Breeder friendly phenotyping

High-throughput field phenotyping reveals genetic variation in photosynthetic traits in durum wheat under drought

Chlorophyll fluorescence (ChlF) is a powerful non-invasive technique for probing photosynthesis. Although proposed as a method for drought tolerance screening, ChlF has not yet been fully adopted in physiological breeding, mainly due to limitations in high-throughput field phenotyping capabilities. The light-induced fluorescence transient (LIFT) sensor has recently been shown to reliably provide active ChlF data for rapid and remote characterisation of plant photosynthetic performance. We used the LIFT sensor to quantify photosynthesis traits across time in a large panel of durum wheat genotypes subjected to a progressive drought in replicated field trials over two growing seasons. The photosynthetic performance was measured at the canopy level by means of the operating efficiency of Photosystem II ( Fq'/Fm' ) and the kinetics of electron transport measured by reoxidation rates ( Fr1' and Fr2' ). Short- and long-term changes in ChlF traits were found in response to soil water availability and due to interactions with weather fluctuations. In mild drought, Fq'/Fm' and Fr2' were little affected, while Fr1' was consistently accelerated in water-limited compared to well-watered plants, increasingly so with rising vapour pressure deficit. This high-throughput approach allowed assessment of the native genetic diversity in ChlF traits while considering the diurnal dynamics of photosynthesis.

R. Patiranage D, Johansen K, Schmöckel SM, Bertero D, Oakey H, Colque-Little C, Afzal I, Raubach S, Miller N, Streich J, Amby DB, Emrani N, Warmington M, Mousa MAA, Wu D, Jacobson D, Andreasen C, Jung C, Murphy K, Bazile D, Tester M. Quinoa Phenotyping Methodologies: An International Consensus

Quinoa is a crop originating in the Andes but grown more widely and with the genetic potential for significant further expansion. Due to the phenotypic plasticity of quinoa, varieties need to be assessed across years and multiple locations. To improve comparability among field trials across the globe and to facilitate collaborations, components of the trials need to be kept consistent, including the type and methods of data collected. Here, an internationally open-access framework for phenotyping a wide range of quinoa features is proposed to facilitate the systematic agronomic, physiological and genetic characterization of quinoa for crop adaptation and improvement. Mature plant phenotyping is a central aspect of this paper, including detailed descriptions and the provision of phenotyping cards to facilitate consistency in data collection. High-throughput methods for multi-temporal phenotyping based on remote sensing technologies are described. Tools for higher-throughput post-harvest phenotyping of seeds are presented. A guideline for approaching quinoa field trials including the collection of environmental data and designing layouts with statistical robustness is suggested. To move towards developing resources for quinoa in line with major cereal crops, a database was created. The Quinoa Germinate Platform will serve as a central repository of data for quinoa researchers globally.

Uncovering candidate genes involved in photosynthetic capacity using unexplored genetic variation in Spring Wheat

To feed an ever-increasing population we must leverage advances in genomics and phenotyping to harness the variation in wheat breeding populations for traits like photosynthetic capacity which remains unoptimized. Here we survey a diverse set of wheat germplasm containing elite, introgression and synthetic derivative lines uncovering previously uncharacterized variation. We demonstrate how strategic integration of exotic material alleviates the D genome genetic bottleneck in wheat, increasing SNP rate by 62% largely due to Ae. tauschii synthetic wheat donors. Across the panel, 67% of the Ae. tauschii donor genome is represented as introgressions in elite backgrounds. We show how observed genetic variation together with hyperspectral reflectance data can be used to identify candidate genes for traits relating to photosynthetic capacity using association analysis. This demonstrates the value of genomic methods in uncovering hidden variation in wheat and how that variation can assist breeding efforts and increase our understanding of complex traits.

Harnessing translational research in wheat for climate resilience

Despite being the world's most widely grown crop, research investments in wheat (Triticum aestivum and Triticum durum) fall behind those in other staple crops. Current yield gains will not meet 2050 needs, and climate stresses compound this challenge. However, there is good evidence that heat and drought resilience can be boosted through translating promising ideas into novel breeding technologies using powerful new tools in genetics and remote sensing, for example. Such technologies can also be applied to identify climate resilience traits from among the vast and largely untapped reserve of wheat genetic resources in collections worldwide. This review describes multi-pronged research opportunities at the focus of the Heat and Drought Wheat Improvement Consortium (coordinated by CIMMYT), which together create a pipeline to boost heat and drought resilience, specifically: improving crop design targets using big data approaches; developing phenomic tools for field-based screening and research; applying genomic technologies to elucidate the bases of climate resilience traits; and applying these outputs in developing next-generation breeding methods. The global impact of these outputs will be validated through the International Wheat Improvement Network, a global germplasm development and testing system that contributes key productivity traits to approximately half of the global wheat-growing area.

Evaluation of RGB and Multispectral Unmanned Aerial Vehicle (UAV) Imagery for High-Throughput Phenotyping and Yield Prediction in Barley Breeding

With advances in plant genomics, plant phenotyping has become a new bottleneck in plant breeding and the need for reliable high-throughput plant phenotyping techniques has emerged. In the face of future climatic challenges, it does not seem appropriate to continue to solely select for grain yield and a few agronomically important traits. Therefore, new sensor-based high-throughput phenotyping has been increasingly used in plant breeding research, with the potential to provide non-destructive, objective and continuous plant characterization that reveals the formation of the final grain yield and provides insights into the physiology of the plant during the growth phase. In this context, we present the comparison of two sensor systems, Red-Green-Blue (RGB) and multispectral cameras, attached to unmanned aerial vehicles (UAV), and investigate their suitability for yield prediction using different modelling approaches in a segregating barley introgression population at three environments with weekly data collection during the entire vegetation period. In addition to vegetation indices, morphological traits such as canopy height, vegetation cover and growth dynamics traits were used for yield prediction. Repeatability analyses and genotype association studies of sensor-based traits were compared with reference values from ground-based phenotyping to test the use of conventional and new traits for barley breeding. The relative height estimation of the canopy by UAV achieved high precision (up to r = 0.93) and repeatability (up to R2 = 0.98). In addition, we found a great overlap of detected significant genotypes between the reference heights and sensor-based heights. The yield prediction accuracy of both sensor systems was at the same level and reached a maximum prediction accuracy of r2 = 0.82 with a continuous increase in precision throughout the entire vegetation period. Due to the lower costs and the consumer-friendly handling of image acquisition and processing, the RGB imagery seems to be more suitable for yield prediction in this study.

Breeding for drought and heat tolerance in wheat

Many approaches have been adopted to enhance the heat and drought tolerance of wheat with mixed success. An assessment of the relative merits of different strategies is presented. Wheat is the most widely grown crop globally and plays a key role in human nutrition. However, it is grown in environments that are prone to heat and drought stress, resulting in severely reduced yield in some seasons. Increased climate variability is expected to have a particularly adverse effect of wheat production. Breeding for stable yield across both good and bad seasons while maintaining high yield under optimal conditions is a high priority for most wheat breeding programs and has been a focus of research activities. Multiple strategies have been explored to enhance the heat and drought tolerance of wheat including extensive genetic analysis and modify the expression of genes involved in stress responses, targeting specific physiological traits and direct selection under a range of stress scenarios. These approaches have been combined with improvements in phenotyping, the development of genetic and genomic resources, and extended screening and analysis techniques. The results have greatly expanded our knowledge and understanding of the factors that influence yield under stress, but not all have delivered the hoped-for progress. Here, we provide an overview of the different strategies and an assessment of the most promising approaches.

Root-omics for drought tolerance in cool-season grain legumes

Root traits can be exploited to increase the physiological efficiency of crop water use under drought. Root length, root hairs, root branching, root diameter, and root proliferation rate are genetically defined traits that can help to improve the water productivity potential of crops. Recently, high-throughput phenotyping techniques/platforms have been used to screen the germplasm of major cool-season grain legumes for root traits and their impact on different physiological processes, including nutrient uptake and yield potential. Advances in omics approaches have led to the dissection of genomic, proteomic, and metabolomic structures of these traits. This knowledge facilitates breeders to improve the water productivity and nutrient uptake of cultivars under limited soil moisture conditions in major cool-season grain legumes that usually face terminal drought. This review discusses the advances in root traits and their potential for developing drought-tolerant cultivars in cool-season grain legumes.

Addressing Research Bottlenecks to Crop Productivity

Asymmetry of investment in crop research leads to knowledge gaps and lost opportunities to accelerate genetic gain through identifying new sources and combinations of traits and alleles. On the basis of consultation with scientists from most major seed companies, we identified several research areas with three common features: (i) relatively underrepresented in the literature; (ii) high probability of boosting productivity in a wide range of crops and environments; and (iii) could be researched in 'precompetitive' space, leveraging previous knowledge, and thereby improving models that guide crop breeding and management decisions. Areas identified included research into hormones, recombination, respiration, roots, and source-sink, which, along with new opportunities in phenomics, genomics, and bioinformatics, make it more feasible to explore crop genetic resources and improve breeding strategies.

Scaling up high-throughput phenotyping for abiotic stress selection in the field

High-throughput phenotyping (HTP) is in its infancy for deployment in large-scale breeding programmes. With the ability to measure correlated traits associated with physiological ideotypes, in-field phenotyping methods are available for screening of abiotic stress responses. As cropping environments become more hostile and unpredictable due to the effects of climate change, the need to characterise variability across spatial and temporal scales will become increasingly important. The sensor technologies that have enabled HTP from macroscopic through to satellite sensors may also be utilised here to complement spatial characterisation using envirotyping, which can improve estimations of genotypic performance across environments by better accounting for variation at the plot, trial and inter-trial levels. Climate change is leading to increased variation at all physical and temporal scales in the cropping environment. Maintaining yield stability under circumstances with greater levels of abiotic stress while capitalising upon yield potential in good years, requires approaches to plant breeding that target the physiological limitations to crop performance in specific environments. This requires dynamic modelling of conditions within target populations of environments, GxExM predictions, clustering of environments so breeding trajectories can be defined, and the development of screens that enable selection for genetic gain to occur. High-throughput phenotyping (HTP), combined with related technologies used for envirotyping, can help to address these challenges. Non-destructive analysis of the morphological, biochemical and physiological qualities of plant canopies using HTP has great potential to complement whole-genome selection, which is becoming increasingly common in breeding programmes. A range of novel analytic techniques, such as machine learning and deep learning, combined with a widening range of sensors, allow rapid assessment of large breeding populations that are repeatable and objective. Secondary traits underlying radiation use efficiency and water use efficiency can be screened with HTP for selection at the early stages of a breeding programme. HTP and envirotyping technologies can also characterise spatial variability at trial and within-plot levels, which can be used to correct for spatial variations that confound measurements of genotypic values. This review explores HTP for abiotic stress selection through a physiological trait lens and additionally investigates the use of envirotyping and EC to characterise spatial variability at all physical scales in METs.

Host plant resistance in wheat to barley yellow dwarf viruses and their aphid vectors: a review

Cereal aphids are vectors of at least 11 species of Barley Yellow Dwarf Viruses (BYDV) in wheat that alone and/or in combination can cause between 5%-80% grain yield losses. They establish complex virus-vector interactions, with variations in specificity and transmission efficiency that need to be considered for control purposes. In general, these viruses and vectors have a global distribution, however, BYDV-PAV is the most prevalent and abundant virus species worldwide, likely due to its vectoring efficiency and the wide distribution of its primary vector Rhopalosiphum padi. Host plant resistance (HPR) is an environmentally friendly, efficient and cost-effective tool to reduce crop losses to biotic stressors such as aphids and viruses. Finding resistance sources is paramount to breed for HPR. Currently, most of the resistance identified for aphids and BYDV derives from wheat related and wild relative species. However, breeding for HPR to BYDV and its vectors has additional challenges besides the source identification, for example, the lack of selection tools for certain aphid species, which likely prevents the development of elite wheat germplasm carrying resistance to these constraints. Nonetheless, modern technologies such as high-throughput phenotyping, genomic and advanced statistical tools can contribute to make HPR to aphids and BYDV more efficient. In the present review we describe the main sources of resistance, discuss the challenges and opportunities for incorporating the resistance in wheat breeding programs and present a workflow to breed for BYDV and its vectors in wheat.

Impact of Varying Light and Dew on Ground Cover Estimates from Active NDVI, RGB, and LiDAR

Canopy ground cover (GC) is an important agronomic measure for evaluating crop establishment and early growth. This study evaluates the reliability of GC estimates, in the presence of varying light and dew on leaves, from three different ground-based sensors: (1) normalized difference vegetation index (NDVI) from the commercially available GreenSeeker®; (2) RGB images from a digital camera, where GC was determined as the portion of pixels from each image meeting a greenness criterion (i.e., (Green - Red)/(Green + Red) > 0); and (3) LiDAR using two separate approaches: (a) GC from LiDAR red reflectance (whereby red reflectance less than five was classified as vegetation) and (b) GC from LiDAR height (whereby height greater than 10 cm was classified as vegetation). Hourly measurements were made early in the season at two different growth stages (tillering and stem elongation), among wheat genotypes highly diverse for canopy characteristics. The active NDVI showed the least variation through time and was particularly stable, regardless of the available light or the presence of dew. In addition, between-sample-time Pearson correlations for NDVI were consistently high and significant (P < 0.0001), ranging from 0.89 to 0.98. In comparison, GC from LiDAR and RGB showed greater variation across sampling times, and LiDAR red reflectance was strongly influenced by the presence of dew. Excluding times when the light was exceedingly low, correlations between GC from RGB and NDVI were consistently high (ranging from 0.79 to 0.92). The high reliability of the active NDVI sensor potentially affords a high degree of flexibility for users by enabling sampling across a broad range of acceptable light conditions.

Field-based remote sensing models predict radiation use efficiency in wheat

Wheat yields are stagnating or declining in many regions, requiring efforts to improve the light conversion efficiency, known as radiation use efficiency (RUE). RUE is a key trait in plant physiology because it links light capture and primary metabolism with biomass accumulation and yield, but its measurement is time consuming and this has limited its use in fundamental research and large-scale physiological breeding. In this study, high-throughput plant phenotyping (HTPP) approaches were used among a population of field-grown wheat with variation in RUE and photosynthetic traits to build predictive models of RUE, biomass, and intercepted photosynthetically active radiation (IPAR). Three approaches were used: best combination of sensors; canopy vegetation indices; and partial least squares regression. The use of remote sensing models predicted RUE with up to 70% accuracy compared with ground truth data. Water indices and canopy greenness indices [normalized difference vegetation index (NDVI), enhanced vegetation index (EVI)] are the better option to predict RUE, biomass, and IPAR, and indices related to gas exchange, non-photochemical quenching [photochemical reflectance index (PRI)] and senescence [structural-insensitive pigment index (SIPI)] are better predictors for these traits at the vegetative and grain-filling stages, respectively. These models will be instrumental to explain canopy processes, improve crop growth and yield modelling, and potentially be used to predict RUE in different crops or ecosystems.

Genomic Selection in Tropical Forage Grasses: Current Status and Future Applications

The world population is expected to be larger and wealthier over the next few decades and will require more animal products, such as milk and beef. Tropical regions have great potential to meet this growing global demand, where pasturelands play a major role in supporting increased animal production. Better forage is required in consonance with improved sustainability as the planted area should not increase and larger areas cultivated with one or a few forage species should be avoided. Although, conventional tropical forage breeding has successfully released well-adapted and high-yielding cultivars over the last few decades, genetic gains from these programs have been low in view of the growing food demand worldwide. To guarantee their future impact on livestock production, breeding programs should leverage genotyping, phenotyping, and envirotyping strategies to increase genetic gains. Genomic selection (GS) and genome-wide association studies play a primary role in this process, with the advantage of increasing genetic gain due to greater selection accuracy, reduced cycle time, and increased number of individuals that can be evaluated. This strategy provides solutions to bottlenecks faced by conventional breeding methods, including long breeding cycles and difficulties to evaluate complex traits. Initial results from implementing GS in tropical forage grasses (TFGs) are promising with notable improvements over phenotypic selection alone. However, the practical impact of GS in TFG breeding programs remains unclear. The development of appropriately sized training populations is essential for the evaluation and validation of selection markers based on estimated breeding values. Large panels of single-nucleotide polymorphism markers in different tropical forage species are required for multiple application targets at a reduced cost. In this context, this review highlights the current challenges, achievements, availability, and development of genomic resources and statistical methods for the implementation of GS in TFGs. Additionally, the prediction accuracies from recent experiments and the potential to harness diversity from genebanks are discussed. Although, GS in TFGs is still incipient, the advances in genomic tools and statistical models will speed up its implementation in the foreseeable future. All TFG breeding programs should be prepared for these changes.

Small "Nested" Introgressions from Wild Thinopyrum Species, Conferring Effective Resistance to Fusarium Diseases, Positively Impact Durum Wheat Yield Potential

Today wheat cultivation is facing rapidly changing climate scenarios and yield instability, aggravated by the spreading of severe diseases such as Fusarium head blight (FHB) and Fusarium crown rot (FCR). To obtain productive genotypes resilient to stress pressure, smart breeding approaches must be envisaged, including the exploitation of wild relatives. Here we report on the assessment of the breeding potential of six durum wheat-Thinopyrum spp. recombinant lines (RLs) obtained through chromosome engineering. They are characterized by having 23% or 28% of their 7AL chromosome arm replaced by a "nested" alien segment, composed of homoeologous group 7 chromosome fractions from Th. ponticum and Th. elongatum (=7el1L + 7EL) or from different Th. ponticum accessions (=7el1L + 7el2L). In addition to the 7el1L genes Lr19 + Yp (leaf rust resistance, and yellow pigment content, respectively), these recombinant lines (RLs) possess a highly effective QTL for resistance to FHB and FCR within their 7el2L or 7EL portion. The RLs, their null segregants and well-adapted and productive durum wheat cultivars were evaluated for 16 yield-related traits over two seasons under rainfed and irrigated conditions. The absence of yield penalties and excellent genetic stability of RLs was revealed in the presence of all the alien segment combinations. Both 7el2L and 7EL stacked introgressions had positive impacts on source and sink yield traits, as well as on the overall performance of RLs in conditions of reduced water availability. The four "nested" RLs tested in 2020 were among the top five yielders, overall representing good candidates to be employed in breeding programs to enhance crop security and safety.

Assessing the Effect of Drought on Winter Wheat Growth Using Unmanned Aerial System (UAS)-Based Phenotyping

Drought significantly limits wheat productivity across the temporal and spatial domains. Unmanned Aerial Systems (UAS) has become an indispensable tool to collect refined spatial and high temporal resolution imagery data. A 2-year field study was conducted in 2018 and 2019 to determine the temporal effects of drought on canopy growth of winter wheat. Weekly UAS data were collected using red, green, and blue (RGB) and multispectral (MS) sensors over a yield trial consisting of 22 winter wheat cultivars in both irrigated and dryland environments. Raw-images were processed to compute canopy features such as canopy cover (CC) and canopy height (CH), and vegetation indices (VIs) such as Normalized Difference Vegetation Index (NDVI), Excess Green Index (ExG), and Normalized Difference Red-edge Index (NDRE). The drought was more severe in 2018 than in 2019 and the effects of growth differences across years and irrigation levels were visible in the UAS measurements. CC, CH, and VIs, measured during grain filling, were positively correlated with grain yield (r = 0.4–0.7, p < 0.05) in the dryland in both years. Yield was positively correlated with VIs in 2018 (r = 0.45–0.55, p < 0.05) in the irrigated environment, but the correlations were non-significant in 2019 (r = 0.1 to −0.4), except for CH. The study shows that high-throughput UAS data can be used to monitor the drought effects on wheat growth and productivity across the temporal and spatial domains.

High Throughput Field Phenotyping for Plant Height Using UAV-Based RGB Imagery in Wheat Breeding Lines: Feasibility and Validation

Plant height (PH) is an essential trait in the screening of most crops. While in crops such as wheat, medium stature helps reduce lodging, tall plants are preferred to increase total above-ground biomass. PH is an easy trait to measure manually, although it can be labor-intense depending on the number of plots. There is an increasing demand for alternative approaches to estimate PH in a higher throughput mode. Crop surface models (CSMs) derived from dense point clouds generated via aerial imagery could be used to estimate PH. This study evaluates PH estimation at different phenological stages using plot-level information from aerial imaging-derived 3D CSM in wheat inbred lines during two consecutive years. Multi-temporal and high spatial resolution images were collected by fixed-wing (P l a t F W ) and multi-rotor (P l a t M R ) unmanned aerial vehicle (UAV) platforms over two wheat populations (50 and 150 lines). The PH was measured and compared at four growth stages (GS) using ground-truth measurements (PHground) and UAV-based estimates (PHaerial). The CSMs generated from the aerial imagery were validated using ground control points (GCPs) as fixed reference targets at different heights. The results show that PH estimations using P l a t F W were consistent with those obtained from P l a t M R , showing some slight differences due to image processing settings. The GCPs heights derived from CSM showed a high correlation and low error compared to their actual heights (R 2 ≥ 0.90, RMSE ≤ 4 cm). The coefficient of determination (R 2) between PHground and PHaerial at different GS ranged from 0.35 to 0.88, and the root mean square error (RMSE) from 0.39 to 4.02 cm for both platforms. In general, similar and higher heritability was obtained using PHaerial across different GS and years and ranged according to the variability, and environmental error of the PHground observed (0.06-0.97). Finally, we also observed high Spearman rank correlations (0.47-0.91) and R 2 (0.63-0.95) of PHaerial adjusted and predicted values against PHground values. This study provides an example of the use of UAV-based high-resolution RGB imagery to obtain time-series estimates of PH, scalable to tens-of-thousands of plots, and thus suitable to be applied in plant wheat breeding trials.

The Haplotype-Based Analysis of Aegilops tauschii Introgression Into Hard Red Winter Wheat and Its Impact on Productivity Traits

The introgression from wild relatives have a great potential to broaden the availability of beneficial allelic diversity for crop improvement in breeding programs. Here, we assessed the impact of the introgression from 21 diverse accessions of Aegilops tauschii, the diploid ancestor of the wheat D genome, into 6 hard red winter wheat cultivars on yield and yield component traits. We used 5.2 million imputed D genome SNPs identified by the whole-genome sequencing of parental lines and the sequence-based genotyping of introgression population, including 351 BC₁F_3:5 lines. Phenotyping data collected from the irrigated and non-irrigated field trials revealed that up to 23% of the introgression lines (ILs) produce more grain than the parents and check cultivars. Based on 16 yield stability statistics, the yield of 12 ILs (3.4%) was stable across treatments, years, and locations; 5 of these lines were also high yielding lines, producing 9.8% more grain than the average yield of check cultivars. The most significant SNP- and haplotype-trait associations were identified on chromosome arms 2DS and 6DL for the spikelet number per spike (SNS), on chromosome arms 2DS, 3DS, 5DS, and 7DS for grain length (GL) and on chromosome arms 1DL, 2DS, 6DL, and 7DS for grain width (GW). The introgression of haplotypes from A. tauschii parents was associated with an increase in SNS, which was positively correlated with a heading date (HD), whereas the haplotypes from hexaploid wheat parents were associated with an increase in GW. We show that the haplotypes on 2DS associated with an increase in the spikelet number and HD are linked with multiple introgressed alleles of Ppd-D1 identified by the whole-genome sequencing of A. tauschii parents. Meanwhile, some introgressed haplotypes exhibited significant pleiotropic effects with the direction of effects on the yield component traits being largely consistent with the previously reported trade-offs, there were haplotype combinations associated with the positive trends in yield. The characterized repertoire of the introgressed haplotypes derived from A. tauschii accessions with the combined positive effects on yield and yield component traits in elite germplasm provides a valuable source of alleles for improving the productivity of winter wheat by optimizing the contribution of component traits to yield.

Can We Harness "Enviromics" to Accelerate Crop Improvement by Integrating Breeding and Agronomy?

The diverse consequences of genotype-by-environment (GxE) interactions determine trait phenotypes across levels of biological organization for crops, challenging our ambition to predict trait phenotypes from genomic information alone. GxE interactions have many implications for optimizing both genetic gain through plant breeding and crop productivity through on-farm agronomic management. Advances in genomics technologies have provided many suitable predictors for the genotype dimension of GxE interactions. Emerging advances in high-throughput proximal and remote sensor technologies have stimulated the development of "enviromics" as a community of practice, which has the potential to provide suitable predictors for the environment dimension of GxE interactions. Recently, several bespoke examples have emerged demonstrating the nascent potential for enhancing the prediction of yield and other complex trait phenotypes of crop plants through including effects of GxE interactions within prediction models. These encouraging results motivate the development of new prediction methods to accelerate crop improvement. If we can automate methods to identify and harness suitable sets of coordinated genotypic and environmental predictors, this will open new opportunities to upscale and operationalize prediction of the consequences of GxE interactions. This would provide a foundation for accelerating crop improvement through integrating the contributions of both breeding and agronomy. Here we draw on our experience from improvement of maize productivity for the range of water-driven environments across the US corn-belt. We provide perspectives from the maize case study to prioritize promising opportunities to further develop and automate "enviromics" methodologies to accelerate crop improvement through integrated breeding and agronomic approaches for a wider range of crops and environmental targets.

Using Machine Learning to Develop a Fully Automated Soybean Nodule Acquisition Pipeline (SNAP)

Nodules form on plant roots through the symbiotic relationship between soybean (Glycine max L. Merr.) roots and bacteria (Bradyrhizobium japonicum) and are an important structure where atmospheric nitrogen (N₂) is fixed into bioavailable ammonia (NH₃) for plant growth and development. Nodule quantification on soybean roots is a laborious and tedious task; therefore, assessment is frequently done on a numerical scale that allows for rapid phenotyping, but is less informative and suffers from subjectivity. We report the Soybean Nodule Acquisition Pipeline (SNAP) for nodule quantification that combines RetinaNet and UNet deep learning architectures for object (i.e., nodule) detection and segmentation. SNAP was built using data from 691 unique roots from diverse soybean genotypes, vegetative growth stages, and field locations and has a good model fit (R ² = 0.99). SNAP reduces the human labor and inconsistencies of counting nodules, while acquiring quantifiable traits related to nodule growth, location, and distribution on roots. The ability of SNAP to phenotype nodules on soybean roots at a higher throughput enables researchers to assess the genetic and environmental factors, and their interactions on nodulation from an early development stage. The application of SNAP in research and breeding pipelines may lead to more nitrogen use efficiency for soybean and other legume species cultivars, as well as enhanced insight into the plant-Bradyrhizobium relationship.

Field Phenomics: Will It Enable Crop Improvement?

Field phenomics has been identified as a promising enabling technology to assist plant breeders with the development of improved cultivars for farmers. Yet, despite much investment, there are few examples demonstrating the application of phenomics within a plant breeding program. We review recent progress in field phenomics and highlight the importance of targeting breeders' needs, rather than perceived technology needs, through developing and enhancing partnerships between phenomics researchers and plant breeders.

Image-Based High-Throughput Phenotyping of Cereals Early Vigor and Weed-Competitiveness Traits

Cereals grains are the prime component of the human diet worldwide. To promote food security and sustainability, new approaches to non-chemical weed control are needed. Early vigor cultivars with enhanced weed-competitiveness ability are a potential tool, nonetheless, the introduction of such trait in breeding may be a long and labor-intensive process. Here, two image-driven plant phenotyping methods were evaluated to facilitate effective and accurate selection for early vigor in cereals. For that purpose, two triticale genotypes differentiating in vigor and growth rate early in the season were selected as model plants: X-1010 (high) and Triticale1 (low). Two modeling approaches, 2-D and 3-D, were applied on the plants offering an evaluation of various morphological growth parameters for the triticale canopy development, under controlled and field conditions. The morphological advantage of X-1010 was observed only at the initial growth stages, which was reflected by significantly higher growth parameter values compared to the Triticale1 genotype. Both modeling approaches were sensitive enough to detect phenotypic differences in growth as early as 21 days after sowing. All growth parameters indicated a faster early growth of X-1010. However, the 2-D related parameter [projected shoot area (PSA)] is the most available one that can be extracted via end user-friendly imaging equipment. PSA provided adequate indication for the triticale early growth under weed-competition conditions and for the improved weed-competition ability. The adequate phenotyping ability for early growth and competition was robust under controlled and field conditions. PSA can be extracted from close and remote sensing platforms, thus, facilitate high throughput screening. Overall, the results of this study may improve cereal breeding for early vigor and weed-competitiveness.

High-Throughput Phenotyping of Soybean Maturity Using Time Series UAV Imagery and Convolutional Neural Networks

Soybean maturity is a trait of critical importance for the development of new soybean cultivars, nevertheless, its characterization based on visual ratings has many challenges. Unmanned aerial vehicles (UAVs) imagery-based high-throughput phenotyping methodologies have been proposed as an alternative to the traditional visual ratings of pod senescence. However, the lack of scalable and accurate methods to extract the desired information from the images remains a significant bottleneck in breeding programs. The objective of this study was to develop an image-based high-throughput phenotyping system for evaluating soybean maturity in breeding programs. Images were acquired twice a week, starting when the earlier lines began maturation until the latest ones were mature. Two complementary convolutional neural networks (CNN) were developed to predict the maturity date. The first using a single date and the second using the five best image dates identified by the first model. The proposed CNN architecture was validated using more than 15,000 ground truth observations from five trials, including data from three growing seasons and two countries. The trained model showed good generalization capability with a root mean squared error lower than two days in four out of five trials. Four methods of estimating prediction uncertainty showed potential at identifying different sources of errors in the maturity date predictions. The architecture developed solves limitations of previous research and can be used at scale in commercial breeding programs.

Global Wheat Head Detection (GWHD) Dataset: A Large and Diverse Dataset of High-Resolution RGB-Labelled Images to Develop and Benchmark Wheat Head Detection Methods

The detection of wheat heads in plant images is an important task for estimating pertinent wheat traits including head population density and head characteristics such as health, size, maturity stage, and the presence of awns. Several studies have developed methods for wheat head detection from high-resolution RGB imagery based on machine learning algorithms. However, these methods have generally been calibrated and validated on limited datasets. High variability in observational conditions, genotypic differences, development stages, and head orientation makes wheat head detection a challenge for computer vision. Further, possible blurring due to motion or wind and overlap between heads for dense populations make this task even more complex. Through a joint international collaborative effort, we have built a large, diverse, and well-labelled dataset of wheat images, called the Global Wheat Head Detection (GWHD) dataset. It contains 4700 high-resolution RGB images and 190000 labelled wheat heads collected from several countries around the world at different growth stages with a wide range of genotypes. Guidelines for image acquisition, associating minimum metadata to respect FAIR principles, and consistent head labelling methods are proposed when developing new head detection datasets. The GWHD dataset is publicly available at http://www.global-wheat.com/and aimed at developing and benchmarking methods for wheat head detection.

Data synthesis for crop variety evaluation. A review

Crop varieties should fulfill multiple requirements, including agronomic performance and product quality. Variety evaluations depend on data generated from field trials and sensory analyses, performed with different levels of participation from farmers and consumers. Such multi-faceted variety evaluation is expensive and time-consuming; hence, any use of these data should be optimized. Data synthesis can help to take advantage of existing and new data, combining data from different sources and combining it with expert knowledge to produce new information and understanding that supports decision-making. Data synthesis for crop variety evaluation can partly build on extant experiences and methods, but it also requires methodological innovation. We review the elements required to achieve data synthesis for crop variety evaluation, including (1) data types required for crop variety evaluation, (2) main challenges in data management and integration, (3) main global initiatives aiming to solve those challenges, (4) current statistical approaches to combine data for crop variety evaluation and (5) existing data synthesis methods used in evaluation of varieties to combine different datasets from multiple data sources. We conclude that currently available methods have the potential to overcome existing barriers to data synthesis and could set in motion a virtuous cycle that will encourage researchers to share data and collaborate on data-driven research.

Optimizing pollencounter for high throughput phenotyping of pollen quality in tomatoes

The macro "PollenCounter" in ImageJ was initially developed to assess pollen viability in grapevine. We set out to see if PollenCounter could be used to assess pollen number and viability in tomatoes.•We tested different optimization scenarios by adjusting the pollen size (100-900, 200-900 pixel2) and circularity of pollen grains (0.4-1, 0.5-1, and 0.6-1) on 31 microscopic images of stained tomato pollen. Both total pollen number and proportion of viable pollen were positively and significantly correlated with the outputs from manual counting. The scenario with 100-900 pixel2 pollen size and 0.4-1 circularity had the highest association for pollen number (r = 0.99) and pollen viability (r = 0.86). PollenCounter is 32-fold faster than manual counting.•We added a command to the macro to automatically save the outputs containing the number of total and viable pollen, avoiding transcription errors inherent to manual counting.•We successfully applied the optimized PollenCounter to discriminate tomato genotypes based on pollen number and pollen viability under heat stress. Our results show that PollenCounter, as an open-access macro, can be customized and improved to meet users' needs. The use of PollenCounter can save time and money in pollen quality assessment. We outline the steps to optimize the macro for other samples or crop species. The optimized macro could allow efficient screening of a large germplasm collection for pollen thermo-tolerance and selection of best thermo-tolerant individuals in breeding programs.

Integrating High-Throughput Phenotyping and Statistical Genomic Methods to Genetically Improve Longitudinal Traits in Crops

The rapid development of remote sensing in agronomic research allows the dynamic nature of longitudinal traits to be adequately described, which may enhance the genetic improvement of crop efficiency. For traits such as light interception, biomass accumulation, and responses to stressors, the data generated by the various high-throughput phenotyping (HTP) methods requires adequate statistical techniques to evaluate phenotypic records throughout time. As a consequence, information about plant functioning and activation of genes, as well as the interaction of gene networks at different stages of plant development and in response to environmental stimulus can be exploited. In this review, we outline the current analytical approaches in quantitative genetics that are applied to longitudinal traits in crops throughout development, describe the advantages and pitfalls of each approach, and indicate future research directions and opportunities.

Toward a Better Understanding of Genotype × Environment × Management Interactions-A Global Wheat Initiative Agronomic Research Strategy

The Wheat Initiative (WI) and the WI Expert Working Group (EWG) for Agronomy (www.wheatinitiative.org) were formed with a collective goal to "coordinate global wheat research efforts to increase wheat production, quality, and sustainability to advance food security and safety under changing climate conditions." The Agronomy EWG is responsive to the WI's research need, "A knowledge exchange strategy to ensure uptake of innovations on farm and to update scientists on changing field realities." The Agronomy EWG aims to consolidate global expertise for agronomy with a focus on wheat production systems. The overarching approach is to develop and adopt a systems-agronomy framework relevant to any wheat production system. It first establishes the scale of current yield gaps, identifies defensible benchmarks, and takes a holistic approach to understand and overcome exploitable yield gaps to complement genetic increases in potential yield. New opportunities to increase productivity will be sought by exploiting future Genotype × Environment × Management synergies in different wheat systems. To identify research gaps and opportunities for collaboration among different wheat producing regions, the EWG compiled a comprehensive database of currently funded wheat agronomy research (n = 782) in countries representing a large proportion of the wheat grown in the world. The yield gap analysis and research database positions the EWG to influence priorities for wheat agronomy research in member countries that would facilitate collaborations, minimize duplication, and maximize the global impact on wheat production systems. This paper outlines a vision for a global WI agronomic research strategy and discusses activities to date. The focus of the WI-EWG is to transform the agronomic research approach in wheat cropping systems, which will be applicable to other crop species.