Imaging Endogenous Metal Ions in Living Cells Using a DNAzyme-Catalytic Hairpin Assembly Probe

Nucleic-Acid Structures as Intracellular Probes for Live Cells

The chemical composition of cells at the molecular level determines their growth, differentiation, structure, and function. Probing this composition is powerful because it provides invaluable insight into chemical processes inside cells and in certain cases allows disease diagnosis based on molecular profiles. However, many techniques analyze fixed cells or lysates of bulk populations, in which information about dynamics and cellular heterogeneity is lost. Recently, nucleic-acid-based probes have emerged as a promising platform for the detection of a wide variety of intracellular analytes in live cells with single-cell resolution. Recent advances in this field are described and common strategies for probe design, types of targets that can be identified, current limitations, and future directions are discussed.

Low-Noise Nanopore Enables In-Situ and Label-Free Tracking of a Trigger-Induced DNA Molecular Machine at the Single-Molecular Level

Solid-state nanopores have shown special high potential in a label-free molecular assay, structure identification, and target-index at the single-molecular level, even though frustrating electrical baseline noise is still one of the major factors that limit the spatial resolution and signaling reliability of solid-state nanopores, especially in small target detection. Here we develop a significant and easy-operating noise-reduction approach via mixing organic solvents with high dielectric constants into a traditional aqueous electrolyte. The strategy is generally effective for pores made of different materials, such as the most commonly used conical glass (CGN) or SiN_x. While the mechanism should be multisourced, MD simulations suggest the noise reduction may partially arise from the even ionic distribution caused by the addition of higher dielectric species. Among all solvents experimentally tested, the two with the highest dielectric constants, formamide and methylformamide, exhibit the best noise reduction effect for target detection of CGN. The power spectral density at the low-frequency limit is reduced by nearly 3 orders with the addition of 20% formamide. Our work qualifies the reliability of solid-state nanopores into much subtler scales of detection, such as dsDNAs under 100 bp. As a practical example, bare CGN is innovatively employed to perform in-situ tracking of trigger-responsive DNA machine forming oligomers.

Catalytic Nucleic Acids: Biochemistry, Chemical Biology, Biosensors, and Nanotechnology

Since the initial discovery of ribozymes in the early 1980s, catalytic nucleic acids have been used in different areas. Compared with protein enzymes, catalytic nucleic acids are programmable in structure, easy to modify, and more stable especially for DNA. We take a historic view to summarize a few main interdisciplinary areas of research on nucleic acid enzymes that may have broader impacts. Early efforts on ribozymes in the 1980s have broken the notion that all enzymes are proteins, supplying new evidence for the RNA world hypothesis. In 1994, the first catalytic DNA (DNAzyme) was reported. Since 2000, the biosensor applications of DNAzymes have emerged and DNAzymes are particularly useful for detecting metal ions, a challenging task for enzymes and antibodies. Combined with nanotechnology, DNAzymes are key building elements for switches allowing dynamic control of materials assembly. The search for new DNAzymes and ribozymes is facilitated by developments in DNA sequencing and computational algorithms, further broadening our fundamental understanding of their biochemistry.

Accelerated DNAzyme-based fluorescent nanoprobe for highly sensitive microRNA detection in live cells

An accelerated DNAzyme-based fluorescent nanoprobe was developed for rapid and highly sensitive detection of microRNA in live cells.

Photocaged FRET nanoflares for intracellular microRNA imaging

Herein, we developed photocaged FRET nanoflares for spatiotemporal microRNA imaging in living cells. In other words, the probes will not work until they are exposed to UV light.

A self-powered 3D DNA walker with programmability and signal-amplification for illuminating microRNA in living cells

We construct a target-triggered, self-powered 3D DNA walker for achieving intracellular signal amplification and sensitive imaging analysis of microRNAs.

A photocontrolled and self-powered bipedal DNA walking machine for intracellular microRNA imaging

A photocontrolled and self-powered bipedal DNA walking machine for intracellular microRNA imaging has been reported.

Functional DNA Regulated CRISPR-Cas12a Sensors for Point-of-Care Diagnostics of Non-Nucleic-Acid Targets

Beyond its extraordinary genome editing ability, the CRISPR-Cas systems have opened a new era of biosensing applications due to its high base resolution and isothermal signal amplification. However, the reported CRISPR-Cas sensors are largely only used for the detection of nucleic acids with limited application for non-nucleic-acid targets. To realize the full potential of the CRISPR-Cas sensors and broaden their applications for detection and quantitation of non-nucleic-acid targets, we herein report CRISPR-Cas12a sensors that are regulated by functional DNA (fDNA) molecules such as aptamers and DNAzymes that are selective for small organic molecule and metal ion detection. The sensors are based on the Cas12a-dependent reporter system consisting of Cas12a, CRISPR RNA (crRNA), and its single-stranded DNA substrate labeled with a fluorophore and quencher at each end (ssDNA-FQ), and fDNA molecules that can lock a DNA activator for Cas12a-crRNA, preventing the ssDNA cleavage function of Cas12a in the absence of the fDNA targets. The presence of fDNA targets can trigger the unlocking of the DNA activator, which can then activate the cleavage of ssDNA-FQ by Cas12a, resulting in an increase of the fluorescent signal detectable by commercially available portable fluorimeters. Using this method, ATP and Na⁺ have been detected quantitatively under ambient temperature (25 °C) using a simple and fast detection workflow (two steps and <15 min), making the fDNA-regulated CRISPR system suitable for field tests or point-of-care diagnostics. Since fDNAs can be obtained to recognize a wide range of targets, the methods demonstrated here can expand this powerful CRISPR-Cas sensor system significantly to many other targets and thus provide a new toolbox to significantly expand the CRISPR-Cas system into many areas of bioanalytical and biomedical applications.

DNAzymes as Activity-Based Sensors for Metal Ions: Recent Applications, Demonstrated Advantages, Current Challenges, and Future Directions

Metal ions can be beneficial or toxic depending on their identity, oxidation state, and concentration. Therefore, the ability to detect and quantify different types of metal ions using portable sensors or in situ imaging agents is important for better environmental monitoring, in vitro medical diagnostics, and imaging of biological systems. While numerous metal ions in different oxidation states are present in the environment and biological systems, only a limited number of them can be detected effectively using current methods. In this Account, we summarize research results from our group that overcome this limitation by the development of a novel class of activity-based sensors based on metal-dependent DNAzymes, which are DNA molecules with enzymatic activity. First, we have developed an in vitro selection method to obtain DNAzymes from a large DNA library of up to 1015 sequences that can carry out cleavage of an oligonucleotide substrate only in the presence of a specific metal ion with high selectivity. Negative selection steps can further be used to improve the selectivity against potentially competing targets by removing sequences that recognize the competing metal ions. Second, we have developed a patented catalytic beacon method to transform the metal-dependent DNAzyme cleavage reaction into a turn-on fluorescent signal by attaching a fluorophore and quenchers to the DNAzyme complex. Because of the difference in the melting temperatures of DNA hybridization before and after metal-ion-dependent cleavage of the DNAzyme substrate, the fluorophore on the DNA cleavage product can be released from its quenchers to create a turn-on fluorescent signal. Because DNAzymes are easy to conjugate with other signaling moieties, such as gold nanoparticles, lanthanide-doped upconversion nanoparticles, electrochemical agents, and gadolinium complexes, these DNAzymes can also readily be converted into colorimetric sensors, upconversion luminescence sensors, electrochemical sensors, or magnetic resonance contrast agents. In addition to describing recent progress in developing and applying these metal ion sensors for environmental monitoring, point-of-care diagnostics, cellular imaging, and in vivo imaging in zebrafish, we summarize major advantages of this class of activity-based sensors. In addition to advantages common to most activity-based sensors, such as enzymatic turnovers that allow for signal amplification and the use of initial rates instead of absolute signals for quantification to avoid interferences from sample matrices, the DNAzyme-based sensors allow for in vitro selection to expand the method to almost any metal ion under a variety of conditions, negative selection to improve the selectivity against competing targets, and reselection of DNAzymes and combination of active and inactive variants to fine-tune the dynamic range of detection. The use of melting temperature differences to separate target binding from signaling moieties in the catalytic beacon method allows the use of different fluorophores and nanomaterials to extend the versatility and modularity of this sensing platform. Furthermore, sensing and imaging artifacts can be minimized by using an inactive mutant DNAzyme as a negative control, while spatiotemporal control of sensing/imaging can be achieved using optical, photothermal, and endogenous orthogonal caging methods. Finally, current challenges, opportunities, and future perspectives for DNAzymes as activity-based sensors are also discussed.

Enzyme-Mediated Endogenous and Bioorthogonal Control of a DNAzyme Fluorescent Sensor for Imaging Metal Ions in Living Cells

Bioorthogonal control of metal-ion sensors for imaging metal ions in living cells is important for understanding the distribution and fluctuation of metal ions. Reported here is the endogenous and bioorthogonal activation of a DNAzyme fluorescent sensor containing an 18-base pair recognition site of a homing endonuclease (I-SceI), which is found by chance only once in 7×1010  bp of genomic sequences, and can thus form a near bioorthogonal pair with I-SceI for DNAzyme activation with minimal effect on living cells. Once I-SceI is expressed inside cells, it cleaves at the recognition site, allowing the DNAzyme to adopt its active conformation. The activated DNAzyme sensor is then able to specifically catalyze cleavage of a substrate strand in the presence of Mg2+ to release the fluorophore-labeled DNA fragment and produce a fluorescent turn-on signal for Mg2+ . Thus I-SceI bioorthogonally activates the 10-23 DNAzyme for imaging of Mg2+ in HeLa cells.

An Autonomous Nonenzymatic Concatenated DNA Circuit for Amplified Imaging of Intracellular ATP

A robust ATP aptasensor has been successfully constructed for intracellular imaging via the autonomous nonenzymatic cascaded hybridization chain reaction (Ca-HCR) circuit. This compact aptasensor is easily assembled by integrating the sensing module and amplification module, and is furtherly introduced for selective adenosine triphosphate (ATP) assay and for the sensitive tracking of varied ATP expressions in living cells. The ATP-targeting aptamer-encoded sensing module can specifically recognize ATP and release the initiator strand for successively motivating the two-layered HCR (hybridization chain reaction) circuit via the FRET transduction mechanism. The synergistic reaction acceleration of the two HCRs contributes to the high signal gain (amplification efficiency of N²). The whole reaction process was modeled and simulated by MATLAB to deeply explore the underlying molecular reaction mechanism, implying that the cascade HCR is sufficient enough to guarantee the ATP-recognition and amplification processes. The Ca-HCR-amplified aptasensor shows high sensitivity and selectivity for in vitro ATP assay, and can monitor these varied ATP expressions in living cells via intracellular imaging technique. Furthermore, the present aptasensor can be easily extended for monitoring other low-abundance biomarkers, which is especially important for precisely understanding these related biological processes.

Programmable mismatch-fueled high-efficiency DNA signal converter

Herein, by directly introducing mismatched reactant DNA, high-reactivity and high-threshold enzyme-free target recycling amplification (EFTRA) is explored. The developed high-efficiency EFTRA (HEEFTRA) was applied as a programmable DNA signal converter, possessing higher conversion efficiency than the traditional one with perfect complement owing to the more negative reaction standard free energy (ΔG). Once traces of input target miRNA interact with the mismatched reactant DNA, amounts of ferrocene (Fc)-labeled output DNA could be converted via the EFTRA. Impressively, the Fc-labeled output DNA could be easily captured by the DNA tetrahedron nanoprobes (DTNPs) on the electrode surface to form triplex-forming oligonucleotide (TFO) at pH = 7.0 for sensitive electrochemical signal generation and the DTNPs could be regenerated at pH = 10.0, from which the conversion efficiency (N) will be accurately obtained, benefiting the selection of suitable mismatched bases to obtain high-efficiency EFTRA (HEEFTRA). As a proof of concept, the HEEFTRA as an evolved DNA signal converter is successfully applied for the ultrasensitive detection of miRNA-21, which gives impetus to the design of other signal converters with excellent efficiency for ultimate applications in sensing analysis, clinical diagnosis, and other areas.

Light-Activated Nanoprobes for Biosensing and Imaging

Fluorescent nanoprobes are indispensable tools to monitor and analyze biological species and dynamic biochemical processes in cells and living bodies. Conventional nanoprobes have limitations in obtaining imaging signals with high precision and resolution because of the interference with biological autofluorescence, off-target effects, and lack of spatiotemporal control. As a newly developed paradigm, light-activated nanoprobes, whose imaging and sensing activity can be remotely regulated with light irradiation, show good potential to overcome these limitations. Herein, recent research progress on the design and construction of light-activated nanoprobes to improve bioimaging and sensing performance in complex biological systems is introduced. First, recent innovative strategies and their underlying mechanisms for light-controlled imaging are reviewed, including photoswitchable nanoprobes and phototargeted nanosystems. Subsequently, a short highlight is provided on the development of light-activatable nanoprobes for biosensing, which offer possibilities for the remote control of biorecognition and sensing activity in a precise manner both temporally and spatially. Finally, perspectives and challenges in light-activated nanoprobes are commented.

Metal-Dependent DNAzymes for the Quantitative Detection of Metal Ions in Living Cells: Recent Progress, Current Challenges, and Latest Results on FRET Ratiometric Sensors

Many different metal ions are involved in various biological functions including metallomics and trafficking, and yet there are currently effective sensors for only a few metal ions, despite the first report of metal sensors for calcium more than 40 years ago. To expand upon the number of metal ions that can be probed in biological systems, we and other laboratories employ the in vitro selection method to obtain metal-specific DNAzymes with high specificity for a metal ion and then convert these DNAzymes into fluorescent sensors for these metal ions using a catalytic beacon approach. In this Forum Article, we summarize recent progress made in developing these DNAzyme sensors to probe metal ions in living cells and in vivo, including several challenges that we were able to overcome for this application, such as DNAzyme delivery, spatiotemporal control, and signal amplification. Furthermore, we have identified a key remaining challenge for the quantitative detection of metal ions in living cells and present a new design and the results of a Förster resonance energy transfer (FRET)-based DNAzyme sensor for the ratiometric quantification of Zn2+ in HeLa cells. By converting existing DNAzyme sensors into a ratiometric readout without compromising the fundamental catalytic function of the DNAzymes, this FRET-based ratiometric DNAzyme design can readily be applied to other DNAzyme sensors as a major advance in the field to develop much more quantitative metal-ion probes for biological systems.

In situ Analysis of Cancer Cells Based on DNA Signal Amplification and DNA Nanodevices

Cancer is a global disease which has been disturbing researchers in medicine and seriously threatens patients' health and lifetime around the world in the past several decades. Due to the characteristics of cancer cells, such as uncontrollable cell proliferation, cell invasion and metastasis to surrounding tissues, lower grade of differentiation, higher telomerase activity and others, it has been one of the most usual lethal factors, next to heart disease in incidence. Cancer mortality can be decreased by early diagnosis, and the people who with treatment at an early stage have an obvious improved survival rate. Consequently, early detection is significant for better understanding the pathogenesis of cancer and improving the prognosis of patients. In situ detection technique is a vital tool for imaging and cellular pathology research, which can provide effective information about tumor markers in the early cancer detection. In view of low expression of most tumor markers in the early stage of cancers, detection techniques based on DNA signal amplification and DNA nanodevices can provide a strong support for the diagnosis and detection of cancers. In this review, we summarize the research progress of different analytical techniques for detecting various tumor markers that have been reported in recent years. We compare different DNA amplification and nanodevices, then provide guidance and suggestions for better understanding in situ analysis of cancer cells.

Applications of Catalytic Hairpin Assembly Reaction in Biosensing

Nucleic acids are considered as perfect programmable materials for cascade signal amplification and not merely as genetic information carriers. Among them, catalytic hairpin assembly (CHA), an enzyme-free, high-efficiency, and isothermal amplification method, is a typical example. A typical CHA reaction is initiated by single-stranded analytes, and substrate hairpins are successively opened, resulting in thermodynamically stable duplexes. CHA circuits, which were first proposed in 2008, present dozens of systems today. Through in-depth research on mechanisms, the CHA circuits have been continuously enriched with diverse reaction systems and improved analytical performance. After a short time, the CHA reaction can realize exponential amplification under isothermal conditions. Under certain conditions, the CHA reaction can even achieve 600 000-fold signal amplification. Owing to its promising versatility, CHA is able to be applied for analysis of various markers in vitro and in living cells. Also, CHA is integrated with nanomaterials and other molecular biotechnologies to produce diverse readouts. Herein, the varied CHA mechanisms, hairpin designs, and reaction conditions are introduced in detail. Additionally, biosensors based on CHA are presented. Finally, challenges and the outlook of CHA development are considered.

Exonuclease-assisted target recycling for ultrasensitive electrochemical detection of microRNA at vertically aligned carbon nanotubes

As an important biomarker for early disease diagnosis, microRNA-21 (miRNA-21) has attracted considerable attention owing to its accurate detection. Herein we combine the one-step biorecognition reaction at a vertically aligned nanostructure-based biosensor with the T7 exonuclease (Exo)-assisted target recycling to develop a novel electrochemical bioassay method for miRNA-21 detection. The vertically aligned nanointerface is constructed through the covalent attachment of terminally carboxylated single-walled carbon nanotubes (SWCNTs) at an aryldiazonium salt-modified electrode, which enables the noncovalent adsorption of a ferrocene-labeled single-stranded signal DNA to obtain the biosensor. Upon its incubation with a target miRNA-21 solution, DNA/RNA hybridized duplexes will form and release from the electrode surface, leading to the corresponding electrochemical signal decrease of the biosensor. Moreover, this biorecognition reaction can also trigger the T7 Exo-assisted target recycling to achieve great signal amplification. Together with the highly efficient biorecognition and excellent electron transfer promotion at the vertically aligned SWCNTs, this biosensor exhibits a wide linear range varying from 0.01 to 100 pM and a low detection limit down to 3.5 fM. Considering its obvious performance superiority and convenient manipulations, this vertically aligned SWCNT-based electrochemical biosensing method has extensive potential for practical applications.

Avenues Toward microRNA Detection In Vitro: A Review of Technical Advances and Challenges

Over the decades, the biological role of microRNAs (miRNAs) in the post-transcriptional regulation of gene expression has been discovered in many cancer types, thus initiating the tremendous expectation of their application as biomarkers in the diagnosis, prognosis, and treatment of cancer. Hence, the development of efficient miRNA detection methods in vitro is in high demand. Extensive efforts have been made based on the intrinsic properties of miRNAs, such as low expression levels, high sequence homology, and short length, to develop novel in vitro miRNA detection methods with high accuracy, low cost, practicality, and multiplexity at point-of-care settings. In this review, we mainly summarized the newly developed in vitro miRNA detection methods classified by three key elements, including biological recognition elements, additional micro-/nano-materials and signal transduction/readout elements, their current challenges and further applications are also discussed.

A Novel Small RNA-Cleaving Deoxyribozyme with a Short Binding Arm

Deoxyribozymes capable of catalyzing sequence-specific RNA cleavage have found broad applications in biotechnology, DNA computing and environmental sensing. Among these, deoxyribozyme 8–17 is the most common small DNA motif capable of catalyzing RNA cleavage. However, the extent to which other DNA molecules with similar catalytic motifs exist remains elusive. Here we report a novel RNA-cleaving deoxyribozyme called 10–12opt that functions with an equally small catalytic motif and an unusually short binding arm. This deoxyribozyme contains a 14-nucleotide catalytic core that preferentially catalyzes RNA cleavage at UN dinucleotide junctions (k_obs = 0.9 h⁻¹ for UU cleavage). Surprisingly, the left binding arm contains only three nucleotides and forms two canonical base pairs with the RNA substrate. Mutational analysis reveals that a riboguanosine residue 3-nucleotide downstream of cleavage site must not form canonical base pairing for the optimal catalysis, and this nucleobase likely participates in catalysis with its carbonyl O6 atom. Furthermore, we demonstrate that deoxyribozyme 10–12opt can be utilized to cleave certain microRNA sequences which are not preferentially cleaved by 8–17. Together, these results suggest that this novel RNA-cleaving deoxyribozyme forms a distinct catalytic structure than 8–17 and that sequence space may contain additional examples of DNA molecules that can cleave RNA at site-specific locations.

Molecular Engineering of Functional Nucleic Acid Nanomaterials toward In Vivo Applications

Recent advances in nanotechnology and engineering have generated many nanomaterials with unique physical and chemical properties. Over the past decade, numerous nanomaterials are introduced into many research areas, such as sensors for environmental monitoring, food safety, point-of-care diagnostics, and as transducers for solar energy transfer. Meanwhile, functional nucleic acids (FNAs), including nucleic acid enzymes, aptamers, and aptazymes, have attracted major attention from the biomedical community due to their unique target recognition and catalytic properties. Benefiting from the recent progress of molecular engineering strategies, the physicochemical properties of nanomaterials are endowed by the target recognition and catalytic activity of FNAs in the presence of a target analyte, resulting in numerous smart nanoprobes for diverse applications including intracellular imaging, drug delivery, in vivo imaging, and tumor therapy. This progress report focuses on the recent advances in designing and engineering FNA-based nanomaterials, highlighting the functional outcomes toward in vivo applications. The challenges and opportunities for the future translation of FNA-based nanomaterials into clinical applications are also discussed.

Exploration of solid-state nanopores in characterizing reaction mixtures generated from a catalytic DNA assembly circuit

Recent advances have proven that using solid-state nanopores is a promising single molecular technique to enrich the DNA assembly signaling library. Other than using them for distinguishing structures, here we innovatively adapt solid-state nanopores for use in analyzing assembly mixtures, which is usually a tougher task for either traditional characterization techniques or nanopores themselves. A trigger induced DNA step polymerization (SP-CHA), producing three-way-DNA concatemers, is designed as a model. Through counting and integrating the translocation-induced current block when each concatemer passes through a glass conical glass nanopore, we propose an electrophoresis-gel like, but homogeneous, quantitative method that can comprehensively profile the "base-pair distribution" of SP-CHA concatemer mixtures. Due to the higher sensitivity, a number of super long concatemers that were previously difficult to detect via gel electrophoresis are also revealed. These ultra-concatemers, longer than 2 kbp, could provide a much enhanced signal-to-noise ratio for nanopores and are thus believed to be more accurate indicators for the existence of a trigger, which may be of benefit for further applications, such as molecular machines or biosensors.

Principles and Applications of Nucleic Acid Strand Displacement Reactions

Dynamic DNA nanotechnology, a subfield of DNA nanotechnology, is concerned with the study and application of nucleic acid strand-displacement reactions. Strand-displacement reactions generally proceed by three-way or four-way branch migration and initially were investigated for their relevance to genetic recombination. Through the use of toeholds, which are single-stranded segments of DNA to which an invader strand can bind to initiate branch migration, the rate with which strand displacement reactions proceed can be varied by more than 6 orders of magnitude. In addition, the use of toeholds enables the construction of enzyme-free DNA reaction networks exhibiting complex dynamical behavior. A demonstration of this was provided in the year 2000, in which strand displacement reactions were employed to drive a DNA-based nanomachine (Yurke, B.; et al. Nature 2000, 406, 605-608). Since then, toehold-mediated strand displacement reactions have been used with ever increasing sophistication and the field of dynamic DNA nanotechnology has grown exponentially. Besides molecular machines, the field has produced enzyme-free catalytic systems, all DNA chemical oscillators and the most complex molecular computers yet devised. Enzyme-free catalytic systems can function as chemical amplifiers and as such have received considerable attention for sensing and detection applications in chemistry and medical diagnostics. Strand-displacement reactions have been combined with other enzymatically driven processes and have also been employed within living cells (Groves, B.; et al. Nat. Nanotechnol. 2015, 11, 287-294). Strand-displacement principles have also been applied in synthetic biology to enable artificial gene regulation and computation in bacteria. Given the enormous progress of dynamic DNA nanotechnology over the past years, the field now seems poised for practical application.

Amplified MicroRNA Detection and Intracellular Imaging Based on an Autonomous and Catalytic Assembly of DNAzyme

Abnormal microRNAs (miRNAs) expression is demonstrated to associate with various important biological processes, including tumorigenesis, metastasis, and progression. Given the low miRNA expression at the earlier stage of diseases, its amplified detection still requires more efforts. Inspired by the two-stage arithmetic amplifier of electric devices, we reported an autonomous and catalytic assembly of DNAzyme strategy by integrating a DNAzyme biocatalyst and catalytic hairpin assembly (CHA) circuit. Here the catalytically inactive DNAzyme subunits were respectively grafted into these metastable CHA hairpin reactants that were kinetically impeded without false cross-hybridizations. The target catalyzed the nonenzymatic CHA-mediated successive assembly of dumbbell-like bis-DNAzyme nanostructures, leading to the efficient DNAzyme-mediated cleavage of fluorophore/quencher-modified substrate and to the generation of an amplified fluorescence signal. The present CHA-DNAzyme amplifier can be employed as a versatile and general sensing platform for analyzing other analytes (e.g., miRNA) by introducing a sensing module into the present system. Moreover, the homogeneous CHA-DNAzyme method could realize the sensitive intracellular miRNA imaging in living cells, which is attributed to the inherently synergistic amplification property between DNAzyme and CHA reactions. Given the attractive analytical features of the autonomous CHA-DNAzyme system, the present strategy shows great promise for analyzing additional different analytes in clinical research fields.

Microchip electrophoresis based multiplexed assay for silver and mercury ions simultaneous detection in complex samples using a stirring bar modified with encoded hairpin probes for specific extraction

It is crucially important to rapidly, simultaneously, and sensitively determine trace amounts of heavy metal ions in complex samples. Herein, a stirring bar modified with two kinds of encoded hairpin DNA probes (H₀ and H₀') was used in a multiplexed strategy allowing for specific extraction of Hg²⁺ and Ag⁺ coupled to microchip electrophoresis (MCE) separation and LED induced fluorescence (LIF) detection. The extraction step utilizes stir bars, which are functionalized with designed hairpin DNA probes (H₀ with TT and H₀' with CC mismatches in stems). This allows the specific capture of Hg²⁺ and Ag⁺ through CAg⁺C and THg²⁺T interactions. These complexes are then enzymatically degraded by the action of exonuclease III (Exo III). The ions released during this enzymatic reaction can initiate a new cycle of interactions with hairpin structures and enzymatic reactions and so on. This cyclic step is specific to the presence of Hg²⁺ and Ag⁺ and represents the first round of amplification of the presence of the selected ions. The resulting single strand DNAs on the stirring bars after enzymatic degradation were used in the second step as primers to trigger the catalytic hairpin assembly (CHA) in the presence of a couple of hairpin structures in solution. Such a reaction allows producing duplexes that can be monitored by MCE-LIF. The fluorescence intensity of CHA products (I_P) increased and that of hairpin DNAs (I_R) decreased with the increase of target concentrations. The signal ratios (I_P/I_R and I_P'/I_R') consisted of targets. The assay was employed for Hg²⁺ and Ag⁺ detection in several mediums including water, milk, and fish samples with complex matrices. The results showed that the assay could avoid matrix interference to increase the sensitivity. Therefore, the multiplexed assay was ideal to simultaneously and quickly detect metal ions in complex samples.

A design for the photoelectrochemical detection of miRNA-221 based on a tungsten diselenide–cysteine–dopamine nanoprobe coupled with mismatched catalytic hairpin assembly target recycling with ultra-low background noise

A strategy for the photoelectrochemical detection of miRNA with ultra-low background noise was developed using tungsten diselenide–cysteine–dopamine (WSe₂/Cys/DA) as a nanoprobe coupled with mismatched catalytic hairpin assembly target recycling.

Temperature-Robust DNAzyme Biosensors Confirming Ultralow Background Detection

Catalytic DNA/RNA, such as DNAzyme, has been widely adopted to construct biosensors, especially for metal ion analysis. However, traditional DNAzyme biosensors still suffer from fluctuating and relatively high background. Herein, we proposed a temperature-robust DNAzyme, conferring ultralow background in various temperatures, thus leading to highly sensitive and robust detection of metal ions. Instead of labeling substrate to directly output fluorescence signal, our proposed DNAzyme biosensor utilized a sequential detection process with a couple of proximity fluorescent probes, confirming very low background regardless of the conditions of cleavage reaction. This sequential DNAzyme biosensor conferred a signal to background ratio over 20 when the temperature of the catalytic reaction ranged from 20 to 41 °C. Benefitting from its ultralow background, it could confer a detection limit of 0.22 nM, which ranked as one of the highest sensitivity levels among DNAzyme-based fluorescent biosensors. This DNAzyme biosensor was over 6000 times more selective for Pb²⁺ against the most active interfering metal ions, Zn²⁺. Further, it has been successfully applied for analyzing lead pollution in tap water and eggs, with total recoveries ranging from 87% to 114%. This facile, simple, and effective design strategy would significantly improve the detection performance of DNAzyme biosensors, thus facilitating its practical applications for both food safety analysis and environment monitoring.

Lighting Up Fluorescent Silver Clusters via Target-Catalyzed Hairpin Assembly for Amplified Biosensing

Isothermal enzyme-free nucleic acid circuits have been developed for carrying out diverse functions ranging from dictate biocomputing to amplified biosensing. Catalytic hairpin assembly (CHA), the catalyzed cross-opening of two hairpin substrates by an initiator, has attracted increasing attention because of its facile design and high amplification capacity. The complex labeling and frequent photobleaching of a conventional fluorescent CHA biosensor still remains a challenge that needs to be solved. Herein, we constructed a new label-free and enzyme-free isothermal CHA lighting up AgNCs strategy for amplified nucleic acid assay by integrating the interfacially and spatially sensitive feature of DNA-templated fluorescent silver nanoclusters (DNA-AgNCs) and the high signal amplification capability of the CHA circuit. In this strategy, one polyguanine-grafted hairpin and the other AgNCs-capturing hairpin were engineered as assembly constitutes, which were kinetically impeded from cross-hybridizations without target. However, in the presence of target, the CHA-catalyzed assembly of two functional hairpins was successively progressed and concomitantly accompanied by an efficient accommodation of AgNCs to the polyguanine-elongated dsDNA product, leading to highly efficient AgNCs-lighting up and to the generation of an amplified fluorescence signal. As a simple mix-and-detect strategy, the isothermal enzyme-free CHA-mediated lighting up AgNCs (CHA-AgNCs) system provided a facile visualization way for amplified detection of DNA with a detection limit of 20 pM, which was comparable to or even better than some enzyme-involved amplification methods. The homogeneous CHA-AgNCs system can be used as a general sensing platform and be easily adapted for analyzing other biologically important analytes, for example, microRNA (miRNA), by introducing the sensing module consisting of an auxiliary hairpin through an easy-to-integrate procedure. By taking advantage of the signal amplification features of CHA and the robust AgNCs-lighting up procedure, we anticipate that the CHA-lighting up AgNCs system can provide an important tool for biomedicine and bioimaging applications and thus should hold great promise in clinical diagnoses and treatment fields.

Optical Control of Metal Ion Probes in Cells and Zebrafish Using Highly Selective DNAzymes Conjugated to Upconversion Nanoparticles

Spatial and temporal distributions of metal ions in vitro and in vivo are crucial in our understanding of the roles of metal ions in biological systems, and yet there is a very limited number of methods to probe metal ions with high space and time resolution, especially in vivo. To overcome this limitation, we report a Zn²⁺-specific near-infrared (NIR) DNAzyme nanoprobe for real-time metal ion tracking with spatiotemporal control in early embryos and larvae of zebrafish. By conjugating photocaged DNAzymes onto lanthanide-doped upconversion nanoparticles (UCNPs), we have achieved upconversion of a deep tissue penetrating NIR 980 nm light into 365 nm emission. The UV photon then efficiently photodecages a substrate strand containing a nitrobenzyl group at the 2'-OH of adenosine ribonucleotide, allowing enzymatic cleavage by a complementary DNA strand containing a Zn²⁺-selective DNAzyme. The product containing a visible FAM fluorophore that is initially quenched by BHQ1 and Dabcyl quenchers is released after cleavage, resulting in higher fluorescent signals. The DNAzyme-UCNP probe enables Zn²⁺ sensing by exciting in the NIR biological imaging window in both living cells and zebrafish embryos and detecting in the visible region. In this study, we introduce a platform that can be used to understand the Zn²⁺ distribution with spatiotemporal control, thereby giving insights into the dynamical Zn²⁺ ion distribution in intracellular and in vivo models.

A Facile, Label-Free, and Universal Biosensor Platform Based on Target-Induced Graphene Oxide Constrained DNA Dissociation Coupling with Improved Strand Displacement Amplification

In this work, we report a low-cost and easy operation biosensor platform capable of detection of various analytes with high sensitivity and good selectivity. By ingeniously assigning the specific aptamer into a primer-template integrated DNA template, and using monolayer graphene oxide as a reversible and nonspecific inhibitor, the simple biosensor platform is set up. Without a target, the DNA template is constrained by the graphene oxide sheet and results in low signal. In the presence of a target, the constrained DNA template is released from the graphene oxide surface via a target-induced aptamer conformational change, and further amplified through the improved strand displacement amplification reaction. Therefore, the target detection is simply converted to DNA detection, and a correlation between target concentration and fluorescence signal can be set up. As a result, dozens-fold signal enhancement, high sensitivity, good selectivity, and potential practicability are achieved in target detection. More importantly, the proposed biosensor platform is versatile, meaning that it can greatly facilitate the detection of a variety of analytes. Due to the low cost and easy availability of sensing materials, and the elimination of tedious detection operations, we believe that this simple and universal biosensor platform can find wide applications in biological assay and environment monitoring.

RNA-Cleaving DNAzymes: Old Catalysts with New Tricks for Intracellular and In Vivo Applications

DNAzymes are catalytically active DNA molecules that are normally isolated through in vitro selection methods, among which RNA-cleaving DNAzymes that catalyze the cleavage of a single RNA linkage embedded within a DNA strand are the most studied group of this DNA enzyme family. Recent advances in DNA nanotechnology and engineering have generated many RNA-cleaving DNAzymes with unique recognition and catalytic properties. Over the past decade, numerous RNA-cleaving, DNAzymes-based functional probes have been introduced into many research areas, such as in vitro diagnostics, intracellular imaging, and in vivo therapeutics. This review focus on the fundamental insight into RNA-Cleaving DNAzymes and technical tricks for their intracellular and in vivo applications, highlighting the recent progress in the clinical trial of RNA-Cleaving DNAzymes with selected examples. The challenges and opportunities for the future translation of RNA-cleaving DNAzymes for biomedicine are also discussed.

Plasmon Coupling Effect-Enhanced Imaging of Metal Ions in Living Cells Using DNAzyme Assembled Core-Satellite Structures

We demonstrate a core-satellite plasmonic nanoprobe assembled via metal-ion-dependent DNA-cleaving DNAzyme linker for imaging intercellular metal ion based on plasmon coupling effect at a single-particle level. As metal ions are present in the system, the DNAzyme linker will be cleaved, and thus, disassembly of the core-satellite nanoprobes occurs, which results in distinct blue shift of the scattering spectra of Au core-satellite probes and naked color change of the scattering light. This change in scattering spectra has been supported by theoretical simulations. As a proof of concept, sensitive detection of Cu²⁺ with a limit of detection down to 67.2 pM has been demonstrated. The nanoprobes have been further utilized for intracellular Cu²⁺ imaging in living cells. The results demonstrate that the present strategy provides a promising platform for detection and imaging of metal ions in living cells and could be potentially applied to imaging other interesting target molecules simply by substituting the oligonucleotide sequence.

Rational construction of a DNA nanomachine for HIV nucleic acid ultrasensitive sensing

HIV nucleic acids, one kind of significant biomarker, play an important role in fundamental studies and clinical diagnosis. Importantly, the early accurate diagnosis for HIV nucleic acids at ultralow concentrations can potentially extend the life of patients. In the current work, we developed a DNA nanomachine on gold nanoparticles (AuNPs) coupling rolling circle amplification and DNA walker cascade amplification for ultrasensitive detection of HIV nucleic acids. This DNA nanomachine sensing strategy exhibits a significantly low detection limit down to 1.46 fM. Furthermore, this DNA nanomachine biosensor is capable of detecting target DNA in real samples because of its high selectivity and sensitivity. Moreover, the DNA nanomachine biosensor is capable of discriminating single-base mismatch lower than 3.5 pM. The results showed that this DNA nanomachine biosensor has the potential for biomedical studies and clinical applications.

Biocomputing for Portable, Resettable, and Quantitative Point-of-Care Diagnostics: Making the Glucose Meter a Logic-Gate Responsive Device for Measuring Many Clinically Relevant Targets

It is recognized that biocomputing can provide intelligent solutions to complex biosensing projects. However, it remains challenging to transform biomolecular logic gates into convenient, portable, resettable and quantitative sensing systems for point-of-care (POC) diagnostics in a low-resource setting. To overcome these limitations, the first design of biocomputing on personal glucose meters (PGMs) is reported, which utilizes glucose and the reduced form of nicotinamide adenine dinucleotide as signal outputs, DNAzymes and protein enzymes as building blocks, and demonstrates a general platform for installing logic-gate responses (YES, NOT, INHIBIT, NOR, NAND, and OR) to a variety of biological species, such as cations (Na+ ), anions (citrate), organic metabolites (adenosine diphosphate and adenosine triphosphate) and enzymes (pyruvate kinase, alkaline phosphatase, and alcohol dehydrogenases). A concatenated logical gate platform that is resettable is also demonstrated. The system is highly modular and can be generally applied to POC diagnostics of many diseases, such as hyponatremia, hypernatremia, and hemolytic anemia. In addition to broadening the clinical applications of the PGM, the method reported opens a new avenue in biomolecular logic gates for the development of intelligent POC devices for on-site applications.