Scalable preparation of alternating block copolymer particles with inverse bicontinuous mesophases

Block Copolymer Vesicles with Tunable Membrane Thicknesses and Compositions Prepared by Aqueous Seeded Photoinitiated Polymerization-Induced Self-Assembly at Room Temperature

Block copolymer vesicles with diverse functionalities and intrinsic hollow structures have received considerable attention due to their broad applications in biomedical fields, including drug delivery, bioimaging, theranostics, gene therapy, etc. However, efficient preparation of block copolymer vesicles with tunable membrane thicknesses and compositions under mild conditions is still a challenge. Herein, we report an aqueous seeded photoinitiated polymerization-induced self-assembly (photo-PISA) for the precise preparation of block copolymer vesicles at room temperature. By changing the total degree of polymerization (DP) of the hydrophobic block in seeded photo-PISA, one can easily tune the membrane thickness without compromising the morphology of vesicles. Moreover, by adding different comonomers such as hydrophobic monomers, hydrophilic monomers, and cross-linkers into seeded photo-PISA, vesicles with different compositions could be prepared without compromising the morphology and colloidal stability. Polymerization kinetics show that seeded photo-PISA can skip the step of in situ self-assembly with a short homogeneous polymerization stage being observed. To demonstrate potential biological applications, enzymatic nanoreactors were constructed by loading horseradish peroxidase (HRP) inside vesicles via seeded photo-PISA. The enzymatic properties of these nanoreactors could be easily regulated by changing the membrane thickness and hydrophobicity. It is expected that this method can provide a facile platform for the precise preparation of block copolymer vesicles that may find applications in different fields.

Block Copolymer Self-Assembly Guided Synthesis of Mesoporous Carbons with In-Plane Holey Pores for Efficient Oxygen Reduction Reaction

In this paper, we report a simple approach, using interfacial self-assembly of block copolymers (BCPs) on self-sacrificial templates, for preparing mesoporous carbons with in-plane holey pores, including nitrogen atom-doped carbon nanosheets and nanoflowers (denoted as NHCSs and NHCFs). The approach employed sheet- or flower-like layered double hydroxide as the templates, P123 copolymer as the pore-directing agent, and m-phenylenediamine as the carbon source. The holey mesopores may shorten the mass transfer distance to the internal active sites of stacked nanosheets, while the three-dimensional (3D) packing mode of nanosheets can reduce pore blockage caused by their tight stacking. Profiting from these structural advantages, acting as electrocatalysts for oxygen reduction reaction (ORR), both NHCSs and NHCFs show excellent catalytic performance better than that of carbon nanosheets without holey pores. Particularly, NHCFs exhibit a high half-wave-potential (0.82V) and a limiting current density (5.4 mA cm^-2 ), close to those of commercial Pt/C catalysts. This study provides valuable clues on building mesoporous materials with in-plane holey pores as well as on the effect of pore structure and stacking mode of 2D materials on their electrocatalytic ORR performance. This article is protected by copyright. All rights reserved.

Fluorine-containing nano-objects with the same compositions but different segment distributions: synthesis, characterization and comparison

PHOS-b-PPFS nano-objects and PPFS-b-PHOS nano-objects can be prepared by RAFT PISA and MISA processes, respectively. These nano-objects have the same compositions but different segment distributions and distinct hydrophilic/hydrophobic properties.

Photoluminescent polymer cubosomes prepared by RAFT-mediated polymerization-induced self-assembly

The preparation of photoluminescent polymer assemblies with a wide range of morphologies, including spongosomes and cubosomes, via an efficient RAFT-mediated polymerization-induced self-assembly (RAFT-PISA) process, was demonstrated.

Polymers with multiple functions: α,ω-macromolecular photoinitiators/chain transfer agents used in aqueous photoinitiated polymerization-induced self-assembly

A series of α,ω-functionalized polymers with a photoinitiator end group and a RAFT end group were synthesized and employed as macromolecular photoinitiators/chain transfer agents in aqueous photoinitiated polymerization-induced self-assembly.

Influence of Solvent on RAFT-mediated Polymerization of Benzyl Methacrylate (BzMA) and How to Overcome the Thermodynamic/Kinetic Limitation of Morphology Evolution during Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) has been demonstrated to be a powerful strategy to produce polymeric nano-objects of various morphologies. Dependent on the solubility of monomers, PISA is usually classified into two...

Organic–inorganic hybrid nanomaterials prepared via polymerization-induced self-assembly: recent developments and future opportunities

This review highlights recent developments in the preparation of organic–inorganic hybrid nanomaterials via polymerization-induced self-assembly.

One-Pot Synthesis of Oxidation-Sensitive Supramolecular Gels and Vesicles

Polypeptide-based nanoparticles offer unique advantages from a nanomedicine perspective such as biocompatibility, biodegradability, and stimuli-responsive properties to (patho)physiological conditions. Conventionally, self-assembled polypeptide nanostructures are prepared by first synthesizing their constituent amphiphilic polypeptides followed by postpolymerization self-assembly. Herein, we describe the one-pot synthesis of oxidation-sensitive supramolecular micelles and vesicles. This was achieved by polymerization-induced self-assembly (PISA) of the N-carboxyanhydride (NCA) precursor of methionine using poly(ethylene oxide) as a stabilizing and hydrophilic block in dimethyl sulfoxide (DMSO). By adjusting the hydrophobic block length and concentration, we obtained a range of morphologies from spherical to wormlike micelles, to vesicles. Remarkably, the secondary structure of polypeptides greatly influenced the final morphology of the assemblies. Surprisingly, wormlike micellar morphologies were obtained for a wide range of methionine block lengths and solid contents, with spherical micelles restricted to very short hydrophobic lengths. Wormlike micelles further assembled into oxidation-sensitive, self-standing gels in the reaction pot. Both vesicles and wormlike micelles obtained using this method demonstrated to degrade under controlled oxidant conditions, which would expand their biomedical applications such as in sustained drug release or as cellular scaffolds in tissue engineering.

Controlling the Multiple Chiroptical Inversion in Biphasic Liquid-Crystalline Polymers

While controlling the chirality and modulating the helicity is a challenging task, it attracts great research interest for gaining a better understanding of the origin of chirality in nature. Herein, structurally similar azobenzene (Azo) vinyl monomers were designed in which the alkyl chains comprised the chiral stereocenter with different achiral tail lengths. Combining the synchronous polymerization, supramolecular stacking and self-assembly, the multiple chiroptical inversion of the Azo-polymer supramolecular assemblies can be modulated by the tail length and DP of Azo blocks during in situ polymerization. The DP-, UV light-, temperature-, aging time-dependent chiroptical properties and liquid-crystalline (LC) characterization indicated that the amorphous-to-LC phase transition and biphasic LC interconversion allow the transcription of intra-chain π-π stacking, inter-chain H- and J-aggregation, thereby controlling the dynamic multiple reversal of supramolecular chirality.

Hydrogen Sulfide-Responsive Bicontinuous Nanospheres

Block copolymers (BCPs) that can self-assemble into particles and be triggered by disease-specific molecules such as hydrogen sulfide (H₂S) have the potential to impact on drug delivery, decreasing off-target toxicities while increasing drug efficacy. However, the incorporation of H₂S-responsive aryl azides into BCPs for self-assembly has been limited by heat, light, and radical sensitivities. In this study, a robust activator regenerated by the electron-transfer atom-transfer radical polymerization reaction was used to synthesize aryl-azide-containing BCPs under ambient conditions. Conditions controlling self-assembly of the BCPs into 150-200 nm particles and the physicochemical properties of the particles were investigated. The use of nanoprecipitation with tetrahydrofuran to promote self-assembly of the BCPs resulted in vesicle structures, while dimethylformamide or dimethylsulfoxide resulted in polymeric bicontinuous nanospheres (BCNs). Triggering of the BCPs and particles (vesicles or BCNs) via exposure to H₂S revealed that unsubstituted aryl azides were readily reduced (by HS^-), resulting in particle disruption or cross-linking. The relative polar nature of the particle bilayers containing unsubstituted aryl azides and the open structure of the BCNs did however limit encapsulation of small hydrophilic and hydrophobic payloads. Incorporation of a benzylamide substituent onto the aryl azide group increased the hydrophobicity of the particles and encapsulation of hydrophilic cargo but reduced sensitivity to H₂S, likely due to the reduced penetration of HS^- into the bilayer.

Polymerization-Induced Helicity Inversion Driven by Stacking Modes and Self-Assembly Pathway Differentiation

Regulating the mutual stacking arrangements is of great interest for understanding the origin of chirality at different hierarchical levels in nature. Different from molecular level chirality, the control and manipulation of hierarchical chirality in polymer systems is limited to the use of external factors as the energetically demanding switching stimulus. Herein, the first self-assembly strategy of polymerization-induced helicity inversion (PIHI), in which the controlled packing and dynamic stereomutation of azobenzene (Azo) building blocks are realized by in situ polymerization without any external stimulus, is reported. A multiple helicity inversion and intriguing helix-helix transition of polymeric supramolecular nanofibers occurs during polymerization, which is collectively confirmed to be mediated by the transition between functionality-oriented π-π stacking, H-, and J-aggregation. The studies further reveal that helicity inversion proceeds through a delicate interplay of the thermodynamically and kinetically controlled, pathway-dependent interconversion process, which should provide new insight into the origin and handedness control of helical nanostructures with desired chirality.

High-Yield Synthesis of Molecular Bottlebrushes via PISA-Assisted Grafting-from Strategy

To prepare molecular bottlebrushes with high yield via a grafting-from strategy using a reversible deactivation radical polymerization (RDRP) technique has always been a big challenge due to the intra- and intermolecular radical-radical coupling. Herein, a polymerization-induced self-assembly (PISA)-assisted grafting-from strategy based on reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization was developed to synthesize the Janus molecular bottlebrushes with a well-defined structure and high yield using polynorbornene-g-(poly(ethylene glycols)-branch-RAFT agent) (PNB-g-(PEG-branch-CTA)) as a solvophilic multifunctional macro-CTA. The results indicated the biradical coupling terminations of propagating side chains could be significantly suppressed due to the nanoconfinement effect in the PISA of the generated Janus molecular bottlebrushes. Janus molecular bottlebrushes with a narrow molecular weight distribution (M_w/M_n < 1.25) and negligible intermolecular cross-linking at monomer conversion as high as 84% were prepared, demonstrating the efficiency and versatility of the PISA-assisted grafting-from approach.

Precise Synthesis of π-Conjugated Block Copolymers and Polymerization-Induced Chiral Self-Assembly toward Helical Nanofibers with Circularly Polarized Luminescence

Precise synthesis and efficient self-assembly of semiconducting polymers are of great interest. Herein, we report the controlled synthesis of π-conjugated poly(phenyl isocyanide)-b-poly(phenyleneethylene) (PPI-b-PPE) copolymers via chain extension of ethynyl 4-iodobenzene initiated by Pd(II)-terminated helical poly(phenyl isocyanide) (PPI). The in-situ-generated block copolymers self-assembled into various supramolecular architectures depending on the PPE length. The helical PPI segment induced the block copolymers with an appropriate PPE length self-assemble into helical nanofibers with a controlled size and defined helicity. Interestingly, the chiral assemblies of the block copolymers exhibit intense optical activity and emit clear circularly polarized luminescence.

Polymerization-Induced Hierarchical Self-Assembly: From Monomer to Complex Colloidal Molecules and Beyond

The nanoscale hierarchical design that draws inspiration from nature's biomaterials allows the enhancement of material performance and enables multifarious applications. Self-assembly of block copolymers represents one of these artificial techniques that provide an elegant bottom-up strategy for the synthesis of soft colloidal hierarchies. Fast-growing polymerization-induced self-assembly (PISA) renders a one-step process for the polymer synthesis and in situ self-assembly at high concentrations. Nevertheless, it is exceedingly challenging for the fabrication of hierarchical colloids via aqueous PISA, simply because most monomers produce kinetically trapped spheres except for a few PISA-suitable monomers. We demonstrate here a sequential one-pot synthesis of hierarchically self-assembled polymer colloids with diverse morphologies via aqueous PISA that overcomes the limitation. Complex formation of water-immiscible monomers with cyclodextrin via "host-guest" inclusion, followed by sequential aqueous polymerization, provides a linear triblock terpolymer that can in situ self-assemble into hierarchical nanostructures. To access polymer colloids with different morphologies, three types of linear triblock terpolymers were synthesized through this methodology, which allows the preparation of AX_n-type colloidal molecules (CMs), core-shell-corona micelles, and raspberry-like nanoparticles. Furthermore, the phase separations between polymer blocks in nanostructures were revealed by transmission electron microscopy and atomic force microscopy-infrared spectroscopy. The proposed mechanism explained how the interfacial tensions and glass transition temperatures of the core-forming blocks affect the morphologies. Overall, this study provides a scalable method of the production of CMs and other hierarchical structures. It can be applied to different block copolymer formulations to enrich the complexity of morphology and enable diverse functions of nano-objects.

Expanding the Scope of Polymerization-Induced Self-Assembly: Recent Advances and New Horizons

Over the past decade or so, polymerization-induced self-assembly (PISA) has become a versatile method for rational preparation of concentrated block copolymer nanoparticles with a diverse set of morphologies. Much of the PISA literature has focused on the preparation of well-defined linear block copolymers by using linear macromolecular chain transfer agents (macro-CTAs) with high chain transfer constants. In this review, a recent process is highlighted from an unusual angle that has expanded the scope of PISA including i) synthesis of block copolymers with nonlinear architectures (e.g., star block copolymer, branched block copolymer) by PISA, ii) in situ synthesis of blends of polymers by PISA, and iii) utilization of macro-CTAs with low chain transfer constants in PISA. By highlighting these important examples, new insights into the research of PISA and future impact these methods will have on polymer and colloid synthesis are provided.

Nanostructured Multiphase Condensation of Complex Coacervates in Polymerization-Induced Electrostatic Self-Assembly

We present the nanostructured multiphase condensation of complex coacervates in the dynamic evolving aqueous medium of liquid-liquid phase separation driven polymerization-induced electrostatic self-assembly (LLPS-PIESA). We show that the parent droplets evolve into nanostructured coacervate-in-coacervate multiphase condensates with diverse morphologies, such as dandelions, worms, lamellae, vesicles, and vesicle polymers, upon the kinetically dictated recruitment of anionic free chains, cationic growing chains, and nascent clusters from the dynamic evolving aqueous medium of LLPS-PIESA, under the interplay of electrostatic and arginine-like salt bridge interactions.

How the Reactive End Group of Macro-RAFT Agent Affects RAFT-Mediated Emulsion Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly via reversible addition-fragmentation chain transfer (RAFT)-mediated emulsion polymerization is an emerging method in which macro-RAFT agents are chain extended with hydrophobic monomers in water to form block copolymer nano-objects. However, almost all RAFT-mediated emulsion polymerizations are limited to AB diblock copolymers by using monofunctional macro-RAFT agents with non-reactive end groups. In this study, the first investigation on how the reactive end group of macro-RAFT agent affects RAFT-mediated emulsion polymerization is reported. Three macro-RAFT agents with different end groups are synthesized and employed in RAFT-mediated emulsion polymerization. Effects of end groups on morphologies of block copolymer nano-objects and polymerization process are studied. Block copolymer nano-objects prepared by using an asymmetric difunctional macro-RAFT agent can be functionalized by further chain extension on the surface. It is expected that the current study will not only expand the scope of RAFT-mediated emulsion polymerization, but also provide a novel strategy to prepare functional polymer nanoparticles.

Recent Progress in Polymer Cubosomes and Hexosomes

Polymer cubosomes and hexosomes are polymer colloids with inverted lyotropic liquid crystal phases as internal structures. They are composed of regular networks of water-filled channels surrounded by a bilayer membrane made from amphiphilic block copolymers. Due to the uniform, tunable, and highly ordered porous structure, polymer cubosomes and hexosomes present numerous advantages over polymer micelles and vesicles, such as the high loading volumes for both hydrophilic and hydrophobic substances, large specific surface areas, and good mechanical and chemical stabilities. The polymer chemistry also enables unlimited molecular design to endow these polymer colloids with a lot of adjustable physical and chemical properties. Therefore, polymer cubosomes and hexosomes have attracted increasing attention for their potential applications in materials science and nanotechnology. This review outlines the recent progress in this field with an emphasis on the polymer architectures, the self-assembly conditions and mechanisms, and some application examples which are special for these inverted polymer colloids. It is hoped to provide some practical guidance for researchers interested in polymer cubosomes and hexosomes.

Small-Angle X-Ray Scattering Studies of Block Copolymer Nano-Objects: Formation of Ordered Phases in Concentrated Solution During Polymerization-Induced Self-Assembly

We report that polymerization-induced self-assembly (PISA) can be used to prepare lyotropic phases comprising diblock copolymer nano-objects in non-polar media. RAFT dispersion polymerization of benzyl methacrylate (BzMA) at 90 °C using a trithiocarbonate-capped hydrogenated polybutadiene (PhBD) steric stabilizer block in n-dodecane produces either spheres or worms that exhibit long-range order at 40 % w/w solids. NMR studies enable calculation of instantaneous copolymer compositions for each phase during the BzMA polymerization. As the PBzMA chains grow longer when targeting PhBD80 -PBzMA40 , time-resolved small-angle X-ray scattering reveals intermediate body-centered cubic (BCC) and hexagonally close-packed (HCP) sphere phases prior to formation of a final hexagonal cylinder phase (HEX). The HEX phase is lost on serial dilution and the aligned cylinders eventually form disordered flexible worms. The HEX phase undergoes an order-disorder transition on heating to 150 °C and a pure HCP phase forms on cooling to 20 °C.

Inverse Bicontinuous Structure by Polymerization-Induced Self-Assembly Against Single-Chain Nanoparticles

Polymer particles with inverse bicontinuous structures have attracted considerable attention due to their diverse applications. The conventional generation requires controlling numerous key parameters under strict conditions, such as solvent property, polymer composition, and architecture. In order to improve the preparation efficiency within a broad window, we employed a method by polymerization-induced self-assembly (PISA) against intramolecularly folded single-chain nanoparticles (SCNPs). The SCNPs bear an active site for further polymerization. The SCNPs with smaller sizes facilitate easier controlling of the packing parameter above unity to meet the requirement of the unique structures. The concept is demonstrated by forming the inverse bicontinuous structure through PISA in ethanol against two SCNPs of P4VP(SCNP_x%)₃₅-CTA and P(PEGMA₂₀-co-TMSPMA₄)(SCNP_16.7%)-CTA. The unique structure is easily achieved when growing a relatively shorter polymer chain within a broad window. The work paves the avenue to prepare polymer particles with the unique structure in large scale, and other functional materials are expected by using the functional SCNPs or favorable growth of desired materials within the particles.

Construction of Highly Ordered Glyco-Inside Nano-Assemblies through RAFT Dispersion Polymerization of Galactose-Decorated Monomer

Glyco-assemblies derived from amphiphilic sugar-decorated block copolymers (ASBCs) have emerged prominently due to their wide application, for example, in biomedicine and as drug carriers. However, to efficiently construct these glyco-assemblies is still a challenge. Herein, we report an efficient technology for the synthesis of glyco-inside nano-assemblies by utilizing RAFT polymerization of a galactose-decorated methacrylate for polymerization-induced self-assembly (PISA). Using this approach, a series of highly ordered glyco-inside nano-assemblies containing intermediate morphologies were fabricated by adjusting the length of the hydrophobic glycoblock and the polymerization solids content. A specific morphology of complex vesicles was captured during the PISA process and the formation mechanism is explained by the morphology of its precursor and intermediate. Thus, this method establishes a powerful route to fabricate glyco-assemblies with tunable morphologies and variable sizes, which is significant to enable the large-scale fabrication and wide application of glyco-assemblies.

Triggered Degradable Colloidal Particles with Ordered Inverse Bicontinuous Cubic and Hexagonal Mesophases

We herein report a facile strategy to prepare triggered degradable block copolymer nano/macro-objects, ranging from typical micelles, worms, jellyfish, and vesicles to rarely achieved spongosomes, cubosomes, and hexosomes via RAFT-mediated polymerization-induced self-assembly (PISA). The morphological transitions from a simple spherical micelle to a spongosome, ordered Im3¯m cubosome, and p6mm hexosome were captured and demonstrated by TEM, SEM, and synchrotron SAXS. In addition, morphological phase diagrams including important factors, such as solid contents, degree of polymerization (DP), and stabilizer block chain length, were constructed to unveil the formation mechanism and guide the scalable preparation of complex morphologies with packing parameter (P) > 1. This study not only represents an example that achieved inverse mesophases via acrylate-based monomers with high conversion but also reports a triggered degradable system in the most extended morphological range via PISA. The facile synthesis and stimuli-responsiveness of our system should greatly expand the utility of polymer inverse mesophases for triggered releasing, templating, and many other applications.

Type I Photoinitiator-Functionalized Block Copolymer Nanoparticles Prepared by RAFT-Mediated Polymerization-Induced Self-Assembly

Type I photoinitiators have been widely used in UV-vis curing technology for the fabrication of functional polymer materials such as coatings, inks, and adhesives. To overcome the drawbacks of using small molecular type I photoinitiators and expand the potential applications of UV-vis curing technology, attaching type I photoinitiators onto the surface of polymer colloids is an attractive strategy. Here we report a robust strategy for the efficient preparation of type I photoinitiator-functionalized block copolymer nanoparticles with various morphologies via aqueous reversible addition-fragmentation chain transfer (RAFT)-mediated polymerization-induced self-assembly (PISA), in which the photoinitiating ability of the type I photoinitiator end group provides a landscape for further functionalization. These block copolymer nanoparticles could also be used as heterogeneous photoinitiators to generate hydrogels with nanoparticles embedded inside. Significantly, the properties and functionalities of these hydrogels could be further controlled by using different block copolymer nanoparticles. This study provides a robust strategy toward the preparation of type I photoinitiator-functionalized block copolymer nanoparticles with the capacity to be modified with varying functionalities.

Constructing Cylindrical Nanostructures Via Directional Morphology Evolution Induced by Seeded Polymerization

Herein, spindle-shaped block copolymer (BCP) nanoparticles are used in seeded polymerization of methyl methacrylate as a novel approach to generating cylindrical nanostructures. The chain-extension of BCP seeds by an amorphous coil-type polymer within the seed core composed of semifluorinated liquid-crystalline blocks triggers the deforming, stretching, and directional growth of the seeds along the long axis, eventually leads to nanorods.

Shaping Block Copolymer Microparticles by pH-Responsive Core-Cross-Linked Polymeric Nanoparticles

Block copolymer microparticles with controllable morphology have drawn widespread attention owing to their promising applications in photonic materials, energy storage, and other areas. Hence, it is highly desired to achieve a controllable transformation of microparticle morphology. In this work, we report a simple method to shape the morphology of polystyrene-block-poly(dimethylsiloxane) (PS-b-PDMS) microparticles, by employing core-cross-linked polymeric nanoparticles (CNPs) as cosurfactants which are synthesized through cross-linking P4VP segment of PS-block-poly(4-vinylpyridine) (PS-b-P4VP). The addition of pH-responsive CNPs makes the shape of pH-inert PS-b-PDMS microparticles sensitive to pH value. The PS-b-PDMS microparticles transformed from elongated Janus pupa-like particles to onion-like particles by decreasing the pH value of the aqueous phase. The deformation mechanism is investigated by changing pH value, the weight fraction of CNPs, and surfactant property. This study provides a facile strategy to deform microparticles of pH-inert BCPs by tuning pH value, which is anticipated to be applicable to other non-pH-responsive BCP microparticles.

In situ cross-linking polymerization-induced self-assembly not only generates cross-linked structures but also promotes morphology transition by the cross-linker

Not only cross-linked structures but also a promoting effect on morphology transition has been observed during the in situ cross-linking PISA by RAFT dispersion copolymerization of 2-(diisopropylamino)ethyl methacrylate and cystaminebismethacrylamide.

The self-assembly of single chain Janus nanoparticles from azobenzene-containing block copolymers and reversible photoinduced morphology transitions

Azobenzene-containing liquid crystalline single chain Janus nanoparticles (LC-SCJNPs) were employed as building blocks to construct assemblies showing a reversible photoinduced morphology transition.

Photo-crosslinked polymer cubosomes as a recyclable nanoreactor in organic solvents

Photo-crosslinked polymer cubosomes can work as robust nanoreactor under organic solvent condition without structural degradation.

Forced gradient copolymerisation: a simplified approach for polymerisation-induced self-assembly

In this work, a novel and versatile gradient copolymerisation approach to simplify polymeric nanoparticle synthesis through polymerisation-induced self-assembly (PISA) is reported.

Direct formation of nano-objects via in situ self-assembly of conjugated polymers

The development of the polymer self-assembly method “in situ nanoparticlization of conjugated polymers” is discussed in this Perspective.

Transformable Colloidal Polymer Particles with Ordered Internal Structures

Based on studies combining experiments and simulations, internally ordered colloidal particles that are able to undergo morphological transformations both in shape and internal structure are presented. The particles are prepared by emulsion solvent evaporation-induced 3D soft confined assembly of di-block copolymer polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP). Control over the solvent selectivity leads to a dramatic change in shape and internal structure for particles. Pupa-like particles of lamellar morphology are obtained when using a non-selective solvent, while patchy particles possessing a plum pudding structure formed when the solvent is selective for PS-block. More interestingly, 3D soft confined annealing drives order-order morphological transformation of the particles. The morphology of reshaped particles can be well controlled by varying the solvent selectivity, annealing time, and interfacial interaction. The experimental results can be explained based on simulations. This study can offer considerable scope for the design of new stimuli-responsive colloidal particles for potential applications in photonic crystal, drug delivery and release, sensor and smart coating, etc.

Fluoropolymers in biomedical applications: state-of-the-art and future perspectives

Biomedical applications of fluoropolymers in gene delivery, protein delivery, drug delivery, ¹⁹F MRI, PDT, anti-fouling, anti-bacterial, cell culture, and tissue engineering.