-freezing of an optically transparent sample sandwich, so that the temporal resolution is only determined by the transfer speed from the fluorescence microscope to the freezing device. While direct correlation was not yet achieved, the system already offers the possibility to verify the state of the identical population of cells by fluorescence microscopy immediately before freezing and processing for transmission electron microscopy.

A 3D multi-modal and multi-dimensional digital brain model as a framework for data sharing

Computer based three-dimensional reconstruction and co-registration of experimental data provide powerful tools for integration of observation derived from various technical approaches leading to better understanding of brain functions. Here we describe a method to build a 3D multi-modal and multi-dimensional model of brain structures providing framework for data sharing. All image processing, registration and 3D reconstruction were performed using open source software IMOD package software and ImageJ. The reconstruction procedure is based on series of AChE and Nissl stained sections aligned to blockface pictures. Integration of experimental data into the reference model is achieved by co-registration of Nissl sections of experimental brain cases by positioning landmarks on corresponding anatomical structures. To overcome the challenge of comparing for experimental sections with those of the reference model, adjustment of experimental model to the brain model was done section by section and limited to the structures of interest. For this adjustment we stress the use of cytoarchitectural criteria for accurate registration of anatomical structures and co-registration procedures.

Structural basis of EB1 effects on microtubule dynamics

+TIPs (plus-end tracking proteins) are an increasing group of molecules that localize preferentially to the end of growing microtubules. +TIPs regulate microtubule dynamics and contribute to the organization of the microtubular network within the cell. Thus they participate in a wide range of cellular processes including cell division, motility and morphogenesis. EB1 (end-binding 1) is a highly conserved key member of the +TIP group that has been shown to modulate microtubule dynamics both in vitro and in cells. EB1 is involved in accurate chromosome segregation during mitosis and in the polarization of the microtubule cytoskeleton in migrating cells. Here, we review recent in vitro studies that have started to reveal a regulating activity of EB1, and its yeast orthologue Mal3p, on microtubule structure. In particular, we examine how EB1-mediated changes in the microtubule architecture may explain its effects on microtubule dynamics.

The fission yeast TACC protein Mia1p stabilizes microtubule arrays by length-independent crosslinking

Microtubule (MT) arrays are mechanistic effectors of polarity specification and cell division. Linear bundles in which MTs are bridged laterally are dynamically assembled in systems ranging from differentiated metazoan cells to fungi in a process that remains poorly understood. Often, bundled MTs slide with respect to each other via molecular motors. In interphase cells of the fission yeast Schizosaccharomyces pombe, MT nucleation frequently occurs at preexisting arrays. As the nascent MT lengthens, stable antiparallel MT overlaps are thought to form through competition between motion of the minus-end-directed kinesin Klp2p and braking force exerted by the accumulating lateral crosslinker Ase1p. Here we show that Mia1p/Alp7p, a transforming acidic coiled-coil (TACC) protein, functions as a length-independent MT crosslinker. In cells lacking Mia1p MT-bundling activity, linear arrays frequently disassemble, accompanied by a marked increase in Ase1p off rate and erratic motion of sliding MTs. We propose that the combined action of lateral length-dependent (Ase1p) and terminal length-independent (Mia1p) crosslinkers is crucial for robust assembly and stability of linear MT arrays. Such use of qualitatively distinct crosslinking mechanisms in tandem may point to a general design principle in the engineering of stable cytoskeletal assemblies.

The dynamin related protein Dnm1 fragments mitochondria in a microtubule-dependent manner during the fission yeast cell cycle

Mitochondria are dynamic organelles that undergo cycles of fission and fusion. In the fission yeast, Schizosaccharomyces pombe, mitochondria align with microtubules and mitochondrial integrity is dependent upon an intact microtubule cytoskeleton. Here we show that mitochondria re-organize during the cell cycle and that this process is both dynamin- and microtubule-dependent. Microtubule depolymerization results in mitochondrial fragmentation but only when the dynamin-related protein Dnm1 is present. Mitochondrial fusion is, on the other hand, microtubule-independent. dnm1Delta cells, besides showing extensively fused mitochondria, are specifically resistant to anti-microtubule drugs. Dnm1-YFP localizes to foci at sites of mitochondrial severing which occupy the interface between adjacent nucleoids, suggesting the existence of defined mitochondrial "territories," each of which contains a nucleoid. Such territories are lost in dnm1Delta in which nucleoids become aggregated. Mitochondrial ends exhibit motile behavior, extending towards and retracting from the cell poles, independently of the cytoskeleton. We conclude that: (a) mitochondria are organized by microtubules in fission yeast but are not moved by them; (b) Dnm1 mediates mitochondrial fission during interphasic growth and at cell division; (c) the interaction between microtubules and mitochondria, either directly or indirectly via Dnm1, not only modifies the disposition of mitochondria it also modifies the behavior of microtubules. Cell Motil. Cytoskeleton 2009. (c) 2009 Wiley-Liss, Inc.

Nanoscale 3D cellular imaging by axial scanning transmission electron tomography

Electron tomography provides three-dimensional structural information about supramolecular assemblies and organelles in a cellular context but image degradation, caused by scattering of transmitted electrons, limits applicability in specimens thicker than 300 nm. We show that scanning transmission electron tomography of 1000 nm thick samples using axial detection provides resolution comparable to conventional electron tomography. The method is demonstrated by reconstructing a human erythrocyte infected with the malaria parasite Plasmodium falciparum.