TiO2 photocatalysis: Design and applications

Optimization of TiO2-natural hydrogels for paracetamol and ibuprofen degradation in wastewaters

Agarose/micrometer titanium dioxide (TiO2) beads were essayed to test the photocatalytic capacity of two of the most widely prescribed drugs worldwide: paracetamol and ibuprofen. Although the initial tests demonstrated promising degradation rates for both drugs, the presence of turbidity, due to TiO2 leakage, during the photocatalytic essays induced to improve the stability of the photocatalytic composites. Among the different strategies adopted to strengthen such materials, crosslinking with citric acid and the use of alternative gelling agents: gellan, agargel™, and agar were chosen. Composites obtained by merging both strategies were characterized and employed to degrade both drugs under a simulated light that mimics the solar spectrum (indoor). Considering the superior degradation rates obtained when agar and agarose were used to shape the titanium oxide particles (up to 70-75% of drug destruction), such composites were subjected to a more realistic experiment (outdoor): solar illumination, tap water, and higher volumes, that should facilitate its ulterior scale up as a real wastewater depollution procedure. Degradation rates between 80 and 90% are attained under such conditions for both drugs.

Comprehensive review of industrial wastewater treatment techniques

Water is an indispensable resource for human activity and the environment. Industrial activities generate vast quantities of wastewater that may be heavily polluted or contain toxic contaminants, posing environmental and public health challenges. Different industries generate wastewater with widely varying characteristics, such as the quantity generated, concentration, and pollutant type. It is essential to understand these characteristics to select available treatment techniques for implementation in wastewater treatment facilities to promote sustainable water usage. This review article provides an overview of wastewaters generated by various industries and commonly applied treatment techniques. The characteristics, advantages, and disadvantages of physical, chemical, and biological treatment methods are presented.

Conformal TiO2 Aerogel-Like Films by Plasma Deposition: from Omniphobic Antireflective Coatings to Perovskite Solar Cell Photoelectrodes

The ability to control the porosity of thin oxide films is a key factor determining their properties. Despite the abundance of dry processes for synthesizing oxide porous layers, a high porosity range is typically achieved by spin-coating-based wet chemical methods. Besides, special techniques such as supercritical drying are required to replace the pore liquid with air while maintaining the porous network. In this study, we propose a new method for the fabrication of ultraporous titanium dioxide thin films at room or mild temperatures (T ≤ 120 °C) by a sequential process involving plasma deposition and etching. These films are conformal to the substrate topography even for high-aspect-ratio substrates and show percolated porosity values above 85% that are comparable to those of advanced aerogels. The films deposited at room temperature are amorphous. However, they become partly crystalline at slightly higher temperatures, presenting a distribution of anatase clusters embedded in the sponge-like open porous structure. Surprisingly, the porous structure remains after annealing the films at 450 °C in air, which increases the fraction of embedded anatase nanocrystals. The films are antireflective, omniphobic, and photoactive, becoming superhydrophilic when subjected to ultraviolet light irradiation. The supported, percolated, and nanoporous structure can be used as an electron-conducting electrode in perovskite solar cells. The properties of the cells depend on the aerogel-like film thickness, which reaches efficiencies close to those of commercial mesoporous anatase electrodes. This generic solvent-free synthesis is scalable and applicable to ultrahigh porous conformal oxides of different compositions, with potential applications in photonics, optoelectronics, energy storage, and controlled wetting.

Titanium Superoxide as a Carrier of a "Long-Lived" Superoxide Anion: An Ab Initio Investigation

The photoinduced generation of a superoxide anion on the surface of a semiconductor photocatalyst is usually attributed to the reduction of O2 with conduction-band electrons. In the current work, the reaction of TiO2 with O2 giving rise to TiO4 in superoxide and peroxide states has been investigated with ab initio (CAS, CCSD) and DFT (B3LYP) calculations. The ground triplet state and two substates (open-shell singlet (OSS) and closed-shell singlet (CSS)) of a doubly degenerate excited singlet state (a1Δg) are considered as reactive states of oxygen, participating in spontaneous or photoinduced processes, respectively. The triplet and OSS singlet states of TiO4 contain O2- as structural units and can be defined as titanium superoxides. Both states have energy less than the level of the initial pair TiO2+O2 by about 30 kcal/mol. The CSS state of TiO4 has a diperoxide structure Ti4+(O22-)2 and also lies in energy below the initial pair TiO2+3O2. Titanium superoxide is considered to be the carrier of an "exceptionally stable" and "long-lived" superoxide anion, which was earlier synthesized or detected on the surface of TiO2. The low-energy location of the conical intersections on the way from reagents to 3TiO4 allows us to explain the literature data on the spontaneous generation of the "long-lived" superoxide anion on the TiO2 surface.

Two-Dimensional Sc2CCl2/XSe2(X=Mo, Pt) van der Waals Heterojunctions: Promising Photocatalytic Hydrogen Evolution Materials

In the field of photocatalysis, new heterojunction materials are increasingly explored to achieve efficient energy conversion and environmental catalysis under visible light and sunlight. This paper presents a study on two newly constructed two-dimensional van der Waals heterojunctions, Sc2CCl2/MoSe2 and Sc2CCl2/PtSe2, using density-functional theory. The study includes a systematic investigation of their geometrical structure, electronic properties, and optical properties. The results indicate that both heterojunctions are thermodynamically, kinetically, and mechanically stable. Additionally, Bader charge analysis reveals that both heterojunctions exhibit typical type II band properties. However, the band gap of the Sc2CCl2/MoSe2 heterojunction is only 1.18 eV, which is insufficient to completely cross the reduction and oxidation (REDOX) potential of 1.23 eV, whereas the band gap of Sc2CCl2/PtSe2 heterojunction is 1.49 eV, which is theoretically capable for water decomposition. The subsequent calculation of the Sc2CCl2/PtSe2 heterojunction demonstrate excellent hole carrier mobility and high efficiency light absorption in the visible light range, facilitating the separation of photogenerated electrons and holes. More importantly, Sc2CCl2/PtSe2 vdW type II heterojunction can achieve full water decomposition from pH 1 to pH 4, and its thermodynamic feasibility is confirmed by Gibbs free energy results. The aim of this study is to develop materials and analyses that will result in optoelectronic devices that are more efficient, stable, and sustainable.

Harnessing Magnetic Nanoparticles for the Effective Removal of Micro- and Nanoplastics: A Critical Review

The spread of micro- (MPs) and nanoplastics (NPs) in the environment has become a significant environmental concern, necessitating effective removal strategies. In this comprehensive scientific review, we examine the use of magnetic nanoparticles (MNPs) as a promising technology for the removal of MPs and NPs from water. We first describe the issues of MPs and NPs and their impact on the environment and human health. Then, the fundamental principles of using MNPs for the removal of these pollutants will be presented, emphasizing that MNPs enable the selective binding and separation of MPs and NPs from water sources. Furthermore, we provide a short summary of various types of MNPs that have proven effective in the removal of MPs and NPs. These include ferromagnetic nanoparticles and MNPs coated with organic polymers, as well as nanocomposites and magnetic nanostructures. We also review their properties, such as magnetic saturation, size, shape, surface functionalization, and stability, and their influence on removal efficiency. Next, we describe different methods of utilizing MNPs for the removal of MPs and NPs. We discuss their advantages, limitations, and potential for further development in detail. In the final part of the review, we provide an overview of the existing studies and results demonstrating the effectiveness of using MNPs for the removal of MPs and NPs from water. We also address the challenges that need to be overcome, such as nanoparticle optimization, process scalability, and the removal and recycling of nanoparticles after the completion of the process. This comprehensive scientific review offers extensive insights into the use of MNPs for the removal of MPs and NPs from water. With improved understanding and the development of advanced materials and methods, this technology can play a crucial role in addressing the issues of MPs and NPs and preserving a clean and healthy environment. The novelty of this review article is the emphasis on MNPs for the removal of MPs and NPs from water and a detailed review of the advantages and disadvantages of various MNPs for the mentioned application. Additionally, a review of a large number of publications in this field is provided.

Bio-Polyethylene and Polyethylene Biocomposites: An Alternative toward a Sustainable Future

Polyethylene (PE), a highly prevalent non-biodegradable polymer in the field of plastics, presents a waste management issue. To alleviate this issue, bio-based PE (bio-PE), derived from renewable resources like corn and sugarcane, offers an environmentally friendly alternative. This review discusses various production methods of bio-PE, including fermentation, gasification, and catalytic conversion of biomass. Interestingly, the bio-PE production volumes and market are expanding due to the growing environmental concerns and regulatory pressures. Additionally, the production of PE and bio-PE biocomposites using agricultural waste as filler materials, highlights the growing demand for sustainable alternatives to conventional plastics. According to previous studies, addition of ≈50% defibrillated corn and abaca fibers into bio-PE matrix and a compatibilizer, results in the highest Young's modulus of 4.61 and 5.81 GPa, respectively. These biocomposites have potential applications in automotive, building construction, and furniture industries. Moreover, the advancement made in abiotic and biotic degradation of PE and PE biocomposites is elucidated to address their environmental impacts. Finally, the paper concludes with insights into the opportunities, challenges, and future perspectives in the sustainable production and utilization of PE and bio-PE biocomposites. In summary, production of PE and bio-PE biocomposites can contribute to a cleaner and sustainable future.

A triazine-based covalent organic framework decorated with cadmium sulfide for efficient photocatalytic hydrogen evolution from water

Construction of inorganic/organic heterostructures has been proven to be a very promising strategy to design highly efficient photocatalysts for solar driven hydrogen evolution from water. Herein, we report the preparation of a direct Z-scheme heterojunction photocatalyst by in situ growth of cadmium sulfide on a triazine-based covalent organic framework (COF). The triazine based-COF was synthesized by condensation reaction of precursors 1,3,5-tris-(4-formyl-phenyl) triazine (TFPT) and 2,5-bis-(3-hydroxypropoxy) terephthalohydrazide (DHTH), termed as TFPT-DHTH-COF. Widely distributed nitrogen atoms throughout TFPT-DHTH-COF skeletons serve as anchoring sites for strong interfacial interactions with CdS. The CdS/TFPT-DHTH-COF composite showed a hydrogen evolution rate of 15.75 mmol h-1 g-1, which is about 75 times higher than that of TFPT-DHTH-COF (0.21 mmol h-1 g-1) and 3.4 times higher than that of CdS (4.57 mmol h-1 g-1). With the properly staggered band alignment and strong interfacial interaction between TFPT-DHTH-COF and CdS, a Z-scheme charge transfer pathway is achieved. The mechanism has been systematically analyzed by steady state and time-resolved photoluminescence measurements as well as in situ irradiated X-ray photoelectron spectroscopy.

Ternary tin-doped titanium dioxide/calcium oxide (Sn-TiO2/CaO) composite as a photocatalyst for efficient removal of toxic dyes

In this study, a novel environmentally friendly route was explored for the synthesis of a tin-doped titanium dioxide/calcium oxide (Sn-TiO2/CaO) composite using eggshell as a ternary photocatalyst. The composite was prepared via a simple hydrothermal method, resulting in a unique material with potential applications in photocatalysis. The prepared photocatalysts were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, UV-vis/diffuse reflectance spectroscopy, scanning electron microscopy, X-ray fluorescence, and the Brunauer-Emmett-Teller techniques. At the same time, the Sn-TiO2/CaO composite shows excellent degradation activity for toxic dyes. The degradation efficiencies for alizarin red, bromophenol blue, methylene blue, malachite green, and methyl red are 68.38%, 62.39%, 76.81%, 86.93%, and 17.52%, respectively, under ultraviolet light irradiation for 35 min at pH = 3. In addition, the best photocatalytic degradation efficiency for zero charge (pH 7) and basic pH is for AR 98.21% and 68.38%, MR 33.01% and 17.52%, BPB 73.17% and 17.52%, MB 72.32% and 76.81%, and MG 85.59% and 86.93%, respectively, under UV light irradiation for 35 min. The increase in photocatalytic activity of the ternary photocatalyst is accredited to the enhancement of electron-hole pair separation. Simultaneous photodegradation and photoreduction of organic dyes show that ternary photocatalysts could be used in real wastewater applications.

Commonly Existing Hole-Capturer Organics Adsorption-Induced Recombination over Metal/Semiconductor Perimeters: A Possible Important Factor Affecting Photocatalytic Efficiencies

Photocatalysis is a physiochemical effect arising from the relaxation of photoinduced electrons from the conduction band to the valence band. Controlling the electron relaxation to occur through photocatalytic pathways and prohibiting other relaxations is the main scientific thought for photocatalytic studies. It is needed to know the parallel relaxation pathways that can compete with photocatalytic reactions. By means of in situ photoconductances (PCs) and photoinduced absorptions (PAs), the current research studied the photoinduced electron relaxations of the Au/TiO2 in different atmospheres and at different temperatures. The PC and PA relaxations became different and fast when methanol, ethanol, isopropanol, and acetone were introduced; they also tend to decrease as temperature increases, while that of the undecorated TiO2 in all atmospheres and the Au/TiO2 in pure N2 increased. The results indicated that the organic adsorptions over the Au/TO2 perimeters change the relaxation pathway, and a hole-capturing organics adsorption-induced recombination over the Au/TiO2 perimeter was proposed to explain the relaxations. We found that this relaxation also exists for Ag/TiO2, Pt/TiO2, and Au/ZnO, so it is a commonly existing physical course for the metal/semiconductor (M/S) materials. The effect of the organics and M/S structures on the relaxation was discussed, and the relationship with photocatalytic reactions was also analyzed. Our finding means that blocking this relaxation pathway is an effective way to increase photocatalytic activities, which might open a door for highly active photocatalyst developments.

Vacuum-ultraviolet based advanced oxidation and reduction processes for water treatment

The use of vacuum-ultraviolet (VUV) photolysis in water treatment has been gaining significant interest due to its efficacy in degrading refractory organic contaminants and eliminating oxyanions. In recent years, the reactive species driving pollutant decomposition in VUV-based advanced oxidation and reduction processes (VUV-AOPs and VUV-ARPs) have been identified. This review aims to provide a concise overview of VUV photolysis and its advancements in water treatment. We begin with an introduction to VUV irradiation, followed by a summary of the primary reactive species in both VUV-AOPs and VUV-ARPs. We then explore the factors influencing VUV-photolysis in water treatment, including VUV irradiation dose, catalysts or activators, dissolved gases, water matrix components (e.g., DOM and inorganic anions), and solution pH. In VUV-AOPs, the predominant reactive species are hydroxyl radicals (˙OH), hydrogen peroxide (H2O2), and ozone (O3). Conversely, in VUV-ARPs, the main reactive species are the hydrated electron (eaq-) and hydrogen atom (˙H). It is worth noting that VUV-based advanced oxidation/reduction processes (VUV-AORPs) can transit between VUV-AOPs and VUV-ARPs based on the externally added chemicals and dissolved gases in the solution. Increase of the VUV irradiation dose and the concentration of catalysts/activators enhances the degradation of contaminants, whereas DOM and inorganic anions inhibit the reaction. The pH influences the redox potential of ˙OH, the speciation of contaminants and activators, and thus the overall performance of the VUV-AOPs. Conversely, an alkaline pH is favored in VUV-ARPs because eaq- predominates at higher pH.

Modification of cellulose with TiO2 nanoparticles: Potential solar driven photocatalyst and adsorbent

In-situ modification of cellulose fibers with titania nanoparticles (TiO2 NPs) (TiO2 NPs-cellulose) was carried out via the sol-gel process using titania sol and fibers of cellulose. Cellulose fibers were extracted from wheat straw, an agricultural waste material, whereas titania sol was prepared from titanium(IV) acetoximate, [Ti{ONC(CH3)2}4]. The synthesized TiO2 NPs-cellulose composite was characterized by FT-IR, SEM-EDX, and XRD analyses. The obtained results exposed that TiO2 NPs were homogeneously dispersed over the surface of cellulose fibers. A study was conducted to compare the photocatalytic activities of TiO2 NPs-cellulose composite and TiO2 NPs towards the degradation of methylene blue and methyl orange dyes under sunlight, and it was observed that the photo-degradation of methylene blue (99.99%) and methyl orange (80.73%) within 160 min is higher in the presence of TiO2 NPs-cellulose composite than TiO2 NPs. The adsorption capabilities of TiO2 NPs-cellulose composite towards Pb2+, Cd2+, and Cr3+ toxic metal ions were also examined, and it was found 44.73 mg. g-1 (89.46%), 38.82 mg. g-1 (77.65%), and 4.42 mg. g-1 (8.85%), respectively. Removal of pollutants from textile industrial effluent were also investigated using TiO2 NPs-cellulose composite under sun light. The results obtained were very promising which shows potential of TiO2 NPs-cellulose composite as an efficient photocatalyst and absorbent for real time applications.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s40201-023-00884-9.

Low density phases of TiO2 by cluster self-assembly

The interest in titanium dioxide (TiO2 ) phases is growing due to the number of applications in cosmetics, food industry and photocatalysis, an increase that is driven by its exceptional properties when engineered at the nanoscale like in the form of nanoparticles. Our goal is to discover unknown low-density phases of TiO2 , with potential for applications in various fields. We then use well-known TiO2 clusters as fundamental building blocks to be self-assembled into unique structures to study their distinct characteristics. Density functional calculations are employed to relax the structures and identify the most stable TiO2 structures within an energy range of 0.1 eV per atom from the rutile and anatase phases, which are confirmed, validating our methodology. Going beyond conventional phases, we found two-dimensional TiO2 structures, previously explored in separate studies, and showing typical structures of transition metal dichalcogenide layers, that forge a bridge between different TiO2 structures. It is noteworthy that our investigation uncovered an entirely novel class of TiO2 structures featuring hexagonal cages like beehive channels, opening novel phases with huge potential. These discovered low-density phases are interesting, particularly the hexagonal cage structures with remarkable large gaps, because they introduce other dimensions for uncharted applications in the ever-growing TiO2 landscape.

Plasmonic effect of metal nanoparticles on the photocatalytic properties of TiO2/rGO composite

A comparative study of the plasmon effect of Ag and Au nanoparticles on TiO2/rGO nanocomposite was carried out. The synthesis of Au and Ag nanoparticles was carried out by laser ablation. The morphology and structure of the nanocomposites were studied by EDA, HRTEM, XRD and Raman spectroscopy. It was shown that the absorption capacity of the nanocomposite material was increased in the visible range of the spectrum when Ag and Au nanoparticles were added to TiO2/rGO. This leads to an increase in their photocatalytic activity. The photocurrent generated by NC/Au 10-11films is in 3.8 times and NC/Ag 10-12is in 2 times higher compared to pure TiO2/rGO film. Similar results were obtained from experimental data on the dyes photodegradation. In the presence of plasmon nanoparticles a significant enhancement in the electrical properties of the TiO2/rGO nanocomposite was recorded. The charge carrier transfer resistance in nanocomposites was decreased by almost ∼7 times for NC/Au,10-11and ∼4 times for NC/Ag,10-12films compared to pure TiO2/rGO. In addition, for nanocomposites with Ag or Au nanoparticles, a decrease in the effective electron lifetime was observed. The data obtained allow us to conclude that plasmonic NPs have a synergistic effect in TiO2/rGO nanocomposites, which consists in modifying both their light-harvesting properties and charge-transport characteristics. The results obtained can be used for the design of materials with improved photocatalytic and optoelectronic characteristics.

Highly visible-light-active sulfur and carbon co-doped TiO2 (SC-TiO2) heterogeneous photocatalysts prepared by underwater discharge plasma

To promptly and simply create highly crystalline S/C co-doped TiO2 (SC-TiO2) photocatalysts at room temperature and atmospheric pressure, we suggest a novel plasma-assisted sol-gel synthesis method. This method is a simultaneous synthetic process, in which an underwater plasma undergoes continuous reactions to generate high-energy atomic and molecular species that enable TiO2 to achieve crystallinity, a large surface area, and a heterogeneous structure within a few minutes. In particular, it was demonstrated that the heterogeneously structured TiO2 was formed by doping that sulfur and carbon replace O or Ti atoms in the TiO2 lattice depending on the composition of the synthesis solution during underwater plasma treatment. The resultant SC-TiO2 photocatalysts had narrowed bandgap energies and extended optical absorption scope into the visible range by inducing the intermediate states within bandgap due to generation of oxygen vacancies on the surface of TiO2 through synthesis, crystallization, and doping. Correspondingly, SC-TiO2 showed a significant degradation efficiency ([k] = 6.91 h-1) of tetracycline (TC, antibiotics) under solar light irradiation, up to approximately 4 times higher compared to commercial TiO2 ([k] = 1.68 h-1), resulting in great water purification. Therefore, we anticipate that this underwater discharge plasma system will prove to be an advantageous technique for producing heterostructural TiO2 photocatalysts with superior photocatalytic efficiency for environmental applications.

Mixed Metal Oxide W-TiO2 Nanopowder for Environmental Process: Synergy of Adsorption and Photocatalysis

A mixed metal oxide W-TiO2 nanopowder photocatalyst was prepared by using the sol-gel method with a broad range of elemental compositions x = CW/(CW + CTi), including TiO2 and WO3. The material was structurally characterized and evaluated in adsorption and photocatalytic processes by testing its removal capacity of a representative pollutant methylene blue (MB) in aqueous solutions and under UV-A and sunlight illuminations. The nanopowders appeared to be more effective adsorbents than pure TiO2 and WO3 materials, showing a maximum at 15 mol% W, which was set as the tungsten solubility limit in anatase titania. At the same time, the photocatalytic decomposition of MB peaked at 2 mol% W. The examination of different compositions showed that the most effective MB removal took place at 15 mol% W, which was attributed to the combined action of adsorption and heterogeneous photocatalysis. Moreover, MB decomposition under sunlight was stronger than under UV-A, suggesting photocatalyst activation by visible light. The pollutant removal efficiency of the material with 15 mol% W was enhanced by a factor of ~10 compared to pure TiO2 at the beginning of the process, which shows its high potential for use in depollution processes in emergency cases of a great pollutant leak. As a result, a Wx=0.15-TiO2 catalyst could be of high interest for wastewater purification in industrial plants.

Achieving water-floatable photocatalyst on recycled bamboo chopsticks

Disposable bamboo chopsticks (DBCs) are difficult to recycle, which inevitably cause secondary pollution. Based on energy and environmental issues, we propose a facile strategy to fabricate floatable photocatalyst (fPC) coated onto DBCs, which can be flexibly used in water purification. The photocatalyst of titania and titanium carbide on bamboo (TiO2/TiC@b) was successfully constructed from TiC-Ti powders and DBCs using a coating technique followed heat treatment in carbon powder, and the fPC exhibited excellent photocatalytic activity under visible light irradation. The analysis results indicate that rutile TiO2 forms on TiC during heat treatment, achieving a low-density material with an average value of approximately 0.5233 g/cm3. The coatings of TiO2/TiC on the bamboo are firm and uniform, with a particle size of about 20-50 nm. XPS results show that a large amount of oxygen vacancies is generated, due to the reaction atmosphere of more carbon and less oxygen, further favoring to narrowing the band gap of TiO2. Furthermore, TiO2 formed on residual TiC would induce the formation of a heterojunction, which effectively inhibits the photogenerated electron-hole recombination via the charge transfer effect. Notably, the degradation of dye Rhodamine B (Rh.B) is 62.4% within 3 h, while a previous adsorption of 36.0% for 1 h. The excellent photocatalytic performance of TiO2/TiC@b can be attributed to the enhanced reaction at the water/air interface due to the reduced light loss in water, improved visible-light response, increased accessible area and charge transfer effect. Our findings show that the proposed strategy achieves a simple, low-cost, and mass-producible method to fabricate fPC onto the used DBCs, which is expected to applied in multiple fields, especially in waste recycling and water treatment.

Light-Triggered Inflation of Microdroplets

Driven systems composed largely of droplets and fuel make up a significant portion of microbiological function. At the micrometer scale, fully synthetic systems that perform an array of tasks within a uniform bulk are much more rare. In this work, we introduce an innovative design for solid-in-oil composite microdroplets. These microdroplets are engineered to nucleate an internal phase, undergo inflation, and eventually burst, all powered by a steady and uniform energy input. We show that by altering the background input, volumetric change and burst time can be tuned. When the inflated droplets release the inner contents, colloidal particles are shown to transiently attract to the release point. Lastly, we show that the system has the ability to perform multiple inflation-burst cycles. We anticipate that our conceptual design of internally powered microdroplets will catalyze further research into autonomous systems capable of intricate communication as well as inspire the development of advanced, responsive materials.

The Fabrication and Property Characterization of a Ho2YSbO7/Bi2MoO6 Heterojunction Photocatalyst and the Application of the Photodegradation of Diuron under Visible Light Irradiation

A novel photocatalytic nanomaterial, Ho2YSbO7, was successfully synthesized for the first time using the solvothermal synthesis technique. In addition, a Ho2YSbO7/Bi2MoO6 heterojunction photocatalyst (HBHP) was prepared via the hydrothermal fabrication technique. Extensive characterizations of the synthesized samples were conducted using various instruments, such as an X-ray diffractometer, a Fourier transform infrared spectrometer, a Raman spectrometer, a UV-visible spectrophotometer, an X-ray photoelectron spectrometer, and a transmission electron microscope, as well as X-ray energy dispersive spectroscopy, photoluminescence spectroscopy, a photocurrent test, electrochemical impedance spectroscopy, ultraviolet photoelectron spectroscopy, and electron paramagnetic resonance. The photocatalytic activity of the HBHP was evaluated for the degradation of diuron (DRN) and the mineralization of total organic carbon (TOC) under visible light exposure for 152 min. Remarkable removal efficiencies were achieved, with 99.78% for DRN and 97.19% for TOC. Comparative analysis demonstrated that the HBHP exhibited markedly higher removal efficiencies for DRN compared to Ho2YSbO7, Bi2MoO6, or N-doped TiO2 photocatalyst, with removal efficiencies 1.13 times, 1.21 times, or 2.95 times higher, respectively. Similarly, the HBHP demonstrated significantly higher removal efficiencies for TOC compared to Ho2YSbO7, Bi2MoO6, or N-doped TiO2 photocatalyst, with removal efficiencies 1.17 times, 1.25 times, or 3.39 times higher, respectively. Furthermore, the HBHP demonstrated excellent stability and reusability. The mechanisms which could enhance the photocatalytic activity remarkably and the involvement of the major active species were comprehensively discussed, with superoxide radicals identified as the primary active species, followed by hydroxyl radicals and holes. The results of this study contribute to the advancement of efficient heterostructural materials and offer valuable insights into the development of sustainable remediation strategies for addressing DRN contamination.

Molecular surface-dependent light harvesting and photo charge separation in plant-derived carbon quantum dots for visible-light-driven OH radical generation for remediation of aromatic hydrocarbon pollutants and real wastewater

Despite the growing emphasis on eco-friendly nanomaterials as energy harvesters, scientists are actively searching for metal-free photocatalysts to be used in environmental remediation strategies. Developing renewable resource-based carbon quantum dots (CQDs) as the sole photocatalyst to harvest visible light for efficient pollutant degradation is crucial yet challenging, particularly for addressing the escalating issue of water deterioration. Moreover, the photocatalytic decomposition of H2O2 under visible light irradiation remains an arduous task. Based on this, we designed two types of CQDs, C-CQDs (carboxylic-rich) and A-CQDs (amine-rich) with distinct molecular surfaces. Owing to the higher amount of upward band bending induced by amine-rich molecular surface, A-CQDs efficiently harvest the visible light and prevent recombination kinetics resulting in prolonged lifetimes (25 ps), and augmented charge carrier density (35.7 × 1018) of photoexcited charge carriers. A-CQDs enabled rapid visible-light-driven photolysis of H2O2 (k = 0.058 min-1) and produced higher quantity of •OH radicals (0.158 μmol/sec) for the mineralization of petroleum waste, BETX (i.e. Benzene, Ethylbenzene, Toluene and Xylene) (k = 0.017-0.026 min-1) and real textile wastewater (k = 0.026 min-1). To assess comparative toxicities of both remediated and non-remediated real wastewater samples in a time and dose depended manner, Drosophila melanogaster was used as a model organism. The findings unequivocally demonstrate the potential of remediated wastewater for watering urban forestry.

Friction Reduction Achieved by Ultraviolet Illumination on TiO2 Surface

Controlling friction by light field is a low-cost, low-energy, non-polluting method. By applying ultraviolet light on the surface of photosensitive materials, the properties of the friction pairs or lubricant can be influenced, thus achieving the purpose of reducing friction. In this study, TiO2, an inorganic photosensitive material, was selected to investigate the modulating effect of light fields on friction lubrication when using polyalphaolefin (PAO) base oil as a lubricant, and the modulation law of light fields on the friction lubrication behavior was investigated under different loads (1-8 N), different speeds (20-380 mm/s), and different viscosities (10.1-108.6 mPa·s) of PAO base oil. The experimental results showed that light treatment could reduce the friction coefficient of PAO4 base oil lubrication from 0.034 to 0.016, with a reduction of 52.9% under conditions of 3 N-load and 56.5 mm/s-speed, and the best regulation effect could be achieved under the mixed lubrication condition. After TiO2 was treated with ultraviolet light, due to its photocatalytic property, PAO molecules were oxidized and adsorbed on the TiO2 surface to form an adsorption layer, which avoided the direct contact of rough peaks and thus reduced the friction coefficient. This study combines photosensitivity, photocatalysis, and friction, presenting a method to reduce the friction coefficient by applying a light field without changing the friction pairs or lubricants, which provides a new direction for friction modulation and gives new ideas for practical applications.

Improved Photocatalytic Performance of TiO2-Nitrogen-Doped Graphene Quantum Dot Composites Mediated by Heterogeneous Interactions

Photocatalysis is typically monitored via analysis of phases in isolation and focuses on the removal of a target analyte from the solution phase. Here we analyze the photocatalytic action of a TiO2-nitrogen-doped graphene quantum dot (NGQD) composite on a target analyte, phenol, using comprehensive multiphase NMR (CMP-NMR) which observes signals in solid, solution, and gel phases in situ. Phenol preferentially interacts with the composite photocatalyst compared to pure TiO2, increasing its effective concentration near the catalyst surface and its degradation rate. The presence of NGQDs in the composite reduced the fouling of the catalyst surface and caused a reduction of photogenerated intermediates. Increased heterogeneous interactions, likely mediated by π-π interactions, are hypothesized to cause each of these improvements in the observed photocatalytic performance by TiO2-NGQDs. CMP-NMR allows the elucidation of how the photocatalytic mechanism is enhanced via material design and provides a foundation for the development of efficient photocatalysts.

Fabrication of ZnO Scaffolded CdS Nanostructured Photoanodes with Enhanced Photoelectrochemical Water Splitting Activity under Visible Light

CdS, characterized by its comparatively narrow energy band gap (∼2.4 eV), is an appropriate material for prospective use as a photoanode in photoelectrochemical water splitting. Regrettably, it encounters several obstacles for practical and large-scale applications, including issues such as bulk carrier recombination and diminished conductivity. Here, we have tried to address these challenges by fabricating a novel photoelectrode (ZnO/CdS) composed of one-dimensional ZnO nanorods (NRs) decorated with two-dimensional CdS nanosheets (NSs). A facile two-step chemical method comprising electrodeposition along with chemical bath deposition is employed to synthesize the ZnO NRs, CdS NSs, and ZnO/CdS nanostructures. The prepared nanostructures have been investigated by UV-visible absorption spectroscopy, X-ray diffraction, Raman spectroscopy, transmission electron microscopy (TEM), and scanning electron microscopy. The fabricated ZnO/CdS nanostructures have shown enhanced photoelectrochemical properties due to the improvement of the semiconductor junction surface area and thereby enhanced visible light absorption. The incorporation of CdS NSs has been further found to promote the rate of the charge separation and transfer process. Subsequently, the fabricated ZnO/CdS photoelectrodes achieved a photocurrent conversion efficiency 3 times higher than that of a planar ZnO NR photoanode and showed excellent performance under visible light irradiation. The highest applied bias photon-to-current conversion efficiency (% ABPE) of about ∼0.63% has been obtained for the sample with thicker CdS NSs on ZnO NRs with a photocurrent density of ∼1.87 mA/cm2 under AM 1.5 G illumination. The newly synthesized nanostructures further demonstrate that the full photovoltaic capacity of nanomaterials is yet to be exhausted.

Pt-TiO2 catalysts for glycerol photoreforming: comparison of anatase, brookite and rutile polymorphs

We compared the H2 production from glycerol photoreforming for different TiO2 polymorphs, highlighting an increase of activity in the order Pt-rutile < Pt-P25 ≈ Pt-anatase < Pt-brookite with a different distribution of the reaction intermediates. We show that the highest ability to adsorb water and the different distribution of Pt active sites in brookite can positively influence its photoactivity.

The role of sheet-like TiO2 in polyamide reverse osmosis membrane for enhanced removal of endocrine disrupting chemicals

Thin film composite (TFC) reverse osmosis (RO) membrane shows good promise for treating wastewater containing endocrine disrupting chemical (EDC) pollutants. The incorporation of functional materials with exceptional structural and physico-chemical properties offers opportunities for the membranes preparation with enhanced permselectivity and better antifouling properties. The present study aims to improve the EDC removal efficiency of TFC RO membrane using two-dimensional titania nanosheets (TNS). RO membrane was prepared by incorporating TNS in the dense layer of polyamide (PA) layer to form thin film nanocomposite (TFN) membrane. The TNS loading was varied and the influences on membrane morphology, surface hydrophilicity, surface charge, as well as water permeability and rejection of EDC were investigated. The results revealed that the inclusion of TNS in the membrane resulted in the increase of water permeability and EDC rejection. When treating the mixture of bisphenol A (BPA) and caffeine at 100 ppm feed concentration, the TFN membrane incorporated with 0.05% TNS achieved water permeability of 1.45 L/m2·h·bar, which was 38.6% higher than that of unmodified TFC membrane, while maintaining satisfactory rejection of >97%. The enhancement of water permeability for TFN membrane can be attributed to their hydrophilic surface and unique nanochannel structure created by the nanoscale interlayer spacing via staking of TiO2 nanosheets. Furthermore, the 0.05TFN membrane exhibited excellent fouling resistance towards BPA and caffeine pollutants with almost 100% flux recovery for three cycles of operations.

Citrate silver nanoparticles impregnated cellulose as a photocatalytic filter in the degradation of organic dye in the aqueous media

Photocatalysis is a clean and efficient process pursued under light irradiation with a suitable photocatalyst to degrade a contaminant. We report citrate functionalization of silver nanoparticles (SNPs) for effective immobilization on cellulosic fabric. The porous cellulosic matrix could be explored as microfiltration membranes for the photocatalytic degradation of organic dyes in the aqueous media. Where valid, the citrate functionalized SNPs and the treated cellulose fabrics were considered for optical, structural, surface chemical, thermal, textile, flowability, photocatalytic, and antibacterial attributes. The SNPs expressed the bandgap energy of 2.56 and 2.43 eV and Urbach energy of 3.38 and 5.21 eV before and after functionalization with the citrate moieties, respectively. The liquid chromatographic and FTIR analyses indicated that the crystal violet (CV) organic dye has been successfully photodegraded to environmentally safer and nontoxic species on passing the contaminated water through the SNPs-treated cellulosic filter. The spectroscopic data also supported the said outcomes. The results demonstrated that the citrate-SNPs-treated cellulose could be efficiently employed as antibacterial photocatalytic membranes for degrading organic dyes in the aqueous media for multiple cycles.

Current trends on dry photocatalytic oxidation technology for BTX removal: Viable light sources and highly efficient photocatalysts

One of the main gaseous pollutants released by chemical production industries are benzene, toluene and xylene (BTX). These dangerous gases require immediate technology to combat them, as they put the health of living organisms at risk. The development of heterogeneous photocatalytic oxidation technology offers several viewpoints, particularly in gaseous-phase decontamination without an additional supply of oxidants in air at atmospheric pressure. However, difficulties such as low quantum efficiency, ability to absorb visible light, affinity towards CO2 and H2O synthesis, and low stability continue to limit its practical use. This review presents recent advances in dry-phase heterogeneous photodegradation as an advanced technology for the practical removal of BTX molecules. This review also examines the impact of low-cost light sources, the roles of the active sites of photocatalysts, and the feasible concentration range of BTX molecules. Numerous studies have demonstrated a significant improvement in the efficiency of the photodegradation of volatile organic compounds by enhancing the photocatalytic reactor system and other factors, such as humidity, temperature, and flow rate. The mechanism for BTX photodegradation based on density functional theory (DFT), electron paramagnetic resonance (EPR) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) investigations is also discussed. Finally, the present research complications and anticipated future developments in the field of heterogeneous photocatalytic oxidation technology are discussed.

Anti-Environmental Aging Passive Daytime Radiative Cooling

Passive daytime radiative cooling technology presents a sustainable solution for combating global warming and accompanying extreme weather, with great potential for diverse applications. The key characteristics of this cooling technology are the ability to reflect most sunlight and radiate heat through the atmospheric transparency window. However, the required high solar reflectance is easily affected by environmental aging, rendering the cooling ineffective. In recent years, significant advancements have been made in understanding the failure mechanisms, design strategies, and manufacturing technologies of daytime radiative cooling. Herein, a critical review on anti-environmental aging passive daytime radiative cooling with the goal of advancing their commercial applications is presented. It is first introduced the optical mechanisms and optimization principles of radiative cooling, which serve as a basis for further endowing environmental durability. Then the environmental aging conditions of passive daytime radiative cooling, mainly focusing on UV exposure, thermal aging, surface contamination and chemical corrosion are discussed. Furthermore, the developments of anti-environmental aging passive daytime radiative cooling materials, including design strategies, fabrication techniques, structures, and performances, are reviewed and classified for the first time. Last but not the least, the remaining open challenges and the insights are presented for the further promotion of the commercialization progress.

TiO2/PDA Multilayer Nanocomposites with Exceptionally Sharp Large-Scale Interfaces and Nitrogen Doping Gradient

The evolving field of photocatalysis requires the development of new functional materials, particularly those suitable for large-scale commercial systems. One particularly promising approach is the creation of hybrid organic/inorganic materials. Despite being extensively studied, materials such as polydopamine (PDA) and titanium oxide continue to show significant promise for use in such applications. Nitrogen-doped titanium oxide and free-standing PDA films obtained at the air/water interface are particularly interesting. This study introduces a straightforward and reproducible approach for synthesizing a novel class of large-scale multilayer nanocomposites. The method involves the alternate layering of high-quality materials at the air/water interface combined with precise atomic layer deposition techniques, resulting in a gradient nitrogen doping of titanium oxide layers with exceptionally sharp oxide/polymer interfaces. The analysis confirmed the presence of nitrogen in the interstitial and substitutional sites of the TiO2 lattice while maintaining the 2D-like structure of the PDA films. These chemical and structural characteristics translate into a reduction of the band gap by over 0.63 eV and an increase in the photogenerated current by over 60% compared with pure amorphous TiO2. Furthermore, the nanocomposites demonstrate excellent stability during the 1 h continuous photocurrent generation test.

Density functional theory for doped TiO2: current research strategies and advancements

Since the inception of the density functional theory (DFT) by Hohenberg and Kohn in 1964, it rapidly became an indispensable theoretical tool across various disciplines, such as chemistry, biology, and materials science, among others. This theory has ushered in a new era of computational research, paving the way for substantial advancements in fundamental understanding. Today, DFT is routinely employed for a diverse range of applications, such as probing new material properties and providing a profound understanding of the mechanisms underlying physical, chemical, and biological processes. Even after decades of active utilization, the improvement of DFT principles has never been slowed down, meaning that more accurate theoretical results are continuously generated with time. This work highlights the latest achievements acquired by DFT in the specific research field, namely the theoretical investigations of doped TiO2systems, which have not been comprehensively reviewed and summarized yet. Successful progress in this niche is currently hard to imagine without the support by DFT. It can accurately reveal new TiO2properties after introducing the desired dopant and help to find the optimal system design for a specific application prior to proceeding to more time-consuming and expensive experimental research. Hence, by evaluating a selection of the most recent research studies, we aim to highlight the pertinent aspects of DFT as they relate to the study of doped TiO2systems. We also aim to shed light on the strengths and weaknesses of DFT and present the primary strategies employed thus far to predict the properties of various doped TiO2systems reliably.

A rationally designed 3DTiO2@CdZnS heterojunction photocatalyst for effectively enhanced visible-light-driven hydrogen evolution

Hydrogen production with higher efficiency and lower cost is of great significance for the sustainable development of energy. Zinc cadmium sulfide (CZS) is gaining more attention owing to its excellent photocatalytic properties. However, its development is greatly limited due to photogenerated charge recombination. In this work, an innovative design with a unique 3D morphology was introduced by integrating 3DTiO2 into CZS to form a novel 3DTiO2/CZS heterojunction photocatalyst. As a result, the optimized composite achieved a very high hydrogen production rate of 75.38 mmol h-1 g-1 under visible light, which is 2.4 times higher than that of the original CZS. It can also be greatly demonstrated through photoelectrochemical tests that this unique 3D morphology contributes to the effective separation of electrons and holes, thus dramatically improving the photocatalytic activity of 3DTiO2/CZS composites. The 3DTiO2/CZS composite has a rational energy band structure, which makes it more favorable for the hydrogen precipitation reaction. It is believed that such a modification strategy based on 3DTiO2 can be applied to other similar photocatalysts as well for boosting hydrogen evolution.

Copper Single-Atom Catalysts-A Rising Star for Energy Conversion and Environmental Purification: Synthesis, Modification, and Advanced Applications

Future renewable energy supply and green, sustainable environmental development rely on various types of catalytic reactions. Copper single-atom catalysts (Cu SACs) are attractive due to their distinctive electronic structure (3d orbitals are not filled with valence electrons), high atomic utilization, and excellent catalytic performance and selectivity. Despite numerous optimization studies are conducted on Cu SACs in terms of energy conversion and environmental purification, the coupling among Cu atoms-support interactions, active sites, and catalytic performance remains unclear, and a systematic review of Cu SACs is lacking. To this end, this work summarizes the recent advances of Cu SACs. The synthesis strategies of Cu SACs, metal-support interactions between Cu single atoms and different supports, modification methods including modification for carriers, coordination environment regulating, site distance effect utilizing, and dual metal active center catalysts constructing, as well as their applications in energy conversion and environmental purification are emphatically introduced. Finally, the opportunities and challenges for the future Cu SACs development are discussed. This review aims to provide insight into Cu SACs and a reference for their optimal design and wide application.

Nanoparticle-based nanocomposite coatings with postprocessing for enhanced antimicrobial capacity of polymeric film

Bacterial adhesion and biofilm formation on surfaces pose a significant risk of microbial contamination and chronic diseases, leading to potential health complications. To mitigate this concern, the implementation of antibacterial coatings becomes paramount in reducing pathogen propagation on contaminated surfaces. To address this requirement, our study focuses on developing cost-effective and sustainable methods using polymer composite coatings. Copper and titanium dioxide nanoparticles were used to assess their active antimicrobial functions. After coating the surface with nanoparticles, four different combinations of two postprocessing treatments were performed. Intense pulsed light was utilized to sinter the coatings further, and plasma etching was applied to manipulate the physical properties of the nanocomposite-coated sheet surface. Bacterial viability was comparatively analyzed at four different time points (0, 30, 60, and 120 min) upon contact with the nanocomposite coatings. The samples with nanoparticle coatings and postprocessing treatments showed an above-average 84.82% mortality rate at 30 min and an average of 89.77% mortality rate at 120 min of contact. In contrast, the control sample, without nanoparticle coatings and postprocessing treatments, showed a 95% microbe viability after 120 min of contact. Through this study, we gained critical insights into effective strategies for preventing the spread of microorganisms on high-touch surfaces, thereby contributing to the advancement of sustainable antimicrobial coatings.

Changes in Tablet Color Due to Light Irradiation: Photodegradation of the Coating Polymer, Hypromellose, by Titanium Dioxide

The color of the tablets and capsules produced by pharmaceutical companies is important from the perspectives of product branding and counterfeiting. According to some studies, light can change tablet color during storage. In this study, tablets comprising amlodipine besylate (AB), a well-known light-sensitive drug, were coated with commonly used coating materials and exposed to light. Compared to the tablets that were not exposed to light, the color of those exposed to light changed over time. In fact, a faster and more pronounced color change was observed in the tablets exposed to light; however, the amount of AB did not decrease significantly in these tablets. The coating materials and their amounts were varied to clarify the materials involved in the color change. Based on the results, titanium dioxide and hypromellose may be involved in the color change process. As titanium dioxide is a photocatalyst, it may induce or promote chemical changes in hypromellose upon light irradiation. Overall, care should be exercised during selection of the coating polymer because titanium dioxide may promote photodegradation of the coatings while protecting the tablet's active ingredient from light.

Crystal-Phase Engineering in Heterogeneous Catalysis

The performance of a chemical reaction is critically dependent on the electronic and/or geometric structures of a material in heterogeneous catalysis. Over the past century, the Sabatier principle has already provided a conceptual framework for optimal catalyst design by adjusting the electronic structure of the catalytic material via a change in composition. Beyond composition, it is essential to recognize that the geometric atomic structures of a catalyst, encompassing terraces, edges, steps, kinks, and corners, have a substantial impact on the activity and selectivity of a chemical reaction. Crystal-phase engineering has the capacity to bring about substantial alterations in the electronic and geometric configurations of a catalyst, enabling control over coordination numbers, morphological features, and the arrangement of surface atoms. Modulating the crystallographic phase is therefore an important strategy for improving the stability, activity, and selectivity of catalytic materials. Nonetheless, a complete understanding of how the performance depends on the crystal phase of a catalyst remains elusive, primarily due to the absence of a molecular-level view of active sites across various crystal phases. In this review, we primarily focus on assessing the dependence of catalytic performance on crystal phases to elucidate the challenges and complexities inherent in heterogeneous catalysis, ultimately aiming for improved catalyst design.

Activating two-dimensional semiconductors for photocatalysis: a cross-dimensional strategy

The emerging two-dimensional (2D) semiconductors substantially extend materials bases for versatile applications such as semiconductor photocatalysis demanding semiconductive matrices and large surface areas. The dimensionality, while endowing 2D semiconductors the unique properties to host photocatalytic functionality of pollutant removal and hydrogen evolution, hurdles the activation paths to form heterogenous photocatalysts where the photochemical processes are normally superior over these on the mono-compositional counterparts. In this perspective, we present a cross-dimensional strategy to employ thenD (n= 0-2) clusters or nanomaterials as activation partners to boost the photocatalytic activities of the 2D semiconductors. The formation principles of heterogenous photocatalysts are illustrated specifically for the 2D matrices, followed by selection criteria of them among the vast 2D database. The computer investigations are illustrated in the density functional theory route and machine learning benefitted from the vast samples in the 2D library. Synthetic realizations and characterizations of the 2D heterogenous systems are introduced with an emphasis on chemical methods and advanced techniques to understand materials and mechanistic studies. The perspective outlooks cross-dimensional activation strategies of the 2D materials for other applications such as CO2removal, and materials matrices in other dimensions which may inspire incoming research within these fields.

The effects of water, substrate, and intermediate adsorption on the photocatalytic decomposition of air pollutants over nano-TiO2 photocatalysts

The photocatalytic performance of nano-TiO2 photocatalysts in air pollutant degradation greatly depends on the adsorption of water, substrates, and intermediates. Especially under excessive humidity, substrate concentration, and intermediate concentration, the competitive adsorption of water, substrates, and intermediates can seriously inhibit the photocatalytic performance. In the past few years, extensive studies have been performed to investigate the influence of humidity, substrate concentration, and intermediates on the photocatalytic performance of TiO2, and significant advances have been made in the area. However, to the best of our knowledge, there is no review focusing on the effects of water, substrate, and intermediate adsorption to date. A comprehensive understanding of their mechanisms is key to overcoming the limited application of nano-TiO2 photocatalysts in the photocatalytic decomposition of air pollutants. In this review, the progress in experimental and theoretical fields, including a recent combination of photocatalytic experiments and adsorption and photocatalytic simulations by density functional theory (DFT), to explore the impact of adsorption of various reaction components on nano-TiO2 photocatalysts is comprehensively summarized. Additionally, the mechanism and broad perspective of the impact of their adsorption on the photocatalytic activity of TiO2 in air treatment are also critically discussed. Finally, several solutions are proposed to resolve the current problems related to environmental factors. In general, this review contributes a comprehensive perspective of water, substrate, and intermediate adsorption toward boosting the photocatalytic application of TiO2 nanomaterials.

Humic substance/metal-oxide multifunctional nanoparticles as advanced antibacterial-antimycotic agents and photocatalysts for the degradation of PLA microplastics under UVA/solar radiation

As a result of the accumulation of plastic in the environment, microplastics have become part of the food chain, boosting the resistance of fungi and bacteria which can frequently encounter human beings. Employing photocatalytic degradation is a possible route towards the removal of chemical and biological pollutants, such as plastics and microplastic wastes as well as microorganisms. Using biowaste materials to design hybrid nanoparticles with enhanced photocatalytic and antimicrobial features would uphold the principles of the circular bioeconomy. Here, two unexpensive semiconductors-namely titanium dioxide (TiO2) and zinc oxide (ZnO) - were synthetized through solvothermal synthesis and combined with humic substances deriving from agrifood biomass. The preparation led to hybrid nanoparticles exhibiting enhanced ROS-generating properties for simultaneous applications as antimicrobial agents against different bacterial and fungal strains and as photoactive catalysts to degrade polylactic acid (PLA) microplastics under UVA and solar irradiation. In comparison to bare nanoparticles, hybrid nanoparticles demonstrated higher antibacterial and antimycotic capabilities toward various pathogenic microorganisms as well as advanced photocatalytic activity in the degradation of PLA with a carbonyl index reduction in the range of 15-23%, thus confirming a noteworthy ability in microplastics photodegradation under UVA and solar irradiation.

Lung carcinogenicity by whole body inhalation exposure to Anatase-type Nano-titanium Dioxide in rats

To investigate the carcinogenicity of anatase-type nano-titanium dioxide (aNTiO2), F344/DuCrlCrlj rats were exposed to aNTiO2 aerosol at concentrations of 0, 0.5, 2, and 8 mg/m3. The rats were divided into 2 groups: carcinogenicity study groups were exposed for two years, and satellite study groups were exposed for one year followed by recovery for 1 day, 26 weeks, and 52 weeks after the end of exposure. In the carcinogenicity groups, bronchiolo-alveolar carcinomas were observed in two 8 mg/m3-exposed males, showing an increasing trend by Peto's test. However, this incidence was at the upper limit of JBRC's historical control data. Bronchiolo-alveolar adenomas were observed in 1, 2, 3, and 4 rats of the 0, 0.5, 2, and 8 mg/m3-exposed females and were not statistically significant. However, the incidence in the 8 mg/m3-exposed females exceeded JBRC's historical control data. Therefore, we conclude there is equivocal evidence for the carcinogenicity of aNTiO2 in rats. No lung tumors were observed in the satellite groups. Particle-induced non-neoplastic lesions (alveolar epithelial hyperplasia and focal fibrosis) were observed in exposed males and females in both the carcinogenicity and satellite groups. Increased lung weight and neutrophils of bronchoalveolar lavage fluid were observed in the 8 mg/m3-exposed carcinogenicity groups. The aNTiO2 deposited in the lungs of the satellite group rats was decreased at 26 weeks after the end of exposure compared to 1 day after the end of exposure. At 52 weeks after the end of exposure, the decreased level was the same at 26 weeks after the end of exposure.

Photochemically enhanced photocatalytic and magnetic properties of TiO2via Co(ii) ion implantation from a Co(ii)–picoline complex

The UV-triggered photocatalytic reaction between the Co(ii)–picoline complex and TiO2 forms Co(ii) sub-surface-implanted TiO2 nanoparticles, demonstrating potential for spintronics and visible-light photocatalysis.

Novel Effective Photocatalytic Self-Cleaning Coatings: TiO2-Polyfluoroalkoxy Coatings Prepared by Suspension Plasma Spraying

Photocatalytic coatings can degrade volatile organic compounds into non-toxic products, which has drawn the attention of scholars around the world. However, the pollution of dust on the coating adversely affects the photocatalytic efficiency and service life of the coating. Here, a series of TiO2-polyfluoroalkoxy (PFA) coatings with different contents of PFA were fabricated by suspension plasma spraying technology. The results demonstrate that the hybrid coatings contain a large number of circular and ellipsoidal nanoparticles and a porous micron-nano structure due to the inclusion of PFA. According to the optimized thermal spraying process parameters, TiO2 nanoparticles were partially melted to retain most of the anatase phases, whereas PFA did not undergo significant carbonization. As compared to the TiO2 coating, the static contact angle of the composite coating doped with 25 wt.% PFA increased from 28.2° to 134.1°. In addition, PFA strongly adsorbs methylene blue, resulting in a greater involvement of methylene blue molecules in the catalyst, where the catalytic rate of hybrid coatings is up to 95%. The presented nanocomposite coatings possess excellent photocatalytic and self-cleaning properties and are expected to find wider practical applications in the field of photocatalysis.

Metastable Ni(I)-TiO2-x Photocatalysts: Self-Amplifying H2 Evolution from Plain Water without Noble Metal Co-Catalyst and Sacrificial Agent

Decoration of semiconductor photocatalysts with cocatalysts is generally done by a step-by-step assembly process. Here, we describe the self-assembling and self-activating nature of a photocatalytic system that forms under illumination of reduced anatase TiO2 nanoparticles in an aqueous Ni2+ solution. UV illumination creates in situ a Ni+/TiO2/Ti3+ photocatalyst that self-activates and, over time, produces H2 at a higher rate. In situ X-ray absorption spectroscopy and electron paramagnetic resonance spectroscopy show that key to self-assembly and self-activation is the light-induced formation of defects in the semiconductor, which enables the formation of monovalent nickel (Ni+) surface states. Metallic nickel states, i.e., Ni0, do not form under the dark (resting state) or under illumination (active state). Once the catalyst is assembled, the Ni+ surface states act as electron relay for electron transfer to form H2 from water, in the absence of sacrificial species or noble metal cocatalysts.

Exploration of the origin of the excellent charge-carrier dynamics in Ruddlesden-Popper oxysulfide perovskite Y2Ti2O5S2

Although the efficient separation of electron-hole (e-h) pairs is one of the most sought-after electronic characteristics of materials, due to thermally induced atomic motion and other factors, they do not remain separated during the carrier transport process, potentially leading to rapid carrier recombination. Here, we utilized real-time time-dependent density functional theory in combination with nonadiabatic molecular dynamics (NAMD) to explore the separated dynamic transport path within Ruddlesden-Popper oxysulfide perovskite Y2Ti2O5S2 caused by the dielectric layer and phonon frequency difference. The underlying origin of the efficient overall water splitting in Y2Ti2O5S2 is systematically explored. We report the existence of the bi-directional e-h separate-path transport, in which, the electrons transport in the Ti2O5 layer and the holes diffuse in the rock-salt layer. This is in contrast to the conventional e-h separated distribution with a crowded transport channel, as observed in SrTiO3 and hybrid perovskites. Such a unique feature finally results in a long carrier lifetime of 321 ns, larger than that in the SrTiO3 perovskite (160 ns) with only one carrier transport channel. This work provides insights into the carrier transport in lead-free perovskites and yields a novel design strategy for next-generation functionalized optoelectronic devices.

Hybrid Photoelectrocatalytic TiO2-Co3O4/Co(OH)2 Materials Prepared from Bio-Based Surfactants for Water Splitting

The development of new photoanode materials for hydrogen production and water treatment is in full progress. In this context, hybrid TiO2-Co3O4/Co(OH)2 photoanodes prepared using the sol-gel method using biosurfactants are currently being developed by our group. The combination of TiO2 with a cobalt-based compound significantly enhances the visible absorption and electrochemical performance of thin films, which is mainly due to an increase in the specific surface area and a decrease in the charge transfer resistance on the surface of the thin films. The formation of these composites allows for a 30-fold increase in the current density when compared to cobalt-free materials, with the best TiO2-CoN0.5 sample achieving a current of 1.570 mA.cm-2 and a theoretical H2 production rate of 0.3 µmol.min-1.cm-2 under xenon illumination.

Control technologies to prevent aerosol-based disease transmission in animal agriculture production settings: a review of established and emerging approaches

Transmission of infectious agents via aerosols is an ever-present concern in animal agriculture production settings, as the aerosol route to disease transmission can lead to difficult-to-control and costly diseases, such as porcine respiratory and reproductive syndrome virus and influenza A virus. It is increasingly necessary to implement control technologies to mitigate aerosol-based disease transmission. Here, we review currently utilized and prospective future aerosol control technologies to collect and potentially inactivate pathogens in aerosols, with an emphasis on technologies that can be incorporated into mechanically driven (forced air) ventilation systems to prevent aerosol-based disease spread from facility to facility. Broadly, we find that control technologies can be grouped into three categories: (1) currently implemented technologies; (2) scaled technologies used in industrial and medical settings; and (3) emerging technologies. Category (1) solely consists of fibrous filter media, which have been demonstrated to reduce the spread of PRRSV between swine production facilities. We review the mechanisms by which filters function and are rated (minimum efficiency reporting values). Category (2) consists of electrostatic precipitators (ESPs), used industrially to collect aerosol particles in higher flow rate systems, and ultraviolet C (UV-C) systems, used in medical settings to inactivate pathogens. Finally, category (3) consists of a variety of technologies, including ionization-based systems, microwaves, and those generating reactive oxygen species, often with the goal of pathogen inactivation in aerosols. As such technologies are typically first tested through varied means at the laboratory scale, we additionally review control technology testing techniques at various stages of development, from laboratory studies to field demonstration, and in doing so, suggest uniform testing and report standards are needed. Testing standards should consider the cost-benefit of implementing the technologies applicable to the livestock species of interest. Finally, we examine economic models for implementing aerosol control technologies, defining the collected infectious particles per unit energy demand.

High-speed mapping of surface charge dynamics using sparse scanning Kelvin probe force microscopy

Unraveling local dynamic charge processes is vital for progress in diverse fields, from microelectronics to energy storage. This relies on the ability to map charge carrier motion across multiple length- and timescales and understanding how these processes interact with the inherent material heterogeneities. Towards addressing this challenge, we introduce high-speed sparse scanning Kelvin probe force microscopy, which combines sparse scanning and image reconstruction. This approach is shown to enable sub-second imaging (>3 frames per second) of nanoscale charge dynamics, representing several orders of magnitude improvement over traditional Kelvin probe force microscopy imaging rates. Bridging this improved spatiotemporal resolution with macroscale device measurements, we successfully visualize electrochemically mediated diffusion of mobile surface ions on a LaAlO3/SrTiO3 planar device. Such processes are known to impact band-alignment and charge-transfer dynamics at these heterointerfaces. Furthermore, we monitor the diffusion of oxygen vacancies at the single grain level in polycrystalline TiO2. Through temperature-dependent measurements, we identify a charge diffusion activation energy of 0.18 eV, in good agreement with previously reported values and confirmed by DFT calculations. Together, these findings highlight the effectiveness and versatility of our method in understanding ionic charge carrier motion in microelectronics or nanoscale material systems.

TiO2 Phase Ratio's Contribution to the Photocatalytic Activity

Photocatalysis is one of the approaches for solving environmental issues derived from extremely harmful pollution caused by industrial dyes, medicine, and heavy metals. Titanium dioxide is among the most promising photocatalytic semiconductors; thus, in this work, TiO2 powders were prepared by a hydrothermal synthesis using titanium tetrachloride TiCl4 as a Ti source. The effect of the hydrochloric acid (HCl) concentration on TiO2 formation was analyzed, in which a thorough morpho-structural analysis was performed employing different analysis methods like XRD, Raman spectroscopy, SEM/TEM, and N2 physisorption. EPR spectroscopy was employed to characterize the paramagnetic defect centers and the photogeneration of reactive oxygen species. Photocatalytic properties were tested by photocatalytic degradation of the rhodamine B (RhB) dye under UV light irradiation and using a solar simulator. The pH value directly influenced the formation of the TiO2 phases; for less acidic conditions, the anatase phase of TiO2 crystallized, with a crystallite size of ≈9 nm. Promising results were observed for TiO2, which contained 76% rutile, showing a 96% degradation of RhB under the solar simulator and 91% under UV light after 90 min irradiation, and the best result showed that the sample with 67% of the anatase phase after 60 min irradiation under the solar simulator had a 99% degradation efficiency.

Stabilizing Metal Halide Perovskites for Solar Fuel Production: Challenges, Solutions, and Future Prospects

Metal halide perovskites (MHPs) are emerging photocatalyst materials that can enable sustainable solar-to-chemical energy conversion by virtue of their broad absorption spectra, effective separation/transport of photogenerated carriers, and solution processability. Although preliminary studies show the excellent photocatalytic activities of MHPs, their intrinsic structural instability due to the low formation energy and soft ionic nature is an open challenge for their practical applications. This review discusses the latest understanding of the stability issue and strategies to overcome this issue for MHP-based photocatalysis. First, the origin of the instability issue at atomic levels and the design rules for robust structures are analyzed and elucidated. This is then followed by presenting several different material design strategies for stability enhancement, including reaction medium modification, material surface protection, structural dimensionality engineering, and chemical composition engineering. Emphases are placed on understanding the effects of these strategies on photocatalytic stability as well as the possible structure-performance correlation. Finally, the possible future research directions for pursuing stable and efficient MHP photocatalysts in order to accelerate their technological maturity on a practical scale are outlined. With that, it is hoped to provide readers a valuable snapshot of this rapidly developing and exciting field.

Preparation of PANI modified TiO2 and characterization under pre- and post- photocatalytic conditions

Polyaniline (PANI) is a promising conducting polymer for surface modification of TiO2 to overcome limitations of the use of visible light and attain increased photocatalytic efficiency for the removal of organic contaminants. In this study, a series of polyaniline modified TiO2 (PANI-TiO2) composites were prepared by using "in-situ" chemical oxidation polymerization method. The composites were systematically characterized by Fourier transform infrared spectroscopy (equipped with an attenuated total reflection accessory, FTIR-ATR), Raman spectroscopy, X-ray diffractometry (XRD), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDAX), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible diffuse reflectance spectroscopy (UV-DRS), photoluminescence spectroscopy (PL), nitrogen (N2) physisorption (Brunauer - Emmett - Teller surface area (SBET) and Barrett-Joyner-Halenda (BJH) pore size analysis), thermogravimetry-derivative thermogravimetry (TG-DTG) techniques. XRD patterns of PANI-TiO2 composites confirmed both the amorphous phase of PANI and the crystalline character of TiO2. TG/DTG analysis complemented the XRD profiles that the interactions between PANI and TiO2 resulted in a more stable PANI-TiO2 matrix. SEM images displayed the dominant morphology as dandelion-like shapes of PANI being more pronounced with increasing PANI ratios in PANI-TiO2 composites. UV-DRS profiles revealed that the band gap energies of the composites were lower than bare TiO2 expressing a shift to the visible light region. Both PL and UV-DRS analyses confirmed the band-gap reduction phenomenon of PANI modification of TiO2. The incorporation of PANI into TiO2 resulted in a reduction of the surface area of TiO2. The composites were subsequently subjected to photocatalytic activity assessment tests using humic acid (HA) as a model of refractory organic matter (RfOM) under simulated solar irradiation (Uyguner-Demirel et al. Environ Sci Pollut Res 30 85626-85638, 2023). The morphological and structural changes attained upon application of photocatalysis were also evaluated by FTIR-ATR, Raman spectroscopy, XRD, and SEM-EDAX methods in a comparable manner. The FTIR-ATR spectral features of PANI, RfOM and all composites displayed peaks with slight shifts under pre- and post- photocatalytic conditions as well as following dark surface interactions. Besides exhibiting noticeable photocatalytic performance, PANI-TiO2 composites were also proven to maintain stability under non-selective oxidation conditions in the presence of a complex organic matrix. The prepared PANI-TiO2 composites overcoming the limitations of UVA light active bare TiO2 photocatalysis could possibly find a beneficial use as potential catalysts in solar photocatalytic applications.

Band edges positions prediction of the of Ag nanocluster-decorated titania surfaces and their relationship to NO and NO2 interaction from first-principles calculations

Metal nanoclusters deposited on oxides have been widely used in photocatalysis playing an important role in the design of model catalysts with applications in heterogeneous catalysis. In particular, we are interested in the potential activity of these cluster-supported systems for the removal of nitrogen oxides either by possible catalytic reduction and/or by their adsorption. In this work, using first-principles methods, we evaluate the main characteristics of Agn (n = 1-4) nanoclusters isolated and deposited on anatase TiO2(101) and rutile TiO2(110) surfaces. Our results indicate that they are preferably adsorbed on rutile surface. The different formation energy at each surface can be explained using a Bader charge analysis. Particularly for Ag4 the lowest formation energy is obtained for tetrahedral geometry while the isolated Ag4 geometry is planar. Small silver deposits placed superficially on titania surfaces modify its electronic structures and improve the conduction band edges positions for possible NO reduction. Band edges positions with respect to the vacuum potential have been studied. The comparison of the conduction band minimum with the reduction potentials of NO/N2O and N2O/N2 shows that they are higher, being Ag3 on rutile and Ag1, Ag2 and Ag4P on anatase better for NO reduction. To complete the analysis, the calculation of work function, energy gap, ionization energy and electron affinity are relevant since they allow the location of semiconductor band edges at point of zero charge. Finally, the adsorption of nitrogen oxides is studied where the NO2 adsorption is favored over NO.