Glucose: Detection and analysis

Associations of drinking rainwater with macro-mineral intake and cardiometabolic health: a pooled cohort analysis in Bangladesh, 2016-2019

This study explores the associations of drinking rainwater with mineral intake and cardiometabolic health in the Bangladeshi population. We pooled 10030 person-visit data on drinking water sources, blood pressure (BP) and 24-h urine minerals. Fasting blood glucose (FBG) was measured in 3724 person-visits, and lipids in 1118 person-visits. We measured concentrations of sodium (Na), potassium (K), calcium (Ca) and magnesium (Mg) in 253 rainwater, 935 groundwater and 130 pond water samples. We used multilevel linear or gamma regression models with participant-, household- and community-level random intercepts to estimate the associations of rainwater consumption with urine minerals and cardiometabolic biomarkers. Rainwater samples had the lowest concentrations of Na, K, Ca and Mg. Rainwater drinkers had lower urine minerals than coastal groundwater drinkers: -13.42 (95% CI: -18.27, -8.57) mmol Na/24 h, -2.00 (95% CI: -3.16, -0.85) mmol K/24 h and -0.57 (95% CI: -1.02, -0.16) mmol Mg/24 h. The ratio of median 24-hour urinary Ca for rainwater versus coastal groundwater drinkers was 0.72 (95% CI: 0.64, 0.80). Rainwater drinkers had 2.15 (95% CI: 1.02, 3.27) mm Hg higher systolic BP, 1.82 (95% CI: 1.19, 2.54) mm Hg higher diastolic BP, 0.59 (95% CI: 0.17, 1.01) mmol/L higher FBG and -2.02 (95% CI: -5.85, 0.81) mg/dl change in high-density lipoprotein cholesterol compared with the coastal groundwater drinkers. Drinking rainwater was associated with worse cardiometabolic health measures, which may be due to the lower intake of salubrious Ca, Mg and K.

A new sensitive spectrophotometric method for determination of saliva and blood glucose

There is an increasing need for accurate and inexpensive glucometers as the world moves toward personalized medicine. Among the existing technologies, photometric based devices are more desired due to the cost-effectiveness, ease-of-use and the potential to be adopted in the smart-phone technology for remote sensing and self-monitoring purposes. However, the accuracy, precision, and reproducibility of the results of these devices are heavily dependent on the details of the chosen glucose measuring method. Considering the delicate problems with the current spectrophotometric methods, a new method was developed for more precise, accurate, and fast measurement of blood glucose via the coupled reactions of glucose oxidase and peroxidase using 4-[(4-Hydroxy-3-methoxyphenyl) azo]-benzenesulfonic acid (GASA) as the substrate. Stability of GASA and its oxidized products along with its direct and fast consumption by peroxidase, made it possible to determine blood glucose concentration in <20 s with high reproducibility. The low detection limit of GASA method (0.36 mg dL^-1) with a linear range from 0.36 to 399.6 mg.dL^-1 also allowed determination of salivary glucose concentration (SGC). As compared with the blood samples, the SGC results were more dispersed, especially for the diabetic participants, assumingly due to the diverse nature of salivary samples. However, a good correlation coefficient of 0.81 for non-diabetic individuals showed that it is accurate enough to recognize non-diabetic from diabetic condition. Results of this study disclose the potential application of GASA method as a reliable alternative for the current spectrophotometric methods with the ability to be adopted in miniaturized glucometers.

Development of a RP-HPLC method for determination of glucose in Shewanella oneidensis cultures utilizing 1-phenyl-3-methyl-5-pyrazolone derivatization

A method was developed and validated for low-level detection of glucose. The method involves quantitation of glucose though derivitization with 1-phenyl-3-methyl-5-pyrazolone (PMP) and HPLC-DAD analysis. The developed method was found to be accurate and robust achieving detection limits as low as 0.09 nM. The applicability of the method was tested against microbial samples with glucose acting as a carbon fuel source. The method was shown to be able to accurately discriminate and quantify PMP-glucose derivatives within Shewanella oneidensis MR-1 samples. The method proved capable at examining glucose usage during the early hours of microbial growth, with detectable usage occurring as early as two hours. S. oneidensis cultures were found to grow more effectively in the presence of oxygen which coincided with more efficient glucose usage. Glucose usage further increased in the presence of competing electron acceptors. The rate at which S. oneidensis reached exponential growth was affected by the presence of ferric iron under microaerobic conditions. Such samples reached exponential growth approximately two hours sooner than aerobic samples.

Ultra-small and biocompatible platinum nanoclusters with peroxidase-like activity for facile glucose detection in real samples

The highly sensitive glucose detection based on the peroxidase-like properties of nanoclusters has been gained great interest. In this work, Pericarpium Citri Reticulatae polysaccharide (PCRP) stabilized platinum nanoclusters (Pt-PCRP NCs) were prepared by a green method in which potassium tetrachloroplatinate and PCRP were simply mixed without addition of other agents. Platinum nanoclusters (Pt NCs) had ultra-small size of 1.26 ± 0.34 nm. The hydrodynamic size of Pt-PCRP NCs was 29.7 nm, and zeta potential of which was -12.0 mV. Pt-PCRP NCs showed high biocompatibility toward HeLa cells and red blood cells. In addition, Pt-PCRP NCs catalyzed the decomposition of H₂O₂ to produce •OH, which further oxidized colorless 3,3'5,5'-tetramethylbenzidine (TMB) to blue oxidized 3,3',5,5'-tetramethylbenzidine (oxTMB), exhibiting peroxidase-like property. The kinetics followed the Michaelis-Menten equation. More importantly, the colorimetric method for glucose detection using Pt-PCRP NCs had high selectivity and low detection limit for 0.38 μM. The established method based on Pt-PCRP NCs was used to precisely detect glucose detection in human serum, saliva, and sweat. Taken together, the prepared ultra-small and biocompatible Pt-PCRP NCs have good potential glucose applications in clinical diagnosis in the future.

Electrochemical non-enzymatic glucose sensors: recent progress and perspectives

This review summarizes recent advances in the development of electrocatalysts for non-enzymatic glucose detection. The sensing mechanism and influencing factors are discussed, and the perspectives and challenges are also addressed.

Suitability of stationary phase for LC analysis of biomolecules

Biologically active compounds such as carotenoids/isoprenoids, vitamins, steroids, saponins, sugars, long chain fatty acids, and amino acids play a very important role in coordinating functions in living organisms. Determination of those substances is indispensable in advanced biological sciences. Engineered stationary phase in LC for the analysis of biomolecules has become easier with the development of chromatographic science. In general, C₁₈ column is being used for routine analysis but specific columns are being used for specific molecule. Monolithic columns are found to have higher efficiency than normal column. Among recent introduction, triacontyl stationary phases, designed for the separation of carotenoid isomers, are widely used for the estimation of carotenoids. In comparison to conventional C₁₈ phases, C₃₀ phases exhibited superior shape selectivity for the separation of isomers of carotenoids. It is also found useful for better elution and analysis of tocopherols, vitamin K, sterols, and fatty acids. Vitamin K, E, and their isomers are also successfully resoluted and analyzed by using C₃₀ column. Amino bonded phase column is specifically used for better elution of sugars, whereas phenyl columns are suitable for the separation and analysis of curcuminoids and taxol. Like triacontyl stationary phase, pentafluorophenyl columns are also used for the separation and analysis of carotenoids. Similarly, HILIC column are best suited for sugar analysis. All the stationary phases are made possible to resolute and analyze the target biomolecules better, which are the future of liquid chromatography. The present article focuses on the differential interaction between stationary phase and target biomolecules. The applicability of these stationary phases are reported in different matrices.

Targeted Heating of Enzyme Systems Based on Photothermal Materials

This study demonstrates that the enzymatic reaction rate can be increased significantly by targeted heating of the microenvironment around the enzyme, while maintaining the reaction system at environmental temperature. Enzyme molecules are covalently attached to the surface of Fe₃ O₄ @reduced graphite oxide (rGO). Under visible-light irradiation, the reaction rate catalyzed by the enzyme-Fe₃ O₄ @rGO system is clearly enhanced relative to that of the free enzyme and a mixture of free enzyme and Fe₃ O₄ @rGO. This local heating mechanism contributes to promotion of the enzymatic reactions of the targeted heating of the enzyme (THE) system, which has been validated by using different enzymes, including lipase, glucose oxidase, and organophosphorus hydrolase. These results indicate that targeted heating of the catalytic centers has the same effect on speeding up reactions as that of traditional heating methods, which treat the whole reaction system. As an example, it is shown that the THE system promotes the sensitivity of an enzyme screen-printed electrode by 14 times at room temperature, which implies that the THE system can be advantageous in improving enzyme efficiency, especially if heating the entire system is impossible or could lead to degradation of substrates or damage of components, such as in vitro bioanalysis of frangible molecules or in vivo diagnosis.

Nutritional assessment, phytochemical composition and antioxidant analysis of the pulp and seed of medjool date grown in Mexico

The aim of this study was the characterization of fatty acids, antioxidant activity, some physical properties, nutrient content, sugars, and minerals in the pulp and seeds of the date cultivar 'Medjool' (Phoenix dactylifera L.) grown in Mexico. The samples were obtained at maturity (Tamar) in the 2017 harvest season in the valleys of San Luis Rio Colorado and Mexicali, Mexico. The following average values were obtained on a % dry weight basis for pulp and seeds, respectively: protein, 3.14% and 4.84%; lipids, 0.75% and 9.94%; fiber, 6.34% and 66.79%; total sugars, 75.32% and 5.88%; reducing sugars, 70.26% and 4.40%; and sucrose, 5.06% and 1.46%. Analysis of the minerals revealed that the most abundant elements for the pulp were: potassium, 851.98 mg/100 g; magnesium, 142.97 mg/100 g; and phosphorus, 139.40 mg/100 g, whereas for the seeds, they were potassium, 413.36 mg/100 g; sulfur, 151.36 mg/100 g; and phosphorus, 92.42 mg/100 g. Gas chromatography-mass spectrometry analysis revealed that the major unsaturated fatty acid was oleic acid, at 52.34% and 45.92%, respectively, for pulp and seeds. The main saturated fatty acids were palmitic acid (6.75%) and lauric acid (17.24%) in pulp and seeds, respectively. The total phenolic content was 1.16 and 13.73 mg GAE/100 g for pulp and seeds, respectively. Finally, the antioxidant activities were: b-carotene, 65.50% and 47.75%; DPPH, 0.079 IC₅₀ g/L and 0.0046 IC₅₀ g/L; and ABTS, 13.72 IC₅₀ g/L and 0.238 IC₅₀ g/L, respectively. The results obtained in this study confirm that the 'Medjool' cultivar grown in Mexico has the same quality of nutrients and antioxidants as those grown in the other main date-producing countries.

Acute Effects of Nutritive and Non-Nutritive Sweeteners on Postprandial Blood Pressure

Postprandial hypotension (PPH) is under-recognised, but common, particularly in the elderly, and is of clear clinical importance due to both the independent association between PPH and an increase in mortality and lack of effective management for this condition. Following health concerns surrounding excessive consumption of sugar, there has been a trend in the use of low- or non-nutritive sweeteners as an alternative. Due to the lack of literature in this area, we conducted a systematic search to identify studies relevant to the effects of different types of sweeteners on postprandial blood pressure (BP). The BP response to ingestion of sweeteners is generally unaffected in healthy young subjects, however in elderly subjects, glucose induces the greatest decrease in postprandial BP, while the response to sucrose is less pronounced. The limited studies investigating other nutritive and non-nutritive sweeteners have demonstrated minimal or no effect on postprandial BP. Dietary modification by replacing high nutritive sweeteners (glucose, fructose, and sucrose) with low nutritive (d-xylose, xylitol, erythritol, maltose, maltodextrin, and tagatose) and non-nutritive sweeteners may be a simple and effective management strategy for PPH.

Enzyme free glucose sensing by amino-functionalized silicon quantum dot

Silicon quantum dots have become one of the most popular nanomaterials in biological applications for their excellent biocompatibility and optical properties. Herein, we synthesized amino-functionalized silicon quantum dots (NH₂@SiQDs) via a simple microemulsion method, in which silicon tetrachloride and allylamine were used as source of silicon and functional group. NH₂@SiQDs exhibits good water-solubility, high fluorescence quantum yield and optical stability. A non-enzymatic biosensor of glucose was developed based on the fluorescence quenching of NH₂@SiQDs in response to glucose. The fluorescence response was linearly proportional to glucose in the concentration range of 1.0 × 10^-6-9.0 × 10^-5 mol/L and the detection limit was determined to be 3.0 × 10^-7 mol/L. The developed glucose sensor was successfully applied in blood glucose analysis of human serum. Satisfactory result that agreed very well with traditional method was obtained.

Gold nanoparticle etching induced by an enzymatic-like reaction for the colorimetric detection of hydrogen peroxide and glucose

A rapid colorimetric method for the sensitive and selective detection of H₂O₂ and glucose was developed based on the etching of AuNPs.

A photoelectrochemical glucose sensor based on gold nanoparticles as a mimic enzyme of glucose oxidase

This work reports the first construction of the ternary layers of ITO/PbS/SiO₂/AuNPs nanostructure for development of photoelectrochemical (PEC) glucose sensor. Herein, the thioglycolic acid-capped PbS quantum dots was employed as a PEC active probe, which is very sensitive to oxygen. The small gold nanoparticles (AuNPs) were act as nanozyme (mimic enzyme of glucose oxidase) to catalytically oxidize glucose in the presence of oxygen, meanwhile consumed oxygen and then resulted in the decrease of cathodic photocurrent. The insertion layer of SiO₂ nanoparticles between PbS and AuNPs could reduce efficiently the base current due to its low electroconductivity, which improved the detection limit. The proposed PEC sensor exhibited high sensitivity and gold selectivity towards glucose. The linear response of glucose concentrations ranged from 1.0 μM to 1.0 mM with detection limit of 0.46 μM (S/N = 3). The results suggest the potential of design and development of numerous nanozyme-based PEC biosensors with the advantage of the simplicity, stability, and efficiency.

This work reports the first construction of the ternary layers of ITO/PbS/SiO₂/AuNPs nanostructure for development of photoelectrochemical (PEC) glucose sensor.

Electrodeposition⁻Assisted Assembled Multilayer Films of Gold Nanoparticles and Glucose Oxidase onto Polypyrrole-Reduced Graphene Oxide Matrix and Their Electrocatalytic Activity toward Glucose

The study reports a facile and eco-friendly approach for nanomaterial synthesis and enzyme immobilization. A corresponding glucose biosensor was fabricated by immobilizing the gold nanoparticles (AuNPs) and glucose oxidase (GOD) multilayer films onto the polypyrrole (PPy)/reduced graphene oxide (RGO) modified glassy carbon electrode (GCE) via the electrodeposition and self-assembly. PPy and graphene oxide were first coated on the surface of a bare GCE by the electrodeposition. Then, AuNPs and GOD were alternately immobilized onto PPy-RGO/GCE electrode using the electrodeposition of AuNPs and self-assembly of GOD to obtain AuNPs-GOD multilayer films. The resulting PPy-RGO-(AuNPs-GOD)_n/GCE biosensors were used to characterize and assess their electrocatalytic activity toward glucose using cyclic voltammetry and amperometry. The response current increased with the increased number of AuNPs-GOD layers, and the biosensor based on four layers of AuNPs-GOD showed the best performance. The PPy-RGO-(AuNPs-GOD)₄/GCE electrode can detect glucose in a linear range from 0.2 mM to 8 mM with a good sensitivity of 0.89 μA/mM, and a detection limit of 5.6 μM (S/N = 3). This study presents a promising eco-friendly biosensor platform with advantages of electrodeposition and self-assembly, and would be helpful for the future design of more complex electrochemical detection systems.

A One-Step Extraction and Luminescence Assay for Quantifying Glucose and ATP Levels in Cultured HepG2 Cells

A fluorescence-based enzymatic microplate intracellular glucose assay was designed and fully validated. The method was tested in a hepatocellular cancer cell line (HepG2). Our novel one-step extraction reagent gave stable cell lysates for glucose, adenosine triphosphate (ATP), and total protein determination from the same sample. Limit of detection for glucose was 0.13 µM (26 pmol/well), which is superior to commercially available glucose assays. Both intra- and interday assay imprecision in HepG2 cultures were less than 12% coefficient of variance (CV). In cell lysates spiked with glucose, recovery at two levels varied between 83.70% and 91.81%, and both linearity and stability were acceptable. HepG2 cells treated with agents affecting glucose uptake/metabolism (phloretin, quercetin, quercetin-3'-sulfate, NaF, 3-bromopyruvate, NaN₃, oligomycin A, ochratoxin A, cytochalasin B, and anti-GLUT1 antibody) showed dose-dependent changes in glucose and ATP levels without total protein (cell) loss. Finally, we performed flow cytometric glucose uptake measurement in the treated cells using 2-[N-(7-nitrobenz-2-oxa-1,3-diazol-4-yl)amino]-2-deoxyglucose fluorescent glucose analog. Glucose uptake did not always mirror the intracellular glucose levels, which most likely reflects the differences between the two methodologies. However, interpreting data obtained by both methods and taking ATP/protein levels at the same time, one can get information on the mode of action of the compounds.

Direct-Continuous Preparation of Nanostructured Titania-Silica Using Surfactant-Free Non-Scaffold Rice Starch Template

The conventional synthesis route of nanostructured titania-silica (Ti-SiNS) based on sol-gel requires the use of a surfactant-type template that suffers from hazardous risks, environmental concerns, and a tedious stepwise process. Alternatively, biomaterials have been introduced as an indirect template, but still required for pre-suspended scaffold structures, which hinder their practical application. Herein, we report an easy and industrially viable direct-continuous strategy for the preparation of Ti-SiNS from nanostructured-silica (SiNS) using a hydrolyzed rice starch template. This strategy fits into the conventional industrial process flow, as it allows starch to be used directly in time-effective and less complicated steps, with the potential to upscale. The formation of Ti-SiNS is mainly attributed to Ti attachment in the SiNS frameworks after the polycondensation of the sol-gel composition under acidic-media. The SiNS had pseudo-spherical morphology (nanoparticles with the size of 13 to 22 nm), short order crystal structure (amorphous) and high surface area (538.74 m²·g−1). The functionalized SiNS into Ti-SiNS delivered considerable catalytic activity for epoxidation of 1-naphtol into 1,4-naphthoquinone. The described direct-continuous preparation shows great promise for a cheap, green, and efficient synthesis of Ti-SiNS for advanced applications.

Fabrication of a promising immobilization platform based on electrochemical synthesis of a conjugated polymer

Since conjugated polymers are an important class of materials with remarkable properties in biosensor applications, in this study, a novel glucose biosensor based on a conjugated polymer was fabricated via the electropolymerization of the monomer 10,13-bis(4-hexylthiophen-2-yl)dipyridol[3,2-a:2',3'-c]phenazine onto a graphite electrode surface. Glucose oxidase (GOx) was used as the model biological recognition element. As a result of the enzymatic reaction between GOx and glucose, the glucose amount was determined by monitoring the change in the oxygen level associated with substrate concentration via the amperometric detection technique. The proposed system possessed superior properties with K_M^app value of 0.262 mM, 2.88 × 10^-3 mM limit of detection and 105.12 μA mM^-1 cm^-2 sensitivity. These results show that conjugated polymer film provides an effective and stable immobilization matrix for the enzyme. Finally, the biosensor was applied successfully to several commercially available beverage samples for glucose determination proving an inexpensive and highly sensitive system applicable for real time analyses.

Challenges and perspectives in continuous glucose monitoring

Diabetes is a global epidemic that threatens the health and well-being of hundreds of millions of people. The first step in patient treatment is to monitor glucose levels. Currently this is most commonly done using enzymatic strips. This approach suffers from several limitations, namely it requires a blood sample and is therefore invasive, the quality and the stability of the enzymatic strips vary widely, and the patient is burdened by performing the measurement themselves. This results in dangerous fluctuations in glucose levels often going undetected. There is currently intense research towards new approaches in glucose detection that would enable non-invasive continuous glucose monitoring (CGM). In this review, we explore the state-of-the-art in glucose detection technologies. In particular, we focus on the physical mechanisms behind different approaches, and how these influence and determine the accuracy and reliability of glucose detection. We begin by reviewing the basic physical and chemical properties of the glucose molecule. Although these play a central role in detection, especially the anomeric ratio, they are surprisingly often overlooked in the literature. We then review state-of-the art and emerging detection methods. Finally, we survey the current market for glucometers. Recent results show that past challenges in glucose detection are now being overcome, thereby enabling the development of smart wearable devices for non-invasive continuous glucose monitoring. These new directions in glucose detection have enormous potential to improve the quality of life of millions of diabetics, as well as offer insight into the development, treatment and even prevention of the disease.

Manipulating the Temperature of Sulfurization to Synthesize α-NiS Nanosphere Film for Long-Term Preservation of Non-enzymatic Glucose Sensors

In this study, alpha nickel sulfide (α-NiS) nanosphere films have been successfully synthesized by electroplating the nickel nanosheet film on the indium tin oxide (ITO) glass substrate and sulfuring nickel-coated ITO glass substrate. First, we electrodeposited the nickel nanosheet films on the ITO glass substrates which were cut into a 0.5 × 1 cm² size. Second, the nanosheet nickel films were annealed in vacuum-sealed glass ampoules with sulfur sheets at different annealing temperatures (300, 400, and 500 °C) for 4 h in vacuum-sealed glass ampoules. The α-NiS films were investigated by using X-ray diffraction (XRD), variable vacuum scanning electron microscopy (VVSEM), field emission scanning electron microscopy/energy dispersive spectrometer (FE-SEM/EDS), cyclic voltammogram (CV), electrochemical impedance spectroscopy (EIS), ultraviolet/visible/near-infrared (UV/Visible/NIR) spectra, and photoluminescence (PL) spectra. Many nanospheres were observed on the surface of the α-NiS films at the annealing temperature 400 °C for 4 h. We also used the high-resolution transmission electron microscopy (HR-TEM) for the analysis of the α-NiS nanospheres. We demonstrated that our α-NiS nanosphere film had a linear current response to different glucose concentrations. Additionally, our α-NiS nanosphere films were preserved at room temperature for five and a half years and were still useful for detecting glucose at low concentration.

Claimed effects, outcome variables and methods of measurement for health claims proposed under European Community Regulation 1924/2006 in the area of blood glucose and insulin concentrations

Most requests for authorization to bear health claims under Articles 13(5) and 14 related to blood glucose and insulin concentration/regulation presented to the European Food Safety Authority (EFSA) receive a negative opinion. Reasons for such decisions are mainly ascribable to poor substantiation of the claimed effects. In this scenario, a project was carried out aiming at critically analysing the outcome variables (OVs) and methods of measurement (MMs) to be used to substantiate health claims, with the final purpose to improve the quality of applications provided by stakeholders to EFSA. This manuscript provides a position statement of the experts involved in the project, reporting the results of an investigation aimed to collect, collate and critically analyse the information relevant to claimed effects (CEs), OVs and MMs related to blood glucose and insulin levels and homoeostasis compliant with Regulation 1924/2006. The critical analysis of OVs and MMs was performed with the aid of the pertinent scientific literature and was aimed at defining their appropriateness (alone or in combination with others) to support a specific CE. The results can be used to properly select OVs and MMs in a randomized controlled trial, for an effective substantiation of the claims, using the reference method(s) whenever available. Moreover, results can help EFSA in updating the guidance for the scientific requirements of health claims.

Modeling and Analysis of an Opto-Fluidic Sensor for Lab-on-a-Chip Applications

In this work modeling and analysis of an integrated opto-fluidic sensor, with a focus on achievement of single mode optical confinement and continuous flow of microparticles in the microfluidic channel for lab-on-a-chip (LOC) sensing application is presented. This sensor consists of integrated optical waveguides, microfluidic channel among other integrated optical components. A continuous flow of microparticles in a narrow fluidic channel is achieved by maintaining the two sealed chambers at different temperatures and by maintaining a constant pressure of 1 Pa at the centroid of narrow fluidic channel geometry. The analysis of silicon on insulator (SOI) integrated optical waveguide at an infrared wavelength of 1550 nm for single mode sensing operation is presented. The optical loss is found to be 5.7 × 10^-4 dB/cm with an effective index of 2.3. The model presented in this work can be effectively used to detect the nature of microparticles and continuous monitoring of pathological parameters for sensing applications.

Design of Amperometric Biosensors for the Detection of Glucose Prepared by Immobilization of Glucose Oxidase on Conducting (Poly)Thiophene Films

Enzyme-based sensors have emerged as important analytical tools with application in diverse fields, and biosensors for the detection of glucose using the enzyme glucose oxidase have been widely investigated. In this work, the preparation of biosensors by electrochemical polymerization of (poly)thiophenes, namely 2,2'-bithiophene (2,2'-BT) and 4,4'-bis(2-methyl-3-butyn-2-ol)-2,2'-bithiophene (4,4'-bBT), followed by immobilization of glucose oxidase on the films, is described. N-cyclohexyl-N'-(2-morpholinoethyl)carbodiimide metho-p-toluenesulfonate (CMC) was used as a condensing agent, and p-benzoquinone (BQ) was used as a redox mediator in solution. The glucose oxidase electrodes with films of 2,2'-BT and 4,4'-bBT were then tested for their ability in detecting glucose from synthetic and real samples (pear, apricot, and peach fruit juices).

Preparation of Cuprous Oxide Mesoporous Spheres with Different Pore Sizes for Non-Enzymatic Glucose Detection

Mass transfer plays a significant role in a sensor's performance, because the substrate can be detected only when it contacts with the active catalytic surface. In this work, cuprous oxide mesoporous nanospheres (Cu₂O MPNS) with different pore size distributions are fabricated and applied as electrocatalysts for glucose detection. The small pore Cu₂O (SP-Cu₂O, mean pore size of 5.3 nm) and large pore Cu₂O (LP-Cu₂O, mean pore size of 16.4 nm) spheres are prepared by the template method and an etching treatment. The obtained two kinds of Cu₂O MPNS exhibit high porosity with a similar specific surface area of 61.2 and 63.4 (m²·g-1), respectively. The prepared Cu₂O MPNS are used to construct an electrochemical non-enzymatic glucose sensor. The results show that the LP-Cu₂O exhibits better performance than SP-Cu₂O, which illustrates that the internal diffusion takes a great impact on the performance of the sensor. The LP-Cu₂O modified electrode possesses a high and reproducible sensitivity of 2116.9 μA mM-1·cm-2 at the applied potential of 0.6 V with a wide detection range of 0.003-7.8 mM and a low detection limit of 0.42 μM.

Nanostructured biosensor using bioluminescence quenching technique for glucose detection

Background

Most methods for monitoring glucose level require an external energy source which may limit their application, particularly in vivo test. Bioluminescence technique offers an alternative way to provide emission light without external energy source by using bioluminescent proteins found from firefly or marine vertebrates and invertebrates. For quick and non-invasive detection of glucose, we herein developed a nanostructured biosensor by applying the bioluminescence technique.

Results

Luciferase bioluminescence protein (Rluc) is conjugated with β-cyclodextrin (β-CD). The bioluminescence intensity of Rluc can be quenched by 8 ± 3 nm gold nanoparticles (Au NPs) when Au NPs covalently bind to β-CD. In the presence of glucose, Au NPs are replaced and leave far from Rluc through a competitive reaction, which results in the restored bioluminescence intensity of Rluc. A linear relationship is observed between the restored bioluminescence intensity and the logarithmic glucose concentration in the range of 1–100 µM. In addition, the selectivity of this designed sensor has been evaluated. The performance of the senor for determination of the concentration of glucose in the blood of diabetic rats is studied for comparison with that of the concentration of glucose in aqueous.

Conclusions

This study demonstrates the design of a bioluminescence sensor for quickly detecting the concentration of glucose sensitively.

Electronic supplementary material

The online version of this article (doi:10.1186/s12951-017-0294-1) contains supplementary material, which is available to authorized users.

A stretchable and screen-printed electrochemical sensor for glucose determination in human perspiration

Here we present two types of all-printable, highly stretchable, and inexpensive devices based on platinum (Pt)-decorated graphite for glucose determination in physiological fluids. Said devices are: a non-enzymatic sensor and an enzymatic biosensor, the latter showing promising results. Glucose has been quantified by measuring hydrogen peroxide (H2O2) reduction by chronoamperometry at -0.35V (vs pseudo-Ag/AgCl) using glucose oxidase immobilized on Pt-decorated graphite. The sensor performs well for the quantification of glucose in phosphate buffer solution (0.25M PBS, pH 7.0), with a linear range between 0 mM and 0.9mM, high sensitivity and selectivity, and a low limit of detection (LOD). Thus, it provides an alternative non-invasive and on-body quantification of glucose levels in human perspiration. This biosensor has been successfully applied on real human perspiration samples and results also show a significant correlation between glucose concentration in perspiration and glucose concentration in blood measured by a commercial glucose meter.

Gram-Scale Synthesis of Hydrophilic PEI-Coated AgInS2 Quantum Dots and Its Application in Hydrogen Peroxide/Glucose Detection and Cell Imaging

Assisted with polyethylenimine, 4.0 L of water-soluble AgInS₂ quantum dots (AIS QDs) were successfully synthesized in an electric pressure cooker. As-prepared QDs exhibit yellow emission with a photoluminescence (PL) quantum yield up to 32%. The QDs also show excellent water/buffer stability. The highly luminescent AIS QDs are used to explore their dual-functional behavior: detection of hydrogen peroxide (H₂O₂)/glucose and cell imaging. The amino-functionalized AIS QDs show high sensitivity and specificity for H₂O₂ and glucose with detection limits of 0.42 and 0.90 μM, respectively. A linear correlation was established between PL intensity and concentration of H₂O₂ in the ranges of 0.5-10 μM and 10-300 μM, while the linear ranges were 1-10 μM and 10-1000 μM for detection of glucose. The AIS QDs reveal negligible cytotoxicity on HeLa cells. Furthermore, the luminescence of AIS QDs gives the function of optical imaging.