Fluorescence-quenching phenomenon by photoinduced electron transfer between a fluorescent dye and a nucleotide base

Probing of Nucleic Acid Structures, Dynamics, and Interactions With Environment-Sensitive Fluorescent Labels

Fluorescence labeling and probing are fundamental techniques for nucleic acid analysis and quantification. However, new fluorescent probes and approaches are urgently needed in order to accurately determine structural and conformational dynamics of DNA and RNA at the level of single nucleobases/base pairs, and to probe the interactions between nucleic acids with proteins. This review describes the means by which to achieve these goals using nucleobase replacement or modification with advanced fluorescent dyes that respond by the changing of their fluorescence parameters to their local environment (altered polarity, hydration, flipping dynamics, and formation/breaking of hydrogen bonds).

Dynamic and static quenching of 2-aminopurine fluorescence by the natural DNA nucleotides in solution

2-aminopurine (2AP) is a responsive fluorescent base analogue that is used widely as a probe of the local molecular environment in DNA. The ability of 2AP to report changes in local conformation and base-stacking interactions arises from the efficient quenching of its fluorescence by the natural DNA bases. However, the mechanism of this inter-base quenching remains imperfectly understood. Two previous studies of the collisional quenching of 2AP by the natural bases, in different buffer solutions, showed that dynamic quenching efficiency depends on the identity of the natural base, but disagreed on the relative quenching efficiencies of the bases. We report a comprehensive investigation of inter-base quenching of 2AP by the natural nucleoside monophosphates (NMPs), replicating the buffer conditions used in the previous studies. Using time-resolved fluorescence measurements to distinguish between dynamic and static quenching, we find that the dynamic quenching rate constants of the different bases show a consistent trend across both buffers, and this is in line with a charge-transfer mechanism. Time-resolved measurements also provide insight into static quenching, revealing formation of 2AP-NMP ground-state complexes in which 2AP displays a very short fluorescence lifetime, comparable to that seen in oligonucleotides. In these complexes, the dependence of the rate of quenching on the partner base also supports a charge-transfer mechanism.

Fluorescein-Stabilized i-Motif DNA and Its Unfolding Leading to a Stronger Adsorption Affinity

Several previous studies have indicated that polydeoxycytidine (poly-C) DNA has an anomalously high affinity for different types of surfaces. It was hypothesized that the formation of an i-motif structure could be a factor responsible for this enhanced affinity, but this is against the notion that a folded molecule should have fewer interactions with a surface. Herein, the properties of poly-C DNA were examined in detail, focusing on the presence or absence of a FAM (carboxyfluorescein) label and its subsequent adsorption on graphene oxide. Fluorescence and CD spectroscopy studies indicated that FAM can stabilize an i-motif structure in C15 DNA. In particular, the fluorescence of FAM is drastically quenched when the DNA is folded. This structure is irreversibly unfolded upon heating. Furthermore, the unfolded structure has an even higher affinity for graphene oxide than the folded structure. Finally, a large portion of the folded C15 unfolds upon desorption from graphene oxide, and unfolding could happen upon adsorption or desorption of the DNA. This study provides a method to further enhance the adsorption stability of poly-C DNA and calls for care when investigating the potential effects of dye labels on DNA.

A DNA-Based Biosensor Assay for the Kinetic Characterization of Ion-Dependent Aptamer Folding and Protein Binding

Therapeutic and diagnostic nucleic acid aptamers are designed to bind tightly and specifically to their target. The combination of structural and kinetic analyses of aptamer interactions has gained increasing importance. Here, we present a fluorescence-based switchSENSE aptasensor for the detailed kinetic characterization of aptamer-analyte interaction and aptamer folding, employing the thrombin-binding aptamer (TBA) as a model system. Thrombin-binding aptamer folding into a G-quadruplex and its binding to thrombin strongly depend on the type and concentration of ions present in solution. We observed conformational changes induced by cations in real-time and determined the folding and unfolding kinetics of the aptamer. The aptamer's affinity for K⁺ was found to be more than one order of magnitude higher than for other cations (K⁺ > NH₄⁺ >> Na⁺ > Li⁺). The aptamer's affinity to its protein target thrombin in the presence of different cations followed the same trend but differed by more than three orders of magnitude (K_D = 0.15 nM to 250 nM). While the stability (k_OFF) of the thrombin-TBA complex was similar in all conditions, the cation type strongly influenced the association rate (k_ON). These results demonstrated that protein-aptamer binding is intrinsically related to the correct aptamer fold and, hence, to the presence of stabilizing ions. Because fast binding kinetics with on-rates exceeding 10⁸ M^-1s^-1 can be quantified, and folding-related phenomena can be directly resolved, switchSENSE is a useful analytical tool for in-depth characterization of aptamer-ion and aptamer-protein interactions.

Fluorescence quenching by photoinduced electron transfer between 7-methoxycoumarin and guanine base facilitated by hydrogen bonds: an in silico study

In this study, the effects of hydrogen bond (H-bond) formation on fluorescence quenching of 7-methoxycoumarin (7MC) via photo-induced electron transfer from a guanine base (Gua) are investigated using a combined quantum mechanics/molecular mechanics simulation. The electronic structure is calculated by the floating occupation molecular orbital complete active space configuration interaction modification on a semiempirical method. Then the full multiple spawning method is employed for the dynamics simulations on multiple electronic states. The methods employed here are validated by simulating direct dynamics of 7MC (without Gua) and compared with available experimental results. Our computational results are in good agreement with the previously reported experimental results in terms of spectroscopic properties of 7MC. In the case of a H-bonded 7MC-Gua complex, the results from constrained dynamics simulations and single-point calculations suggest that the electron transfer occurs on the second excited state and it depends not only on the H-bond length but also on the intermolecular planarity between 7MC and Gua. Moreover, a proton coupled electron transfer can occur at ≈1 Å of H-bond length, where a proton from Gua is also transferred together with the electron to 7MC. The obtained simulations are expected to be greatly beneficial for designing effective fluorescently labeled nucleotide probes as well as providing information for precise fluorescence signal interpretation.

Reduced False Positives and Improved Reporting of Loop-Mediated Isothermal Amplification using Quenched Fluorescent Primers

Loop-mediated isothermal amplification (LAMP) is increasingly used in molecular diagnostics as an alternative to PCR based methods. There are numerous reported techniques to detect the LAMP amplification including turbidity, bioluminescence and intercalating fluorescent dyes. In this report we show that quenched fluorescent labels on various LAMP primers can be used to quantify and detect target DNA molecules down to single copy numbers. By selecting different fluorophores, this method can be simply multiplexed. Moreover this highly specific LAMP detection technique can reduce the incidence of false positives originating from mispriming events. Attribution of these events to particular primers will help inform and improve LAMP primer design.

Initial state of DNA-Dye complex sets the stage for protein induced fluorescence modulation

Protein-induced fluorescence enhancement (PIFE) is a popular tool for characterizing protein-DNA interactions. PIFE has been explained by an increase in local viscosity due to the presence of the protein residues. This explanation, however, denies the opposite effect of fluorescence quenching. This work offers a perspective for understanding PIFE mechanism and reports the observation of a phenomenon that we name protein-induced fluorescence quenching (PIFQ), which exhibits an opposite effect to PIFE. A detailed characterization of these two fluorescence modulations reveals that the initial fluorescence state of the labeled mediator (DNA) determines whether this mediator-conjugated dye undergoes PIFE or PIFQ upon protein binding. This key role of the mediator DNA provides a protocol for the experimental design to obtain either PIFQ or PIFE, on-demand. This makes the arbitrary nature of the current experimental design obsolete, allowing for proper integration of both PIFE and PIFQ with existing bulk and single-molecule fluorescence techniques.

Protein-induced fluorescence enhancement (PIFE) is a popular tool for characterizing protein-DNA interactions. Here, authors provide a perspective on understanding the general phenomenon of induced fluorescence modulation

DNA-templated Au nanoclusters coupled with proximity-dependent hybridization and guanine-rich DNA induced quenching: a sensitive fluorescent biosensing platform for DNA detection

In this paper, the fluorescence signal of poly(A) DNA-templated Au nanoclusters (AuNCs) is found to be greatly quenched by photoinduced electron transfer (PET) when they are close to guanine (G)-rich DNA. Based on the findings, we have designed a low-cost fluorescence biosensing strategy for the sensitive detection of DNA. Highly luminescent and photo-stable poly(A) DNA-AuNCs were utilized as the fluorescent indicator and G-rich DNA was utilized as the fluorescent quencher. In the absence of target DNA, DNA-AuNCs failed to hybridize with the G-rich DNA and did not form the duplex DNA structure. Strong fluorescence intensity at 475 nm was observed due to the DNA-AuNCs being far away from the G-rich DNA. However, in the presence of target DNA, the DNA-AuNCs together with G-rich DNA could hybridize with the target DNA, leading to the 5' terminus of the DNA-AuNCs and the 3' terminus of G-rich DNA being in close proximity and promoting the cooperative hybridization. Therefore, a "Y" junction structure was formed and the G-rich sequences were brought close to the AuNCs. Therefore, the fluorescence intensity of the sensing system decreased significantly. Taking advantage of the poly(A) DNA-templated Au nanoclusters and G-rich DNA proximity-induced quenching, the strategy could be extended to determine other biomolecules by designing appropriate sequences of DNA probes.

A simple fluorescent aptamer based assay coupled with fluorescence scanning capillary array for aflatoxin B1

We developed a simple aptamer fluorescence assay for aflatoxin B1 (AFB1) detection by using an array of capillaries. The 34-nt aptamer having a single fluorescein (FAM) label on the 24th T nucleotide generated a remarkable fluorescence increase upon AFB1 binding. The use of fluorescence scanning capillary array allowed for the analysis of multiple samples with low sample consumption, showing advantages of simplicity, rapidity and high throughput analysis. The detection limit of AFB1 reached 0.5 nM. This assay has great potential for analysis in food safety and environmental monitoring.

Sequence- And Structure-Specific Probing of RNAs by Short Nucleobase-Modified dsRNA-Binding PNAs Incorporating a Fluorescent Light-up Uracil Analog

RNAs are emerging as important biomarkers and therapeutic targets. The strategy of directly targeting double-stranded RNA (dsRNA) by triplex-formation is relatively underexplored mainly due to the weak binding at physiological conditions for the traditional triplex-forming oligonucleotides (TFOs). Compared to DNA and RNA, peptide nucleic acids (PNAs) are chemically stable and have a neutral peptide-like backbone, and thus, they show significantly enhanced binding to natural nucleic acids. We have successfully developed nucleobase-modified dsRNA-binding PNAs (dbPNAs) to facilitate structure-specific and selective recognition of dsRNA over single-stranded RNA (ssRNA) and dsDNA regions at near-physiological conditions. The triplex formation strategy facilitates the targeting of not only the sequence but also the secondary structure of RNA. Here, we report the development of novel dbPNA-based fluorescent light-up probes through the incorporation of A-U pair-recognizing 5-benzothiophene uracil (^btU). The incorporation of ^btU into dbPNAs does not affect the binding affinity toward dsRNAs significantly, in most cases, as evidenced by our nondenaturing gel shift assay data. The blue fluorescence emission intensity of ^btU-modified dbPNAs is sequence- and structure-specifically enhanced by dsRNAs, including the influenza viral RNA panhandle duplex and HIV-1-1 ribosomal frameshift-inducing RNA hairpin, but not ssRNAs or DNAs, at 200 mM NaCl, pH 7.5. Thus, dbPNAs incorporating ^btU-modified and other further modified fluorescent nucleobases will be useful biochemical tools for probing and detecting RNA structures, interactions, and functions.

Facile detection of melamine by a FAM-aptamer-G-quadruplex construct

The development of a novel method for melamine detection that uses a FAM-aptamer-G-quadruplex construct due to the efficient quenching ability of an aptamer-linked G-quadruplex is reported herein. The construct, which is labeled with the fluorescent dye 6-carboxyfluorescein (FAM), consists of two parts: a melamine-binding aptamer and a G-rich sequence that can form a G-quadruplex structure. Because of the specific recognition of melamine by the T-rich aptamer, this aptamer folds into a hairpin structure in the presence of melamine, which draws the G-quadruplex closer to the FAM fluorophore, leading to the quenching of the fluorescence of FAM. Thus, a highly sensitive and selective fluorescence strategy for assaying melamine was established. Under optimal conditions, the fluorescence quenching is proportional to the concentration of melamine within the range 10-90 nM, and the method has a detection limit of 6.32 nM. Further application of the method to plastic cup samples suggested that it permitted recoveries of between 97.15% ± 1.02 and 101.92% ± 2.07. The detected amounts of melamine spiked into the plastic cup samples and the corresponding amounts measured by HPLC were in good accordance, indicating that this fluorescent method is reliable and practical. Owing to its high sensitivity, excellent selectivity, and convenient procedure, this strategy represents a promising alternative method of melamine screening. Graphical abstract.

Development of real-time fluorescent reverse transcription loop-mediated isothermal amplification assay with quenching primer for influenza virus and respiratory syncytial virus

Influenza virus and respiratory syncytial virus cause acute upper and lower respiratory tract infections, especially in children and the elderly. Early treatment for these infections is thought to be important, so simple and sensitive detection methods are needed for use at clinical sites. Therefore, in this study, real-time reverse transcription loop-mediated isothermal amplification assays with quenching primer for influenza virus and respiratory syncytial virus were developed. Evaluation of a total of 113 clinical specimens compared to real-time RT-PCR assays showed that the novel assays could distinguish between the types and subtypes of influenza virus and respiratory syncytial virus and had 100% diagnostic specificity. The diagnostic sensitivity of each assay exceeded 85.0% and the assays showed sufficient clinical accuracy. Furthermore, positive results could be obtained in around 15 min using the novel assays in cases with high concentrations of virus. The developed assays should be useful for identifying influenza virus and respiratory syncytial virus cases not only in experimental laboratories but also in hospital and quarantine laboratories.

Expanding chemical space of DNA-binding molecules with three base-binding units

A new molecule NC3-3 designed to expand chemical space of parent molecule NCD by adding the third base-binding unit was reported. NC3-3 bound to the G-G mismatch in the 5'-CGG-3'/5'-CGG-3' motif but not to that in 5'-GGC-3'/5'-GGC-3'. This binding selectivity is similar to that reported for NCD. Fluorimetric screening of NCD and NC3-3 to dsDNA library containing yGw/xGz motifs showed that NC3-3 still kept the sequence selectivity as we observed for NCD-binding. The third naphthyridine heterocycle in NC3-3 affected the mode of the binding, but a little effect on the sequence selectivity.

Detection of exosome miRNAs using molecular beacons for diagnosing prostate cancer

Prostate cancer is the fifth leading cause of cancer-related deaths among males worldwide. However, the biomarker for diagnosing prostate cancer that is used currently has limitations that must be overcome. Recently, several studies have demonstrated that the cancer liquid biopsy can be implemented by using exosome miRNAs. However, the current methods for the detection of exosome miRNAs are time-consuming, expensive, and laborious. Thus, we investigated a novel method for diagnosing prostate cancer that involves the use of molecular beacons for the in situ detection of miRNAs in exosomes from prostate cancer cells. We chose miRNA-375 and miRNA-574-3p as the target miRNAs for prostate cancer, and these markers in exosomes produced by prostate cancer cells including DU145 and PC-3 were successfully detected using molecular beacons. High fluorescent signals were obtained from MB and miRNA hybridization in exosomes in a concentration-dependent manner. In addition, exosome miRNAs can be detected even in the presence of human urine, so this method can be applied directly using human urine to perform liquid biopsies for prostate cancer. Overall, the in situ detection of exosome miRNAs using molecular beacons can be developed as a simple, cost effective, and non-invasive liquid biopsy for diagnosing prostate cancer.

The mechanism and regularity of quenching the effect of bases on fluorophores: the base-quenched probe method

The base-quenched probe method for detecting single nucleotide polymorphisms (SNPs) relies on real-time PCR and melting-curve analysis, which might require only one pair of primers and one probe. At present, it has been successfully applied to detect SNPs of multiple genes. However, the mechanism of the base-quenched probe method remains unclear. Therefore, we investigated the possible mechanism of fluorescence quenching by DNA bases in aqueous solution using spectroscopic techniques. It showed that the possible mechanism might be photo-induced electron transfer. We next analyzed electron transfer or transmission between DNA bases and fluorophores. The data suggested that in single-stranded DNA, the electrons of the fluorophore are transferred to the orbital of pyrimidine bases (thymine (T) and cytosine (C)), or that the electron orbitals of the fluorophore are occupied by electrons from purine bases (guanine (G) and adenine (A)), which lead to fluorescence quenching. In addition, the electrons of a fluorophore excited by light can be transmitted along double-stranded DNA, which gives rise to stronger fluorescence quenching. Furthermore, we demonstrated that the quenching efficiency of bases is in the order of G > C ≥ A ≥ T and the capability of electron transmission of base-pairs in double-stranded DNA is in the order of CG[combining low line] ≥ GC[combining low line] > TA[combining low line] ≥ AT[combining low line] (letters representing bases on the complementary strand of the probe are bold and underlined), and the most common commercial fluorophores including FAM, HEX, TET, JOE, and TAMRA could be influenced by bases and are in line with this mechanism and regularity.

BODIPY-labeled Fluorescent Aptamer Sensors for Turn-on Sensing of Interferon-gamma and Adenine Compounds on Cells

An on-cell aptamer sensor has the potential to reveal cell-cell communications by signalling molecules. We attempted to design new fluorescent aptamer sensors for the sensing of IFN-γ and adenine compounds on cells. BODIPY-labeled external quencher-free aptamer sensors have allowed a turn-on detection of the target molecule with improved off/on efficiency.

A Cleavage-Responsive Stem-Loop Hairpin for Assaying Guide RNA Activity

The scope of the CRISPR-Cas9 technology now reaches far beyond genomic engineering. While significant efforts are driving the evolution of this revolutionary biomedical tool, the in vitro cleavage assay remains the standard method implemented to validate the guide RNA that directs endonuclease Cas9 to a desired genomic target. Here, we report the development of an alternative guide RNA validation system called GUIDER. GUIDER features a hairpin loop structure with a proximal guanosine-rich unit, a distal fluorophore unit, and a gRNA-targeting stem component. Cleavage of GUIDER by its complementary RNA-guided Cas9 endonuclease complex yields a fluorescent emission at 525 nm, signaling effective cleavage of the hairpin structure. GUIDER was validated using the model gene target mpcsk9, and it was able to identify the gRNA that could most efficiently cleave the target mpcsk9 gene. The modular design of GUIDER should allow it to have broad applicability in validating gRNAs, and its fluorescent signal output offers a rapid, simple, and quantitative measure of Cas9-mediated DNA cleavage.

An atomistic view on carbocyanine photophysics in the realm of RNA

Carbocyanine dyes have a long-standing tradition in fluorescence imaging and spectroscopy, due to their photostability and large spectral separation between individual dye species. Herein, we explore the versatility of cyanine dyes to probe the dynamics of nucleic acids and we report on the interrelation of fluorophores, RNA, and metal ions, namely K⁺ and Mg²⁺. Photophysical parameters including the fluorescence lifetime, quantum yield and dynamic anisotropy are monitored as a function of the nucleic acid composition, conformation, and metal ion abundance. Occasional excursions to a non-fluorescent cis-state hint at the remarkable sensitivity of carbocyanines to their local environment. Comparison of time-correlated single photon experiments with all-atom molecular dynamics simulations demonstrate that the propensity of photoisomerization is dictated by sterical constraints imposed on the fluorophore. Structural features in the vicinity of the dye play a crucial role in RNA recognition and have far-reaching implications on the mobility of the fluorescent probe. An atomic level description of the mutual interactions will ultimately benefit the quantitative interpretation of single-molecule FRET measurements on large RNA systems.

Synthetic receptor molecules for selective fluorescence detection of 8-oxo-dGTP in aqueous media

A series of 9-hydroxy-1,3-diazaphenoxazine-2-one derivatives were synthesized as fluorescent receptor molecules for 8-oxo-dGTP, which attach the cyclen-zinc complex at the 3-N position as the binding site for the triphosphate and the (2-aryloxycarbonylamino)ethyl group at the 9-O position as the hydrogen bonding site for 8-oxoguanine. Among these molecules, the receptor molecule 5a-Zn constructed of the ethyl linker at 3-N and the (2-benzyloxycarbonyl amino)ethyl group at 9-O displayed the best recognition ability for 8-oxoguanosine triphosphate (8-oxo-dGTP) in aqueous media. The receptor 5a-Zn was also shown to selectively detect 8-oxo-dGTP in a cell lysate solution.

Enhancing the Affinity of Anti-Human α-Thrombin 15-mer DNA Aptamer and Anti-Immunoglobulin E Aptamer by PolyT Extension

Aptamer affinity capillary electrophoresis-laser-induced fluorescence (CE-LIF) for protein detection takes advantage of aptamers for their ease of synthesis and labeling, small size, and having many negative charges. Its success relies on the high binding affinity of aptamers. One 15-mer DNA aptamer (5'-GGT TGG TGT GGT TGG-3', Apt15) shows desirable specificity for human α-thrombin, an important enzyme with multiple functions in blood. However, Apt15 has weak binding affinity, and the use of Apt15 in affinity CE-LIF analysis remains challenging. Here we reported that extension of Apt15 at the 3'-end with a polyT tail having length of 18 T or longer significantly enhanced its affinity and enabled a well-isolated and stable peak for thrombin-aptamer complex in affinity CE. It was likely that the improvement of binding affinity resulted from double binding, an additional interaction of the polyT tail with thrombin in addition to the Apt15 section binding to thrombin. With dye-labeled Apt15 having a T₂₅ tail, we achieved detection of thrombin at concentrations as low as 0.1 nM by affinity CE-LIF. This aptamer probe specifically bound to human α-thrombin, showing negligible affinity for human β- and γ-thrombin, which are proteolyzed derivatives of human alpha α-thrombin and share similar structure. This strategy of adding a polyT extension also enhanced the binding affinity of anti-immunoglobulin E aptamer in CE-LIF analysis, showing that the affinity enhancement approach is not limited to the thrombin-binding aptamer and has potential for more applications in bioanalysis.

Analyzing Spin Selectivity in DNA-Mediated Charge Transfer via Fluorescence Microscopy

Understanding spin-selective interactions between electrons and chiral molecules is critical to elucidating the significance of electron spin in biological processes and to assessing the potential of chiral assemblies for organic spintronics applications. Here, we use fluorescence microscopy to visualize the effects of spin-dependent charge transport in self-assembled monolayers of double-stranded DNA on ferromagnetic substrates. Patterned DNA arrays provide background regions for every measurement to enable quantification of substrate magnetization-dependent fluorescence due to the chiral-induced spin selectivity effect. Fluorescence quenching of photoexcited dye molecules bound within DNA duplexes is dependent upon the rate of charge separation/recombination upon photoexcitation and the efficiency of DNA-mediated charge transfer to the surface. The latter process is modulated using an external magnetic field to switch the magnetization orientation of the underlying ferromagnetic substrates. We discuss our results in the context of the current literature on the chiral-induced spin selectivity effect across various systems.

An Optically Modulated Self-Assembled Resonance Energy Transfer Pass Gate

We demonstrate an optically controlled molecular-scale pass gate that uses the photoinduced dark states of fluorescent molecules to modulate the flow of excitons. The device consists of four fluorophores spatially arranged on a self-assembled DNA nanostructure. Together, they form a resonance energy transfer (RET) network resembling a standard transistor with a source, channel, drain, and gate. When the gate fluorophore is directly excited, the device is toggled on. Excitons flow freely from the source to the drain, producing strong output fluorescence. Without this excitation, exciton flow through the device is hindered by absorbing paths along the way, resulting in weak output fluorescence. In this Letter, we describe the design and fabrication of the pass gate. We perform a steady-state analysis revealing that the on/off fluorescence ratio for this particular implementation is ∼8.7. To demonstrate dynamic modulation of the pass gate, we toggle the gate excitation on and off and measure the corresponding change in output fluorescence. We characterize the rise and fall times of these transitions, showing that they are faster and/or more easily achieved than other methods of RET network modulation. The pass gate is the first dynamic RET-based logic gate exclusively modulated by dark states and serves as a proof-of-concept device for building more complex RET systems in the future.

The G-BHQ synergistic effect: Improved double quenching molecular beacons based on guanine and Black Hole Quencher for sensitive simultaneous detection of two DNAs

We designed two double quenching molecular beacons (MBs) with simple structure based on guanine (G base) and Black Hole Quencher (BHQ), and developed a new analytical method for sensitive simultaneous detection of two DNAs by synchronous fluorescence analysis. In this analytical method, carboxyl fluorescein (FAM) and tetramethyl-6-carboxyrhodamine (TAMRA) were respectively selected as fluorophore of two MBs, Black Hole Quencher 1 (BHQ-1) and Black Hole Quencher 2 (BHQ-2) were respectively selected as organic quencher, and three continuous nucleotides with G base were connected to organic quencher (BHQ-1 and BHQ-2). In the presence of target DNAs, the two MBs hybridize with the corresponding target DNAs, the fluorophores are separated from organic quenchers and G bases, leading to recovery of fluorescence of FAM and TAMRA. Under a certain conditions, the fluorescence intensities of FAM and TAMRA all exhibited good linear dependence on their concentration of target DNAs (T1 and T2) in the range from 4 × 10^-10 to 4 × 10^-8molL^-1 (M). The detection limit (3σ, n = 13) of T1 was 3 × 10^-10M and that of T2 was 2×10^-10M, respectively. Compared with the existing analysis methods for multiplex DNA with MBs, this proposed method based on double quenching MBs is not only low fluorescence background, short analytical time and low detection cost, but also easy synthesis and good stability of MB probes.

Competitive fluorescence anisotropy/polarization assay for ATP using aptamer as affinity ligand and dye-labeled ATP as fluorescence tracer

We developed an aptamer-based competitive fluorescence anisotropy (FA)/fluorescence polarization (FP) assay for adenosine triphosphate (ATP). Different from the traditional fluorescence polarization immunoassays for small molecules, here DNA aptamer against ATP was used as affinity ligand, and tetramethylrhodamine (TMR) labeled ATP served as fluorescent tracer. The binding between TMR-labeled ATP and aptamer gave large FA due to molecular volume increase and restricted rotation of the dye-labeled ATP. When ATP was added in solution, ATP competitively displaced the TMR-labeled ATP from aptamer affinity complex, causing decrease of FA of TMR-labeled ATP. The buffer containing MgCl₂ and incubation at low temperature were preferred for large FA change in the FA assay. The FA change was further enhanced in this competitive FA assay by increasing the molecular weight of aptamer through extension of aptamer sequences or conjugating streptavidin protein on aptamer. This method allowed for the detection of ATP in the range from 0.5μM to 1mM, generating the maximum FA change about 0.187 (corresponding maximum FP change about 0.242). The detection of ATP spiked in diluted urine or serum sample was achieved, showing capability for analysis in complex sample matrix. This assay also enabled the detection of the analogues of ATP, e.g. adenosine, adenosine monophosphate (AMP), and adenosine diphosphate (ADP) with similar sensitivity. This aptamer-based competitive FA assay takes advantages of aptamer in ease of synthesis, good thermal stability, and facile modulating the molecular mass of aptamer.

A G-quadruplex based fluorescent oligonucleotide turn-on probe towards iodides detection in real samples

A basket-type G-quadruplex (GQ) fluorescent oligonucleotide (OND) probe is designed to detect iodides dependent on thymine-Hg(II)-thymine (T-Hg(II)-T) base pairs and the intrinsic fluorescence quenching capacity of GQ. In the presence of Hg(II) ions (Hg²⁺), the two hexachloro-fluorescein-labeled ONDs form a hairpin structure and the fluorophores are dragged close to the GQ, leading to fluorescence quenching of the probe due to photoinduced electron transfer. Upon addition of iodide anions, Hg²⁺ are extracted from T-Hg(II)-T complexes which attributes to the stronger binding with iodide anions, resulting in the fluorescence recovery. Through performing the fluorescence quenching and recovery processes, this probe developed a fluorescence turn-on sensor for iodide anions determination over a linear range of 20-200nmol/L with a limit of detection of 5nmol/L. The practical use of the turn-on technology was demonstrated by its application in determination of iodides in water, food, pharmaceutical products and biological samples.

FRET enhancement close to gold nanoparticles positioned in DNA origami constructs

Here we investigate the energy transfer rates of a Förster resonance energy transfer (FRET) pair positioned in close proximity to a 5 nm gold nanoparticle (AuNP) on a DNA origami construct. We study the distance dependence of the FRET rate by varying the location of the donor molecule, D, relative to the AuNP while maintaining a fixed location of the acceptor molecule, A. The presence of the AuNP induces an alteration in the spontaneous emission of the donor (including radiative and non-radiative rates) which is strongly dependent on the distance between the donor and AuNP surface. Simultaneously, the energy transfer rates are enhanced at shorter D-A (and D-AuNP) distances. Overall, in addition to the direct influence of the acceptor and AuNP on the donor decay there is also a significant increase in decay rate not explained by the sum of the two interactions. This leads to enhanced energy transfer between donor and acceptor in the presence of a 5 nm AuNP. We also demonstrate that the transfer rate in the three "particle" geometry (D + A + AuNP) depends approximately linearly on the transfer rate in the donor-AuNP system, suggesting the possibility to control FRET process with electric field induced by 5 nm AuNPs close to the donor fluorophore. It is concluded that DNA origami is a very versatile platform for studying interactions between molecules and plasmonic nanoparticles in general and FRET enhancement in particular.

Selective recognition of biologically important anions using a diblock polyfluorene–polythiophene conjugated polyelectrolyte

Fluorescence detection of nucleotide phosphates with a polyfluorene–polythiophene diblock copolymer is demonstrated, accompanied by determination of the sensor mechanism.

Enhancement of fluorescent resonant energy transfer and the antenna effect in DNA structures with multiple fluorescent dyes

This study examines the use of surfactants and metal cations to enhance the long range fluorescent resonant energy transfer (FRET) and the antenna effect from three TAMRA donor dyes to one Texas Red acceptor dye conjugated in dsDNA structure.

A dual-colored ratiometric-fluorescent oligonucleotide probe for the detection of human telomerase RNA in cell extracts

A dual-colored ratiometric-fluorescent oligonucleotide probe is designed for the detection of human telomerase RNA (hTR) in cell extracts.

Exceptionally Selective and Tunable Sensing of Guanine Derivatives and Analogues by Structural Complementation in a G-Quadruplex

A guanine-vacancy-bearing G-quadruplex (GVBQ) interacts with guanine and derivatives by a structural complementation to form a more stable and intact G-quadruplex. Sensors using GVBQs are devised to detect guanine and other nucleobases, and their derivatives derived from structurally similar compounds. A strict requirement of Hoogsteen hydrogen bonds between the GVBQ and analyte in the structural complementation confers exceptional selectivity on the analyte. As such, subtle modifications on analytes affecting even a single hydrogen bond can preclude the recognition. In principle, the strategy may also be expanded to detect many planar cyclic compounds. Because nucleobases and derivatives/metabolites are involved in many physiological and pathological processes, this type of sensor may find applications in risk assessment of pathogenesis and therapeutics related to nucleic acid metabolism.

Responsive Fluorescent PNA Analogue as a Tool for Detecting G-quadruplex Motifs of Oncogenes and Activity of Toxic Ribosome-Inactivating Proteins

Fluorescent oligomers that are resistant to enzymatic degradation and report their binding to target oligonucleotides (ONs) by changes in fluorescence properties are highly useful in developing nucleic-acid-based diagnostic tools and therapeutic strategies. Here, we describe the synthesis and photophysical characterization of fluorescent peptide nucleic acid (PNA) building blocks made of microenvironment-sensitive 5-(benzofuran-2-yl)- and 5-(benzothiophen-2-yl)-uracil cores. The emissive monomers, when incorporated into PNA oligomers and hybridized to complementary ONs, are minimally perturbing and are highly sensitive to their neighboring base environment. In particular, benzothiophene-modified PNA reports the hybridization process with significant enhancement in fluorescence intensity, even when placed in the vicinity of guanine residues, which often quench fluorescence. This feature was used in the turn-on detection of G-quadruplex-forming promoter DNA sequences of human proto-oncogenes (c-myc and c-kit). Furthermore, the ability of benzothiophene-modified PNA oligomer to report the presence of an abasic site in RNA enabled us to develop a simple fluorescence hybridization assay to detect and estimate the depurination activity of ribosome-inactivating protein toxins. Our results demonstrate that this approach with responsive PNA probes will provide new opportunities to develop robust tools to study nucleic acids.

IMAGEtags: Quantifying mRNA Transcription in Real Time with Multiaptamer Reporters

Cell communications are essential to the organization, development, and maintenance of multicellular organisms. Much of this communication involves changes in RNA transcription and is dynamic. Most methods for studying transcription require interrupting the continuity of cellular function by sacrificing the communicating cells and capturing gene expression information by periodic sampling of individual cells or the population. The IMAGEtag technology to quantify RNA levels in living cells, demonstrated here in yeast, allows individual cells to be tracked over time as they respond to different environmental cues. IMAGEtags are short RNAs consisting of strings of a variable number of tandem aptamers that bind small-molecule ligands. The aptamer strings can vary in length and in configuration of aptamer constituents, such as to contain multiples of the same aptamer or two or more different aptamers that alternate in their occurrence. A minimum effective length is about five aptamers. The maximum length is undefined. The small-molecule ligands are enabled for imaging as fluorophore conjugates. For each IMAGEtag, two fluorophore conjugates are provided, which are FRET pairs. When a cell expresses an RNA containing an IMAGEtag sequence, the aptamers bind their ligands and bring the fluorophores into sufficiently close proximity to allow FRET. The background fluorescence of both fluorophores is minimal in the FRET channel. These features endow IMAGEtags with the sensitivity to report on mRNA expression levels in living cells.

Efficiency of [2 + 2] photodimerization of various stilbene derivatives within the DNA duplex scaffold

A DNA duplex was used as a scaffold to evaluate the intrinsic reactivity of [2 + 2] photodimerization between stilbene derivatives; the duplex pre-organizes the substrates avoiding the need for an association step. Unmodified stilbenes were first introduced at base-pairing positions on complementary DNA strands. The duplex was then irradiated with 340 nm UV light. HPLC analyses revealed that [2 + 2] photodimerization proceeded rapidly without side reactions. Thus, it was confirmed that the DNA duplex could be used as an ideal scaffold for [2 + 2] photodimerization of stilbenes. Next, we examined homo-photodimerization abilities of various stilbene derivatives. Homo-photodimerization of p-cyanostilbene, p-methylstilbazolium, and p-stilbazole occurred efficiently, whereas homo-photodimerization of p-dimethylaminostilbene and p-nitrostilbene did not proceed at all, probably because the reaction was quenched by dimethylamino and nitro groups. Time-dependent density functional theory calculations revealed that excitation energy was correlated with quantum yield. We further investigated hetero-photodimerization. These reactions were made possible by the use of two complementary oligodeoxyribonucleotides tethering different stilbene derivatives. Reactivities in hetero-photodimerization were highly dependent on the combination of derivatives. A high correlation was observed between the quantum yields and energy gaps of HOMO and LUMO between reactive derivatives. Unexpectedly, nitrostilbene, which was non-reactive in homo-photodimerization, cross-reacted with p-methylstilbazolium and p-stilbazole, both of which had close HOMO or LUMO with nitrostilbene. Evaluation of the intrinsic reactivity of homo- and hetero-photodimerization of stilbene derivatives was made possible by the use of DNA as a scaffold.

Sequence-Dependent Fluorescence of Cy3- and Cy5-Labeled Double-Stranded DNA

The fluorescent intensity of Cy3 and Cy5 dyes is strongly dependent on the nucleobase sequence of the labeled oligonucleotides. Sequence-dependent fluorescence may significantly influence the data obtained from many common experimental methods based on fluorescence detection of nucleic acids, such as sequencing, PCR, FRET, and FISH. To quantify sequence dependent fluorescence, we have measured the fluorescence intensity of Cy3 and Cy5 bound to the 5' end of all 1024 possible double-stranded DNA 5mers. The fluorescence intensity was also determined for these dyes bound to the 5' end of fixed-sequence double-stranded DNA with a variable sequence 3' overhang adjacent to the dye. The labeled DNA oligonucleotides were made using light-directed, in situ microarray synthesis. The results indicate that the fluorescence intensity of both dyes is sensitive to all five bases or base pairs, that the sequence dependence is stronger for double- (vs single-) stranded DNA, and that the dyes are sensitive to both the adjacent dsDNA sequence and the 3'-ssDNA overhang. Purine-rich sequences result in higher fluorescence. The results can be used to estimate measurement error in experiments with fluorescent-labeled DNA, as well as to optimize the fluorescent signal by considering the nucleobase environment of the labeling cyanine dye.

Self-assembled biosensor with universal reporter and dual-quenchers for detection of unlabelled nucleic acids

A novel biosensor with universal reporter and dual quenchers was developed for rapid, sensitive, selective, and inexpensive detection of unlabelled nucleic acids. The biosensor is based on a single-strand DNA stem-loop motif with an extended universal reporter-binding region, a G-base rich stem region, and a universal address-binding region. The self-assembly of these stem-loop probes with fluorescence labeled universal reporter and a universal address region conjugated to gold nanoparticles forms the basis of a biosensor for DNA or microRNA targets in solution. The introduction of dual quenchers (G-base quenching and gold surface plasmon resonance-induced quenching) significantly reduces the fluorescence background to as low as 12% of its original fluorescence intensity and hence enhances the detection limit to 0.01 picomoles without signal ampilication.

CTAB enhancement of FRET in DNA structures

The effect of cetyl-trimethylammonium bromide (CTAB) on enhancing the fluorescence resonance energy transfer (FRET) between two dye-conjugated DNA strands was studied using fluorescence emission spectroscopy and dynamic light scattering (DLS). For hybridized DNA where one strand is conjugated with a TAMRA donor and the other with a TexasRed acceptor, increasing the concentration of CTAB changes the fluorescence emission properties and improves the FRET transfer efficiency through changes in the polarity of the solvent, neutralization of the DNA backbone and micelle formation. For the DNA FRET system without CTAB, the DNA hybridization leads to contact quenching between TAMRA donor and TexasRed acceptor producing reduced donor emission and only a small increase in acceptor emission. At 50 µM CTAB, however, the sheathing and neutralization of the dye-conjugated dsDNA structure significantly reduces quenching by DNA bases and dye interactions, producing a large increase in FRET efficiency, which is almost four fold higher than without CTAB.

High-throughout identification of telomere-binding ligands based on photo-induced electron transfer

A fast and cost-effective method is developed for high-throughout screening G-quadruplex-binding ligands based on the photo-induced electron transfer.

Effects of non-CpG site methylation on DNA thermal stability: a fluorescence study

Cytosine methylation is a widespread epigenetic regulation mechanism. In healthy mature cells, methylation occurs at CpG dinucleotides within promoters, where it primarily silences gene expression by modifying the binding affinity of transcription factors to the promoters. Conversely, a recent study showed that in stem cells and cancer cell precursors, methylation also occurs at non-CpG pairs and involves introns and even gene bodies. The epigenetic role of such methylations and the molecular mechanisms by which they induce gene regulation remain elusive. The topology of both physiological and aberrant non-CpG methylation patterns still has to be detailed and could be revealed by using the differential stability of the duplexes formed between site-specific oligonucleotide probes and the corresponding methylated regions of genomic DNA. Here, we present a systematic study of the thermal stability of a DNA oligonucleotide sequence as a function of the number and position of non-CpG methylation sites. The melting temperatures were determined by monitoring the fluorescence of donor-acceptor dual-labelled oligonucleotides at various temperatures. An empirical model that estimates the methylation-induced variations in the standard values of hybridization entropy and enthalpy was developed.