Effects of high pressure modification on conformation and gelation properties of myofibrillar protein

Ultra-high pressure improved gelation and digestive properties of Tai Lake whitebait myofibrillar protein

This study investigated the effects of ultra-high pressure (UHP) at different levels on the physicochemical properties, gelling properties, and in vitro digestion characteristics of myofibrillar protein (MP) in Tai Lake whitebait. The α-helix gradually unfolded and transformed into β-sheet as the pressure increased from 0 to 400 MPa. In addition, the elastic modulus (G') and viscous modulus (G'') of the 400 MPa-treated MP samples increased by 4.8 and 3.8 times, respectively, compared with the control group. The gel properties of the MP also increased significantly after UHP treatment, e.g., the gel strength increased by a 4.8-fold when the pressure reached 400 Mpa, compared with the control group. The results of in vitro simulated digestion showed that the 400 MPa-treated MP gel samples showed a 1.8-fold increase in digestibility and a 69.6 % decrease in digestible particle size compared with the control group.

Study on the thawing characteristics of beef in ultrasound combined with plasma-activated water

The effects of deionized water thawing (DT), plasma-activated water thawing (PT), ultrasound (150 W, 40 kHz) combined with deionized water thawing (UDT), and ultrasound combined with plasma-activated water thawing (UPT) on the thawing characteristics and the physicochemical properties of the beef were investigated. The results showed that the UPT group had a faster thawing rate (38 % higher compared to the PT group) and good bactericidal ability (75 % higher compared to the UDT group), and had no adverse effect on the color and pH value of the beef. Plasma-activated water (PAW) can maintain the stability of the beef fiber, improve the water holding capacity (WHC), inhibit lipid oxidation, and reduce the loss of soluble substances such as protein. Therefore, UPT thawing is a promising meat thawing technology, which provides practical guidance and methods for the wide application of UPT in the field of meat thawing.

Evaluation of the Quality Changes in Three Commercial Pastourma Samples during Refrigerated Storage Using Physicochemical, Microbiological, and Image Analyses Combined with Chemometrics

Despite the inherent stability of dried and cured products, such as pastourma, appropriate refrigeration remains essential for preserving their optimal characteristics. This study explored quality and safety characteristics in lamb, beef, and buffalo pastourma during 16-day refrigeration storage after package opening. The comprehensive approach employed Attenuated Total Reflection-Fourier-Transform Infrared (ATR-FTIR) spectroscopy, colorimetry, and image analysis, alongside physicochemical and microbiological analyses, to shed light on these alterations. The findings reveal a reduction in textural uniformity and color vibrancy (fading reds and yellows) across all samples during storage, with lamb pastourma exhibiting the most pronounced effects. Notably, image analysis emerged as a powerful tool, enabling the accurate classification of samples based on storage duration. Additionally, significant variations were observed in moisture content, hue angle, firmness, and TBARS levels, highlighting their influence on pastourma quality. The study documented a gradual decrease in lactic acid bacteria and aerobic plate count populations over time. ATR-FTIR spectra's interpretation revealed the presence of lipids, proteins, carbohydrates, and water. Protein secondary structures, demonstrably influenced by the meat type used, exhibited significant changes during storage, potentially impacting the functional and textural properties of pastourma. Overall, the findings contribute to a deeper understanding of pastourma spoilage during storage, paving the way for the development of improved preservation and storage strategies.

Oxidation affects pH buffering capacity of myofibrillar proteins via modification of histidine residue and structure of myofibrillar proteins

The pH buffering capacity is an important functionality of muscle proteins, and muscle foods are susceptible to being oxidized during storage and processing. In order to study the effect of oxidation on the pH buffering capacity of myofibrillar proteins, myofibrils extracted from snakehead fish (Channa argus) were oxidized with H2O2. Results showed that increased oxidation led to loss of free sulfhydryl groups, formation of carbonyl groups, increased surface hydrophobicity, and aggregation of myofibrillar proteins. In addition, there was a significant reduction in the content of histidine in oxidized myofibrillar proteins. The pH buffering capacity of myofibrillar proteins significantly decreased from 3.14 ± 0.03 mM H+/(mL × ΔpH) down to 2.55 ± 0.03 mM H+/(mL × ΔpH) after oxidation with 50 mM H2O2. Both oxidized myofibrillar proteins and histidine showed a high pH buffering capacity at pH near 5.8, which is the histidine pKa value. Here, we hypothesize that oxidation-induced changes in the pH buffering capacity of myofibrillar proteins were driven by oxidative modification of histidine and structural changes of myofibrillar proteins. The significance of this study to food industry may be the awareness that protein oxidation may affect pH through changes in buffering capacity. And the use of antioxidants, especially those targeting at histidine will be promising in addressing this issue.

Effect of electron beam irradiation on the structural characteristics and functional properties of goat's milk casein

The effects of electron beam irradiation (EBI) at different doses (0, 2, 4, 6, 8, and 10 kGy) were investigated on the structural and functional properties of casein, including their interrelationship. A gradual reduction in the α-helix content of the secondary structure (as a stable structure) indicates that casein under EBI treatment mainly undergoes fragmentation and aggregation from a structural perspective. Furthermore, the hydrophobic group and tryptophan in the tertiary structure were exposed, which opened up the internal structure of the protein. In addition, a continuously increasing irradiation dose led to casein aggregation, as confirmed by electron microscopy. The structural changes affected its functional properties, such as solubility, emulsification, foaming, and rheological properties, all of which increased first and subsequently decreased. Finally, at irradiation doses of 4-6 kGy, casein was modified to exhibit optimal functional properties, which enhanced its food processing value and performance.

Effects of static magnetic field (SMF) and alternating magnetic field (AMF) assisted freezing on the microstructure and protein properties of channel catfish (Ictalurus punctatus) fillet

The effect of static and alternating magnetic fields assisted freezing with intensity of 1, 2, and 3 mT on the microstructure and protein properties of channel catfish fillet were investigated. The results showed that the magnetic field treatment shortened the phase transition time of freezing, and significantly reduced the size of the formed ice crystals. The changes of trichloroacetic acid-soluble peptide, Ca2+-ATPase activity, particle size, and Zeta potential, which represented solubility, denaturation and aggregation of protein, indicated that magnetic field treatment could improve the protein stability. The chemical force analysis, sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), and Fourier transform infrared spectroscopy (FTIR) results proved that the magnetic field could change the structure of protein. Furthermore, these changes had effects on the thermal stability of catfish meat protein which reflected by increasing of the transition temperature and enthalpy. However, the waveform and intensity of magnetic field affected the stability of protein structure.

Effect of high pressure pretreatment on the inhibition of ice nucleation and biochemical changes in pork loins during supercooling preservation

In this study, the effect of high pressure (HP) pretreatment on the stability of pork loins during supercooling (SC) preservation was investigated, and the freshness and postmortem metabolism of pork loins preserved by SC was evaluated. Based on the differential scanning calorimetry (DSC), the peak enthalpies of 200 MPa treatment were lower than those of 50 MPa treatment (P < 0.05). For the nuclear magnetic resonance (NMR) relaxometry, extramyofibrillar water in pork loins was decreased with increasing intermyofibrillar water at >100 MPa (P < 0.05). Compared to unpressurized control all HP treatment had less α-helix structure while random coil was dominated from the Fourier transform infrared (FTIR) spectroscopy (P < 0.05). A 200 MPa was selected to estimate the relationship between HP pretreatment and stability of SC preservation of pork loins. The HP-treated pork loins showed high stability during SC preservation under the relatively low temperature algorithm. Compared to fresh control, HP pretreatment caused physicochemical changes of pork loins which did not recover even after 2 weeks of preservation. Nevertheless, HP followed by SC preservation was able to reduce property changes better than pork loins preserved by normal refrigeration. According to the analyses of transmission electron microscopy (TEM), the HP pretreatment influenced the postmortem biochemical metabolism of pork loins, however, it did not affect the freshness and quality parameters of pork loins due to the subsequently applied low preservation temperature of SC. Therefore, this study demonstrated that moderate HP pretreatment was a potential pretreatment for SC preservation of pork loins.

Oxidative Modification, Structural Conformation, and Gel Properties of Pork Paste Protein Mediated by Oxygen Concentration in Modified Atmosphere Packaging

The objective of this study was to investigate the effect of pork oxidation through modified atmosphere packaging (MAP) on gel characteristics of myofibrillar proteins (MP) during the heat-induced gelation process. The pork longissimus thoracis (LT) was treated by MAP at varying oxygen concentrations (0, 20, 40, 60, and 80% O2) with a 5-day storage at 4 °C for the detection of MP oxidation and gel properties. The findings showed the rise of O2 concentration resulted in a significant increase of carbonyl content, disulfide bond, and particle size, and a decrease of sulfhydryl content and MP solubility (p < 0.05). The gel textural properties and water retention ability were significantly improved in MAP treatments of 0-60% O2 (p < 0.05), but deteriorated at 80% O2 level. As the concentration of O2 increased, there was a marked decrease in the α-helix content within the gel, accompanied by a simultaneous increase in β-sheet content (p < 0.05). Additionally, a judicious oxidation treatment (60% O2 in MAP) proved beneficial for crafting dense and uniform gel networks. Our data suggest that the oxidation treatment of pork mediated by O2 concentration in MAP is capable of reinforcing protein hydrophobic interaction and disulfide bond formation, thus contributing to the construction of superior gel structures and properties.

Insight into the physicochemical characteristics, functionalities and digestion behavior of protein isolate derived from Lactarius volemus (L.volemus): Impacts of microwave-assisted extraction

The impacts of microwave assisted-extraction (MAE) on the physicochemical characteristics, functionalities, and digestion behavior of Lactarius volemus (L. volemus) protein isolate (LPIs) was investigated. Compared with the conventional water bath assisted-extraction method (WAE), MAE significantly enhanced the extraction rate of LPIs by 30.00% and 47.98% at 20 and 60 min, respectively. Also, MAE unfolded the spatial structure of LPIs, promoting the transformation from ordered structure to disordered structure, exposing its hydrophobic groups and increasing free sulfhydryl content. In addition, LPIs obtained by MAE showed better solubility, emulsifying and foaming characteristics than that by WAE. MAE method can improve the digestibility and the degree of hydrolysis of LPIs compared to WAE, which were increased by 6.06% and 19.78% after 20 min extraction in the small intestine digestion, respectively. This study can provide a potential strategy to produce L. volemus protein isolate with high efficiency and quality.

Food Processing and Nutrition Strategies for Improving the Health of Elderly People with Dysphagia: A Review of Recent Developments

Dysphagia, or swallowing difficulty, is a common morbidity affecting 10% to 33% of the elderly population. Individuals with dysphagia can experience appetite, reduction, weight loss, and malnutrition as well as even aspiration, dehydration, and long-term healthcare issues. However, current therapies to treat dysphagia can routinely cause discomfort and pain to patients. To prevent these risks, a non-traumatic and effective treatment of diet modification for safe chewing and swallowing is urgently needed for the elderly. This review mainly summarizes the chewing and swallowing changes in the elderly, as well as important risk factors and potential consequences of dysphagia. In addition, three texture-modified food processing strategies to prepare special foods for the aged, as well as the current statuses and future trends of such foods, are discussed. Nonthermal food technologies, gelation, and 3D printing techniques have been developed to prepare soft, moist, and palatable texture-modified foods for chewing and swallowing safety in elderly individuals. In addition, flavor enhancement and nutrition enrichment are also considered to compensate for the loss of sensory experience and nutrients. Given the trend of population aging, multidisciplinary cooperation for dysphagia management should be a top priority.

The technical potential of a sous-vide processing method for developing high-moisture textured soy protein

This study explored the potential of sous-vide processing as a novel technique for transforming low-moisture textured soy protein (TSP) into a product with high moisture content and texture comparable to meat. We hypothesized that the sous-vide treatment would enable precise control of the TSP microstructure. In the ensuing process, the TSP maintained the moisture content at approximately 70% and changed color towards darker tones. Additionally, the porous microstructure changed, transitioning from a large to a smaller air layer. As the treatment continued, both the hardness and texturization index of the TSP were reduced. Furthermore, the secondary structure of the protein exhibited an increase in β-sheet and α-helix structures, indicating enhanced hydrogen bonds, hydrophobic interactions, and disulfide bonds. Optimally, a sample with 24 h at 90℃ displayed textural characteristics similar to chicken breast. The investigation underlines the sous-vide method as a revolutionary technique yielding high-moisture content and improved texture for TSP.

The changed structures of Cyperus esculentus protein decide its modified physicochemical characters: Effects of ball-milling, high pressure homogenization and cold plasma treatments on structural and functional properties of the protein

Three physical treatments, including ball-milling (BM), high pressure homogenization (HPH) and cold plasma (CP) were applied to modify structural and functional properties of Cyperus esculentus protein (CEP). The results showed that three treatments significantly altered morphology and reduced particle size of CEP. Both primary and secondary structures of CEP were hardly changed, while disulfide bonds and hydrophobic forces between amino acid residues of CEP were interrupted by three treatments, releasing free sulfhydryls and hydrophobic groups. With the free moiety accumulation, the reformed interactions between them enhanced the crystallinity and thermostability of CEP. Besides, solubility and emulsifying properties of CEP were significantly improved within a certain range of treatment duration and intensity, and three treatments decreased water but increased oil holding capacity of CEP. Conclusively, the modified physicochemical properties of CEP were decided by the changed molecular structures of CEP, and different treatments may satisfy different processing requirements for the protein.

Effect of Molecular Weight on the Structural and Emulsifying Characteristics of Bovine Bone Protein Hydrolysate

The emulsifying capacity of bovine bone protein extracted using high-pressure hot water (HBBP) has been determined to be good. Nevertheless, given that HBBP is a blend of peptides with a broad range of molecular weights, the distinction in emulsifying capacity between polypeptide components with high and low molecular weights is unclear. Therefore, in this study, HBBP was separated into three molecular weight components of 10-30 kDa (HBBP 1), 5-10 kDa (HBBP 2), and <5 kDa (HBBP 3) via ultrafiltration, and the differences in their structures and emulsifying properties were investigated. The polypeptide with the highest molecular weight displayed the lowest endogenous fluorescence intensity, the least solubility in an aqueous solution, and the highest surface hydrophobicity index. Analysis using laser confocal Raman spectroscopy showed that with an increase in polypeptide molecular weight, the α-helix and β-sheet contents in the secondary structure of the polypeptide molecule increased significantly. Particle size, rheological characteristics, and laser confocal microscopy were used to characterize the emulsion made from peptides of various molecular weights. High-molecular-weight peptides were able to provide a more robust spatial repulsion and thicker interfacial coating in the emulsion, which would make the emulsion more stable. The above results showed that the high-molecular-weight polypeptide in HBBP effectively improved the emulsion stability when forming an emulsion. This study increased the rate at which bovine bone was utilized and provided a theoretical foundation for the use of bovine bone protein as an emulsifier in the food sector.

Quantitative analysis of the correlation between gel strength and microstructure of shrimp surimi gel induced by dense phase carbon dioxide

The impact of treatment pressure, temperature and time of DPCD on the Pacific White Shrimp (Litopenaeus vannamei) surimi gel properties was studied and compared with the conventional heat treatment. The gel strength, crosslinking degree, and microstructure of shrimp surimi gels were investigated. Quantitative microstructural characteristics were investigated to elucidate the changes in microstructure during the formation of gel induced by DPCD. With increased DPCD treatment setting conditions, the gel strength and crosslinking degree of shrimp surimi gel significantly improved (P < 0.05) with similar variation trends. Quantitative microstructural analysis revealed that the fractal dimension (Df) and the pore equivalent diameter of gel microstructure increased with the increase of DPCD treatment conditions. The lacunarity decreased and then increased, whereas pore number increased and decreased. According to the microstructural characteristics results, the surimi gel with 51.48 % degree of crosslinking induced at 25 MPa, 50˚C, and 60 min showed the most complex and homogeneous microstructure with the highest (Df), smaller lacunarity, an average pore equivalent diameter, and a larger pore number. The correlation analysis demonstrated that the crosslinking degree was strongly positively correlated with the gel strength. The Df, pore equivalent diameter and number of pores significantly positively correlated with the crosslinking degree, whereas the lacunarity strongly negatively correlated with the crosslinking degree. The present study showed that the DPCD treatment with a crosslinking degree of 51.48 % is the most optimum condition for better gel formation. The study could provide a theoretical basis for processing shrimp surimi with improved gel properties.

A comparative study of the impacts of preparation techniques on the rheological and textural characteristics of emulsion gels (emulgels)

A subtype of soft solid-like substances are emulsion gels (emulgels; EGs). These composite material's structures either consist of a network of aggregated emulsion droplets or a polymeric gel matrix that contains emulsion droplets. The product's rheological signature can be used to determine how effective it is for a specific application. The interactions between these structured system's separate components and production process, however, have a substantial impact on their rheological imprint. Therefore, rational comprehension of interdependent elements, their structural configurations, and the resulting characteristics of a system are essential for accelerating our progress techniques as well as for fine-tuning the technological and functional characteristics of the finished product. This article presents a comprehensive overview of the mechanisms and procedures of producing EGs (i.e., cold-set and heat-set) in order to determine the ensuing rheological features for various commercial applications, such as food systems. It also describes the influence of these methods on the rheological and textural characteristics of the EGs. Diverse preparation methods are the cause of the rheological-property correlations between different EGs. In many ways, EGs can be produced using various matrix polymers, processing techniques, and purposes. This may lead to various EG matrix structures and interactions between them, which in turn may affect the composition of EGs and ultimately their textural and rheological characteristics.

Improving the quality and processing efficiency of beef jerky via drying in confined conditions of pre-stretching

Inspired by the mechanical enhancement of hydrogel via drying in confined conditions, we applied this strategy to beef jerky manufacture for improving the quality and processing efficiency. In our study, beef strips were pre-stretched and then dried in a tensile state, and the confined conditions were achieved by controlling the stretched strains from 20% to 120%. Compared with the sample dried freely, beef jerky dried in confined conditions of different pre-stretching strains exhibited improved quality based on texture and sensory analysis. Additionally, this method also enhanced processing efficiency by reducing approximately 50% drying time. The excellent sensory quality and good texture of beef jerky were obtained as the pre-stretching strain was 80%. Drying beef strips in confined conditions made muscle fibers tense and enhanced hydrophobicity of myofibrillar proteins, leading to a compact structure with high shear force and anisotropy, and rapid water loss in beef jerky. This facile and green method provides a promising route to enrich the existing technologies of jerky processing.

Effects of hydrocolloids as fat-replacers on the physicochemical and structural properties of salt-soluble protein isolated from water-boiled pork meatballs

Konjac glucomannan (KGM), xanthan gum (XG), guar gum (GG), and κ-carrageenan (KC), as substituent, are commonly used in ground pork products. Here, the content of these (0.5, 1.0, 1.5, and 2.0%, w/w) on the gel properties, thermal properties, and interaction forces of salt-soluble protein (SSP) isolated from water-boiled pork meatballs were investigated. We found 1.0% KGM, 0.5% XG, 0.5-2.0% GG, and 0.5-2.0% KC to water-boiled pork meatballs exerted a positive effect on the denaturation temperature, hydrogen bonds, hydrophobic interactions, disulfide bonds, α-helix, and β-sheet content of SSP, as well as the strength and storage modulus of the modified protein gel. The addition of these hydrocolloids with the addition of 1.0% aggregated myosin and actin, led to the enhancement of the bands corresponding to myosin heavy chain and actin. The prediction model of gel strength showed that the gel strength was negatively correlated with Tpeak1, Tpeak2, and ionic bond. This study provides theoretical guidance for improving the application of hydrocolloids in pork-based foods.

Cryoprotective Effect of NADES on Frozen-Thawed Mirror Carp Surimi in Terms of Oxidative Denaturation, Structural Properties, and Thermal Stability of Myofibrillar Proteins

Quality degradation due to the formation and growth of ice crystals caused by temperature fluctuations during storage, transportation, or retailing is a common problem in frozen surimi. While commercial antifreeze is used as an ingredient in frozen surimi, its high sweetness does not meet the contemporary consumer demand for low sugar and low calories. Therefore, the development of new green antifreeze agents to achieve an enhanced frozen-thawed stability of surimi has received more attention. The aim of this study was to develop a cryoprotectant (a mixture of citric acid and trehalose) to enhance the frozen-thawed stability of surimi by inhibiting the oxidative denaturation and structural changes of frozen-thawed mirror carp (Cyprinus carpio L.) surimi myofibrillar protein (MP). The results showed that the amounts of free amine, sulfhydryl, α-helix, intrinsic fluorescence intensity, and thermal stability in the control significantly decreased after five F-T cycles, while the Schiff base fluorescence intensity, amounts of disulfide bonds and surface hydrophobicity significantly increased (p < 0.05). Compared to sucrose + sorbitol (SS), the natural deep eutectic solvents (NADES) effectively inhibited protein oxidation. After five F-T cycles, the α-helix content and Ca2+-ATPase activity of the NADES samples were 4.32% and 80.0%, respectively, higher, and the carbonyl content was 17.4% lower than those of the control. These observations indicate that NADES could inhibit oxidative denaturation and enhance the structural stability of MP.

Protein-Stabilized Emulsion Gels with Improved Emulsifying and Gelling Properties for the Delivery of Bioactive Ingredients: A Review

In today's food industry, the potential of bioactive compounds in preventing many chronic diseases has garnered significant attention. Many delivery systems have been developed to encapsulate these unstable bioactive compounds. Emulsion gels, as colloidal soft-solid materials, with their unique three-dimensional network structure and strong mechanical properties, are believed to provide excellent protection for bioactive substances. In the context of constructing carriers for bioactive materials, proteins are frequently employed as emulsifiers or gelling agents in emulsions or protein gels. However, in emulsion gels, when protein is used as an emulsifier to stabilize the oil/water interface, the gelling properties of proteins can also have a great influence on the functionality of the emulsion gels. Therefore, this paper aims to focus on the role of proteins' emulsifying and gelling properties in emulsion gels, providing a comprehensive review of the formation and modification of protein-based emulsion gels to build high-quality emulsion gel systems, thereby improving the stability and bioavailability of embedded bioactive substances.

Monosaccharide-induced glycation enhances gelation and physicochemical properties of myofibrillar protein from oyster (Crassostrea gigas)

Glycation offers a promising potential to improve protein gelling properties in food industries. Therefore, the study was aimed to illustrate the effect of five monosaccharides (erythrose-aldotetrose, xylose-aldopentose, glucose-aldohexose, galactose-aldohexose, and fructose-ketohexose) with different carbon numbers and structure on the structure-gelling relationship of myofibrillar protein (MP) from oyster (Crassostrea gigas). Results showed that monosaccharides significantly increased the glycation degree of MP by increasing sulfhydryl content, forming stable tertiary conformation and decreasing surface hydrophobicity. Moreover, the gel properties of MP like gel strength, water holding capacity, water mobility were improved by alleviating aggregation including the increase of solubility and the decrease of particle sizes. Oyster MP glycated by glucose (aldohexose) possessed the optimal gel properties. Molecular docking simulation showed that hydrogen bonds and hydrocarbon bonds were the mainly non-covalent binding modes. The study will provide a theoretical basis for oyster protein glycation and expand its application on food gel.

Physicochemical and structural changes of myofibrillar proteins in muscle foods during thawing: Occurrence, consequences, evidence, and implications

Myofibrillar protein (MP) endows muscle foods with texture and important functional properties, such as water-holding capacity (WHC) and emulsifying and gel-forming abilities. However, thawing deteriorates the physicochemical and structural properties of MPs, significantly affecting the WHC, texture, flavor, and nutritional value of muscle foods. Thawing-induced physicochemical and structural changes in MPs need further investigation and consideration in the scientific development of muscle foods. In this study, we reviewed the literature for the thawing effects on the physicochemical and structural characters of MPs to identify potential associations between MPs and the quality of muscle-based foods. Physicochemical and structural changes of MPs in muscle foods occur because of physical changes during thawing and microenvironmental changes, including heat transfer and phase transformation, moisture activation and migration, microbial activation, and alterations in pH and ionic strength. These changes are not only essential inducements for changes in spatial conformation, surface hydrophobicity, solubility, Ca2+ -ATPase activity, intermolecular interaction, gel properties, and emulsifying properties of MPs but also factors causing MP oxidation, characterized by thiols, carbonyl compounds, free amino groups, dityrosine content, cross-linking, and MP aggregates. Additionally, the WHC, texture, flavor, and nutritional value of muscle foods are closely related to MPs. This review encourages additional work to explore the potential of tempering techniques, as well as the synergistic effects of traditional and innovative thawing technologies, in reducing the oxidation and denaturation of MPs and maintaining the quality of muscle foods.

Insights into Intramuscular Connective Tissue Associated with Wooden Breast Myopathy in Fast-Growing Broiler Chickens

Wooden breast myopathy (WBM) is a meat abnormality affecting pectoralis majors (PMs) of fast-growing broiler chickens. WBM-affected PMs exhibited varied meat qualities with increasing WBM severity. Normal PMs (NOR), mild WBM-affected PMs (MIL), moderate WBM-affected PMs (MOD), and severe WBM-affected PMs (SEV) were selected as raw materials. The structure and organization of connective tissue and fibrillar collagen were investigated through immersing with sodium hydroxide solution, Masson trichrome staining, and using an electron microscope. The mechanical strength of intramuscular connective tissue was analyzed via the shear force of samples treated with sodium hydroxide solution. The thermal property and secondary structure of connective tissue were analyzed by differential scanning calorimetry and Fourier transform infrared spectroscopy. The obtained connective tissue was dissolved in a sodium hydroxide solution for the evaluation of the physicochemical properties of proteins, including particle size, molecular weight, surface hydrophobicity, and intrinsic fluorescence. In particular, the particle size was measured using a zeta potential instrument. The molecular weight was analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis. The surface hydrophobicity and intrinsic fluorescence were measured by spectroscopy technology. Histologically, macrophage infiltration, myodegeneration and necrosis, regeneration, fibrous connective tissue, and thickened perimysial connective tissue were observed in WBM-affected PMs, especially SEV with fibrosis, including blood vessels. Compared with NOR, WBM led to increased average diameter of the collagen fibrils in perimysial (36.61 nm of NOR to 69.73 nm of SEV) and endomysial (34.19 nm of NOR to 56.93 nm of SEV) layers. A significant increase (p < 0.05) was observed in the mechanical strength (2.05 N to 5.55 N) of fresh PMs and the thermal transition temperature (onset temperature (T_O), 61.53 °C to 67.50 °C; maximum transition temperature (T_M), 66.46 °C to 70.18 °C; termination temperature (T_E), 77.20 °C to 80.88 °C) of connective tissue from NOR to SEV. Cooking decreased the mechanical strength, and MOD samples showed the highest mechanical strength (1.24 N, p < 0.05), followed by SEV (0.96 N), MIL (0.93 N), and NOR (0.72 N). For proteins in connective tissue, random coil (19.64% to 29.61%, p < 0.0001), particle size (p < 0.05), and surface hydrophobicity (p < 0.05) increased with the decrease in the α-helix (14.61% to 11.54%, p < 0.0001), β-sheet (45.71% to 32.80%, p < 0.0001), and intrinsic fluorescence of proteins from NOR to SEV. The molecular weights of intramuscular connective tissue proteins were in the ranges of >270 kDa, 180-270 kDa, 110-180 kDa, 95-100 kDa, and <15 kDa. Taken together, WBM resulted in thickened organization, tightly packed collagen fibrils, increased mechanical strength and thermal temperature, and increased particle size, surface hydrophobicity, and intrinsic fluorescence of proteins in connective tissue, as the WBM severity increased.

Effects of alternating electric field assisted freezing-thawing-aging sequence on longissimus dorsi muscle microstructure and protein characteristics

The current study investigates the influence of alternating electric field (AEF)-assisted freezing-thawing-aging sequence on the muscle microstructure and myofibrillar protein characteristics. Three treatments were used for longissimus dorsi (LD) muscle: only aging (OA), freezing-thawing-aging sequence (FA) and AEF-assisted freezing-thawing-aging sequence (EA). Compared with the FA and EA groups, the OA group showed considerably fewer cracks between muscle fibers and maintained the integrity of the Z-line as observed using scanning and transmission electron microscopy, respectively. Furthermore, the EA treatment effectively decreased myofibrillar fragmentation, myofibrillar protein aggregation, and protein oxidation, as shown by the myofibrillar fragmentation index, turbidity, and total sulfhydryl concentration. Analysis of surface hydrophobicity and the Fourier transform infrared, UV absorption, and fluorescence spectrums indicated that AEF minimized the alterations of protein secondary and tertiary structure alterations during aging after freezing.

Impacts of Industrial Modification on the Structure and Gel Features of Soy Protein Isolate and its Composite Gel with Myofibrillar Protein

Native soy protein isolate (N-SPI) has a low denaturation point and low solubility, limiting its industrial application. The influence of different industrial modification methods (heat (H), alkaline (A), glycosylation (G), and oxidation (O)) on the structure of SPI, the properties of the gel, and the gel properties of soy protein isolate (SPI) in myofibril protein (MP) was evaluated. The study found that four industrial modifications did not influence the subunit composition of SPI. However, the four industrial modifications altered SPI's secondary structure and disulfide bond conformation content. A-SPI exhibits the highest surface hydrophobicity and I_850/830 ratio but the lowest thermal stability. G-SPI exhibits the highest disulfide bond content and the best gel properties. Compared with MP gel, the addition of H-SPI, A-SPI, G-SPI, and O-SPI components significantly improved the properties of the gel. Additionally, MP-ASPI gel exhibits the best properties and microstructure. Overall, the four industrial modification effects may impact SPI's structure and gel properties in different ways. A-SPI could be a potential functionality-enhanced soy protein ingredient in comminuted meat products. The present study results will provide a theoretical basis for the industrialized production of SPI.

Characterization of the physiochemical properties, microstructure, and molecular interactions of a novel rice-pea protein gel

The application of rice and pea proteins in food production is limited due to their undesirable processing performance. The objective of this research was to develop a novel rice-pea protein gel using alkali-heat treatment. This gel had a higher solubility, stronger gel strength, better water retention capacity, and denser bilayer network. This is due to the alkali-heat induced modifications for the secondary structures of proteins (i.e., a decrease in the α-helix, and an increase in the β-sheets) and the interactions between protein molecules. The network structure of gel was more compact by adding 2% and 4% alkali-heat rice protein (AH-RP). This resulted in a stable double-layer network structure of gel. Adding 4% AH-RP significantly improved the hardness and elasticity of gel. This gel will have a good potential use for being the ingredient to produce the functional foods and meat analogs.

The effects of modified quinoa protein emulsion as fat substitutes in frankfurters

In the current study, the effects of replacing different proportions of pork back fat (0, 25, 50, 75, and 100%) with high-pressure homogenization-modified quinoa protein emulsions (HMQE) on the physicochemical, water distribution, and rheological properties of low-fat frankfurters were investigated. HMQE incorporation significantly increased the moisture, ash, protein content, pH and L^⁎ values and decreased the a^⁎ and b^⁎ values and T₂ relaxation time of the low-fat frankfurters (P < 0.05). Of note, 50% fat substitution by HMQE yielded higher WHC, textural properties, gel strength, immobilized water percentage and G' value of the frankfurters than others. HMQE incorporation changed the protein secondary structure from α-helix to β-sheet, forming a compact and uniform gel network structure with small cavities. Moreover, 50% fat substitution by HMQE did not affect sensory characteristics and improved the fat oxidative stability during storage. Therefore, the incorporation of HQME as a partial fat substitute resulted in nutritional benefits and quality enhancements, indicating that HQME could serve as a promising fat alternative in manufacturing low-fat frankfurters with desirable attributes.

Effects of ultrasound on the structural and functional properties of sheep bone collagen

The study evaluated the effect of an ultrasound-assisted treatment on the structural and functional properties of sheep bone collagen (SBC). The type and distribution of SBC were analyzed by proteome (shotgun) technology combined with liquid chromatography-tandem mass spectrometry. Compared with pepsin extraction, the ultrasound-assisted treatment significantly increased the collagen extraction rate by 17.4 pp (P < 0.05). The characteristic functional groups and structural integrity of collagen extracted by both methods were determined via Fourier transform infrared spectroscopy, ultraviolet absorption spectroscopy, and fluorescence spectroscopy. Circular dichroism spectra revealed that the ultrasound-assisted pretreatment reduced α-helix content by 1.6 pp, β-sheet content by 21.9 pp, and random coils content by 28.4 pp, whereas it increased β-turn content by 51.9 pp (P < 0.05), compared with pepsin extraction. Moreover, ultrasound-assisted treatment collagen had superior functional properties (e.g., solubility, water absorption, and oil absorption capacity) and foaming and emulsion properties, compared with pepsin extraction. Furthermore, the relative content of type I collagen in ultrasound-assisted extracted SBC was highest at 79.66%; only small proportions of type II, VI, X, and XI collagen were present. Peptide activity analysis showed that SBC had potential antioxidant activity, dipeptidyl peptidase 4 inhibitory activity, and angiotensin-converting enzyme inhibitory activity; it also had anticancer, antihypertensive, anti-inflammatory, and immunomodulatory effects.

Contribution of process-induced molten-globule state formation in duck liver protein to the enhanced binding ability of (E,E)-2,4-heptadienal

BACKGROUND

Extracted proteins of alternative animal origin tend to present strong off-flavor perception due to physicochemical interactions of coextracted off-flavor compounds with proteins. To investigate the relationship between absorption behaviors of volatile aromas and the processes-induced variations in protein microstructures and molecular conformations, duck liver protein isolate (DLp) was subjected to heating (65/100 °C, 15 min) and ultra-high pressure (UHP, 100-500 MPa/10 min, 28 °C) treatments to obtain differential unfolded protein states.

RESULTS

Heat and UHP treatments induced the unfolding of DLp to varied degrees, as revealed by fluorescence spectroscopy, ultraviolet-visible absorption, circular dichroism spectra and surface hydrophobicity measurements. Two types of heating-denatured states with varied unfolding degrees were obtained, while UHP at both levels of 100/500 MPa caused partial unfolding of DLp and the presence of a molten-globule state, which significantly enhanced the binding affinity between DLp and (E,E)-2,4-heptadienal. In particular, significantly modified secondary structures of DLp were observed in heating-denatured samples. Excessive denaturing and unfolding degrees resulted in no significant changes in the absorption behavior of the volatile ligand, as characterized by observations of fluorescence quenching and analysis of headspace concentrations.

CONCLUSION

Defining process-induced conformational transition behavior of matrix proteins could be a promising strategy to regulate food flavor attributes and, particularly, to produce DLp coextracted with limited off-flavor components by modifying their interaction during extraction processes. © 2023 Society of Chemical Industry.

Increasing the pressure during high pressure homogenization regulates the starch digestion of the resulting pea starch-gallic acid complexes

The pea starch-gallic acid (PS-GA) complexes were prepared using high pressure homogenization (HPH), then the effect and underlying mechanism of pressure on multi-scale structure and digestibility of complexes were investigated. Results showed that HPH promoted the formation of PS-GA complexes, reaching the maximum complex index of 7.74 % at the pressure of 90 MPa, and the main driving force were hydrophobic interactions and hydrogen bonding. The interaction between PS and GA facilitated the formation of surface reticular structures to encapsulate gallic acid molecules, further entangled into bigger size aggregates. The enhancement of rearrangement and aggregation of starch chains during HPH developed a dense hierarchical structure of PS-GA complexes, including short-range ordered structure, V-type crystal structure, lamellar and fractal structure, thus increasing gelatinization temperature. The digestibility of PS-GA complexes substantially changed in reducing rapidly digestible starch content from 29.67 % to 17.07 %, increasing slowly digestible starch from 53.69 % to 56.25 % and resistant starch from 16.63 % to 26.67 %, respectively. Moreover, the resulting complexes exhibited slower digestion rates compared with native PS. Furthermore, the regulating mechanism of pressure during HPH on starch digestibility was the formation of ordered multi-scale structure and inhibition of GA on digestive enzymes.

Ultrasound-assisted phosphorylation of goose myofibrillar proteins: improving protein structure and functional properties

BACKGROUND

Goose meat is rough and embedded with dense connective tissue, impairing protein solubility. Therefore, to improve the functional properties of goose myofibrillar protein (GMP), ultrasound was used to assist the phosphorylation of GMP.

RESULTS

The fact that GMP attached covalently with the phosphate group of sodium tripolyphosphate (GMP-STP) was disclosed directly by Fourier transform infrared spectroscopy. Furthermore, ultrasound significantly improved the hydrophobicity and solubility of GMP-STP, which could be attributed to the conversion of α-helix to β-sheet, β-turns, and random coils by sonication. The spatial stabilization of the protein phosphorylation process was boosted by ultrasound, making the droplets more dispersed, and thus an improvement in the functional properties of GMP-STP was observed. Water-holding capacity, oil-binding capacity, and emulsifying and foaming properties were best at an ultrasound power of 400 W.

CONCLUSION

Ultrasound-assisted phosphorylation has great potential to modulate the structure-function relationship of proteins. © 2023 Society of Chemical Industry.

A review of oil and water retention in emulsified meat products: The mechanisms of gelation and emulsification, the application of multi-layer hydrogels

Emulsified meat products are key deep-processing products due to unique flavor and high nutritional value. Myosin dissolves, and protein aggregation and heat-induced gelation occur after myosin unfolds and hydrophobic groups are exposed. Myosin could form interfacial protein membranes and wrap fat globules. Emulsified fat globules may be filled in heat-induced gel networks. Therefore, this review intends to discuss the influences of heat-induced gelation and interfacial adsorption behavior on oil and water retention. Firstly, the mechanism of heat-induced gelation was clarified from the perspective of protein conformation and micro-structure. Secondly, the mechanism of emulsification stability and its factors affecting interfacial adsorption were demonstrated as well as limitations and challenges. Finally, the structure characteristics and application of multi-layer hydrogels in the gelation and emulsification were clarified. It could conclude that the characteristic morphology, spatial conformation and structure adjustment affected heat-induced gelation and interfacial adsorption behavior. Spatial conformation and microstructure were adjusted to improve the oil and water retention by pH, ionic strength, amino acid, oil phase characteristic and protein interaction. Multi-layer hydrogels facilitated oil and water retention. The comprehensive review of gelation and emulsification mechanisms could promote the development of meat products and improvement of meat processing technology.

Insights into peptide profiling of sturgeon myofibrillar proteins with low temperature vacuum heating

BACKGROUND

Protein oxidation during food processing causes changes in the balance of protein-molecular interactions and protein-water interactions, ultimately leading to protein denaturation, which results in the loss of a range of functional properties. Therefore, how to control the oxidative modification of proteins during processing has been the focus of research.

RESULTS

In the present study, the intrinsic fluorescence value of the myofibrillar proteins (MP) decreased and the surface hydrophobicity value increased, indicating that the heat treatment caused a significant change in the conformation of the MP. With an increase in heating temperature, protein carbonyl content increased, total sulfhydryl content decreased, and protein secondary structure changed from α-helix to β-sheet, indicating that protein oxidation and aggregation occurred. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis revealed that heat treatment can lead to the degradation of proteins, especially myosin heavy chain, although actin had a certain thermal stability. In total, 733 proteins were identified by proteomics, and the protein oxidation caused by low temperature vacuum heating (LTVH) was determined to be mild oxidation dominated by malondialdehyde and 4-hydroxynonenal by oxidation site division.

CONCLUSION

The present study has revealed the effect of LTVH treatment on the protein oxidation modification behavior of sturgeon meat, and explored the effect mechanism of LTVH treatment on the processing quality of sturgeon meat from the perspective of protein oxidation. The results may provide a theoretical basis for the precise processing of aquatic products. © 2023 Society of Chemical Industry.

The red, firm, non-exudative and pale, soft, exudative pork have different in vitro digestive properties of protein

Pale, soft and exudative (PSE) meat has worse edible quality than red, firm and non-exudative (RFN) meat, but their difference in nutritional values is still unclear. In this study, the differences in digestive properties between PSE and RFN pork were explored, and the potential mechanisms were analyzed in terms of protein conformation. The PSE pork showed significantly higher digestibility and smaller particle size compared with RFN pork (P < 0.05) after gastrointestinal digestion. Mechanistically, the lower viscosity was seen in the PSE pork digestion system. The protein structure of PSE pork was disordered with weaker hydrogen bond and ionic bond before and after heating. In addition, the protein (mainly salt-soluble protein) of PSE pork was highly oxidized. The results suggested that higher level of oxidation in PSE pork leads to the destruction of the molecular forces, resulting in the impaired protein conformation and disordered protein structure. The serial changes caused the meat proteins more accessible to digestive enzymes, thus improving the digestibility. The findings provide new insights into the evaluating the quality of PSE meat.

Effects of Ultra-High-Pressure Jet Processing on Casein Structure and Curdling Properties of Skimmed Bovine Milk

Ultra-high-pressure jet processing (UHPJ) is a new non-thermal processing technique that can be employed for the homogenization and the sterilization of dairy products. However, the effects on dairy products are unknown when using UHPJ for homogenization and sterilization. Thus, this study aimed to investigate the effects of UHPJ on the sensory and curdling properties of skimmed milk and the casein structure in skimmed milk. Skimmed bovine milk was treated with UHPJ using different pressures (100, 150, 200, 250, 300 MPa) and casein was extracted by isoelectric precipitation. Subsequently, the average particle size, Zeta potential, contents of free sulfhydryl and disulfide bonds, secondary structure, and surface micromorphology were all used as evaluation indicators to explore the effects of UHPJ on the structure of casein. The results showed that with an increase of pressure, the free sulfhydryl group content changed irregularly, while the disulfide bond content increased from 1.085 to 3.0944 μmol/g. The content of α-helix and random coil in the casein decreased, while the β-sheet content increased at 100, 150, 200 MPa pressure. However, treatment with higher pressures of 250 and 300 MPa had the opposite effect. The average particle size of the casein micelles first decreased to 167.47 nm and then increased up to 174.63 nm; the absolute value of Zeta potential decreased from 28.33 to 23.77 mV. Scanning electron microscopy analysis revealed that the casein micelles had fractured into flat, loose, porous structures under pressure instead of into large clusters. After being ultra-high-pressure jet-processed, the sensory properties of skimmed milk and its fermented curd were analyzed concurrently. The results demonstrated that UHPJ could alter the viscosity and color of skimmed milk, shortening curdling time from 4.5 h to 2.67 h, and that the texture of the curd fermented with this skimmed milk could be improved to varying degrees by changing the structure of casein. Thus, UHPJ has a promising application in the manufacture of fermented milk due to its ability to enhance the curdling efficiency of skimmed milk and improve the texture of fermented milk.

Understanding interactions among flavor compounds from spices and myofibrillar proteins by multi-spectroscopy and molecular docking simulation

Influence of the constant heating treatment on structural and adsorption properties of myofibrillar proteins (MPs) of chicken was investigated. The results showed that heat treatment enhanced the exposure of sulfhydryl groups and improved hydrophobicity of MPs surface. Particle size distribution of MPs significantly varied depending on heat treatment duration. Also, heat treatments resulted in significant changes in the α-helix and β-sheet structures of MPs. Besides, the MPs formed larger, irregular, and cluster-like aggregates after heat treatments. Moreover, heat treatments increased viscosity and surface roughness of MPs, while zeta potential value was reduced after heat treatments. Furhthermore, binding interactions between the MPs and spices flavors signifcanlty varied relying on nature of MPs and flavor compounds, as well as heat treatments duration. Amino acid residues were interacted with flavor compounds of spices via a variety of bonds and a stable MPs-flavors complex was performed. The obtained results provide a basis for understanding structural and physicochemical changes that occur in MPs during cooking and the interactions between MPs and flavors of spices.

Enhanced Gel Properties of Duck Myofibrillar Protein by Plasma-Activated Water: Through Mild Structure Modifications

This study assessed the gel properties and conformational changes of duck myofibrillar protein (DMP) affected by plasma-activated water (PAW) generated at various discharge times (0 s, 10 s, 20 s, 30 s, and 40 s). With the treatment of PAW-20 s, the gel strength and water-holding capacity (WHC) of DMP gels were significantly increased when compared to the control group. Throughout the heating process, dynamic rheology revealed that the PAW-treated DMP had a higher storage modulus than the control. The hydrophobic interactions between protein molecules were significantly improved by PAW, resulting in a more ordered and homogeneous gel microstructure. The increased sulfhydryl and carbonyl content in DMP indicated a higher degree of protein oxidation with PAW treatment. Additionally, the circular dichroism spectroscopy demonstrated that PAW induced α-helix and β-turn transformed to β-sheet in DMP. Surface hydrophobicity, fluorescence spectroscopy, and UV absorption spectroscopy suggested that PAW altered DMP's tertiary structure, although the electrophoretic pattern indicated that the primary structure of DMP was mostly unaffected. These results suggest that PAW can improve the gel properties of DMP through mild alteration in its conformation.

Effect of hydrocolloids on gluten proteins, dough, and flour products: A review

Hydrocolloids are among the most common components in the food industry, which are used for thickening, gel formation, emulsification, and stabilization. Previous studies have also found that hydrocolloids can affect the structures and properties of gluten proteins, dough, and flour products. In this review, hydrocolloids were separated into three categories: anionic, nonionic, and other hydrocolloids, and reviewed the effects of common hydrocolloids on gluten proteins, dough, and flour products. Hydrocolloids can affect the structures and properties of gluten proteins through gluten-hydrocolloids interaction, secondary structures, disulfide bonds, environment of aromatic amino acids, and chemical bonds. The properties of dough are affected by rheological, fermentation, and thermomechanical properties. Hydrocolloids are widely used in bread, Chinese steamed bread, noodles, yellow layer cake, and so on, which mainly affect their appearance, texture, and aging speed. This comprehensive review provides a scientific guide for the development and utilization of hydrocolloids and their applications in flour products, and provides a theoretical basis for improving the processing characteristics of products.

Influence of repeated freeze-thaw treatments on the oxidation and degradation of muscle proteins from mirror carp (Cyprinus carpio L.), based on myofibrillar protein structural changes

The effects of repeated freeze-thaw (F-T) treatments on the oxidation and degradation of muscle proteins from mirror carp (Cyprinus carpio L.) were investigated. The myofibrillar fragmentation index, trichloroacetic acid-soluble peptides, total volatile basic nitrogen, amino nitrogen, and carbonyl content of the samples significantly increased (P < 0.05). However, the samples showed a significant reduction in the fragmentation index, myofibrillar protein (MP) solubility, and total sulfhydryl content after five F-T cycles (P < 0.05). Moreover, the sodium dodecyl sulfate-polyacrylamide gel electrophoresis bands of the MP faded because of the oxidation and degradation of the protein with increasing F-T cycles. By the fifth F-T cycle, the α-helix and β-turn content significantly decreased by 10.41 % and 5.72 %, respectively (P < 0.05), whereas the β-sheet and random coil content significantly rose by 7.66 % and 8.47 %, respectively (P < 0.05). Furthermore, the intrinsic fluorescence of the MP showed a substantial decrease in intensity and a redshift. In summary, iterative F-T cycles destroyed the MP structure and caused the oxidation and degradation of muscle proteins from mirror carp.

Characterization of sonicated gluten protein and subsequent rheological properties of model dough and noodles

BACKGROUND

The present study aimed to investigate the effects of the thermo-mechanical and rheological properties of a wheat gluten-sonicated model dough and noodles, as well as the effects of ultrasonic frequency (20, 28, 40, 68 and 80 kHz) on the functional properties and structural features of gluten.

RESULTS

Water absorption, stability and developmental time, and viscoelastic behavior of gluten-sonicated model dough were all found to be improved. Water absorption, tensile resistance and stretching distance of noodles increased markedly, whereas cooking loss decreased. Ultrasonication at different frequencies also significantly affected gluten structure, including its surface hydrophobicity, micro-network structure, and secondary and tertiary structures. These alterations then caused changes in its functional characteristics. Compared to untreated gluten, sonicated gluten exhibited significantly increased oil and water capacities (8.75-15.26% and 100.65-127.71% higher than the untreated gluten, respectively), foaming and emulsifying properties, and increased solubility (63.46-98.83% higher than control). In addition, these findings indicated that 40 kHz was the likely resonance frequency of the cavitation bubble in the gluten solution. However, sodium dodecyl sulfate-polyacrylamide gel electrophoresis electropherograms revealed that such treatments did not affect the molecular weight of gluten, which was also consistent with its unchanged disulfide bond content.

CONCLUSION

The present study clarified the impact of frequency on the properties of gluten and model dough. The best frequency for modification of gluten was 40 kHz. Collectively, these findings suggest that ultrasonic technology has the potential for use in modifying wheat gluten and commercial noodle processing. © 2022 Society of Chemical Industry.

Effects of hydrodynamic cavitation on physicochemical structure and emulsifying properties of tilapia (Oreochromis niloticus) myofibrillar protein

The purpose of this research was to explore the different hydrodynamic cavitation (HC) times (0, 5, 10, 15, 20 min; power 550 W, pressure 0.14 MPa) on the emulsifying properties of tilapia myofibrillar protein (TMP). Results of pH, particle size, turbidity, solubility, surface hydrophobicity, and reactive sulfhydryl (SH) group indicated that HC changed the structure of TMP, as confirmed by the findings of intrinsic fluorescence and circular dichroism (CD) spectra. Furthermore, HC increased the emulsifying activity index (EAI) significantly (P < 0.05) and changed the emulsifying stability index (ESI), droplet size, and rheology of TMP emulsions. Notably, compared with control group, the 10-min HC significantly decreased particle size and turbidity but increased solubility (P < 0.05), resulting in accelerated diffusion of TMP in the emulsion. The prepared TMP emulsion showed the highest ESI (from 71.28 ± 5.50 to 91.73 ± 5.56 min), the smallest droplet size (from 2,754 ± 110 to 2,138 ± 182 nm) and the best rheological properties, as demonstrated by the microstructure photographs. Overall, by showing the effect of HC in improving the emulsifying properties of TMP, the study demonstrated HC as a potential technique for meat protein processing.

The degree of doneness affected molecular changes and protein digestibility of pork

The degree of doneness has been shown to have a great impact on eating quality of meat, however, it is little known whether it affects protein digestibility of meat. In this study, we explored molecular changes and protein digestibility of pork under different degree of doneness. Pork chops were cooked in a 100°C water bath for about 26 min and a gradient decrease in doneness was obtained from outer to inner layers of samples. Compared with the raw samples, the cooked samples' active and total sulfhydryl contents, surface hydrophobicity, and turbidity increased but its solubility decreased. The inner layers with lower doneness contained higher α-helix, and fluorescence intensities of tryptophan and tyrosine residues than the outer layers with higher doneness. The pepsin and pancreatin digestibility of meat proteins in the inner layers were higher than those of the outer layers. Molecular simulation analysis showed that the most abundant protein in pork, i.e., myosin in the outer layers were more stable with an increased number of hydrogen bonds, making it difficult to be digested. These findings provided a new insight into the heterogeneity of meat nutritional quality due to the existence of doneness gradient.

Improvement of structural, physicochemical, and rheological properties of porcine myofibrillar proteins by high-intensity ultrasound treatment for application as Pickering stabilizers

This study aimed to evaluate the potential of time-dependent (0, 15, 30, 60, 120 min) treatment of porcine-derived myofibrillar proteins (MPs) with high-intensity ultrasound (HIU) for utilizing them as a Pickering stabilizer and decipher the underlying mechanism by which HIU treatment increases the emulsification and dispersion stability of MPs. To accomplish this, we analyzed the structural, physicochemical, and rheological properties of the HIU-treated MPs. Myosin heavy chain and actin were observed to be denatured, and the particle size of MPs decreased from 3,342.7 nm for the control group to 153.9 nm for 120 min HIU-treated MPs. Fourier-transformed infrared spectroscopy and circular dichroism spectroscopy confirmed that as the HIU treatment time increased, α-helical content increased, and β-sheet decreased, indicating that the protein secondary/tertiary structure was modified. In addition, the turbidity, apparent viscosity, and viscoelastic properties of the HIU-treated MP solution were decreased compared to the control, while the surface hydrophobicity was significantly increased. Analyses of the emulsification properties of the Pickering emulsions prepared using time-dependent HIU-treated MPs revealed that the emulsion activity index and emulsion stability index of HIU-treated MP were improved. Confocal laser scanning microscopy images indicated that small spherical droplets adsorbed with MPs were formed by HIU treatment and that dispersion stabilities were improved because the Turbiscan stability index of the HIU-treated group was lower than that of the control group. These findings could be used as supporting data for the utilizing porcine-derived MPs, which have been treated with HIU for appropriate time periods, as Pickering stabilizers.

Modulating the structure of lamb myofibrillar protein gel influenced by psyllium husk powder at different NaCl concentrations: Effect of intermolecular interactions

In this study, a strategy involving psyllium husk powder (PHP) was proposed to alleviate the textural deterioration of protein gels under low-sodium conditions. Results revealed that myofibrillar protein (MP) in 0.3 M NaCl could accommodate more PHP to achieve better gels properties compared with that of 0.6 M NaCl. The 3 % addition of PHP could lessen the textural deterioration of gels at 0.3 M NaCl because of the insertion of PHP into the hydrophobic cavity of MP. Consequently, the reduction in protein viscoelasticity and the thermal stability of the head and tail of myosin improved. α-Helix structures unfolded, intermolecular forces formed, and proteins aggregated. Molecular docking predicted hydrogen bonds and hydrophobic interactions as the main forces to stabilize the conformation of composites. Experiments further verified that hydrophobic interactions and disulfide bonds were the main forces that stabilized the structure of MP-PHP composite gels.

Changes in Gel Characteristics, Rheological Properties, and Water Migration of PSE Meat Myofibrillar Proteins with Different Amounts of Sodium Bicarbonate

The changes in the gel and rheological properties and water-holding capacity of PSE meat myofibrillar proteins with different amounts of sodium bicarbonate (SC, 0−0.6/100 g) were studied. Compared to the PSE meat myofibrillar proteins with 0/100 g SC, the texture properties and cooking yield significantly increased (p < 0.05) with increasing SC; meanwhile, adding SC caused the gel color to darken. All samples had similar curves with three phases, and the storage modulus (G’) values significantly increased with the increasing SC. The thermal stability of the PSE meat myofibrillar proteins was enhanced, and the G’ value at 80 °C increased with the increasing SC. Because water was bound more tightly to the protein matrix, the initial relaxation times of T21 and T22 shortened, the peak ratio of P21 significantly increased (p < 0.05), and the P22 significantly decreased (p < 0.05), which implied that the mobility of the water was reduced. Overall, SC could improve the thermal stability of the PSE meat myofibrillar proteins and increase the water-holding capacity and textural properties of the cooked PSE meat myofibrillar protein gels.

Interaction mechanism between cereal phenolic acids and gluten protein: protein structural changes and binding mode

BACKGROUND

Phenolic acids are antioxidant nutrients in cereals and affect the quality of wheat products and the properties of gluten protein. Gallic acid (GA), caffeic acid (CA), syringic acid (SA), and p-coumaric acid (p-CA) were selected to study the interaction mechanism between cereal phenolic acids and gluten protein.

RESULTS

The results showed that adding GA significantly (P < 0.05) decreased the content of free sulfhydryl in gluten proteins by 70-87.26% compared with the control group. The aggregates' behavior of gluten protein induced by adding the phenolic acids would produce oversized particles (>5000 nm). Adding the selected phenolic acids changed the hydrogen-bond linkage of protein secondary structure. Zeta potential values of gluten protein increased significantly (P < 0.05) by 14.41%, 26.49%, 30.77%, and 57.93% for CA, p-CA, GA, and SA respectively added at 0.03 g kg^-1 . Moreover, the gluten protein surface hydrophobicity increased when the phenolic acids were added at 0.03 g kg^-1 , displaying the effect of the phenolic acid on the hydrophobic interaction of protein. Molecular docking results showed that the selected phenolic acids could interact with glutenin and gliadin using hydrogen-bond formation, and SA had the strongest binding with glutenin and gliadin.

CONCLUSION

The results demonstrated that the selected phenolic acids could interact with gluten protein via covalent cross-linking as well as by hydrogen bonding, thereby changing the structure of the gluten protein. This exploration is expected to provide theoretical support for the development and utilization of whole-grain foods. © 2022 Society of Chemical Industry.