Submicron structure in L-alpha-dipalmitoylphosphatidylcholine monolayers and bilayers probed with confocal, atomic force, and near-field microscopy

Extraction of near-field fluorescence from composite signals to provide high resolution images of glial cells

The subdiffraction optical resolution that can be achieved using near-field optical microscopy has the potential to permit new approaches and insights into subcellular function and molecular dynamics. Despite the potential of this technology, it has been difficult to apply to cellular samples. One significant problem is that sample thickness causes the optical information to be comprised of a composite signal containing both near- and far-field fluorescence. To overcome this issue we have developed an approach in which a near-field optical fiber is translated toward the cell surface. The increase in fluorescence intensity during z-translation contains two components: a far-field fluorescence signal when the tip of the fiber is distant from the labeled cell, and combined near- and far-field fluorescence when the tip interacts with the cell surface. By fitting a regression curve to the far-field fluorescence intensity as the illumination aperture approaches the cell, it is possible to isolate near-field from far-field fluorescent signals. We demonstrate the ability to resolve actin filaments in chemically fixed, hydrated glial cells. A comparison of composite fluorescence signals with extracted near-field fluorescence demonstrates that this approach significantly increases the ability to detect subcellular structures at subdiffraction resolution.

Spatially Correlated Fluorescence/AFM of Individual Nanosized Particles and Biomolecules

Individual fluorescent polystyrene nanospheres (<10-100-nm diameter) and individual fluorescently labeled DNA molecules were dispersed on mica and analyzed using time-resolved fluorescence spectroscopy and atomic force microscopy (AFM). Spatial correlation of the fluorescence and AFM measurements was accomplished by (1) positioning a single fluorescent particle into the near diffraction-limited confocal excitation region of the optical microscope, (2) recording the time-resolved fluorescence emission, and (3) measuring the intensity of the excitation laser light scattered from the apex of an AFM probe tip and the AFM topography as a function of the lateral position of the tip relative to the sample substrate. The latter measurements resulted in concurrent high-resolution (approximately 10-20 nm laterally) images of the laser excitation profile of the confocal microscope and the topography of the sample. Superposition of these optical and topographical images enabled unambiguous identification of the sample topography residing within the excitation region of the optical microscope, facilitating the identification and structural characterization of the nanoparticle(s) or biomolecule(s) responsible for the fluorescence signal observed in step 2. These measurements also provided the lateral position of the particles relative to the laser excitation profile and the surrounding topography with nanometer-scale precision and the relationship between the spectroscopic and structural properties of the particles. Extension of these methods to the study of other types of nanostructured materials is discussed.

Mapping the distribution of emissive molecules in human ocular lipofuscin granules with near-field scanning optical microscopy

Several high resolution imaging techniques are utilized to probe the structure of human ocular lipofuscin granules. Atomic force microscopy reveals typical granule sizes to be about one micrometre in diameter and hundreds of nanometres in height, in agreement with previous electron microscopy results. For issues concerning the role of lipofuscin in age-related macular degeneration, recent attention has focused on the orange-emitting fluorophore, A2E. Confocal microscopy measurements are presented which reveal the presence of a highly emissive component in the granules, consistent with the presence of A2E. It is shown, however, that the interpretation of these results is complicated by the lack of structural details about the particles. To address these issues, near-field scanning optical microscopy (NSOM) measurements are presented which measure both the lipofuscin fluorescence and topography, simultaneously. These measurements reveal distinct structure in the fluorescence image which do not necessarily correlate with the topography of the granules. Moreover, direct comparison between the NSOM fluorescence and topography measurements suggests that A2E is not the major component in lipofuscin. These measurements illustrate the unique capabilities of NSOM for probing into the microstructure of lipofuscin and uncovering new insights into its phototoxicity.

Lateral organization and domain formation in a two-component lipid membrane system

The thermodynamic phase behavior and lateral lipid membrane organization of unilamellar vesicles made from mixtures of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2 distearoyl-sn-glycero-3-phosphocholine (DSPC) were investigated by fluorescence resonance energy transfer (FRET) as a function of temperature and composition. This was done by incorporating a headgroup-labeled lipid donor (NBD-DPPE) and acceptor (N-Rh-DPPE) in low concentrations into the binary mixtures. Two instances of increased energy transfer efficiency were observed close to the phase lines in the DMPC/DSPC phase diagram. The increase in energy transfer efficiency was attributed to a differential preference of the probes for dynamic and fluctuating gel/fluid coexisting phases. This differential preference causes the probes to segregate (S. Pedersen, K. Jørgensen, T. R. Baekmark, and O. G. Mouritsen, 1996, Biophys. J. 71:554-560). The observed increases in energy transfer match with the boundaries of the DMPC/DSPC phase diagram, as measured by Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). We propose that the two instances of probe segregation are due to the presence of DMPC-rich and DSPC-rich domains, which form a dynamic structure of gel/fluid coexisting phases at two different temperatures. Monitoring the melting profile of each lipid component independently by FTIR shows that the domain structure is formed by DMPC-rich and DSPC-rich domains rather than by pure DMPC and DSPC domains.

Temperature dependence of the topology of supported dimirystoyl-distearoyl phosphatidylcholine bilayers

Topology of fluid and gel domains in the supported bilayer two-component system formed from equimolar mixtures of dimyristoylphosphatidylcholine (DMPC) and distearoylphosphatidylcholine (DSPC) was determined by AFM, at various temperatures corresponding to the gel and the gel + fluid region of the phase diagram. The data show that, in the disconnected fluid part of the DMPC/DSPC gel-liquid crystal-phase-separation region, the size of fluid domains markedly exceeds that predicted from spectroscopic experiments or from Monte Carlo simulations. They provide a direct evidence for the transition from the disconnected fluid to the disconnected gel region of the phase diagram, again with gel-phase domains much larger than expected. Finally, images of the gel phase at different temperatures suggest that structural rearrangements of the phospholipids can disrupt the continuity of the supported bilayer.

Advances in the characterization of supported lipid films with the atomic force microscope

During the past decade, the atomic force microscope (AFM) has become a key technique in biochemistry and biophysics to characterize supported lipid films, as testified by the continuous growth in the number of papers published in the field. The unique capabilities of AFM are: (i) capacity to probe, in real time and in aqueous environment, the surface structure of lipid films; (ii) ability to directly measure physical properties at high spatial resolution; (iii) possibility to modify the film structure and biophysical processes in a controlled way. Such experiments, published up to June 2000, are the focus of the present review. First, we provide a general introduction on the preparation and characterization of supported lipid films as well as on the principles of AFM. The section 'Structural properties' focuses on the various applications of AFM for characterizing the structure of supported lipid films: visualization of molecular structure, formation of structural defects, effect of external agents, formation of supported films, organization of phase-separated films (coexistence region, mixed films) and, finally, the use of supported lipid bilayers for anchoring biomolecules such as DNA, enzymes and crystalline protein arrays. The section 'Physical properties' introduces the principles of force measurements by AFM, interpretation of these measurements and their recent application to supported lipid films and related structures. Finally, we highlight the major achievements brought by the technique and some of the current limitations.

Domain growth, shapes, and topology in cationic lipid bilayers on mica by fluorescence and atomic force microscopy

Domain formation in mica-supported cationic bilayers of dipalmitoyltrimethylammoniumpropane (DPTAP) and dimyristoyltrimethylammoniumpropane (DMTAP), fluorescently doped with an NBD (((7-nitro-2-1, 3-benzoxadiazol-4-yl)amino)caproyl) phospholipid, was investigated with fluorescence microscopy and atomic force microscopy. Heating above the acyl chain melting temperature and cooling to room temperature resulted in nucleation and growth of domains with distinguishable patterns. Fractal patterns were found for DPTAP, whereas DMTAP domains were elongated and triangular with feathery edges. Reducing the cooling rate or probe concentration for DPTAP bilayers resulted in larger, filled-in domains with more rounded edges. However, for DMTAP, cooling rates mainly affected size and only slightly modified domain morphology. In a saline environment, the domains were dark, and the surrounding continuous region was bright and thus contained the fluorescent probe. However, as the salt concentration was decreased, the dark regions percolated (connected), resulting in bright domains. Atomic force microscopy scans along domain edges revealed that the dark regions in fluorescence images were approximately 1.4 nm thicker than the light regions. Additionally, the dark regions were of bilayer thickness, approximately 4 nm. Comparison of these results in bilayers to well-documented behavior in Langmuir monolayers has revealed many similarities (and some differences) and is therefore useful for understanding our observations and identifying possible growth mechanisms that may occur in domain formation in cell membranes or supported membrane systems.

Distribution of ganglioside GM1 in L-alpha-dipalmitoylphosphatidylcholine/cholesterol monolayers: a model for lipid rafts

The distribution of low concentrations of ganglioside GM1 in L-alpha-dipalmitoylphosphatidylcholine (DPPC) and DPPC/cholesterol monolayers supported on mica has been studied using atomic force microscopy (AFM). The monolayers studied correspond to a pure gel phase and a mixture of liquid-expanded (LE) and liquid-condensed (LC) phases for DPPC and to a single homogeneous liquid-ordered phase for 2:1 DPPC/cholesterol. The addition of 2.5-5% GM1 to phase-separated DPPC monolayers resulted in small round ganglioside-rich microdomains in the center and at the edges of the LC domains. Higher amounts of GM1 (10%) give numerous filaments in the center of the LC domains and larger patches at the edges. A gel phase DPPC monolayer containing GM1 showed large domains containing a network of GM1-rich filaments. The addition of GM1 to a liquid-ordered 2:1 DPPC/cholesterol monolayer gives small, round domains that vary in size from 50 to 150 nm for a range of surface pressures. Larger amounts of GM1 lead to coalescence of the small, round domains to give longer filaments that cover 30-40% of the monolayer surface for 10 mol % GM1. The results indicate that biologically relevant GM1 concentrations lead to submicron-sized domains in a cholesterol-rich liquid-ordered phase that is analogous to that found in detergent-insoluble membrane fractions, and are thought to be important in membrane microdomains or rafts. This demonstrates that AFM studies of model monolayers and bilayers provide a powerful method for the direct detection of microdomains that are too small for study with most other techniques.

Partitioning of amphiphiles between coexisting ordered and disordered phases in two-phase lipid bilayer membranes

The partition coefficients (K(P)) of a series of single-chain and double-chain fluorescent amphiphiles, between solid ordered (P(beta') and L(beta)) and liquid disordered (L(alpha) of the type l(d)) lipid phases coexisting in the same lipid bilayer, was studied using steady-state fluorescence emission anisotropy. The single-chain amphiphiles were N-(7-nitrobenzoxa-2, 3-diazol-4-yl)-alkylamines, and the double-chain amphiphiles were N-(7-nitrobenzoxa-2, 3-diazol-4-yl)-phosphatidylethanolamines with chain lengths of 12-18 carbon atoms. Saturated 18-carbon alkyl/acyl chain compounds were also compared with Delta(9)-cis unsaturated chains of the same chain length. The fluorescence anisotropy of the probes was examined in lipid bilayers (multilamellar vesicles) prepared from an equimolar mixture of dilauroylphosphatidylcholine and distearoylphosphatidylcholine and studied as a function of temperature through the entire temperature range of coexistence of ordered gel phases and a disordered fluid phase in this system. The unsaturated chain amphiphiles partitioned exclusively into the fluid phase whenever this phase was present, as did the saturated chain amphiphiles with the shortest chains (C(12:0)), while K(P) ranges between 1 and 2, in favor of the L(beta) solid phase, for the amphiphiles with long saturated (C(18:0)) alkyl/acyl chains, with intermediate behavior for the intermediate chain lengths. All probes appeared to be totally excluded from P(beta') solid (gel) phases. The technique was also used to determine partitioning of some of the probes between coexisting liquid ordered (cholesterol-containing) (l(o)) and liquid disordered (l(d)) L(alpha) phases. In this case the ratio of signal amplitude to noise allowed us to obtain a qualitative, but not quantitative, measure of the phase partitioning of the probes. We conclude that the partitioning behavior of the probes examined between coexisting l(o) and l(d) phases is qualitatively similar to that observed between solid ordered and liquid disordered phases.

Visualization of highly ordered striated domains induced by transmembrane peptides in supported phosphatidylcholine bilayers

We used atomic force microscopy (AFM) to study the lateral organization of transmembrane TmAW(2)(LA)(n)W(2)Etn peptides (WALP peptides) incorporated in phospholipid bilayers. These well-studied model peptides consist of a hydrophobic alanine-leucine stretch of variable length, flanked on each side by two tryptophans. They were incorporated in saturated phosphatidylcholine (PC) vesicles, which were deposited on a solid substrate via the vesicle fusion method, yielding hydrated gel-state supported bilayers. At low concentrations (1 mol %) WALP peptides induced primarily line-type depressions in the bilayer. In addition, striated lateral domains were observed, which increased in amount and size (from 25 nm up to 10 microm) upon increasing peptide concentration. At high peptide concentration (10 mol %), the bilayer consisted mainly of striated domains. The striated domains consist of line-type depressions and elevations with a repeat distance of 8 nm, which form an extremely ordered, predominantly hexagonal pattern. Overall, this pattern was independent of the length of the peptides (19-27 amino acids) and the length of the lipid acyl chains (16-18 carbon atoms). The striated domains could be pushed down reversibly by the AFM tip and are thermodynamically stable. This is the first direct visualization of alpha-helical transmembrane peptide-lipid domains in a bilayer. We propose that these striated domains consist of arrays of WALP peptides and fluidlike PC molecules, which appear as low lines. The presence of the peptides perturbs the bilayer organization, resulting in a decrease in the tilt of the lipids between the peptide arrays. These lipids therefore appear as high lines.

Lipid monolayers: why use half a membrane to characterize protein-membrane interactions?

Variants of membrane-active proteins and peptides are increasingly available through synthesis and molecular engineering. When determining the effects of structural changes upon the interaction of these proteins with lipid membranes, monomolecular films of lipids at the air-water interface have significant advantages over bilayers and other lipid dispersions. In the past year, a variety of protein-lipid interactions has been characterized successfully using relatively simple surface measurements.

Effect of gramicidin A on the dipole potential of phospholipid membranes

The effect of channel-forming peptide gramicidin A on the dipole potential of phospholipid monolayers and bilayers has been studied. Surface pressure and surface potential isotherms of monolayers have been measured with a Langmuir trough equipped with a Wilhelmy balance and a surface potential meter (Kelvin probe). Gramicidin has been shown to shift pressure-area isotherms of phospholipids and to reduce their monolayer surface potentials. Both effects increase with the increase in gramicidin concentration and depend on the kind of phosphatidylcholine used. Application of the dual-wavelength ratiometric fluorescence method using the potential-sensitive dye RH421 has revealed that the addition of gramicidin A to dipalmitoylphosphatidylcholine liposomes leads to a decrease in the fluorescence ratio of RH421. This is similar to the effect of phloretin, which is known to decrease the dipole potential. The comparison of the concentration dependences of the fluorescence ratio for gramicidin and phloretin shows that gramicidin is as potent as phloretin in modifying the membrane dipole potential.

Near-field scanning optical microscopy studies of L-alpha-dipalmitoylphosphatidylcholine monolayers at the air-liquid interface

The phase structure in L-alpha-dipalmitoylphosphatidylcholine-20 mol% fluorescent 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate Langmuir monolayers dispersed on a 2 M sucrose solution subphase is studied with near-field scanning optical microscopy (NSOM). Cantilevered NSOM probes operating in a tapping-mode feedback or an optical interferometric feedback mode are capable of tracking the air-sucrose solution interface. At the micrometre scale, the NSOM fluorescence images reveal lipid domain features similar to those observed previously in supported Langmuir-Blodgett (LB) monolayers. At the submicrometre scale, the small nanometric lipid islands seen in LB films are not observed at the air-sucrose interface. This supports a mechanism in which domain formation in LB films can be induced by means of the transfer process onto the solid support. Progress towards extending these studies to films at the air-water interface using the optical interferometric feedback method is also discussed.

Scanning near-field fluorescence resonance energy transfer microscopy

A new microscopic technique is demonstrated that combines attributes from both near-field scanning optical microscopy (NSOM) and fluorescence resonance energy transfer (FRET). The method relies on attaching the acceptor dye of a FRET pair to the end of a near-field fiber optic probe. Light exiting the NSOM probe, which is nonresonant with the acceptor dye, excites the donor dye introduced into a sample. As the tip approaches the sample containing the donor dye, energy transfer from the excited donor to the tip-bound acceptor produces a red-shifted fluorescence. By monitoring this red-shifted acceptor emission, a dramatic reduction in the sample volume probed by the uncoated NSOM tip is observed. This technique is demonstrated by imaging the fluorescence from a multilayer film created using the Langmuir-Blodgett (LB) technique. The film consists of L-alpha-dipalmitoylphosphatidylcholine (DPPC) monolayers containing the donor dye, fluorescein, separated by a spacer group of three arachidic acid layers. A DPPC monolayer containing the acceptor dye, rhodamine, was also transferred onto an NSOM tip using the LB technique. Using this modified probe, fluorescence images of the multilayer film reveal distinct differences between images collected monitoring either the donor or acceptor emission. The latter results from energy transfer from the sample to the NSOM probe. This method is shown to provide enhanced depth sensitivity in fluorescence measurements, which may be particularly informative in studies on thick specimens such as cells. The technique also provides a mechanism for obtaining high spatial resolution without the need for a metal coating around the NSOM probe and should work equally well with nonwaveguide probes such as atomic force microscopy tips. This may lead to dramatically improved spatial resolution in fluorescence imaging.