Influences of Chemical Properties, Soil Properties, and Solution pH on Soil-Water Partitioning Coefficients of Per- and Polyfluoroalkyl Substances (PFASs)

Are Chinese mitten crabs (Eriocheir sinensis) suitable as biomonitor or bioindicator of per- and polyfluoroalkyl substances (PFAS) pollution?

Per- and polyfluoroalkyl substances (PFAS) are ubiquitous in the environment. In Flanders, the bioaccumulation in aquatic organisms is currently being monitored using European perch and European eel. Since both are native species, there is an ethical need to search for other suitable biomonitors. This study aims to investigate whether the invasive Chinese mitten crab could be used in biomonitoring programs by assessing PFAS accumulation in hepatopancreas, muscle tissue, and carapace. Furthermore, we correlated accumulated concentrations to those in the local abiotic environment. Concentrations in the crabs (highest average ∑PFAS concentration of 688 ± 505 ng/g ww) were often higher than those in crab species from other regions across the globe, confirming that Flanders is highly polluted with PFAS. Concentrations in the crabs did not reflect those in the abiotic environment. This implies that biomonitoring is necessary to investigate the impact of PFAS pollution on organisms in aquatic ecosystems, as important data is missing when only the abiotic environment is monitored. The accumulation profiles differed between the invasive crab and the native European perch and European eel, potentially due to a different ecology and trophic position. Since all three species provide complementary information on the PFAS pollution, a multi-species approach in biomonitoring is recommended. Overall, our results show that the crabs can be used as biomonitor, but more information is necessary to confirm their suitability as bioindicator.

PFAS release from the subsurface and capillary fringe during managed aquifer recharge

Managed aquifer recharge (MAR) is a sustainable way of harvesting groundwater in water-stressed urbanized areas, where reclaimed wastewater or stormwater is applied on a large basin to infiltrate water into the groundwater aquifer naturally. This process could rapidly fluctuate the water table and move the capillary fringe boundary, and the change in flow dynamic and associated geochemical changes could trigger the release of sequestered pollutants, including per- and polyfluoroalkyl substances (PFAS), also known as 'forever chemicals', from the subsurface and capillary fringe. Yet, the potential of PFAS release from the subsurface and capillary zone during recharge events when the water table rapidly fluctuates has not been evaluated. This study uses laboratory column experiments to simulate PFAS release from pre-contaminated subsurface and capillary fringe during groundwater table fluctuation. The results reveal that the groundwater level fluctuations during MAR increased the release of perfluorobutanesulfonic acid (PFBS) and perfluorooctanesulfonic acid (PFOS) from the capillary fringe, but the fraction released depended on PFAS type and their association with soil colloids. A higher proportion of PFOS in column effluent was found to be associated with particles, while a greater portion of released PFBS was in a free or dissolved state. The direction of water table fluctuation did not affect the release of PFAS in this study. A lack of change in the concentration of bromide, a conservative tracer, during flow interruption, indicates that diffusion of PFAS through reconnected pores during water table rise had an insignificant effect on PFAS release. Overall, this study provides insights into how PFAS can be released from the subsurface and capillary fringe during managed aquifer recharge when the groundwater level is expected to fluctuate quickly.

The Dynamics of Per- and Polyfluoroalkyl Substances (PFAS) at Interfaces in Porous Media: A Computational Roadmap from Nanoscale Molecular Dynamics Simulation to Macroscale Modeling

Managing and remediating perfluoroalkyl and polyfluoroalkyl substance (PFAS) contaminated sites remains challenging. The major reasons are the complexity of geological media, partly unknown dynamics of the PFAS in different phases and at fluid-fluid and fluid-solid interfaces, and the presence of cocontaminants such as nonaqueous phase liquids (NAPLs). Critical knowledge gaps exist in understanding the behavior and fate of PFAS in vadose and saturated zones and in other porous media such as concrete and asphalt. The complexity of PFAS-surface interactions warrants the use of advanced characterization and computational tools to understand and quantify nanoscale behavior of the molecules. This can then be upscaled to the microscale to develop a constitutive relationship, in particular to distinguish between surface and bulk diffusion. The dominance of surface diffusion compared to bulk diffusion results in the solutocapillary Marangoni effect, which has not been considered while investigating the fate of PFAS. Without a deep understanding of these phenomena, derivation of constitutive relationships is challenging. The current Darcy scale mass-transfer models use constitutive relationships derived from either experiments or field measurements, which makes their applicability potentially limited. Here we review current efforts and propose a roadmap for developing Darcy scale transport equations for PFAS. We find that this needs to be based on systematic upscaling of both experimental and computational studies from nano- to microscales. We highlight recent efforts to undertake molecular dynamics simulations on problems with similar levels of complexity and explore the feasibility of conducting nanoscale simulations on PFAS dynamics at the interface of fluid pairs.

Per- and polyfluoroalkyl substances (PFAS) in final treated solids (Biosolids) from 190 Michigan wastewater treatment plants

Trends in concentration, distribution, and variability of per- and polyfluoroalkyl substances (PFAS) in biosolids are characterized using an extensive dataset of 350 samples from 190 wastewater treatment plants (WWTPs) across Michigan. All samples are comprised of final treated solids generated at the end of the wastewater treatment process. Concentrations of both individual and Σ24 PFAS are lognormally distributed, with Σ24 PFAS concentrations ranging from 1-3200 ng/g and averaging 108 ± 277 ng/g dry wt. PFAS with carboxyl and sulfonic functional groups comprise 29% and 71% of Σ24 PFAS concentrations, respectively, on average. Primary sample variability in concentration is associated with long-chain PFAS with higher tendency for partitioning to biosolids. Short-chain carboxylic compounds, most notably PFHxA, are responsible for secondary concentration variability. Usage of FTSA and PFBS replacements to long-chain sulfonic compounds also contributes to variance in biosolids concentrations. Sulfonamide precursor compounds as a collective group are detected at a similar frequency as PFOS and often have higher concentrations. Trends in PFAS enrichment for individual PFAS vary at least 3 orders-of-magnitude and generally increase with compound hydrophobicity; however, partitioning of PFAS onto solids in WWTPs is a complex process not easily described nor constrained using experimentally-derived partitioning coefficients.

Emerging and legacy per- and polyfluoroalkyl substances in Daling River and its estuary, Northern China

Strict restriction on legacy per- and polyfluoroalkyl substances (PFASs) has caused a dramatic increase in production and usage of emerging PFASs over the last decades. However, the environmental behaviors of emerging PFASs is largely unknown in Daling River, Northern China. In this study, the potential sources, sediment-water partitioning and substitution trends of PFASs were investigated in overlying water and sediments from Daling River and its estuary. Perfluorooctane sulfonate and 6:2 fluorotelomer sulfonic acid were major compounds, and sodium p-perfluorous nonenoxybenzene sulfonate was first detected. Firefighting foam manufacturing and fluoropolymer production were the main sources of PFASs. Compared to legacy PFASs (C8), the emerging PFASs (C6 - C9) were more incline to distribute into overlying water. Substitution trends indicated 6:2 fluorotelomer sulfonic acid and hexafluoropropylene oxide trimer acid as the important alternatives of perfluorooctane sulfonate and perfluorooctanoic acid, respectively. The results were meaningful for understanding the environmental behaviors of emerging PFASs.

Per- and polyfluoroalkyl substance (PFAS) removal from soil washing water by coagulation and flocculation

Soil washing is currently attracting attention as a promising remediation strategy for land contaminated with per- and polyfluoroalkyl substances (PFAS). In the soil washing process, the contaminant is transferred from the soil into the liquid phase, producing a PFAS contaminated process water. One way to treat such process water is to use coagulation and flocculation; however, few studies are available on the performance of coagulation and flocculation for removing PFAS from such process water. This study evaluated 6 coagulants and flocculants (polyaluminium chloride (PACl), zirconium oxychloride octahydrate, cationic and anionic polyacrylamide, Polyclay 685 and Perfluor Ad®), for the treatment of a proxy PFAS contaminated washing water, spiked with PFAS concentrations found at typical Aqueous Film Forming Foam (AFFF) contaminated sites. PFAS removal efficiencies (at constant pH) varied greatly depending on the coagulants and flocculants, as well as the dosage used and the targeted PFAS. All tested coagulants and flocculants reduced the turbidity by >95%, depending on the dosage. Perfluor Ad®, a specially designed coagulant, showed the highest removal efficiency for all longer chain (>99%) and shorter chain PFAS (>68%). The cationic polyacrylamide polymer removed longer chain PFAS up to an average of 80%, whereas average shorter chain PFAS removal was lower (<30%). The two metal-based coagulants tested, PACl and zirconium, removed longer chain PFAS by up to an average of 61% and shorter chain PFAS up to 48%. Polyclay 685, a mixture of powdered activated carbon (PAC) and aluminium sulphate, removed longer chain PFAS by 90% and shorter chain PFAS on average by 76%, when very high dosages of the coagulant were used (2,000 mg/L). PFAS removal efficiencies correlated with chain length and headgroup. Shorter chain PFAS removal was dependent on electrostatic interaction with the precipitating flocs, whereas for longer chain PFAS, hydrophobic interactions between apolar functional groups and flocs created by the coagulant/flocculant, dissolved organic matter and suspended solids played a major role. The results of this study showed that by selecting the most efficient coagulant and aqueous conditions, a greater amount of PFAS can be removed from process waters in soil washing facilities, and thus included as part of various treatment trains.

Repeated Aqueous Film-Forming Foams Applications: Impacts on Polyfluoroalkyl Substances Retention in Saturated Soil

Historical practices at firefighter-training areas involved repeated aqueous film-forming foams (AFFFs) applications, resulting in source zones characterized by high concentrations of perfluoroalkyl and polyfluoroalkyl substances (PFAS). Repeated applications of AFFF composed of 14 anionic and 23 zwitterionic perfluoroalkyl substances (PFAS) were conducted on a single one-dimensional saturated soil column to quantify PFAS retention. An electrofluorination-based (3M) Milspec AFFF, which was above the mixture's critical micelle concentration (CMC), was at application strength (3%, v/v). Retention and retardation of PFAS mass increased with each successive AFFF addition, although the PFAS concentration profiles for subsequent applications differed from the initial. Greater degree of mass retention and retardation correlated with longer PFAS carbon-fluorine chain length and charged-headgroup type and as a function of AFFF application number. Anionic PFAS were increasingly retained with each subsequent AFFF application, while zwitterionic PFAS exhibited an alternating pattern of sorption and desorption. Surfactant-surfactant adsorption and competition during repeat AFFF applications that are at concentrations above the CMC resulted in adsorbed PFAS from the first application, changing the nature of the soil surface with preferential sorption of anionic PFAS and release of zwitterionic PFAS due to competitive elution. Applying a polyparameter quantitative structure-property relationship developed to describe sorption of AFFF-derived PFAS to uncontaminated, saturated soil was attempted for our experimental conditions. The model had been derived for data where AFFF is below the apparent CMC and our experimental conditions that included the presence of mixed micelles (aggregates consisting of different kinds of surfactants that exhibit characteristics properties different from micelles composed of a single surfactant) resulted in overall PFAS mass retained by an average of 27.3% ± 2.7% (standard error) above the predicted values. The correlation was significantly improved by adding a "micelle parameter" to account for cases where the applied AFFF was above the apparent CMC. Our results highlight the importance of interactions between the AFFF components that can only be investigated by employing complex PFAS mixtures at concentrations present in actual AFFF at application strength, which are above their apparent CMC. In firefighter-training areas (AFFF source zones), competitive desorption of PFAS may result in downgradient PFAS retention when desorbed PFAS become resorbed to uncontaminated soil.

Combination of separation and degradation methods after PFAS soil washing

The current study evaluated a three-stage treatment to remediate PFAS-contaminated soil. The treatment consisted of soil washing, foam fractionation (FF), and electrochemical oxidation (EO). The possibility of replacing the third stage, i.e., EO, with an adsorption process was also assessed. The contamination in the studied soils was dominated by perfluorooctane sulfonate (PFOS), with a concentration of 760 and 19 μg kg-1 in soil I and in soil II, accounting for 97 % and 70 % of all detected per-and polyfluoroalkyl substances (PFAS). Before applying a pilot treatment of soil, soil washing was performed on a laboratory scale, to evaluate the effect of soil particle size, initial pH and a liquid-to-soil ratio (L/S) on the leachability of PFAS. A pilot washing system generated soil leachate that was subsequently treated using FF and EO (or adsorption) and then reused for soil washing. The results indicated that the leaching of PFAS occurred easier in 0.063-1 mm particles than in the soil particles having a size below 0.063 mm. Both alkaline conditions and a continual replacement of the leaching solution increased the leachability of PFAS. The analysis using one-way ANOVA showed no statistical difference in means of PFOS washed out in laboratory and pilot scales. This allowed estimating twenty washing cycles using 120 L water to reach 95 % PFOS removal in 60 kg soil. The aeration process removed 95-99 % PFOS in every washing cycle. The EO and adsorption processes achieved similar results removing up to 97 % PFOS in concentrated soil leachate. The current study demonstrated a multi-stage treatment as an effective and cost-efficient method to permanently clean up PFAS-contaminated soil.

Bioaccumulation Characteristics of Typical Perfluoroalkyl Compounds in Alfalfa Under Salt Stress

Medicago sativa, commonly known as alfalfa, is widely distributed worldwide, known for its strong stress resistance and well-developed root system, making it an important plant in ecological restoration research. To investigate the absorption and transport characteristics of alfalfa for typical perfluoroalkyl substances (PFAS) under salt stress, a 30-day indoor greenhouse experiment was conducted. The results showed that alfalfa exhibited varying degrees of absorption and transport for the selected PFAS. The highest BCF (Bioconcentration Factor) for shoot tissue reached 725.4 (for PFBA), and the highest TF (Translocation Factor) reached 53.8 (for PFPeA). Different PFAS compounds exhibited distinct bioaccumulation behaviors, with short-chain PFAS more readily entering the plant's root system and being transported upwards, while long-chain PFAS tended to adsorb to the surface of the root system. Furthermore, salt stress did not significantly affect the uptake of PFAS by alfalfa. This suggests that alfalfa is salt-tolerant and holds great potential for ecological restoration in short-chain PFAS-contaminated sites.

A systematic investigation of single solute, binary and ternary PFAS transport in water-saturated soil using batch and 1-dimensional column studies: Focus on mixture effects

This study aimed to investigate the transport and release of per- and polyfluoroalkyl substances (PFAS), as single solutes and binary and ternary mixtures, and associated competitive sorption effects in water-saturated soil. Batch sorption isotherm and desorption, and one-dimensional miscible displacement studies were conducted. For the batch study, the mixtures exhibited extensive sorption isotherm nonlinearity at aqueous concentrations exceeding 20 µg/L. At and above this threshold, competitive effects significantly decreased PFAS sorption, mostly affecting perfluorooctanoic acid (PFOA) and perfluorohexane sulfonate (PFHxS). Importantly, mixture effects exacerbated isotherm nonlinearity and may increase the leaching of PFAS in subsurface soil and groundwater. Further, up to 100% desorption occurred for single solutes and mixtures, indicating that the studied PFAS were weakly sorbed. For the column study, at influent concentrations (21 - 27 µg/L, depending on PFAS) near the threshold, PFOA and PFHxS breakthrough curves (BTC) generally exhibited equilibrium (nonlinear) transport, whereas perfluorooctane sulfonate (PFOS) exhibited nonequilibrium transport, with minimal or no mixture effects. Nonequilibrium transport of PFOS was driven by rate-limited sorption, especially as flow interruption tests confirmed the absence of physical nonequilibrium. The sorption distribution coefficients (Kd) from moment and frontal analyses, and 2-site modelling of the BTC, were consistent with the batch-derived Kd, although comparatively smaller. Such discrepancies may limit the applicability of batch-derived Kd values for predictive transport modelling purposes. Overall, understanding mixture impacts may aid effective predictive modelling of PFAS transport and leaching, especially in aqueous film forming foam (AFFF)-source zone areas associated with elevated PFAS concentrations. At low or environmental PFAS concentrations, mixture effects can be expected to be play a minor role in influencing PFAS transport.

Delineation of a PFOA Plume and Assessment of Data Gaps in its Conceptual Model Using PlumeSeeker™

An accurate conceptual site model (CSM) and plume-delineation at contamination sites are pre-requisites for successful remediation and for satisfying regulators and stakeholders. PlumeSeeker™ is well-suited for assessing data gaps in CSMs by using available site data and for identifying the optimal number and locations of sampling locations to delineate contaminant plumes. It is an enhancement of a university research code for plume delineation using geostatistical and stochastic modeling integrated with the groundwater modeling software MODFLOW-SURFACT™. PlumeSeeker™ increases the overall confidence in the location of the plume boundary through a variance-reduction approach that selects existing- or new monitoring wells for sampling based on minimizing the uncertainty in plume boundary and on new field information. Applicable at sites with or without existing monitoring wells, PlumeSeeker™ is particularly powerful for optimally allocating project resources (labor, well installation, and laboratory costs) between existing wells and sampling at new locations. An application of PlumeSeeker™ at Lakehurst, the naval component of Joint Base McGuire-Dix-Lakehurst in New Jersey, demonstrates how the cost of delineating the migration pathway of a perfluorooctanoic acid (PFOA) plume can be minimized by requiring only 9 new sampling locations in addition to samples from 2 existing wells for achieving a 70% reduction in plume uncertainty. In addition, the use of available site data in three different scenarios identified CSM data-gaps in the source area and in the interaction between Manapaqua Branch and groundwater, where the observed high concentration in this area could have resulted from a combination of groundwater migration and induced infiltration.

GenX uptake by wheat and rice in flooded and non-flooded soils: a greenhouse experiment

GenX (hexafluoropropylene oxide dimer acid) belongs to the group of per- and poly-fluoroalkyl substance (PFAS) compounds introduced to replace perfluorooctanoic acid (PFOA), which has been phased out in industrial and consumer product formulations. While GenX has been investigated in lab animals, there is limited information available regarding its uptake and translocation in wheat and rice. This study reports on a greenhouse experiment in which wheat and rice grown under flooded and non-flooded conditions were exposed to two GenX concentrations in the soil (0.4 mg kg-1 and 2 mg kg-1). GenX was analysed in the soil, porewater and shoots using targeted liquid chromatography-tandem mass spectroscopy (LC-MS/MS) analysis. Extractable organic fluorine (EOF) was determined using high-resolution continuum source graphite furnace molecular absorption spectrometry (HR-GFMAS) instrument. Results showed that different species took up different amounts of GenX. The GenX concentration in rice shoots was found to be 2.34 (± 0.45) and 4.11 (± 0.87) μg g-1 under flooded and non-flooded conditions, respectively, at a low exposure level. At high exposure, the GenX concentrations in flooded and non-flooded rice shoots increased threefold to 10.4 (± 0.41) and 13.4 (± 0.72) μg g-1, respectively. Wheat shoots showed similar concentrations and increases between low- and high-level exposure. The translocation factor was significantly higher (P = 0.013) in non-flooded rice compared to flooded rice. The GenX bioaccumulation behaviours under the same culture conditions (e.g. temperature, humidity, light, same GenX concentration in the soil) were significantly different in non-flooded and flooded rice (P < 0.001). Non-flooded rice plants displayed a higher level of GenX bioaccumulation than flooded ones. Following exposure to GenX, flooded rice plants showed a reduction in biomass (25%) compared to the control plants (P < 0.014). Our findings indicate that GenX is a bioaccumulative compound, the presence of which likely inhibits the growth of plants.

Geophysical signatures of soil AFFF contamination from spectral induced polarization and low field nuclear magnetic resonance methods

Few field methods are available for characterizing source zones impacted with aqueous film forming foam (AFFF). Non-invasive geophysical characterization of AFFF source zone contamination in situ could assist with the delineation and characterization of these sites, allowing for more informed sampling regimes aimed at quantifying subsurface poly- and perfluoroalkyl substances (PFAS) contamination. We present initial results from the investigation of the sensitivity of two existing surface and borehole-deployable geophysical technologies, spectral induced polarization (SIP), and low field nuclear magnetic resonance (NMR), to soils impacted with AFFF. To investigate the sensitivity of these methods to AFFF-impacted soil, bench-scale column experiments were conducted on samples consisting of natural and synthetic soils and groundwater. While our findings do not show strong evidence of NMR sensitivity to soil PFAS contamination, we do find evidence that SIP has sufficient sensitivity to detect sorption of AFFF constituents (including PFAS) to soils. This finding is based on evidence that AFFF constituents associated with the pore surface produce a measurable polarization response in both freshly impacted synthetic soils and in soils historically impacted with AFFF. Our findings encourage further exploration of the SIP method as a technology for characterizing contaminant concentrations across AFFF source zones.

In vitro modeling of the post-ingestion bioaccessibility of per- and polyfluoroalkyl substances sorbed to soil and house dust

Per- and polyfluoroalkyl substances (PFAS) are regularly found in soils and dusts, both of which can be consumed by children at relatively high amounts. However, there is little data available to model the bioaccessibility of PFAS in soils and dusts when consumed or to describe how the physiochemical properties of PFAS and soils/dusts might affect bioaccessibility of these chemicals. Because bioaccessibility is an important consideration in estimating absorbed dose for exposure and risk assessments, in the current study, in vitro assays were used to determine bioaccessibility of 14 PFAS in 33 sets of soils and dusts. Bioaccessibility assays were conducted with and without a sink, which was used to account for the removal of PFAS due to their movement across the human intestine. Multiple linear regression with backward elimination showed that a segmented model using PFAS chain length, number of branches, and percent total organic carbon explained 78.0%-88.9% of the variability in PFAS bioaccessibility. In general, PFAS had significantly greater bioaccessibility in soils relative to dusts and the addition of a sink increased bioaccessibility in the test system by as much as 10.8% for soils and 20.3% for dusts. The results from this study indicate that PFAS bioaccessibility in soils and dusts can be predicted using a limited set of physical chemical characteristics and could be used to inform risk assessment models.

Effect of heavy metal co-contaminants on the sorption of thirteen anionic per- and poly-fluoroalkyl substances (PFAS) in soils

Understanding the sorption behavior of per- and poly-fluoroalkyl substances (PFAS) in soils are essential for assessing their mobility and risk in the environment. Heavy metals often coexist with PFAS depending on the source and history of contamination. In this study, we investigated the effect of heavy metal co-contaminants (Pb2+, Cu2+ and Zn2+) on the sorption of 13 anionic PFAS with different perfluorocarbon chain length (C3-C9) in two soils with different properties. Results revealed that Pb2+, Cu2+ and Zn2+ had little effect on the sorption of most short-chain compounds, while the presence of these heavy metals enhanced the sorption of long-chain PFAS in two soils. The distribution coefficients (Kd) of several long-chain PFAS linearly increased with increasing concentrations of heavy metal, especially in the presence of Pb2+ (ΔKd/Δ [Pb2+] > 3 for PFOS and PFNA vs <1 for PFPeS and PFHxS). While several mechanisms may have contributed to the enhancement of sorption of PFAS, the heavy metals most likely contributed through enhanced hydrophobic interactions of PFAS by neutralizing the negative charge of adsorption surfaces in soils and thus making it more favorable for their partitioning onto the solid phase. Moreover, the increase in the concentrations of heavy metals led to a decrease in the pH of the system and promoted sorption of long-chain compounds, especially in soil with lower organic carbon content. Overall, this study provides evidence that the presence of co-existing heavy metal cations in soils can significantly enhance the sorption of long-chain PFAS onto soil, thereby potentially limiting their mobility in the environment.

Multicomponent PFAS sorption and desorption in common commercial adsorbents: Kinetics, isotherm, adsorbent dose, pH, and index ion and ionic strength effects

The adsorption and desorption of 9 PFAS, including 3 perfluoroalkyl sulphonic and 6 perfluoroalkyl carboxylic acids, in artificial groundwater was investigated using 3 commercial adsorbents that comprised a powdered activated carbon (PAC), a surface-modified organoclay (NMC+n), and a carbonaceous organic amendment (ROAC). Sorption kinetics and isotherms of PFAS, as well as the effects of adsorbent dose, pH, index ion and ionic strength on PFAS adsorption and desorption were investigated. Sorption of multicomponent PFAS in the adsorbents was rapid, especially for NMC+n and ROAC, regardless of PFAS chain length. The sorption and (and especially) desorption of PFAS in the adsorbents was impacted by the pH, index ion, and ionic strength of simulated groundwater, especially for the short chain PFAS, with only minimal impacts on NMC+n and PAC compared to ROAC. Although the potential mineral and charged constituents of the adsorbents contributed to the adsorption of short chain PFAS through electrostatic interactions, these interactions were susceptible to variable groundwater chemistry. Hydrophobic interactions also played a major role in facilitating and increasing PFAS sorption, especially in adsorbents with aliphatic functional groups. The desorption of PFAS from the adsorbents was below 8 % when the aqueous phase was deionised water, with no measurable desorption for NMC+n. In contrast, the desorption of short chain PFAS in simulated groundwater increased substantially (30-100 %) in the adsorbents, especially in ROAC and NMC+n, but more so with ROAC. In general, the three adsorbents exhibited strong stability for the long chain PFAS, especially the perfluoroalkyl sulphonic acids, with minimal to no sorption reversibility under different pH and ionic composition of simulated groundwater. This study highlights the importance of understanding not only the sorption of PFAS in groundwater using adsorbents, but also the desorption of PFAS, which may be useful for decision making during the ex-situ and in-situ treatment of PFAS-contaminated groundwater.

Tracing the Bioaccessibility of Per- and Polyfluoroalkyl Substances in Fish during Cooking Treatment

The effect of cooking on the contents of per- and polyfluoroalkyl substances (PFAS) in foods has been widely studied, but whether cooking-induced structural and chemical modifications in foods affect the oral bioaccessibility of PFAS remains largely unknown. In this study, three kinds of fishes with different fat contents were selected, and the bioaccessibility of PFAS during cooking treatment (steaming and frying) was evaluated using in vitro gastrointestinal simulation with gastric lipase addition. The results showed that related to their molecular structures, the bioaccessibility of an individual PFAS varied greatly, ranging from 26.0 to 108.1%. Cooking can reduce the bioaccessibility of PFAS, and steaming is more effective than oil-frying; one of the possible reasons for this result is that the PFAS is trapped in protein aggregates after heat treatment. Fish lipids and cooking oil ingested with meals exert different effects on the bioaccessibility of PFAS, which may be related to the state of the ingested lipid/oil and the degree of unsaturation of fatty acids. Gastric lipase boosted the release of long-chain PFAS during in vitro digestion, indicating that the degree of lipolysis considerably influences the bioaccessibility of hydrophobic PFAS. Estimated weekly PFAS intakes were recalibrated using bioaccessibility data, enabling more accurate and reliable dietary exposure assessments.

Investigating rate-limited sorption, sorption to air-water interfaces, and colloid-facilitated transport during PFAS leaching

Various sorption processes affect leaching of per- and polyfluoroalkyl substances (PFAS) such as PFOA and PFOS. The objectives of this study are to (1) compare rate-limited leaching in column and lysimeter experiments, (2) investigate the relevance of sorption to air-water interfaces (AWI), and (3) examine colloid-facilitated transport as a process explaining early experimental breakthrough. A continuum model (CM) with two-domain sorption is used to simulate equilibrium and rate-limited sorption. A random walk particle tracking (PT) model was developed and applied to analyze complex leaching characteristics. Results show that sorption parameters derived from column experiments underestimate long-term PFOA leaching in lysimeter experiments due to early depletion, suggesting that transformation of precursors contributes to the observed long-term leaching in the lysimeters (approximately 0.003 µg/kg/d PFOA). Both models demonstrate that sorption to AWI is the dominant retention mechanism for PFOS in lysimeter experiments, with retardation due to AWI being 3 (CM) to 3.7 (PT) times higher than retardation due to solid phase sorption. Notably, despite a simplified conception of AWI sorption, the PT results are closer to the observations. The PT simulations demonstrate possible colloid-facilitated transport at early time; however, results using substance-specific varying transport parameters align better with the observations, which should be equal if colloid-facilitated transport without additional kinetics is the sole mechanism affecting early breakthrough. Possibly, rate-limited sorption to AWI is relevant during the early stages of the lysimeter experiment. Our findings demonstrate that rate-limited sorption is less relevant for long-term leaching under field conditions compared to transformation of precursors and that sorption to AWI can be the dominant retention mechanism on contaminated sites. Moreover, they highlight the potential of random walk particle tracking as a practical alternative to continuum models for estimating the relative contributions of various retention mechanisms.

Retention and transport of PFOA and its fluorinated substitute, GenX, through water-saturated soil columns

Perfluoro-2-propoxypropanoic acid (GenX) has emerged as a substitute for perfluorooctanoic acid (PFOA) especially since PFOA was listed among the persistent organic pollutants (POPs) by the Stockholm Convention in 2019. However, limited knowledge exists regarding the behavior and mobility of GenX in natural soils hindering the prediction of its environmental fate. This study investigated the mobility and retention of GenX and PFOA in soils under batch and water-saturated flow-through conditions. Batch experiments revealed that GenX has a lower binding affinity to soil than longer-chained PFOA, potentially threatening groundwater resources. Unlike metal-oxides/minerals (ferrihydrite, gibbsite and manganese dioxide), biochar (BC) and activated carbon (AC) amendments significantly enhanced the sorption of both GenX and PFOA in soil. Sorption data on minerals and carbonaceous materials implied that for shorter-chained GenX, the predominant mode of sorption was through electrostatic (ionic) interactions, while for longer-chained PFOA, hydrophobic interactions became progressively more important with increasing chain length. The dynamic flow experiments demonstrated that these soil amendments enhanced the retention of both compounds, thereby decreasing their mobility. Simultaneous injection of both compounds into columns pre-loaded with either PFOA or GenX increased their retardation. GenX sorption was more affected by pre-sorbed PFOA compared to the minimal impact of pre-loaded GenX on PFOA sorption. A newly developed reactive transport model, which incorporates a two-site sorption model and accounts for kinetic-limited processes, accurately predicted the sorption and transport of both compounds in single and binary contamination systems. These findings have important implications for predicting and assessing the fate and mobility of per- and polyfluoroalkyl substances (PFAS) in soils and groundwaters.

Revising the EPA Dilution-Attenuation Soil Screening Model for PFAS

Per and polyfluoroalkyl substances (PFAS) have been shown to be ubiquitous in the environment, and one issue of critical concern is the leaching of PFAS from soil to groundwater. The risk posed by contaminants present in soil is often assessed in terms of the anticipated impact to groundwater through the determination of soil screening levels (SSLs). The U.S. Environmental Protection Agency (EPA) established a soil screening model for determining SSLs. However, the model does not consider the unique retention properties of PFAS and, consequently, the SSLs established with the model may not represent the actual levels that are protective of groundwater quality. The objective of this work is to revise the standard EPA SSL model to reflect the unique properties and associated retention behavior of PFAS. Specifically, the distribution parameter used to convert soil porewater concentrations to soil concentrations is revised to account for adsorption at the air-water interface. Example calculations conducted for PFOS and PFOA illustrate the contrasting SSLs obtained with the revised and standard models. A comparison of distribution parameters calculated for a series of PFAS of different chain length shows that the significance of air-water interfacial adsorption can vary greatly as a function of the specific PFAS. Therefore, the difference between SSLs calculated with the revised versus standard models will vary as a function of the specific PFAS, with greater differences typically observed for longer-chain PFAS. It is anticipated that this revised model will be useful for developing improved SSLs that can be used to enhance site investigations and management for PFAS-impacted sites.

Prediction of perfluoroalkyl acids (PFAAs) in homegrown eggs: Insights into abiotic and biotic factors affecting bioavailability and derivation of potential remediation measures

Homegrown eggs from free-ranging laying hens often contain elevated concentrations of perfluoroalkyl acids (PFAAs). However, it is unclear which factors contribute to these relatively large exposure risk scenarios. Moreover, existing bioavailability and modeling concepts of conventional organic pollutants cannot be generalized to PFAAs due to their different physicochemical soil interactions. Therefore, there is an urgent need for empirical models, based on real-world data, to provide insights into how (a)biotic factors affect the bioavailability to eggs. To this end, 17 targeted analytes were analyzed in abiotic (i.e. rainwater, soil; both N = 101) matrices and homegrown eggs (N = 101), which were sampled in 101 private gardens across Flanders (Belgium) in 2019, 2021 and 2022. Various soil characteristics were measured to evaluate their role in affecting PFAA bioavailability to the eggs. Finally, PFAAs were measured in potential feed sources (i.e. homegrown vegetable and earthworm pools; respectively N = 49 and N = 34) of the laying hens to evaluate their contribution to the egg burden. Modeling suggested that soil was a major exposure source to laying hens, accounting for 16-55% of the total variation in egg concentrations for dominant PFAAs. Moreover, concentrations in vegetables and earthworms for PFBA and PFOS, respectively, were significantly positively related with corresponding egg concentrations. Predictive models based on soil concentrations, total organic carbon (TOC), pH, clay content and exchangeable cations were successfully developed for major PFAAs, providing possibilities for time- and cost-effective risk assessment of PFAAs in homegrown eggs. Among other soil characteristics, TOC and clay content were related with lower and higher egg concentrations for most PFAAs, respectively. This suggests that bioavailability of PFAAs to the eggs is driven by complex physicochemical interactions of PFAAs with TOC and clay. Finally, remediation measures were formulated that are readily applicable to lower PFAA exposure via homegrown eggs.

Research Priorities for the Environmental Risk Assessment of Per- and Polyfluorinated Substances

Per- and polyfluorinated substances (PFAS) are a group of thousands of ubiquitously applied persistent industrial chemicals. The field of PFAS environmental research is developing rapidly, but suffers from substantial biases toward specific compounds, environmental compartments, and organisms. The aim of our study was therefore to highlight current developments and to identify knowledge gaps and subsequent research needs that would contribute to a comprehensive environmental risk assessment for PFAS. To this end, we consulted the open literature and databases and found that knowledge of the environmental fate of PFAS is based on the analysis of <1% of the compounds categorized as PFAS. Moreover, soils and suspended particulate matter remain largely understudied. The bioavailability, bioaccumulation, and food web transfer studies of PFAS also focus on a very limited number of compounds and are biased toward aquatic biota, predominantly fish, and less frequently aquatic invertebrates and macrophytes. The available ecotoxicity data revealed that only a few PFAS have been well studied for their environmental hazards, and that PFAS ecotoxicity data are also strongly biased toward aquatic organisms. Ecotoxicity studies in the terrestrial environment are needed, as well as chronic, multigenerational, and community ecotoxicity research, in light of the persistency and bioaccumulation of PFAS. Finally, we identified an urgent need to unravel the relationships among sorption, bioaccumulation, and ecotoxicity on the one hand and molecular descriptors of PFAS chemical structures and physicochemical properties on the other, to allow predictions of exposure, bioaccumulation, and toxicity. Environ Toxicol Chem 2023;42:2302-2316. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Effective stabilization of per- and polyfluoroalkyl substances (PFAS) precursors in wastewater treatment sludge by surfactant-modified clay

The application of biosolids or treated sewage sludge containing per- and polyfluoroalkyl substances (PFAS) in agricultural lands and the disposal of sludge in landfills pose high risks to humans and the environment. Although PFAS precursors have not been regulated yet, their potential transformation to highly regulated perfluoroalkyl acids (PFAAs) may enable them to serve as a long-term source and make remediation of PFAAs a continuing task. Therefore, treating precursors in sewage sludge is even more, certainly not less, critical than treating or removing PFAAs. In this study, a green surfactant-modified clay sorbent was evaluated for its efficacy in stabilizing two representative PFAA precursors in sludge, e.g., N-ethyl perfluorooctane sulfonamido acetic acid (N-EtFOSAA) and 6:2 fluorotelomer sulfonic acid (6:2 FTSA), in comparison with unmodified clay and powdered activated carbon (PAC). Results showed N-EtFOSAA and 6:2 FTSA exhibited distinct adsorption behaviors in the sludge without sorbents due to their different physicochemical properties, such as hydrophobicity and functional groups. Among the three sorbents, the modified clay reduced the water leachability of N-EtFOSAA and 6:2 FTSA by 91.5% and 95.4%, respectively, compared to controls without amendments at the end of the experiment (47 days). Within the same duration, PAC decreased the water leachability of N-EtFOSAA and 6:2 FTSA by 60.6% and 37.3%, respectively. At the same time, the unmodified clay demonstrated a poor stabilization effect and even promoted the leaching of precursors. These findings suggested that the modified clay had the potential for stabilization of precursors, while negatively charged and/or hydrophilic sorbents, such as the unmodified clay, should be avoided in the stabilization process. These results could provide valuable information for developing effective amendments for stabilizing PFAS in sludge or biosolids. Future research should evaluate the long-term effect of the stabilization approach using actual sludge from wastewater treatment facilities.

Iron-Nitrogen Amendment Reduced Perfluoroalkyl Acids' Phyto-Uptake in the Wheat-Soil Ecosystem: Contributions of Dissolved Organic Matters in Soil Solution and Root Extracellular Polymeric Substances

Understanding the mechanisms underlying perfluoroalkyl acids (PFAAs) translocation, distribution, and accumulation in wheat-soil ecosystems is essential for agricultural soil pollution control and crop ecological risk assessment. This study systematically investigated the translocation of 13 PFAAs under different iron and nitrogen fertilization conditions in a wheat-soil ecosystem. Short-chain PFAAs including PFBA, PFPeA, PFHxA, and PFBS mostly accumulated in soil solution (10.43-55.33%) and soluble extracellular polymeric substances (S-EPS) (11.39-14.77%) by the adsorption to amino- (-NH2) and hydroxyl (-OH) groups in dissolved organic matter (DOM). Other PFAAs with longer carbon chain lengths were mostly distributed on the soil particle surface by hydrophobic actions (74.63-94.24%). Iron-nitrogen amendments triggered (p < 0.05) soil iron-nitrogen cycling, rhizospheric reactive oxygen species fluctuations, and the concentration increases of -NH2 and -OH in the DOM structure. Thus, the accumulation capacity of PFAAs in soil solution and root EPS was increased. In sum, PFAAs' translocation from soil particles to wheat root was synergistically reduced by iron and nitrogen fertilization through increased adsorption of soil particles (p < 0.05) and the retention of soil solution and root EPSs. This study highlights the potential of iron-nitrogen amendments in decreasing the crop ecological risks to PFAAs' pollution.

First determination on two kinds of microplastic-air partition coefficients of seven per- and polyfluoroalkyl substances under environmentally relative conditions: Experiment measurement and model prediction

Microplastics (MPs) in the environment are the sink and vector of organic contaminants, including per- and polyfluoroalkyl substances (PFASs). Although PFASs are low- and non-volatile compounds, they have the potential to partition and diffuse from MP into the gas phase in the environmental functions. Herein, the MP-air partition coefficient (KPA) of seven PFASs was measured using a solid-fugacity meter. The PFAS KPA values in two MPs (high-density polyethylene (HDPE) and thermoplastic polyurethane (TPU)) were determined under different times, temperatures, and relative humidities (RH), and a model was developed to predict the PFAS KPA values based on the measured data. The results showed that the KPA of PFASs increased with the prolonged partition time until 90 mins, and higher temperature and RH facilitated the distribution of PFASs in MPs into the air phase, leading to smaller KPA values. Moreover, the derived equation for predicting PFAS log KPA values was robust with 0.79 of an adjusted square of correlation coefficient (R2adjusted = 0.79) and 0.35 of root mean squared error (RMSE = 0.35). These findings provided the first knowledge for understanding the partition behavior and fate of PFASs in the MP-air microenvironment.

Low concentrations of perfluoroalkyl acids (PFAAs) in municipal drinking water associated with serum PFAA concentrations in Swedish adolescents

While highly contaminated drinking water (DW) is a major source of exposure to perfluoroalkyl acids (PFAAs), the contribution of low-level contaminated DW (i.e. < 10 ng/L of individual PFAAs) to PFAA body burdens has rarely been studied. To address this knowledge gap, we evaluated the association between concentrations of perflurooctanoic acid (PFOA), perfluorononanoic acid (PFNA), perfluorohexane sulfonic acid (PFHxS) and perfluorooctane sulfonic acid (PFOS), and their sum (∑4PFAAs) in DW and serum in Swedish adolescents using weighted least squares regression. We paired serum PFAA concentrations in adolescents (age 10-21 years, n = 790) from the dietary survey Riksmaten Adolescents 2016-17 (RMA) with mean PFAA concentrations in water samples collected in 2018 from waterworks (n = 45) supplying DW to the participant residential and school addresses. The median concentrations of individual PFAAs in DW were < 1 ng/L. Median concentrations of PFNA and PFHxS in serum were < 1 ng/g, while those of PFOA and PFOS were 1-2 ng/g. Significant positive associations between PFAA concentrations in DW and serum were found for all four PFAAs and ∑4PFAAs, with estimated serum/DW concentration ratios ranging from 210 (PFOA) to 670 (PFHxS), taking exposure from sources other than DW (background) into consideration. The mean concentrations of PFHxS and ∑4PFAA in DW that would likely cause substantially elevated serum concentrations above background variation were estimated to 0.9 ng/L and 2.4 ng/L, respectively. The European Food Safety Authority has determined a health concern concentration of 6.9 ng ∑4PFAAs/mL serum. This level was to a large degree exceeded by RMA participants with DW ∑4PFAA concentrations above the maximum limits implemented in Denmark (2 ng ∑4PFAAs/L) and Sweden (4 ng ∑4PFAAs/L) than by RMA participants with DW concentrations below the maximum limits. In conclusion, PFAA exposure from low-level contaminated DW must be considered in risk assessment for adolescents.

Analysis of a Passive Sampling Device to Assess the Behavior of Per- and Polyfluoroalkyl Substances in Sediments

Per- and polyfluoroalkyl substances (PFAS) are an emerging class of compounds that cause health and environmental problems worldwide. In aquatic environments, PFAS may bioaccumulate in sediment organisms, which can affect the health of organisms and ecosystems. As such, it is important to develop tools to understand their bioaccumulation potential. In the present study, the uptake of perfluorooctanoic acid (PFOA) and perfluorobutane sulfonic acid (PFBS) from sediments and water was assessed using a modified polar organic chemical integrative sampler (POCIS) as a passive sampler. While POCIS has previously been used to measure time-weighted concentrations of PFAS and other compounds in water, in our study, the design was adapted for analyzing contaminant uptake and porewater concentrations in sediments. The samplers were deployed into seven different tanks containing PFAS-spiked conditions and monitored over 28 days. One tank contained only water with PFOA and PFBS, three tanks contained soil with 4% organic matter, and three tanks contained soil combusted at 550 °C to minimize the influence of labile organic carbon. The uptake of PFAS from the water was consistent with previous research using a sampling rate model or simple linear uptake. For the samplers placed in the sediment, the uptake process was explained well using a mass transport based on the external resistance from the sediment layer. Uptake of PFOS in the samplers occurred faster than that of PFOA and was more rapid in the tanks containing the combusted soil. A small degree of competition was observed between the two compounds for the resin, although these effects are unlikely to be significant at environmentally relevant concentrations. The external mass transport model provides a mechanism to extend the POCIS design for measuring porewater concentrations and sampling releases from sediments. This approach may be useful for environmental regulators and stakeholders involved in PFAS remediation. Environ Toxicol Chem 2023;42:2171-2183. © 2023 SETAC.

Toward systematic understanding of adsorptive removal of legacy and emerging per-and polyfluoroalkyl substances (PFASs) by various activated carbons (ACs)

Per-and polyfluoroalkyl substances (PFASs) have received great attention due to their persistence, bioaccumulation and toxicity. Various activated carbons (ACs) exhibit wide variability in adsorptive performance towards PFASs. In order to gain a systematic understanding of adsorptive removal of legacy and emerging PFASs by ACs, the adsorption of ten PFASs on various ACs was comprehensively investigated. Results showed that granular activated carbon-1 (GAC-1) and powdered activated carbon-1 (PAC-1) removed more than 90% of all target PFASs. Particle size, surface charge, and micropores quantity of ACs were closely related to their performance for PFASs removal. Electrostatic interaction, hydrophobic interaction, surface complexation and hydrogen bonding were the adsorption mechanisms, with hydrophobic interaction being the predominant adsorptive force. Physical and chemical adsorption were both involved in PFAS adsorption. The removal rates of PFASs by GAC-1 decreased from 93%-100% to 15%-66% in the presence of 5 mg/L fulvic acid (FA). GAC was able to remove more PFASs under acidic medium, whereas PAC removed hydrophobic PFASs better under the neutral medium. The removal rates of PFASs by GAC-3 increased significantly from 0%-21% to 52%-97% after being impregnated with benzalkonium chlorides (BACs), demonstrating the superiority of this modification method. Overall, this study provided theoretical support for removing PFASs from water phase with ACs.

Phytoextraction of per- and polyfluoroalkyl substances (PFAS) and the influence of supplements on the performance of short-rotation crops

Per- and polyfluoroalkyl substances (PFAS) are anthropogenic compounds threatening water quality and food safety worldwide. Phytoremediation is a nature-based, cost-effective, and scalable solution with high potential for treating PFAS-contaminated sites. However, there is a large knowledge gap regarding choice of plant species and methods to enhance performance. This study assessed the PFAS phytoextraction potential of sunflower (Helianthus annuus), mustard (Brassica juncea), and industrial hemp (Cannabis sativa) in a greenhouse experiment, using inorganic fertilizer and a microbial mixture as supplements. PFAS concentrations were measured using UPLC-MS/MS, and bioconcentration factors for different plant tissues and removal efficiency were determined. Perfluoroalkyl carboxylic acid (PFCA) accumulation was 0.4-360 times higher than that of perfluoroalkyl sulfonic acid (PFSA) homologues of similar perfluorocarbon chain length. Inorganic fertilizer significantly (p < 0.001) reduced PFAS concentration in all plant tissues, whereas the microbial mixture tested did not affect PFAS concentration. PFAS uptake ranged from 0.2 to 33% per crop cycle. Overall, the potential number of crop cycles required for removal of 90% of individual PFAS ranged from six (PFPeA) to 232 (PFOA) using sunflower, 15 (PFPeA) to 466 (PFOS) using mustard and nine (PFPeA) to 420 (PFOS) using Hemp. In this study, the percentage of PFAS removal by plants was determined, and an estimation of the time required for PFAS phytoextraction was determined for the first time. This information is important for practical phytoremediation applications.

Source, transport, and fate of perfluoroalkyl acids (PFAAs) in turbid bay environments: Significant roles of suspended sediment and water column stratification

The coastal area was the major region receiving pollution from land-based sources into the sea. Perfluoroalkyl acids (PFAAs) in famous bays had aroused wide concern, but the importance of underdeveloped or small bays with notable levels of PFAAs were often neglected. Moreover, the roles of suspended sediment (SPS) and water column stratification on PFAA behaviors were unclear. In this study, PFAAs distribution in multiphase-multilayer in four underdeveloped bays (two urban bays and two island bays) were investigated. The urban bays not only had higher PFAA contamination but also posed a greater threat of short-chain PFAAs in water-SPS-sediment system than the island bays. The major source of PFAAs in water and SPS was domestic sewage in urban bays and was rainfall-runoff in island bays. Water column stratification with higher PFAA partition in water-SPS system in the surface layer than in the bottom layer was only found in the urban bays due to the higher human activity intensity. These provided new perspectives for managing emerging contaminants and establishing water quality criteria in the turbid coastal environment. The key role of SPS as a carrier offered possibilities to accurately differentiate the effects of dissolved and particulate PFAAs on bioavailability.

Occurrences and fates of per- and polyfluoralkyl substances in textile dyeing wastewater along full-scale treatment processes

Industrial wastewater is a substantial source of per- and polyfluoroalkyl substances (PFASs) in the environment. However, very limited information is available on the occurrences and fates of PFASs along industrial wastewater treatment processes, particularly for the textile dyeing industry where PFASs occur extensively. Herein, the occurrences and fates of 27 legacy and emerging PFASs were investigated along the processes of three full-scale textile dyeing wastewater treatment plants (WWTPs) based on UHPLC-MS/MS in combination with self-developed solid extraction protocol featuring selective enrichment for ultrasensitive analysis. The total PFASs ranged at 630-4268 ng L-1 in influents, 436-755 ng L-1 in effluents, and 91.5-1182 μg kg-1 in the resultant sludge. PFAS species distribution varied among WWTPs, with one WWTP dominated by legacy perfluorocarboxylic acids while the other two dominated by emerging PFASs. Perfluorooctane sulfonate (PFOS) was trivial in the effluents from all the three WWTPs, indicating its diminished use in textile industry. Various emerging PFASs were detected at different abundances, demonstrating their use as alternatives to legacy PFASs. Most conventional processes of the WWTPs were inefficient in removing PFASs, especially for the legacy PFASs. The microbial processes could remove the emerging PFASs to different extents, whereas commonly elevated the concentrations of legacy PFASs. Over 90% of most PFASs could be removed by reverse osmosis (RO) and was enriched into the RO concentrate accordingly. The total oxidizable precursors (TOP) assay revealed that the total concentration of PFASs was increased by 2.3-4.1 times after oxidation, accompanied by formation of terminal perfluoroalkyl acids (PFAAs) and degradation of emerging alternatives to various extents. This study is believed to shed new light on the monitoring and management of PFASs in industries.

Linking drivers of plant per- and polyfluoroalkyl substance (PFAS) uptake to agricultural land management decisions

Widespread contamination of the per- and polyfluoroalkyl substance (PFAS) in agricultural areas is largely attributed to the application of sewage sludge in which the PFAS can be concentrated. This creates a pathway for these contaminants to enter the food chain and, by extension, causes human health and economic concerns. One barrier to managing land with PFAS contamination is the variation in reported plant uptake levels across studies. A review of the literature suggests that the variation in plant uptake is influenced by a host of factors including the composition of PFAS chemicals, soil conditions, and plant physiology. Factors include (1) the chemical components of the PFAS such as the end group and chain length; (2) drivers of soil sorption such as the presence of soil organic matter (SOM), multivalent cation concentration, pH, soil type, and micropore volume; and (3) crop physiological features such as fine root area, percentage of mature roots, and leaf blade area. The wide range of driving factors highlights a need for research to elucidate these mechanisms through additional experiments as well as collect more data to support refined models capable of predicting PFAS uptake in a range of cropping systems. A conceptual framework presented here links drivers of plant PFAS uptake found in the literature to phytomanagement approaches such as modified agriculture or phytoremediation to provide decision support to land managers.

Management of per- and polyfluoroalkyl substances (PFAS)-laden wastewater sludge in Maine: Perspectives on a wicked problem

This article discusses the challenges and potential solutions for managing wastewater sludge that contains per- and polyfluoroalkyl substances (PFAS), using the experience in Maine as a guide toward addressing the issue nationally. Traditional wastewater treatment, designed to remove excess organic waste and nutrients, does not eliminate persistent toxic pollutants like PFAS, instead partitioning the chemicals between discharged effluent and the remaining solids in sludge. PFAS chemistry, the molecular size, the alkyl chain length, fluorine saturation, the charge of the head group, and the composition of the surrounding matrix influence PFAS partitioning between soil and water. Land application of sludge, incineration, and storage in a landfill are the traditional management options. Land application of Class B sludge on agricultural fields in Maine peaked in the 1990s, totaling over 2 × 106 cu yd over a 40-year period and has contaminated certain food crops and animal forage, posing a threat to the food supply and the environment. Additional Class A EQ (Exceptional Quality) composted sludge was also applied to Maine farmland. The State of Maine banned the land application of wastewater sludge in August 2022. Most sludge was sent to the state-owned Juniper Ridge Landfill, which accepted 94 270 tons of dewatered sludge in 2022, a 14% increase over 2019. Between 2019 and 2022, the sum of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) concentrations in sludge sent to the landfill ranged from 1.2 to 104.9 ng/g dw. In 2022, the landfill generated 71.6 × 106 l of leachate. The concentration of sum of six PFAS in the leachate increased sixfold between 2021 and 2022, reaching 2 441 ng/l. The retention of PFAS within solid-waste landfills and the potential for long-term release of PFAS through liners into groundwater require ongoing monitoring. Thermal treatment, incineration, or pyrolysis can theoretically mineralize PFAS at high temperatures, yet the strong C-F bond and reactivity of fluorine require extreme temperatures for complete mineralization. Future alternatives may include interim options such as preconditioning PFAS with nonpolar solvents prior to immobilization in landfills, removing PFAS from leachate, and interrupting the cycle of PFAS moving from landfill, via leachate, to wastewater treatment, and then back to the landfill via sludge. Long-term solutions may involve destructive technologies such as electron beam irradiation, electrochemical advanced oxidation, or hydrothermal liquefaction. The article highlights the need for innovative and sustainable solutions for managing PFAS-contaminated wastewater sludge.

Environmental Fate of Cl-PFPECAs: Accumulation of Novel and Legacy Perfluoroalkyl Compounds in Real-World Vegetation and Subsoils

Per- and polyfluoroalkyl substances (PFAS) are globally distributed and potentially toxic compounds. We report accumulation of chloroperfluoropolyethercarboxylates (Cl-PFPECAs) and perfluorocarboxylates (PFCAs) in vegetation and subsoils in New Jersey. Lower molecular weight Cl-PFPECAs, containing 7-10 fluorinated carbons, and PFCAs containing 3-6 fluorinated carbons were enriched in vegetation relative to surface soils. Subsoils were dominated by lower molecular weight Cl-PFPECAs, a divergence from surface soils. Contrastingly, PFCA homologue profiles in subsoils were similar to surface soils, likely reflecting temporal-use patterns. Accumulation factors (AFs) for vegetation and subsoils decreased with increasing CF2, 6-13 for vegetation and 8-13 in subsoils. In vegetation, for PFCAs having CF2 = 3-6, AFs diminished with increasing CF2 as a more sensitive function than for longer chains. Considering that PFAS manufacturing has transitioned from long-chain chemistry to short-chain, this elevated vegetative accumulation of short-chain PFAS suggests the potential for unanticipated PFAS exposure levels globally in human and/or wildlife populations. This inverse relationship between AFs and CF2-count in terrestrial vegetation is opposite the positive relationship reported in aquatic vegetation suggesting aquatic food webs may be preferentially enriched in long-chain PFAS. AFs normalized to soil-water concentrations increased with chain length for CF2 = 6-13 in vegetation but remained inversely related to chain length for CF2 = 3-6, reflecting a fundamental change in vegetation affinity for short chains compared to long.

Transport behavior difference and transport model of long- and short-chain per- and polyfluoroalkyl substances in underground environmental media: A review

Perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkyl sulfonates (PFSAs), which are the most commonly regulated and most widely concerned per- and polyfluoroalkyl substances (PFAS) have received increasing attention on a global scale due to their amphiphilicity, stability, and long-range transport. Thus, understanding the typical PFAS transport behavior and using models to predict the evolution of PFAS contamination plumes is important for evaluating the potential risks. In this study, the effects of organic matter (OM), minerals, water saturation, and solution chemistry on the transport and retention of PFAS were investigated, and the interaction mechanism between long-chain/short-chain PFAS and the surrounding environment was analyzed. The results revealed that high content of OM/minerals, low saturation, low pH, and divalent cation had a great retardation effect on long-chain PFAS transport. The retention caused by hydrophobic interaction was the prominent mechanism for long-chain PFAS, whereas, the retention caused by electrostatic interaction was more relevant for short-chain PFAS. Additional adsorption at the air-water and nonaqueous-phase liquids (NAPL)-water interface was another potential interaction for retarding PFAS transport in the unsaturated media, which preferred to retard long-chain PFAS. Furthermore, the developing models for describing PFAS transport were investigated and summarized in detail, including the convection-dispersion equation, two-site model (TSM), continuous-distribution multi-rate model, modified-TSM, multi-process mass-transfer (MPMT) model, MPMT-1D model, MPMT-3D model, tempered one-sided stable density transport model, and a comprehensive compartment model. The research revealed PFAS transport mechanisms and provided the model tools, which supported the theoretical basis for the practical prediction of the evolution of PFAS contamination plumes.

The addition of iron-carbon enhances the removal of perfluoroalkyl acids (PFAAs) in constructed wetlands

Hazardous perfluoroalkyl acids (PFAAs), particularly perfluorooctane sulfonate (PFOS) and perfluorooctanoate (PFOA), have become ubiquitous environmental persistent organic contaminants, posing serious threats to environmental health, which has led to the development of PFAA treatment methods. Wetland construction in combination with iron-carbon (CW-I), a low-maintenance and high-efficiency technology, may be capable of removing PFAAs through physico-biochemical processes. In this study, we aim to investigate the removal efficiency of PFAAs by CW-I as well as the critical functions of all components within the wetlands. Pairwise comparisons of iron-carbon and control groups revealed that iron-carbon significantly enhanced 15.9% for PFOA and 17.9% for PFOS absorption through phytouptake and substrate adsorption, with respective removal efficiencies of 71.8% ± 1.03% and 85.8% ± 1.56%. The generated iron ions stimulated plant growth and further enhanced phytouptake of PFAAs, with PFAAs accumulated primarily in root tissues with limited translocation. Observations of batch adsorption suggest that chemical and electrostatic interactions are involved in the iron-carbon adsorption process, with film and intraparticle diffusions being the rate-limiting events. Fourier transform infrared spectrometer and X-ray photoelectron spectroscopy revealed that PFAA adsorption by substrates occurs at the molecular level, as well as the occurrence of hydrophobic force effects and ligand exchanges during the iron-carbon adsorption process. Additionally, iron-carbon significantly altered the genera, phyla, and community structure of microorganisms, and some microorganisms and their extracellular polymers may possess ability to bind PFAAs. The information provided in this study contributes to our understanding of the PFAA removal processes in CW-I and enriched the classical cases of PFAA removal by CWs.

Immobilization of per- and polyfluoroalkyl substances (PFAS): Comparison of leaching behavior by three different leaching tests

The evaluation of PFAS immobilization performance in laboratory experiments, especially the long-term stability, is a challenge. To contribute to the development of adequate experimental procedures, the impact of experimental conditions on the leaching behavior was studied. Three experiments on different scales were compared: batch, saturated column, and variably saturated laboratory lysimeter experiments. The Infinite Sink (IS) test - a batch test with repeated sampling - was applied for PFAS for the first time. Soil from an agricultural field amended with paper-fiber biosolids polluted with various perfluoroalkyl acids (PFAAs; 655 μg/kg ∑¹⁸PFAAs) and polyfluorinated precursors (1.4 mg/kg ∑¹⁸precursors) was used as the primary material (N-1). Two types of PFAS immobilization agents were tested: treatment with activated carbon-based additives (soil mixtures: R-1 and R-2), and solidification with cement and bentonite (R-3). In all experiments, a chain-length dependent immobilization efficacy is observed. In R-3, the leaching of short-chain PFAAs was enhanced relative to N-1. In column and lysimeter experiments with R-1 and R-2, delayed breakthrough of short-chain PFAAs (C4) occurred (> 90 days; in column experiments at liquid-to-solid ratio (LS) > 30 L/kg) with similar temporal leaching rates suggesting that leaching in these cases was a kinetically controlled process. Observed differences between column and lysimeter experiments may be attributed to varying saturation conditions. In IS experiments, PFAS desorption from N-1, R-1, and R-2 is higher than in the column experiments (N-1: +44 %; R-1: +280 %; R-2: +162 %), desorption of short-chain PFAS occurred predominantly in the initial phase (< 14 days). Our findings demonstrate that sufficient operating times are essential in percolation experiments, e.g., in column experiments >100 days and LS > 30 L/kg. IS experiments may provide a faster estimate for nonpermanent immobilization. The comparison of experimental data from various experiments is beneficial to evaluate PFAS immobilization and to interpret leaching characteristics.

Physical and chemical properties of carbon-based sorbents that affect the removal of per- and polyfluoroalkyl substances from solution and soil

Removal of per- and polyfluoroalkyl substances (PFASs) from water or their immobilization in soil using carbon-based sorbents is one of the cost-effective techniques. Considering the variety of carbon-based sorbents, identifying the key sorbent properties responsible for PFASs removal from solution or immobilization in the soil can assist in the selection of the best sorbents for management of contaminated sites. This study evaluated the performance of 28 carbon-based sorbents including granular and powdered activated carbon (GAC and PAC), mixed mode carbon mineral material, biochars, and graphene-based materials (GNBs). The sorbents were characterized for a range of physical and chemical properties. PFASs' sorption from an AFFF-spiked solution was examined via a batch experiment, while their ability to immobilize PFASs in soil was tested following mixing, incubation and extraction using the Australian Standard Leaching Procedure. Both soil and solution were treated with 1 % w/w sorbents. Comparing different carbon-based materials, PAC, mixed mode carbon mineral material and GAC were the most effective in sorbing PFASs in both solution and soil. Among the different physical characteristics measured, the sorption of long-chain and more hydrophobic PFASs in both soil and solution was best correlated with sorbent surface area measured using methylene blue, which highlights the importance of mesopores in PFASs sorption. Iodine number was found to be a better indicator of the sorption of short-chain and more hydrophilic PFASs from solution but was found to be poorly correlated with PFASs immobilization in soil for activated carbons. Sorbents with a net positive charge performed better than those with a net negative charge, or no net charge. This study showed that surface area measured by methylene blue and surface charge are the best indicators of sorbent performance with respect to sorption/reducing leaching of PFASs. These properties may be helpful in selecting sorbents for PFASs remediation of soils/waters.

Emerging poly- and perfluoroalkyl substances in water and sediment from Qiantang River-Hangzhou Bay

Many emerging poly- and perfluoroalkyl substances (PFASs) are being used in China, due to the gradual phase out of legacy PFASs. Occurrence and environmental behaviors of emerging PFASs in Chinese fresh water environment are still not well known. In this study, 31 PFASs, including 14 emerging PFASs, were measured in 29 pairs of water and sediment samples from Qiantang River-Hangzhou Bay, an important drinking water resource for cities in Yangtze River basin. Perfluorooctanoate was consistently the predominant legacy PFAS in water (8.8-130 ng/L) and sediment (3.7-49 ng/g dw). Twelve emerging PFASs were detected in water, with the dominance of 6:2 chlorinated polyfluoroalkyl ether sulfonates (6:2 Cl-PFAES; mean 11 ng/L, 0.79-57 ng/L) and 6:2 fluorotelomer sulfonate (6:2 FTS; 5.6 ng/L, < LOD-29 ng/L). Eleven emerging PFASs were found in sediment, and were also dominated by 6:2 Cl-PFAES (mean 4.3 ng/g dw, 0.19-16 ng/g dw) and 6:2 FTS (2.6 ng/g dw, < LOD-9.4 ng/g dw). Spatially, sampling sites closed to the surrounding cities had comparatively higher water concentrations of PFASs. Among emerging PFASs, 8:2 Cl-PFAES (3.0 ± 0.34) had the highest mean field-based log-transformed organic‑carbon normalized sediment-water partition coefficient (log K_oc), followed by 6:2 Cl-PFAES (2.9 ± 0.35) and hexafluoropropylene oxide trimer acid (2.8 ± 0.32). p-perfluorous nonenoxybenzene sulfonate (2.3 ± 0.60) and 6:2 FTS (1.9 ± 0.54) had relatively lower mean log K_oc values. To our knowledge, this is the most comprehensive study investigating the occurrence and partitioning behaviors of emerging PFASs in Qiantang River.

Centurial Persistence of Forever Chemicals at Military Fire Training Sites

Drinking water contamination by per- and polyfluoroalkyl substances (PFAS) is widespread near more than 300 United States (U.S.) military bases that used aqueous film-forming foams (AFFF) for fire training and firefighting activities. Much of the PFAS at these sites consist of precursors that can transform into terminal compounds of known health concern but are omitted from standard analytical methods. Here, we estimate the expected duration and contribution of precursor biotransformation to groundwater PFAS contamination at an AFFF-contaminated military base on Cape Cod, Massachusetts, United States, by optimizing a geochemical box model using measured PFAS concentrations from a multidecadal time series of groundwater and a soil survey in the source zone. A toolbox of analytical techniques used to reconstruct the mass budget of PFAS showed that precursors accounted for 46 ± 8% of the extractable organofluorine (a proxy for total PFAS) across years. Terminal PFAS still exceed regulatory limits by 2000-fold decades after AFFF use ceased. Measurements and numerical modeling show that sulfonamido precursors are retained in the vadose zone and their slow biotransformation into perfluoroalkyl sulfonates (half-life > 66 yr) sustains groundwater concentrations of perfluorobutane sulfonate (PFBS) and perfluorohexane sulfonate (PFHxS). The estimated PFAS reservoir in the vadose zone and modeled flux into groundwater suggest PFAS contamination above regulatory guidelines will persist for centuries without remediation.

Quantification of the variability and penetration of per- and poly-fluoroalkyl substances through a concrete pad

Historical use of aqueous film forming foams (AFFF) containing per- and poly-fluoroalkyl substances (PFAS) for fire-fighting activities has contributed to widespread contamination of infrastructure which can represent an ongoing source of PFAS to the surrounding environment. A concrete fire training pad with historical use of Ansulite and Lightwater AFFF formulations had PFAS concentrations measured to quantify spatial variability of PFAS within the pad. Surface chips and whole cores of concrete through to the underlying aggregate base were collected over the 24 × 9 m concrete pad and depth profiles of PFAS concentrations in nine cores were analysed. PFOS and PFHxS dominated the PFAS for surface samples, along the depth profile of cores and in the underlying plastic and aggregate material, with substantial variability in the concentrations of PFAS in the samples. Although there was variability of individual PFAS along the depth profile, higher surface concentrations of PFAS generally followed the designed movement of water across the pad. Total oxidisable precursor (TOP) assessments of one core indicated additional PFAS were present along the entire length of the core. This study highlights concentrations of PFAS (up to low μg/kg) from historical use of AFFF can occur throughout concrete, with the variable concentrations throughout the profile.

Adsorption behavior of long-chain perfluoroalkyl substances on hydrophobic surface: A combined molecular characterization and simulation study

Hydrophobic interaction is a prevalent sorption mechanism of poly- and perfluoroalkyl substances (PFAS) in natural and engineered environments. In this study, we combined quartz crystal microbalance with dissipation (QCM-D), atomic force microscope (AFM) with force mapping, and molecular dynamics (MD) simulation to probe the molecular behavior of PFAS at the hydrophobic interface. On a CH₃-terminated self-assembled monolayer (SAM), perfluorononanoic acid (PFNA) showed ∼2-fold higher adsorption than perfluorooctane sulfonate (PFOS) that has the same fluorocarbon tail length but a different head group. Kinetic modeling using the linearized Avrami model suggests that the PFNA/PFOS-surface interaction mechanisms can evolve over time. This is confirmed by AFM force-distance measurements, which shows that while the adsorbed PFNA/PFOS molecules mostly lay flat, a portion of them formed aggregates/hierarchical structures of 1-10 nm in size after lateral diffusion on surface. PFOS showed a higher affinity to aggregate than PFNA. Association with air nanobubbles is observed for PFOS but not PFNA. MD simulations further showed that PFNA has a greater tendency than PFOS to have its tail inserted into the hydrophobic SAM, which can enhance adsorption but limit lateral diffusion, consistent with the relative behavior of PFNA/PFOS in QCM and AFM experiments. This integrative QCM-AFM-MD study reveals that the interfacial behavior of PFAS molecules can be heterogeneous even on a relatively homogeneous surface.

A review of the occurrence, transformation, and removal technologies for the remediation of per- and polyfluoroalkyl substances (PFAS) from landfill leachate

Per- and polyfluoroalkyl substances (PFAS) are persistent organic pollutants (POPs) that pose significant environmental and human health risks. The presence of PFAS in landfill leachate is becoming an increasingly concerning issue. This article presents a comprehensive review of current knowledge and research gaps in monitoring and removing PFAS from landfill leachate. The focus is on evaluating the effectiveness and sustainability of existing removal technologies, and identifying areas where further research is needed. To achieve this goal, the paper examines the existing technologies for monitoring and treating PFAS in landfill leachate. The review emphasizes the importance of sample preparation techniques and quality assurance/quality control measures in ensuring accurate and reliable results. Then, this paper reviewed the existing technologies for removal and remediation of PFAS in landfill leachates, such as adsorption, membrane filtration, photocatalytic oxidation, electrocatalysis, biodegradation, and constructed wetlands. Additionally, the paper summarizes the factors that exhibit the performance of various treatment technologies: reaction time, experimental conditions, and removal rates. Furthermore, the paper evaluates the potential application of different remediation technologies (i.e., adsorption, membrane filtration, photocatalytic oxidation, electrocatalysis, biodegradation, and constructed wetlands, etc.) in treating landfill leachate containing PFAS and its precursors, such as fluorotelomeres like FTOH and FTSs. The review highlights the importance of considering economic, technical, and environmental factors when selecting control measures. Overall, this article aims to provide guidance for promoting environmental protection and sustainable development in the context of PFAS contamination in landfill leachate.

In Situ Insight into the Availability and Desorption Kinetics of Per- and Polyfluoroalkyl Substances in Soils with Diffusive Gradients in Thin Films

The physicochemical exchange dynamics between the solid and solution phases of per- and polyfluoroalkyl substances (PFAS) in soils needs to be better understood. This study employed an in situ tool, diffusive gradients in thin films (DGT), to understand the distribution and exchange kinetics of five typical PFAS in four soils. Results show a nonlinear relationship between the PFAS masses in DGT and time, implying that PFAS were partially supplied by the solid phase in all of the soils. A dynamic model DGT-induced fluxes in soils/sediments (DIFS) was used to interpret the results and derive the distribution coefficients for the labile fraction (K_dl), response time (t_c), and adsorption/desorption rates (k₁ and k_-1). The larger labile pool size (indicated by K_dl) for the longer chain PFAS implies their higher potential availability. The shorter chain PFAS tend to have a larger t_c and relatively smaller k_-1, implying that the release of these PFAS in soils might be kinetically limited but not for more hydrophobic compounds, such as perfluorooctanesulfonic acid (PFOS), although soil properties might play an important role. K_dl ultimately controls the PFAS availability in soils, while the PFAS release from soils might be kinetically constrained (which may also hold for biota uptake), particularly for more hydrophilic PFAS.

High Persistence of Novel Polyfluoroalkyl Betaines in Aerobic Soils

Some contemporary aqueous film-forming foams (AFFFs) contain n:3 and n:1:2 fluorotelomer betaines (FTBs), which are often detected at sites impacted by AFFFs. As new chemical replacements, little is known about their environmental fate. For the first time, we investigated the biotransformation potential of 5:3 and 5:1:2 FTBs and a commercial AFFF that mainly contains n:3 and n:1:2 FTBs (n = 5, 7, 9, 11, and 13). Although some polyfluoroalkyl compounds are precursors to perfluoroalkyl acids, 5:3 and 5:1:2 FTBs exhibited high persistence, with no significant changes even after 120 days of incubation. While the degradation of 5:3 FTB into suspected products such as fluorotelomer acids or perfluoroalkyl carboxylic acids (PFCAs) could not be conclusively confirmed, we did identify a potential biotransformation product, 5:3 fluorotelomer methylamine. Similarly, 5:1:2 FTB did not break down or produce short-chain hydrogen-substituted polyfluoroalkyl acids (n:2 H-FTCA), hydrogen-substituted PFCA (2H-PFCA), or any other products. Incubating the AFFF in four soils with differing properties and microbial communities resulted in 0.023-0.25 mol % PFCAs by day 120. Most of the products are believed to be derived from n:2 fluorotelomers, minor components of the AFFF. Therefore, the findings of the study cannot be fully explained by the current understanding of structure-biodegradability relationships.

Comprehensive target analysis and TOP assay of per- and polyfluoroalkyl substances (PFAS) in wild boar livers indicate contamination hot-spots in the environment

The suitability of wild boar liver as a bioindicator of per- and polyfluoroalkyl substances (PFAS) in the terrestrial environment was investigated. Samples from 50 animals in three different areas associated with (1) contaminated paper sludges distributed on arable land (PS), (2) industrial emissions of PFAS (IE) and (3) background contamination (BC) were analyzed for 66 PFAS, including legacy PFAS, novel substitutes and precursors of perfluoroalkyl acids (PFAAs). Additionally, the Total Oxidizable Precursor (TOP) assay was performed to determine the formation potential of PFAAs from precursors. In total, 31 PFAS were detected with site-specific contamination profiles. PFAS concentrations in livers from area PS and IE (567 and 944 μg kg^-1 wet weight, respectively) were multiple times higher than from area BC (120 μg kg^-1). The dominating PFAS were the legacy compounds perfluorooctane sulfonic acid (PFOS) in areas PS and BC (426 and 82 μg kg^-1, respectively) and perfluorooctanoic acid (PFOA) in area IE (650 μg kg^-1). In area IE, the compounds 4,8-dioxa-3H-perfluorononanoic acid (DONA) and hexafluoropropylene oxide dimer acid (HFPO-DA) - which are used as substitutes for PFOA - were determined at 15 and 0.29 μg kg^-1, respectively. The formation potential of PFAAs was highest in area PS, but generally lower than the contamination with PFAAs. The pattern of perfluoroalkyl carboxylic acids (PFCAs) in wild boar liver reflects the contamination of the local soil at the two hot-spot areas IE and PS. This first comparison of PFAS contamination between wild boars and soil suggests that wild boar livers are suitable bioindicators for PFAS contamination in the terrestrial environment. Moreover, in terrestrial samples from area IE, legacy PFAS were found to be retained for a longer period as compared to riverine samples (suspended particulate matter and chub filet).

Stabilisation of PFAS in soils: Long-term effectiveness of carbon-based soil amendments

Immobilisation/stabilisation is one of the most developed and studied approaches for treating soils contaminated with per- and poly-fluoroalkyl substances (PFAS). However, its application has been inhibited by insufficient understanding of the effectiveness of added soil sorbents over time. Herein, we present results on the effectiveness of select carbon-based sorbents, over 4 years (longevity) and multiple laboratory leaching conditions (durability). Standard batch leaching tests simulating aggressive, worst-case scenario conditions for leaching (i.e., shaking for 24-48 h at high liquid/solid ratios) were employed to test longevity and durability of stabilisation in clay-loam and sandy-loam soils historically contaminated with PFAS (2 and 14 mg/kg ∑₂₈ PFAS). The different sorbents, which were applied at 1-6% (w/w), reduced leaching of PFAS from the soils to varying degrees. Among the 5 sorbents tested, initial assessments completed 1 week after treatment revealed that 2 powdered activated carbon (PAC) sorbents and 1 biochar were able to reduce leaching of PFAS in the soil by at least 95%. Four years after treatment, the performance of the PAC sorbents did not significantly change, whilst colloidal AC improved and was able to reduce leaching of PFAS by at least 94%. The AC-treated soils also appeared to be durable and achieved at least 95% reduction in PFAS leaching under repetitive leaching events (5 times extraction) and with minimal effect of pH (pH 4-10.5). In contrast, the biochars were affected by aging and were at least 22% less effective in reducing PFAS leaching across a range of leaching conditions. Sorbent performance was generally consistent with the sorbent's physical and chemical characteristics. Overall, the AC sorbents used in this study appeared to be better than the biochars in stabilising PFAS in the long term.

High-resolution temporal wastewater treatment plant investigation to understand influent mass flux of per- and polyfluoroalkyl substances (PFAS)

This study aims to identify sources of per- and polyfluoroalkyl substances (PFAS) to wastewater treatment plants (WWTPs) and reveals previously undescribed variability in daily PFAS concentrations by measuring their occurrence in WWTP influent each hour over the course of a week. ∑₅₀PFAS concentrations ranged between 89 ± 38 on Monday and 173 ± 110 ng L^-1 on Friday, where perfluoroalkyl carboxylic acids (PFCAs), disubstituted phosphate esters (diPAPs), and perfluoroalkyl sulfonic acids (PFSAs) contributed the largest proportion to overall weekly concentrations 37%, 30%, and 17% respectively. Simultaneous pulse events of perfluorooctanesulfonic acid (PFOS; 400 ng L^-1) and perfluoroheptanesulfonic acid (PFHpS; 18 ng L^-1) indicate significant industrial or commercial waste discharge that persists for up to 3 h. The minimum number of hourly grab samples required to detect variation of PFOS and PFHpS concentrations are 7 and 9 samples respectively, indicating a high degree of variability in PFAS concentrations between days. Overall, the risk of sampling bias from grab samples is high given the variability in PFAS concentrations and more frequent sampling campaigns must be balanced against the cost of analysis carefully to avoid the mischaracterisation of mass flux to receiving surface waters.

Role of Mineral-Organic Interactions in PFAS Retention by AFFF-Impacted Soil

A comprehensive, generalized approach to predict the retention of per- and polyfluoroalkyl substances (PFAS) from aqueous film-forming foam (AFFF) by a soil matrix as a function of PFAS molecular and soil physiochemical properties was developed. An AFFF with 34 major PFAS (12 anions and 22 zwitterions) was added to uncontaminated soil in one-dimensional saturated column experiments and PFAS mass retained was measured. PFAS mass retention was described using an exhaustive statistical approach to generate a poly-parameter quantitative structure-property relationship (ppQSPR). The relevant predictive properties were PFAS molar mass, mass fluorine, number of nitrogens in the PFAS molecule, poorly crystalline Fe oxides, organic carbon, and specific (BET-N2) surface area. The retention of anionic PFAS was nearly independent of soil properties and largely a function of molecular hydrophobicity, with the size of the fluorinated side chain as the main predictor. Retention of nitrogen-containing zwitterionic PFAS was related to poorly crystalline metal oxides and organic carbon content. Knowledge of the extent to which a suite of PFAS may respond to variations in soil matrix properties, as developed here, paves the way for the development of reactive transport algorithms with the ability to capture PFAS dynamics in source zones over extended time frames.

Nitrogen addition enhanced Per-fluoroalkyl substances' microbial availability in a wheat soil ecosystem

Per-fluoroalkyl substances (PFASs) have been widely detected in farmland soils and are understood to pose toxicological threats to soil microbiomes and crop safety. Meanwhile, farmland ecosystems have experienced increasing nitrogen loading caused by soil fertilization. Yet it is still unclear how nitrogen additions affect soil's microbial responses to PFASs. In this study, using a laboratory-based ecological experiment, we assessed the microbial availability of PFASs in soils receiving ammonium, nitrate, and urea nitrogen amendments by quantifying the translocation factors of PFASs from soil particle to soil extracellular polymeric substances (EPS). Our results showed that nitrogen, specifically ammonium, significantly increased the PFASs' microbial availability (p < 0.05). Second, nitrogen fertilization in PFASs-polluted soils decreased the microbial community diversity and stability at the structural, species, and functional levels (p < 0.05). For soil microbial activities, nitrogen enhanced the activity of superoxide dismutase (SOD) while it inhibited the catalase (CAT) and peroxidase (POD) (p < 0.01). Congruently, PFASs, as well as the nitrate and nitrite nitrogen, were shown to be the predominant abiotic drivers regulating the soil fungal succession (p < 0.05), while bacteria were mostly regulated by dissolved organic carbon (DOC) (p < 0.01). Furthermore, we revealed that the nitrogen cycling gene hmp (dominates the transformation from NO to NO₃^-) was the hub gene integrating the microbially available PFASs and the soil nitrogen cycling processes (p < 0.01), indicating that hmp could be the core regulator affecting the accumulation of PFASs in soil EPS. Our study highlighted that decreasing ammonia's amendments could mitigate China's national initiatives to reduce nitrogen fertilization in farmlands, reduce the PFASs' availability to the soil microbiome, and protect the microbial community stability in soil.