Development of bioactive fish gelatin/chitosan nanoparticles composite films with antimicrobial properties

Biobased polymer resources and essential oils: a green combination for antibacterial applications

To fight nosocomial infections, the excessive use of antibiotics has led to the emergence of multidrug-resistant microorganisms, which are now considered a relevant public health threat by the World Health Organization. To date, most antibacterial systems are based on the use of petro-sourced polymers, but the global supplies of these resources are depleting. Besides, silver NPs are widely accepted as the most active biocide against a wide range of bacterial strains but their toxicity is an issue. The growing interest in natural products has gained increasing interest in the last decade. Therefore, the design of functional antibacterial materials derived from biomass remains a significant challenge for the scientific community. Consequently, attention has shifted to naturally occurring substances such as essential oils (EOs), which are classified as Generally Recognized as Safe (GRAS). EOs can offer an alternative to the common antimicrobial agents as an inner solution or biocide agent to inhibit the resistance mechanism. Herein, this review not only aims at providing developments in the antibacterial modes of action of EOs against various bacterial strains and the recent advances in genomic and proteomic techniques for the elucidation of these mechanisms but also presents examples of biobased polymer resource-based EO materials and their antibacterial activities. Especially, we describe the antibacterial properties of biobased polymers, e.g. cellulose, starch, chitosan, PLA PHAs and proteins, associated with EOs (cinnamon (CEO), clove (CLEO), bergamot (BEO), ginger (GEO), lemongrass (LEO), caraway (CAEO), rosemary (REO), Eucalyptus globulus (EGEO), tea tree (TTEO), orange peel (OPEO) and apricot (Prunus armeniaca) kernel (AKEO) essential oils). Finally, we discuss the influence of EOs on the mechanical strength of bio-based materials.

From Classical to Advanced Use of Polymers in Food and Beverage Applications

Polymers are extensively used in food and beverage packaging to shield against contaminants and external damage due to their barrier properties, protecting the goods inside and reducing waste. However, current trends in polymers for food, water, and beverage applications are moving forward into the design and preparation of advanced polymers, which can act as active packaging, bearing active ingredients in their formulation, or controlling the head-space composition to extend the shelf-life of the goods inside. In addition, polymers can serve as sensory polymers to detect and indicate the presence of target species, including contaminants of food quality indicators, or even to remove or separate target species for later quantification. Polymers are nowadays essential materials for both food safety and the extension of food shelf-life, which are key goals of the food industry, and the irruption of smart materials is opening new opportunities for going even further in these goals. This review describes the state of the art following the last 10 years of research within the field of food and beverage polymer's applications, covering present applications, perspectives, and concerns related to waste generation and the circular economy.

The Green Era of Food Packaging: General Considerations and New Trends

Recently, academic research and industries have gained awareness about the economic, environmental, and social impacts of conventional plastic packaging and its disposal. This consciousness has oriented efforts towards more sustainable materials such as biopolymers, paving the way for the “green era” of food packaging. This review provides a schematic overview about polymers and blends of them, which are emerging as promising alternatives to conventional plastics. Focus was dedicated to biopolymers from renewable sources and their applications to produce sustainable, active packaging with antimicrobial and antioxidant properties. In particular, the incorporation of plant extracts, food-waste derivatives, and nano-sized materials to produce bio-based active packaging with enhanced technical performances was investigated. According to recent studies, bio-based active packaging enriched with natural-based compounds has the potential to replace petroleum-derived materials. Based on molecular composition, the natural compounds can diversely interact with the native structure of the packaging materials, modulating their barriers, optical and mechanical performances, and conferring them antioxidant and antimicrobial properties. Overall, the recent academic findings could lead to a breakthrough in the field of food packaging, opening the gates to a new generation of packaging solutions which will be sustainable, customised, and green.

Comparison of Origanum Essential Oil Chemical Compounds and Their Antibacterial Activity against Cronobacter sakazakii

Origanum vulgare L. (oregano) is an aromatic plant with wide applications in the food and pharmaceutical industries. Cronobacter sakazakii, which has a high detection rate in powdered infant formula, adversely impacts susceptible individuals. Oregano essential oil (OEO) is a natural antibacterial agent that can be used to fight bacterial contamination. Here, OEO chemical compounds from eight oregano varieties were analyzed by gas chromatography–mass spectrometry and their antibacterial properties were assessed. The eight OEOs were clustered into two groups and were more diverse in group 2 than in group 1. Six compounds, including p-cymene, 3-thujene, γ-terpinene, thymol, carvacrol, and caryophyllene, were shared by eight OEOs. Among the eight oregano varieties, OEOs from O. vulgare sc2 had the strongest antibacterial activity against C. sakazaki, with the inhibition zone of 18.22mm. OEOs from O. vulgare jx, O. ‘Nvying’, O. vulgare ‘Ehuang’, and O. vulgare ssp. virens were also potent. Moreover, the antibacterial activity of OEOs was positively correlated with the relative content of thymol. As the main OEO antibacterial compound, thymol affected the normal growth and metabolism of C. sakazakii cells by destroying the bacterial membrane and decreasing the intracellular ATP concentration. Thus, in light of the antibacterial activity detected in the OEOs from the eight oregano varieties, this study provides a theoretical foundation for oregano cultivar management and development.

Antibiotic resistance in aquaculture and aquatic organisms: a review of current nanotechnology applications for sustainable management

Aquaculture has emerged as one of the world's fastest-growing food industries in recent years, helping food security and boosting global economic status. The indiscriminate disposal of untreated or improperly managed waste and effluents from different sources including production plants, food processing sectors, and healthcare sectors release various contaminants such as bioactive compounds and unmetabolized antibiotics, and antibiotic-resistant organisms into the environment. These emerging contaminants (ECs), especially antibiotics, have the potential to pollute the environment, particularly the aquatic ecosystem due to their widespread use in aquaculture, leading to various toxicological effects on aquatic organisms as well as long-term persistence in the environment. However, various forms of nanotechnology-based technologies are now being explored to assist other remediation technologies to boost productivity, efficiency, and sustainability. In this review, we critically highlighted several ecofriendly nanotechnological methods including nanodrug and vaccine delivery, nanoformulations, and nanosensor for their antimicrobial effects in aquaculture and aquatic organisms, potential public health risks associated with nanoparticles, and their mitigation measures for sustainable management.

Recent development in nanoencapsulation and delivery of natural bioactives through chitosan scaffolds for various biological applications

Nowadays, nano/micro-encapsulation as a pioneering technique may significantly improve the bioavailability and durability of Natural bioactives. For this purpose, chitosan as a bioactive cationic natural polysaccharide has been frequently used as a carrier because of its distinct chemical and biological properties, including polycationic nature, biocompatibility, and biodegradability. Moreover, polysaccharide-based nano/micro-formulations are a new and extensive trend in scientific research and development in the disciplines of biomedicine, bioorganic/ medicinal chemistry, pharmaceutics, agrochemistry, and the food industry. It promises a new paradigm in drug delivery systems and nanocarrier formulations. This review aims to summarize current developments in approaches for designing innovative chitosan micro/nano-matrix, with an emphasis on the encapsulation of natural bioactives. The special emphasis led to a detailed integrative scientific achievement of the functionalities and abilities for encapsulating natural bioactives and mechanisms regulated in vitro/in vivo release in various biological/physiological environments.

Bio-nanocomposite edible coatings based on arrowroot starch/cellulose nanocrystals/carnauba wax nanoemulsion containing essential oils to preserve quality and improve shelf life of strawberry

This study investigated the effects of bio-nanocomposite coatings developed using arrowroot starch (AA), cellulose nanocrystals (CNC), carnauba wax nanoemulsion (CWN), and Cymbopogon martinii and Mentha spicata essential oils (CEO and MEO, respectively) on the physicochemical, microbiological, bioactive, antioxidant, and aromatic characteristics of strawberries cv. 'Oso Grande' in refrigerated storage for 12 days. The coatings improved the shelf life and stability of strawberries, minimizing their weight loss (2.6-3.9 %), as well as changes in color and texture (except for those coated with CEO), titratable acidity, pH, soluble solids, anthocyanins, phenolic compounds, ascorbic acid content, and antioxidant activity compared with uncoated control strawberries. The bio-nanocomposite coatings containing MEO and CEO also exhibited antimicrobial activity, reduced visible fungal deterioration (40-60 %), and reduced microbial load (3.59-4.03 log CFU g^-1 for mesophilic aerobic bacteria and 4.45-5.22 log CFU g^-1 for fungi and yeast) during storage. They also significantly reduced the severity of decay caused by inoculation with Botrytis cinerea or Rhizopus stolonifer. The coatings altered the volatile profile of the fruits during storage, decreasing aldehyde and alcohol concentrations and increasing ester concentrations. Thus, these bio-nanocomposite coatings, especially those containing MEO, can be used as antimicrobial coating materials to preserve the post-harvest quality of fresh strawberries.

Active Thermoplastic Starch Film with Watermelon Rind Extract for Future Biodegradable Food Packaging

Petrochemical plastic wastes generate serious environmental problems because they are resistant to natural decomposition. The aim of this study was to develop a biodegradable active thermoplastic film composed of polyvinyl alcohol (PVA), corn starch (ST), glycerol, and the active compounds from watermelon rind extract (WMRE), or PVA/ST/WMRE, using the casting technique. The film was examined for its mechanical, antioxidant, and functional properties against selected foodborne pathogens. The results showed that the addition of 10% v/v of watermelon rind extract to the film formulation significantly increased the tensile strength from 19.44 ± 0.84 MPa to 33.67 ± 4.38 MPa and slightly increased the percent elongation at break (% EAB) from 35.04 ± 0.96% to 35.16 ± 1.08%. The antioxidant property of PVA/ST/WMRE film was analyzed based on the DPPH scavenging activity assay, which significantly increased from 29.21 ± 0.24% to 63.37 ± 4.27%. The minimum inhibitory concentration (MIC) of watermelon rind extract was analyzed for the growth inhibition of Bacillus cereus ATCC 11778, Escherichia coli ATCC 8739, and Salmonella enterica subsp. enterica serovar Typhimurium ATCC 13311, with 10% (v/v) found as an optimal concentration against B. cereus. Wrapping fresh-cut purple cabbage with PVA/ST/WMRE film significantly reduced the microbial load after 3 days of storage, in comparison to commercial packaging (PET) and thermoplastic control film. Consumer testing of the packaging film indicated that user acceptance of the product was favorable. Therefore, we suggest that this newly developed film can be used as a biodegradable food packaging item that will lead to enhanced food safety, food quality, prolonged shelf life, and consumer acceptance for further food applications.

Encapsulation of Essential Oils in Nanocarriers for Active Food Packaging

Active packaging improves a packaging system's effectiveness by actively integrating additional components into the packaging material or the headspace around the packaging. Consumer demand and awareness have grown enough to replace chemical agents with natural active agents. Essential oils (EOs) are extensively distributed throughout nature but at low levels and sometimes with poor recovery yields, which poses an issue with their application in food. Due to the instability of EOs when added directly into a food product, they require encapsulation before being added to a packaging matrix such as liposomes, solid-lipid nanoparticles, nano-emulsions, cyclodextrins, and nanostructured lipid nano-carriers. This article is focused on the encapsulation of EOs in different types of nanocarriers. Nanocarriers can improve the efficiency of active substances by providing protection, stability, and controlled and targeted release. The advantages of the many types of nanocarriers that contain active substances that can be used to make antibacterial and antioxidant biopolymeric-based active packaging are discussed. A nanocarrier-encapsulated EO enables the controlled release of oil, stabilizing the packaging for a longer duration.

Investigation of physicochemical properties, antimicrobial and antioxidant activity of edible films based on chitosan/casein containing Origanum vulgare L. essential oil and its effect on quality maintenance of cherry tomato

Edible coatings prevent physicochemical and biological food deterioration. Using bioactive compounds like essential oils can enrich films. In this study, edible films from chitosan (C), casein (Z) and oregano (OEO) were developed, and their physicochemical, barrier, antimicrobial, antioxidant, and structural properties (FTIR, SEM) were investigated. The C₁Z₃ ratio had good mechanical and inhibitory properties, and OEO improves flexibility, barrier, hydrophobic, antimicrobial, and antioxidant properties. The physicochemical and microbiological properties of cherry tomatoes were affected by C₁Z₃ and C₁Z₃O_1.5 coatings. Coated fruits were stored at 4 °C for 32 days. The best results for weight loss, shrinkage, and titratable acidity were found to be 17.88%, 31.12%, and 0.15% in C₁Z₃O_1.5 coated cherry tomatoes, respectively.The TMAB of C₁Z₃O_1.5 coated fruits was less than detectable and the fungal growth was inhibited for 28 days. Accordingly, by adding OEO to chitosan/casein coatings, the spoilage process of cherry tomatoes was delayed for long-term storage.

Simple, One-Pot Method for Preparing Transparent Ethyl Cellulose Films with Good Mechanical Properties

In this research, ethyl cellulose films were prepared by a simple, easy, controlled one-pot method using either ethanol or ethyl lactate as solvents, the films being formed at 6 °C. Titanium dioxide nanoparticles were incorporated to improve the oxygen transmission and water vapour transmission rates of the obtained films. This method used no plasticizers, and flexible materials with good mechanical properties were obtained. The resulting solvent-free and transparent ethyl cellulose films exhibited good mechanical properties and unique free-shapable properties. The obtained materials had similar properties to those reported in the literature, where plasticizers were incorporated into ethyl cellulose films with an elastic modulus of 528 MPa. Contact angles showed the hydrophobic nature of all the prepared materials, with contact angles between 80 and 108°. Micrographs showed the smooth surfaces of the prepared samples and porous intersections with honeycomb-like structures. The oxygen and water vapor transmission rates were the lowest for the ethyl cellulose films prepared in ethyl lactate, these being 615 cm³·m⁻²·day⁻¹ and 7.8 gm⁻²·day⁻¹, respectively, showing that the films have promise for food packaging applications.

Effect of corn stigma extract on physical and antioxidant properties of biodegradable and edible gelatin and corn starch films

The development of bio-based food packaging with antioxidant properties is an important research topic and has gained prominence these days. In this study, bioactive films were developed based gelatin-corn starch (GCS) incorporated with corn stigma extract (CSE) at different concentrations (15% and 25%; w/v). In preliminary tests, the extract maintained cell viability above 90% indicating that it is safe for application as an active ingredient. Insertion of the extract did not influence the thickness of the films but caused a slight change in optical properties. Scanning electron microscopy (SEM) analysis revealed interactions between the extract's bioactive compounds with gelatin and corn starch compounds, which may have improved the mechanical properties (elongation at break, Young's modulus). The addition of 25% corn stigma extract increased the contact angle, giving the film a hydrophobic character. Furthermore, at this concentration, a 15% reduction in water vapor permeability was observed. The elaborated films showed complete biodegradability before the tenth day of the study. It can be inferred that the films with corn stigma extract have good antioxidant properties, indicating that they can be used as an ingredient for food packaging.

Fabrication, characterization, and performance of antimicrobial alginate-based films containing thymol-loaded lipid nanoparticles: Comparison of nanoemulsions and nanostructured lipid carriers

Antimicrobial biopolymer films were prepared by incorporating thymol-loaded nanostructured lipid carriers (NLC) or nanoemulsions (NE) into Ca-alginate solutions. Thymol-loaded-NLCs with thymol/lipid mass ratios of 0.1 and 0.2 were prepared and then used to fabricate NLC/alginate films containing either 20% (NLC20 film) or 10% (NLC10 film) of NLCs. Consequently, these two films had the same total thymol mass fraction: R _{thymol/alginate} = 0.02. A nanoemulsion-loaded film (NE film) containing the same amount of thymol and a neat alginate film (control) were also prepared. Incorporation of the NLCs increased the porosity and surface roughness, thickness, water vapor permeability, and yellowness of the films, but decreased their water contact angle, mechanical strength, and swelling ratio. The release of thymol into the air and into water-ethanol solutions was slower for NLC-loaded than NE-loaded films, moreover being slower for the NLC20 than NLC10 films. The antimicrobial activity of the active films was tested on ground beef samples. Their antimicrobial activity was correlated to their release rates, with the NLC20 film giving the longest protection against the enumerated microorganisms. Our results show that encapsulating antimicrobial essential oils within NLCs was more effective at creating antimicrobial films with sustained release properties than encapsulating them within NEs.

Tuning the Physicochemical, Structural, and Antimicrobial Attributes of Whey-Based Poly (L-Lactic Acid) (PLLA) Films by Chitosan Nanoparticles

Recently, the research and innovation to produce raw materials from microbial processes has gained much attention due to their economic and environmental impacts. Lactic acid is a very important microbial product due to its wide application in the food, pharmaceutical, cosmetic, and chemical industries. In the current study, poly (L-lactic acid) (PLLA) was produced by the ring opening polymerization (ROP) technique of L-lactic acid recovered from whey fermentation, and was used for the production of nanocomposites films reinforced with chitosan nanoparticles (CNPs) (average diameter ca. 100–200 nm). Three different CNPs concentrations, namely 1, 3, and 5% w/w, were tested, and their influence on the physical, mechanical, thermal, antibacterial and structural attributes of PLLA film was assessed. The results showed that the addition of CNPs up to 3% caused a significant improvement in water vapor permeability, appearance, tensile strength and elongation at break. The antibacterial properties of nanocomposites followed a dose-depended pattern as a result of CNPs addition. Therefore, the best inhibitory effects on Escherichia coli and Staphylococcus aureus was made by the addition of 5% of CNPs and lower dosages slightly affected the growth of pathogens or didn't cause any inhibitory effects (in 1% of CNPs). It can be concluded that the incorporation of CNPs into the PLLA matrix allows to improve the structural, thermal, physical, mechanical and antibacterial properties of the polymer, generating promising systems for food packaging and biomedical applications.

Physical and Mechanical Characteristics of Gelatin-Based Films as a Potential Food Packaging Material: A Review

This review discusses the potential application of gelatin-based film as biodegradable food packaging material from various types of gelatin sources. The exploitation of gelatin as one of the biopolymer packaging in the food industry has rising interest among researchers as the world becomes more concerned about environmental problems caused by petroleum-based packaging and increasing consumer demands on food safety. Single gelatin-based film properties have been characterized in comparison with active and intelligent gelatin-based composite films. The physical properties of gelatin-based film such as thickness, color, and biodegradability were much influenced by total solid contents in each film. While, for mechanical and light barrier properties, poultry-based gelatin films have shown better properties compared to mammalian and marine gelatin films. This paper detailed the information on gelatin-based film characterization in comparison with active and intelligent gelatin-based composite films. The physical properties of gelatin-based film such as color, UV-Vis absorption spectra, water vapor permeability, thermal, and moisture properties are discussed along with their mechanical properties, including tensile strength and elongation at break.

Preparation and characterization of gelatin/zein nanofiber films loaded with perillaldehyde, thymol, or ɛ-polylysine and evaluation of their effects on the preservation of chilled chicken breast

Three edible food packaging films loaded with perillaldehyde (P), thymol (T), or ɛ-polylysine (ɛ-PL) in gelatin/zein (G/Z) nanofibers were prepared and characterized. Their effects on the preservation of chilled chicken breast were evaluated. Results showed that the addition of perillaldehyde, thymol, and ɛ-polylysine improved the morphology and diameter of the G/Z. Loading with perillaldehyde improved the elongation and tensile strength of the G/Z/P by 18% and 55%, respectively. The water vapor permeability and oxygen permeability of the G/Z/P were lower than those of the G/Z/T and G/Z/ɛ-PL. X-ray diffraction, differential scanning calorimetry suggested that perillaldehyde enhanced the thermal stability of the G/Z/P. Measurements of 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), total volatile basic nitrogen, and total viable bacterial counts demonstrated that the G/Z/P had good bio-compatibility and effectively prolonged the shelf life of chilled chicken breasts by over 6 days. Therefore, the G/Z/P developed herein has potential application in chilled meat packaging.

Current Trends in the Utilization of Essential Oils for Polysaccharide- and Protein-Derived Food Packaging Materials

Essential oils (EOs) have received attention in the food industry for developing biopolymer-derived food packaging materials. EOs are an excellent choice to replace petroleum-derived additives in food packaging materials due to their abundance in nature, eco-friendliness, and superior antimicrobial and antioxidant attributes. Thus far, EOs have been used in cellulose-, starch-, chitosan-, and protein-based food packaging materials. Biopolymer-based materials have lower antioxidant and antibacterial properties in comparison with their counterparts, and are not suitable for food packaging applications. Various synthetic-based compounds are being used to improve the antimicrobial and antioxidant properties of biopolymers. However, natural essential oils are sustainable and non-harmful alternatives to synthetic antimicrobial and antioxidant agents for use in biopolymer-derived food packaging materials. The incorporation of EOs into the polymeric matrix affects their physicochemical properties, particularly improving their antimicrobial and antioxidant properties. EOs in the food packaging materials increase the shelf life of the packaged food, inhibit the growth of microorganisms, and provide protection against oxidation. Essential oils also influence other properties, such as tensile, barrier, and optical properties of the biopolymers. This review article gives a detailed overview of the use of EOs in biopolymer-derived food packaging materials. The innovative ways of incorporating of EOs into food packaging materials are also highlighted, and future perspectives are discussed.

A Comprehensive Review of the Development of Carbohydrate Macromolecules and Copper Oxide Nanocomposite Films in Food Nanopackaging

Background. Food nanopackaging helps maintain food quality against physical, chemical, and storage instability factors. Copper oxide nanoparticles (CuONPs) can improve biopolymers' mechanical features and barrier properties. This will lead to antimicrobial and antioxidant activities in food packaging to extend the shelf life. Scope and Approach. Edible coatings based on carbohydrate biopolymers have improved the quality of packaging. Several studies have addressed the role of carbohydrate biopolymers and incorporated nanoparticles to enhance food packets' quality as active nanopackaging. Combined with nanoparticles, these biopolymers create film coatings with an excellent barrier property against transmissions of gases such as O2 and CO2. Key Findings and Conclusions. This review describes the CuO-biopolymer composites, including chitosan, agar, cellulose, carboxymethylcellulose, cellulose nanowhiskers, carrageenan, alginate, starch, and polylactic acid, as food packaging films. Here, we reviewed different fabrication techniques of CuO biocomposites and the impact of CuONPs on the physical, mechanical, barrier, thermal stability, antioxidant, and antimicrobial properties of carbohydrate-based films.

Fish Gelatin: Current Nutritional, Medicinal, Tissue Repair Applications and Carrier of Drug Delivery

Gelatin is obtained via partial denaturation of collagen and is extensively used in various industries. The majority of gelatin utilized globally is derived from a mammalian source. Several health and religious concerns associated with porcine/bovine gelatin were reported. Therefore, gelatin from a marine source is widely being investigated for its efficiency and utilization in a variety of applications as a potential substitute for porcine/bovine gelatin. Although fish gelatin is less durable and possesses lower melting and gelling temperatures compared to mammal-derived gelatin, various modifications are being reported to promote its rheological and functional properties to be efficiently employed. The present review describes in detail the current innovative applications of fish gelatin involving the food industry, drug delivery and possible therapeutic applications. Gelatin bioactive molecules may be utilized as carriers for drug delivery. Due to its versatility, gelatin can be used in different carrier systems, such as microparticles, nanoparticles, fibers and hydrogels. The present review also provides a perspective on the other potential pharmaceutical applications of fish gelatin, such as tissue regeneration, antioxidant supplementation, antihypertensive and anticancer treatments.

Biodegradability, physical, mechanical and antimicrobial attributes of starch nanocomposites containing chitosan nanoparticles

This study aimed to develop a plasticized starch (PS) based film loaded with chitosan nanoparticles (CNPs, 1, 2, 3, and 4%) as a reinforcing and antibacterial agent. We examined the morphology, biodegradability, mechanical, thermo-mechanical, and barrier properties of the PS/CNPs films. The antimicrobial activity against both Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria was investigated by colony forming unit (CFU) and disc diffusion methods. A dense structure was obtained for all PS/CNPs films and, thus, their complete biodegradation occurred in more days than neat PS. The increase in the CNPs percentage led to improved mechanical behaviour and barrier properties. PS-CNPs composite films revealed inhibition zones against both E. coli and S. aureus, with the 100% reduction in CFU against S. aureus. The current study exhibited that PS-CNPs films were more effective in inhibiting bacteria growth than neat PS film, confirming the composite films potential application as antimicrobial food packaging.

Application of Nanotechnology to Improve the Performance of Biodegradable Biopolymer-Based Packaging Materials

There is great interest in developing biodegradable biopolymer-based packaging materials whose functional performance is enhanced by incorporating active compounds into them, such as light blockers, plasticizers, crosslinkers, diffusion blockers, antimicrobials, antioxidants, and sensors. However, many of these compounds are volatile, chemically unstable, water-insoluble, matrix incompatible, or have adverse effects on film properties, which makes them difficult to directly incorporate into the packaging materials. These challenges can often be overcome by encapsulating the active compounds within food-grade nanoparticles, which are then introduced into the packaging materials. The presence of these nanoencapsulated active compounds in biopolymer-based coatings or films can greatly improve their functional performance. For example, anthocyanins can be used as light-blockers to retard oxidation reactions, or they can be used as pH/gas/temperature sensors to produce smart indicators to monitor the freshness of packaged foods. Encapsulated botanical extracts (like essential oils) can be used to increase the shelf life of foods due to their antimicrobial and antioxidant activities. The resistance of packaging materials to external factors can be improved by incorporating plasticizers (glycerol, sorbitol), crosslinkers (glutaraldehyde, tannic acid), and fillers (nanoparticles or nanofibers). Nanoenabled delivery systems can also be designed to control the release of active ingredients (such as antimicrobials or antioxidants) into the packaged food over time, which may extend their efficacy. This article reviews the different kinds of nanocarriers available for loading active compounds into these types of packaging materials and then discusses their impact on the optical, mechanical, thermal, barrier, antioxidant, and antimicrobial properties of the packaging materials. Furthermore, it highlights the different kinds of bioactive compounds that can be incorporated into biopolymer-based packaging.

Alginate with citrus pectin and pterostilbene as healthy food packaging with antioxidant property

A new type of film packaging made from natural polysaccharide materials, with its environmental safety and friendliness, is considered as a potential substitute for plastics. Novel polysaccharide composite films based upon citrus pectin (CP) and sodium alginate (SA) were successfully prepared and characterized, containing pterostilbene (PTE) at various concentrations (0.2, 0.4, 0.8, 1.6, 3.2 mM). The rheological analysis displayed that all film-forming liquids performed no gelation behavior with G" > G' at low frequency and weak gelation with G" < G' at high frequency. The SA-CP films had good tensile strength (TS) and elongation at break (EB), while adding PTE as an antioxidant to the film reduced both the values. Of note, the SA-CP films with PTE had better moisture resistance than that of the pure SA-CP films, which was related to the changes of its microstructure. The increased roughness of the films containing PTE was observed by microscope. After calcium chloride cross-linking, the water solubility of the films was reduced, while its thermal stability was improved. Notably, the accretion of PTE expressively enhanced the antioxidant properties of the SA-CP films. Thus, the SA-CP composite films containing PTE could be utilized as an excellent antioxidant packaging material.

Multifunctional Gelatin/Chitosan Electrospun Wound Dressing Dopped with Undaria pinnatifida Phlorotannin-Enriched Extract for Skin Regeneration

The similarities of electrospun fibers with the skin extracellular matrix (ECM) make them promising structures for advanced wound dressings. Moreover, infection and resistance in wounds are a major health concern that may be reduced with antibacterial wound dressings. In this work, a multifunctional wound dressing was developed based on gelatin/chitosan hybrid fibers dopped with phlorotannin-enrich extract from the seaweed Undaria pinnatifida. The intrinsic electrospun structure properties combined with the antimicrobial and anti-inflammatory properties of phlorotannin-enrich extract will enhance the wound healing process. Electrospun meshes were produced by incorporating 1 or 2 wt% of extract, and the structure without extract was used as a control. Physico-chemical, mechanical, and biological properties were evaluated for all conditions. Results demonstrated that all developed samples presented a homogenous fiber deposition with the average diameters closer to the native ECM fibrils, and high porosities (~90%) that will be crucial to control the wound moist environment. According to the tensile test assays, the incorporation of phlorotannin-enriched extract enhances the elastic performance of the samples. Additionally, the extract incorporation made the structure stable over time since its in vitro degradation rates decreased under enzymatic medium. Extract release profile demonstrated a longstanding delivery (up to 160 days), reaching a maximum value of ~98% over time. Moreover, the preliminary antimicrobial results confirm the mesh's antimicrobial activity against Pseudomonas aeruginosa and Staphylococcus aureus. In terms of biological characterization, no condition presented cytotoxicity effects on hDNF cells, allowing their adhesion and proliferation over 14 days, except the condition of 2 wt% after 7 days. Overall, the electrospun structure comprising phlorotannins-enriched extract is a promising bioactive structure with potential to be used as a drug delivery system for skin regeneration by reducing the bacterial infection in the wound bed.

Preparation and characterization of polylactic acid nanofiber films loading Perilla essential oil for antibacterial packaging of chilled chicken

Biodegradable and eco-friendly food packaging materials have attracted attention. Novel blending films were prepared with polylactic acid (PLA) and Perilla essential oil (PEsO). The morphological features of the nanofibers were modulated by adjusting process parameters (e.g. PLA solution concentration, applied voltage and ultrasonic power). The optimal spinning concentrations, applied voltages and ultrasonic power of the PLA solutions were set at 15% (m/v), 20 kV and 640 W, respectively. Compared with the PLA films, the addition of PEsO increased the diameter of the nanofibers and solvent resistance and reduced the swelling rate of the PLA/PEsO films. The breakage elongation and the gas barrier properties significantly improved when 2% (w/w) PEsO was used. Fourier infrared spectroscopy, X-ray diffractometer, thermogravimetry and differential scanning were used in analyzing the potential interactions of the film matrices. The PLA/PEsO films had good biocompatibility and antibacterial and antioxidant properties. The PLA/PEsO (1:0.02) film loaded with 2% PEsO extended the shelf life of chilled chicken to 12 days, as indicated by the measured total volatile basic nitrogen (TVB-N), total viable count and pH value. Therefore, PLA/PEsO films have great potential as fresh-keeping packaging.

Advances in Functional Biopolymer-Based Nanocomposites for Active Food Packaging Applications

Polymeric nanocomposites have received significant attention in both scientific and industrial research in recent years. The demand for new methods of food preservation to ensure high-quality, healthy foods with an extended shelf life has increased. Packaging, a crucial feature of the food industry, plays a vital role in satisfying this demand. Polymeric nanocomposites exhibit remarkably improved packaging properties, including barrier properties, oxygen impermeability, solvent resistance, moisture permeability, thermal stability, and antimicrobial characteristics. Bio-based polymers have drawn considerable interest to mitigate the influence and application of petroleum-derived polymeric materials and related environmental concerns. The integration of nanotechnology in food packaging systems has shown promise for enhancing the quality and shelf life of food. This article provides a general overview of bio-based polymeric nanocomposites comprising polymer matrices and inorganic nanoparticles, and describes their classification, fabrication, properties, and applications for active food packaging systems with future perspectives.

Improvement of the Antimicrobial Activity of Oregano Oil by Encapsulation in Chitosan-Alginate Nanoparticles

Oregano oil (OrO) possesses well-pronounced antimicrobial properties but its application is limited due to low water solubility and possible instability. The aim of this study was to evaluate the possibility to incorporate OrO in an aqueous dispersion of chitosan—alginate nanoparticles and how this will affect its antimicrobial activity. The encapsulation of OrO was performed by emulsification and consequent electrostatic gelation of both polysaccharides. OrO-loaded nanoparticles (OrO-NP) have small size (320 nm) and negative charge (−25 mV). The data from FTIR spectroscopy and XRD analyses reveal successful encapsulation of the oil into the nanoparticles. The results of thermogravimetry suggest improved thermal stability of the encapsulated oil. The minimal inhibitory concentrations of OrO-NP determined on a panel of Gram-positive and Gram-negative pathogens (ISO 20776-1:2006) are 4–32-fold lower than those of OrO. OrO-NP inhibit the respiratory activity of the bacteria (MTT assay) to a lower extent than OrO; however, the minimal bactericidal concentrations still remain significantly lower. OrO-NP exhibit significantly lower in vitro cytotoxicity than pure OrO on the HaCaT cell line as determined by ISO 10993-5:2009. The irritation test (ISO 10993-10) shows no signs of irritation or edema on the application site. In conclusion, the nanodelivery system of oregano oil possesses strong antimicrobial activity and is promising for development of food additives.

Preparation and characterization of succinyl chitosan and succinyl chitosan nanoparticle film: In vitro and in vivo evaluation of wound healing activity

Development of novel wound dressing materials having the ability to prevent bacterial infections and capable of accelerating the tissue regeneration process is utmost important, since the wounds in patients can cause severe health issues. In the present work, we synthesized novel N-succinyl chitosan nanoparticles (N-SuC NPs) films and tested their antimicrobial, cytotoxicity, and in vitro and in vivo wound healing activity. N-SuC NPs were synthesized by ionic gelation method, and subsequently N-SuC NPs films were prepared by solution casting method using synthesized N-SuC NPs. The prepared N-SuC NPs films showed significant antimicrobial activity against Escherichia coli and Staphylococcus aureus with a minimum inhibitory concentration of 6 mg/mL and <8 mg/mL, respectively. The biocompatibility and the in vitro wound healing activity of N-SuC NPs films were analyzed using human dermal fibroblast (HDF) cells. In vivo cutaneous wound healing of the N-SuC NPs film was investigated using the Wister rat model, and the studies showed that the N-SuC NPs film significantly accelerated the wound healing process by inducing more blood vessels formation and tissue granulation. The experimental results showed that synthesized N-SuC NPs film had excellent antimicrobial, cytotoxicity and wound healing activity, indicating that it could be used in biomedical applications.