Tropospheric aqueous-phase chemistry: kinetics, mechanisms, and its coupling to a changing gas phase

Aqueous-phase chemistry of atmospheric phenolic compounds: A critical review of laboratory studies

Phenolic compounds (PhCs) are crucial atmospheric pollutants typically emitted by biomass burning and receive particular concerns considering their toxicity, light-absorbing properties, and involvement in secondary organic aerosol (SOA) formation. A comprehensive understanding of the transformation mechanisms on chemical reactions in atmospheric waters (i.e., cloud/fog droplets and aerosol liquid water) is essential to predict more precisely the atmospheric fate and environmental impacts of PhCs. Laboratory studies play a core role in providing the fundamental knowledge of aqueous-phase chemical transformations in the atmosphere. This article critically reviews recent laboratory advances in SOA formation from the aqueous-phase reactions of PhCs. It focuses primarily on the aqueous oxidation of PhCs driven by two atmospheric reactive species: OH radicals and triplet excited state organics, including the important chemical kinetics and mechanisms. The effects of inorganic components (i.e., nitrate and nitrite) and transition metal ions (i.e., soluble iron) are highlighted on the aqueous-phase transformation of PhCs and on the properties and formation mechanisms of SOA. The review is concluded with the current knowledge gaps and future perspectives for a better understanding of the atmospheric transformation and SOA formation potential of PhCs.

Significantly Accelerated Hydroxyl Radical Generation by Fe(III)-Oxalate Photochemistry in Aerosol Droplets

Fe(III)-oxalate complexes are ubiquitous in atmospheric environments, which can release reactive oxygen species (ROS) such as H₂O₂, O^•2-, and OH^• under light irradiation. Although Fe(III)-oxalate photochemistry has been investigated extensively, the understanding of its involvement in authentic atmospheric environments such as aerosol droplets is far from enough, since the current available knowledge has mainly been obtained in bulk-phase studies. Here, we find that the production of OH^• by Fe(III)-oxalate in aerosol microdroplets is about 10-fold greater than that of its bulk-phase counterpart. In addition, in the presence of Fe(III)-oxalate complexes, the rate of photo-oxidation from SO₂ to sulfate in microdroplets was about 19-fold faster than that in the bulk phase. The availability of efficient reactants and mass transfer due to droplet effects made dominant contributions to the accelerated OH^• and SO₄^2- formation. This work highlights the necessary consideration of droplet effects in atmospheric laboratory studies and model simulations.

A critical review of sulfate aerosol formation mechanisms during winter polluted periods

Sulfate aerosol contributes to particulate matter pollution and plays a key role in aerosol radiative forcing, impacting human health and climate change. Atmospheric models tend to substantially underestimate sulfate concentrations during haze episodes, indicating that there are still missing mechanisms not considered by the models. Despite recent good progress in understanding the missing sulfate sources, knowledge on different sulfate formation pathways during polluted periods still involves large uncertainties and the dominant mechanism is under heated debate, calling for more field, laboratory, and modeling work. Here, we review the traditional sulfate formation mechanisms in cloud water and also discuss the potential factors affecting multiphase S(Ⅳ) oxidation. Then recent progress in multiphase S(Ⅳ) oxidation mechanisms is summarized. Sulfate formation rates by different prevailing oxidation pathways under typical winter-haze conditions are also calculated and compared. Based on the literature reviewed, we put forward control of the atmospheric oxidation capacity as a means to abate sulfate aerosol pollution. Finally, we conclude with a concise set of research priorities for improving our understanding of sulfate formation mechanisms during polluted periods.

Review of the influencing factors of secondary organic aerosol formation and aging mechanism based on photochemical smog chamber simulation methods

The formation and aging mechanism of secondary organic aerosol (SOA) and its influencing factors have attracted increasing attention in recent years because of their effects on climate change, atmospheric quality and human health. However, there are still large errors between air quality model simulation results and field observations. The currently undetected components during the formation and aging of SOA due to the limitation of current monitoring techniques and the interactions among multiple SOA formation influencing factors might be the main reasons for the differences. In this paper, we present a detailed review of the complex dynamic physical and chemical processes and the corresponding influencing factors involved in SOA formation and aging. And all these results were mainly based the studies of photochemical smog chamber simulation. Although the properties of precursor volatile organic compounds (VOCs), oxidants (such as OH radicals), and atmospheric environmental factors (such as NO_x, SO₂, NH₃, light intensity, temperature, humidity and seed aerosols) jointly influence the products and yield of SOA, the nucleation and vapor pressure of these products were found to be the most fundamental aspects when interpreting the dynamics of the SOA formation and aging process. The development of techniques for measuring intermediate species in SOA generation processes and the study of SOA generation and aging mechanism in complex systems should be important topics of future SOA research.

Highly Acidic Conditions Drastically Alter the Chemical Composition and Absorption Coefficient of α-Pinene Secondary Organic Aerosol

Secondary organic aerosols (SOA), formed through the gas-phase oxidation of volatile organic compounds (VOCs), can reside in the atmosphere for many days. The formation of SOA takes place rapidly within hours after VOC emissions, but SOA can undergo much slower physical and chemical processes throughout their lifetime in the atmosphere. The acidity of atmospheric aerosols spans a wide range, with the most acidic particles having negative pH values, which can promote acid-catalyzed reactions. The goal of this work is to elucidate poorly understood mechanisms and rates of acid-catalyzed aging of mixtures of representative SOA compounds. SOA were generated by the ozonolysis of α-pinene in a continuous flow reactor and then collected using a foil substrate. SOA samples were extracted and aged by exposure to varying concentrations of aqueous H₂SO₄ for 1-2 days. Chemical analysis of fresh and aged samples was conducted using ultra-performance liquid chromatography coupled with photodiode array spectrophotomety and high-resolution mass spectrometry. In addition, UV-vis spectrophotometry and fluorescence spectrophotometry were used to examine the changes in optical properties before and after aging. We observed that SOA that aged in moderately acidic conditions (pH from 0 to 4) experienced small changes in composition, while SOA that aged in a highly acidic environment (pH from -1 to 0) experienced more dramatic changes in composition, including the formation of compounds containing sulfur. Additionally, at highly acidic conditions, light-absorbing and fluorescent compounds appeared, but their identities could not be ascertained due to their small relative abundance. This study shows that acidity is a major driver of SOA aging, resulting in a large change in the chemical composition and optical properties of aerosols in regions where high concentrations of H₂SO₄ persist, such as upper troposphere and lower stratosphere.

Mass Accommodation of Water on Ice at Environmentally Relevant Temperatures: Insights from Fast Scanning Calorimetry

Using a conceptually simple, quasi-adiabatic, fast scanning calorimetry technique, we have investigated the sublimation kinetics of ice films with thicknesses ranging from 14 to 400 nm at environmentally relevant temperatures, between 223 and 268 K. The technique enables accurate determination of ice sublimation rates into vacuum under the conditions of free molecular flow during rapid yet quasistatic heating. The measured sublimation fluxes yield the vapor pressure of the ice samples, which is indistinguishable from that derived from experiments under near-equilibrium conditions. Thus, in agreement with the microscopic reversibility principle, we conclude that the mass accommodation coefficient of water by ice is unity and temperature-independent in the temperature range of the studies. We discuss these findings in the context of current computational and theoretical research into the chemistry and physics of aqueous interfaces.

Emerging investigator series: ozone uptake by urban road dust and first evidence for chlorine activation during ozone uptake by agro-based anti-icer: implications for wintertime air quality in high-latitude urban environments

High-latitude urban regions provide a unique and complex range of environmental surfaces for uptake of trace pollutant gases, including winter road maintenance materials (e.g., gravel, rock salts, and anti-icer, a saline solution applied to roads during winter). In an effort to reduce the negative environmental and economic impacts of road salts, many municipalities have turned to agro-based anti-icing materials that are rich in organic material. To date, the reactivity of both anti-icer and saline road dust with pollutant gases remain unexplored, which limits our ability to assess the potential impacts of these materials on air quality in high-latitude regions. Here, we used a coated-wall flow tube to investigate the uptake of ozone, an important air pollutant, by road dust collected in Edmonton, Canada. At 25% relative humidity (RH) and 50 ppb ozone, γ_BET for ozone uptake by this sample is (8.0 ± 0.7) × 10^-8 under dark conditions and (2.1 ± 0.1) × 10^-7 under illuminated conditions. These values are 2-4× higher than those previously obtained by our group for natural mineral dusts, but are not large enough for suspended road dust to influence local ozone mixing ratios. In a separate set of experiments, we also investigated the uptake of ozone by calcium chloride (i.e., road salt) and commercial anti-icer solution. Although ozone uptake by pure calcium chloride was negligible, ozone uptake by anti-icer was significant, which implies that the reactivity of anti-icer is conferred by its organic content. Importantly, ozone uptake by anti-icer-and, to a lesser extent, road dust doped with anti-icer-leads to the release of inorganic chlorine gas, which we collected using inline reductive trapping and quantified using ion chromatography. To explain these results, we propose a novel pathway for chlorine activation: here, ozone oxidation of the anti-icer organic fraction (in this case, molasses) yields reactive OH radicals that can oxidize chloride. In summary, this study demonstrates the ability of road dust and anti-icer to influence atmospheric oxidant mixing ratios in cold-climate urban areas, and highlights previously unidentified air quality impacts of winter road maintenance decisions.

Aqueous secondary organic aerosol formation attributed to phenols from biomass burning

Biomass burning emits large quantities of phenols, which readily partition into the atmospheric aqueous phase and subsequently may react to produce aqueous secondary organic aerosol (aqSOA). For the first time, we quantitatively explored the influence of phenols emitted from biomass burning on aqSOA formation in the winter of Beijing. A typical haze episode associated with significant aqSOA formation was captured. During this episode, aqueous-phase processing of biomass burning promoted aqSOA formation was identified. Furthermore, high-resolution mass spectrum analysis provided molecular-level evidence of the phenolic aqSOA tracers. Estimation of aqSOA formation rate (R_aqSOA) with compiled laboratory kinetic data indicated that biomass-burning phenols can efficiently produce aqSOA at midday, with R_aqSOA of 0.42 μg m^-3 h^-1 accounting for 15 % of total aqSOA formation rate. The results highlight that aqSOA formation of phenols contributes the haze pollution. This implies the importance of regional joint control of biomass burning to mitigate the heavy haze.

How Well Do We Handle the Sample Preparation, FT-ICR Mass Spectrometry Analysis, and Data Treatment of Atmospheric Waters?

FT-ICR MS (Fourier-transform ion cyclotron resonance mass spectrometry) analysis has shown great potential to aid in the understanding of the extremely high molecular diversity of cloud water samples. The main goal of this work was to determine the differences in terms of formula assignment for analytical (i.e., measurement replicates) and experimental replicates of a given cloud water sample. The experimental replicates, obtained by solid phase extraction, were also compared to the results obtained for freeze-dried samples to evaluate whether the presence of salts interferes with the analysis. Two S/N ratios, generally adopted for atmospheric samples, were evaluated, and three different algorithms were used for assignment: DataAnalysis 5.3 (Bruker), Composer (Sierra Analytics), and MFAssignR (Chemical Advanced Resolution Methods Lab). In contrast to other works, we wanted to treat this comparison from the point of view of users, who usually must deal with a simple list of m/z ratios and intensity with limited access to the mass spectrum characteristics. The aim of this study was to establish a methodology for the treatment of atmospheric aqueous samples in light of the comparison of three different software programs, to enhance the possibility of data comparison within samples.

Average Cloud Droplet Size and Composition: Good Assumptions for Predicting Oxidants in the Atmospheric Aqueous Phase?

Chemical models that describe the atmospheric multiphase (gas/aqueous) system often include detailed kinetic and mechanistic schemes describing chemical reactions in both phases. The present study explores the importance of properties including the chemical composition of droplet populations, such as pH value and iron present in only a few droplets, as well as droplet size and their distribution. It is found that the assumption of evenly distributed iron in all cloud droplets leads to an underestimate by up to 1 order of magnitude of OH concentrations in the aqueous phase, whereas the predicted iron(II)/iron(total) ratio is overestimated by up to a factor of 2. While the sulfate mass formed in cloud droplets is not largely affected by any of the assumptions, the predicted secondary organic aerosol mass varies by an order of magnitude. This sensitivity study reveals that multiphase chemistry model studies should focus not only on chemical mechanism development but also on careful considerations of droplet properties to comprehensively describe the atmospheric multiphase chemical system.

Strong impacts of biomass burning, nitrogen fertilization, and fine particles on gas-phase hydrogen peroxide (H2O2)

Gas-phase hydrogen peroxide (H₂O₂) plays an important role in atmospheric chemistry as an indicator of the atmospheric oxidizing capacity. It is also a vital oxidant of sulfur dioxide (SO₂) in the aqueous phase, resulting in the formation of acid precipitation and sulfate aerosol. However, sources of H₂O₂ are not fully understood especially in polluted areas affected by human activities. In this study, we reported some high H₂O₂ cases observed during one summer and two winter campaigns conducted at a polluted rural site in the North China Plain. Our results showed that agricultural fires led to high H₂O₂ concentrations up to 9 ppb, indicating biomass burning events contributed substantially to primary H₂O₂ emission. In addition, elevated H₂O₂ and O₃ concentrations were measured after fertilization as a consequence of the enhanced atmospheric oxidizing capacity by soil HONO emission. Furthermore, H₂O₂ exhibited unexpectedly high concentration under high NO_x conditions in winter, which are closely related to multiphase reactions in particles involving organic chromophores. Our findings suggest that these special factors (biomass burning, fertilization, and ambient particles), which are not well considered in current models, are significant contributors to H₂O₂ production, thereby affecting the regional atmospheric oxidizing capacity and the global sulfate aerosol formation.

Displacement of Strong Acids or Bases by Weak Acids or Bases in Aerosols: Thermodynamics and Kinetics

Depletion of chloride, nitrate, or ammonium from atmospheric aerosols represents a unique class of displacement reactions in which strong acids (HCl and HNO₃) or bases (NH₃) are substituted by weaker ones (i.e., dicarboxylic acids or dicarboxylate salts, respectively). These reactions alter the aerosol composition and perturb the atmospheric cycle of volatile compounds, thereby affecting environmental systems and climate. Despite the profound implications, the mechanism of these unique displacement reactions remains unclear. Here, we elucidate the thermodynamics and kinetics of these reactions using the multiphase buffer theory and a diffusion-controlled mass-transfer function, respectively. On the thermodynamic aspect, we find that the effective dissociation constants of the strong acids and bases in aerosols are 2 to 10 orders of magnitude lower than those in bulk solutions. On the kinetic aspect, we find that displacement reactions occur rapidly in aerosol microdroplets with a radius below 10 μm. Within this size range, the characteristic reaction time is always shorter than the lifetime of the aerosols in the atmosphere. Our findings suggest that the unique displacement reactions can significantly modify the composition of atmospheric aerosols, and consequentially, these aerosols may manifest distinct properties unforeseen by the chemistry of homogeneous bulk systems.

Second-Order Kinetic Rate Coefficients for the Aqueous-Phase Sulfate Radical (SO4•-) Oxidation of Some Atmospherically Relevant Organic Compounds

The sulfate anion radical (SO₄^•–) is a reactive oxidant formed in the autoxidation chain of sulfur dioxide, among other sources. Recently, new formation pathways toward SO₄^•– and other reactive sulfur species have been reported. This work investigated the second-order rate coefficients for the aqueous SO₄^•– oxidation of the following important organic aerosol compounds (k_SO4): 2-methyltetrol, 2-methyl-1,2,3-trihydroxy-4-sulfate, 2-methyl-1,2-dihydroxy-3-sulfate, 1,2-dihydroxyisoprene, 2-methyl-2,3-dihydroxy-1,4-dinitrate, 2-methyl-1,2,4-trihydroxy-3-nitrate, 2-methylglyceric acid, 2-methylglycerate, lactic acid, lactate, pyruvic acid, pyruvate. The rate coefficients of the unknowns were determined against that of a reference in pure water in a temperature range of 298–322 K. The decays of each reagent were measured with nuclear magnetic resonance (NMR) and high-performance liquid chromatography–high-resolution mass spectrometry (HPLC-HRMS). Incorporating additional SO₄^•– reactions into models may aid in the understanding of organosulfate formation, radical propagation, and aerosol mass sinks.

Pollution-Derived Br2 Boosts Oxidation Power of the Coastal Atmosphere

The bromine atom (Br^•) has been known to destroy ozone (O₃) and accelerate the deposition of toxic mercury (Hg). However, its abundance and sources outside the polar regions are not well-known. Here, we report significant levels of molecular bromine (Br₂)─a producer of Br^•─observed at a coastal site in Hong Kong, with an average noontime mixing ratio of 5 ppt. Given the short lifetime of Br₂ (∼1 min at noon), this finding reveals a large Br₂ daytime source. On the basis of laboratory and field evidence, we show that the observed daytime Br₂ is generated by the photodissociation of particulate nitrate (NO₃^-) and that the reactive uptake of dinitrogen pentoxide (N₂O₅) on aerosols is an important nighttime source. Model-calculated Br^• concentrations are comparable with that of the OH radical─the primary oxidant in the troposphere, accounting for 24% of the oxidation of isoprene, a 13% increase in net O₃ production, and a nearly 10-fold increase in the production rate of toxic Hg^II. Our findings reveal that reactive bromines play a larger role in the atmospheric chemistry and air quality of polluted coastal and maritime areas than previously thought. Our results also suggest that tightening the control of emissions of two conventional pollutants (NO_x and SO₂)─thereby decreasing the levels of nitrate and aerosol acidity─would alleviate halogen radical production and its adverse impact on air quality.

Temperature- and pH- Dependent OH Radical Reaction Kinetics of Tartaric and Mucic Acids in the Aqueous Phase

Tartaric acid and mucic acid are dicarboxylic acids (DCAs), a substance class often found in atmospheric aerosols and cloud droplets. The hydroxyl radical (^•OH)-induced oxidation in the aqueous phase is known to be an important loss process of organic compounds such as DCAs. However, the study of ^•OH kinetics of DCAs in the aqueous phase is still incomplete. In the present study, the rate constants of the ^•OH reactions of tartaric acid and mucic acid in the aqueous phase were determined by the thiocyanate competition kinetics method as a function of temperature and pH. The following T-dependent Arrhenius expressions (in units of L mol^-1 s^-1) were first derived for the ^•OH reactions with tartaric acid─k(T, H₂A) = (3.3 ± 0.1) × 10¹⁰ exp[(-1350 ± 110 K)/T], k(T, HA^-) = (3.6 ± 0.1) × 10¹⁰ exp[(-580 ± 110 K)/T], and k(T, A^2-) = (3.3 ± 0.1) × 10¹⁰ exp[(-1190 ± 170 K)/T]─as well as mucic acid─k(T, H₂A) = (2.2 ± 0.1) × 10¹⁰ exp[(-1140 ± 150 K)/T], k(T, HA^-) = (4.8 ± 0.1) × 10¹⁰ exp[(-1280 ± 170 K)/T], and k(T, A^2-) = (2.1 ± 0.1) × 10¹⁰ exp[(-970 ± 70 K)/T]. A general trend of the ^•OH rate constant is found as kA2- > kHA- > kH2A. The pH- and temperature-dependent rate constants of the OH radical reactions allow an accurate description of the source and sink processes in the tropospheric aqueous phase.

Coupled Interfacial and Bulk Kinetics Govern the Timescales of Multiphase Ozonolysis Reactions

Chemical transformations in aerosols impact the lifetime of particle phase species, the fate of atmospheric pollutants, and both climate- and health-relevant aerosol properties. Timescales for multiphase reactions of ozone in atmospheric aqueous phases are governed by coupled kinetic processes between the gas phase, the particle interface, and its bulk, which respond dynamically to reactive consumption of O₃. However, models of atmospheric aerosol reactivity often do not account for the coupled nature of multiphase processes. To examine these dynamics, we use new and prior experimental observations of aqueous droplet reaction kinetics, including three systems with a range of surface affinities and ozonolysis rate coefficients (trans-aconitic acid (C₆H₆O₆), maleic acid (C₄H₄O₄), and sodium nitrite (NaNO₂)). Using literature rate coefficients and thermodynamic properties, we constrain a simple two-compartment stochastic kinetic model which resolves the interface from the particle bulk and represents O₃ partitioning, diffusion, and reaction as a coupled kinetic system. Our kinetic model accurately predicts decay kinetics across all three systems, demonstrating that both the thermodynamic properties of O₃ and the coupled kinetic and diffusion processes are key to making accurate predictions. An enhanced concentration of adsorbed O₃, compared to gas and bulk phases is rapidly maintained and remains constant even as O₃ is consumed by reaction. Multiphase systems dynamically seek to achieve equilibrium in response to reactive O₃ loss, but this is hampered at solute concentrations relevant to aqueous aerosol by the rate of O₃ arrival in the bulk by diffusion. As a result, bulk-phase O₃ becomes depleted from its Henry's law solubility. This bulk-phase O₃ depletion limits reaction timescales for relatively slow-reacting organic solutes with low interfacial affinity (i.e., trans-aconitic and maleic acids, with k_rxn ≈ 10³-10⁴ M^-1 s^-1), which is in contrast to fast-reacting solutes with higher surface affinity (i.e., nitrite, with k_rxn ≈ 10⁵ M^-1 s^-1) where surface reactions strongly impact the observed decay kinetics.

Aqueous ·OH Oxidation of Highly Substituted Phenols as a Source of Secondary Organic Aerosol

Biomass burning (BB) releases large quantities of phenols (ArOH), which can partition into cloud/fog drops and aerosol liquid water (ALW), react, and form aqueous secondary organic aerosol (aqSOA). While simple phenols are too volatile to significantly partition into particle water, highly substituted ArOH partition more strongly and might be important sources of aqSOA in ALW. To investigate this, we measured the ^·OH oxidation kinetics and aqSOA yields for six highly substituted ArOH from BB. Second-order rate constants are high, in the range (1.9-14) × 10⁹ M^-1 s^-1 at pH 2 and (14-25) × 10⁹ M^-1 s^-1 at pH 5 and 6. Mass yields of aqSOA are also high, with an average (±1σ) value of 82 (±12)%. ALW solutes have a range of impacts on phenol oxidation by ^·OH: a BB sugar and some inorganic salts suppress oxidation, while a nitrate salt and transition metals enhance oxidation. Finally, we estimated rates of aqueous- and gas-phase formation of SOA from a single highly substituted phenol as a function of liquid water content (LWC), from conditions of cloud/fog (0.1 g-H₂O m^-3) to ALW (10 μg-H₂O m^-3). Formation of aqSOA is significant across the LWC range, although gas-phase ^·OH becomes dominant under ALW conditions. We also see a generally large discrepancy between measured and modeled aqueous ^·OH concentrations across the LWC range.

Influence of strong iron-binding ligands on cloud water oxidant capacity

Iron (Fe) plays a dual role in atmospheric chemistry: it is involved in chemical and photochemical reactivity and serves as a micronutrient for microorganisms that have recently been shown to produce strong organic ligands. These ligands control the reactivity, mobility, solubility and speciation of Fe, which have a potential impact on Fe bioavailability and cloud water oxidant capacity. In this work, the concentrations of Fe-binding ligands and the conditional stability constants were experimentally measured for the first time by Competitive Ligand Exchange-Adsorptive Cathodic Stripping Voltammetry (CLE-ACSV) technique in cloud water samples collected at puy de Dôme (France). The conditional stability constants, which indicate the strength of the Fe-ligand complexes, are higher than those considered until now in cloud chemistry (mainly Fe-oxalate). To understand the effect of Fe complexation on cloud water reactivity, we used the CLEPS cloud chemistry model. According to the model results, we found that Fe complexation impacts the hydroxyl radical formation rate: contrary to our expectations, Fe complexation by natural organic ligands led to an increase in hydroxyl radical production. These findings have important impacts on cloud chemistry and the global iron cycle.

Nontarget Approach to Identify Complexing Agents in Atmospheric Aerosol and Rainwater Samples

Atmospheric particles and droplets contain numerous organic substances, some of which form complexes with metal ions, significantly affecting bulk physicochemical properties and chemical reactivity. However, the detection and identification of complexing agents and their corresponding metal complexes remains an analytical challenge. In this study, we developed an LC/HRMS nontarget screening (NTS) approach which allows the selective detection of complexing agents in aerosol particle extracts and rainwater. To achieve this, a T-junction is installed between the LC outlet and the ion source, and a FeCl₃ solution is added for postcolumn complexation. The resulting mass spectra are screened for the three characteristic iron(III)-complexes [M - H + FeCl₃]^-, [M - 2H + FeCl₂]^-, and [M - 3H + FeCl]^- with mass differences (Δm/z) between the complexing agent and the iron complex of 160.8416, 124.8648, and 89.8959, respectively. Up to 29 di- or tricarboxylic acids were identified as complexing agents in aerosol particle samples from two different sites (Melpitz, Germany, and Wangdu, China) at concentrations as low as 50 nM. Thirteen complexing agents were detected even in measurements without postcolumn iron addition from complexation with background Fe³⁺ traces from the analytical system. At least for the highest concentrated complexing agents, the proposed screening approach can thus be exploited in a NTS approach without any device modification. Besides carboxylic acids, 4-nitrophenol and 4-nitrocatechol were identified as further complexing agents, demonstrating the applicability of the approach to other matrices and to a range of different complexing agents.

T- and pH-dependent OH radical reaction kinetics with glycine, alanine, serine, and threonine in the aqueous phase

Glycine, alanine, serine, and threonine are essential amino acids originating from biological activities. These substances can be emitted into the atmosphere directly. In the present study, the aqueous phase reaction kinetics of hydroxyl radicals (˙OH) with the four amino acids is investigated using the competition kinetics method under controlled temperature and pH conditions. The following T-dependent Arrhenius expressions are derived for the ˙OH reactions with glycine, k(T, H₂A⁺) = (9.1 ± 0.3) × 10⁹ × exp[(-2360 ± 230 K)/T], k(T, HA^±) = (1.3 ± 0.1) × 10¹⁰ × exp[(-2040 ± 240 K)/T]; alanine, k(T, H₂A⁺) = (1.4 ± 0.1) × 10⁹ × exp[(-1120 ± 320 K)/T], k(T, HA^±) = (5.5 ± 0.2) × 10⁹ × exp[(-1300 ± 200 K)/T]; serine, k(T, H₂A⁺) = (1.1 ± 0.1) × 10⁹ × exp[(-470 ± 150 K)/T], k(T, HA^±) = (3.9 ± 0.1) × 10⁹ × exp[(-720 ± 130 K)/T]; and threonine, k(T, H₂A⁺) = (5.0 ± 0.1) × 10¹⁰ × exp[(-1500 ± 100 K)/T], k(T, HA^±) = (3.3 ± 0.1) × 10¹⁰ × exp[(-1320 ± 90 K)/T] (in units of L mol^-1 s^-1). The energy barriers of the ˙OH-induced H atom abstractions were simulated by the density functional theory (DFT) calculation performed with GAUSSIAN using the method of M06-2X and the basis set of 6-311++G(3df,2p). According to the calculation results, the -COOH and -NH₃⁺ groups with strong negative inductive effects increase the energy barriers and thus decrease the ˙OH reaction rate constants. In contrast, the presence of a -OH or -CH₃ group with weak negative or positive inductive effects can reduce energy barriers and hence increase the ˙OH reaction rate constants. To improve the previous structure-activity relationship, the contribution factors of -NH₃⁺ at C_α-atom and C_β-atom are determined as 0.07 and 0.15, respectively. Aqueous phase ˙OH oxidation acts as an important sink of the amino acids in the atmosphere, and can be accurately described by the obtained Arrhenius expressions under atmospheric conditions.

Inorganic Ions Enhance the Number of Product Compounds through Heterogeneous Processing of Gaseous NO2 on an Aqueous Layer of Acetosyringone

Methoxyphenols represent important pollutants that can participate in the formation of secondary organic aerosols (SOAs) through chemical reactions with atmospheric oxidants. In this study, we determine the influence of ionic strength, pH, and temperature on the heterogeneous reaction of NO₂ with an aqueous film consisting of acetosyringone (ACS), as a proxy for methoxyphenols. The uptake coefficient of NO₂ (50 ppb) on ACS (1 × 10^-5 mol L^-1) is γ = (9.3 ± 0.09) × 10^-8 at pH 5, and increases by one order of magnitude to γ = (8.6 ± 0.5) × 10^-7 at pH 11. The lifetime of ACS due to its reaction with NO₂ is largely affected by the presence of nitrate ions and sulfate ions encountered in aqueous aerosols. The analysis performed by membrane inlet single-photon ionization-time-of-flight mass spectrometry (MI-SPI-TOFMS) reveals an increase in the number of product compounds and a change of their chemical composition upon addition of nitrate ions and sulfate ions to the aqueous thin layer consisting of ACS. These outcomes indicate that inorganic ions can play an important role during the heterogeneous oxidation processes in aqueous aerosol particles.

Amplification of light within aerosol particles accelerates in-particle photochemistry

Optical confinement (OC) structures the optical field and amplifies light intensity inside atmospheric aerosol particles, with major consequences for sunlight-driven aerosol chemistry. Although theorized, the OC-induced spatial structuring has so far defied experimental observation. Here, x-ray spectromicroscopic imaging complemented by modeling provides direct evidence for OC-induced patterning inside photoactive particles. Single iron(III)-citrate particles were probed using the iron oxidation state as a photochemical marker. Based on these results, we predict an overall acceleration of photochemical reactions by a factor of two to three for most classes of atmospheric aerosol particles. Rotation of free aerosol particles and intraparticle molecular transport generally accelerate the photochemistry. Given the prevalence of OC effects, their influence on aerosol particle photochemistry should be considered by atmospheric models.

Particle hygroscopicity inhomogeneity and its impact on reactive uptake

Atmospheric particles are important reaction vessels for multiphase chemistry. We conducted a meta-analysis of previous field observations in various environments (includes ocean, urban and rural regions), showing that particle hygroscopicity inhomogeneity (PHI) is ubiquitous for the continental atmospheric particles, in which a considerable part of the particulate matters is hydrophobic (10%-33% on average). However, the effects of PHI in quantifying the uptake process of reactive gases are still unclear. Here, taking N₂O₅ uptake as an example, we showed that using a laboratory-based parameterization scheme without considering the PHI might result in a misestimation of uptake rate coefficient, especially under low ambient relative humidity (RH). Such misestimation may be caused by the differences of the uptake coefficients, as well as the proportion of surface area concentration (SA) between hydrophilic and hydrophobic particles. We suggested that the PHI should be well-considered in establishing the reactive traces gases heterogeneous uptake parameterizations.

Photosensitization mechanisms at the air-water interface of aqueous aerosols

Photosensitization reactions are believed to provide a key contribution to the overall oxidation chemistry of the Earth's atmosphere. Generally, these processes take place on the surface of aqueous aerosols, where organic surfactants accumulate and react, either directly or indirectly, with the activated photosensitizer. However, the mechanisms involved in these important interfacial phenomena are still poorly known. This work sheds light on the reaction mechanisms of the photosensitizer imidazole-2-carboxaldehyde through ab initio (QM/MM) molecular dynamics simulations and high-level ab initio calculations. The nature of the lowest excited states of the system (singlets and triplets) is described in detail for the first time in the gas phase, in bulk water, and at the air-water interface, and possible intersystem crossing mechanisms leading to the reactive triplet state are analyzed. Moreover, the reactive triplet state is shown to be unstable at the air-water surface in a pure water aerosol. The combination of this finding with the results obtained for simple surfactant-photosensitizer models, together with experimental data from the literature, suggests that photosensitization reactions assisted by imidazole-2-carboxaldehyde at the surface of aqueous droplets can only occur in the presence of surfactant species, such as fatty acids, that stabilize the photoactivated triplet at the interface. These findings should help the interpretation of field measurements and the design of new laboratory experiments to better understand atmospheric photosensitization processes.

Atmospheric Reactivity of Methoxyphenols: A Review

Methoxyphenols emitted from lignin pyrolysis are widely used as potential tracers for biomass burning, especially for wood burning. In the past ten years, their atmospheric reactivity has attracted increasing attention from the academic community. Thus, this work provides an extensive review of the atmospheric reactivity of methoxyphenols, including their gas-phase, particle-phase, and aqueous-phase reactions, as well as secondary organic aerosol (SOA) formation. Emphasis was placed on kinetics, mechanisms, and SOA formation. The reactions of methoxyphenols with OH and NO₃ radicals were the predominant degradation pathways, which also had significant SOA formation potentials. The reaction mechanism of methoxyphenols with O₃ is the cycloaddition of O₃ to the benzene ring or unsaturated C═C bond, while H-abstraction and radical adduct formation are the main degradation channels of methoxyphenols by OH and NO₃ radicals. Based on the published studies, knowledge gaps were pointed out. Future studies including experimental simulations and theoretical calculations of other representative kinds of methoxyphenols should be systematically carried out under complex pollution conditions. In addition, the ecotoxicity of their degradation products and their contribution to SOA formation from the atmospheric aging of biomass-burning plumes should be seriously assessed.

Local fresh- and sea-water effects on fog occurrence

Fog is an important atmospheric phenomenon highly relevant to ecosystems and/or the environment. Two essential prerequisites of fog formation are the presence of fog condensation nuclei and water in the atmosphere. The aim of our study was to examine in detail how fog occurrence is influenced by water areas in the immediate vicinity of the fog observation site. We have used as input data long-term observations on fog occurrence measured at 56 professional meteorological stations in Romania in 1981-2017 and GIS-derived information on water areas and on two topographical indices, TWI and TPI, in the neighbourhood of these stations. We formulated three alternative models of different complexity based on a semiparametric generalised additive logistic model for the probability of fog occurrence with potentially nonlinear, smooth effects modelled via penalised splines. A radius of 9 km appeared to be the most influential when considering the water area in a circle around the fog observation station. Based on our results, we concluded that (i) the water area in the vicinity of the station is a factor influencing fog occurrence, (ii) the water's effect differs according to water type (freshwater or seawater proximity), and (iii) GIS-derived topographical indices are informative for the explanation of fog occurrence and their inclusion enhanced the fit of the models substantially. Our findings, based on a reliable long-term data set of fog occurrence and recent GIS-derived data, explored by a relevant statistical approach will enhance further considerations related to fog formation and its environmental consequences.

Surfactant-Assisted Ozonolysis of Alkenes in Water: Mitigation of Frothing Using Coolade as a Low-Foaming Surfactant

Aqueous-phase ozonolysis in the atmosphere is an important process during cloud and fog formation. Water in the atmosphere acts as both a reaction medium and a reductant during the ozonolysis. Inspired by the atmospheric aqueous-phase ozonolysis, we herein report the ozonolysis of alkenes in water assisted by surfactants. Several types of surfactants, including anionic, cationic, and nonionic surfactants, were investigated. Although most surfactants enhanced the solubility of alkenes in water, they also generated excessive foaming during the ozone bubbling, which led to the loss of products. Mitigation of the frothing was accomplished by using Coolade as a nonionic and low-foaming surfactant. Coolade-assisted ozonolysis of alkenes in water provided the desired carbonyl products in good yields and comparable to those achieved in organic solvents. During the ozonolysis reaction, water molecules trapped within the polyethylene glycol region of Coolade were proposed to intercept the Criegee intermediate to provide a hydroxy hydroperoxide intermediate. Decomposition of the hydroxy hydroperoxide led to formation of the carbonyl product without the need for a reductant typically required for the conventional ozonolysis using organic solvents. This study presents Coolade as an effective surfactant to improve the solubility of alkenes while mitigating frothing during the ozonolysis in water.

Toward a better understanding of ferric-oxalate complex photolysis: The role of the aqueous/air interface of droplet

In this work, the photo reactivity of ferric oxalate (Fe(III)-Ox) complex in atmospheric particles was investigated. Raman spectroscopy was used to explore the mechanism and kinetics of Fe(III)-Ox photolysis occurring at the aqueous/gas interface, inside the droplet and in bulk solution. Ferrous carbonate (FeCO₃) was detected indicating that carbonate ion (CO₃^2-) formed inside the droplets would compete with oxalate ligands for iron complexation. A higher concentration of photoproduct Fe(II)-Ox was observed at the surface and inside of the droplets than in bulk solution. In particular, Fe(III)-Ox on the droplet surface was quickly reduced with light and Fe(II)-Ox concentration gradually decreased with irradiation time. The evolution of Fe(II)-Ox concentration was similar inside the droplet and in bulk solution with a trend of first increasing and then gradually decreasing during irradiation time. Although FeCO₃ would hinder Fenton intermediate reaction, the photolysis rate of Fe(III)-Ox in droplets was almost two orders of magnitude times faster than that observed during bulk experiment. In general, the photolysis mechanism and kinetics of Fe(III)-Ox in aqueous/air interface, inside of droplet and bulk solution were distinct, and the production of oxide species from the atmospheric Fe(III)-Ox droplets was underestimated.

Mid-infrared spectroscopy of hemispherical water droplets

As an important component of atmospheric aerosols, water is profoundly related with aerosol hygroscopicity and provides a medium for atmospheric heterogeneous reactions. The quantitative analysis of water content in aerosol droplets is instrumental to understanding atmospheric chemistry, as well as to addressing the related environmental issues, such as air pollution and climate change. Fourier transform infrared (FTIR) spectroscopy has been widely adopted to quantify the amount of water content in atmospheric aerosols, which is based on the absorbance of OH functional group in proportion to water content. However, in the OH stretching vibration band around 3400 cm^-1, spectral distortions may occur, making a quantitative analysis impossible. In addressing this issue, here we put forth a model to simulate the FTIR absorption of hemispherical water droplets, along with a quantitative description of the spectral distortion. Our model prediction was benchmarked with the microscopic-FTIR experiments conducted on sodium sulfate droplets, and good agreements between theoretical and experimental results were found. We observed that the absorbance spanning across the mid-wavenumber infrared region increases with water absorption coefficients; while such an increasing trend was not seen in the 3400 cm^-1 band. We speculate that the spectral saturated absorption is related to the absorption coefficient of water and the ratio of the projected area of droplets to the aperture area. In addition, the effects of droplet size and number density on the absorption spectra were investigated. The waveband range of the saturated absorption broadens with an increase in droplet radius. On the other hand, as the number density of water droplets increases, the absorption at 3400 cm^-1 is enhanced, and the characteristic peak of condensed water becomes increasingly sharper, asymptotic to the typical infrared spectra of water collected by the pressing method.

Water Significantly Changes the Ring-Cleavage Process During Aqueous Photooxidation of Toluene

As a major constituent of aromatic compounds, toluene exists widely in environmental aqueous phases. This research investigated the aqueous-phase OH oxidation of toluene to determine how liquid water changes the radical chemistry of ring-cleavage pathways. Results show that ring-cleavage pathways through the C₇ bicyclic peroxy radical (BPR) account for about 70% of total aqueous-phase oxidation pathways, which is similar to that in the gas-phase oxidation. However, detailed ring-cleavage pathways in the aqueous phase change significantly compared with those in the gas phase as shown by the decreased production of glyoxal and methylglyoxal and the enhanced production of formic acid and acetic acid as primary products, which can be attributed to the presence of liquid water. Water facilitates the formation of the BPR whose structure is different from that in the gas-phase oxidation and results in different ring-cleavage pathways through hydrogen-shift reactions. Furthermore, water helps the hydration of acyl radicals formed by the BPR to produce organic acids. With the suggested ring-cleavage mechanisms, a box model can simulate aqueous-phase product distributions better than that with the classical ring-cleavage mechanisms. Given the influence of water on reaction mechanisms, aqueous-phase oxidation of hydrophobic organic compounds may be more important than previously assumed.

Organic Coating Reduces Hygroscopic Growth of Phase-Separated Aerosol Particles

A large fraction of secondary aerosol particles are liquid-liquid phase-separated with an organic shell and an inorganic core. This has the potential to regulate the hygroscopicity of such particles, with significant implications for their optical properties, reactivity, and lifetime. However, it is unclear how this phase separation affects the hygroscopic growth of the particles. Here, we showed a large variation in hygroscopic growth (e.g., 1.14-1.32 under a relative humidity (RH) of 90%) of particles from the forest and urban atmosphere, which had different average core-shell ratios. For this reason, a controlled laboratory experiment further quantifies the impact of the organic shell on particle growth with different RH values. Laboratory experiments demonstrated that (NH₄)₂SO₄ particles with thicker secondary organic shells have a lower growth factor at an RH below 94%. Organic shells started to deliquesce first (RH > 50%) and the phase changes of sulfate cores from solid to liquid took place at an RH higher than 80% as deliquescence relative humidity of pure (NH₄)₂SO₄. Our study provides the first direct evidence on an individual particle basis that hygroscopic growth behavior of phase-separated particles is dependent on the thickness of organic shells, highlighting the importance of organic coating in water uptake and possible heterogeneous reactions of the phase-separated particles.

Kinetics of the oxidation of ammonia and amines with hydroxyl radicals in the aqueous phase

While many studies have reported on the oxidation kinetics of ammonia and amines with the hydroxyl radical (OH) in the gas phase, the analogous reactions in the aqueous phase have not been adequately studied. In this work, the reaction rate constants of ammonia, dimethylamine (DMA) and diethylamine (DEA) with hydroxyl radicals in the aqueous phase were investigated using ion chromatography. The neutral and protonated forms of each base were shown to have differing rate constants with OH by performing the measurements over a range of pH from 7.0 to 11.0. Excess hydrogen peroxide was used as the precursor for hydroxyl radicals, while monochloroacetic acid and benzoic acid were chosen as the reference compounds for the relative rate method. The rate constants of both protonated forms and neutral forms were calculated for DMA ((9.5 ± 1.2) ×10⁶ M^-1 s^-1 and (3.3 ± 0.2) ×10⁹ M^-1 s^-1) and DEA ((1.5 ± 0.4) × 10⁸ M^-1 s^-1 and (4.9 ± 0.1) × 10⁹ M^-1 s^-1) using the relative rate method. The rate constant of ammonium ion and neutral ammonia were calculated to be (2.3 ± 0.5) × 10⁶ M^-1 s^-1 and (1.8 ± 0.4) × 10⁸ M^-1 s^-1, respectively. With a pK_a of 9.25, the rate constant of the protonated form is applicable to the overall rate constant of ammonia at pH <7, indicating that this oxidation pathway is not a significant sink for ammonia in acidic aqueous environments. Because of their partitioning characteristics, oxidation of DMA and DEA by OH in aerosol particles could be competitive with oxidation in the gas phase.

Precursors and Pathways Leading to Enhanced Secondary Organic Aerosol Formation during Severe Haze Episodes

Molecular analyses help to investigate the key precursors and chemical processes of secondary organic aerosol (SOA) formation. We obtained the sources and molecular compositions of organic aerosol in PM_2.5 in winter in Beijing by online and offline mass spectrometer measurements. Photochemical and aqueous processing were both involved in producing SOA during the haze events. Aromatics, isoprene, long-chain alkanes or alkenes, and carbonyls such as glyoxal and methylglyoxal were all important precursors. The enhanced SOA formation during the severe haze event was predominantly contributed by aqueous processing that was promoted by elevated amounts of aerosol water for which multifunctional organic nitrates contributed the most followed by organic compounds having four oxygen atoms in their formulae. The latter included dicarboxylic acids and various oxidation products from isoprene and aromatics as well as products or oligomers from methylglyoxal aqueous uptake. Nitrated phenols, organosulfates, and methanesulfonic acid were also important SOA products but their contributions to the elevated SOA mass during the severe haze event were minor. Our results highlight the importance of reducing nitrogen oxides and nitrate for future SOA control. Additionally, the formation of highly oxygenated long-chain molecules with a low degree of unsaturation in polluted urban environments requires further research.

Reaction Kinetics of Green Leaf Volatiles with Sulfate, Hydroxyl, and Nitrate Radicals in Tropospheric Aqueous Phase

Green plants exposed to abiotic or biotic stress release C-5 and C-6 unsaturated oxygenated hydrocarbons called Green Leaf Volatiles (GLVs). GLVs partition into tropospheric waters and react to form secondary organic aerosol (SOA). We explored the kinetics of aqueous-phase reactions of 1-penten-3-ol (PENTOL), (Z)-2-hexen-1-ol (HEXOL), and (E)-2-hexen-1-al (HEXAL) with SO4•-, •OH, and NO3•. At 298 K, the rate constants for reactions of PENTOL, HEXOL, and HEXAL with SO4•- were, respectively, (9.4 ± 1.0) × 108 L mol-1 s-1, (2.5 ± 0.3) × 109 L mol-1 s-1, and (4.8 ± 0.2) × 108 L mol-1 s-1; with •OH - (6.3 ± 0.1) × 109 L mol-1 s-1, (6.7 ± 0.3) × 109 L mol-1 s-1, and (4.8 ± 0.3) × 109 L mol-1 s-1; and with NO3• - (1.5 ± 0.15) × 108 L mol-1 s-1, (8.4 ± 2.3) × 108 L mol-1 s-1, and (3.0 ± 0.7) × 107 L mol-1 s-1. The rate constants increased weakly with temperatures ranging from 278 to 318 K. The diffusional limitations of the rate constants appeared significant only for the GLV-•OH reactions. The aqueous-phase reactions appeared negligible in deliquescent aerosol and haze water but not in clouds and rains. The atmospheric lifetimes of GLVs decreased from many days to hours with increasing liquid water content and radicals' concentration.

Iron-Facilitated Organic Radical Formation from Secondary Organic Aerosols in Surrogate Lung Fluid

Respiratory deposition of secondary organic aerosols (SOA) and iron may lead to the generation of reactive oxygen species and free radicals in lung fluid to cause oxidative stress, but their underlying mechanism and formation kinetics are not well understood. Here we demonstrate substantial formation of organic radicals in surrogate lung fluid (SLF) by mixtures of Fe2+ and SOA generated from photooxidation of isoprene, α-terpineol, and toluene. The molar yields of organic radicals by SOA are measured to be 0.03-0.5% in SLF, which are 5-10 times higher than in water. We observe that Fe2+ enhances organic radical yields dramatically by a factor of 20-80, which can be attributed to Fe2+-facilitated decomposition of organic peroxides, in consistency with a positive correlation between peroxide contents and organic radical yields. Ascorbate mediates redox cycling of iron ions to sustain organic peroxide decomposition, as supported by kinetic modeling reproducing time- and concentration-dependence of organic radical formation as well as additional experiments observing the formation of Fe2+ and ascorbate radicals in mixtures of ascorbate and Fe3+. •OH and superoxide are found to be scavenged by antioxidants efficiently. These findings have implications on the role of organic radicals in oxidative damage and lipid peroxidation.

Acidity and the multiphase chemistry of atmospheric aqueous particles and clouds

The acidity of aqueous atmospheric solutions is a key parameter driving both the partitioning of semi-volatile acidic and basic trace gases and their aqueous-phase chemistry. In addition, the acidity of atmospheric aqueous phases, e.g., deliquesced aerosol particles, cloud, and fog droplets, is also dictated by aqueous-phase chemistry. These feedbacks between acidity and chemistry have crucial implications for the tropospheric lifetime of air pollutants, atmospheric composition, deposition to terrestrial and oceanic ecosystems, visibility, climate, and human health. Atmospheric research has made substantial progress in understanding feedbacks between acidity and multiphase chemistry during recent decades. This paper reviews the current state of knowledge on these feedbacks with a focus on aerosol and cloud systems, which involve both inorganic and organic aqueous-phase chemistry. Here, we describe the impacts of acidity on the phase partitioning of acidic and basic gases and buffering phenomena. Next, we review feedbacks of different acidity regimes on key chemical reaction mechanisms and kinetics, as well as uncertainties and chemical subsystems with incomplete information. Finally, we discuss atmospheric implications and highlight the need for future investigations, particularly with respect to reducing emissions of key acid precursors in a changing world, and the need for advancements in field and laboratory measurements and model tools.

Aqueous Photochemistry of 2-Oxocarboxylic Acids: Evidence, Mechanisms, and Atmospheric Impact

Atmospheric organic aerosols play a major role in climate, demanding a better understanding of their formation mechanisms by contributing multiphase chemical reactions with the participation of water. The sunlight driven aqueous photochemistry of small 2-oxocarboxylic acids is a potential major source of organic aerosol, which prompted the investigations into the mechanisms of glyoxylic acid and pyruvic acid photochemistry reviewed here. While 2-oxocarboxylic acids can be contained or directly created in the particles, the majorities of these abundant and available molecules are in the gas phase and must first undergo the surface uptake process to react in, and on the surface, of aqueous particles. Thus, the work also reviews the acid-base reaction that occurs when gaseous pyruvic acid meets the interface of aqueous microdroplets, which is contrasted with the same process for acetic acid. This work classifies relevant information needed to understand the photochemistry of aqueous pyruvic acid and glyoxylic acid and motivates future studies based on reports that use novel strategies and methodologies to advance this field.

The enhanced mixing states of oxalate with metals in single particles in Guangzhou, China

Recently, internal mixing states of oxalate with metals in single particles have been reported from field studies, yet the role of metals in the formation processes of oxalate remains unclear due to the diversity of chemical components and complex atmospheric environment. In this study, the mixing states of oxalate with five metals, including zinc (Zn), copper (Cu), lead (Pb), vanadium (V) and iron (Fe) were investigated in Guangzhou, China. It was found that 55% of oxalate-containing particles were internally mixed with these metals. The number fraction of oxalate in the metal-containing particles ranged from 5.4-26%, which is much higher than that in the total detected particles (4.0%), indicating significant enrichment of oxalate in the metal-containing particles. Enhanced oxalate production was found in the Fe- and V-containing particles based on distinctly higher relative peak area (RPA) ratios of oxalate to its precursors compared to the total particles, possibly due to enhanced aqueous phase reactions in the Fe- and V-containing particles. However, enrichment of oxalate in the Zn-, Pb-, and Cu-containing particles was possibly associated with complexation of gas phase oxalic acid with the metals, as indicated by the small increase in RPA ratios in these particles. On the other hand, the internal mixing of oxalate with metals was found to provide a way of efficient photolysis of oxalate-metal complexes, which led to a decrease in oxalate after sunrise in the metal-containing particles. In this study, the enhanced mixing states of oxalate with metals have revealed the important role of metals in the production and degradation of oxalate, providing insights for the evaluation of metals in the formation processes of organic aerosol in field studies, which is beneficial to the further study of air pollution in metal emission areas.

Unraveling interfacial properties of organic-coated marine aerosol with lipase incorporation

Marine aerosols are believed to have an organic surface coating on which fatty acids act as an important component due to their high surface activity. In addition, various kinds of enzyme species are abundantly found in seawater, some of which have been identified to exist in marine aerosols. Herein, from the perspective of marine aerosol interface simulation, we investigate the effect of Burkholderia cepacia lipase on the surface properties of stearic acid (SA) monolayer at the air-water interface by using surface-sensitive techniques of Langmuir trough and Infrared reflection-absorption spectroscopy (IRRAS). Our findings indicate that the stearic acid film undergoes a significant expansion, especially when the lipase concentration is 500 nM, because of the incorporation of lipase as observed from the surface pressure-area (π-A) isotherms. IRRAS spectra also show reduced intensities and ordering in the methylene stretching vibration region of stearic acid as a result of low surface density and disordered packing as the enzyme concentration increases. In particular, when the concentration of lipase is 500 nM, the lowest I_as/I_s values are shown on both pure water subphase and artificial seawater subphase, indicating more gauche conformations for SA. Furthermore, SA films with lipase incorporation were also studied at three different pH of subphase environment, considering the decrease of pH caused by the reaction with acidic gases during the aerosol aging process. The results reflect a more pronounced expansion of SA monolayer in acidic environment at pH 2.5, suggesting that hydrophobic interaction plays an important role in the disorder of the SA monolayer. In view of the coexistence of fatty acids and enzymes in the marine environment, this study provides a further understanding of the surface organization and behavior of organic-coated marine aerosols and deepen the knowledge of lipid-enzyme interfacial interactions occurring in the atmosphere.

Rate constants of dichloride radical anion reactions with molecules of environmental interest in aqueous solution: a review

Natural waters, water droplets in the air at coastal regions and wastewaters usually contain chloride ions (Cl-) in relatively high concentrations in the milimolar range. In the reactions of highly oxidizing radicals (e.g., •OH, •NO3, or SO4•-) in the nature or during wastewater treatment in advanced oxidation processes the chloride ions easily transform to chlorine containing radicals, such as Cl•, Cl2•-, and ClO•. This transformation basically affects the degradation of organic molecules. In this review about 400 rate constants of the dichloride radical anion (Cl2•-) with about 300 organic molecules is discussed together with the reaction mechanisms. The reactions with phenols, anilines, sulfur compounds (with sulfur atom in lower oxidation state), and molecules with conjugated electron systems are suggested to take place with electron transfer mechanism. The rate constant is high (107-109 M-1 s-1) when the reduction potential the one-electron oxidized species/molecule couple is well below that of the Cl2•-/2Cl- couple.

Ubiquitous Production of Organosulfates During Treatment of Organic Contaminants with Sulfate Radicals

Oxidation of organic contaminants by sulfate radical (SO₄ ^•-) is becoming more popular for the treatment of hazardous waste sites by in situ chemical oxidation (ISCO) and industrial wastewater by advanced oxidation processes (AOPs). It is well documented that SO₄ ^•- can produce similar oxygen-containing transformation products as hydroxyl radical-based treatment processes, but SO₄ ^•- also has the potential to produce organosulfates by radical addition. Experiments conducted with a suite of 23 aromatic and 5 aliphatic compounds, including several contaminants typically detected at hazardous waste sites, demonstrated the formation of at least one stable sulfate-containing product for 25 of the compounds. These compounds likely exhibit higher mobility in the subsurface due to a lower affinity for surfaces (e.g., aquifer solids, activated carbon) than most other transformation products. Although the health risks associated with organosulfates are still uncertain, some aromatic organosulfates produced in this study (i.e. phenyl sulfate and p-cresyl sulfate) are known to be harmful uremic toxins. Further study of organosulfate formation, fate, and toxicity is needed before SO₄ ^•--based treatment processes are more widely employed.

Aromatic Carbonyl and Nitro Compounds as Photosensitizers and Their Photophysical Properties in the Tropospheric Aqueous Phase

Secondary organic aerosol formation in the atmospheric aqueous/particulate phase by photosensitized reactions is currently subject to uncertainties. To understand the impact of photosensitized reactions, photophysical and -chemical properties of photosensitizers, kinetic data, and reaction mechanisms of these processes are required. The photophysical properties of acetophenones, benzaldehydes, benzophenones, and naphthalenes were investigated in aqueous solution using laser flash excitation. Quantum yields of excited photosensitizers were determined giving values between 0.06-0.80 at 298 K and pH = 5. Molar absorption coefficients (ε_max(³PS*) = (0.8-13) × 10⁴ L mol^-1 cm^-1), decay rate constants in water (k_1st = (9.4 ± 0.5) × 10² to (2.2 ± 0.1) × 10⁵ s^-1), and quenching rate constants with oxygen (k_q(O₂) = (1.7 ± 0.1-4.4 ± 0.4) × 10⁹ L mol^-1 s^-1) of the excited triplet states were determined at 298 K and pH = 5. Photosensitized reactions of carboxylic acids and alkenes show second-order rate constants in the range of (37 ± 7.0-0.55 ± 0.1) × 10⁴ and (27 ± 5.0-0.04 ± 0.01) × 10⁸ L mol^-1 s^-1. The results show that different compound classes act differently as a photosensitizer and can be a sink for certain organic compounds in the atmospheric aqueous phase.

High Pressure Inside Nanometer-Sized Particles Influences the Rate and Products of Chemical Reactions

The composition of organic aerosol has a pivotal influence on aerosol properties such as toxicity and cloud droplet formation capability, which could affect both climate and air quality. However, a comprehensive and fundamental understanding of the chemical and physical processes that occur in nanometer-sized atmospheric particles remains a challenge that severely limits the quantification and predictive capabilities of aerosol formation pathways. Here, we investigated the effects of a fundamental and hitherto unconsidered physical property of nanoparticles-the Laplace pressure. By studying the reaction of glyoxal with ammonium sulfate, both ubiquitous and important atmospheric constituents, we show that high pressure can significantly affect the chemical processes that occur in atmospheric ultrafine particles (i.e., particles < 100 nm). Using high-resolution mass spectrometry and UV-vis spectroscopy, we demonstrated that the formation of reaction products is strongly (i.e., up to a factor of 2) slowed down under high pressures typical of atmospheric nanoparticles. A size-dependent relative rate constant is determined and numerical simulations illustrate the reduction in the production of the main glyoxal reaction products. These results established that the high pressure inside nanometer-sized aerosols must be considered as a key property that significantly impacts chemical processes that govern atmospheric aerosol growth and evolution.

Application of smog chambers in atmospheric process studies

Smog chamber experimental systems, which have been widely used in laboratory simulation for studying atmospheric processes, are comprehensively reviewed in this paper. The components, development history, main research topics and main achievements of smog chambers are introduced. Typical smog chambers in the world, including their volumes, wall materials, light sources and features, are summarized and compared. Key factors of smog chambers and their influences on the simulation of the atmospheric environment are discussed, including wall loss, wall emission and background pollutants. The features of next-generation smog chambers and their application prospect in future studies of the atmospheric environment are also outlined in this paper.

Effect of common inorganic anions on iron-catalyzed secondary brown carbon formation from guaiacol

Brown carbon (BrC) is the important component of aerosol with strong UV-visible absorbance. However, the formation of BrC is still elusive. Inorganic anions, e.g., Cl^-, NO₃^- and SO₄^2-, exist ubiquitously in the atmosphere, while their effects on the formation of BrC are poorly understood. In this study, we have systematically investigated the effects of pH (1, 2 and 3), inorganic anion (Cl^-, NO₃^- and SO₄^2-) and ionic strength (0.1, 0.5 and 1.0 M) on BrC generation process by measuring the optical, aggregation and product properties. Our results clearly show that the three factors strongly affect the BrC formation by influencing the oxidation activity and the complexation capability of different Fe(III) species. Marcus theory was used in this research to calculate the oxidation activity of different Fe(III) species. Among all the species of Fe(III), FeOH²⁺ is the most reactive form in the BrC formation reaction. Furthermore, the aggregation process of BrC was also studied, which is affected by different anions due to their different concentration and hydrability, and SO₄^2- exhibits the highest efficiency to induce the aggregation of BrC. This study will deepen our understanding about the natural formation of BrC under environmentally relevant conditions, and be beneficial for controlling the production of atmospheric particulates and the subsequent health effects.

Exploring the inorganic and organic nitrate aerosol formation regimes at a suburban site on the North China Plain

Nitrate-driven aerosol pollution frequently occurs during winter over the North China Plain (NCP). Extensive studies have focused on inorganic nitrate formation, but few have focused on organic nitrates in China, precluding a thorough understanding of the nitrogen cycle and nitrate aerosol formation. Here, the inorganic (NO_3,inorg) and organic nitrate (NO_3,org) formation regimes under aerosol liquid water (ALW) and aerosol acidity (pH) influences were investigated during winter over the NCP based on data derived from an Aerodyne high-resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS). The campaign-averaged concentration of the total nitrate was 5.3 μg m^-3, with a 13% contribution from NO_3,org, which exhibited a significantly decreased contribution with increasing haze episode evolution. The diurnal cycles of NO_3,inorg and NO_3,org were similar, with high concentrations during the nighttime at a high ALW level, revealing the important role of aqueous-phase processes. However, the correlations between the aerosol pH and NO_3,inorg (R² = 0.13, P < 0.01) and NO_3,org (R² = 0.63, P < 0.01) during polluted periods indicated a contrasting effect of aerosol pH on inorganic and organic nitrate formation. Our results provide a useful reference for smog chamber studies and promote a better understanding of organic nitrate formation via anthropogenic emissions.

Kinetics and Mass Yields of Aqueous Secondary Organic Aerosol from Highly Substituted Phenols Reacting with a Triplet Excited State

Biomass burning emits large amounts of phenols, which can partition into cloud/fog drops and aerosol liquid water (ALW) and react to form aqueous secondary organic aerosol (aqSOA). Triplet excited states of organic compounds (³C*) are likely oxidants, but there are no rate constants with highly substituted phenols that have high Henry's law constants (K_H) and are likely important in ALW. To address this gap, we investigated the kinetics of six highly substituted phenols with the triplet excited state of 3,4-dimethoxybenzaldehyde. Second-order rate constants at pH 2 are all fast, (2.6-4.6) × 10⁹ M^-1 s^-1, while values at pH 5 are 2-5 times smaller. Rate constants are reasonably described by a quantitative structure-activity relationship with phenol oxidation potentials, allowing rate constants of other phenols to be predicted. Triplet-phenol kinetics are unaffected by ammonium sulfate, sodium chloride, galactose (a biomass-burning sugar), or Fe(III). In contrast, ammonium nitrate increases the rate of phenol loss by making hydroxyl radicals, while Cu(II) inhibits phenol decay. Mass yields of aqueous SOA from triplet reactions are large and range from 59 to 99%. Calculations using our data along with previous oxidant measurements indicate that phenols with high K_H can be an important source of aqSOA in ALW, with ³C* typically the dominant oxidant.