Excited-state intramolecular proton-transfer (ESIPT)-inspired solid state emitters

AIE-ESIPT Photoluminescent Probe Based on 3-(3-Hydroxypyridin-2-yl)isoquinolin-4-ol for the Detection of Intracellular Hydrogen Peroxide

Excited-state intramolecular proton transfer (ESIPT) molecules, which feature large Stokes shifts to avoid self-absorption, play an essential role in photoluminescent bioimaging probes. Herein, we report the development of an ESIPT molecule 3-(3-hydroxypyridin-2-yl)isoquinolin-4-ol (PiQ). PiQ not only undergoes a distinct ESIPT process unlike the symmetrical 2,2'-bipyridyl-3,3'-diol but also exhibits aggregation-induced emission (AIE) characteristics. PiQ self-assembles into aggregates with an average size of 241.0±51.9 nm in aqueous solutions, leading to significantly enhanced photoluminescence. On the basis of the ESIPT and AIE characteristics of PiQ, the latter is functionalized with a hydrogen peroxide-responsive 4-pinacoratoborylbenzyl group (B) and a carboxylesterase-responsive acetyl group (A) to produce a photoluminescent probe B-PiQ-A. The potential of PiQ for applications in bioimaging and chemical sensing is underscored by its efficient detection of both endogenous and exogenous hydrogen peroxide in living cells.

Stepwise Excited-State Intramolecular Double Proton Transfer in 1,8-Dihydroxynaphthalene-2,7-dicarbaldehyde

We theoretically investigate the salient features of stepwise excited-state intramolecular double proton transfer (ESIDPT) in 1,8-dihydroxynaphthalene-2,7-dicarbaldehyde (DHDA). Surface trajectory simulations using the TD-B3LYP/6-31G(d) level of theory reveal that the proton transfer primarily happens via S1, wherein about ∼42% of trajectories (40 out of 95) show the single proton transfer alone and another ∼32% (30 out of 95) show double proton transfer. The average time scale for the single proton transfer originating from those ∼42% trajectories is ∼147 fs. In the case of double proton transfer, the average time for the first step, i.e., single proton transfer, is ∼54 fs, and the subsequent step, i.e., double proton transfer, completes in ∼151 fs. All three tautomers, i.e., normal, single, and double proton-transferred tautomers, possess a stable minimum in their first singlet excited state. This state has a ππ* character in the former two tautomers, resulting in a dual fluorescence emission phenomenon upon photoexcitation of DHDA.

π-Conjugation effects on excited-state intermolecular proton-transfer reactions of anthracene-urea derivatives in the presence of acetate anions

This study investigated emissive urea compounds with an anthryl moiety on one side and a substituent group (biphenyl, naphthyl, benzyl, or cyclohexyl) on the other side across from the urea group. This was performed to determine the contribution of π-conjugation on a substituent group to excited-state intermolecular proton-transfer (ESPT) reactions in the presence of acetate anions. Fluorescence lifetime measurements revealed that the rate constant of the ESPT reaction from the normal form to the tautomer form increased with the length of the π-conjugation. Considering that there were a few differences among the wavelengths of the fluorescence maxima for the anthracene-urea derivatives in the presence of acetate anions, we observed that the extension of π-conjugation promoted tautomer formation. This maintained the energy levels of the normal and tautomer forms in the excited state. Furthermore, an anthracene-urea derivative without π-conjugation did not undergo a reverse ESPT reaction, implying that π-conjugation is considerably involved in the reverse ESPT reaction from the tautomer form to the normal form.

Highly sensitive AIEE active fluorescent probe for detection of deferasirox: extensive experimental and theoretical studies

High concentrations of deferasirox (DFX) in living organisms cause hepatic, gastric and renal malfunctions. Therefore, it is significant to establish an accurate and efficient approach for the detection of deferasirox (DFX) to protect public health. Herein, we synthesized a thiourea-based diphenylacetamide probe MPT for the effective sensing of deferasirox through the fluorescence quenching phenomenon. The designed probe MPT shows a fluorescence quenching response toward deferasirox (DFX) through photo-induced electron transfer (PET). Furthermore, DFT studies were performed to support the experimental results. 1H-NMR titration experiment was used to explore the interaction type between probe MPT and DFX. The existence of non-covalent interactions was verified with spectroscopic studies that were assisted by NCI studies, QTAIM and SAPT0 analysis. Dynamic light scattering (DLS) analysis and scanning electron microscopy (SEM) were used to investigate the complexation of probe MPT with DFX. Moreover, the on-site solution phase and solid-state detection of DFX by probe MPT are executed. Additionally, the practical applications of probe MPT to sense DFX were also revealed in human plasma as well as in artificial urine samples.

Electrofluorochromic Hydrogels by Oligothiophene-Based Color-Tunable Fluorescent Dye Doping

Soft electronic materials hold great promise for advancing flexible functional devices. Among the various soft materials available, hydrogels are particularly attractive for soft electronic device development due to their inherent properties, including transparency, shape adaptability through swelling/deswelling, and self-healing capabilities. Transparent hydrogels contribute to the creation of advanced smart devices such as sensors, smart windows, and anticounterfeiting technologies. Poly(vinyl alcohol) hydrogels are used as a platform for creating electrofluorochromic (EFC) devices in combination with oligothiophene-conjugated benzothiazole derivatives (OCBs) as fluorescent emitters. OCBs demonstrated excited-state intramolecular proton transfer (ESIPT) behavior with a large Stokes shift and emission changes responsive to solvent polarity and pH stimuli. Even in the solid state, OCBs exhibited strong fluorescence emission across a wide range of colors from blue to red, making them exceptionally well-suited for EFC device development. Their quantum yields in the powder state were obtained between 2.3% and 19.9%. Through the incorporation of OCBs into a PVA hydrogel (OCB@PVA), we achieved the successful fabrication of flexible EFC devices, including electronic paper and smart panels. When electric potentials (-2.4 and +2.4 V) were applied in OCB@PVA, fluorescence color changes were observed by an electrochemically induced pH change owing to electrohydrolysis of water. These devices demonstrated the potential of OCB@PVA hydrogels in the realm of flexible electronics. They could be used to create innovative and versatile devices with stimuli-responsive fluorescence properties.

Bright ESIPT emission from 2,6-di(thiazol/oxazol/imidazol-2-yl)phenol derivatives in solution, aggregation and solid states

Most luminophores often suffer from the problem of aggregation-caused quenching (ACQ) or fluorescence disappearance in dilute solution. It is significant to bridge the gap between ACQ and AIE. In this work, a facile but effective strategy was proposed for the fabrication of always-on luminophores based on the excited state intramolecular proton transfer (ESIPT) mechanism, and six luminophores emitting bright fluorescence in solution, aggregation and solid states were synthesized from 5-tert-butyl-2-hydroxyisophthalaldehyde. All these ESIPT systems show only keto emission owing to their congested structures which block the breakage of intramolecular hydrogen bond (O-H⋯N) by solvation, and subsequently make enol emission impossible. Three of these luminophores are prone to convert into the corresponding phenolate anions emitting blue-shifted emission, which enable them to sense pH variation in the weakly basic range. Furthermore, white-light emission was achieved by combining two of them which show complementary-color fluorescence, and one of them was utilized for bioimaging of living Hela cells and the high-resolution image was obtained.

Experimental and theoretical comprehension of ESIPT fluorophores based on a 2-(2'-hydroxyphenyl)-3,3'-dimethylindole (HDMI) scaffold

Excited-State Intramolecular Proton Transfer (ESIPT) emission is associated with intense single or multiple fluorescence in the solid-state, along with enhanced photostability and sensitivity to the close environment. As a result, ESIPT probes are attractive candidates for ratiometric sensing of a variety of substrates. A new family of ESIPT fluorophores is described herein, inspired by the well-known 2-(2'hydroxyphenyl)benzazole (HBX) organic scaffold. The connection of 3,3'-dimethylindole (or 3H-indole) derivatives with phenol rings triggers the formation of novel 2-(2'-hydroxyphenyl)-3,3'-dimethylindole (HDMI) fluorophores, capable of stimuli-responsive ESIPT emission. This brand new family of dyes displays redshifted emission, as compared to HBX, along with an unprecedented acid/base-mediated stabilization of different rotamers, owing to supramolecular interactions with methyl groups. These compounds are therefore highly sensitive to external stimuli, such as the presence of acid or base, where protonated and deprotonated species have specific optical signatures. Moreover, a new pyridine-functionalized HDMI dye displays acid-sensitive AIE properties. The photophysical properties of all compounds have also been studied using ab initio calculations to support experiments in deciphering the nature of the various radiative transitions observed and the related excited rotameric species.

Mechanistic Insights into the Excited-State Intramolecular Proton Transfer (ESIPT) Process of 2-(2-Aminophenyl)naphthalene

The 2-(2-aminophenyl)naphthalene molecule attracted much attention due to excited-state intramolecular proton transfer (ESIPT) from an amino NH2 group to a carbon atom of an adjacent aromatic ring. The ESIPT mechanisms of 2-(2-aminophenyl)naphthalene are still unclear. Herein, the decay pathways of this molecule in vacuum were investigated by combining static electronic structure calculations and nonadiabatic dynamics simulations. The calculations indicated the existence of two stable structures (S0-1 and S0-2) in the S0 and S1 states. For the S0-1 isomer, upon excitation to the Franck-Condon point, the system relaxed to the S1 minimum quickly, and then there exist four decay pathways (two ESIPT ones and two decay channels with C atom pyramidalization). In the ESIPT decay pathways, the system encounters the S1S0-PT-1 or S1S0-PT-2 conical intersection, which funnels the system rapidly to the S0 state. In the other two pathways, the system de-excited from the S1 to the S0 state via the S1S0-1 or S1S0-2 conical intersection. For the S0-2 structure, the decay pathways were similar to those of S0-1. The dynamics simulations showed that 75 and 69% of trajectories experienced the two ESIPT conical intersections for the S0-1 and S0-2 structures, respectively. Our simulations showed that the lifetime of the S1 state of S0-1 (S0-2) is estimated to be 358 (400) fs. Notably, we not only found the detailed reaction mechanism of the system but also found that the different ground-state configurations of this system have little effect on the reaction mechanism in vacuum.

Excitation wavelength-dependent lanthanide-disalicylaldehyde coordination hybrid capable of distinguishing D2O from H2O

The increasing demands in fields of anti-counterfeiting, fluorescence analysis, clinical therapy and LED illumination are urgently eager for more excellent optically switchable luminescent materials with the stable and multimodal fluorescence in single-component matrix. Herein, the lanthanide-disalicylaldehyde coordination hybrid H2Qj4/TbxEuy is proposed as an efficient luminescent matrix to connect terbium sensibilization with ESIPT (excited-state intramolecular proton transfer) effects, and three multi-emission hybrids are finally designed and synthesized by regulating Tb3+ and Eu3+ ratios. Surprisingly, the H2Qj4/Tb0.91Eu0.09 shows the excitation wavelength-dependent luminescence in solution which originates from two energy transfer ways of terbium sensibilization effect. It exhibits green and red lights under the 369 and 394 nm UV lamp, respectively. Three hybrids are further used as lab-on-a-molecule fluorescent probes to perform multianalyte detection for various solvents by selected fluorescent sensing channels. By means of PCA (principal component analysis) and HCA (hierarchical cluster analysis), all of them can successfully detect and discriminate17 common solvents, especially the H2O and D2O. Moreover, the H2Qj4/Tb0.91Eu0.09 also shows the wide linear responses of H2O content in D2O, discrimination of two-component solvent mixtures, hygroscopicity evaluation of D2O and information encryption which will advance the progress of multimodal luminescent materials and multianalyte chemosensors.

Advancements in Small Molecule Fluorescent Probes for Superoxide Anion Detection: A Review

Superoxide anion (O2•-), a significant reactive oxygen species (ROS) within biological systems, plays a widespread role in cellular function regulation and is closely linked to the onset and progression of numerous diseases. To unveil the pathological implications of O2•- in these diseases, the development of effective monitoring techniques within biological systems is imperative. Small molecule fluorescent probes have garnered considerable attention due to their advantages: simplicity in operation, heightened sensitivity, exceptional selectivity, and direct applicability in monitoring living cells, tissues, and animals. In the past few years, few reports have focused on small molecule fluorescence probes for the detection of O2•-. In this small review, we systematically summarize the design and application of O2•- responsive small molecule fluorescent probes. In addition, we present the limitations of the current detection of O2•- and suggest the construction of new fluorescent imaging probes to indicate O2•- in living cells and in vivo.

Effect of external electric fields on the ESDPT process and photophysical properties of 1,8-dihydroxy-2-naphthaldehyde

In this work, by capitalizing on the density functional theory (DFT) and the time-dependent density functional theory (TD-DFT) methods, it has been systematically studied that the excited state double intramolecular proton transfer (ESDPT) process and the photophysical properties of 1,8-dihydroxy-2-naphthaldehyde (DHNA) are affected by the distinct external electric fields (EEFs). The obtained intramolecular hydrogen bond (IHB) parameters containing bond lengths and angles, as well as infrared (IR) vibrational spectra demonstrate that IHB strength changes in the distinct EEFs. Moreover, not only do the potential energy surfaces (PESs) indicate that the ESDPT process of DHNA is stepwise, but also increasing the positive EEF results in a decrease in the energy barrier accordingly, while vice versa. The absorption and fluorescence spectra also undergo a corresponding red or blue shift in the EEF; for instance, when the EEF changes from +10 × 10-4 a.u. to +20 × 10-4 a.u., the fluorescence peak undergoes a blue shift from 602 nm to 513 nm in the keto2 form. In a nutshell, the ESDPT process of DHNA can be influenced by the EEF, which will serve as a reference in regulating and controlling proton transfer that causes luminescence.

Luminescence turn-on sensor for the selective detection of trace water and methanol based on a Zn(ii) coordination polymer with 2,5-dihydroxyterephthalate

A highly selective detection of trace water in organic solvents is urgently required for the chemical industry. In this work, the simple sonochemical method was used for producing a luminescent sensor, [Zn(H2dhtp)(2,2'-bpy)(H2O)]n (Zn-CP) (H2dhtp2- = 2,5-dihydroxyterephthalate and 2,2'-bpy = 2,2'-bipyridine). Zn-CP exhibits reversible thermally-induced and methanol-mediated structural transformation. Importantly, Zn-CP has exceptional water sensing performance in both dry methanol and dry ethanol, with high selectivity, wide linear ranges, and a low limit of detection (LOD) of 0.08% (v/v). Upon the incremental addition of water, the luminescent intensities enhanced and shifted, along with the emission color changing from green to greenish yellow. In addition, Zn-CP can detect methanol selectively through turn-on luminescence intensity with LODs of 0.28, 0.52, and 0.35% (v/v) in dry ethanol, dry n-propanol, and dry n-butanol, respectively. The excited-state proton transfer of linker H2dhtp2-via enol-keto tautomerism and collaboration with structural transformation could be attributed to the sensing mechanism.

Effects of substitution and conjugation on photophysical properties of ESIPT-based fluorophores with the core of 4-aminophthalimide

4-Aminophthalimide is a highly fluorescent signaling unit with excellent photophysical properties and wide application foregrounds. Based on this, a range of theoretical investigations are conducted on the fluorescent probe (E)-5-((2-hydroxybenzylidene) amino) isoindoline-1, 3-dione (HID) with the core of 4-aminophthalimide using density functional theory (DFT) and time-containing density functional theory (TD-DFT) methods in this paper. The optimized configurations, vertical excitation and emission energies, electronic characteristics and excited-state intramolecular proton transfer (ESIPT) behaviors of the probe HID are discussed in detail. Furthermore, to enhance the luminescent properties of HID, five novel compounds have been designed based on the structure of HID by introducing amino, methoxy and naphthalene groups (-NH2, -OMe and C10H8). Our work thoroughly explores how the property and position of substituents and conjugation affect photophysical characteristics and ESIPT processes. We find that the ESIPT dynamics can be modulated by the substitution and conjugation effects. Specifically, the introduction of amino and methoxy groups at the ortho-position and the introduction of the naphthalene group promote the ESIPT behavior of HID1, whereas the introduction of amino and methoxy groups at the meta-position exhibits the contrary impact. Therefore, we boldly infer that the introduction of electron-donating groups in the ortho-position and the introduction of the conjugated group make the ESIPT process more effortless to occur, whereas the introduction of substituents with opposing natures in the meta-position makes the ESIPT process more difficult to occur. In addition, the ionization potentials (IP), electron affinities (EA) and reorganization energies (λh and λe) of molecules are calculated to assess their potential as luminescent materials. Our work not only reveals the luminescence and ESIPT mechanism of the probe HID1, but also proposes to modulate the ESIPT process through the substitution and conjugation effects. In particular, the designed molecules have better photoelectric properties as a result of their red-shifted absorption and fluorescence spectra, smaller energy gaps, larger transferred charges and greater charge transferred distances, which offers some valuable ideas for the experimental development of more efficient organic luminescent materials with ESIPT properties.

Multi-site isomerization of synergistically regulated stimuli-responsive AIE materials toward multi-level decryption

Stimuli-responsive aggregation-induced emission (AIE) materials are highly sensitive and rapidly responsive to external signals, making them ideal solid materials for anti-counterfeiting encryption. However, the limited conformational and packing variations resulting from regio-isomerization with a single substituent restricts the stimuli-responsive behavior of these materials. In this work, several AIE-active regio-structural isomers based on the salicylaldehyde Schiff base scaffold have been straightforwardly obtained through multiple substitutions with bromide and triphenylamine moieties. Solvent-effect experiments demonstrate their different orders of charge-transfer and excited-state intramolecular proton transfer upon photoexcitation, indicating the regulation of excited-state processes via multi-site isomerization. These isomers also demonstrate mechanochromism and acidichromism, allowing for adjustable stimuli-responsive effects. As a demonstration, p-Br-TPA with both mechanochromism and acidichromism can be synergistically utilized for multi-level decryption. This study successfully regulates the evolution of excited states through multi-site isomerization, offering a general approach for achieving tunable stimuli-responsive properties in AIE-active salicylaldehyde Schiff bases toward multi-level decryption.

Photostimulated Covalent Linkage Transformation Isomerizing Covalent Organic Frameworks for Improved Photocatalytic Performances

Covalent organic frameworks (COFs) offer a desirable platform to explore multichoromophoric arrays for photocatalytic conversion. Symmetric arrangement of choromophoric modules over π-extended frameworks enhances exciton delocalization while impairing excitation density and accordingly photochemical reactivity. Herein, a photoisomerization-driven strategy is proposed to break the excited-state symmetry of ketoenamine-linked COFs with multichoromophoric arrays. Incorporating electron-withdrawing benzothiadiazole facilitates the ultrafast excited-state intramolecular proton transfer (ESIPT) from enamine to keto within 140 fs, resulting in partially enolized COF isomers. The hybrid linkages containing imine and enamine bonds at the node of framework alter the symmetry of electronic structure and enforce the photoinduced charge separation. Increasing the imine-to-enamine ratio further promotes the electron transferred number in a long range, thereby affording the optimum photocatalytic hydrogen evolution rate. This work put forward an ESIPT-induced photoisomerization to build a symmetry-breaking COF with weakened exciton effect and enhanced photochemical reactivity.

Reticular chemistry guided precise construction of zirconium-pentacarboxylate frameworks with 5-connected Zr6 clusters

Zirconium-based metal-organic frameworks (Zr-MOFs) have been extensively studied due to their very rich structural chemistry. The combination of nearly unlimited carboxylic acid-based linkers and Zr6 clusters with multiple connectivities has led to diverse structures and specific properties of resultant Zr-MOFs. Herein, we demonstrate the successful use of reticular chemistry to construct two novel Zr-MOFs, HIAM-4040 and HIAM-4040-OH, with zfu topology. Based on a thorough structural analysis of (4,4)-connected lvt-type Zr-tetracarboxylate frameworks and a judicious linker design, we have obtained the first example of a Zr-pentacarboxylate framework featuring unprecedented 5-connected organic linkers and 5-connected Zr6 clusters. Compared with HIAM-4040, a larger Stokes shift is achieved in HIAM-4040-OH via hydroxyl group induced excited-state intramolecular proton transfer (ESIPT). HIAM-4040-OH exhibits high chemical and thermal stability and is used for HClO detection in aqueous solution with excellent sensitivity and selectivity.

Azaindolizine proton cranes attached to 7-hydroxyquinoline and 3-hydroxypyridine: a comparative theoretical study

Theoretical design of several proton cranes, based on 7-hydroxyquinoline and 3-hydroxypyridine as proton-transfer frames, has been attempted using ground and excited-state density functional theory (DFT) calculations in various environments. Imidazo[1,2-a]pyridine, pyrazolo[1,5-a]pyridine and benzimidazole were considered as proton crane units. The proton crane action requires the existence of a single enol-like form in the ground state, which under excitation goes to the end keto-like one through a series of consecutive excited-state intramolecular proton transfers (ESIPT) and twisting steps with the participation of a crane unit, resulting in a long-range intramolecular proton transfer. The results suggest that 3-hydroxypyridine is not suitable for a proton-transfer frame and 8-(imidazo[1,2-a]pyridin-2-yl)quinolin-7-ol and 8-(pyrazolo[1,5-a]pyridin-2-yl)quinolin-7-ol behave as non-conjugated proton cranes, instead of tautomeric re-arrangement in the latter, which was thought to be possible.

Dynamic Motions of Ligands around the Metal Centers Afford a Fidget Spinner-Type AIE Luminogen

A new type of aggregation-induced emission (AIE) luminogen containing a dimeric metal fragment and two or three phthalazine ligands is described, which shows dynamic motions of ligands around the metal centers in solution. Based on the variable-temperature and EXSY NMR spectroscopy data, X-ray crystallography structures, and computational results, three different pathways (i.e., reversible exchange with haptotropic shifts, circulation of ligands around the dimeric metal fragment, and walking on the spot of ligands on the metal centers) were considered for this dynamic behavior. Restriction of these dynamic processes in the aggregate forms of the compounds (in H2O/CH3CN solvent mixtures) contributes to their AIE. DFT calculations and NMR analysis showed that bright excited states for these molecules are not localized on isolated molecules, and the emission of them stemmed from π-dimers or π-oligomers. The morphologies and the mode of associations in the solvent mixtures were determined by using transmission electron microscopy (TEM) and concentration-dependent NMR spectroscopy. The computational results showed the presence of a conical intersection (CI) between the S0 and S1 excited state, which provides an accessible pathway for nonradiative decay in these systems.

Activatable organic probes for in situ imaging of biomolecules

Biomolecules are fundamental for various chemical and biological processes of living organisms. High-resolution in situ imaging of the dynamics and local distribution of biomolecules may facilitate better interpretation of diverse complex cell events in the biomedicine field. In different advanced imaging tools, fluorescence imaging-based activatable organic probes can be noninvasively and effortlessly internalized into cells and can be easily modified, which is essential for the in situ imaging of targets in living organisms. We here briefly summarize the existing general design strategies of activatable organic probes for retaining the fluorescence signal inside cells. We particularly describe the bioapplication of these probes for the in situ bioimaging. This review is expected to promote the development of new molecular tools for extending the application of these in situ imaging strategies to other biomolecules.

Theoretical studies on the photo protective mechanism of curcuminoids

In this work, the deactivation pathways of curcuminoids after photoexcitation was studied by employing density functional theory to explore their UVA radiation screening capacity. A comprehensive computational characterization of the excited-state processes of curcumin, demethoxycurcumin, and bis-demethoxycurcumin was done. The molecules exist in diketo and enol forms which are in equilibrium and interconvertible through keto-enol tautomerism. The enolic forms of each of the studied molecules have eight geometric cis-trans isomers as a result of torsion rotation about three different carbon-carbon double bonds across the aliphatic chain. For each geometric isomer, sixteen possible rotamers are found to exist due to rotation about five different carbon-carbon single bond rotations, also across the skeleton of the aliphatic chain. Upon photoexcitation, the studied molecules follow three main pathways of radiationless decay: (a) rotamerism and interconversion between rotamers of comparable energies which are in equilibrium, (b) interconversion between the cis-trans geometrical isomers where an efficient vibrational relaxation path is formed at ∼90° during torsion rotation about carbon-carbon double bond, and (c) excited state intramolecular proton transfer in a single O-H stretching vibration through a cyclic intramolecular hydrogen bonded ring formed at the centre of the molecule giving back the original structure. The absorption and emission spectra of the molecules were also simulated where the theoretically obtained absorption and emission maxima are close to the reported experimental values.

Fluorogen-Functionalized Mesoporous Silica Hybrid Sensing Materials: Applications in Cu2+ Detection

Since Cu2+ ions play a pivotal role in both ecosystems and human health, the development of a rapid and sensitive method for Cu2+ detection holds significant importance. Fluorescent mesoporous silica materials (FMSMs) have garnered considerable attention in the realm of chemical sensing, biosensing, and bioimaging due to their distinctive structure and easily functionalized surfaces. As a result, numerous Cu2+ sensors based on FMSMs have been devised and extensively applied in environmental and biological Cu2+ detection over the past few decades. This review centers on the recent advancements in the methodologies for preparing FMSMs, the mechanisms underlying sensing, and the applications of FMSMs-based sensors for Cu2+ detection. Lastly, we present and elucidate pertinent perspectives concerning FMSMs-based Cu2+ sensors.

The solvent-regulated excited state reaction mechanism of 2-(2'-hydroxyphenyl)benzothiazole aggregates

The excited state relaxation dynamics of 2-(2'-hydroxyphenyl)benzothiazole (HBT) in the gas phase and the solvents have been explored experimentally and theoretically. However, the fundamental mechanism of its emission in aggregates is still unexplored. In this article, we have presented a detail investigation of solvent-regulated excited state (ES) reactions for HBT aggregates with the aid of several experimental and theoretical research. The careful investigation of solvatochromic and electrochemical behavior elucidates that the emission around 460 nm of HBT in DMSO and DMSO-water fraction correspond to the excited state internal charge transfer (ESICT). The quantum chemical analysis further supports this observation. The concentration-dependent 1H NMR and emission studies of HBT in DMSO revealed the formation of aggregates at higher concentrations that facilitate the charge transfer. The emission pattern of HBT in the AcN-water fraction demonstrates that the sequential internal charge transfer-proton transfer (ESICT-ESIPT) occurs in HBT aggregates. The pH studies show that HBT aggregates are potential ratiometric sensors for near-physiological pH ranges. Moreover, a ground-state zwitterionic conformation of HBT is observed in the basic medium formed by ground-state internal proton transfer (GSIPT). Overall, this study provides a better understanding of solvent-regulated ES reaction mechanism in the case of HBT aggregates and other substituted HBT compound aggregates published previously.

A tuning fork-shaped bisbenzothiazole derivative as a pH-responsive digital fluorescent probe and its ex vivo evaluation

A new highly emissive pH-responsive near-IR active digital probe was designed and synthesized. The probe is based on a bisbenzothiazole motif with a highly vulnerable hydrogen unit attached in an intramolecular fashion. The probe produced a large Stokes shift which was observed to be highly pH dependent. The optical pH dependence can be used for sensing pH over a wide range.

Excitation wavelength-dependent multi-coloured and white-light emissive pyrene-based hydrazones: suppression of Kasha's rule

Multi-coloured and white-light emissions from pyrene-based hydrazones are described. They exhibit excitation wavelength-dependent emissions in solution due to the suppression of Kasha's rule. Interestingly, in dimethylformamide, 1-3 emit light that covers all the regions of primary colours as a function of excitation wavelength, and 1 and 2 emit white light (λex = 420 nm) in isopropanol.

Amphiphilic Molecules Exhibiting Zwitterionic Excited-State Intramolecular Proton Transfer and Near-Infrared Emission for the Detection of Amyloid β Aggregates in Alzheimer's Disease

Chromophores with zwitterionic excited-state intramolecular proton transfer (ESIPT) have been shown to have larger Stock shifts and red-shifted emission wavelengths compared to the conventional π-delocalized ESIPT molecules. However, there is still a dearth of design strategies to expand the current library of zwitterionic ESIPT compounds. Herein, a novel zwitterionic excited-state intramolecular proton transfer system is reported, enabled by addition of 1,4,7-triazacyclononane (TACN) fragments on a dicyanomethylene-4H-pyran (DCM) scaffold. The solvent-dependent steady-state photophysical studies, pKa measurements, and computational analysis strongly support that the ESIPT process is more efficient with two TACN groups attached to the DCM scaffold and not affected by polar protic solvents. Impressively, compound DCM-OH-2-DT exhibits a near-infrared (NIR) emission at 740 nm along with an uncommonly large Stokes shift. Moreover, DCM-OH-2-DT shows high affinity towards soluble amyloid β (Aβ) oligomers in vitro and in 5xFAD mouse brain sections, and we have successfully applied DCM-OH-2-DT for the in vivo imaging of Aβ aggregates and demonstrated its potential use as an early diagnostic agent for AD. Overall, this study can provide a general molecular design strategy for developing new zwitterionic ESIPT compounds with NIR emission in vivo imaging applications.

Excited-state relaxation mechanisms of 2,2'-(1-phenyl-1H-1,2,4-triazole-3,5-diyl)diphenol: single- or double-proton transfer?

Triazole compounds are important organic systems with excellent electronic properties, which have diagnostic potential in the fields of organic electronics and organic photovoltaics. The important photophysical nature of these systems is the transformation between the enol and keto forms after excited-state proton transfer. In this study, the IR vibrational spectrum, ESIPT mechanism, and excited-state decay dynamics of 2,2'-(1-phenyl-1H-1,2,4-triazole-3,5-diyl)diphenol (ExPh) were explored using electronic structure calculations and non-adiabatic dynamics simulations. Two S1/S0 conical intersections with distinct proton transfer (ESIPT-I and ESIPT-II) involved were obtained. The associated two-dimensional S1 minimum-energy potential energy surface indicated that the dynamical roles of these two S1/S0 conical intersections in the S1 excited-state decay were quite different. The ESIPT-I reaction was more favorable to occur than the ESIPT-II process. Our dynamics simulations supported this hypothesis with the whole trajectories decaying to the ground state via the S1S0-1 conical intersection, which involved the ESIPT-I process. The ESIPT-Involved efficient deactivation pathway could be partially responsible for the decrease in fluorescence emission. These results and ESIPT mechanisms are helpful for understanding the decay pathways of similar systems.

Solid-State Solvent-Independent Excited-State Intramolecular Proton Transfer in a Coordination Polymer and Its Temperature Dependence

Increasing demand for futuristic switches and sensors around the world has created an intense interest in smart materials, which can show a rapid but feature-dependent change in the physical properties in the presence of external stimuli. Hitherto such changes in the photophysical property of materials, specifically in the solid state, are projected for the use of smart on-off switches. Materials having an external-stimuli-responsive change in the photophysical properties like excited-state intramolecular proton transfer (ESIPT) can also be utilized for these purposes. Although the event of solid-state ESIPT is not new in the domain of material chemistry, especially for organic molecules, it was never observed for coordination polymers (CPs). Previous instances of ESIPT in CPs have necessitated the presence of a solvent as a suspension medium, driving a solvent-assisted ESIPT phenomenon. However, the emergence of a solvent-independent ESIPT-enabled CP presents unique advantages. The well-defined periodic arrangement ensures reliable property variations, while the robust coordination bonds between the metal nodes and ligands provide durability in harsh environments. Addressing this gap, we present the first ever solid-state, solvent-free, and solvent-independent ESIPT-active CP. Remarkably, this CP exhibits temperature-dependent ESIPT on-off behavior, demonstrating its potential as a cutting-edge material in the field of smart switches and sensors.

In silico design of bio-marker detection fluorescent probes

Fluorescent probes capable of sensing the biological medium are of utmost importance in medical diagnostics. However, the optical spectrum of such probes needs to be tuned with care for compatibility with living tissues. More specifically, fluorescent bioprobes must be adjusted so as to avoid light interference with pigments (e.g. hemoglobin), tissue photodamage, scattering of the emitted light, and autofluorescence. This leads to two important conditions on the optical spectrum of the probes. On the one hand, the emission wavelength must be in an optical window of 650 to 950 nm. On the other hand, the Stokes shift must be large, ideally greater than 150 nm. In this paper, we showcase the in-silico design of potential fluorescent biomarkers fulfilling these two conditions by means of heteroatomic substitution and conjugation on a 1,2,4-triazole core initially far away from biological standards.

A brand-new type of excited-state proton transfer (ESIPT) molecule based on sulfoxide/sulfenic acid tautomerism

The excited-state proton transfer (ESIPT) behavior of organic fluorophores has attracted much attention due to their unique photophysical properties. So far, ESIPT studies have mainly focused on the transfer of hydrogen atoms between N-N, N-O, or O-O. In this work, a brand-new type of ESIPT molecule based on sulfoxide/sulfenic acid tautomerism has been thoroughly investigated. The sulfoxide/sulfenic acid tautomerization process requires one step and two steps in the ground and first excited singlet states, respectively. A range of density functional theory and time-dependent density functional theory methods have been employed to investigate these structures, and the changes in aromaticity may be responsible for obtaining the ESIPT process. This work presents a novel ESIPT process, showcasing molecules that exhibit distinctive properties compared to conventional ESIPT compounds. These findings are expected to expand the horizons of experimental research in ESIPT.

Complexes on the Base of a Proton Transfer Capable Pyrimidine Derivative: How Protonation and Deprotonation Switch Emission Mechanisms

A rare example of pyrimidine-based ESIPT-capable compounds, 2-(2-hydroxyphenyl)-4-(1H-pyrazol-1-yl)-6-methylpyrimidine (HLH), was synthesized (ESIPT─excited state intramolecular proton transfer). Its reactions with zinc(II) salts under basic or acidic conditions afforded a dinuclear [Zn2LH2Cl2] complex and an ionic (H2LH)4[ZnCl4]2·3H2O solid. Another ionic solid, (H2LH)Br, was obtained from the solution of HLH acidified with HBr. In both ionic solids, the H+ ion protonates the same pyrimidinic N atom that accepts the O-H···N intramolecular hydrogen bond in the structure of free HLH, which breaks this hydrogen bond and switches off ESIPT in these compounds. This series of compounds which includes neutral HLH molecules and ionic (LH)- and (H2LH)+ species allowed us to elucidate the impact of protonation and coordination coupled deprotonation of HLH on the photoluminescence response and on altering the emission mechanism. The neutral HLH compound exhibits yellow emission as a result of the coexistence of two radiative decay channels: (i) T1 → S0 phosphorescence of the enol form and (ii) anti-Kasha S2 → S0 fluorescence of the keto form, which if feasible due to the large S2-S1 energy gap. However, owing to the efficient nonradiative decay through an energetically favorable conical intersection, the photoluminescence quantum yield of HLH is low. Protonation or deprotonation of the HLH ligand results in the significant blue-shift of the emission bands by more than 100 nm and boosts the quantum efficiency up to ca. 20% in the case of [Zn2LH2Cl2] and (H2LH)4[ZnCl4]2·3H2O. Despite both (H2LH)4[ZnCl4]2·3H2O and (H2LH)Br have the same (H2LH)+ cation in the structures, their emission properties differ significantly, whereas (H2LH)Br shows dual emission associated with two radiative decay channels: (i) S1 → S0 fluorescence and (ii) T1 → S0 phosphorescence, (H2LH)4[ZnCl4]2·3H2O exhibits only fluorescence. This difference in the emission properties can be associated with the external heavy atom effect in (H2LH)Br, which leads to faster intersystem crossing in this compound. Finally, a huge increase in the intensity of the phosphorescence of (H2LH)Br on cooling leads to pronounced luminescence thermochromism (violet emission at 300 K, sky-blue emission at 77 K).

Excited-State Proton Transfer in Luminescent Dyes: From Theoretical Insight to Experimental Evidence

The effective utilization of luminescent dyes often relies on a comprehensive understanding of their excitation and relaxation pathways. One such pathway, Excited-State Proton Transfer (ESPT), involves the tautomerization of the dye in its excited state, resulting in a new structure that exhibits distinct emission properties, such as a very large Stokes' shift or dual-emission. Although the ESPT phenomenon is well-explained theoretically, its experimental demonstration can be challenging due to the presence of numerous other phenomena that can yield similar experimental observations. In this review, we propose that an all-encompassing methodology, integrating experimental findings, computational analyses, and a thorough evaluation of diverse mechanisms, is essential for verifying the occurrence of ESPT in luminescent dyes. Investigations have offered significant understanding of the elements impacting the ESPT process and the array of approaches that can be used to validate the existence of ESPT. These discoveries hold crucial ramifications for the advancement of molecular probes, sensors, and other applications that depend on ESPT as a detection mechanism.

Janus-Type ESIPT Chromophores with Distinctive Intramolecular Hydrogen-bonding Selectivity

Excited-state intramolecular proton transfer (ESIPT)-based solid luminescent materials with multiple hydrogen bond acceptors (HBAs) remain unexplored. Herein, we introduced a family of Janus-type ESIPT chromophores featuring distinctive hydrogen bond (H-bond) selectivity between competitive HBAs in a single molecule. Our investigations showed that the central hydroxyl group preferentially forms intramolecular H-bonds with imines in imine-modified 2-hydroxyphenyl benzothiazole (HBT) chromophores but tethers the benzothiazole moiety in hydrazone-modified HBT chromophores. Imine-derived HBTs generally exhibit higher fluorescence efficiency, while hydrazone-derived HBTs show a reduced overlap between the absorption and fluorescence bands. Quantum chemical calculations unveiled the molecular origins of the biased intramolecular H-bonds and their impact on the ESIPT process. This Janus-type ESIPT chromophore skeleton provides new opportunities for the design of solid luminescent materials.

Aggregation behaviour of pyrene-based luminescent materials, from molecular design and optical properties to application

Molecular aggregates are self-assembled from multiple molecules via weak intermolecular interactions, and new chemical and physical properties can emerge compared to their individual molecule. With the development of aggregate science, much research has focused on the study of the luminescence behaviour of aggregates rather than single molecules. Pyrene as a classical fluorophore has attracted great attention due to its diverse luminescence behavior depending on the solution state, molecular packing pattern as well as morphology, resulting in wide potential applications. For example, pyrene prefers to emit monomer emission in dilute solution but tends to form a dimer via π-π stacking in the aggregation state, resulting in red-shifted emission with quenched fluorescence and quantum yield. Over the past two decades, much effort has been devoted to developing novel pyrene-based fluorescent molecules and determining the luminescence mechanism for potential applications. Since the concept of "aggregation-induced emission (AIE)" was proposed by Tang et al. in 2001, aggregate science has been established, and the aggregated luminescence behaviour of pyrene-based materials has been extensively investigated. New pyrene-based emitters have been designed and synthesized not only to investigate the relationships between the molecular structure and properties and advanced applications but also to examine the effect of the aggregate morphology on their optical and electronic properties. Indeed, new aggregated pyrene-based molecules have emerged with unique properties, such as circularly polarized luminescence, excellent fluorescence and phosphorescence and electroluminescence, ultra-high mobility, etc. These properties are independent of their molecular constituents and allow for a number of cutting-edge technological applications, such as chemosensors, organic light-emitting diodes, organic field effect transistors, organic solar cells, Li-batteries, etc. Reviews published to-date have mainly concentrated on summarizing the molecular design and multi-functional applications of pyrene-based fluorophores, whereas the aggregation behaviour of pyrene-based luminescent materials has received very little attention. The majority of the multi-functional applications of pyrene molecules are not only closely related to their molecular structures, but also to the packing model they adopt in the aggregated state. In this review, we will summarize the intriguing optoelectronic properties of pyrene-based luminescent materials boosted by aggregation behaviour, and systematically establish the relationship between the molecular structure, aggregation states, and optoelectronic properties. This review will provide a new perspective for understanding the luminescence and electronic transition mechanism of pyrene-based materials and will facilitate further development of pyrene chemistry.

The Keto-Switched Photocatalysis of Reconstructed Covalent Organic Frameworks for Efficient Hydrogen Evolution

The keto-switched photocatalysis of covalent organic frameworks (COFs) for efficient H2 evolution was reported for the first time by engineering, at a molecular level, the local structure and component of the skeletal building blocks. A series of imine-linked BT-COFs were synthesized by the Schiff-base reaction of 1, 3, 5-benzenetrialdehyde with diamines to demonstrate the structural reconstruction of enol to keto configurations by alkaline catalysis. The keto groups of the skeletal building blocks served as active injectors, where hot π-electrons were provided to Pt nanoparticles (NPs) across a polyvinylpyrrolidone (PVP) insulting layer. The characterization results, together with density functional theory calculations, indicated clearly that the formation of keto-injectors not only made the conduction band level more negative, but also led to an inhomogeneous charge distribution in the donor-acceptor molecular building blocks to form a strong intramolecular built-in electric field. As a result, visible-light photocatalysis of TP-COFs-1 with one keto group in the skeletal building blocks was successfully enabled and achieved an impressive H2 evolution rate as high as 0.96 mmol g-1  h-1 . Also, the photocatalytic H2 evolution rates of the reconstructed BT-COFs-2 and -3 with two and three keto-injectors were significantly enhanced by alkaline post-treatment.

Multiple fluorescence and hydrogen peroxide-responsive properties of novel triphenylamine-benzothiazole derivatives

A novel fluorescent dye molecule - triphenylamine (TPA)-benzothiazole (BZT) - based on excited state intramolecular proton transfer (ESIPT) was prepared by the Suzuki coupling reaction. The photophysical property assay indicates that BZT-TPA appeared in distinguishable colors in mixed solvents with different water contents. Moreover, BZT-TPA exhibited observable AIE behavior. On this basis, a fluorescent probe BZT-TPA-BO was synthesized for detecting H2O2. This probe molecule was found to have excellent selectivity, rapid response, and good linear relationship (R2 = 0.989) for detecting H2O2 in aqueous medium. Through DFT calculation, fluorescence spectrum, nuclear magnetic titration and HR-MS, the mechanism of recognition of H2O2 by the probe BZT-TPA-BO is proposed. In addition, the probe BZT-TPA-BO to some extent exhibited better performance for detecting exogenous H2O2 in HeLa cells.

Control of the fluorescence molecule 2-(2'-hydroxyphenyl) benzothiazole derivatives by introducing electron-donating and withdrawing substituents groups

Using density functional theory (DFT) and time-dependent density functional theory (TDDFT), we investigate the fluorescence mechanism of (E)-4-(3-(benzo[d]thiazol-2-yl)-2-hydroxy-5-methylstyryl)-1-methylpyridin-1-ium (HBTMY) and the excited-state intramolecular proton transfer process (ESIPT) of hydroxyphenyl. Herein, we introduce two electron-donating (amino and methoxy) and two electron-withdrawing (hydrogen and cyano) groups into HBTMY to study their effects on the fluorescence and the ESIPT process. Structural parameters, infrared vibration frequency, vertical excitation and emission energies as well as frontier molecular orbitals show that the substituents have different impacts on intramolecular hydrogen bonding behavior. The result shows that the fluorescence wavelength of molecules with the amino group could reach the near-infrared area, which favors using this fluorescence in the living cell. As the ability of electron-absorbing groups increases, the forward energy barrier in the potential energy curves decreases sharply making the ESIPT process more familiar to take place. Thus, this work offers a guide for cell imaging and provides strategies to adjust and control fluorescence by introducing substituents.

A novel HBI-based ratiometric fluorescent probe for rapid detection of trifluoroborate

A 2-(2'-hydroxyphenyl)benzimidazole (HBI)-based ratiometric fluorescent probe, known as BTEP, was synthesized using 5-bromosalicylaldehyde as the raw material via Sonogashira coupling and condensation reaction. This probe was designed for rapid detection of boron trifluoride solutions and gases. The N and O coordination atoms in the probe undergo a boron difluoride addition with BF3, which affects the process of excited state intramolecular proton transfer (ESIPT) leading to a blue shift of fluorescence emission. Obvious changes in the fluorescence signal can be observed within 60 seconds. The introduction of an acetylene trimethylsilane fragment increases the conjugate plane and is beneficial to improving the selectivity of the probe. The I408/I479 fluorescence ratio of the probe displays a linear relationship with the concentration of BF3 in the range of 5-50 μM, with a detection of limit as low as 69.5 nM. Furthermore, the probe demonstrates specific and selective recognition of BF3 among eight common interference substances. Test strips prepared using BTEP have the capability of real-time naked-eye detection of trace BF3 gas.

Synthesis of a Cd-MOF Fluorescence Sensor and Its Detection of Fe3+, Fluazinam, TNP, and Sulfasalazine Enteric-Coated Tablets in Aqueous Solution

A Cd-based metal-organic framework (Cd-MOF), named after {[Cd(ttc)(H₂O)]·H₂O}_n (ttc = 1-imidazole-1-yl-2,4,6-benzene-tricarboxylic acid), was synthesized using the solvothermal reaction. The single-crystal structure was determined by single X-ray diffraction analysis, and crystalline characteristics and composition were confirmed by powder X-ray diffraction (PXRD) and thermogravimetric analysis (TG), respectively. Structural analysis showed that the Cd²⁺ ion is in the seven-coordinated mode, in which ttc^2- ion adopts the μ₄-η¹-η¹-η²-η² coordination mode. It is worth noting that the Cd²⁺ ion is connected to ttc^2- to form a 2D network, and the adjacent 2D network is expanded into a 3D supramolecular network structure through weak hydrogen bonds. The fluorescence sensing experiments indicated that Cd-MOF could not only be used as a fluorescence sensor for Fe³⁺, fluazinam (FLU), and 2,4,6-trinitrophenolol (TNP) but also for sulfasalazine detection in aqueous solution. To verify the sensitivity of the fluorescent probe, we calculated its detection limit: 5.34 × 10^-8 M (Fe³⁺), 7.8 × 10^-8 M (FLU), 1.21 × 10^-7 M (TNP), and 2.67 × 10^-7 M (SECT). In addition, the quenching mechanism was thoroughly studied.

Interplay between Dual-State and Aggregation-Induced Emission with ESIPT Scaffolds Containing Triphenylamine Substituents: Experimental and Theoretical Studies

We detail the synthesis of a series of fluorophores containing triphenylamine derivatives along with their photophysical, electrochemical, and electronic structure properties. These compounds include molecular structures derived from imino-phenol (anil) and hydroxybenzoxazole scaffolds originating from similar salicylaldehyde derivatives and display excited-state intramolecular proton transfer. We show that depending on the nature of the π-conjugated scaffold, different photophysical processes are observed: aggregation-induced emission or dual-state emission, with a modulation of the fluorescence color and redox properties. The photophysical properties are further rationalized with the help of ab initio calculations.

ESIPT mechanism of triple emission with hydroxy-oxadiazole compound in DMSO: A theoretical reconsideration

The compound in solvents with triple fluorescence feature of excited state intramolecular proton transfer (ESIPT) has a broad prospect in fluorescent probes, dye sensors and molecular synthesis of photosensitive dyes. An ESIPT molecule hydroxy-bis-2,5-disubstituted-1,3,4-oxadiazoles (compound 1a) emits two fluorescence peaks in dichloromethane (DCM) and three fluorescence peaks in dimethyl sulfoxide (DMSO). [Dyes and Pigments 197 (2022) 109927]. Two longer peaks were attributed to enol and keto emission in both solvents and the shortest third peak in DMSO was just attributed simply. However, there is a significant difference in proton affinity between DCM and DMSO solvents which has influence on the position of emission peaks. Therefore, the correctness of this conclusion needs to be further verified. In this research, density functional theory and time-dependent density functional theory method are used to explore ESIPT process. Optimized structures indicate ESIPT occurs through molecular bridge assisted by DMSO. The calculated fluorescence spectra demonstrate two peaks indeed originated from enol and keto in DCM, while interestingly three peaks are originated from enol, keto and intermediate in DMSO. Infrared spectrum, electrostatic potential and potential energy curves further prove existence of three structures. We reveal the mechanisms that compound 1a molecule occurs ESIPT in DCM solvent and undergoes an ESIPT through assisted by DMSO molecular bridge. Additionally, three fluorescence peaks in DMSO are reattributed. Our work is expected to provide an insight for understanding intra- and intermolecular interactions and synthesis of efficient organic lighting-emitting molecule.

Intramolecular dual hydrogen bonded fluorescent "turn-on" probe for Al3+ and HSO4- ions: Applications in real water samples and molecular keypad lock

Dual hydrogen bonded Schiff base containing unsymmetrical double proton transfer sites, one with imine bond (CN) and hydroxyl group (OH), and the other with benzimidazole and hydroxyl groups has been successfully synthesized. Probe 1 displayed intramolecular charge transfer and acts as a potential sensor for Al³⁺ and HSO₄^- ions. Probe 1 displayed two absorption peaks at 325 nm and 340 nm and an emission band at 435 nm upon excitation at 340 nm. Probe 1 behaves as a fluorescence "turn-on" chemosensor for both Al³⁺ and HSO₄^- ions in H₂O-CH₃OH solvent system. The proposed method allows the determination of Al³⁺ and HSO₄^- ions up to 39 nM and 23 nM at emission wavelength 385 nm and 390 nm, respectively. The binding behavior of probe 1 towards these ions is determined by the Job's plot method and ¹H NMR titrations. Probe 1 is used to construct a molecular keypad lock where the absorbance channel can be opened only in the presence of the correct sequence. Further, it is used for the quantitative determination of HSO₄^- ion in different real-field water samples.

Magnifying the ESIPT process in tris(salicylideneanilines) via the steric effect - a pathway to the molecules with panchromatic fluorescence

Four tris(salicylideneanilines) (TSANs) with gradually increased steric interactions between the keto-enamine moiety and neighbouring phenyl substituent are presented. The steric interactions are induced by placing two alkyl groups at the ortho position in the N-aryl substituent. The impact of the steric effect over the radiative channels of deactivation of the excited state was evaluated through spectroscopic measurements and theoretical calculations using ab initio techniques. Our results show that the emission occurring after excited state intramolecular proton transfer (ESIPT) is favoured by placing the bulky groups in the ortho position of the N-phenyl ring of the TSAN. However, our TSANs seem to offer the opportunity to obtain a pronounced emission band at higher energy, significantly increasing the coverage of the visible spectrum, resulting in the enhancement of the dual emissive properties of tris(salicylideneanilines). Thus, TSANs may be promising molecules capable of white-like emission for use in organic electronic devices such as white OLEDs.

Photogrammetry of Ultrafast Excited-State Intramolecular Proton Transfer Pathways in the Fungal Pigment Draconin Red

Proton transfer processes of organic molecules are key to charge transport and photoprotection in biological systems. Among them, excited-state intramolecular proton transfer (ESIPT) reactions are characterized by quick and efficient charge transfer within a molecule, resulting in ultrafast proton motions. The ESIPT-facilitated interconversion between two tautomers (PS and PA) comprising the tree fungal pigment Draconin Red in solution was investigated using a combination of targeted femtosecond transient absorption (fs-TA) and excited-state femtosecond stimulated Raman spectroscopy (ES-FSRS) measurements. Transient intensity (population and polarizability) and frequency (structural and cooling) dynamics of -COH rocking and -C=C, -C=O stretching modes following directed stimulation of each tautomer elucidate the excitation-dependent relaxation pathways, particularly the bidirectional ESIPT progression out of the Franck-Condon region to the lower-lying excited state, of the intrinsically heterogeneous chromophore in dichloromethane solvent. A characteristic overall excited-state PS-to-PA transition on the picosecond timescale leads to a unique "W"-shaped excited-state Raman intensity pattern due to dynamic resonance enhancement with the Raman pump-probe pulse pair. The ability to utilize quantum mechanics calculations in conjunction with steady-state electronic absorption and emission spectra to induce disparate excited-state populations in an inhomogeneous mixture of similar tautomers has broad implications for the modeling of potential energy surfaces and delineation of reaction mechanisms in naturally occurring chromophores. Such fundamental insights afforded by in-depth analysis of ultrafast spectroscopic datasets are also beneficial for future development of sustainable materials and optoelectronics.

Julolidine based red emitting ESIPT/AIE active material showing luminescence beyond excimer emission: An "on-off" emission response to Cu2

A new julolidine-fluorene based excited state intramolecular proton transfer (ESIPT)/aggregate induced emission (AIE) active Schiff-base (JDF) has been synthesized and evaluated for its photophysical properties in solution and aggregated/solid states. The correlation between the emission behavior and the solid state crystal packing structure revealed the interplay of ESIPT coupled excimer reaction occurring in the solid state, which is one of the rare examples reported so far. For a comprehensive comparison, we synthesized a non-ESIPT methyl derivative (JDF-Me) of JDF capable of showing excimer emission only in the solid state. Further, JDF exhibits normal as well as keto emission in solution, upon addition of water, its poor solvent, that promotes aggregation, the fluorescence emission shows the preponderance of the excimer band in the low energy region. It was also interesting to note that in the solid state (thin films), JDF shows emission beyond the excimer emission, which is wavelength dependent. This is attributed to the formation of diverse clusters leading to the extended delocalization beyond excimers, and represents a clustering-triggered emission ascribing bright red color to the solid JDF. Such mélange of emission characteristics of JDF are responsible for the multicolor emission covering a broad range of electromagnetic spectrum, which is demonstrated by the confocal microscopy images of the JDF recorded in different states. Further, in its aggregated state, JDF recognized Cu²⁺ ions, selectively, manifested in the form of emission quenching via the interaction of Cu²⁺ ions with the oxygen and nitrogen atoms of JDF inhibiting the excimer formation.

Regulating the photophysical properties of ESIPT-based fluorescent probes by functional group substitution: a DFT/TDDFT study

CONTEXT

In recent years, fluorescent probe technology has received more and more attention. However, the photophysical and photochemical properties of probe molecules still need to be further explored. This paper presents the excited state intramolecular proton transfer (ESIPT) processes and photophysical properties of the probe molecule 4-bromo-2-((E)-((Z)-((5-bromo-1H-indol-2-yl) methylene) hydrazono) methyl) phenol (BHPL) and its four derivatives (BHPL2, BHPL3, BHPL4, and BHPL5). Infrared spectra and geometric structure analyses revealed that introducing the -NH₂ group on the benzene ring with the hydroxyl group will enhance the intramolecular hydrogen bond, which benefits the ESIPT process. Combining their absorption and fluorescence spectra, it can be concluded that BHPL2 and BHPL4 are both excellent probe candidates due to their large Stokes shift. The hole and electron and root mean square displacement analyses manifest that the fluorescence quenching of BHPL4 may be due to the intramolecular charge transfer process. Potential energy curves of BHPL and its four derivatives noted that ESIPT process of the BHPL2 is the most favorable to occur. The frontier molecular orbital and NBO analyses indicated that besides introducing electron-donating groups to reduce the energy gap and enhance fluorescence emission, introducing double electron-withdrawing groups can also achieve this effect, explaining why the energy barrier of ESIPT process for BHPL2 is lower than BHPL5. This work would provide the theoretical basis for designing novel fluorescence probes with more prominent properties.

METHODS

The ground (S₀) and excited (S₁) state structures of all compounds were optimized by density functional theory (DFT) and time-dependent (TDDFT) method, with B3LYP/6-311+G(d,p) level, respectively. The infrared spectra and potential energy curves were simulated at the same theoretical level. The reduced density gradient scatter plots and interaction region indicator isosurfaces were drawn using Multiwfn and VMD programs. The absorption and fluorescence spectra were simulated by the TDDFT/B3PW91/6-311+G(d,p) method. All the calculations in this work are carried out in Gaussian 16 program package.

ESIPT-, AIE-, and AIE + ESIPT-Based Light-Activated Drug Delivery Systems and Bioactive Donors for Targeted Disease Treatment

Targeted release of bioactive molecules for therapeutic purposes is a key area in the biomedical field that is growing quickly, where bioactive molecules are released passively or actively from drug delivery systems (DDSs) or bioactive donors. In the past decade, researchers have identified light as one of the prime stimuli that can implement the efficient spatiotemporally targeted delivery of drugs or gaseous molecules with minimal cytotoxicity and a real-time monitoring ability. This perspective emphasizes recent advances in the photophysical properties of ESIPT- (excited-state intramolecular proton transfer), AIE- (aggregation-induced emission), and AIE + ESIPT-attributed light-activated delivery systems or donors. The three major sections of this perspective describe the distinctive features of DDSs and donors concerning their design, synthesis, photophysical and photochemical properties, and in vitro and in vivo studies demonstrating their relevance as carrier molecules for releasing cancer drugs and gaseous molecules in the biological system.

Bioluminescence, photophysical, computational and molecular docking studies of fully conformationally restricted enamine infraluciferin

A new rationally designed fully rotationally restricted luciferin has been synthesised. This synthetic luciferin, based upon the structure of infraluciferin, has two intramolecular H-bonds to reduce degrees of freedom, an amine group to enhance ICT process, and an alkenyl group to increase π-conjugation. In the spectroscopic measurements and computational calculations, enamine luciferin showed more red-shifted absorption and fluorescence emission than LH₂ and iLH₂. With PpyWT luciferase enamine luciferin gave bioluminescence at 564 nm which is similar to LH₂ at 561 nm. Further investigation by docking studies revealed that the emission wavelength of enamine luciferin might be attributed to the unwanted twisted structure caused by Asp531 within the enzyme. With mutant luciferase FlucRed, the major emission peak was shifted to 606 nm, a distinct shoulder above 700 nm, and 21% of its spectrum located in the nIR range.

Heteroaryl-Substituted Bis-Anils: Aggregation-Induced Emission (AIE) Derivatives with Tunable ESIPT Emission Color and pH Sensitivity

The two-step synthesis, structural, and photophysical properties of a series of heteroaryl-substituted bis-anil derivatives presenting aggregation-induced emission (AIE) coupled with an excited-state intramolecular proton transfer (ESIPT) process is described. The fluorescence color of the aggregates can be fine tuned by changing the electronic nature of the peripheral substitution, leading to a wide range of emission wavelengths (from green to the near infra-red). Moreover, upon introduction of strong electron-withdrawing groups such as cyano (CN), a competition between ESIPT and deprotonation is observed leading to the emission of the anionic species at low water percentage. This observation led to the synthesis of an additional mixed AIE fluorophore, functionalized by methoxy groups on one side and cyano groups on the other side. Upon addition of water, this dye displays first anionic emission, followed by typical AIE/ESIPT red fluorescence upon formation of the aggregates. TD-DFT calculations on selected AIE dyes were performed to rationalize the nature of the emissive transitions in these derivatives.