Facile synthesis of polymeric fluorescent organic nanoparticles based on the self-polymerization of dopamine for biological imaging

Polyvinylpyrrolidone/cellulose acetate electrospun composite nanofibres loaded by glycerine and garlic extract with in vitro antibacterial activity and release behaviour test

The antibacterial activity of garlic (Allium sativum) is believed to be due to its organosulfur compounds, which can supposedly be used further in biomedical applications. This paper reported the use of electrospinning to encapsulate a garlic extract and glycerine in nanofibrous mats. Polyvinylpyrrolidone (PVP) and cellulose acetate (CA) were the building blocks of the composite fibres that served as the hydrophilic matrix to encapsulate the garlic extract with glycerine added mainly to improve the mechanical characteristics of the composite fibres. The combinations of the fibres were PVP/CA, PVP/CA/garlic, PVP/CA/glycerine, and PVP/CA/glycerine/garlic. The characterizations included the morphology, chemical interaction, swelling degree, weight loss, acidity level, wettability, in vitro antibacterial test, and release behaviour test. The composite nanofibrous mats were uniform, bead-free with a size ranging from 350 nm to 900 nm. The Fourier-transform infrared spectra proved the presence of the garlic extract and glycerine in the fibres. The swelling degree test showed that the fibrous mats generally did have maximum swelling degrees above 100% except for the PVP/CA fibrous mat, whose maximum value was not achieved within 48 hours. The fibrous mat with glycerine showed generally larger weight loss compared to the fibrous mats without glycerine. The result of the contact angle measurement proved that the composite fibres are all hydrophilic with the PVP/CA/glycerine/garlic fibres being the least hydrophilic. The pH level of the fibre mats was from 3.7 to 4.0 due to the use of acetic acid. The Young's modulus and ultimate tensile strength of the mats were significantly reduced due to the presence of glycerine. The encapsulation of the garlic extract in the fibres did not eliminate the antibacterial activity of the garlic extract, as proven in the in vitro antibacterial test. The release of the garlic extract from the composite PVP/CA/glycerine/garlic fibres was found to be the largest due to the large diameter of the fibres, while the blend of PVP with CA successfully reduced the rate of release due to the insolubility of CA. We successfully encapsulated the garlic extract and glycerine in the PVP/CA nanofibrous mats with antibacterial activity.

Emulsion and miniemulsion techniques in preparation of polymer nanoparticles with versatile characteristics

In recent years, polymer nanoparticles (PNPs) have found their ways into numerous applications extending from electronics to photonics, conducting materials to sensors and medicine to biotechnology. Physical properties and surface morphology of PNPs are the most important parameters that significantly affect on their exploitations and can be controlled through the synthesis process. Emulsion and miniemulsion techniques are among the most efficient and wide-spread methods for preparation of PNPs. The objective of this review is to present and highlight the recent developments in the advanced PNPs with specific properties that are produced through emulsion and miniemulsion processes.

A sandwich-type electrochemical aptasensor for Mycobacterium tuberculosis MPT64 antigen detection using C60NPs decorated N-CNTs/GO nanocomposite coupled with conductive PEI-functionalized metal-organic framework

The present work described a novel sandwich-type electrochemical aptasensor for rapid and sensitive determination of Mycobacterium tuberculosis MPT64 antigen. Herein, a novel carbon nanocomposite composed of fullerene nanoparticles, nitrogen-doped carbon nanotubes and graphene oxide (C₆₀NPs-N-CNTs/GO) was facilely synthesized for the first time, which not only possessed a large specific surface area and excellent conductivity, but also exhibited outstanding inherent electroactive property, and therefore served as nanocarrier and redox nanoprobe simultaneously. Gold nanoparticles (AuNPs) was then uniformly anchored onto the surface of such nanocomposite via Au-N bonds to bind with MPT64 antigen aptamer Ⅱ (MAA Ⅱ), forming the tracer label to realize generation and amplification of electrochemical signal. Additionally, conductive polyethyleneimine (PEI)-functionalized Fe-based metal-organic framework (P-MOF) was used as a sensing platform to absorb bimetallic core-shell Au-Pt nanoparticles (Au@Pt), which could accelerate electron transfer and increase the immobilization of MPT64 antigen aptamer Ⅰ (MAA Ⅰ). After the typical sandwich-type protein-aptamer recognition, the inherent electroactivity of the tracer label was provoked by tetraoctylammonium bromide (TOAB), leading to a well-defined current response. Under the optimum condition, the proposed aptasensor showed a wide linear range for MPT64 detection from 1 fg/mL to 1 ng/mL with a limit of detection (LOD) as low as 0.33 fg/mL. More importantly, it was successfully used for MPT64 antigen detection in human serum, exhibiting a promising prospect for TB diagnosis in clinical practice.

Mussel-Inspired Polydopamine Coating: A General Strategy To Enhance Osteogenic Differentiation and Osseointegration for Diverse Implants

Surface modifications play an important role in endowing implant surface with excellent biocompatibility and bioactivity. Among the bioinspired surface modifications, the mussel-inspired polydopamine (PDA) has aroused great interest of researchers. Herein, we fabricated PDA on diverse implant surfaces, including biopolymer, biometal, and bioceramic. Then the effects of PDA coating on cell responsive behaviors in vitro and bone formation capacity in vivo were evaluated in detail. The results showed that PDA coating was fabricated on diverse samples surface successfully, which could significantly improve the hydrophilicity of different material surfaces. Furthermore, the results indicated that PDA coating exerted direct enhancing on the adhesion, proliferation and osteogenic differentiation of bone marrow derived mesenchymal stromal cells (BMSCs) through FAK and p38 signaling pathways. During the process, the focal adhesion protein expression and osteogenic-related genes expression level (e.g., ALP, BMP2, BSP, and OPN) were considerably upregulated. Most importantly, the in vivo study confirmed that PDA coating remarkably accelerated new bone formation and enhanced osseointegration performance. Our study uncovered the biological responses stimulated by PDA coating to make a better understanding of cell/tissue-PDA interactions and affirmed that PDA, a bioinspired polymer, has great potential as a candidate and functional bioactive coating medium in bone regeneration and orthopedic application.

Fabrication of Microcapsules by the Combination of Biomass Porous Carbon and Polydopamine for Dual Self-Healing Hydrogels

Artificial development of smart materials from agricultural waste or food residues is particularly desirable for green chemistry. In this paper, dual-network self-healing hydrogels were successfully fabricated by using functional microcapsules. These microcapsules were established by biomass porous carbon (PC) after recycling of apple residues. Glutaraldehyde (GA) as the healing agent was embedded in the porous carbon, and the outer surface was coated with polydopamine (PDA). After the microcapsules were added, modifying guar gum-type hydrogels were successfully obtained with dual self-healing performance by the combination of a healing agent and metal-ligand coordination. The self-healing efficiency was about 89.9% from the tension test, and the fracture strength was measured as 7.68 MPa. These results not only highlight a new idea for the utilization of apple residues but also provide a new method for the preparation of excellent self-healing hydrogels.

Engineering nanomaterials for water and wastewater treatment: review of classifications, properties and applications

Based on their characteristics and applicability, a new category of NMs is proposed for water and wastewater treatment.

Organic Fluorescent Dye-based Nanomaterials: Advances in the Rational Design for Imaging and Sensing Applications

Self-assembled fluorescent nanomaterials based on small-molecule organic dyes are gaining increasing popularity in imaging and sensing applications over the past decade. This is primarily due to their ability to combine spectral properties tunability and biocompatibility of small molecule organic fluorophores with brightness, chemical and colloidal stability of inorganic materials. Such a unique combination of features comes with rich versatility of dye-based nanomaterials: from aggregates of small molecules to sophisticated core-shell nanoarchitectures involving hyperbranched polymers. Along with the ongoing discovery of new materials and better ways of their synthesis, it is very important to continue systematic studies of fundamental factors that regulate the key properties of fluorescent nanomaterials: their size, polydispersity, colloidal stability, chemical stability, absorption and emission maxima, biocompatibility, and interactions with biological interfaces. In this review, we focus on the systematic description of various types of organic fluorescent nanomaterials, approaches to their synthesis, and ways to optimize and control their characteristics. The discussion is built on examples from reports on recent advances in the design and applications of such materials. Conclusions made from this analysis allow a perspective on future development of fluorescent nanomaterials design for biomedical and related applications.

Facile preparation of graphitic-C3N4 quantum dots for application in two-photon imaging

A novel one-step method for the preparation of g-C₃N₄ QDs for effective two-photon imaging.

Defect-Induced Fluorescence of Silica Nanoparticles for Bioimaging Applications

With biocompatibility, biodegradability, and high functionality, silica nanoparticles (SNPs) have been widely investigated for various biomedical applications. However, lack of optical fluorescence has limited the application of SNPs as a degradable imaging agent. Here, we hydrothermally synthesized fluorescent SNPs by artificially generating optically active defect centers using tetraethyl orthosilicate and (3-aminopropyl)trimethoxysilane. The synthesized SNPs demonstrated strong blue photoluminescence originating from the dioxasilyrane (=Si(O₂)) and silylene (=Si:) defect centers with the aid of aminopropyl groups. Furthermore, phosphorescence was observed at 459 nm, indicating the presence of silylene in SNPs. Finally, these SNPs have been successfully utilized as a fluorescent probe for bioimaging of normal, cancer, and macrophage cells.

One-pot ultrafast preparation of silica quantum dots and their utilization for fabrication of luminescent mesoporous silica nanoparticles

Silica quantum dots (SiQDs) and their luminescent composites have displayed great potential for biomedical applications owing to their chemical inert and low cost. In this work, we report a facile, cost-effective and ultrafast strategy to prepare a stable luminescent SiQDs using N-[3-(trimethoxysilyl)propyl]ethylenediamine (EDAS) and salicylaldehyde as precursors for the first time. These luminescent SiQDs were further utilized for fabrication of luminescent mesoporous silica nanoparticles (MSNs) through direct encapsulation of SiQDs by MSNs. The novel synthetic and modified SiQDs uses commercial raw materials and the entire reaction can be completed within 30 s. The successful preparation of SiQDs and SiQDs@MSNs were characterized by various characterization equipments. The cell viability as well as cell uptake behavior of SiQDs@MSNs were also examined to evaluate their potential for biomedical applications. We demonstrated that these SiQDs@MSNs are low toxicity and of great potential for biological imaging. Based on the above results, we believe that these SiQDs@MSNs should be novel and promising candidates for biomedical applications owing to their intense fluorescence, biocompatibility and high specific surface areas.

Carbon nanoparticles suspension injection for the delivery of doxorubicin: Comparable efficacy and reduced toxicity

Drug delivery systems for doxorubicin (DOX) have attracted tremendous interest nowadays for the improved efficacy and/or reduced toxicity. Due to the aromatic structures and hydrophobic domains, carbon nanoparticle suspension injection (CNSI), a clinical applied reagent for lymph node mapping, strongly adsorbs DOX and holds great potential in cancer therapy. Herein, we evaluated the therapeutic effects of CNSI-DOX to establish its delivery applications for cancer drugs. CNSI adsorbed DOX from solution quickly after the mixing, and the release of DOX from CNSI followed a pH-dependent way. CNSI-DOX and free DOX had nearly identical inhibitive effects on cancer cells, while the vehicle CNSI was nontoxic. CNSI-DOX largely prolonged the life span of ascites tumor bearing mice after the intraperitoneally injection and the ascites weights showed significant decreases. CNSI-DOX also inhibited the growth of subcutaneous xenografts following the same administration route. The therapeutic efficacy of CNSI-DOX was similar to that of free DOX in ascites tumor model, but slightly lower in subcutaneous xenografts model. The advantage of using CNSI was majorly reflected by the reduced toxicity of DOX according to the bodyweight changes, serum biochemical indicators and histopathological observations. The LD₅₀ (median lethal dose) value of CNSI-DOX was 43.8 mg/kg bodyweight, nearly three times of that of free DOX (15.2 mg/kg bodyweight). Our results suggested that CNSI might be used for DOX delivery through "off label" use to benefit the patients immediately.