Multicolored silver nanoparticles for multiplexed disease diagnostics: distinguishing dengue, yellow fever, and Ebola viruses

Photoluminescent biocomposite films of chitosan based on styrylbenzothiazolium-g-cellulose nanocrystal for anti-counterfeiting applications

In the present investigation, novel photoluminescent and transparent biocomposite films based on chitosan reinforced with styrylbenzothiazolium-g-cellulose nanocrystal for anti-counterfeiting applications were successfully prepared by casting solvent. Three novel styrylbenzothiazolium derivatives were synthesized by Knoevenagel condensation and characterized by FTIR, ¹H, ¹³C NMR and photoluminescence analysis. These photochromic compounds have been used to functionalize cellulose nanocrystal and the resulting fluorescent photonic materials were characterized by FTIR, ¹³C-CP/MAS NMR as well as photoluminescent analysis to confirm the successful grafting. It can be concluded that the addition of 5 wt% of fluorescent modified CNC to chitosan matrix increase the photoluminescent properties as well as improved the mechanical properties of the Cs/CNC-dye biocomposite films. These photoluminescent biocomposite film hold promising applicative value in anti-counterfeiting material in large-scale.

Development strategies of conducting polymer-based electrochemical biosensors for virus biomarkers: Potential for rapid COVID-19 detection

Rapid, accurate, portable, and large-scale diagnostic technologies for the detection of severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2) are crucial for controlling the coronavirus disease (COVID-19). The current standard technologies, i.e., reverse-transcription polymerase chain reaction, serological assays, and computed tomography (CT) exhibit practical limitations and challenges in case of massive and rapid testing. Biosensors, particularly electrochemical conducting polymer (CP)-based biosensors, are considered as potential alternatives owing to their large advantages such as high selectivity and sensitivity, rapid detection, low cost, simplicity, flexibility, long self-life, and ease of use. Therefore, CP-based biosensors can serve as multisensors, mobile biosensors, and wearable biosensors, facilitating the development of point-of-care (POC) systems and home-use biosensors for COVID-19 detection. However, the application of these biosensors for COVID-19 entails several challenges related to their degradation, low crystallinity, charge transport properties, and weak interaction with biomarkers. To overcome these problems, this study provides scientific evidence for the potential applications of CP-based electrochemical biosensors in COVID-19 detection based on their applications for the detection of various biomarkers such as DNA/RNA, proteins, whole viruses, and antigens. We then propose promising strategies for the development of CP-based electrochemical biosensors for COVID-19 detection.

Rapid Detection and One-Step Differentiation of Cross-Reactivity Between Zika and Dengue Virus Using Functional Magnetic Nanosensors

Infection with the Zika virus (ZIKV) is an ongoing problem especially as accurate, cost-effective testing remains unresolved. In addition, coinfection occurs with both the Dengue virus (DENV) and ZIKV which leads to cross-reactivity between the flaviviruses and can result in false positives and inaccurate testing. This supports the current need for a simple assay that can detect Zika antibodies sensitively that at the same time can differentiate between cross-reactive antibodies. In this study, we developed customizable magnetic relaxation nanosensors (MRnS) conjugated to various ligands, which included ZIKV (ZENV, zika domain III and NS1) and DENV proteins for specific detection of cross-reactive Zika and Dengue antibodies. Binding interactions between functional MRnS and corresponding targets resulted in the change in spin-spin magnetic relaxation time (T2MR) of water protons, allowing for a rapid and simple means by which these interactions were detected and quantified. Our results show the detection of Zika antibodies within minutes at concentrations as low as 20 nM and display high specificity, reproducibility, and analytical sensitivity. Furthermore, a mixture of functional MRnS was used for the one-step simultaneous detection and differentiation of Zika and Dengue infections. These results demonstrate high specificity and sensitivity for the detection of ZIKV and DENV despite coinfections in both simple and complex media. Overall, our magnetic nanoplatform could be used as a rapid and sensitive assay for the detection of not only Zika- and Dengue-related testing but can be further applied to serological samples of any other pathogens.

Ratiometric Fluorescent Lateral Flow Immunoassay for Point-of-Care Testing of Acute Myocardial Infarction

We report the development of a highly sensitive ratiometric fluorescent lateral flow immunoassay (RFLFIA) strip for rapid and accurate detection of acute myocardial infarction biomarker, namely heart-type fatty acid binding protein (H-FABP). The RFLFIA strip works in terms of ratiometric change of fluorescence signal, arising from blending of fluorescence emitted by two composite nanostructures conjugated to capture and probe antibodies and inner filter effect of gold nanoparticles. In conjunction with using custom smartphone-based analytical device and tonality analysis, quantitative detection of H-FABP was achieved with a low limit of detection at 0.21 ng mL^-1 . The RFLFIA strip can generate a visually distinguishable green-to-red color change around the threshold concentration of H-FABP (6.2 ng mL^-1 ), thus allowing the semi-quantitative diagnosis by the naked eye.

The Microbiome Meets Nanotechnology: Opportunities and Challenges in Developing New Diagnostic Devices

Monitoring of the human microbiome is an emerging area of diagnostics for personalized medicine. Here, the potential of different nanomaterials and nanobiosensing technologies is reviewed for the development of novel diagnostic devices for the detection and measurement of microbiome-related biomarkers. Moreover, the current and future landscape of microbiome-based diagnostics is defined by exploring the advantages and disadvantages of current nanotechnology-based approaches, especially in the context of developing point-of-care (PoC) devices that would meet the international guidelines known as REASSURED (Real-time connectivity; Ease of specimen collection; Affordability; Sensitivity; Specificity; User-friendliness; Rapid & robust operation; Equipment-free; and Deliverability). Finally, the strategies of the latest international scientific consortia working in this field are analyzed, the current microbiome diagnostics market are reported and the principal ethical, legal, and societal issues related to microbiome R&D and innovation are discussed.

16S rRNA Monitoring Point-of-Care Magnetic Focus Lateral Flow Sensor

The detection and profiling of pathogenic bacteria is critical for human health, environmental, and food safety monitoring. Herein, we propose a highly sensitive colorimetric strategy for naked eye screening of 16S ribosomal RNA (16S rRNA) from pathogenic agents relevant to infections, human health, and food safety monitoring with a magnetic focus lateral flow sensor (mLFS) platform. The method developed was demonstrated in model 16S rRNA sequences of the pathogen Escherichia coli O157:H7 to detect as low as 1 fM of targets, exhibiting a sensitivity improved by ∼5 × 10⁵ times compared to the conventional GNP-based colorimetric lateral flow assay used for oligonucleotide testing. Based on the grayscale values, semi-quantitation of up to 1 pM of target sequences was possible in ∼45 min. The methodology could detect the target 16S rRNA from as low as 32 pg/mL of total RNA extracted from pathogens. Specificity was demonstrated with total RNA extracted from E. coli K-12 MG1655, Bacillus subtilis (B. subtilis), and Pseudomonas aeruginosa (P. aeruginosa). No signal was observed from as high as 320 pg/mL of total RNA from the nontarget bacteria. The recognition of target 16S rRNA from 32 pg/mL of total RNA in complex matrices was also demonstrated. The proposed mLFS method was then extended to monitoring B. subtilis and P. aeruginosa. Our approach highlights the possibility of extending this concept to screen specific nucleic acid sequences for the monitoring of infectious pathogens or microbiome implicated in a range of diseases including cancer.

Paper-Based Biosensors: Frontiers in Point-of-Care Detection of COVID-19 Disease

This review summarizes the state of the art of paper-based biosensors (PBBs) for coronavirus disease 2019 (COVID-19) detection. Three categories of PBB are currently being been used for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) diagnostics, namely for viral gene, viral antigen and antibody detection. The characteristics, the analytical performance, the advantages and drawbacks of each type of biosensor are highlighted and compared with traditional methods. It is hoped that this review will be useful for scientists for the development of novel PBB platforms with enhanced performance for helping to contain the COVID-19 outbreak, by allowing early diagnosis at the point of care (POC).

Optical Biosensors for Virus Detection: Prospects for SARS-CoV-2/COVID-19

The recent pandemic of the novel coronavirus disease 2019 (COVID-19) has caused huge worldwide disruption due to the lack of available testing locations and equipment. The use of optical techniques for viral detection has flourished in the past 15 years, providing more reliable, inexpensive, and accurate detection methods. In the current minireview, optical phenomena including fluorescence, surface plasmons, surface-enhanced Raman scattering (SERS), and colorimetry are discussed in the context of detecting virus pathogens. The sensitivity of a viral detection method can be dramatically improved by using materials that exhibit surface plasmons or SERS, but often this requires advanced instrumentation for detection. Although fluorescence and colorimetry lack high sensitivity, they show promise as point-of-care diagnostics because of their relatively less complicated instrumentation, ease of use, lower costs, and the fact that they do not require nucleic acid amplification. The advantages and disadvantages of each optical detection method are presented, and prospects for applying optical biosensors in COVID-19 detection are discussed.

Nanotechnology as a tool for detection and treatment of arbovirus infections

Arboviruses are medically important viruses that cause high rates of infection all over the world. In addition, the severity of the symptoms and the inadequate diagnostic methods represent a challenge far beyond eradicating the vector. The lack of specific treatments for arbovirus infections reflects the imminent need for new research for safe and efficient medicines to treat these infections. Nanotechnology is an innovative approach currently used as a platform for developing new treatments, thus improving the biopharmaceutical properties of drugs. It can also be applied to the development of diagnostic devices, improving their detection capacity. The purpose of this paper is to review recent research on the use of nanotechnology for developing new treatments and detection devices for arbovirus infections. Interestingly, it was found that only a few studies report on the use of nanotechnology to treat arbovirus infections and that most of these reports focus on the fabrication of diagnostic tools. Also, some papers report on the use of nanotechnology for the development of vaccines, which in association with mosquito eradication programs could effectively reduce the high rates of infections by these viruses.

The electrochemical detection of bioterrorism agents: a review of the detection, diagnostics, and implementation of sensors in biosafety programs for Class A bioweapons

During the past year, disease has shown us the iron grip it can hold over a population of people. Health systems can be overwhelmed, economies can be brought into recession, and many people can be harmed or killed. When weaponized, diseases can be manipulated to create a detriment to health while becoming an economic burden on any society. It is consequently prudent that easy detection of bioweapons is available to governments for protecting their people. Electrochemical sensing displays many distinct advantages, such as its low limit of detection, low cost to run, rapid generation of results, and in many instances portability. We therefore present a wide array of electrochemical sensing platforms currently being fabricated, a brief summary of Class A bioweapons, and the potential future of bioweapon detection and biosafety.

Internet of medical things (IoMT)-integrated biosensors for point-of-care testing of infectious diseases

On global scale, the current situation of pandemic is symptomatic of increased incidences of contagious diseases caused by pathogens. The faster spread of these diseases, in a moderately short timeframe, is threatening the overall population wellbeing and conceivably the economy. The inadequacy of conventional diagnostic tools in terms of time consuming and complex laboratory-based diagnosis process is a major challenge to medical care. In present era, the development of point-of-care testing (POCT) is in demand for fast detection of infectious diseases along with “on-site” results that are helpful in timely and early action for better treatment. In addition, POCT devices also play a crucial role in preventing the transmission of infectious diseases by offering real-time testing and lab quality microbial diagnosis within minutes. Timely diagnosis and further treatment optimization facilitate the containment of outbreaks of infectious diseases. Presently, efforts are being made to support such POCT by the technological development in the field of internet of medical things (IoMT). The IoMT offers wireless-based operation and connectivity of POCT devices with health expert and medical centre. In this review, the recently developed POC diagnostics integrated or future possibilities of integration with IoMT are discussed with focus on emerging and re-emerging infectious diseases like malaria, dengue fever, influenza A (H1N1), human papilloma virus (HPV), Ebola virus disease (EVD), Zika virus (ZIKV), and coronavirus (COVID-19). The IoMT-assisted POCT systems are capable enough to fill the gap between bioinformatics generation, big rapid analytics, and clinical validation. An optimized IoMT-assisted POCT will be useful in understanding the diseases progression, treatment decision, and evaluation of efficacy of prescribed therapy.

Simplified formats of modern biosensors: 60 years of using immunochromatographic test systems in laboratory diagnostics

Immunochromatographic test systems known to foreign laboratory diagnostic experts as lateral flow immunoassay (LFIA) are simplified tape formats of modern biosensors. For 60 years, they have been widely used for the rapid detection of target molecules (ligands) in biosubstrates and the diagnosis of many diseases and conditions. The growing popularity of these test systems for providing medical care or diagnostics in developing countries, medical facilities, in emergency situations, as well as for individual home use by patients while monitoring their health are the main factors contributing to the continuous development and improvement of these methods, the emergence of a new generation of formats. The attractiveness and popularity of these fast, easy-to-use, inexpensive and portable diagnostic tools is associated primarily with their high analytical sensitivity and specificity, as well as the ease of interpretation of the results. These qualities have passed the test of time, and today LFIA test systems are fully consistent with the modern world concept of «point-of-care testing», finding wide application not only in medicine, but also in ecology, veterinary medicine, and agriculture. This review will highlight the modern principles of designing the most widely used formats of immunochromatographic test systems for clinical laboratory diagnostics, summarize the main advantages and disadvantages of the method, as well as current achievements and prospects of LFIA technology. Modern innovations aimed at improving the analytical characteristics of LFIA technology are interesting, promising and can bring additional benefits to immunochromatographic platforms that have gained popularity and attractiveness for six decades.

Multidrug resistant tuberculosis - Diagnostic challenges and its conquering by nanotechnology approach - An overview

One of the leading killer diseases that target the parenchymal tissues of lungs is Tuberculosis. Although antimycobacterial drugs are available, there are increased incidences of drug resistance encountered in Mycobacterium sp. They have been categorized into MDR (Multidrug resistant) and XDR (Extensively drug-resistant) strains exhibiting resistance toward successive treatment regimen. This situation threatens the futuristic containment of TB with the dearth of anti-TB drugs. Nanotechnology, the emerging multidisciplinary science has presented an excellent opportunity for timely and accurate diagnosis and discrimination of Mycobacteria via its unique physio-chemical and optical characteristics. The delayed and misdiagnosis of TB and lack of sensitive diagnostic method(s) has seen a paradigm shift toward nanoparticulate system for improved diagnosis, drug delivery and reduced treatment frequency. This review article highlights the evolution of tuberculosis and its transformation to multidrug resistant strain. Further, the conventional methods for diagnosing TB and the challenges encountered in their analytical performance have been highlighted and the strategies to overcome those challenges have been briefly discussed. Smart approaches encompassing metal nanoparticles, Quantum Dots (QDs) and Field Effect Transistors (FET) based biosensor for accurate diagnosis have been critically reviewed. A decade long state-of-the-art knowledge on TB nanodiagnostics, fabrication concepts and performance characteristics has been reviewed.

An Insight into Nanomedicinal Approaches to Combat Viral Zoonoses

BACKGROUND

Emerging viral zoonotic diseases are one of the major obstacles to secure the "One Health" concept under the current scenario. Current prophylactic, diagnostic and therapeutic approaches often associated with certain limitations and thus proved to be insufficient for customizing rapid and efficient combating strategy against the highly transmissible pathogenic infectious agents leading to the disastrous socio-economic outcome. Moreover, most of the viral zoonoses originate from the wildlife and poor knowledge about the global virome database renders it difficult to predict future outbreaks. Thus, alternative management strategy in terms of improved prophylactic vaccines and their delivery systems; rapid and efficient diagnostics and effective targeted therapeutics are the need of the hour.

METHODS

Structured literature search has been performed with specific keywords in bibliographic databases for the accumulation of information regarding current nanomedicine interventions along with standard books for basic virology inputs.

RESULTS

Multi-arrayed applications of nanomedicine have proved to be an effective alternative in all the aspects regarding the prevention, diagnosis, and control of zoonotic viral diseases. The current review is focused to outline the applications of nanomaterials as anti-viral vaccines or vaccine/drug delivery systems, diagnostics and directly acting therapeutic agents in combating the important zoonotic viral diseases in the recent scenario along with their potential benefits, challenges and prospects to design successful control strategies.

CONCLUSION

This review provides significant introspection towards the multi-arrayed applications of nanomedicine to combat several important zoonotic viral diseases.

Duplex-specific nuclease signal amplification-based fluorescent lateral flow assay for the point-of-care detection of microRNAs

MiRNAs play important regulatory roles in numerous biological processes and serve as significant biomarkers for the development and prognosis of several diseases. Their unique characteristics, such as short size, high sequence homology among family members, low abundance, and easy degradability, have hindered their specific and highly sensitive detection. Herein, a duplex-specific nuclease (DSN)-assisted target recycling signal amplification-based fluorescent lateral flow assay was demonstrated for the point-of-care detection of cancer-related miRNA-21. In this assay, digoxin/biotin-labeled DNA probes were selectively cleaved by the DSN enzyme in the rounds of hybridization with the miRNA-21 target and cleavage cycle. Subsequently, the resulting mixture, containing the miRNA-21 target and intact and cleaved DNA probes, was loaded onto the lateral flow strip with digoxin antibody-conjugated quantum dot nanobeads and the streptavidin-coated test line. The increase in the proportion of cleaved DNA probes can induce a weakened response signal, which is directly associated with the amount of the miRNA target. Thus, highly sensitive quantification of miRNA-21 was achieved at a low limit of detection of 0.16 pM within 2 h of assay time. Assay specificity toward miRNA-21 was validated by testing several other miRNAs, including let-7b, let-7d, miRNA-141, and miRNA-200a. Moreover, the assay can quantify miRNA-21 spiked in human serum samples with acceptable recovery values, thus indicating its considerable clinical feasibility.

Colorimetric loop-mediated isothermal amplification (LAMP) for cost-effective and quantitative detection of SARS-CoV-2: the change in color in LAMP-based assays quantitatively correlates with viral copy number

We demonstrate a loop-mediated isothermal amplification (LAMP) method to detect and amplify SARS-CoV-2 genetic sequences using a set of in-house designed initiators that target regions encoding the N protein. We were able to detect and amplify SARS-CoV-2 nucleic acids in the range of 62 to 2 × 105 DNA copies by this straightforward method. Using synthetic SARS-CoV-2 samples and RNA extracts from patients, we demonstrate that colorimetric LAMP is a quantitative method comparable in diagnostic performance to RT-qPCR (i.e., sensitivity of 92.85% and specificity of 81.25% in a set of 44 RNA extracts from patients analyzed in a hospital setting).

Microfluidic Point-of-Care Testing: Commercial Landscape and Future Directions

Point-of-care testing (POCT) allows physicians to detect and diagnose diseases at or near the patient site, faster than conventional lab-based testing. The importance of POCT is considerably amplified in the trying times of the COVID-19 pandemic. Numerous point-of-care tests and diagnostic devices are available in the market including, but not limited to, glucose monitoring, pregnancy and infertility testing, infectious disease testing, cholesterol testing and cardiac markers. Integrating microfluidics in POCT allows fluid manipulation and detection in a singular device with minimal sample requirements. This review presents an overview of two technologies - (a.) Lateral Flow Assay (LFA) and (b.) Nucleic Acid Amplification - upon which a large chunk of microfluidic POCT diagnostics is based, some of their applications, and commercially available products. Apart from this, we also delve into other microfluidic-based diagnostics that currently dominate the in-vitro diagnostic (IVD) market, current testing landscape for COVID-19 and prospects of microfluidics in next generation diagnostics.

A comprehensive review on plasmonic-based biosensors used in viral diagnostics

The proliferation and transmission of viruses has become a threat to worldwide biosecurity, as exemplified by the current COVID-19 pandemic. Early diagnosis of viral infection and disease control have always been critical. Virus detection can be achieved based on various plasmonic phenomena, including propagating surface plasmon resonance (SPR), localized SPR, surface-enhanced Raman scattering, surface-enhanced fluorescence and surface-enhanced infrared absorption spectroscopy. The present review covers all available information on plasmonic-based virus detection, and collected data on these sensors based on several parameters. These data will assist the audience in advancing research and development of a new generation of versatile virus biosensors.

Therapeutic strategies and potential implications of silver nanoparticles in the management of skin cancer

Skin cancer (SC) is the most common carcinoma affecting 3 million people annually in the United States and millions of people worldwide. It is classified as melanoma SC (MSC) and non-melanoma SC (NMSC). NMSC represents approximately 80% of SC and includes squamous cell carcinoma and basal cell carcinoma. MSC, however, has a higher mortality rate than SC because of its ability to metastasize. SC is a major health problem in the United States with significant morbidity and mortality in the Caucasian population. Treatment options for SC include cryotherapy, excisional surgery, Mohs surgery, curettage and electrodessication, radiation therapy, photodynamic therapy, immunotherapy, and chemotherapy. Treatment is chosen based on the type of SC and the potential for side effects. Novel targeted therapies are being used with increased frequency for large tumors and for metastatic disease. A scoping literature search on PubMed, Google Scholar, and Cancer Registry websites revealed that traditional chemotherapeutic drugs have little effect against SC after the cancer has metastasized. Following an overview of SC biology, epidemiology, and treatment options, this review focuses on the mechanisms of advanced technologies that use silver nanoparticles in SC treatment regimens.

Ferritin as a Platform for Creating Antiviral Mosaic Nanocages: Prospects for Treating COVID-19

Infectious diseases are a continues threat to human health and the economy worldwide. The latest example is the global pandemic of COVID-19 caused by SARS-CoV-2. Antibody therapy and vaccines are promising approaches to treat the disease; however, they have bottlenecks: they might have low efficacy or narrow breadth due to the continuous emergence of new strains of the virus or antibodies could cause antibody-dependent enhancement (ADE) of infection. To address these bottlenecks, I propose the use of 24-meric ferritin for the synthesis of mosaic nanocages to deliver a cocktail of antibodies or nanobodies alone or in combination with another therapeutic, like a nucleotide analogue, to mimic the viral entry process and deceive the virus, or to develop mosaic vaccines. I argue that available data showing the effectiveness of ferritin-antibody conjugates in targeting specific cells and ferritin-haemagglutinin nanocages in developing influenza vaccines strongly support my proposals.

Switching from Multiplex to Multimodal Colorimetric Lateral Flow Immunosensor

Multiplex lateral flow immunoassay (LFIA) is largely used for point-of-care testing to detect different pathogens or biomarkers in a single device. The increasing demand for multitargeting diagnostics requires multi-informative single tests. In this study, we demonstrated three strategies to upgrade standard multiplex LFIA to multimodal capacity. As a proof-of-concept, we applied the strategies to the differential diagnosis of Human Immunodeficiency Virus (HIV) infection, a widespread pathogen, for which conventional multiplex LFIA testing is well-established. In the new two-parameter LFIA (x2LFIA), we exploited color encoding, in which the binding of multiple targets occurs in one reactive band and the color of the probe reveals which one is present in the sample. By combining the sequential alignment of several reactive zones along the membrane of the LFIA strip and gold nanoparticles and gold nanostars for the differential visualization, in this demonstration, the x2LFIA can furnish information on HIV serotype and stage of infection in a single device. Three immunosensors were designed. The use of bioreagents as the capturing ligand anchored onto the membrane or as the detection ligand labelled with gold nanomaterials affected the performance of the x2LFIA. Higher detectability was achieved by the format involving the HIV-specific antigens as capturing agent and labelled secondary bioligands (anti-human immunoglobulins M and protein G) as the probes.

DFC, Medina E, Sinche F, Santiago Vispo N, Dahoumane SA, Alexis F. Biomedical Science to Tackle the COVID-19 Pandemic: Current Status and Future Perspectives

The coronavirus infectious disease (COVID-19) pandemic emerged at the end of 2019, and was caused by the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), which has resulted in an unprecedented health and economic crisis worldwide. One key aspect, compared to other recent pandemics, is the level of urgency, which has started a race for finding adequate answers. Solutions for efficient prevention approaches, rapid, reliable, and high throughput diagnostics, monitoring, and safe therapies are needed. Research across the world has been directed to fight against COVID-19. Biomedical science has been presented as a possible area for combating the SARS-CoV-2 virus due to the unique challenges raised by the pandemic, as reported by epidemiologists, immunologists, and medical doctors, including COVID-19's survival, symptoms, protein surface composition, and infection mechanisms. While the current knowledge about the SARS-CoV-2 virus is still limited, various (old and new) biomedical approaches have been developed and tested. Here, we review the current status and future perspectives of biomedical science in the context of COVID-19, including nanotechnology, prevention through vaccine engineering, diagnostic, monitoring, and therapy. This review is aimed at discussing the current impact of biomedical science in healthcare for the management of COVID-19, as well as some challenges to be addressed.

Diagnostic methods and potential portable biosensors for coronavirus disease 2019

Timely detection and diagnosis are urgently needed to guide epidemiological measures, infection control, antiviral treatment, and vaccine research. In this review, biomarkers/indicators for diagnosis of coronavirus disease 2019 (COVID-19) or detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in the environment are summarized and discussed. It is concluded that the detection methods targeting antibodies are not suitable for screening of early and asymptomatic cases since most patients had an antibody response at about 10 days after onset of symptoms. However, antibody detection methods can be combined with quantitative real-time reverse transcriptase-polymerase chain reaction (RT-qPCR) to significantly improve the sensitivity and specificity of diagnosis, and boost vaccine research. Fast, sensitive and accurate detection methods targeting antigens need to be developed urgently. Various specimens for diagnosis or detection are compared and analyzed. Among them, deep throat saliva and induced sputum are desired for RT-qPCR test or other early detection technologies. Chest computerized tomography (CT) scan, RT-qPCR, lateral flow immunochromatographic strip (LFICS) for diagnosis of COVID-19 are summarized and compared. Specially, potential electrochemical (EC) biosensor, surface enhanced Raman scattering (SERS)-based biosensor, field-effect transistor (FET)-based biosensor, surface plasmon resonance (SPR)-based biosensor and artificial intelligence (AI) assisted diagnosis of COVID-19 are emphasized. Finally, some commercialized portable detection device, current challenges and future directions are discussed.

Nanomaterial-mediated paper-based biosensors for colorimetric pathogen detection

The pervasive spread of infectious diseases and pandemics, such as the 2019 coronavirus disease (COVID-19), are becoming increasingly serious and urgent threats to human health. Preventing the spread of such diseases prioritizes the development of sensing devices that can rapidly, selectively, and reliably detect pathogens at minimal cost. Paper-based analytical devices (PADs) are promising tools that satisfy those criteria. Numerous paper-based biosensors have been established that rival conventional pathogen detection methods. Among them, colorimetric strategies are promising since results can be interpreted by eye, and are simple to operate, which is advantageous for point-of-care testing (POCT). Particularly, the application of nanomaterials on paper-based biosensors has become important as these materials are capable of converting signals from pathogens through unique mechanisms to yield an amplified colorimetric readout. To highlight the research progress on using nanomaterials in colorimetric paper-based biosensor for pathogen detection, we discuss the sensing mechanisms of how they work, structural and analytical characteristics of the devices, and representative recent applications. Current challenges and future directions of using PADs and nanomaterial-mediated strategies are also discussed.

Quantitative and simultaneous detection of two inflammation biomarkers via a fluorescent lateral flow immunoassay using dual-color SiO2@QD nanotags

An on-site detection strategy is reported based on dual-color SiO₂@quantum dot (QD)-integrated lateral flow immunoassay (LFA) strip to realize the quantitative and simultaneous detection of C-reactive protein (CRP) and procalcitonin (PCT) in serum. The dual-color SiO₂@QD nanotags with monodispersity and excellent luminescence were synthesized using polyethyleneimine-mediated electrostatic adsorption of dense red CdSe/ZnS-COOH (excitation/emission 365/625 nm) or green CdSe/ZnS-COOH (excitation/emission 365/525 nm) QDs on the surface of 180 nm SiO₂ spheres and were conjugated with anti-PCT and anti-CRP monoclonal antibodies, as stable and fluorescent-enhanced QD nanotags in the LFA system. The use of SiO₂@QDs with two different fluorescent signals caused the sensitivity and specificity of the multiplex LFA system. As a result, the proposed assay provided a wide logarithmic determination range with a CRP quantitative range of 0.5-10³ ng/mL and PCT quantitative range of 0.05-10³ ng/mL. The limits of detection (LODs) of CRP and PCT reached 0.5 and 0.05 ng/mL, respectively. The SiO₂@QD-based LFA showed great potential as rapid detection tool for the simultaneous monitoring of CRP and PCT in serum sample.

Duplex Shiny app quantification of the sepsis biomarkers C-reactive protein and interleukin-6 in a fast quantum dot labeled lateral flow assay

Fast point-of-care (POC) diagnostics represent an unmet medical need and include applications such as lateral flow assays (LFAs) for the diagnosis of sepsis and consequences of cytokine storms and for the treatment of COVID-19 and other systemic, inflammatory events not caused by infection. Because of the complex pathophysiology of sepsis, multiple biomarkers must be analyzed to compensate for the low sensitivity and specificity of single biomarker targets. Conventional LFAs, such as gold nanoparticle dyed assays, are limited to approximately five targets-the maximum number of test lines on an assay. To increase the information obtainable from each test line, we combined green and red emitting quantum dots (QDs) as labels for C-reactive protein (CRP) and interleukin-6 (IL-6) antibodies in an optical duplex immunoassay. CdSe-QDs with sharp and tunable emission bands were used to simultaneously quantify CRP and IL-6 in a single test line, by using a single UV-light source and two suitable emission filters for readout through a widely available BioImager device. For image and data processing, a customized software tool, the MultiFlow-Shiny app was used to accelerate and simplify the readout process. The app software provides advanced tools for image processing, including assisted extraction of line intensities, advanced background correction and an easy workflow for creation and handling of experimental data in quantitative LFAs. The results generated with our MultiFlow-Shiny app were superior to those generated with the popular software ImageJ and resulted in lower detection limits. Our assay is applicable for detecting clinically relevant ranges of both target proteins and therefore may serve as a powerful tool for POC diagnosis of inflammation and infectious events.

Advanced "lab-on-a-chip" to detect viruses - Current challenges and future perspectives

Massive viral outbreaks draw attention to viruses that have not been thoroughly studied or understood. In recent decades, microfluidic chips, known as "lab-on-a-chip", appears as a promising tool for the detection of viruses. Here, we review the development of microfluidic chips that could be used in response to viral detection, specifically for viruses involved in more recent outbreaks. The advantages as well as the disadvantages of microfluidic systems are discussed and analyzed. We also propose ideas for future development of these microfluidic chips and we expect this advanced technology to be used in the future for viral outbreaks.

Six decades of lateral flow immunoassay: from determining metabolic markers to diagnosing COVID-19

Technologies based on lateral flow immunoassay (LFIA), known in some countries of the world as immunochromatographic tests, have been successfully used for the last six decades in diagnostics of many diseases and conditions as they allow rapid detection of molecular ligands in biosubstrates. The popularity of these diagnostic platforms is constantly increasing in healthcare facilities, particularly those facing limited budgets and time, as well as in household use for individual health monitoring. The advantages of these low-cost devices over modern laboratory-based analyzers come from their availability, opportunity of rapid detection, and ease of use. The attractiveness of these portable diagnostic tools is associated primarily with their high analytical sensitivity and specificity, as well as with the easy visual readout of results. These qualities explain the growing popularity of LFIA in developing countries, when applied at small hospitals, in emergency situations where screening and monitoring health condition is crucially important, and as well as for self-testing of patients. These tools have passed the test of time, and now LFIA test systems are fully consistent with the world's modern concept of ‘point-of-care testing’, finding a wide range of applications not only in human medicine, but also in ecology, veterinary medicine, and agriculture. The extensive opportunities provided by LFIA contribute to the continuous development and improvement of this technology and to the creation of new-generation formats. This review will highlight the modern principles of design of the most widely used formats of test-systems for clinical laboratory diagnostics, summarize the main advantages and disadvantages of the method, as well as the current achievements and prospects of the LFIA technology. The latest innovations are aimed at improving the analytical performance of LFIA platforms for the diagnosis of bacterial and viral infections, including COVID-19.

A magnetic immunoconjugate nanoplatform for easy colorimetric detection of the NS1 protein of dengue virus in infected serum

In this work, as a proof of principle, the design and performance evaluation of a simple, cheap and efficient colorimetric test for the detection of the NS1 protein of dengue virus, assisted by an immunoconjugate of magnetite (Fe₃O₄) nanoparticles coupled to anti-NS1 antibodies is reported. A monoclonal antibody against the NS1 antigen was covalently immobilized on the surface of superparamagnetic iron oxide nanoparticles (SPIONs ∼ 20 nm) and used for the immunodetection of this protein. When the magnetic immuno-nanoplatform is added into infected serum, it conjugates with the NS1 protein and can then be easily separated using an external magnetic field; then, the recovered immunoconjugate is transferred into a well containing a second immobilized NS1-antibody to form an ELISA-type system. When the NS1 protein is present, a color change to blue is induced by reaction with the Perls reagent, which is consistent with the formation of a SPION-antibody-NS1 antigen-antibody conjugate that confirms infection. No false positives were found when NS1 was not present or a different antibody and the NS1 protein were added into the system. The experimental findings could be extrapolated and scaled up to lead to future developments of simple, quick, and inexpensive, in situ biomolecular diagnostic tests for emergent viral infections.

Repurposing Old Antibodies for New Diseases by Exploiting Cross-Reactivity and Multicolored Nanoparticles

We exploit the cross-reactivity of dengue (DENV) and Zika (ZIKV) virus polyclonal antibodies for nonstructural protein 1 (NS1) to construct a selective sensor that can detect yellow fever virus (YFV) NS1 in a manner similar to chemical olfaction. DENV and ZIKV antibodies were screened for their ability to bind to DENV, ZIKV, and YFV NS1 by enzyme linked immunosorbent assay (ELISA) and in pairs in paper immunoassays. A strategic arrangement of antibodies immobilized on paper and conjugated to different colored gold NPs was used to distinguish the three biomarkers. Machine learning of test area RGB values showed that with two spots, readout accuracies of 100% and 87% were obtained for both pure NS1 and DENV/YFV mixtures, respectively. Additional image preprocessing allowed differentiation between all four DENV serotypes with 92% accuracy. The technique was extended to hack a commercial DENV test to detect YFV and ZIKV by augmentation with DENV and ZIKV polyclonal antibodies.

Optimization of paper-based nanoparticle immunoassays for direct detection of the bacterial pathogen V. parahaemolyticus in oyster hemolymph

The detection of foodborne pathogens is critical for disease control and infection prevention, especially in seafood consumed raw or undercooked. Paper-based diagnostic tools are promising for rapid fieldable detection and provide a readout by eye due to the use of gold nanoparticle immunoprobes. Here we study different strategies to overcome these challenges in a real biological matrix, oyster hemolymph, for the detection of the pathogenic bacteria Vibrio parahaemolyticus (Vp). Nanoparticle surface chemistry, nitrocellulose speed and blocking, running steps, and antibody concentrations on the NP and nitrocellulose were all studied. Their effect on paper immunoassay signal intensity was quantified to determine optimal conditions, which enabled the detection of Vp directly from hemolymph below pathogenic concentrations.

Point-of-Care Devices to Detect Zika and Other Emerging Viruses

Rapid diagnostic tests (point-of-care devices) are critical components of informed patient care and public health monitoring (surveillance applications). We propose that among the many rapid diagnostics platforms that have been tested or are in development, lateral flow immunoassays and synthetic biology–based diagnostics (including CRISPR-based diagnostics) represent the best overall options given their ease of use, scalability for manufacturing, sensitivity, and specificity. This review describes the identification of lateral flow immunoassay monoclonal antibody pairs that detect and distinguish between closely related pathogens and that are used in combination with functionalized multicolored nanoparticles and computational methods to deconvolute data. We also highlight the promise of synthetic biology–based diagnostic tests, which use synthetic genetic circuits that activate upon recognition of a pathogen-associated nucleic acid sequence, and discuss how the combined or parallel use of lateral flow immunoassays and synthetic biology tools may represent the future of scalable rapid diagnostics.

Capture-Layer Lateral Flow Immunoassay: A New Platform Validated in the Detection and Quantification of Dengue NS1

The lateral flow immunoassay (LFIA) is the most successful point-of-care testing (POCT) method to date. In the case of clinical biomarkers that require quantification, it remains a challenge to quantitate those biomarkers using the lateral flow immunoassay remains a challenge due to the cost of the reader and possibly the type of marker used. In the present work, a new concept of a platform LFIA device configuration is proposed in which different, aligned membrane components, some already existing in the classical lateral flow immunoassay, and the others created with special new functions in the present device. As the sample containing the target analyte passes through the aforementioned membranes, the target analyte will initially interact with a target-specific antibody-conjugated to horseradish peroxidase (HRP). Thereafter, the newly formed immunocomplex will diffuse through a proprietary capture membrane (that ensures that the nontarget-bound antibodies do not continue further and thus remain "captured" to that specific area). This is done by having the target molecules (or components thereof) immobilized onto the said capture layer. The target-bound immunocomplexes will then be allowed by the system configuration to continue further to the last layer, where the signal will be generated and quantified. Thus, in the absence of the target analyte in the sample, the free antibodies will be filtered at the capture layer by preimmobilized analyte molecules, thus preventing a false positive signal to occur. We validated the concept in the detection of dengue NS1 protein in view of making a triage test. The sample containing NS1 will first meet HRP-conjugated NS1-specific antibodies and become attached, thus producing an NS1-specific antibody-HRP immunocomplex. The sample then flows through the blocking layer, where the immunocomplex is unchallenged and thus allowed to reach the last "absorbent" pad, incorporating the substrate for the HRP marker. In the case of a positive test, a signal is generated, that is proportional to the amount of immunocomplexes (and therefore the NS1 concentration), and then analyzed and measured at the absorbent pad. Any unbound anti-NS1 antibody will be stopped at the blocking matrix by preimmobilized NS1, so there will be no false positive. As this study is the initial study of a novel configuration, much of the work comprised of optimization steps, such as determining the required NS1 membrane-immobilization concentration and the required target-specific capture antibody concentration. Our immunoassay was tested with spiked buffer and serum samples to mimic the clinical conditions, with a range of NS1 concentrations, and was found, at this time, to be fivefold more sensitive than a gold standard enzyme-linked immunosorbent assay (ELISA) test (5 ng mL^-1) performed in our laboratory. This method shows another form of LFIA that has the potential to be quantitative (at least semiquantitative), albeit not solving the reader cost; however, unlike the regular LFIA, we do not use nanobeads but instead enzymes, allowing, in theory, greater sensitivity, while retaining the one-step procedure. The test is accurate and has low production costs.

Silver nanoprism-based plasmonic ELISA for sensitive detection of fluoroquinolones

Fluoroquinolones are synthetic antibiotics that are commonly used in animal husbandry, and the consumption of animal products with fluoroquinolone residues has imposed a serious threat to human health. Here, we report a plasmonic enzyme-linked immunosorbent assay (pELISA) method based on oxidative etching of silver nanoprisms (AgNPRs) for the quantitative and qualitative detection of danofloxacin (DAN), a fluoroquinolone antibiotic. AgNPRs that undergo colorimetric changes upon oxidative etching by H2O2 serve as the signal transducer in our design. An indirect competitive pELISA was constructed by introducing biotinylated monoclonal antibody (mAb), streptavidin and biotinylated glucose oxidase, which catalyzes the generation of H2O2 for etching AgNPRs. The quantitative detection limit of the proposed method was 0.24 ng mL-1 for DAN. The qualitative detection limit for DAN reached 0.32 ng mL-1, which was 32-fold lower than that of the assay using 3,3',5,5'-tetramethylbenzidine (TMB) as the signal transducer. The average recoveries of DAN in milk ranged from 103% to 121%, with a coefficient of variation of 0.6-3.41%. The recovery results were further confirmed using liquid chromatography-tandem mass spectrometry. In summary, the proposed AgNPR-etching pELISA exhibits high sensitivity, good accuracy and excellent reliability for the quantitative and qualitative detection of DAN in milk.

Dengue NS1 detection in pediatric serum using microfluidic paper-based analytical devices

The diagnosis of dengue infection is still a critical factor determining success in the clinical management and treatment of patients. Here, the development of microfluidic paper-based analytical devices (μPADs) utilizing a sandwich immunoassay on wax patterned paper functionalized with anti-dengue NS1 monoclonal antibodies for point-of-care detection of dengue NS1 (DEN-NS1-PAD) is reported. Various assay conditions, including the length of the channel and diluent, were optimized, and the response detected by the naked eye and digitized images within 20-30 min. The DEN-NS1-PAD was successfully tested in the field for detecting dengue NS1 in buffer, cell culture media, and human serum. The limit of detection (LoD) of the DEN-NS1-PAD obtained with the naked eye, scanner, and a smartphone camera was 200, 46.7, and 74.8 ng mL^-1, respectively. The repeatability, reproducibility, and stability of the DEN-NS1-PAD were also evaluated. High true specificity and sensitivity in the serum of pediatric patients were observed. These evaluation results confirm that the DEN-NS1-PAD can potentially be used in point-of-care dengue diagnostics, which can significantly impact on the spreading of mosquito-borne diseases, which are likely to become more prevalent with the effects of global warming. Graphical Abstract.

Recent Developments in Nanotechnology for Detection and Control of Aedes aegypti-Borne Diseases

Arboviruses such as yellow fever, dengue, chikungunya and zika are transmitted mainly by the mosquito vector Aedes aegypti. Especially in the tropics, inefficacy of mosquito control causes arboviruses outbreaks every year, affecting the general population with debilitating effects in infected individuals. Several strategies have been tried to control the proliferation of A. aegypti using physical, biological, and chemical control measures. Other methods are currently under research and development, amongst which the use of nanotechnology has attracted a lot of attention of the researchers in relation to the production of more effective repellents and larvicides with less toxicity, and development of rapid sensors for the detection of virus infections. In this review, the utilization of nano-based formulations on control and diagnosis of mosquito-borne diseases were discussed. We also emphasizes the need for future research for broad commercialization of nano-based formulations in world market aiming a positive impact on public health.

A multicolor multiplex lateral flow assay for high-sensitivity analyte detection using persistent luminescent nanophosphors

Incorporating two persistent luminescent nanophosphors (PLNPs), green-emitting SrAl2O4:Eu2+,Dy3+ (SAO) and blue-emitting (Sr0.625Ba0.375)2MgSi2O7:Eu2+,Dy3+ (SBMSO), in a single lateral flow assay (LFA) establishes a luminescence-based, multiplex point-of-need test capable of simultaneously detecting two different analytes in a single sample. The advantages of this system are the high sensitivity and photostability of PLNPs, while only requiring access to minimal hardware and a smartphone for signal detection. The PLNPs were obtained by first wet milling bulk synthesized phosphor powders, followed by fractionation using differential centrifugal sedimentation to obtain monodisperse nanoparticles. A modified Stöber process was then employed to encapsulate the nanoparticles in a water-stable silica shell followed by attaching antibodies to the particles' surfaces using reductive amination chemistry. The resulting PLNPs were incorporated in an LFA to concurrently detect two independent model analytes, prostate-specific antigen (PSA) and human chorionic gonadotropin (hCG). The multicolor-multiplex PLNP-based assays were finally imaged using a smartphone-based imaging system with excellent detection limits (0.1 ng mL-1 of PSA and 1 ng mL-1 of hCG) that are competitive with commercially available LFAs.

Rapid screening and quantitative detection of Salmonella using a quantum dot nanobead-based biosensor

A quantum dot nanobead-based sensor is demonstrated for Salmonella detection with balanced sensitivity, specificity and high accuracy.

Development of A Lateral Flow Highway: Ultra-Rapid Multitracking Immunosensor for Cardiac Markers

The integration of several controlled parameters within a single test system is experiencing increased demand. However, multiplexed test systems typically require complex manufacturing. Here, we describe a multiplexed immunochromatographic assay that incorporates a conventional nitrocellulose membrane, which is used together with microspot printing, to construct adjacent microfluidic "tracks" for multiplexed detection. The 1 mm distance between tracks allows for the detection of up to four different analytes. The following reagents are applied in separate zones: (a) gold nanoparticle conjugates with antibodies against each analyte, (b) other antibodies against each analyte, and (c) antispecies antibodies. The immersion of the test strip in the sample initiates the lateral flow, during which reagents of different specificities move along their tracks without track erosion or reagent mixing. An essential advantage of the proposed assay is its extreme rapidity (1-1.5 min compared with 10 min for common test strips). This assay format was applied to the detection of cardiac and inflammatory markers (myoglobin, D-dimer, and C-reactive protein) in human blood, and was characterized by high reproducibility (8%-15% coefficient of variation) with stored working ranges of conventional tests. The universal character of the proposed approach will facilitate its use for various analytes.

Molecular phenotyping and image-guided surgical treatment of melanoma using spectrally distinct ultrasmall core-shell silica nanoparticles

Accurate detection and quantification of metastases in regional lymph nodes remain a vital prognostic predictor for cancer staging and clinical outcomes. As intratumoral heterogeneity poses a major hurdle to effective treatment planning, more reliable image-guided, cancer-targeted optical multiplexing tools are critically needed in the operative suite. For sentinel lymph node mapping indications, accurately interrogating distinct molecular signatures on cancer cells in vivo with differential levels of sensitivity and specificity remains largely unexplored. To address these challenges and demonstrate sensitivity to detecting micrometastases, we developed batches of spectrally distinct 6-nm near-infrared fluorescent core-shell silica nanoparticles, each batch surface-functionalized with different melanoma targeting ligands. Along with PET imaging, particles accurately detected and molecularly phenotyped cancerous nodes in a spontaneous melanoma miniswine model using image-guided multiplexing tools. Information afforded from these tools offers the potential to not only improve the accuracy of targeted disease removal and patient safety, but to transform surgical decision-making for oncological patients.

Development of peptide biosensor for the detection of dengue fever biomarker, nonstructural 1

Dengue virus (DENV) nonstructural 1 (NS1) protein is a specific and sensitive biomarker for the diagnosis of dengue. In this study, an efficient electrochemical biosensor that uses chemically modified affinity peptides was developed for the detection of dengue virus NS1. A series of amino acid-substituted synthetic peptides was rationally designed, chemically synthesized and covalently immobilized to a gold sensor surface. The sensor performance was monitored via square wave voltammetry (SWV) and electrochemical impedance spectroscopy (EIS). Potential affinity peptides specific for NS1 were chosen according to the dynamic current decrease in SWV experiments. Using circular dichroism, the molar ellipticity of peptides (DGV BP1–BP5) was determined, indicating that they had a mostly similar in random coil structure, not totally identical. Using SWV, DGV BP1 was selected as a promising recognition peptide and limit of detection for NS1 was found to be 1.49 μg/mL by the 3-sigma rule. DGV BP1 showed good specificity and stability for NS1, with low signal interference. The validation of the sensor to detect NS1 proteins was confirmed with four dengue virus culture broth (from serotype 1 to 4) as proof-of-concept. The detection performance of our sensor incorporating DGV BP1 peptides showed a statistically significant difference. These results indicate that this strategy can potentially be used to detect the dengue virus antigen, NS1, and to diagnosis dengue fever within a miniaturized portable device in point-of-care testing.

Label-free, color-indicating, and sensitive biosensors of cholesteric liquid crystals on a single vertically aligned substrate

Biosensors based on liquid crystal (LC) materials can be made by employing the sensitive interfacial effect between LC molecules and alignment layers on substrates. In the past, the optical texture observation method was used in the LC biosensor field. However, the method is limited by a complicated fabrication process and quantitative reproducibility of results that bv evidence that both the reliability and accuracy of LC biosensors need to be improved. In this report, we demonstrate that cholesteric LC (CLC) cells in which one substrate is coated with a vertically aligned layer can be used as a new sensing technology. The chirality of the single vertically anchored (SVA)/CLC biosensor was tested by detecting bovine serum albumin (BSA), a protein standard commonly used in the lab. The colors and corresponding spectrum of the SVA/CLC biosensor changed with the BSA concentrations. A detection limit of 1 ng/ml was observed for the SVA/CLC biosensor. The linear optical properties of the SVA/CLC biosensor produced cheap, inexpensive, and color-indicating detection of biomolecules, and may promote the technology of point-of-care devices for disease-related biomarker detection.