Chromium-Induced High Covalent Co-O Bonds for Efficient Anodic Catalysts in PEM Electrolyzer

The proton exchange membrane water electrolyzer (PEMWE), crucial for green hydrogen production, is challenged by the scarcity and high cost of iridium-based materials. Cobalt oxides, as ideal electrocatalysts for oxygen evolution reaction (OER), have not been extensively applied in PEMWE, due to extremely high voltage and poor stability at large current density, caused by complicated structural variations of cobalt compounds during the OER process. Thus, the authors sought to introduce chromium into a cobalt spinel (Co3O4) catalyst to regulate the electronic structure of cobalt, exhibiting a higher oxidation state and increased Co-O covalency with a stable structure. In-depth operando characterizations and theoretical calculations revealed that the activated Co-O covalency and adaptable redox behavior are crucial for facilitating its OER activity. Both turnover frequency and mass activity of Cr-doped Co3O4 (CoCr) at 1.67 V (vs RHE) increased by over eight times than those of as-synthesized Co3O4. The obtained CoCr catalyst achieved 1500 mA cm-2 at 2.17 V and exhibited notable durability over extended operation periods - over 100 h at 500 mA cm-2 and 500 h at 100 mA cm-2, demonstrating promising application in the PEMWE industry.

Genome-wide analysis of in vivo-evolved Candida auris reveals multidrug-resistance mechanisms

Candida auris, an emerging and multidrug-resistant fungal pathogen, has led to numerous outbreaks in China. While the resistance mechanisms against azole and amphotericin B have been studied, the development of drug resistance in this pathogen remains poorly understood, particularly in in vivo-generated drug-resistant strains. This study employed pathogen whole-genome sequencing to investigate the epidemiology and drug-resistance mutations of C. auris using 16 strains isolated from two patients. Identification was conducted through Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, and antimicrobial susceptibilities were assessed using broth microdilution and Sensititre YeastOne YO10. Whole-genome sequencing revealed that all isolates belonged to the South Asian lineage, displaying genetic heterogeneity. Despite low genetic variability among patient isolates, notable mutations were identified, including Y132F in ERG11 and A585S in TAC1b, likely linked to increased fluconazole resistance. Strains from patient B also carried F214L in TAC1b, resulting in a consistent voriconazole minimum inhibitory concentration of 4 µg/mL across all isolates. Furthermore, a novel frameshift mutation in the SNG1 gene was observed in amphotericin B-resistant isolates compared to susceptible ones. Our findings suggest the potential transmission of C. auris and emphasize the need to explore variations related to antifungal resistance. This involves analyzing genomic mutations and karyotypes, especially in vivo, to compare sensitive and resistant strains. Further monitoring and validation efforts are crucial for a comprehensive understanding of the mechanisms of drug resistance in C. auris.

Kinetics Controlled Perovskite Crystallization for High Performance Solar Cells

The power conversion efficiencies (PCEs) of perovskite solar cells have recently developed rapidly compared to crystalline silicon solar cells. To have an effective way to control the crystallization of perovskite thin films is the key for achieving good device performance. However, a paradox in perovskite crystallization is from the mismatch between nucleation and Oswald ripening. Usually, the large numbers of nucleation sites tend to weak Oswald ripening. Here, we proposed a new mechanism to promote the formation of nucleation sites by reducing surface energy from 44.9 mN/m to 36.1 mN/m, to spontaneously accelerate the later Oswald ripening process by improving the grain solubility through the elastic modulus regulation. The ripening rate is increased from 2.37 Åm ⋅ s-1 to 4.61 Åm ⋅ s-1 during annealing. Finally, the solar cells derived from the optimized films showed significantly improved PCE from 23.14 % to 25.32 %. The long-term stability tests show excellent thermal stability (the optimized device without encapsulation maintaining 82 % of its initial PCE after 800 h aging at 85 °C) and an improved light stability under illumination. This work provides a new method, the elastic modulus regulation, to enhance the ripening process.

Effects of long-term different-scale rice-duck farming on the growth and yield of paddy rice

BACKGROUND

To maintain rice production and increase revenue, rice-duck (RD) farming is a contemporary ecological cycle technology that has been widely used in Asia. However, due to the clustering activity of duck flocks, the consequences of long-term RD farming on rice growth at different scales are still unknown. Here, we studied RD farming using several different treatments (CK: conventional rice farming; RD1: 667 m2 ; RD2: 2000 m2 ; and RD3: 3333 m2 ).

RESULTS

The results demonstrated that the maximum tillers, effective spikes, dry matter accumulation, and lodging index of rice under RD farming were significantly decreased by 17.9%, 9.8%, 14.8%, and 17.8%, respectively, which ultimately caused a significant decrease in yield of 10.6%. However, RD farming significantly increased root oxidation activity and the ear-bearing tiller rate of rice by 25.5% and 11.1%, respectively, and improved yield stability. For different scales of RD farming, the lodging resistance index of RD1 was significantly lower than that of RD2 and RD3 by 10.0% and 15.2%, respectively, whereas the root oxidation activity and dry matter accumulation of RD2 were significantly higher than those of RD1 and RD3 by 11.1%, 4.7%, 8.6%, and 5.1%, respectively. For rice yield, there was no significant difference among the different scales.

CONCLUSION

This long-term experiment helped elucidate the complicated effects of RD farming at different scales on the growth and yield of rice. It is also critical to consider the economic advantages of different scales of RD farming to assess the impact of this system more thoroughly. © 2023 Society of Chemical Industry.

Large-Scale Proteome Profiling Identifies Biomarkers Associated with Suspected Neurosyphilis Diagnosis

Neurosyphilis (NS) is a central nervous system (CNS) infection caused by Treponema pallidum (T. pallidum). NS can occur at any stage of syphilis and manifests as a broad spectrum of clinical symptoms. Often referred to as "the great imitator," NS can be easily overlooked or misdiagnosed due to the absence of standard diagnostic tests, potentially leading to severe and irreversible organ dysfunction. In this study, proteomic and machine learning model techniques are used to characterize 223 cerebrospinal fluid (CSF) samples to identify diagnostic markers of NS and provide insights into the underlying mechanisms of the associated inflammatory responses. Three biomarkers (SEMA7A, SERPINA3, and ITIH4) are validated as contributors to NS diagnosis through multicenter verification of an additional 115 CSF samples. We anticipate that the identified biomarkers will become effective tools for assisting in diagnosis of NS. Our insights into NS pathogenesis in brain tissue may inform therapeutic strategies and drug discoveries for NS patients.

Combined Study of Gene Expression and Chromosome Three-Dimensional Structure in Escherichia coli During Growth Process

The chromosome structure of different bacteria has its unique organization pattern, which plays an important role in maintaining the spatial location relationship between genes and regulating gene expression. Conversely, transcription also plays a global role in regulating the three-dimensional structure of bacterial chromosomes. Therefore, we combine RNA-Seq and Hi-C technology to explore the relationship between chromosome structure changes and transcriptional regulation in E. coli at different growth stages. Transcriptome analysis indicates that E. coli synthesizes many ribosomes and peptidoglycan in the exponential phase. In contrast, E. coli undergoes more transcriptional regulation and catabolism during the stationary phase, reflecting its adaptability to changes in environmental conditions during growth. Analyzing the Hi-C data shows that E. coli has a higher frequency of global chromosomal interaction in the exponential phase and more defined chromosomal interaction domains (CIDs). Still, the long-distance interactions at the replication termination region are lower than in the stationary phase. Combining transcriptome and Hi-C data analysis, we conclude that highly expressed genes are more likely to be distributed in CID boundary regions during the exponential phase. At the same time, most high-expression genes distributed in the CID boundary regions are ribosomal gene clusters, forming clearer CID boundaries during the exponential phase. The three-dimensional structure of chromosome and expression pattern is altered during the growth of E. coli from the exponential phase to the stationary phase, clarifying the synergy between the two regulatory aspects.

Characteristics, treatments, in-hospital and long-term outcomes among inpatients with acute exacerbation of chronic obstructive pulmonary disease in China: sex differences in a large cohort study

BACKGROUND

Data related to the characteristics, treatments and clinical outcomes of acute exacerbation of chronic obstructive pulmonary disease (AECOPD) patients in China are limited, and sex differences are still a neglected topic.

METHODS

The patients hospitalized for AECOPD were prospectively enrolled from ten medical centers in China between September 2017 and July 2021. Patients from some centers received follow-up for 3 years. Data regarding the characteristics, treatments and in-hospital and long-term clinical outcomes from male and female AECOPD patients included in the cohort were analyzed and compared.

RESULTS

In total, 14,007 patients with AECOPD were included in the study, and 11,020 (78.7%) were males. Compared with males, female patients were older (74.02 ± 10.79 vs. 71.86 ± 10.23 years, P < 0.001), and had more comorbidities (2.22 ± 1.64 vs. 1.73 ± 1.56, P < 0.001), a higher frequency of altered mental status (5.0% vs. 2.9%, P < 0.001), lower diastolic blood pressure (78.04 ± 12.96 vs. 79.04 ± 12.47 mmHg, P < 0.001). In addition, there were also significant sex differences in a range of laboratory and radiographic findings. Females were more likely to receive antibiotics, high levels of respiratory support and ICU admission than males. The in-hospital and 3-year mortality were not significantly different between males and females (1.4% vs. 1.5%, P = 0.711; 35.3% vs. 31.4%, P = 0.058), while female smokers with AECOPD had higher in-hospital mortality than male smokers (3.3% vs. 1.2%, P = 0.002) and male smokers exhibited a trend toward higher 3-year mortality compared to female smokers (40.7% vs. 33.1%, P = 0.146).

CONCLUSIONS

In AECOPD inpatients, females and males had similar in-hospital and long-term survival despite some sex differences in clinical characteristics and treatments, but female smokers had significantly worse in-hospital outcomes than male smokers.

CLINICAL TRIAL REGISTRATION

Retrospectively registered, registration number is ChiCTR2100044625, date of registration 21/03/2021. URL: http://www.chictr.org.cn/showproj.aspx?proj=121626 .

Hydrophobic Hydrogen-Bonded Polymer Network for Efficient and Stable Perovskite/Si Tandem Solar Cells

The pursuit of highly efficient and stable wide-band gap (WBG) perovskite solar cells (PSCs), especially for monolithic perovskite/silicon tandem devices, is a key focus in achieving the commercialization of perovskite photovoltaics. In this study, we initially designed poly(ionic liquid)s (PILs) with varying alkyl chain lengths based on density functional theory calculations. Results pinpoint that PILs with longer alkyl chain lengths tend to exhibit more robust binding energy with the perovskite structure. Then we synthesized the PILs to craft a hydrophobic hydrogen-bonded polymer network (HHPN) that passivates the WBG perovskite/electron transport layer interface, inhibits ion migration and serves as a barrier layer against water and oxygen ingression. Accordingly, the HHPN effectively curbs nonradiative recombination losses while facilitating efficient carrier transport, resulting in substantially enhanced open-circuit voltage (Voc ) and fill factor. As a result, the optimized single-junction WBG PSC achieves an impressive efficiency of 23.18 %, with Voc as high as 1.25 V, which is the highest reported for WBG (over 1.67 eV) PSCs. These devices also demonstrate outstanding thermostability and humidity resistance. Notably, this versatile strategy can be extended to textured perovskite/silicon tandem cells, reaching a remarkable efficiency of 28.24 % while maintaining exceptional operational stability.

Differential cannabinoid-like effects and pharmacokinetics of ADB-BICA, ADB-BINACA, ADB-4en-PINACA and MDMB-4en-PINACA in mice: A comparative study

Despite synthetic cannabinoids' (SCs) prevalent use among humans, these substances often lack comprehensive pharmacological data, primarily due to their rapid emergence in the market. This study aimed to discern differences and causal factors among four SCs (ADB-BICA, ADB-BINACA, ADB-4en-PINACA and MDMB-4en-PINACA), with respect to locomotor activity, body temperature and nociception threshold. Adult male C57BL/6 mice received intraperitoneal injections of varying doses (0.5, 0.1 and 0.02 mg/kg) of these compounds. Three substances (including ADB-BINACA, ADB-4en-PINACA and MDMB-4en-PINACA) demonstrated dose- and time-dependent hypolocomotive and hypothermic effects. Notably, 0.1 mg/kg MDMB-4en-PINACA exhibited analgesic properties. However, ADB-BICA did not cause any effects. MDMB-4en-PINACA manifested the most potent and sustained effects, followed by ADB-4en-PINACA, ADB-BINACA and ADB-BICA. Additionally, the cannabinoid receptor 1 (CB1R) antagonist AM251 suppressed the effects induced by acute administration of the substances. Analysis of molecular binding configurations revealed that the four SCs adopted a congruent C-shaped geometry, with shared linker binding pockets conducive to robust steric interaction with CB1R. Essential residues PHE268 , PHE200 and SER173 within CB1R were identified as pivotal contributors to enhancing receptor-ligand associations. During LC-MS/MS analysis, 0.5 mg/kg MDMB-4en-PINACA exhibited the highest plasma concentration and most prolonged detection window post-administration. The study of SCs' pharmacological and pharmacokinetic profiles is crucial for better understanding the main mechanisms of cannabinoid-like effects induced by SCs, interpreting clinical findings related to SC uses and enhancing SCs risk awareness.

Validation of the Rome Severity Classification of Chronic Obstructive Pulmonary Disease Exacerbation: A Multicenter Cohort Study

Background

The Rome severity classification is an objective assessment tool for the severity of acute exacerbations of chronic obstructive pulmonary disease (AECOPD) based on readily measurable variables but has not been widely validated. The aim of this study is to evaluate the validity of the Rome classification in distinguishing the severity of AECOPD based on short-term mortality and other adverse outcomes.

Methods

The Rome severity classification was applied to a large multicenter cohort of inpatients with AECOPD. Differences in clinical features, in-hospital and 60-day mortality, intensive care unit (ICU) admission, mechanical ventilation (MV) and invasive mechanical ventilation (IMV) usage were compared among the mild, moderate and severe AECOPD according to the Rome proposal. Moreover, univariate logistic analysis and Kaplan Meier survival analysis were also performed to find the association between the Rome severity classification and those adverse outcomes.

Results

A total of 7712 patients hospitalized for AECOPD were included and classified into mild (41.88%), moderate (40.33%), or severe (17.79%) group according to the Rome proposal. The rate of ICU admission (6.4% vs 12.0% vs 14.9%, P <0.001), MV (11.7% vs 33.7% vs 45.3%, P <0.001) and IMV (1.4% vs 6.8% vs 8.9%, P <0.001) increased significantly with the increase of severity classification from mild to moderate to severe AECOPD. The 60-day mortality was higher in the moderate or severe group than in the mild group (3.5% vs 1.9%, 4.3% vs 1.9%, respectively, P <0.05) but showed no difference between the moderate and severe groups (2.6% vs 2.5%, P >0.05), results for in-hospital mortality showed the same trends. Similar findings were observed by univariate logistic analysis and survival analysis.

Conclusion

Rome severity classification demonstrated excellent performance in predicting ICU admission and the need for MV or IMV, but how it performs in differentiating short-term mortality still needs to be confirmed.

Mechanical Durability and Flexibility in Perovskite Photovoltaics: Advancements and Applications

The remarkable progress in perovskite solar cell (PSC) technology has witnessed a remarkable leap in efficiency within the past decade. As this technology continues to mature, flexible PSCs (F-PSCs) are emerging as pivotal components for a wide array of applications, spanning from powering portable electronics and wearable devices to integrating seamlessly into electronic textiles and large-scale industrial roofing. F-PSCs characterized by their lightweight, mechanical flexibility, and adaptability for cost-effective roll-to-roll manufacturing, hold immense commercial potential. However, the persistent concerns regarding the overall stability and mechanical robustness of these devices loom large. This comprehensive review delves into recent strides made in enhancing the mechanical stability of F-PSCs. It covers a spectrum of crucial aspects, encompassing perovskite material optimization, precise crystal grain regulation, film quality enhancement, strategic interface engineering, innovational developed flexible transparent electrodes, judicious substrate selection, and the integration of various functional layers. By collating and analyzing these dedicated research endeavors, this review illuminates the current landscape of progress in addressing the challenges surrounding mechanical stability. Furthermore, it provides valuable insights into the persistent obstacles and bottlenecks that demand attention and innovative solutions in the field of F-PSCs.

cfOmics: a cell-free multi-Omics database for diseases

Liquid biopsy has emerged as a promising non-invasive approach for detecting, monitoring diseases, and predicting their recurrence. However, the effective utilization of liquid biopsy data to identify reliable biomarkers for various cancers and other diseases requires further exploration. Here, we present cfOmics, a web-accessible database (https://cfomics.ncRNAlab.org/) that integrates comprehensive multi-omics liquid biopsy data, including cfDNA, cfRNA based on next-generation sequencing, and proteome, metabolome based on mass-spectrometry data. As the first multi-omics database in the field, cfOmics encompasses a total of 17 distinct data types and 13 specimen variations across 69 disease conditions, with a collection of 11345 samples. Moreover, cfOmics includes reported potential biomarkers for reference. To facilitate effective analysis and visualization of multi-omics data, cfOmics offers powerful functionalities to its users. These functionalities include browsing, profile visualization, the Integrative Genomic Viewer, and correlation analysis, all centered around genes, microbes, or end-motifs. The primary objective of cfOmics is to assist researchers in the field of liquid biopsy by providing comprehensive multi-omics data. This enables them to explore cell-free data and extract profound insights that can significantly impact disease diagnosis, treatment monitoring, and management.

HervD Atlas: a curated knowledgebase of associations between human endogenous retroviruses and diseases

Human endogenous retroviruses (HERVs), as remnants of ancient exogenous retrovirus infected and integrated into germ cells, comprise ∼8% of the human genome. These HERVs have been implicated in numerous diseases, and extensive research has been conducted to uncover their specific roles. Despite these efforts, a comprehensive source of HERV-disease association still needs to be added. To address this gap, we introduce the HervD Atlas (https://ngdc.cncb.ac.cn/hervd/), an integrated knowledgebase of HERV-disease associations manually curated from all related published literature. In the current version, HervD Atlas collects 60 726 HERV-disease associations from 254 publications (out of 4692 screened literature), covering 21 790 HERVs (21 049 HERV-Terms and 741 HERV-Elements) belonging to six types, 149 diseases and 610 related/affected genes. Notably, an interactive knowledge graph that systematically integrates all the HERV-disease associations and corresponding affected genes into a comprehensive network provides a powerful tool to uncover and deduce the complex interplay between HERVs and diseases. The HervD Atlas also features a user-friendly web interface that allows efficient browsing, searching, and downloading of all association information, research metadata, and annotation information. Overall, the HervD Atlas is an essential resource for comprehensive, up-to-date knowledge on HERV-disease research, potentially facilitating the development of novel HERV-associated diagnostic and therapeutic strategies.

Photobiomodulation therapy at 632 nm wavelength ameliorates intrauterine adhesion via activation of cAMP/PKA/CREB pathway

Intrauterine adhesion (IUA), a major cause of uterine infertility, is pathologically characterized by endometrial fibrosis. Current treatments for IUA have poor efficacy with high recurrence rate, and restoring uterine functions is difficult. We aimed to determine the therapeutic efficacy of photobiomodulation (PBM) therapy on IUA and elucidate its underlying mechanisms. A rat IUA model was established via mechanical injury, and PBM was applied intrauterinely. The uterine structure and function were evaluated using ultrasonography, histology, and fertility tests. PBM therapy induced a thicker, more intact, and less fibrotic endometrium. PBM also partly recovered endometrial receptivity and fertility in IUA rats. A cellular fibrosis model was then established with human endometrial stromal cells (ESCs) cultured in the presence of TGF-β1. PBM alleviated TGF-β1-induced fibrosis and triggered cAMP/PKA/CREB signaling in ESCs. Pretreatment with the inhibitors targeting this pathway weakened PBM's protective efficacy in the IUA rats and ESCs. Therefore, we conclude that PBM improved endometrial fibrosis and fertility via activating cAMP/PKA/CREB signaling in IUA uterus. This study sheds more lights on the efficacy of PBM as a potential treatment for IUA.

Comparative Study of Different Pretreatment and Combustion Methods on the Grindability of Rice-Husk-Based SiO2

The rice husk (RH) combustion pretreatment method plays a crucial role in the extraction of nanoscale SiO2 from RH as a silicon source. This study examined the effects of diverse pretreatment methods and combustion temperatures on the particle size distribution of nanoscale high-purity amorphous SiO2 extracted from rice husk ash (RHA) post RH combustion. The experiment was structured using the Taguchi method, employing an L9 (21 × 33) orthogonal mixing table. The median diameter (D50) served as the output response parameter, with the drying method (A), combustion temperature (B), torrefaction temperature (C), and pretreatment method (D) as the input parameters. The results showed the torrefaction temperature (C) as being the predominant factor affecting the D50, which decreased with an increasing torrefaction temperature (C). The optimal parameter combination was identified as A2B2C3D2. The verification test revealed that roasting could improve the abrasiveness of Rh-based silica and reduce the average particle size. Torrefaction at medium temperatures might narrow the size distribution range of RHA-SiO2. We discovered that the purity of silica increased with an increasing roasting temperature by evaluating the concentration of silica in the sample. The production of RHA with silica concentrations up to 92.3% was investigated. X-ray diffraction analysis affirmed that SiO2's crystal structure remained unaltered across different treatment methods, consistently presenting as amorphous. These results provide a reference for extracting high-value products through RH combustion.

High-Performance Hydrogen Evolution Reaction Catalytic Electrodes by Liquid Joule-Heating Growth

Despite the great progress in the research of integrated catalytic electrodes for hydrogen evolution reaction, the efficient preparation of high-performance catalytic electrodes with high current density remains a challenging issue. In this work, a metal (Pt)-amorphous oxide (NiO) heterostructure catalyst is successfully in situ grown on nickel foam using liquid Joule-heating. Based on the superhydrophilic surface of the electrode and its superior mechanical and chemical stability, the catalytic electrode exhibits excellent catalytic performance in alkaline electrolytes with only 100 mV overpotential to achieve 5000 mA cm-2 current density and maintains a stable performance of 500 h under a fixed current density of 1000 mA cm-2 . Further verification of the practical application of the Pt@NiO-Ni electrode in the alkaline electrolyzer is conducted. The results show that the alkaline water electrolyzer with NiFe layered double hydroxide as the anode and Pt@NiO-Ni as the cathode exhibits superior performance than the previously reported electrolyzers, with a current density of 1 A cm-2 already achieved at 1.75 V, which is even comparable to some anion exchange membrane water electrolyzers. These experimental results illustrate the strong applicability of Pt@NiO-Ni electrode at industrial scale current densities.

Origin and Mechanism of Piezoelectric and Photovoltaic Effects in (111) Polar Orientated NiO Films

Based on the current piezoelectric theory, NiO with the centrosymmetric structure is not piezoelectric. However, herein, this study shows the first observation of piezoelectric generation, rectifyingand bulk photovoltaic behaviors in NiO films with [111] orientation and the change in NiO crystal structure in piezoelectric process. The piezoelectric generation, rectifying, and bulk photovoltaic performances are enhanced by increasing (111) orientation, and attenuated and eliminated by applying a persistent stress on the NiO film. The NiO [111] is polar direction, and thus a spontaneous electric field (ES ) is in the NiO film with [111] orientation. The existence of Es in (111) oriented NiO film is found to be the physical basis of the piezoelectric generators and photovoltaic and rectifying effects. Thus, NiO piezoelectric, rectifying, and bulk photovoltaic mechanism are presented at the atomic level. The mechanism may rewrite the current piezoelectric theory, and establish a unified theory of polar structure with wide implications. The polar-orientated films can be used to fabricate piezoelectric generators and other optoelectronic devices with high performances.

Dual-Interface Engineering in Perovskite Solar Cells with 2D Carbides

Passivating the interfaces between the perovskite and charge transport layers is crucial for enhancing the power conversion efficiency (PCE) and stability in perovskite solar cells (PSCs). Here we report a dual-interface engineering approach to improving the performance of FA0.85 MA0.15 Pb(I0.95 Br0.05 )3 -based PSCs by incorporating Ti3 C2 Clx Nano-MXene and o-TB-GDY nanographdiyne (NanoGDY) into the electron transport layer (ETL)/perovskite and perovskite/ hole transport layer (HTL) interfaces, respectively. The dual-interface passivation simultaneously suppresses non-radiative recombination and promotes carrier extraction by forming the Pb-Cl chemical bond and strong coordination of π-electron conjugation with undercoordinated Pb defects. The resulting perovskite film has an ultralong carrier lifetime exceeding 10 μs and an enlarged crystal size exceeding 2.5 μm. A maximum PCE of 24.86 % is realized, with an open-circuit voltage of 1.20 V. Unencapsulated cells retain 92 % of their initial efficiency after 1464 hours in ambient air and 80 % after 1002 hours of thermal stability test at 85 °C.

High-Performance Planar Field-Emission Photodetector of Monolayer Tungsten Disulfide with Microtips

Monolayer tungsten disulfide (ML WS2 ) is believed as an ideal photosensitive material due to its small direct bandgap, large exciton/trion binding energy, high carrier mobility, and considerable quantum conversion efficiency. Compared with other photosensitive devices, planar field emission (FE)-type photodetectors with a full-plane structure should simultaneously have rapider switching speed and lower power consumption. In this work, ML WS2 microtips are fabricated by electron beam lithography (EBL) way and used to construct a planar FE-type photodetector. By optimization design, ML WS2 with three microtips can exhibit the maximum current density as high as  52 A cm-2 (@300 V µm-1 ), and the largest photoresponsivity is up to 6.8 × 105 A W-1 under green light irradiation, superior to that of many other ML transition metal dichalcogenide (TMDC) detectors. More interestingly, ML WS2 devices with microtips can effectively solve the contradictory problem between large photoresponsivity and rapid switching speed. The excellent photoresponse performances of ML WS2 with microtips should be attributed to their high carrier mobility, sharp emission edge, ultrahigh quantum yield, and unique planar FE device structure. Our research may shed new light on exploring the fabrication technology and photosensitive mechanism of two dimensional (2D) material-based planar FE photodetectors.

A new deuterium-labeled compound [2,3,4,6,6'-2 H5 ]-D-glucose for deuterium magnetic resonance metabolic imaging

Deuterium (² H) magnetic resonance imaging is an emerging approach for noninvasively studying glucose metabolism in vivo, which is important for understanding pathogenesis and monitoring the progression of many diseases such as tumors, diabetes, and neurodegenerative diseases. However, the synthesis of ² H-labeled glucose is costly because of the expensive raw substrates and the requirement for extreme reaction conditions, making the ² H-labeled glucose rather expensive and unaffordable for clinic use. In this study, we present a new deuterated compound, [2,3,4,6,6'-² H₅ ]-D-glucose, with an approximate 10-fold reduction in production costs. The synthesis route uses cheaper raw substrate methyl-α-D-glucopyranoside, relies on mild reaction conditions (80°C), and has higher deuterium labeling efficiency. Magnetic resonance spectroscopy (MRS) and mass spectroscopy experiments confirmed the successful deuterium labeling in the compound. Animal studies demonstrated that the substrate could describe the glycolytic metabolism in a glioma rat model by quantifying the downstream metabolites through ² H-MRS on an ultrahigh field system. Comparison of the glucose metabolism characteristics was carried out between [2,3,4,6,6'-² H₅ ]-D-glucose and commercial [6,6'-² H₂ ]-D-glucose in the animal studies. This cost-effective compound will help facilitate the clinical translation of deuterium magnetic resonance imaging, and enable this powerful metabolic imaging modality to be widely used in both preclinical and clinical research and applications.

Insights into Intramuscular Connective Tissue Associated with Wooden Breast Myopathy in Fast-Growing Broiler Chickens

Wooden breast myopathy (WBM) is a meat abnormality affecting pectoralis majors (PMs) of fast-growing broiler chickens. WBM-affected PMs exhibited varied meat qualities with increasing WBM severity. Normal PMs (NOR), mild WBM-affected PMs (MIL), moderate WBM-affected PMs (MOD), and severe WBM-affected PMs (SEV) were selected as raw materials. The structure and organization of connective tissue and fibrillar collagen were investigated through immersing with sodium hydroxide solution, Masson trichrome staining, and using an electron microscope. The mechanical strength of intramuscular connective tissue was analyzed via the shear force of samples treated with sodium hydroxide solution. The thermal property and secondary structure of connective tissue were analyzed by differential scanning calorimetry and Fourier transform infrared spectroscopy. The obtained connective tissue was dissolved in a sodium hydroxide solution for the evaluation of the physicochemical properties of proteins, including particle size, molecular weight, surface hydrophobicity, and intrinsic fluorescence. In particular, the particle size was measured using a zeta potential instrument. The molecular weight was analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis. The surface hydrophobicity and intrinsic fluorescence were measured by spectroscopy technology. Histologically, macrophage infiltration, myodegeneration and necrosis, regeneration, fibrous connective tissue, and thickened perimysial connective tissue were observed in WBM-affected PMs, especially SEV with fibrosis, including blood vessels. Compared with NOR, WBM led to increased average diameter of the collagen fibrils in perimysial (36.61 nm of NOR to 69.73 nm of SEV) and endomysial (34.19 nm of NOR to 56.93 nm of SEV) layers. A significant increase (p < 0.05) was observed in the mechanical strength (2.05 N to 5.55 N) of fresh PMs and the thermal transition temperature (onset temperature (T_O), 61.53 °C to 67.50 °C; maximum transition temperature (T_M), 66.46 °C to 70.18 °C; termination temperature (T_E), 77.20 °C to 80.88 °C) of connective tissue from NOR to SEV. Cooking decreased the mechanical strength, and MOD samples showed the highest mechanical strength (1.24 N, p < 0.05), followed by SEV (0.96 N), MIL (0.93 N), and NOR (0.72 N). For proteins in connective tissue, random coil (19.64% to 29.61%, p < 0.0001), particle size (p < 0.05), and surface hydrophobicity (p < 0.05) increased with the decrease in the α-helix (14.61% to 11.54%, p < 0.0001), β-sheet (45.71% to 32.80%, p < 0.0001), and intrinsic fluorescence of proteins from NOR to SEV. The molecular weights of intramuscular connective tissue proteins were in the ranges of >270 kDa, 180-270 kDa, 110-180 kDa, 95-100 kDa, and <15 kDa. Taken together, WBM resulted in thickened organization, tightly packed collagen fibrils, increased mechanical strength and thermal temperature, and increased particle size, surface hydrophobicity, and intrinsic fluorescence of proteins in connective tissue, as the WBM severity increased.

[Clinical features and related factors of invasive pulmonary aspergillosis in patients with acute exacerbation of chronic obstructive pulmonary disease]

Objective: To study the clinical features and related factors of invasive pulmonary aspergillosis (IPA) in patients with acute exacerbation of chronic obstructive pulmonary disease (AECOPD). Methods: This retrospective study enrolled patients hospitalized for AECOPD in ten tertiary hospitals of China from September 2017 to July 2021. AECOPD patients with IPA were included as case group, AECOPD patients without IPA were randomly selected as control group from the same hospitals and same hospitalization period as the patients with IPA using the random function in the software of Microsoft Excel 2003, at a ratio of 2∶1. The clinical characteristics, treatment and outcome were compared between the two groups. Binary logistic regression model was used to analyze the factors associated with IPA in AECOPD patients. Results: A total of 14 007 inpatients with AECOPD were included in this study, and 300 patients were confirmed to have IPA, with an incidence rate of 2.14%. According to the above matching method, 600 AECOPD patients without aspergillus infection were enrolled as the control group. The age of the case group and the control group were (72.5±9.7) and (73.5±10.3) years old, with 78.0%(n=234) male and 76.8%(n=461) male, respectively. There were no significant differences in age and gender composition between the two groups (all P>0.05). The prognosis of case group was significantly worse than that of the control group, with longer hospital stay [M(Q₁,Q₃)], [14 (10-20) d vs 11 (8-15) d, P<0.001], higher ICU admission rate [16.3% (49 case) vs 10.0% (60 case), P=0.006], higher in-hospital mortality [4.0% (12 cases) vs 1.3% (8 cases), P=0.011], and higher hospitalization costs (28 000 ¥ vs 13 700 ¥, P<0.001). The smoking index of the case group and proportions of patients with diabetes mellitus, chronic pulmonary heart disease in the case group were significantly higher than those in control group (all P<0.05). In terms of clinical features, the proportions of patients with cough, expectoration, purulent sputum, hemoptysis and fever in the case group were higher than those in the control group, the serum albumin was significantly lower than that in the control group, and the proportions of patients with bronchiectasis and pulmonary bullae on imaging were significantly higher than those in the control group (all P<0.05). Diabetes (OR=1.559, 95%CI: 1.084-2.243), chronic pulmonary heart disease (OR=1.476, 95%CI: 1.075-2.028), bronchiectasis (OR=1.506, 95%CI: 1.092-2.078), pulmonary bullae (OR=1.988, 95%CI: 1.475-2.678) and serum albumin<35 g/L (OR=1.786, 95%CI: 1.325-2.406) were the related factors of IPA in patients with AECOPD. Conclusions: The incidence of IPA in AECOPD patients is relatively high and the prognosis of these patients is worse. Diabetes, chronic pulmonary heart disease, bronchiectasis, pulmonary bulla, hypoproteinemia are the related factors of IPA in patients with AECOPD.

Graphdiyne and Its Derivatives as Efficient Charge Reservoirs and Transporters in Semiconductor Devices

2D graphdiyne (GDY), which is composed of sp and sp² hybridized carbon atoms, is a promising semiconductor material with a unique porous lamellar structure. It has high carrier mobility, tunable bandgap, high density of states, and strong electrostatic interaction ability with ions and organic functional units. In recent years, interests in applying GDYs (GDY and its derivatives) in semiconductor devices have been growing rapidly, and great achievements have been made. Attractively, GDYs could act as efficient reservoirs and transporters for both carriers and ions, which endows them with enormous potential in future novel optoelectronics. In this review, the progress in this field is systematically summarized, aiming to bring an in-depth insight into the GDYs' intrinsic uniqueness. Particularly, the effects of GDYs on carrier dynamics and ionic interactions in various semiconductor devices are succinctly described, analyzed, and concluded.

Wide-Bandgap Organic-Inorganic Lead Halide Perovskite Solar Cells

Under the groundswell of calls for the industrialization of perovskite solar cells (PSCs), wide-bandgap (>1.7 eV) mixed halide perovskites are equally or more appealing in comparison with typical bandgap perovskites when the former's various potential applications are taken into account. In this review, the progress of wide-bandgap organic-inorganic hybrid PSCs-concentrating on the compositional space, optimization strategies, and device performance-are summarized and the issues of phase segregation and voltage loss are assessed. Then, the diverse applications of wide-bandgap PSCs in semitransparent devices, indoor photovoltaics, and various multijunction tandem devices are discussed and their challenges and perspectives are evaluated. Finally, the authors conclude with an outlook for the future development of wide-bandgap PSCs.

Highly Stretchable High-Performance Silicon Nanowire Field Effect Transistors Integrated on Elastomer Substrates

Quasi-1D silicon nanowires (SiNWs) field effect transistors (FETs) integrated upon large-area elastomers are advantageous candidates for developing various high-performance stretchable electronics and displays. In this work, it is demonstrated that an orderly array of slim SiNW channels, with a diameter of <80 nm, can be precisely grown into desired locations via an in-plane solid-liquid-solid (IPSLS) mechanism, and reliably batch-transferred onto large area polydimethylsiloxane (PDMS) elastomers. Within an optimized discrete FETs-on-islands architecture, the SiNW-FETs can sustain large stretching strains up to 50% and repetitive testing for more than 1000 cycles (under 20% strain), while achieving a high hole carrier mobility, Ion /Ioff current ratio and subthreshold swing (SS) of ≈70 cm2 V-1 s-1 , >105  and 134 - 277 mV decade-1 , respectively, working stably in an ambient environment over 270 days without any passivation protection. These results indicate a promising new routine to batch-manufacture and integrate high-performance, scalable and stretchable SiNW-FET electronics that can work stably in harsh and large-strain environments, which is a key capability for future practical flexible display and wearable electronic applications.

Hyperthermia ablation combined with transarterial chemoembolization versus monotherapy for hepatocellular carcinoma: A systematic review and meta-analysis

BACKGROUND AND AIMS

The existing evidence has indicated that hyperthermia ablation (HA) and HA combined with transarterial chemoembolization (HATACE) are the optimal alternative to surgical resection for patients with hepatocellular carcinoma (HCC) in the COVID-19 crisis. However, the evidence for decision-making is lacking in terms of comparison between HA and HATACE. Herein, a comprehensive evaluation was performed to compare the efficacy and safety of HATACE with monotherapy.

MATERIALS AND METHODS

Worldwide studies were collected to evaluate the HATACE regimen for HCC due to the practical need for global extrapolation of applicative population. Meta-analyses were performed using the RevMan 5.3 software (The Nordic Cochrane Centre, The Cochrane Collaboration, Copenhagen, Denmark).

RESULTS

Thirty-six studies involving a large sample of 5036 patients were included finally. Compared with HA alone, HATACE produced the advantage of 5-year overall survival (OS) rate (OR:1.90; 95%CI:1.46,2.46; p < 0.05) without increasing toxicity (p ≥ 0.05). Compared with TACE alone, HATACE was associated with superior 5-year OS rate (OR:3.54; 95%CI:1.96,6.37; p < 0.05) and significantly reduced the incidences of severe liver damage (OR:0.32; 95%CI:0.11,0.96; p < 0.05) and ascites (OR:0.42; 95%CI:0.20,0.88; p < 0.05). Subgroup analysis results of small (≤3 cm) HCC revealed that there were no significant differences between the HATACE group and HA monotherapy group in regard to the OS rates (p ≥ 0.05).

CONCLUSIONS

Compared with TACE alone, HATACE was more effective and safe for HCC. Compared with HA alone, HATACE was more effective for non-small-sized (>3 cm) HCC with comparable safety. However, the survival benefit of adjuvant TACE in HATACE regimen was not found for the patients with small (≤3 cm) HCC.

Potential Implications of Citrulline and Quercetin on Gut Functioning of Monogastric Animals and Humans: A Comprehensive Review

The importance of gut health in animal welfare and wellbeing is undisputable. The intestinal microbiota plays an essential role in the metabolic, nutritional, physiological, and immunological processes of animals. Therefore, the rapid development of dietary supplements to improve gut functions and homeostasis is imminent. Recent studies have uncovered the beneficial effects of dietary supplements on the immune response, microbiota, gut homeostasis, and intestinal health. The application of citrulline (a functional gut biomarker) and quercetin (a known potent flavonoid) to promote gut functions has gained considerable interest as both bioactive substances possess anti-inflammatory, anti-oxidative, and immunomodulatory properties. Research has demonstrated that both citrulline and quercetin can mediate gut activities by combating disruptions to the intestinal integrity and alterations to the gut microbiota. In addition, citrulline and quercetin play crucial roles in maintaining intestinal immune tolerance and gut health. However, the synergistic benefits which these dietary supplements (citrulline and quercetin) may afford to simultaneously promote gut functions remain to be explored. Therefore, this review summarizes the modulatory effects of citrulline and quercetin on the intestinal integrity and gut microbiota, and further expounds on their potential synergistic roles to attenuate intestinal inflammation and promote gut health.

Identification of the gut microbiota biomarkers associated with heat cycle and failure to enter oestrus in gilts

Failed puberty is one of the main reasons for eliminating gilts from production herds. This is often caused by disorders of sex hormones. An increasing number of studies have suggested that the gut microbiota may regulate sex hormones and vice versa. Whether the gut microbiota is involved in the failure of oestrus in gilts remains unknown. We used 16S rRNA gene sequencing, network-based microbiota analysis and prediction of functional capacity from 16S rRNA gene sequences to explore the shifts in the gut microbiota throughout a heat cycle in 22 eight-month-old gilts. We found that a module of co-occurrence networks composed of Sphaerochaeta and Treponema, co-occurred with oestrus during a heat cycle. The mcode score of this module reflecting the stability and importance in the network achieved the highest value at the oestrus stage. We then identified bacterial biosignatures associated with the failure to show puberty in 163 gilts. Prevotella, Treponema, Faecalibacterium, Oribacterium, Succinivibrio and Anaerovibrio were enriched in gilts showing normal heat cycles, while Lachnospiraceae, Ruminococcus, Coprococcus and Oscillospira had higher abundance in gilts failing to show puberty. Prediction of functional capacity of the gut microbiome identified a lesser abundance of the pathway 'retinol metabolism' in gilts that failed to undergo puberty. This pathway was also significantly associated with those bacterial taxa involved in failed puberty identified in this study (P < 0.05). This result suggests that the changed gut bacteria might result in a disorder of retinol metabolism, and this may be an explanation for the failure to enter oestrus.

Fabrication of Anti-Reflective Surface with Superhydrophobicity/High Oleophobicity and Enhanced Mechanical Durability via Nanosecond Laser Surface Texturing

In this work, anti-reflective surface with superhydrophobicity/oleophobicity and enhanced abrasion resistance was fabricated on steel alloy surface. Two different surface patterns (i.e., parallel microgrooves and spot arrays) were created by nanosecond laser ablation and chemical immersion. The surface micro/nanostructure, spectral reflectance, wettability, and abrasion resistance of all the samples were determined. The experimental results showed that the laser-chemical treated surfaces exhibited much lower spectral reflectance and significantly enhanced surface integrities compared with the untreated surface. Firstly, the contact angles of water, glycerol, and engine oil on the laser-chemical treated surfaces were increased up to 158.9°, 157.2°, and 130.0° respectively, meaning the laser-chemical treated surfaces achieved both superhydrophobicity and high oleophobicity. Secondly, the laser-chemical treated surface showed enhanced abrasion resistance. The experimental results indicated that the spectral reflectance of the laser-chemical treated surfaces remained almost unchanged, while the laser-chemical treated surface patterned with parallel microgrooves sustained superhydrophobicity with a water contact angle of 150.2° even after more than one hundred abrasion cycles, demonstrating the superior mechanical durability. Overall, this fabrication method has shown its effectiveness for fabrication of multifunctional metal surface integrating the surface functionalities of anti-reflectivity, superhydrophobicity/high oleophobicity, and enhanced abrasion resistance.

The exopolysaccharide-eDNA interaction modulates 3D architecture of Bacillus subtilis biofilm

BACKGROUND

Bacterial biofilms are surface-adherent microbial communities in which individual cells are surrounded by a self-produced extracellular matrix of polysaccharides, extracellular DNA (eDNA) and proteins. Interactions among matrix components within biofilms are responsible for creating an adaptable structure during biofilm development. However, it is unclear how the interactions among matrix components contribute to the construction of the three-dimensional (3D) biofilm architecture.

RESULTS

DNase I treatment significantly inhibited Bacillus subtilis biofilm formation in the early phases of biofilm development. Confocal laser scanning microscopy (CLSM) and image analysis revealed that eDNA was cooperative with exopolysaccharide (EPS) in the early stages of B. subtilis biofilm development, while EPS played a major structural role in the later stages. In addition, deletion of the EPS production gene epsG in B. subtilis SBE1 resulted in loss of the interaction between EPS and eDNA and reduced the biofilm biomass in pellicles at the air-liquid interface. The physical interaction between these two essential biofilm matrix components was confirmed by isothermal titration calorimetry (ITC).

CONCLUSIONS

Biofilm 3D structures become interconnected through surrounding eDNA and EPS. eDNA interacts with EPS in the early phases of biofilm development, while EPS mainly participates in the maturation of biofilms. The findings of this study provide a better understanding of the role of the interaction between eDNA and EPS in shaping the biofilm 3D matrix structure and biofilm formation.

Predicting the turning points of housing prices by combining the financial model with genetic algorithm

The turning points of housing prices play a significant role in the real estate market and economy. However, because multiple factors impact the market, the prediction of the turning points of housing prices faces significant challenges. To solve this problem, in this study, a historical data-based model that incorporates a multi-population genetic algorithm with elitism into the log-periodic power law model is proposed. This model overcomes the weaknesses of multivariate and univariate methods that it does not require any external factors while achieving excellent interpretations. We applied the model to the case study collected from housing prices in Wuhan, China, from December 2016 to October 2018. To verify its reliability, we compared the results of the proposed model to those of the log-periodic power law model optimized by the standard genetic algorithm and simulated annealing, the results of which indicate that the proposed model performs best in terms of prediction. Efficiently predicting and analyzing the housing prices will help the government promulgate effective policies for regulating the real estate market and protect home buyers.

Nanoscale Ring-Shaped Conduction Channels with Memristive Behavior in BiFeO₃ Nanodots

Nanoscale ring-shaped conduction channels with memristive behavior have been observed in the BiFeO₃ (BFO) nanodots prepared by the ion beam etching. At the hillside of each individual nanodot, a ring-shaped conduction channel is formed. Furthermore, the conduction channels exhibit memristive behavior, i.e., their resistances can be continuously tuned by the applied voltages. More specifically, a positive (negative) applied voltage reduces (increases) the resistance, and the resistance continuously varies as the repetition number of voltage scan increases. It is proposed that the surface defects distributed at the hillsides of nanodots may lower the Schottky barriers at the Pt tip/BFO interfaces, thus leading to the formation of ring-shaped conduction channels. The surface defects are formed due to the etching and they may be temporarily stabilized by the topological domain structures of BFO nanodots. In addition, the electron trapping/detrapping at the surface defects may be responsible for the memristive behavior, which is supported by the surface potential measurements. These nanoscale ring-shaped conduction channels with memristive behavior may have potential applications in high-density, low-power memory devices.

Intraseasonal variation of the summer rainfall over the Southeastern United States

This study characterizes the intraseasonal variability (ISV) in the Southeastern United States (SE US) rainfall in boreal summer and delineates the associated dynamical processes featuring three-way interactions among the SE US rainfall, the central US low-level jet (LLJ), and the North Atlantic subtropical high (NASH). The analysis reveals that the ISV of the SE summer rainfall peaks at the 10‒20-day timescales. The physical mechanisms for the three-way interactions on the 10‒20-day timescales are proposed. When the NASH attains a minimum strength, the reduced size of the NASH is accompanied with an eastward retreat of the western ridge of the NASH, leading to a decrease in the zonal pressure gradient and consequently a weakening of the LLJ 1 day after. The weakened LLJ and the eastward-shifted NASH western ridge induces anomalous cyclonic circulation over the SE US, moves preferred regions of moisture convergence from central US to the SE US, and 3 days later the SE US rainfall attains its maximum strength. The excessive latent heating associated with the enhanced SE US rainfall excites an anomalous anticyclone northeast of the rainfall region, resulting in an increase in the NASH intensity that peaks 2 days after the maximum SE US rainfall. The NASH subsequently expands with its western ridge moving westward, zonal pressure gradient restored, and LLJ strength recovered. An anomalous anticyclone then emerges over the SE US and suppresses rainfall, marking the shift from an intraseasonal wet phase to dry phase in this region. A more rigorous proof of these causalities demand carefully designed numerical experiments and further statistical analysis in future. Our results suggest that improved prediction of SE US summer rainfall across intraseasonal scales depends critically on the model representation of the three-way coupling among the NASH, the central US LLJ, and the SE US rainfall.

GPU based parallel acceleration for fast C-arm cone-beam CT reconstruction

BACKGROUND

With the introduction of Flat Panel Detector technology, cone-beam CT (CBCT) has become a novel image modality, and widely applied in clinical practices. C-arm mounted CBCT has shown extra suitability in image guided interventional surgeries. During practice, how to acquire high resolution and high quality 3D images with the real time requirement of clinical applications remain challenging.

METHODS

In this paper, we propose a GPU based accelerated method for fast C-arm CBCT 3D image reconstructions. A filtered back projection method is optimized and implemented with GPU parallel acceleration technique. A distributed system is designed to make full use of the image acquisition consumption to hide the reconstruction delay to further improve system performance.

RESULTS

With the acceleration both in algorithm and system design, we show that our method significantly increases system efficiency. The optimized GPU accelerated FDK algorithm improves the reconstruction efficiency. The system performance is further enhanced with the proposed system design by 26% and reconstruction delay is accelerated by 2.1 times when 90 frames of projections are used. When the number of frames used increases to 120, the numbers are 39% and 3.3 times. We also show that when the projection acquisition consumption increases, the reconstruction acceleration rate increases significantly.

Stearoyl-CoA desaturase-1 promotes colorectal cancer metastasis in response to glucose by suppressing PTEN

BACKGROUND

Diabetic patients have a higher risk factor for colorectal cancer (CRC) metastasis. Stearoyl-CoA desaturase 1 (SCD1), the main enzyme responsible for producing monounsaturated fatty acids(MUFA) from saturated fatty acids, is frequently deregulated in both diabetes and CRC. The function and mechanism of SCD1 in metastasis of CRC and its relevance to glucose remains largely unknown.

METHODS

SCD1 expression levels were analyzed in human CRC tissues and the Cancer Browser database ( https://genome-cancer.ucsc.edu/ ). CRC cell lines stably transfected with SCD1 shRNAs or vector were established to investigate the role of SCD1 in modulating migration and invasion of CRC cells. A glucose concentration gradient was set to investigate regulation of SCD1 in CRC relevant to diabetic conditions.

RESULTS

The clinical data analysis showed high expression of SCD1 in CRC tissues with a negative correlation with the prognosis of CRC. In vitro experiments revealed that SCD1 increased CRC progression through promoting epithelial-mesenchymal transition (EMT). Lipidomic analysis demonstrated that SCD1 increased MUFA levels and MUFA administration could rescue migration and invasion defect of CRC cells induced by SCD1 knockdown. Furthermore, SCD1-mediated progression of CRC was promoted by carbohydrate response-element binding protein (ChREBP) in response to high glucose. Mechanistically, hyperglycemia-SCD1-MUFA induced CRC cell migration and invasion by regulating PTEN.

CONCLUSIONS

Our findings show that SCD1 promotes metastasis of CRC cells through MUFA production and suppressing PTEN in response to glucose, which may be a novel mechanism for diabetes-induced CRC metastasis.

ICAM-1-Targeted Liposomes Loaded with Liver X Receptor Agonists Suppress PDGF-Induced Proliferation of Vascular Smooth Muscle Cells

The proliferation of vascular smooth muscle cells (VSMCs) is one of the key events during the progress of atherosclerosis. The activated liver X receptor (LXR) signalling pathway is demonstrated to inhibit platelet-derived growth factor BB (PDGF-BB)-induced VSMC proliferation. Notably, following PDGF-BB stimulation, the expression of intercellular adhesion molecule-1 (ICAM-1) by VSMCs increases significantly. In this study, anti-ICAM-1 antibody-conjugated liposomes were fabricated for targeted delivery of a water-insoluble LXR agonist (T0901317) to inhibit VSMC proliferation. The liposomes were prepared by filming-rehydration method with uniform size distribution and considerable drug entrapment efficiency. The targeting effect of the anti-ICAM-T0901317 liposomes was evaluated by confocal laser scanning microscope (CLSM) and flow cytometry. Anti-ICAM-T0901317 liposomes showed significantly higher inhibition effect of VSMC proliferation than free T0901317 by CCk8 proliferation assays and BrdU staining. Western blot assay further confirmed that anti-ICAM-T0901317 liposomes inhibited retinoblastoma (Rb) phosphorylation and MCM6 expression. In conclusion, this study identified anti-ICAM-T0901317 liposomes as a promising nanotherapeutic approach to overcome VSMC proliferation during atherosclerosis progression.

Functional analysis of the GmESR1 gene associated with soybean regeneration

Plant regeneration can occur via in vitro tissue culture through somatic embryogenesis or de novo shoot organogenesis. Transformation of soybean (Glycine max) is difficult, hence optimization of the transformation system for soybean regeneration is required. This study investigated ENHANCER OF SHOOT REGENERATION 1 (GmESR1), a soybean transcription factor that targets regeneration-associated genes. Sequence analysis showed that GmESR1 contained a conserved 57 amino acid APETALA 2 (AP2)/ETHYLENE RESPONSE FACTOR (ERF) DNA-binding domain. The relative expression level of GmESR1 was highest in young embryos, flowers and stems in the soybean cultivar 'Dongnong 50'. To examine the function of GmESR1, transgenic Arabidopsis (Arabidopsis thaliana) and soybean plants overexpressing GmESR1 were generated. In Arabidopsis, overexpression of GmESR1 resulted in accelerated seed germination, and seedling shoot and root elongation. In soybean overexpression of GmESR1 also led to faster seed germination, and shoot and root elongation. GmESR1 specifically bound to the GCC-box. The results provide a foundation for the establishment of an efficient and stable transformation system for soybean.

Shear Performance of Horizontal Joints in Short Precast Concrete Columns with Sleeve Grouted Connections under Cyclic Loading

In this study, two short precast concrete columns and two cast-in-situ concrete columns were tested under cyclic loads. It was shown that the sleeve grouted connection was equivalent to the cast-in-situ connections for short columns when the axial compression ratio was 0.6. In order to determine the influence of the axial compression ratio and the shear-span ratio on the shear capacity of the horizontal joint, a FE model was established and verified. The analysis showed that the axial compression ratio is advantageous to the joint and the shear capacity of the horizontal joint increases with increase of the shear-span ratio. Based on the results, the methods used to estimate the shear capacity of horizontal joints in the Chinese Specification and the Japanese Guidelines are discussed and it was found that both overestimated the shear capacity of the horizontal joint. In addition, the Chinese Specification failed to consider the influence of the shear-span ratio.