Pectins in Processed Fruits and Vegetables: Part II-Structure-Function Relationships

Insight into pectin-cation-phytate theory of hardening in common bean varieties with different sensitivities to hard-to-cook

In this study, a detailed quantitative analysis of the mechanisms linked with pectin-cation-phytate hypothesis of hard-to-cook development (HTC) was evaluated to assess the plausibility of this hypothesis. Several common bean varieties with varying sensitivities to HTC were characterized for pectin, cell wall bound calcium and inositol hexaphosphate (InsP₆) content before and after ageing. Ageing resulted in a significant decrease in InsP₆ content (resulting in calcium release) in all varieties. Despite not significantly changing during ageing, the cell wall bound calcium content significantly increased in most aged bean varieties upon short cooking indicating enhanced internal cation migration during the early phase of cooking in contrast to during ageing and soaking. Among the parameters evaluated in this study, the relative changes in InsP₆ content significantly correlated with the change in cooking times as well as changes in cell wall bound calcium content. Results obtained in this study suggest that in some bean varieties, pectin-cation-phytate hypothesis is the predominant mechanism by which hardening occurs during storage while in other varieties, the role of other factors such as phenolic crosslinking as suggested in literature cannot be ruled out.

Effect of high pressure homogenization on water-soluble pectin characteristics and bioaccessibility of carotenoids in mixed juice

The effect of high pressure homogenization (HPH) compared with simple blending and milling on mixed juice properties, including water-soluble pectin (WSP) characteristics and total carotenoid bioaccessibility (TCB) was investigated. Overall, HPH treatments, which comprised of varied pressures, passes and inlet temperature (IT) affected WSP characteristics. Increased pressure showed decreased molecular weight (M_w), galacturonic acid (GalA) content and branching, and enhanced degree of methylesterification (DM) and chain linearity, suggesting degradation of RG-I fragments. Two passes at 140 MPa enhanced GalA content, nevertheless it reduced DM, implying rearrangement of depolymerized fractions. Besides, elevated IT combined with high pressure increased GalA content and DM signifying thermo-solubilization of certain HG-rich pectin. Notably, the TCB was enhanced by higher pressure and elevated temperature, which had positive relationship with DM and chain linearity of WSP and negative correlations with GalA content and M_w. Results highlighted the potential of HPH to improve WSP characteristics to enhance TCB.

The Dietary Fiber Pectin: Health Benefits and Potential for the Treatment of Allergies by Modulation of Gut Microbiota

Purpose of Review

The incidence of allergies is increasing and has been associated with several environmental factors including westernized diets. Changes in environment and nutrition can result in dysbiosis of the skin, gut, and lung microbiota altering the production of microbial metabolites, which may in turn generate epigenetic modifications. The present review addresses studies on pectin-mediated effects on allergies, including the immune modulating mechanisms by bacterial metabolites.

Recent Findings

Recently, microbiota have gained attention as target for allergy intervention, especially with prebiotics, that are able to stimulate the growth and activity of certain microorganisms. Dietary fibers, which cannot be digested in the gastrointestinal tract, can alter the gut microbiota and lead to increased local and systemic concentrations of gut microbiota-derived short chain fatty acids (SCFAs). These can promote the generation of peripheral regulatory T cells (T_reg) by epigenetic modulation and suppress the inflammatory function of dendritic cells (DCs) by transcriptional modulation.

The dietary fiber pectin (a plant-derived polysaccharide commonly used as gelling agent and dietary supplement) can alter the ratio of Firmicutes to Bacteroidetes in gut and lung microbiota, increasing the concentrations of SCFAs in feces and sera, and reducing the development of airway inflammation by suppressing DC function.

Summary

Pectin has shown immunomodulatory effects on allergies, although the underlying mechanisms still need to be elucidated. It has been suggested that the different types of pectin may exert direct and/or indirect immunomodulatory effects through different mechanisms. However, little is known about the relation of certain pectin structures to allergies.

Analysis of chemical compounds’ content in different varieties of carrots, including qualification and quantification of sugars, organic acids, minerals, and bioactive compounds by UPLC

Twelve carrot varieties in different colours and sizes were investigated for chemical properties (dry matter, ash, pectins, titratable acidity, and pH), contents of vitamin C, sugar, organic acids, mineral (sodium, potassium, calcium, iron, and magnesium), and anti-oxidant activities (ABTS, FRAP, and ORAC). Moreover, total polyphenolics and total tetraterpenoids of colourful carrot varieties were presented. According to the study, sucrose was the dominant sugar and isocitric acid was the most common organic acid in carrot samples. In the case of mineral content, potassium, sodium, calcium, magnesium, and iron were identified, while copper was not identified in carrots. Additionally, most of the analyzed carrots were a good source of pectins (average—1.3%), except for mini-orange carrot. Purple-coloured carrot samples demonstrated the highest results for total sugar (11.2 g/100 g fm), total organic acid (2.8 g/100 g fm), total polyphenolic contents (224.4 mg/100 g fm), and anti-oxidant activities (17.1 mmol Trolox equivalents/100 g dm). In turn, the lowest results were observed in normal yellow carrot for total polyphenols (7.3 mg/100 g fm), and anti-oxidant activities (2.5 mmol Trolox equivalents/100 g dm); besides, the lowest total tetraterpenoids were determined in micro-white carrot—0.2 mg/100 g fm.

Exploration of the Microstructure and Rheological Properties of Sodium Alginate-Pectin-Whey Protein Isolate Stabilized Β-Carotene Emulsions: To Improve Stability and Achieve Gastrointestinal Sustained Release

Sodium alginate (SA)-pectin (PEC)-whey protein isolate (WPI) complexes were used as an emulsifier to prepare β-carotene emulsions, and the encapsulation efficiency for β-carotene was up to 93.08%. The confocal laser scanning microscope (CLSM) and scanning electron microscope (SEM) images showed that the SA-PEC-WPI emulsion had a compact network structure. The SA-PEC-WPI emulsion exhibited shear-thinning behavior and was in a semi-dilute or weak network state. The SA-PEC-WPI stabilized β-carotene emulsion had better thermal, physical and chemical stability. A small amount of β-carotene (19.46 ± 1.33%) was released from SA-PEC-WPI stabilized β-carotene emulsion in simulated gastric digestion, while a large amount of β-carotene (90.33 ± 1.58%) was released in simulated intestinal digestion. Fourier transform infrared (FTIR) experiments indicated that the formation of SA-PEC-WPI stabilized β-carotene emulsion was attributed to the electrostatic and hydrogen bonding interactions between WPI and SA or PEC, and the hydrophobic interactions between β-carotene and WPI. These results can facilitate the design of polysaccharide-protein stabilized emulsions with high encapsulation efficiency and stability for nutraceutical delivery in food and supplement products.

Radio frequency energy inactivates peroxidase in stem lettuce at different heating rates and associate changes in physiochemical properties and cell morphology

Radio frequency (RF) is an emerging technology applied in blanching treatment as alternative to conventional treatment. This study aimed to investigate the effects of RF heating rate on peroxidase (POD) inactivating efficiency, physiochemical properties (texture, color and vitamin C) and cell structure of stem lettuce. POD enzyme inactivation efficiency increased with increased RF heating rate. When POD activity was reduced to <5%, better physiochemical properties and less cell damage occurred in RF heating compared with conventional hot water (HW) blanching (HWB); Relative electrolyte leakage (REL) analysis and microscopic observation suggested that the loss of integrity of cell walls and membranes, the decrease in turgor pressure and the weakened connections between adjacent cells leaded to the deterioration of physiochemical properties. The degrees of cell destruction varied with RF heating rates, which provide a new idea for RF blanching for producing different types of fruits and vegetables products (Solid and juice products).

Short communication: The effect of pectin and sodium alginate on labans made from camel milk and bovine milk

Camel milk (CM) is gaining scientific attention due to its potential health and therapeutic benefits. Fermented drinkable yogurts (labans) were prepared from CM and bovine milk (BM) using mixed Streptococcus thermophilus and Lactobacillus delbrueckii ssp. bulgaricus bacteria supplemented with 1 of 2 hydrocolloids: pectin (0.1-0.3%) or sodium alginate (0.1-0.5%). The different labans were compared by studying their acidity and rheology as well as their structural and sensory properties. The CM and BM labans had titratable acidity values that ranged from 0.85 to 1.27 and 0.61 to 0.93%, respectively. Pectin at 0.2% enhanced the rheological properties of BM labans, but had no effect in CM labans. Sodium alginate at 0.3% and 0.5% increased viscosity, elastic or storage modulus (G'), and viscous or loss modulus (G″) values for both types of laban. Scanning electron microscopy indicated that the CM laban contained lower levels of "spike-like structures" than BM laban, and that the addition of hydrocolloids improved this effect. Quantitative descriptive sensory analysis showed that CM labans fortified with either 0.2% pectin or 0.3% sodium alginate were comparable to commercial BM laban in viscous mouthfeel. Fortified CM labans were more acidic and had stronger flavors than unfortified samples. Overall, this study demonstrated that the addition of sodium alginate or pectin at intermediate levels permits production of palatable CM labans of a satisfactory viscous consistency.

Ultrasound freeze-thawing style pretreatment to improve the efficiency of the vacuum freeze-drying of okra (Abelmoschus esculentus (L.) Moench) and the quality characteristics of the dried product

Vacuum freeze-drying is a new and high technology on agricultural product dehydrating dry, but it faces the high cost problem caused by high energy consumption. This study investigated the effect of ultrasound (US), freeze-thawing (including the freeze-air thawing (AT), freeze-water thawing (WT), freeze-ultrasound thawing (UST), and freeze-air ultrasound thawing (AT + US)) pretreatments on the vacuum freeze-drying efficiency and the quality of dried okra. The results indicated that the application of ultrasound and different freeze-thawing pretreatments reduced the drying time by 25.0%-62.50% and the total energy consumption was 24.28%-62.35% less. The AT pretreatment reduced the time by of okra slices by 62.50% and the total energy consumption was 62.35% less. The significant decrease in drying time was due to a change in the microstructure caused by pretreatment. Besides, the okra pretreated with the US retained most of the quality characteristics (flavor, color, hardness, and frangibility) among all methods, while, AT + US had the most changeable characteristics in quality, which is deprecated in our study. The okra pretreated with the US and AT, separately, had the best dry matter content loss (9.008%, 5.602%), lower chlorophyll degradation (5.05%, 5.44% less), and higher contents of total phenolics, total flavonoids, and pectin, with strong antioxidant capacity, compared to other methods. The pretreatments did not have a large effect on the functional groups and the structure of pectin, but slightly affected the viscosity. It can be concluded that AT and US pretreatment methods are better than others.

Influence of high hydrostatic pressure pretreatment on properties of vacuum-freeze dried strawberry slices

Effects of high hydrostatic pressure (HHP) (50, 100, 150, 200 and 250 MPa) pretreatment on water mobility and distribution, drying duration, microstructure, color, cell wall fraction and tissue structure of strawberry slices were investigated. HHP significantly increased water mobility of the strawberry slices, resulting in the reduction of drying duration by 9-24%. As the pretreatment pressure was increased, redness value and anthocyanin content continuously increased, soluble pectin (SBP) content increased and then decreased, while the contents of protopectin (PTP) and cellulose decreased. After the HHP pretreatment, chromoplasts and moisture was distributed more uniformly in the strawberry slices. Microscopy images showed the formation of microscopic holes or channels in the matrix and the breakdown of tissue structure by HHP. Results suggested HHP pretreatment disrupted the integrity of the fresh strawberry which enhanced the drying efficiency and migration of the chromoplasts during the vacuum-freeze drying process.

Development of nanoparticles coated with cassava bagasse pectin (Manihot esculenta Crantz) containing β-carotene for mucoadhesive applications

Pectin (PC) extracted from a solid residue from cassava roots (Manihot esculenta Crantz) was used to coat nanoparticles (NP) containing β-carotene (BC) aiming at the gastrointestinal administration of this lipophilic nutraceutical. The NP were prepared by spontaneous emulsification method using food grade components. Pectin-coated NP have been successfully prepared as confirmed by the increased particle size and negative surface charges due to the pectin's anionic nature. NP showed spherical shape and monodisperse distribution, with a mean size of 21.3 nm (polydispersity index (PDI) 0.29) for BC PC T80-NP (nanoparticle with β-carotene, pectin and Tween 80) and 261.4 nm (PDI 0.1) for BC PC T20-NP (nanoparticle with β-carotene, pectin and Tween 20). BC was encapsulated at amounts of 530 and 324 µg/ml for BC PC T80-NP and BC PC T20-NP, respectively, with high encapsulation efficiency (> 95%), increasing its antioxidant capacity in vitro, besides no cytotoxic effect. However, only BC PC T20-NP was stable over a 90 days storage period (4°C) and revealed a strong interaction between pectin and mucin. These results suggest that pectin-coated BC PC T20-NP is a promising strategy to improve the bioavailability and permeation of BC for administration through mucosal surfaces.

Thermal processing under oxygen-free condition of blueberry puree: Effect on anthocyanin, ascorbic acid, antioxidant activity, and enzyme activities

The effect of thermal treatment of blueberry was investigated using a designed grinding and continuous packaging system under oxygen-free conditions. The grinding, packaging, and heating at 90 °C for 30 min under anaerobic condition were compared to heating under aerobic conditions, showing complete inactivation of oxidative enzymes. Heating without oxygen retained anthocyanins and ascorbic acid whereas heating in atmospheric air does not. Delphinidin glycoside was mostly influenced by oxygen deficiency during heating, followed by petunidin and malvidin glycosides. The differences in oxygen sensitivity may be closely associated with the number of hydroxylation in the B ring. The result of anthocyanin led to higher antioxidant activity and redness values of purees heated without oxygen than purees heated with oxygen. Consequently, thermal processing under oxygen-free condition can prevent oxidation of anthocyanin, resulting in higher retention of color and nutritional values of blueberry products.

Effects of high pressure processing (HPP) on microorganisms and the quality of mango smoothies during storage

The objective of this study is to investigate the effects of high pressure processing (HPP) on the quality of mango smoothies and the inactivation of microorganisms therein, with heat treatments used as the control. Comparative analysis was conducted on the microbiological changes in the mango smoothies subjected to HPP at 400-600 MPa for 0-15 min. The total plate count (TPC) and the yeast and mold (YM) counts were found to be significantly inactivated through increases in the pressure and treatment time (p < 0.05). Conditions of 90 °C/20 min (HT), 500 MPa/8 min (HPP-500) and 600 MPa/5 min (HPP-600) were, thus, selected as the subsequent treatment for a storage study at 4 °C for 15 days, since these conditions had similar inactivation effects on TPC and YM. After 15 days of storage, the TPC was found to have increased by 3.87, 3.54 and 3.36 log10 cycles in the mango smoothies treated by HT, HPP-500 and HPP-600, respectively, while the YM counts remained at less than 1 log10 cycle in all samples. During storage, compared to the HT and HPP-600 samples, both the color and viscosity at 100 s-1 of samples treated by HPP-500 were found to be better maintained. Carotene content was better retained in storage after the HPP process than after the HT process. However, the different treatments had no effect on the pH nor on the total soluble solids (TSS) in the samples. The study ascertained that HPP-500 is able to ensure both the microbial safety and the quality of mango smoothies more effectively than HT and HPP-600.

Impacts of thermal and non-thermal processing on structure and functionality of pectin in fruit- and vegetable- based products: A review

Pectin, a major polysaccharide found in the cell walls of higher plants, plays major roles in determining the physical and nutritional properties of fruit- and vegetable-based products. An in-depth understanding of the effects of processing operations on pectin structure and functionality is critical for designing better products. This review, therefore, focuses on the progress made in understanding the effects of processing on pectin structure, further on pectin functionality, consequently on product properties. The effects of processing on pectin structure are highly dependent on the processing conditions. Targeted control of pectin structure by applying various processing operations could enhance textural, rheological, nutritional properties and cloud stability of products. While it seems that optimizing product quality in terms of physical properties is counteracted by optimizing the nutritional properties. Therefore, understanding plant component biosynthesis mechanisms and processing mechanisms could be a major challenge to balance among the quality indicators of processed products.

Acetic acid reducing the softening of lotus rhizome during heating by regulating the chelate-soluble polysaccharides

Lotus rhizomes were used to study on the relationship between the cell wall polysaccharides and cooked texture by adding acetic acid. Hardness and scanning electron microscopy results showed that acetic acid treatment can maintain higher hardness and the integrity of the cell wall. Then, the cell walls were sequentially extracted and divided into water-soluble fraction, chelate-soluble fraction (CSF), sodium carbonate-soluble fraction and hemicellulose fraction. The pectin fraction contents, monosaccharides composition, esterification degree and sugar ratios in different groups were evaluated, the results showed that acetic acid increased the total amount of CSF, decreased the esterification degree and less side chain compared that in the solely thermal treatment group. The nanostructures showed that acetic acid treatment maintained longer chain and destroy helical structure of CSF backbone. This work helps us to demonstrate the relationship between polysaccharides structure and cooked texture, and further control the plant-based vegetables processing texture in food industry.

Microwave and ultrasound assisted extraction of pectin from various fruits peel

Pectin, found in the cell walls of fruits and vegetables, is a complex colloidal polysaccharide. In this study, pectin was extracted using ultrasound and microwave-assisted extraction methods from waste lemon, mandarin, and kiwi peel to investigate their use as alternative source of pectin. Hydrochloric acid (HCl) and nitric acid (HNO₃) were used as the extracting agents. The effects of microwave power (360-600 W) and irradiation time (1, 2, 3 min) for microwave-assisted extraction (MAE) and of temperature (60 and 75 °C) and sonication time (15, 30, 45 min) on ultrasound-assisted extraction (UAE) on the yield of extracted pectin from the peels were investigated. Optimum conditions were determined for the extraction of pectin from all of the peel samples with the two extraction methods. The produced pectin yield and the degree of esterification were determined and, FT-IR and SEM analyses were performed. Kiwi peel gave the highest yield of extracted pectin using HCl as the solvent with 17.30% yield via UAE at 75 °C for 45 min and 17.97% yield via MAE at 360 W for, 3 min. It was concluded that lemon, mandarin, and kiwi peels all contained pectin and that MAE gave a better yield than UAE and could thus be used as an efficient and rapid technique for the extraction of pectin from the peels. The chemical structures of the pectin obtained using the two different extraction methods were similar and showed a high degree of methoxylation.

Biobased Cryogels from Enzymatically Oxidized Starch: Functionalized Materials as Carriers of Active Molecules

Starch recovered from an agrifood waste, pea pods, was enzymatically modified and used to prepare cryogels applied as drug carriers. The enzymatic modification of starch was performed using the laccase/(2,2,6,6-tetramethylpiperidin-1-yl)oxyl TEMPO system, at a variable molar ratio. The characterization of the ensuing starches by solution NMR spectroscopy showed partial conversion of the primary hydroxyl groups versus aldehyde and carboxyl groups and successive creation of hemiacetal and ester bonds. Enzymatically modified starch after simple freezing and lyophilization process provided stable and compact cryogels with a morphology characterized by irregular pores, as determined by atomic force (AFM) and scanning electron microscopy (SEM). The application of cryogels as carriers of active molecules was successfully evaluated by following two different approaches of loading with drugs: a) as loaded sponge, by adsorption of drug from the liquid phase; and b) as dry-loaded cryogel, from a dehydration step added to loaded cryogel from route (a). The efficiency of the two routes was studied and compared by determining the drug release profile by proton NMR studies over time. Preliminary results demonstrated that cryogels from modified starch are good candidates to act as drug delivery systems due to their stability and prolonged residence times of loaded molecules, opening promising applications in biomedical and food packaging scenarios.

MUCO-DIS: a New AFM-Based Nanoscale Dissolution Technique

Mucoadhesion-based drug delivery systems have recently gained interest because of their bio-adhesion capability, which results in enhanced residence time leading to prolonged duration of action with the mucosal surface, potentially improving compliance and convenience. Mucoadhesion testing of these formulations is widely reported; however, this is technically challenging due to the absence of any standard methods and difficulty in conducting mucoadhesion, formulation-mucosal surface interaction, mucosal surface topography and drug release in a single experiment. As these measurements are currently conducted separately, on replicate formulations, results can often be subjective and difficult to correlate. Hence, the aim of the present study was to develop a new AFM-based single-entity ex vivo muco-dissolution (MUCO-DIS) technique to simultaneously evaluate mucoadhesion force, 3D surface topography, polymer dissolution and drug release characteristics. To demonstrate the potential of the current technique, the interactions between model pectin microparticles containing metformin HCl and a range of gastrointestinal mucosal surfaces (gastric, small intestine, large intestine and buccal) were studied. This novel system has not only successfully determined the mucoadhesion force, polymer dissolution and drug release information but has also highlighted the difference in microparticle performance with different mucosal targets. The current work has highlighted the potential of this newly developed MUCO-DIS system and we believe this will be a valuable tool for characterising these popular pharmaceutical formulations. This technique could also provide an opportunity to other scientific fields to evaluate materials, substrate behaviour and their interactions in their hydrated state at nanoscale with real-time chemical and surface mapping.