The mechanism of proton conduction in phosphoric acid

Asymmetric Hydrophosphonylation of Imines to Construct Highly Stable Covalent Organic Frameworks with Efficient Intrinsic Proton Conductivity

Imine-linked covalent organic frameworks (COFs) have received widespread attention because of their structure features such as high crystallinity and tunable pores. However, the intrinsic reversibility of the imine bond leads to the poor stability of imine-linked COFs under strong acid conditions. Also, their thermal stability is significantly lower than that of many other COFs. Herein, we report for the first time that the reversible imine bonds in the skeleton of COFs can be locked through the asymmetric hydrophosphonylation reaction of phosphite. The functionalized COFs not only retain the crystallinity and porous structure but also exhibit evidently improved chemical and thermal stabilities. In addition, the phosphorous acid groups generated by acidic hydrolysis attached to the skeleton endow the COFs with good intrinsic proton conductivity. Due to the diversity of phosphite derivatives and imine-linked COFs, this work may provide an avenue for extending the COF structures and functions through the asymmetric hydrophosphonylation reaction.

Acid-in-Clay Electrolyte for Wide-Temperature-Range and Long-Cycle Proton Batteries

Proton conduction underlies many important electrochemical technologies. A family of new proton electrolytes is reported: acid-in-clay electrolyte (AiCE) prepared by integrating fast proton carriers in a natural phyllosilicate clay network, which can be made into thin-film (tens of micrometers) fluid-impervious membranes. The chosen example systems (sepiolite-phosphoric acid) rank top among the solid proton conductors in terms of proton conductivities (15 mS cm^-1 at 25 °C, 0.023 mS cm^-1 at -82 °C), electrochemical stability window (3.35 V), and reduced chemical reactivity. A proton battery is assembled using AiCE as the solid electrolyte membrane. Benefitting from the wider electrochemical stability window, reduced corrosivity, and excellent ionic selectivity of AiCE, the two main problems (gassing and cyclability) of proton batteries are successfully solved. This work draws attention to the element cross-over problem in proton batteries and the generic "acid-in-clay" solid electrolyte approach with superfast proton transport, outstanding selectivity, and improved stability for room- to cryogenic-temperature protonic applications.

Serum Metabonomics Reveals Risk Factors in Different Periods of Cerebral Infarction in Humans

Studies of key metabolite variations and their biological mechanisms in cerebral infarction (CI) have increased our understanding of the pathophysiology of the disease. However, how metabolite variations in different periods of CI influence these biological processes and whether key metabolites from different periods may better predict disease progression are still unknown. We performed a systematic investigation using the metabonomics method. Various metabolites in different pathways were investigated by serum metabolic profiling of 143 patients diagnosed with CI and 59 healthy controls. Phe-Phe, carnitine C18:1, palmitic acid, cis-8,11,14-eicosatrienoic acid, palmitoleic acid, 1-linoleoyl-rac-glycerol, MAG 18:1, MAG 20:3, phosphoric acid, 5α-dihydrotestosterone, Ca, K, and GGT were the major components in the early period of CI. GCDCA, glycocholate, PC 36:5, LPC 18:2, and PA showed obvious changes in the intermediate time. In contrast, trans-vaccenic acid, linolenic acid, linoleic acid, all-cis-4,7,10,13,16-docosapentaenoic acid, arachidonic acid, DHA, FFA 18:1, FFA 18:2, FFA 18:3, FFA 20:4, FFA 22:6, PC 34:1, PC 36:3, PC 38:4, ALP, and Crea displayed changes in the later time. More importantly, we found that phenylalanine metabolism, medium-chain acylcarnitines, long-chain acylcarnitines, choline, DHEA, LPC 18:0, LPC 18:1, FFA 18:0, FFA 22:4, TG, ALB, IDBIL, and DBIL played vital roles in the development of different periods of CI. Increased phenylacetyl-L-glutamine was detected and may be a biomarker for CI. It was of great significance that we identified key metabolic pathways and risk metabolites in different periods of CI different from those previously reported. Specific data are detailed in the Conclusion section. In addition, we also explored metabolite differences of CI patients complicated with high blood glucose compared with healthy controls. Further work in this area may inform personalized treatment approaches in clinical practice for CI by experimentally elucidating the pathophysiological mechanisms.

Molecular dynamics simulations of proton conducting mediums containing phosphoric acid

An anhydrous proton conducting electrolyte is a key material to realise medium-temperature fuel cells that can drastically simplify heat radiation systems in transportation applications. However, practical applications are limited by...

Hydrated Metal Ions as Weak Bronsted Acids Show the Promoting Effects in Proton Conduction

It is well-known that the hydrated metal ions can act as Bronsted acids, which tend to donate protons increasing the acidic proton concentration in materials, as well as the proton...

Zwitterionic Covalent Organic Frameworks: Attractive Porous Host for Gas Separation and Anhydrous Proton Conduction

Ionic covalent organic frameworks (COFs) consisting of an anionic or cationic skeleton and corresponding counterions have demonstrated great potential in many application fields such as ion conduction, molecular separation, and catalysis. However, arranging anionic and cationic groups into the same COF to form zwitterionic materials is still unexplored. Herein we design the synthesis of three zwitterionic COFs as attractive porous hosts for SO₂/CO₂ separation and anhydrous proton conduction. The separated cationic and anionic groups in zwitterionic COFs' channels can act as two different polar sites for SO₂ adsorption, allowing zwitterionic COFs to achieve a high SO₂ adsorption capacity (216 mL/g, 298 K) and impressive SO₂/CO₂ selectivity (118, 298 K). Furthermore, after loading with triazole/imidazole, the zwitterionic groups in COFs' channels can induce complete proton carrier deprotonation, producing more freely migrating protons. The free protons migrate along a continuous hydrogen-bonding network in zwitterionic COFs' channels, leading to outstanding anhydrous proton conductivity up to 4.38 × 10^-2 S/cm, which is much higher than other N-heterocyclic-doped porous materials under anhydrous conditions. Proton dissociation energy calculations combined with frequency-dependent dielectric analysis give insight into the role of zwitterionic COFs for proton conductivity. Our work provides the possibility to design well-defined zwitterionic frameworks for gas separation and ion conduction.

MOFs in the time domain

Many of the proposed applications of metal-organic framework (MOF) materials may fail to materialize if the community does not fully address the difficult fundamental work needed to map out the 'time gap' in the literature - that is, the lack of investigation into the time-dependent behaviours of MOFs as opposed to equilibrium or steady-state properties. Although there are a range of excellent investigations into MOF dynamics and time-dependent phenomena, these works represent only a tiny fraction of the vast number of MOF studies. This Review provides an overview of current research into the temporal evolution of MOF structures and properties by analysing the time-resolved experimental techniques that can be used to monitor such behaviours. We focus on innovative techniques, while also discussing older methods often used in other chemical systems. Four areas are examined: MOF formation, guest motion, electron motion and framework motion. In each area, we highlight the disparity between the relatively small amount of (published) research on key time-dependent phenomena and the enormous scope for acquiring the wider and deeper understanding that is essential for the future of the field.

Modeling Potential-Dependent Electrochemical Activation Barriers: Revisiting the Alkaline Hydrogen Evolution Reaction

Accurate theoretical simulation of electrochemical activation barriers is key to understanding electrocatalysis and guides the design of more efficient catalysts. Providing a detailed picture of proton transfer processes encounters several challenges: the constant potential requirement during charge transfer, the different time scales involved in the processes, and the thermal fluctuation of the solvent. Hence, it is prohibitively expensive computationally to apply density functional theory (DFT) calculations in modeling the potential-dependent activation barrier at the electrode-solvent interface, and the results are dubious. To address these challenges, we have developed an analytical approach based on charge conservation and decoupled potential energy surfaces to compute charge transfer barriers. The method makes it possible to simulate an electrochemical process at different potentials and explicitly include thermal fluctuations of the solvent at the electrode-solvent interface. We use the Pt-catalyzed alkaline hydrogen evolution reaction (HER) as our benchmark reaction, and we model the microkinetics of HER with consideration of the spatial fluctuations between the metal surface and the first solvent layer at room temperature. The distribution of water-metal distances has a large effect on the barriers of the charge transfer processes, and an accurate account of the statistical fluctuation in the reaction network leads to a several orders of magnitude increase in HER current as compared to transfer from a static solvent. The trends of the different reaction mechanisms in HER were successfully simulated with our model, and the theoretical I-V curves obtained are in good qualitative agreement with experimental results.

Controllable Synthesis and Performance Modulation of 2D Covalent-Organic Frameworks

Covalent-organic frameworks (COFs) are especially interesting and unique as their highly ordered topological structures entirely built from plentiful π-conjugated units through covalent bonds. Arranging tailorable organic building blocks into periodically reticular skeleton bestows predictable lattices and various properties upon COFs in respect of topology diagrams, pore size, properties of channel wall interfaces, etc. Indeed, these peculiar features in terms of crystallinity, conjugation degree, and topology diagrams fundamentally decide the applications of COFs including heterogeneous catalysis, energy conversion, proton conduction, light emission, and optoelectronic devices. Additionally, this research field has attracted widespread attention and is of importance with a major breakthrough in recent year. However, this research field is running with the lack of summaries about tailorable construction of 2D COFs for targeted functionalities. This review first covers some crucial polymeric strategies of preparing COFs, containing boron ester condensation, amine-aldehyde condensation, Knoevenagel condensation, trimerization reaction, Suzuki CC coupling reaction, and hybrid polycondensation. Subsequently, a summary is made of some representative building blocks, and then underlines how the electronic and molecular structures of building blocks can strongly influence the functional performance of COFs. Finally, conclusion and perspectives on 2D COFs for further study are proposed.

Suitable acid groups and density in electrolytes to facilitate proton conduction

Proton conducting materials suffer from low proton conductivity under low-relative humidity (RH) conditions. Previously, it was reported that acid-acid interactions, where acids interact with each other at close distances, can facilitate proton conduction without water movement and are promising for overcoming this drawback [T. Ogawa, H. Ohashi, T. Tamaki and T. Yamaguchi, Chem. Phys. Lett., 2019, 731, 136627]. However, acid groups have not been compared to find a suitable acid group and density for the interaction, which is important to experimentally synthesize the material. Here, we performed ab initio calculations to identify acid groups and acid densities as a polymer design that effectively causes acid-acid interactions. The evaluation method employed parameters based on several different optimized coordination interactions of acids and water molecules. The results show that the order of the abilities of polymer electrolytes to readily induce acid-acid interactions is hydrocarbon-based phosphonated polymers > phosphonated aromatic hydrocarbon polymers > perfluorosulfonic acid polymers ≈ perfluorophosphonic acid polymers > sulfonated aromatic hydrocarbon polymers. The acid-acid interaction becomes stronger as the distance between acids decreases. The preferable distance between phosphonate moieties is within 13 Å.

Characterizing and Contrasting Structural Proton Transport Mechanisms in Azole Hydrogen Bond Networks Using Ab Initio Molecular Dynamics

Imidazole and 1,2,3-triazole are promising hydrogen-bonded heterocycles that conduct protons via a structural mechanism and whose derivatives are present in systems ranging from biological proton channels to proton exchange membrane fuel cells. Here, we leverage multiple time-stepping to perform ab initio molecular dynamics of imidazole and 1,2,3-triazole at the nanosecond time scale. We show that despite the close structural similarities of these compounds, their proton diffusion constants vary by over an order of magnitude. Our simulations reveal the reasons for these differences in diffusion constants, which range from the degree of hydrogen-bonded chain linearity to the effect of the central nitrogen atom in 1,2,3-triazole on proton transport. In particular, we uncover evidence of two "blocking" mechanisms in 1,2,3-triazole, where covalent and hydrogen bonds formed by the central nitrogen atom limit the mobility of protons. Our simulations thus provide insights into the origins of the experimentally observed 10-fold difference in proton conductivity.

A Review of Recent Developments and Advanced Applications of High-Temperature Polymer Electrolyte Membranes for PEM Fuel Cells

This review summarizes the current status, operating principles, and recent advances in high-temperature polymer electrolyte membranes (HT-PEMs), with a particular focus on the recent developments, technical challenges, and commercial prospects of the HT-PEM fuel cells. A detailed review of the most recent research activities has been covered by this work, with a major focus on the state-of-the-art concepts describing the proton conductivity and degradation mechanisms of HT-PEMs. In addition, the fuel cell performance and the lifetime of HT-PEM fuel cells as a function of operating conditions have been discussed. In addition, the review highlights the important outcomes found in the recent literature about the HT-PEM fuel cell. The main objectives of this review paper are as follows: (1) the latest development of the HT-PEMs, primarily based on polybenzimidazole membranes and (2) the latest development of the fuel cell performance and the lifetime of the HT-PEMs.

Pathways towards Boosting Solar-Driven Hydrogen Evolution of Conjugated Polymers

Photocatalytic H₂ evolution under solar illumination has been considered to be a promising technology for green energy resources. Developing highly efficient photocatalysts for photocatalytic water splitting is long-term desired but still challenging. Conjugated polymers (CPs) have attracted ongoing attention and have been considered to be promising alternatives for solar-driven H₂ production due to the excellent merits of the large π-conjugated system, versatile structures, tunable photoelectric properties, and well-defined chemical composites. The excellent merits have offered numerous methods for boosting photocatalytic hydrogen evolution (PHE) of initial CP-based photocatalysts, whose apparent quantum yield is dramatically increased from <1 to >20% in recent five years. According to the photocatalytic mechanism, this review herein systematically summarizes three major strategies for boosting photocatalytic H₂ production of CPs: 1) enhancing visible light absorption, 2) suppressing recombination of electron-hole pairs, and 3) boosting surface catalytic reaction, mainly involving eleven methods, that is, copolymerization, modifying cross-linker, constructing a donor-acceptor structure, functionalization, fabricating organic heterojunction, loading cocatalyst, and surface modification. Finally, the perspectives towards the future development of PHE are proposed.

The relationship between charge and molecular dynamics in viscous acid hydrates

Oscillatory shear rheology has been employed to access the structural rearrangements of deeply supercooled sulfuric acid tetrahydrate (SA4H) and phosphoric acid monohydrate, the latter in protonated (PA1H) and deuterated (PA1D) forms. Their viscoelastic responses are analyzed in relation to their previously investigated electric conductivity. The comparison of the also presently reported dielectric response of deuterated sulfuric acid tetrahydrate (SA4D) and that of its protonated analog SA4H reveals an absence of isotope effects for the charge transport in this hydrate. This finding clearly contrasts with the situation known for PA1H and PA1D. Our analyses also demonstrate that the conductivity relaxation profiles of acid hydrides closely resemble those exhibited by classical ionic electrolytes, even though the charge transport in phosphoric acid hydrates is dominated by proton transfer processes. At variance with this dielectric simplicity, the viscoelastic responses of these materials depend on their structural compositions. While SA4H displays a "simple liquid"-like viscoelastic behavior, the mechanical responses of PA1H and PA1D are more complex, revealing relaxation modes, which are faster than their ubiquitous structural rearrangements. Interestingly, the characteristic rates of these fast mechanical relaxations agree well with the characteristic frequencies of the charge rearrangements probed in the dielectric investigations, suggesting appearance of a proton transfer in mechanical relaxation of phosphoric acid hydrates. These findings open the exciting perspective of exploiting shear rheology to access not only the dynamics of the matrix but also that of the charge carriers in highly viscous decoupled conductors.

Ion and Proton Transport In Aqueous/Nonaqueous Acidic Ionic Liquids for Fuel-Cell Applications-Insight from High-Pressure Dielectric Studies

The use of acidic ionic liquids and solids as electrolytes in fuel cells is an emerging field due to their efficient proton conductivity and good thermal stability. Despite multiple reports describing conducting properties of acidic ILs, little is known on the charge-transport mechanism in the vicinity of liquid-glass transition and the structural factors governing the proton hopping. To address these issues, we studied two acidic imidazolium-based ILs with the same cation, however, different anions-bulk tosylate vs small methanesulfonate. High-pressure dielectric studies of anhydrous and water-saturated materials performed in the close vicinity of T_g have revealed significant differences in the charge-transport mechanism in these two systems being undetectable at ambient conditions. Thereby, we demonstrated the effect of molecular architecture on proton hopping, being crucial in the potential electrochemical applications of acidic ILs.

Nanostructured high-performance electrolyte membranes based on polymer network post-assembly for high-temperature supercapacitors

The development of high-temperature supercapacitors highly relies on the explore of stable polymer electrolyte membranes (PEMs) with high ionic conductivities at high-temperature conditions. However, it is a challenge to achieve both high stability and high conductivity in a PEM at elevated temperatures. Herein, we report the fabrication of high-performance proton conductive PEMs suitable for high-temperature supercapacitors (HT-SCs), which is based on a post-assembly strategy to control the rearrangement of polymer networks in the PEMs. This strategy can create cross-linked PEMs with bicontinuous nanostructures, as well as highly stable and highly conductive features. Specifically, a series of bicontinuous PEMs are prepared by the controllable cross-linking of poly(ether-ether-ketone) and poly(4-vinylpyridine), followed by the inducement of phosphoric acid. These PEMs exhibit both a high proton conductivity of 70 mS cm^-1 and a high modulus of 39.3 MPa at 150 ℃, which can serve as high-performance electrolytes. The HT-SCs based on these PEMs display a specific capacitance of 138.0 F g^-1 and a high capacitance retention of 80.0% after 2500 galvanostatic charge-discharge cycles at 150 ℃, exhibiting excellent high-temperature capacitance and cycle stability. This post-assembly concept can provide a new route to design high-performance PEMs for HT-SC and other energy device applications.

Multifunctional Enhancement of Proton-Conductive, Stretchable, and Adhesive Performance in Hybrid Polymer Electrolytes by Polyoxometalate Nanoclusters

High ionic conductivity, good mechanical strength, strong electrode adhesion, and low volatilization are highly desired properties for flexible solid electrolytes. However, it is difficult to realize all these properties simultaneously, which needs a rational synergy of different electrolyte constituents. Here, we present the use of polyoxometalates as versatile enhancers to fabricate nonvolatile flexible hybrid polymer electrolytes with improved conductive, stretchable, and adhesive properties. These electrolytes are based on the molecular hybridization of a polyacrylate elastomer, phosphoric acid, and a commercial polyoxometalate H₃PW₁₂O₄₀ (PW). PW can serve as a nanosized plasticizer to favor the chain relaxation of polyacrylate and improve stretchability. Meanwhile, PW as a solid acid can increase the proton concentration and form a hybrid hydrogen-bonding network to facilitate proton conduction. Besides, the strong adsorption ability of PW on solid surfaces enables the electrolytes with enhanced adhesion. The hybrid electrolyte with 30 wt % PW shows a break stress of 0.28 MPa, a break elongation of 990%, and a conductivity of 0.01 S cm^-1 at 298 K, which are 1.8, 1.8, and 2.5 times higher compared to the case without PW, respectively. Moreover, PW enhances the adhesive strength of hybrid electrolytes on polypropylene, steel, and glass substrates. The flexible supercapacitors based on the hybrid electrolytes and polyaniline electrodes hold a stable electrode-electrolyte interface and exhibit a high specific capacitance of 592 mF cm^-2 and an excellent capacitance retention of 84% after 6000 charge-discharge cycles. These results demonstrate great potential of polyoxometalates as multifunctional enhancers to design hybrid electrolyte materials for energy and electronic applications.

Preparation and Characterization of a Novel Sulfonated Titanium Oxide Incorporated Chitosan Nanocomposite Membranes for Fuel Cell Application

In this study, nano-TiO₂ sulfonated with 1,3-propane sultone (STiO₂) was incorporated into the chitosan (CS) matrix for the preparation of CS/STiO₂ nanocomposite membranes for fuel cell applications. The grafting of sulfonic acid (–SO₃H) groups was confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis and energy-dispersive X-ray spectroscopy. The physicochemical properties of these prepared membranes, such as water uptake, swelling ratio, thermal and mechanical stability, ion exchange capacity and proton conductivity, were determined. The proton conducting groups on the surface of nano-TiO₂ can form continuous proton conducting pathways along the CS/STiO₂ interface and thus improve the proton conductivity of CS/STiO₂ nanocomposite membranes. The CS/STiO₂ nanocomposite membrane with 5 wt% of sulfonated TiO₂ showed a proton conductivity (0.035 S·cm⁻¹) equal to that of commercial Nafion 117 membrane (0.033 S·cm⁻¹). The thermal and mechanical stability of the nanocomposite membranes were improved because the interfacial interaction between the -SO₃H group of TiO₂ and the –NH₂ group of CS can restrict the mobility of CS chains to enhance the thermal and mechanical stability of the nanocomposite membranes. These CS/STiO₂ nanocomposite membranes have promising applications in proton exchange membrane fuel cells.

Effect of monovalent and divalent ion solutions as washing agents on the removal of Sr and Cs from soil near a nuclear power plant

Solutions of monovalent and divalent ions, including calcium, magnesium, ammonium, and potassium, were tested in the removal of Sr and Cs from soil near a nuclear power plant. The Ca²⁺ and K⁺ solutions exhibited removal efficiencies of 68.2% and 81.3% for Sr and Cs, respectively. This high performance was probably due to the physicochemical similarities between 'Ca and Sr' and 'K and Cs'. Alternatively, the Mg²⁺ and NH₄⁺ solutions performed much worse, despite having the same valences as Ca²⁺ and K⁺, respectively. Ca²⁺ and K⁺ solutions could also simultaneously remove cationic toxic metals present with the nuclides, albeit much less efficiently (30-40%). For anionic metalloid As and anionic toxic metal Cr, the efficiency was even lower (< 20%). The five-step sequential extraction experiment confirmed that all chemical forms of Sr and Cs, except the residual form, were extensively removed by the Ca²⁺ and K⁺ solutions^, respectively. For comparison, widely used washing agents exhibited removal efficiencies of 25-30%. Notably, Fe²⁺ and Mn²⁺ ions were hardly detected in the Ca²⁺ solution, while their concentrations were much higher in the common washing agents, suggesting the involvement of an ion-exchange mechanism in Sr and Cs removal, rather than a Fe/Mn oxide dissolution mechanism.

Progress in neutron techniques: towards improved polymer electrolyte membranes for energy devices

Design and implementation of advanced membrane formulations for selective transport of ions and molecular species are critical for creating the next generations of fuel cells and separation devices. It is necessary to understand the detailed transport mechanisms over time- and length-scales relevant to the device operation, both in laboratory models and in working systems under realistic operational conditions. Neutron scattering techniques including quasi-elastic neutron scattering, reflectivity and imaging are implemented at beamline stations at reactor and spallation source facilities worldwide. With the advent of new and improved instrument design, detector methodology, source characteristics and data analysis protocols, these neutron scattering techniques are emerging as a primary tool for research to design, evaluate and implement advanced membrane technologies for fuel cell and separation devices. Here we describe these techniques and their development and implementation at the ILL reactor source (Institut Laue-Langevin, Grenoble, France) and ISIS Neutron and Muon Spallation source (Harwell Science and Technology Campus, UK) as examples. We also mention similar developments under way at other facilities worldwide, and describe approaches such as combining optical with neutron Raman scattering and x-ray absorption with neutron imaging and tomography, and carrying out such experiments in specialised fuel cells designed to mimic as closely possible actualoperandoconditions. These experiments and research projects will play a key role in enabling and testing new membrane formulations for efficient and sustainable energy production/conversion and separations technologies.

Coincident angle-resolved state-selective photoelectron spectroscopy of acetylene molecules: a candidate system for time-resolved dynamics

The acetylene-vinylidene system serves as a benchmark for investigations of ultrafast dynamical processes where the coupling of the electronic and nuclear degrees of freedom provides a fertile playground to explore the femto- and sub-femto-second physics with coherent extreme-ultraviolet (EUV) photon sources both on the table-top as well as free-electron lasers. We focus on detailed investigations of this molecular system in the photon energy range 19-40 eV where EUV pulses can probe the dynamics effectively. We employ photoelectron-photoion coincidence (PEPICO) spectroscopy to uncover hitherto unrevealed aspects of this system. In this work, the role of excited states of the C2H2+ cation, the primary photoion, is specifically addressed. From photoelectron energy spectra and angular distributions, the nature of the dissociation and isomerization channels is discerned. Exploiting the 4π-collection geometry of the velocity map imaging spectrometer, we not only probe pathways where the efficiency of photoionization is inherently high but also perform PEPICO spectroscopy on relatively weak channels.

Potential carbon nanomaterials as additives for state-of-the-art Nafion electrolyte in proton-exchange membrane fuel cells: a concise review

Proton-exchange membrane fuel cells (PEMFCs) have received great attention as a potential alternative energy device for internal combustion engines due to their high conversion efficiency compared to other fuel cells. The main hindrance for the wide commercial adoption of PEMFCs is the high cost, low proton conductivity, and high fuel permeability of the state-of-the-art Nafion membrane. Typically, to improve the Nafion membrane, a wide range of strategies have been developed, in which efforts on the incorporation of carbon nanomaterial (CN)-based fillers are highly imperative. Even though many research endeavors have been achieved in relation to CN-based fillers applicable for Nafion, still their collective summary has rarely been reported. This review aims to outline the mechanisms involved in proton conduction in proton-exchange membranes (PEMs) and the significant requirements of PEMs for PEMFCs. This review also emphasizes the improvements achieved in the proton conductivity, fuel barrier properties, and PEMFC performance of Nafion membranes by incorporating carbon nanotubes, graphene oxide, and fullerene as additives.

In Situ-Doped Superacid in the Covalent Triazine Framework Membrane for Anhydrous Proton Conduction in a Wide Temperature Range from Subzero to Elevated Temperature

Synthesis of solid-state proton-conducting membranes with low activation energy and high proton conductivity under anhydrous conditions is a great challenge. Here, we show a simple and convenient way to prepare covalent triazine framework membranes (CTF-Mx) with acid in situ doping for anhydrous proton conduction in a wide temperature range from subzero to elevated temperature (160 °C). The low proton dissociation energy and continuous hydrogen bond network in CTF-Mx make the membrane achieve high proton conductivity from 1.21×10^-3 S cm^-1 (-40 °C) to 2.08×10^-2 S cm^-1 (160 °C) under anhydrous conditions. Molecular dynamics and proton relaxation time analyses reveal proton hopping at low activation energies with greatly enhanced mobility in the CTF membranes.

Switching between Proton Vacancy and Excess Proton Transfer Pathways in the Reaction between 7-Hydroxyquinoline and Formate

Bifunctional or amphoteric photoacids simultaneously present donor (acidic) and acceptor (basic) properties making them useful tools to analyze proton transfer reactions. In protic solvents, the proton exchange between the acid and the base is controlled by the acidity or basicity strength and typically occurs on two different pathways known as protolysis and hydrolysis. We report here how the addition of a formate base will alter the relative importance of the possible reaction pathways of the bifunctional photoacid 7-hydroxyquinoline (7HQ), which has been recently understood to predominantly involve a hydroxide/methoxide transport mechanism between the basic proton-accepting quinoline nitrogen site toward the proton-donating OH group with a time constant of 360 ps in deuterated methanol (CD₃OD). We follow the reaction dynamics by probing the IR-active marker modes of the different charged forms of photoexcited 7HQ, and of formic acid (HCOOD) in CD₃OD solution. A comparison of the transient IR spectra as a function of formate concentration, and classical molecular dynamics simulations enables us to identify distinct contributions of “tight” (meaning “contact”) and “loose” (i.e., “solvent-separated”) 7HQ–formate reaction pairs in our data. Our results suggest that depending on the orientation of the OH group with respect to the quinoline aromatic ring system, the presence of the formate molecule in a proton relay pathway facilitates a net proton transfer from the proton-donating OH group of 7HQ-N* via the methanol/formate bridge toward the quinoline N site.

Dynamics studied by Quasielastic Neutron Scattering (QENS)

Quasielastic neutron scattering (QENS) allows measurement of the molecular displacements in time and space, from pico- to tens of nanoseconds and from Ångstroms to nanometers, respectively. The method probes dynamics from fast vibrational modes down to slow diffusive motion. Every scattering experiment leads to a dynamic structure factor $$S\left( {\vec Q,\omega } \right)$$ S Q → , ω or its spatial and temporal Fourier transform (van Hove correlation function $$G\left( {\vec r,t} \right)$$ G r → , t ). This shows exactly where the atoms are and how they move. In this manuscript the basics of the QENS method are presented and a few examples highlighting the potentials of QENS are given: (i) diffusion of liquids and gases in nano- and mesoporous materials; (ii) hydrogen dynamics in a high temperature polymer electrolyte fuel cell (HT-PEFC) and (iii) influence of the surface interactions on polymer dynamics in nanopores.

Precise Molecular-Level Modification of Nafion with Bismuth Oxide Clusters for High-performance Proton-Exchange Membranes

Fabricating proton exchange membranes (PEMs) with high ionic conductivity and ideal mechanical robustness through regulation of the membrane microstructures achieved by molecular-level hybridization remains essential but challenging for the further development of high-performance PEM fuel cells. In this work, by precisely hybridizing nano-scaled bismuth oxide clusters into Nafion, we have fabricated the high-performance hybrid membrane, Nafion-Bi₁₂ -3 %, which showed a proton conductivity of 386 mS cm^-1 at 80 °C in aqueous solution with low methanol permeability, and conserved the ideal mechanical and chemical stabilities as PEMs. Moreover, molecular dynamics (MD) simulation was employed to clarify the structural properties and the assembly mechanisms of the hybrid membrane on the molecular level. The maximum current density and power density of Nafion-Bi₁₂ -3 % for direct methanol fuel cells reached to 432.7 mA cm^-2 and 110.2 mW cm^-2 , respectively. This work provides new insights into the design of versatile functional polymer electrolyte membranes through polyoxometalate hybridization.

Tuning proton conductivity and energy barriers for proton transfer

Proton transport is critical for many technologies and for a variety of biochemical and biophysical processes. Proton transfer between molecules (via structural diffusion) is considered to be an efficient mechanism in highly proton conducting materials. Yet, the mechanism and what controls energy barriers for this process remain poorly understood. It was shown that mixing phosphoric acid (PA) with lidocaine leads to an increase in proton conductivity at the same liquid viscosity. However, recent simulations of mixtures of PA with various bases, including lidocaine, suggested no decrease in the proton transfer energy barrier. To elucidate this surprising result, we have performed broadband dielectric spectroscopy to verify the predictions of the simulations for mixtures of PA with several bases. Our results reveal that adding bases to PA increases the energy barriers for proton transfer, and the observed increase in proton conductivity at a similar viscosity appears to be related to the increase in the glass transition temperature (T_g) of the mixture. Moreover, the energy barrier seems to increase with T_g of the mixtures, emphasizing the importance of molecular mobility or interactions in the proton transfer mechanism.

rGO–diaminobutane surfaces with optimized N doping and hydrodynamics as dual proton–electron conductors and carbon photocatalysts

A reduced graphene oxide–diaminobutane (rGO–DAB) organic hybrid revealed excellent N doping, flexible interlayer distance, and light-harvesting property to support optimized photocatalytic activity for water splitting and dye degradation.

Diffusion of protons and sodium ions in silicophosphate glasses: insight based on first-principles molecular dynamic simulations

We propose a microscopic diffusion mechanism of protons and Na+ ions in phosphate glasses using first-principles molecular dynamic simulations. Protons hop and are chemisorbed onto non-bridging oxygen (NBO) of nearby PO4 tetrahedra through hydrogen bonds. The subsequent behavior depends on the morphology of the PO4 tetrahedra (QnP values). When a proton is adsorbed onto the NBO of a Q3P unit, it is desorbed on a short time scale of within 10 fs and re-adsorbed onto the NBO that was previously adsorbed. However, when a proton is adsorbed onto the NBO of a Q2P unit, another proton coordinated before adsorption is desorbed in a chain, resulting in the diffusion of protons. When a Na+ ion is present in the vicinity, the adsorption of a proton onto a Q2P unit leads to a decrease in the electrostatic interaction between Na+ and O- ions and induces the diffusion of Na+ ions. We conclude that the difference in the morphology of PO4 tetrahedra greatly affects the diffusion of protons and Na+ ions.

Insights into the hydrogen bond network topology of phosphoric acid and water systems

Phosphoric acid and its mixtures with water are some of the best proton conducting materials known to science. Although the proton conductivity in pure phosphoric acid decreases upon external doping with excess H+ or OH-, the addition of water improves it substantially. A number of experimental and theoretical studies indicate that these systems form a very special case of hydrogen bond networks which not only facilitate fast proton transport but also show a number of other interesting properties such as glass forming ability. In this work, we present the molecular dynamics simulation results of the H3PO4-H2O system over the entire concentration range. The hydrogen bond networks were analyzed in terms of conventional microscopic as well as topological properties based on graph and network theory. The results show that the hydrogen bond network of H3PO4 is fundamentally different from that of H2O. On average, each phosphoric acid molecule tends to form more and stronger hydrogen bonds than water which leads to a much more connected and clustered network showing small-world properties which are absent in pure water. Moreover, these hydrogen bond network properties persist in the H3PO4-H2O mixtures as well, even at relatively high water contents. Finally, many of the physical properties such as molecular diffusion coefficients seem to be also intimately related to the network topological properties and follow similar trends with respect to system content. These results strongly indicate that many important properties such as proton transport in phosphoric acid and its aqueous systems are fundamentally related to their hydrogen bond network topology and might hold the key for their ultimate molecular understanding.