Anchoring zero valence single atoms of nickel and iron on graphdiyne for hydrogen evolution

Enhanced uranium extraction from seawater: from the viewpoint of kinetics and thermodynamics

Uranium extraction from seawater (UES) is recognized as one of the seven pivotal chemical separations with the potential to revolutionize global paradigms. The forthcoming decade is anticipated to witness a surge in UES, driven by escalating energy demands. The oceanic reservoirs, possessing uranium quantities approximately 1000-fold higher than terrestrial mines, present a more sustainable and environmentally benign alternative. Empirical evidence from historical research indicates that adsorption emerges as the most efficacious process for uranium recovery from seawater, considering operational feasibility, cost-effectiveness, and selectivity. Over the years, scientific exploration has led to the development of a plethora of adsorbents with superior adsorption capacity. It would be efficient to design materials with a deep understanding of the adsorption from the perspective of kinetics and thermodynamics. Here, we summarize recent advancements in UES technology and the contemporary challenges encountered in this domain. Furthermore, we present our perspectives on the future trajectory of UES and finally offer our insights into this subject.

RuOx Quantum Dots Loaded on Graphdiyne for High-Performance Lithium-Sulfur Batteries

Here, a strategy to strengthen d-p orbital hybridization by fabricating π backbonding in the catalyst for efficient lithium polysulfides (LiPSs) conversion is reported. A special interface structure of RuOx quantum dots (QDs) anchored on graphdiyne (GDY) nanoboxes (RuOx QDs/GDY) is prepared to enable strong Ru-to-alkyne π backdonation, which effectively regulates the d-electron structures of Ru centers to promote the d-p orbital hybridization between the catalyst and LiPSs and significantly boosts the catalytic performance of RuOx QDs/GDY. The strong affinity with Li ions and fast Li-ion diffusion of RuOx QDs/GDY also enable ultrastable Li metal anodes. Thus, S@RuOx QDs/GDY cathodes exhibit excellent cycling performance under harsh conditions, and Li@RuOx QDs/GDY anodes show an ultralong cycling life over 8800 h without Li dendrite growth. Lithium-sulfur (Li-S) full cells with S@RuOx QDs/GDY cathodes and Li@RuOx QDs/GDY anodes can deliver an impressive areal capacity of 17.8 mA h cm-2 and good cycling stability under the practical conditions of low negative-to-positive electrode capacity (N/P) ratio (N/P = 1.4), lean electrolyte (E/S = 3 µL mg-1 ), and high S mass loading (15.4 mg cm-2 ).

Controllable Assembly of Highly Oxidized Cobalt on Graphdiyne Surface for Efficient Conversion of Nitrogen into Nitric Acid

The manufacture of nitric acid (HNO3 ) consumes large amounts of energy and causes serious environmental pollution. Electrochemical synthesis is regarded as a key way to eliminate carbon emissions from the chemicals industry. The selective electrosynthesis of HNO3 from nitrogen was achieved by controllable assembly of cobalt metal on graphdiyne surface using a powerful tool of electrochemistry at ambient conditions. As an advanced material, graphdiyne (GDY) has a large conjugated structure on its surface and is rich in sp-C triple bond skeleton, which can achieve strong interaction with metal atoms, resulting in incomplete charge transfer between graphdiyne and cobalt atoms. The experimental and theoretical calculation results show that the highly oxidized cobalt on graphdiyne (HOCo/GDY) can selectively and efficiently activate and convert the nitrogen into the key intermediate *NO, which promotes the efficient overall conversion performance of nitrogen to nitric acid. Thus, the highest nitric acid yield (192.0 μg h-1  mg-1 ) and Faradaic efficiency (21.5 %) were achieved at low potentials.

Strong d-π Orbital Coupling of Co-C4 Atomic Sites on Graphdiyne Boosts Potassium-Sulfur Battery Electrocatalysis

Potassium-sulfur (K-S) batteries are severely limited by the sluggish kinetics of the solid-phase conversion of K2S3/K2S2 to K2S, the rate-determining and performance-governing step, which urgently requires a cathode with facilitated sulfur accommodation and improved catalytic efficiency. To this end, we leverage the orbital-coupling approach and herein report a strong d-π coupling catalytic configuration of single-atom Co anchored between two alkynyls of graphdiyne (Co-GDY). The d-π orbital coupling of the Co-C4 moiety fully redistributes electrons two-dimensionally across the GDY, and as a result, drastically accelerates the solid-phase K2S3/K2S2 to K2S conversion and enhances the adsorption of sulfur species. Applied as the cathode, the S/Co-GDY delivered a record-high rate performance of 496.0 mAh g-1 at 5 A g-1 in K-S batteries. In situ and ex situ characterizations coupling density functional theory (DFT) calculations rationalize how the strong d-π orbital coupling of Co-C4 configuration promotes the reversible solid-state transformation kinetics of potassium polysulfide for high-performance K-S batteries.

Exploring the Fate of Copper Ions in the Synthesis of Graphdiyne

Copper is a crucial catalyst in the synthesis of graphdiyne (GDY). However, as catalysts, the final fate of the copper ions has hardly been concerned, which are usually treated as impurities. Here, it is observed that after simple washing with water and ethanol, GDY still contains a certain amount of copper ions, and demonstrated that the copper ions are adsorbed at the atomic layers of GDY. Furthermore, we transformed in situ the copper ions into ultrathin Cu nanocrystals, and the obtained Cu/GDY hybrids can be generally converted into a series of metal/GDY hybrid materials, such as Ag/GDY, Au/GDY, Pt/GDY, Pd/GDY, and Rh/GDY. The Cu/GDY hybrids exhibit extraordinary surface enhanced Raman scattering effect and can be applied in pollutant efficient enrichment and detection.

Electroless Deposition of Palladium Nanoparticles on Graphdiyne Boosts Electrochemiluminescence

Modulating the electronic structure of metal nanoparticles via metal-support interaction has attracted intense interest in the field of catalytic science. However, the roles of supporting substrates in regulating the catalytic properties of electrochemiluminescence (ECL) remain elusive. Here, we find that the use of graphdiyne (GDY) as the substrate for electroless deposition of Pd nanoparticles (Pd/GDY) produces the most pronounced anodic signal enhancement in luminol-dissolved oxygen (O2) ECL system as co-reactant accelerator over other carbon-based Pd composite nanomaterials. Pd/GDY exhibits electrocatalytic activity for the reduction of O2 through a four-electron pathway at approximately -0.059 V (vs Ag/AgCl) in neutral solution forming reactive oxygen species (ROS) as intermediates. The study shows that the interaction of Pd and GDY increases the amount and stability of ROS on the Pd/GDY electrode surface and promotes the reaction of ROS and luminol anion radical to generate excited luminol, which significantly boosts the luminol anodic ECL emission. Based on quenching of luminol ECL through the consumption of ROS by antioxidants, we develop a platform for the detection of intracellular antioxidants. This study provides an avenue for the development of efficient luminol ECL systems in neutral media and expands the biological application of ECL systems.

Copper Single-Atom Catalysts-A Rising Star for Energy Conversion and Environmental Purification: Synthesis, Modification, and Advanced Applications

Future renewable energy supply and green, sustainable environmental development rely on various types of catalytic reactions. Copper single-atom catalysts (Cu SACs) are attractive due to their distinctive electronic structure (3d orbitals are not filled with valence electrons), high atomic utilization, and excellent catalytic performance and selectivity. Despite numerous optimization studies are conducted on Cu SACs in terms of energy conversion and environmental purification, the coupling among Cu atoms-support interactions, active sites, and catalytic performance remains unclear, and a systematic review of Cu SACs is lacking. To this end, this work summarizes the recent advances of Cu SACs. The synthesis strategies of Cu SACs, metal-support interactions between Cu single atoms and different supports, modification methods including modification for carriers, coordination environment regulating, site distance effect utilizing, and dual metal active center catalysts constructing, as well as their applications in energy conversion and environmental purification are emphatically introduced. Finally, the opportunities and challenges for the future Cu SACs development are discussed. This review aims to provide insight into Cu SACs and a reference for their optimal design and wide application.

Emerging Xene-Based Single-Atom Catalysts: Theory, Synthesis, and Catalytic Applications

In recent years, the emergence of novel 2D monoelemental materials (Xenes), e.g., graphdiyne, borophene, phosphorene, antimonene, bismuthene, and stanene, has exhibited unprecedented potentials for their versatile applications as well as addressing new discoveries in fundamental science. Owing to their unique physicochemical, optical, and electronic properties, emerging Xenes have been regarded as promising candidates in the community of single-atom catalysts (SACs) as single-atom active sites or support matrixes for significant improvement in intrinsic activity and selectivity. In order to comprehensively understand the relationships between the structure and property of Xene-based SACs, this review represents a comprehensive summary from theoretical predictions to experimental investigations. Firstly, theoretical calculations regarding both the anchoring of Xene-based single-atom active sites on versatile support matrixes and doping/substituting heteroatoms at Xene-based support matrixes are briefly summarized. Secondly, controlled synthesis and precise characterization are presented for Xene-based SACs. Finally, current challenges and future opportunities for the development of Xene-based SACs are highlighted.

Precise Preparation of Triarylboron-Based Graphdiyne Analogues for Gas Separation

A series of triarylboron-based graphdiyne analogues (TAB-GDYs) with tunable pore size were prepared through copper mediated coupling reaction. The elemental composition, chemical bond, morphology of TAB-GDYs were well characterized. The crystallinity was confirmed by selected area electron diffraction (SAED) and stacking modes were studied in combination with high resolution transmission electron microscope (HRTEM) and structure simulation. The absorption and desorption isotherm revealed relatively high specific surface area of these TAB-GDYs up to 788 m2  g-1 for TMTAB-GDY, which decreased as pore size enlarged. TAB-GDYs exhibit certain selectivity for CO2 /N2 (21.9), CO2 /CH4 (5.3), CO2 /H2 (41.8) and C2 H2 /CO2 (2.3). This work has developed a series of boron containing two-dimensional frameworks with clear structures and good stability, and their tunable pore sizes have laid the foundation for future applications in the gas separation field.

Review on Bubble Dynamics in Proton Exchange Membrane Water Electrolysis: Towards Optimal Green Hydrogen Yield

Water electrolysis using a proton exchange membrane (PEM) holds substantial promise to produce green hydrogen with zero carbon discharge. Although various techniques are available to produce hydrogen gas, the water electrolysis process tends to be more cost-effective with greater advantages for energy storage devices. However, one of the challenges associated with PEM water electrolysis is the accumulation of gas bubbles, which can impair cell performance and result in lower hydrogen output. Achieving an in-depth knowledge of bubble dynamics during electrolysis is essential for optimal cell performance. This review paper discusses bubble behaviors, measuring techniques, and other aspects of bubble dynamics in PEM water electrolysis. It also examines bubble behavior under different operating conditions, as well as the system geometry. The current review paper will further improve the understanding of bubble dynamics in PEM water electrolysis, facilitating more competent, inexpensive, and feasible green hydrogen production.

Single and double transition metal atoms doped graphdiyne for highly efficient electrocatalytic reduction of nitric oxide to ammonia

The electrocatalytic conversion of nitric oxide (NORR) to ammonia (NH3) represents a pivotal approach for sustainable energy transformation and efficient waste utilization. Designing highly effective catalysts to facilitate the conversion of NO into NH3 remains a formidable challenge. In this work, the density functional theory (DFT) is used to design NORR catalysts based on single and double transition metal (TM:Fe, Co, Ni and Cu) atoms supported by graphdiyne (TM@GDY). Among eight catalysts, the Cu2@GDY is selected as a the most stable NORR catalyst with high NH3 activity and selectivity. A pivotal discovery underscores that the NORR mechanism is thermodynamically constrained on single atom catalysts (SACs), while being governed by electrochemical processes on double atom catalysts (DACs), a distinction arising from the different d-band centers of these catalysts. Therefore, this work not only introduces an efficient NORR catalyst but also provides crucial insights into the fundamental parameters influencing NORR performance.

Design of Efficient Oxygen Reduction Reaction Catalysts with Single Transition Metal Atom on N-Doped Graphdiyne

The revelation of the underlying structure-property relationship of single-atom catalysts (SACs) is a fundamental issue in the oxygen reduction reaction (ORR). Here we present systematic theoretical and experimental investigations of various N-doped graphdiyne (NGDY) supported transition metals (TMs) to shed light on this relationship. Calculation results indicate that the TMs' comprehensive activities follow the order of Pd@NGDY > Ni@NGDY > Co@NGDY > Fe@NGDY, which fits well with our experimental conclusion. Moreover, detailed structure-property relationship (194 in total) analysis suggests that the key-species binding stability (ΔG*OH), the d-orbital center (εd/εd-a) and charge transfer (ΔQTM/ΔQTM-a) of the active metal before/after reactants adsorption and the bond length of TM-O (LTM-O) as descriptors can well reflect the intermediate binding stability or ORR activity on different TM-SACs. Specifically, the change trend of catalytic activity is opposite to that of intermediate binding stability, meaning that too strongly bonded *OOH, *O, and *OH intermediates are unfavorable for ORR.

Decorating Mg12O12 Nanocage with Late First-Row Transition Metals To Act as Single-Atom Catalysts for the Hydrogen Evolution Reaction

In the pursuit of sustainable clean energy sources, the hydrogen evolution reaction (HER) has attained significant interest from the scientific community. Single-atom catalysts (SACs) are among the most promising candidates for future electrocatalysis because they possess high thermal stability, effective electrical conductivity, and excellent percentage atom utilization. In the present study, the applicability of late first-row transition metals (Fe-Zn) decorated on the magnesium oxide nanocage (TM@Mg12O12) as SACs for the HER has been studied, via density functional theory. The late first-row transition metals have been chosen as they have high abundance and are relatively low-cost. Among the studied systems, results show that the Fe@Mg12O12 SAC is the best candidate for catalyzing the HER reaction as it exhibits the lowest activation barrier for HER. Moreover, Fe@Mg12O12 shows high stability (Eint = -1.64 eV), which is essential in designing SACs to prevent aggregation of the metal. Furthermore, the results of the electronic properties' analysis showed that the HOMO-LUMO gap of the nanocage is decreased significantly upon doping of Fe (from 4.81 to 2.28 eV), indicating an increase in the conductivity of the system. This study highlights the potential application of the TM@nanocage SAC systems as effective HER catalysts.

Highly Selective Electrocatalytic Olefin Hydrogenation in Aqueous Solution

Selective hydrogenation of olefins with water as the hydrogen source at ambient conditions is still a big challenge in the field of catalysis. Herein, the electrocatalytic hydrogenation of purely aliphatic and functionalized olefins was achieved by using graphdiyne based copper oxide quantum dots (Cux O/GDY) as cathodic electrodes and water as the hydrogen source, with high activity and selectivity in aqueous solution at high current density under ambient temperature and pressure. In particular, the sp-/sp2 -hybridized graphdiyne catalyst allows the selective hydrogenation of cis-trans isomeric olefins. The chemical and electronic structure of the GDY results in the incomplete charge transfer between GDY and Cu atoms to optimize the adsorption/desorption of the reaction intermediates and results in high reaction selectivity and activity for hydrogenation reactions.

Regulating Efficient and Selective Single-atom Catalysts for Electrocatalytic CO2 Reduction

Anchoring transition metal (TM) atoms on suitable substrates to form single-atom catalysts (SACs) is a novel approach to constructing electrocatalysts. Graphdiyne with sp-sp2 hybridized carbon atoms and uniformly distributed pores have been considered as a potential carbon material for supporting metal atoms in a variety of catalytic processes. Herein, density functional theory (DFT) calculations were performed to study the single TM atom anchoring on graphdiyne (TM1 -GDY, TM=Sc, Ti, V, Cr, Mn, Co and Cu) as the catalysts for CO2 reduction. After anchoring metal atoms on GDY, the catalytic activity of TM1 -GDY (TM=Mn, Co and Cu) for CO2 reduction reaction (CO2 RR) are significantly improved comparing with the pristine GDY. Among the studied TM1 -GDY, Cu1 -GDY shows excellent electrocatalytic activity for CO2 reduction for which the product is HCOOH and the limiting potential (UL ) is -0.16 V. Mn1 -GDY and Co1 -GDY exhibit superior catalytic selectivity for CO2 reduction to CH4 with UL of -0.62 and -0.34 V, respectively. The hydrogen evolution reaction (HER) by TM1 -GDY (TM=Mn, Co and Cu) occurs on carbon atoms, while the active sites of CO2 RR are the transition metal atoms . The present work is expected to provide a solid theoretical basis for CO2 conversion into valuable hydrocarbons.

Defect Rich Structure Activated 3D Palladium Catalyst for Methanol Oxidation Reaction

Controlling the structure and properties of catalysts through atomic arrangement is the source of producing a new generation of advanced catalysts. A highly active and stable catalyst in catalytic reactions strongly depends on an ideal arrangement structure of metal atoms. We demonstrated that the introduction of the defect-rich structures, low coordination number (CN), and tensile strain in three-dimensional (3D) urchin-like palladium nanoparticles through chlorine bonded with sp-C in graphdiyne (Pd-UNs/Cl-GDY) can regulate the arrangement of metal atoms in the palladium nanoparticles to form a special structure. In situ Fourier infrared spectroscopy (FTIR) and theoretical calculation results show that Pd-UNs/Cl-GDY catalyst is beneficial to the oxidation and removal of CO intermediates. The Pd-UNs/Cl-GDY for methanol oxidation reaction (MOR) that display high current density (363.6 mA cm-2 ) and mass activity (3.6 A mgPd -1 ), 12.0 and 10.9 times higher than Pd nanoparticles, respectively. The Pd-UNs/Cl-GDY catalyst also exhibited robust stability with still retained 95 % activity after 2000 cycles. A defects libraries of the face-centered cubic and hexagonal close-packed crystal catalysts (FH-NPs) were synthesized by introducing chlorine in graphdiyne. Such defect-rich structures, low CN, and tensile strain tailoring methods have opened up a new way for the catalytic reaction of MOR.

2D Materials Beyond Post-AI Era: Smart Fibers, Soft Robotics, and Single Atom Catalysts

Recent consecutive discoveries of various 2D materials have triggered significant scientific and technological interests owing to their exceptional material properties, originally stemming from 2D confined geometry. Ever-expanding library of 2D materials can provide ideal solutions to critical challenges facing in current technological trend of the fourth industrial revolution. Moreover, chemical modification of 2D materials to customize their physical/chemical properties can satisfy the broad spectrum of different specific requirements across diverse application areas. This review focuses on three particular emerging application areas of 2D materials: smart fibers, soft robotics, and single atom catalysts (SACs), which hold immense potentials for academic and technological advancements in the post-artificial intelligence (AI) era. Smart fibers showcase unconventional functionalities including healthcare/environmental monitoring, energy storage/harvesting, and antipathogenic protection in the forms of wearable fibers and textiles. Soft robotics aligns with future trend to overcome longstanding limitations of hard-material based mechanics by introducing soft actuators and sensors. SACs are widely useful in energy storage/conversion and environmental management, principally contributing to low carbon footprint for sustainable post-AI era. Significance and unique values of 2D materials in these emerging applications are highlighted, where the research group has devoted research efforts for more than a decade.

Rapid Ozone Decomposition over Water-activated Monolithic MoO3 /Graphdiyne Nanowalls under High Humidity

Catalytic ozone (O3 ) decomposition at high relative humidity (RH) remains a great challenge due to the catalysts poison and deactivation under high humidity. Here, we firstly elaborate the role of water activation and the corresponding mechanism of the promoted O3 decomposition over the three-dimensional monolithic molybdenum oxide/graphdiyne (MoO3 /GDY) catalyst. The O3 decomposition over MoO3 /GDY reaches up to 100 % under high humid condition (75 % RH) at room temperature, which is 4.0 times as high as that of dry conditions, significantly surpasses other carbon-based MoO3 materials(≤7.1 %). The sp-hybridized carbon in GDY donates electrons to MoO3 along the C-O-Mo bond, facilitating water activation to form hydroxyl species. As a result, hydroxyl species dissociated from water act as new active sites, promoting the adsorption of O3 and the generation of new intermediate species (hydroxyl ⋅OH and superoxo ⋅O2 - ), which significantly lowers the energy barriers of O3 decomposition (0.57 eV lower than dry conditions).

Toward Edge Engineering of Two-Dimensional Layered Transition-Metal Dichalcogenides by Chemical Vapor Deposition

The manipulation of edge configurations and structures in atomically-thin transition metal dichalcogenides (TMDs) for versatile functionalization has attracted intensive interest in recent years. The chemical vapor deposition (CVD) approach has shown promise for TMD edge engineering of atomic edge configurations (1H, 1T or 1T'-zigzag or armchair edges) as well as diverse edge morphologies (1D nanoribbons, 2D dendrites, 3D spirals, etc.). These edge-rich TMD layers offer versatile candidates for probing the physical and chemical properties and exploring potential applications in electronics, optoelectronics, catalysis, sensing, and quantum technologies. In this Review, we present an overview of the current state-of-the-art in the manipulation of TMD atomic edges and edge-rich structures using CVD. We highlight the vast range of distinct properties associated with these edge configurations and structures and provide insights into the opportunities afforded by such edge-functionalized crystals. The objective of this Review is to motivate further research and development efforts to use CVD as a scalable approach to harness the benefits of such crystal-edge engineering.

Single-Atom Anchored Curved Carbon Surface for Efficient CO2 Electro-Reduction with Nearly 100% CO Selectivity and Industrially-Relevant Current Density

Although single metal atoms on porous carbons (PCs) are widely used in electrochemical CO2 reduction reaction, these systems have long relied on flat graphene-based models, which are far beyond reality because of abundant curved structures in PCs; the effect of curved surfaces has long been ignored. In addition, the selectivity generally decreases under high current density, which severely limits practical application. Herein, theoretical calculations reveal that a single-Ni-atom on a curved surface can simultaneously enhance the total density of states around Fermi level and decrease the energy barrier for *COOH formation, thereby enhancing catalytic activity. This work reports a rational molten salt approach for preparing PCs with ultra-high specific surface area of up to 2635 m2 g-1 . As determined by cutting-edge techniques, a single Ni atom on a curved carbon surface is obtained and used as a catalyst for electrochemical CO2 reduction. The CO selectivity reaches up to 99.8% under industrial-level current density of 400 mA cm-2 , outperforming state-of-the-art PC-based catalysts. This work not only offers a new method for the rational synthesis of single atom catalysts with strained geometry to host rich active sites, but also provides in-depth insights for the origin of catalytic activity of curved structure-enriched PC-based catalysts.

State, synthesis, perspective applications, and challenges of Graphdiyne and its analogues: A review of recent research

Carbon materials technology provides the possibility of synthesizing low-cost, outstanding performance replacements to noble-metal catalysts for long-term use. Graphdiyne (GDY) is a carbon allotrope with an extremely thin atomic thickness. It consists of carbon elements, that are hybridized with both sp. and sp2, resulting in a multilayered two-dimensional (2D) configuration. Several functional models suggest, that GDY contains spontaneously existing band structure with Dirac poles. This is due to the non-uniform interaction among carbon atoms, which results from various fusions and overlapping of the 2pz subshell. Unlike other carbon allotropes, GDY has Dirac cone arrangements, that in turn give it inimitable physiochemical characteristics. These properties include an adjustable intrinsic energy gap, high speeds charging transport modulation efficiency, and exceptional conductance. Many scientists are interested in such novel, linear, stacked materials, including GDY. As a result, organized synthesis of GDY has been pursued, making it one of the first synthesized GDY materials. There are several methods to manipulate the band structure of GDY, including applying stresses, introducing boron/nitrogen loading, utilizing nanowires, and hydrogenations. The flexibility of GDY can be effectively demonstrated through the formation of nano walls, nanostructures, nanotube patterns, nanorods, or structured striped clusters. GDY, being a carbon material, has a wide range of applications owing to its remarkable structural and electrical characteristics. According to subsequent research, the GDY can be utilized in numerous energy generation processes, such as electrochemical water splitting (ECWS), photoelectrochemical water splitting (PEC WS), nitrogen reduction reaction (NRR), overall water splitting (OWS), oxygen reduction reaction (ORR), energy storage materials, lithium-Ion batteries (LiBs) and solar cell applications. These studies suggested that the use of GDY holds significant potential for the development and implementation of efficient, multimodal, and intelligent catalysts with realistic applications. However, the limitation of GDY and GDY-based composites for forthcoming studies are similarly acknowledged. The objective of these studies is to deliver a comprehensive knowledge of GDY and inspire further advancement and utilization of these unique carbon materials.

Nb2S2C Monolayers with Transition Metal Atoms Embedded at the S Vacancy Are Promising Single-Atom Catalysts for CO Oxidation

Single atoms anchored on stable and robust two-dimensional (2D) materials are attractive catalysts for carbon monoxide (CO) oxidation. Here, 3d (Fe-Zn), 4d (Ru-Cd), and 5d (Os-Hg) transition metal-decorated Nb2S2C monolayers were systematically studied as potential single-atom catalysts for low-temperature CO oxidation reactions by performing first-principles calculations. Sulfur vacancies are essential for stabilizing the transition metals anchored on the surface of defective Nb2S2C. After estimating the structure stability, the aggregation trend of the embedded metal atoms, and adsorption strength of reactants and products, Zn-decorated defective Nb2S2C is predicted to be a promising catalyst to facilitate CO oxidation through the Langmuir-Hinshelwood (LH) mechanism with an energy barrier of only 0.25 eV. Our investigation indicates that defective carbosulfides can be promising substrates to generate efficient and low-cost single-atom catalysts for low-temperature CO oxidation.

Fe-Ni Diatomic Sites Coupled with Pt Clusters to Boost Methanol Electrooxidation via Free Radical Relaying

Pt-based catalysts for direct methanol fuel cells (DMFCs) are still confronted with the challenge of over-oxidation of Pt and poisoning effect of intermediates; therefore, a spatial relay strategy was adopted to overcome these issues. Herein, Pt clusters were creatively fixed on the N-doped carbon matrix with rich Fe-Ni diatoms, which can provide independent reaction sites for methanol oxidation reaction (MOR) and enhance the catalytic activity due to the electronic regulation effect between Pt cluster and atomic-level metal sites. The optimized Pt/FeNi-NC catalyst shows MOR electrocatalytic activity of 2.816 A mgPt -1 , 2.6 times that of Pt/C (1.115 A mgPt -1 ). Experiments combined with DFT study reveal that Fe-Ni diatoms and Pt clusters take charge of hydroxyl radical (⋅OH) generation and methanol activation, respectively. The free radical relaying of ⋅OH could prevent the over-oxidation of Pt. Meanwhile, ⋅OH from Fe-Ni sites accelerates the elimination of intermediates, thus improving the durability of catalysts.

Synergistic Coupling of Charge Extraction and Sinking in Cu5FeS4/Ni3S2@NF for Photoassisted Electrocatalytic Oxygen Evolution

Exploring low-cost and high-performance oxygen evolution reaction (OER) catalysts has attracted great attention due to their crucial role in water splitting. Here, a bifunctional Cu5FeS4/Ni3S2@NF catalyst was in situ formed on a nickel (Ni) foam toward efficient photoassisted electrocatalytic (P-EC) OER, which displays an ultralow overpotential of 260 mV at 30 mA cm-2 in alkaline solution, outperforming most previously reported Ni-based catalysts. It also shows great potential in degradation of antibiotics as an alternative anode reaction to OER owing to the prompt transfer of photogenerated holes. The photocurrent test and transient photovoltage spectroscopy indicate that the synergistic coupling of charge extraction and sinking effects in Cu5FeS4 and Ni3S2 is critical for boosting the OER activity via photoassistance. Electrochemical active surface area and electrochemical impedance spectroscopy tests further prove that the photogenerated electromotive force can effectively compensate the overpotential of OER. This work not only provides a good guidance for integrating photocatalysis and electrocatalysis, but also indicates the key role of synergistic extraction and utilization of photogenerated charge carriers in P-EC.

Graphdiyne-Based Multiscale Catalysts for Ammonia Synthesis

Graphdiyne, a sp/sp2 -cohybridized two-dimensional all- carbon material, has many unique and fascinating properties of alkyne-rich structures, large π conjugated system, uniform pores, specific unevenly-distributed surface charge, and incomplete charge transfer properties provide promising potential in practical applications including catalysis, energy conversion and storage, intelligent devices, life science, photoelectric, etc. These superior advantages have made graphdiyne one of the hottest research frontiers of chemistry and materials science and produced a series of original and innovative research results in the fundamental and applied research of carbon materials. In recent years, considerable advances have been made toward the development of graphdiyne-based multiscale catalysts for nitrogen fixation and ammonia synthesis at room temperatures and ambient pressures. This review aims to provide a comprehensive update in regard to the synthesis of graphdiyne-based multiscale catalysts and their applications in the synthesis of ammonia. The unique features of graphdiyne are highlighted throughout the review. Finally, it concludes with the discussion of challenges and future perspectives relating to graphdiyne.

Ir0/graphdiyne atomic interface for selective epoxidation

The development of catalysts that can selectively and efficiently promote the alkene epoxidation at ambient temperatures and pressures is an important promising path to renewable synthesis of various chemical products. Here we report a new type of zerovalent atom catalysts comprised of zerovalent Ir atoms highly dispersed and anchored on graphdiyne (Ir⁰/GDY) wherein the Ir⁰ is stabilized by the incomplete charge transfer effect and the confined effect of GDY natural cavity. The Ir⁰/GDY can selectively and efficiently produce styrene oxides (SO) by electro-oxidizing styrene (ST) in aqueous solutions at ambient temperatures and pressures with high conversion efficiency of ∼100%, high SO selectivity of 85.5%, and high Faradaic efficiency (FE) of 55%. Experimental and density functional theory (DFT) calculation results show that the intrinsic activity and stability due to the incomplete charge transfer between Ir⁰ and GDY effectively promoted the electron exchange between the catalyst and reactant molecule, and realized the selective epoxidation of ST to SO. Studies of the reaction mechanism demonstrate that Ir⁰/GDY proceeds a distinctive pathway for highly selective and active alkene-to-epoxide conversion from the traditional processes. This work presents a new example of constructing zerovalent metal atoms within the GDY matrix toward selective electrocatalytic epoxidation.

Two-Dimensional Carbon Graphdiyne: Advances in Fundamental and Application Research

Graphdiyne (GDY), a rising star of carbon allotropes, features a two-dimensional all-carbon network with the cohybridization of sp and sp² carbon atoms and represents a trend and research direction in the development of carbon materials. The sp/sp²-hybridized structure of GDY endows it with numerous advantages and advancements in controlled growth, assembly, and performance tuning, and many studies have shown that GDY has been a key material for innovation and development in the fields of catalysis, energy, photoelectric conversion, mode conversion and transformation of electronic devices, detectors, life sciences, etc. In the past ten years, the fundamental scientific issues related to GDY have been understood, showing differences from traditional carbon materials in controlled growth, chemical and physical properties and mechanisms, and attracting extensive attention from many scientists. GDY has gradually developed into one of the frontiers of chemistry and materials science, and has entered the rapid development period, producing large numbers of fundamental and applied research achievements in the fundamental and applied research of carbon materials. For the exploration of frontier scientific concepts and phenomena in carbon science research, there is great potential to promote progress in the fields of energy, catalysis, intelligent information, optoelectronics, and life sciences. In this review, the growth, self-assembly method, aggregation structure, chemical modification, and doping of GDY are shown, and the theoretical calculation and simulation and fundamental properties of GDY are also fully introduced. In particular, the applications of GDY and its formed aggregates in catalysis, energy storage, photoelectronic, biomedicine, environmental science, life science, detectors, and material separation are introduced.

Prospects of 2D graphdiynes and their applications in desalination and wastewater remediation

Water is an indispensable part of human life that affects health and food intake. Water pollution caused by rapid industrialization, agriculture, and other human activities affects humanity. Therefore, researchers are prudent and cautious regarding the use of novel materials and technologies for wastewater remediation. Graphdiyne (GDY), an emerging 2D nanomaterial, shows promise in this direction. Graphdiyne has a highly symmetrical π-conjugated structure consisting of uniformly distributed pores; hence, it is favorable for applications such as oil-water separation and organic-pollutant removal. The acetylenic linkage in GDY can strongly interact with metal ions, rendering GDY applicable to heavy-metal adsorption. In addition, GDY membranes that exhibit 100% salt rejection at certain pressures are potential candidates for wastewater treatment and water reuse via desalination. This review provides deep insights into the structure, properties, and synthesis methods of GDY, owing to which it is a unique, promising material. In the latter half of the article, various applications of GDY in desalination and wastewater treatment have been detailed. Finally, the prospects of these materials have been discussed succinctly.

Design, synthesis, and application of some two-dimensional materials

Two-dimensional (2D) materials are widely used as key components in the fields of energy conversion and storage, optoelectronics, catalysis, biomedicine, etc. To meet the practical needs, molecular structure design and aggregation process optimization have been systematically carried out. The intrinsic correlation between preparation methods and the characteristic properties is investigated. This review summarizes the recent research achievements of 2D materials in the aspect of molecular structure modification, aggregation regulation, characteristic properties, and device applications. The design strategies to fabricate functional 2D materials starting from precursor molecules are introduced in detail referring to organic synthetic chemistry and self-assembly technology. It provides important research ideas for the design and synthesis of related materials.

Scalable synthesis of soluble crystalline ionic-graphdiyne by controlled ion expansion

Graphdiyne (GDY) is a promising material possessing extensive electronic tunability, high π conjugacy, and ordered porosity at a molecular level for the sp/sp2-hybridized periodic structures. Despite these advantages, the preparation of soluble and crystalline graphdiyne is limited by the relatively compact stacking interactions, mostly existing in thick-layer and insoluble solids. Herein, we proposed a strategy of "framework charge-induced intercalation (FCII)" for the synthesis of a soluble (4.3 mg ml-1) and yet interlayer-expanded (∼0.6 Å) crystalline ionic graphdiyne, named as N+-GDY, through regulating the interlayer interactions. The skeleton of such a sample is positively charged, and then the negative ions migrate to the interlayer to expand the space, endowing the N+-GDY with solution processability. The crystal structure of N+-GDY is proved through analysis of HR-TEM images under different axes of observation and theoretical simulations. The resulting N+-GDY possesses high dispersity in organic solvents to produce a pure-solution phase which is conducive to the formation of oriented N+-GDY films, accompanied by exfoliation-nanosheet restacking. The film exhibits a conductivity of 0.014 S m-1, enabling its applications in electronic devices.

Hydrogen Radical-Induced Electrocatalytic N2 Reduction at a Low Potential

Realizing efficient hydrogenation of N₂ molecules in the electrocatalytic nitrogen reduction reaction (NRR) is crucial in achieving high activity at a low potential because it theoretically requires a higher equilibrium potential than other steps. Analogous to metal hydride complexes for N₂ reduction, achieving this step by chemical hydrogenation can weaken the potential dependence of the initial hydrogenation process. However, this strategy is rarely reported in the electrocatalytic NRR, and the catalytic mechanism remains ambiguous and lacks experimental evidence. Here, we show a highly efficient electrocatalyst (ruthenium single atoms anchored on graphdiyne/graphene sandwich structures) with a hydrogen radical-transferring mechanism, in which graphdiyne (GDY) generates hydrogen radicals (H^•), which can effectively activate N₂ to generate NNH radicals (^•NNH). A dual-active site is constructed to suppress competing hydrogen evolution, where hydrogen preferentially adsorbs on GDY and Ru single atoms serve as the adsorption site of ^•NNH to promote further hydrogenation of NH₃ synthesis. As a result, high activity and selectivity are obtained simultaneously at -0.1 V versus a reversible hydrogen electrode. Our findings illustrate a novel hydrogen transfer mechanism that can greatly reduce the potential and maintain the high activity and selectivity in NRR and provide powerful guidelines for the design concept of electrocatalysts.

Rapid fabrication of nanoporous iron by atmospheric plasma for efficient wastewater treatment

Nanoporous (NP) iron with large surface area is highly desired for wastewater degradation catalysis. However, it remains a challenge for the fabrication of NP-Fe because the conventional aqueous dealloying or liquid metal dealloying are not applicable. Herein, a novel and universal plasma-assisted electro-dealloying technique was utilized to fabricate NP-Fe. The NP-Fe demonstrates evenly distributed pore structure. The pore density can be tuned by the variation of the ratio of Fe and Zn in the precursor, and the average pore size can be tuned by the processing time. Owing to its large specific surface area, the NP-Fe shows excellent wastewater degradation performance, which is 26 times better than that of commercial zero-valent iron catalysts. This study provides a useful approach to fabricate NP active metals with enhanced catalytic performance.

Ultra-high-efficiency capture of lead ions over acetylenic bond-rich graphdiyne adsorbent in aqueous solution

A satisfactory material with high adsorption capacity is urgently needed to solve the serious problem of environment and human health caused by lead pollution. Herein, hydrogen-substituted graphdiyne (HsGDY) was successfully fabricated and employed to remove lead ions from sewage and lead-containing blood. The as-prepared HsGDY exhibits the highest adsorption capacity of lead among the reported materials with a maximum adsorption capacity of 2,390 mg/g, i.e., ~five times larger than that of graphdiyne (GDY). The distinguished hexagonal hole and stack mode of HsGDY allows the adsorption of more lead via its inner side adsorption mode in one single unit space. In addition, the Pb 6s and H 1s hybridization promotes the strong bonding of lead atom adsorbed at the acetylenic bond of HsGDY, contributing to the high adsorption capacity. HsGDY can be easily regenerated by acid treatment and showed excellent regeneration ability and reliability after six adsorption-regeneration cycles. Langmuir isotherm model, pseudo second order, and density functional theory (DFT) demonstrated that the lead adsorption process in HsGDY is monolayer chemisorption. Furthermore, the HsGDY-based portable filter can handle 1,000 μg/L lead-containing aqueous solution up to 1,000 mL, which is nearly 6.67 times that of commercial activated carbon particles. And, the HsGDY shows good biocompatibility and excellent removal efficiency to 100 μg/L blood lead, which is 1.7 times higher than that of GDY. These findings suggest that HsGDY could be a promising adsorbent for practical lead and other heavy metal removal.

Recent progress in neuromorphic and memory devices based on graphdiyne

Graphdiyne (GDY) is an emerging two-dimensional carbon allotrope featuring a direct bandgap and fascinating physical and chemical properties, and it has demonstrated its promising potential in applications of catalysis, energy conversion and storage, electrical/optoelectronic devices, etc. In particular, the recent breakthrough in the synthesis of large-area, high-quality and ultrathin GDY films provides a feasible approach to developing high-performance electrical devices based on GDY. Recently, various GDY-based electrical and optoelectronic devices including multibit optoelectronic memories, ultrafast nonvolatile memories, artificial synapses and memristors have been proposed, in which GDY plays a crucial role. It is essential to summarize the recent breakthrough of GDY in device applications as a guidance, especially considering that the existing GDY-related reviews mainly focus on the applications in catalysis and energy-related fields. Herein, we review GDY-based novel memory and neuromorphic devices and their applications in neuromorphic computing and artificial visual systems. This review will provide an insight into the design and preparation of GDY-based devices and broaden the application fields of GDY.

Synthesis of Graphdiyne Hollow Spheres and Multiwalled Nanotubes and Applications in Water Purification and Raman Sensing

Controlling the structure of graphdiyne (GDY) is crucial for the discovery of new properties and the development of new applications. Herein, the microemulsion synthesis of GDY hollow spheres (HSs) and multiwalled nanotubes composed of ultrathin nanosheets is reported for the first time. The formation of an oil-in-water (O/W) microemulsion is found to be a key factor controlling the growth of GDY. These GDY HSs have fully exposed surfaces because of the avoidance of overlapping between nanosheets, thereby showing an ultrahigh specific surface area of 1246 m² g^-1 and potential applications in the fields of water purification and Raman sensing.

Ambient Electrosynthesis toward Single-Atom Sites for Electrocatalytic Green Hydrogen Cycling

With the ultimate atomic utilization, well-defined configuration of active sites and unique electronic properties, catalysts with single-atom sites (SASs) exhibit appealing performance for electrocatalytic green hydrogen generation from water splitting and further utilization via hydrogen-oxygen fuel cells, such that a vast majority of synthetic strategies toward SAS-based catalysts (SASCs) are exploited. In particular, room-temperature electrosynthesis under atmospheric pressure offers a novel, safe, and effective route to access SASs. Herein, the recent progress in ambient electrosynthesis toward SASs for electrocatalytic sustainable hydrogen generation and utilization, and future opportunities are discussed. A systematic summary is started on three kinds of ambient electrochemically synthetic routes for SASs, including electrochemical etching (ECE), direct electrodeposition (DED), and electrochemical leaching-redeposition (ELR), associated with advanced characterization techniques. Next, their electrocatalytic applications for hydrogen energy conversion including hydrogen evolution reaction, oxygen evolution reaction, overall water splitting, and oxygen reduction reaction are reviewed. Finally, a brief conclusion and remarks on future challenges regarding further development of ambient electrosynthesis of high-performance and cost-effective SASCs for many other electrocatalytic applications are presented.

Ultrathin Graphdiyne Nanowires with Diameters below 3 nm: Synthesis, Photoelectric Effect, and Enhanced Raman Sensing

Due to the intrinsic layered structure, graphdiyne (GDY) strongly tends to form 2D materials, therefore, most of the current research are based on GDY 2D structures. Up to now, the synthesis of its ultrathin nanowires with a high aspect ratio has not been reported. Here, the ultrathin GDY nanowires with diameters below 3 nm are reported for the first time by a two-phase interface synthesis method, which has excellent crystallinity and an aspect ratio of more than 2500. Evidence shows that the GDY ultrathin nanowires are formed by the oriented-attachment mechanism of nanoparticles. The GDY ultrathin nanowires exhibit a significant quantum confinement effect, enhanced photoelectric effect, and promising applications in surface-enhanced Raman sensing.

Graphynes and Graphdiynes for Energy Storage and Catalytic Utilization: Theoretical Insights into Recent Advances

Carbon allotropes have contributed to all aspects of people's lives throughout human history. As emerging carbon-based low-dimensional materials, graphyne family members (GYF), represented by graphdiyne, have a wide range potential applications due to their superior physical and chemical properties. In particular, graphdiyne (GDY), as the leader of the graphyne family, has been practically applied to various research fields since it was first successfully synthesized. GYF have a large surface area, both sp and sp² hybridization, and a certain band gap, which was considered to originate from the overlap of carbon 2p_z orbitals and the inhomogeneous π-bonds of carbon atoms in different hybridization forms. These properties mean GYF-based materials still have many potential applications to be developed, especially in energy storage and catalytic utilization. Since most of the GYF have yet to be synthesized and applications of successfully synthesized GYF have not been developed for a long time, theoretical results in various application fields should be shared to experimentalists to attract more intentions. In this Review, we summarized and discussed the synthesis, structural properties, and applications of GYF-based materials from the theoretical insights, hoping to provide different viewpoints and comments.

Second Sphere Effects Promote Formic Acid Dehydrogenation by a Single-Atom Gold Catalyst Supported on Amino-Substituted Graphdiyne

Regulating the second sphere of homogeneous molecular catalysts is a common and effective method to boost their catalytic activities, while the second sphere effects have rarely been investigated for heterogeneous single-atom catalysts primarily due to the synthetic challenge for installing functional groups in their second spheres. Benefiting from the well-defined and readily tailorable structure of graphdiyne (GDY), an Au single-atom catalyst on amino-substituted GDY is constructed, where the amino group is located in the second sphere of the Au center. The Au atoms on amino-decorated GDY displayed superior activity for formic acid dehydrogenation compared with those on unfunctionalized GDY. The experimental studies, particularly the proton inventory studies, and theoretical calculations revealed that the amino groups adjacent to an Au atom could serve as proton relays and thus facilitate the protonation of an intermediate Au-H to generate H₂ . Our study paves the way to precisely constructing the functional second sphere on single-atom catalysts.

Graphdiyne oxide elicits a minor foreign-body response and generates quantum dots due to fast degradation

Graphdiyne (GDY) is a novel two-dimensional (2D) carbon allotrope that has attracted much attention in materials, physics, chemistry, and microelectronics for its excellent properties. Much effort has been devoted to exploring the biomedical applications of GDY in 2D carbon nanomaterials, especially for smart drugs and gene delivery. However, few studies have focused on the biocompatibility and potential environmental hazards of GDY and its derivatives. In this study, graphdiyne oxide (GDYO) and graphene oxide (GO) were obtained using different oxidation methods. Their cytotoxicity and hemolysis in vitro and biocompatibility in subcutaneous and peritoneal locations in vivo were compared. GDYO had very low biotoxicity in vitro and was moderately biocompatible in the muscle and abdominal cavity in vivo. Highly oxidized products and graphdiyne quantum dots (GDQDs) were observed in peritoneal cells. GDYO had better biocompatibility and its sheet size was easily diminished through oxidative degradation. Therefore, GDYO is a good candidate for use in 2D carbon nanomaterials in biomedicine.

Rational design of atomic site catalysts for electrochemical CO2 reduction

Renewable-energy-powered electrochemical CO₂ reduction (ECR) is a promising way of transforming CO₂ to value-added products and achieving sustainable carbon recycling. By virtue of the extremely high exposure rate of active sites and excellent catalytic performance, atomic site catalysts (ASCs), including single-atomic site catalysts and diatomic site catalysts, have attracted considerable attention. In this feature article, we focus on the rational design strategies of ASCs developed in recent years for the ECR reaction. The influence of these strategies on the activity and selectivity of ASCs for ECR is further discussed in terms of electronic regulation, synergistic activation, microenvironmental regulation and tandem catalytic system construction. Finally, the challenges and future directions are indicated. We hope that this feature article will be helpful in the development of novel ASCs for ECR.

Review on Electrocatalytic Coreduction of Carbon Dioxide and Nitrogenous Species for Urea Synthesis

The electrochemical coreduction of carbon dioxide (CO₂) and nitrogenous species (such as NO₃^-, NO₂^-, N₂, and NO) for urea synthesis under ambient conditions provides a promising solution to realize carbon/nitrogen neutrality and mitigate environmental pollution. Although an increasing number of studies have made some breakthroughs in electrochemical urea synthesis, the unsatisfactory Faradaic efficiency, low urea yield rate, and ambiguous C-N coupling reaction mechanisms remain the major obstacles to its large-scale applications. In this review, we present the recent progress on electrochemical urea synthesis based on CO₂ and nitrogenous species in aqueous solutions under ambient conditions, providing useful guidance and discussion on the rational design of metal nanocatalyst, the understanding of the C-N coupling reaction mechanism, and existing challenges and prospects for electrochemical urea synthesis. We hope that this review can stimulate more insights and inspiration toward the development of electrocatalytic urea synthesis technology.

Graphdiyne aerogel architecture via a modified Hiyama coupling reaction for gas adsorption

Carbon aerogels are special porous materials with low density and large specific surface area and have advanced applications. As a new type of carbon nanomaterials, graphdiynes (GDY) aerogel possess a highly π-conjugated structure, unique sp/sp²-hybridized linkages, and well-distributed intrinsic pores, which endow GDY aerogel with great potential applications. However, the fabrication of macroscopic GDY aerogel is still an ongoing challenge due to intrinsic synthetic difficulties. Here, a modified Hiyama coupling reaction was developed to synthesize GDY aerogel via in-situ deprotection of trimethylsilane groups and subsequent freeze-drying. The synthesized GDY aerogel has a low density of ∼12 mg cm^-3, a high specific surface area of ∼909 m² g^-1, and a porosity of ∼98%, which is superior to other GDY nanomaterials. The adsorption capacity of GDY aerogel toward H₂, CO₂, and CH₄ is investigated, and competitive adsorption abilities are obtained.

2D Phthalocyanine-Assembled Porous Nanostructure-Based Electrochemical Platform for High-Efficiency Detection of Ascorbic Acid

In this work, a novel two-dimensional (2D) porous nanostructure is constructed upon air/water interfacial assembly of 12-crown-ether-4-incorporated double-decker phthalocyanine (Pc2). The combination of the good electroconductivity of phthalocyanine and the great surface area of the porous structure endows the assembled film with excellent chemical sensing property for ascorbic acid (AA). The low limit of detection can be 0.15 μM with a large linear concentration range and strong anti-interfering ability, which can be comparable to the best results of tetrapyrrole-based electrochemical sensors for AA. Furthermore, the obtained 2D porous assembled film sensor can be applied in real-time monitoring of AA in commercial drinks, indicating its application potential in accurate detection of AA in real samples.

Gradient Graphdiyne Induced Copper and Oxygen Vacancies in Cu0.95 V2 O5 Anodes for Fast-Charging Lithium-Ion Batteries

Vacancies can significantly affect the performance of metal oxide materials. Here, a gradient graphdiyne (GDY) induced Cu/O-dual-vacancies abundant Cu_0.95 V₂ O₅ @GDY heterostructure material has been prepared as a competitive fast-charging anode material. Cu_0.95 V₂ O₅ self-catalyzes the growth of gradient GDY with rich alkyne-alkene complex in the inner layer and rich alkyne bonds in the outer layer, leading to the formation of Cu and O vacancies in Cu_0.95 V₂ O₅ . The synergistic effect of vacancies and gradient GDY results in the electron redistribution at the hetero-interface to drive the generation of a built-in electric field. Thus, the Li-ion transport kinetics, electrochemical reaction reversibility and Li storage sites of Cu_0.95 V₂ O₅ are greatly enhanced. The Cu_0.95 V₂ O₅ @GDY anodes show excellent fast-charging performance with high capacities and negligible capacity decay for 10 000 cycles and 20 000 cycles at extremely high current densities of 5 A g^-1 and 10 A g^-1 , respectively. Over 30 % of capacity can be delivered in 35 seconds.