Differential gene expression in Daphnia magna suggests distinct modes of action and bioavailability for ZnO nanoparticles and Zn ions

Molecular toxicity identification evaluation (mTIE) approach predicts chemical exposure in Daphnia magna

Daphnia magna is a bioindicator organism accepted by several international water quality regulatory agencies. Current approaches for assessment of water quality rely on acute and chronic toxicity that provide no insight into the cause of toxicity. Recently, molecular approaches, such as genome wide gene expression responses, are enabling an alternative mechanism based approach to toxicity assessment. While these genomic methods are providing important mechanistic insight into toxicity, statistically robust prediction systems that allow the identification of chemical contaminants from the molecular response to exposure are needed. Here we apply advanced machine learning approaches to develop predictive models of contaminant exposure using a D. magna gene expression data set for 36 chemical exposures. We demonstrate here that we can discriminate between chemicals belonging to different chemical classes including endocrine disruptors and inorganic and organic chemicals based on gene expression. We also show that predictive models based on indices of whole pathway transcriptional activity can achieve comparable results while facilitating biological interpretability.

Toxicity of oxidatively degraded quantum dots to developing zebrafish (Danio rerio)

Once released into the environment, engineered nanoparticles (eNPs) are subjected to processes that may alter their physical or chemical properties, potentially altering their toxicity vis-à-vis the as-synthesized materials. We examined the toxicity to zebrafish ( Danio rerio ) embryos of CdSecore/ZnSshell quantum dots (QDs) before and after exposure to an in vitro chemical model designed to simulate oxidative weathering in soil environments based on a reductant-driven Fenton's reaction. Exposure to these oxidative conditions resulted in severe degradation of the QDs: the Zn shell eroded, Cd(2+) and selenium were released, and amorphous Se-containing aggregates were formed. Products of QD weathering exhibited higher potency than did as-synthesized QDs. Morphological endpoints of toxicity included pericardial, ocular and yolk sac edema, nondepleted yolk, spinal curvature, tail malformations, and craniofacial malformations. To better understand the selenium-like toxicity observed in QD exposures, we examined the toxicity of selenite, selenate, and amorphous selenium nanoparticles (SeNPs). Selenite exposures resulted in high mortality to embryos/larvae while selenate and SeNPs were nontoxic. Co-exposures to SeNPs + CdCl2 resulted in dramatic increase in mortality and recapitulated the morphological endpoints of toxicity observed with exposure to products of QD weathering. Cadmium body burden was increased in larvae exposed to weathered QDs or SeNP + CdCl2 suggesting the increased potency of products of QD weathering was due to selenium modulation of cadmium toxicity. Our findings highlight the need to examine the toxicity of eNPs after they have undergone environmental weathering processes.

Toxicity and transcriptomic analysis in Hyalella azteca suggests increased exposure and susceptibility of epibenthic organisms to zinc oxide nanoparticles

Nanoparticles (NPs) are expected to make their way into the aquatic environment where sedimentation of particles will likely occur, putting benthic organisms at particular risk. Therefore, organisms such as Hyalella azteca, an epibenthic crustacean which forages at the sediment surface, is likely to have a high potential exposure. Here we show that zinc oxide (ZnO) NPs are more toxic to H. azteca compared with the corresponding metal ion, Zn(2+). Dissolution of ZnO NPs contributes about 50% of the Zn measured in the ZnO NP suspensions, and cannot account for the toxicity of these particles to H. azteca. However, gene expression analysis is unable to distinguish between the ZnO NP exposures and zinc sulfate (ZnSO4) exposures at equitoxic concentrations. These results lead us to hypothesize that ZnO NPs provide an enhanced exposure route for Zn(2+) uptake into H. azteca, and possibly other sediment dwelling organisms. Our study supports the prediction that sediment dwelling organisms are highly susceptible to the effects of ZnO NPs and should be considered in the risk assessment of these nanomaterials.

Analysis of the Elodea nuttallii transcriptome in response to mercury and cadmium pollution: development of sensitive tools for rapid ecotoxicological testing

Toxic metals polluting aquatic ecosystems are taken up by inhabitants and accumulate in the food web, affecting species at all trophic levels. It is therefore important to have good tools to assess the level of risk represented by toxic metals in the environment. Macrophytes are potential organisms for the identification of metal-responsive biomarkers but are still underrepresented in ecotoxicology. In the present study, we used next-generation sequencing to investigate the transcriptomic response of Elodea nuttallii exposed to enhanced concentrations of Hg and Cd. We de novo assembled more than 60 000 contigs, of which we found 170 to be regulated dose-dependently by Hg and 212 by Cd. Functional analysis showed that these genes were notably related to energy and metal homeostasis. Expression analysis using nCounter of a subset of genes showed that the gene expression pattern was able to assess toxic metal exposure in complex environmental samples and was more sensitive than other end points (e.g., bioaccumulation, photosynthesis, etc.). In conclusion, we demonstrate the feasibility of using gene expression signatures for the assessment of environmental contamination, using an organism without previous genetic information. This is of interest to ecotoxicology in a wider sense given the possibility to develop specific and sensitive bioassays.

Sorption, dissolution and pH determine the long-term equilibration and toxicity of coated and uncoated ZnO nanoparticles in soil

To assess the effect of long-term dissolution on bioavailability and toxicity, triethoxyoctylsilane coated and uncoated zinc oxide nanoparticles (ZnO-NP), non-nano ZnO and ZnCl2 were equilibrated in natural soil for up to twelve months. Zn concentrations in pore water increased with time for all ZnO forms but peaked at intermediate concentrations of ZnO-NP and non-nano ZnO, while for coated ZnO-NP such a clear peak only was seen after 12 months. Dose-related increases in soil pH may explain decreased soluble Zn levels due to fixation of Zn released from ZnO at higher soil concentrations. At T = 0 uncoated ZnO-NP and non-nano ZnO were equally toxic to the springtail Folsomia candida, but not as toxic as coated ZnO-NP, and ZnCl2 being most toxic. After three months equilibration toxicity to F. candida was already reduced for all Zn forms, except for coated ZnO-NP which showed reduced toxicity only after 12 months equilibration.

Toxicity of Ag, CuO and ZnO nanoparticles to selected environmentally relevant test organisms and mammalian cells in vitro: a critical review

Nanoparticles (NPs) of copper oxide (CuO), zinc oxide (ZnO) and especially nanosilver are intentionally used to fight the undesirable growth of bacteria, fungi and algae. Release of these NPs from consumer and household products into waste streams and further into the environment may, however, pose threat to the 'non-target' organisms, such as natural microbes and aquatic organisms. This review summarizes the recent research on (eco)toxicity of silver (Ag), CuO and ZnO NPs. Organism-wise it focuses on key test species used for the analysis of ecotoxicological hazard. For comparison, the toxic effects of studied NPs toward mammalian cells in vitro were addressed. Altogether 317 L(E)C50 or minimal inhibitory concentrations (MIC) values were obtained for algae, crustaceans, fish, bacteria, yeast, nematodes, protozoa and mammalian cell lines. As a rule, crustaceans, algae and fish proved most sensitive to the studied NPs. The median L(E)C50 values of Ag NPs, CuO NPs and ZnO NPs (mg/L) were 0.01, 2.1 and 2.3 for crustaceans; 0.36, 2.8 and 0.08 for algae; and 1.36, 100 and 3.0 for fish, respectively. Surprisingly, the NPs were less toxic to bacteria than to aquatic organisms: the median MIC values for bacteria were 7.1, 200 and 500 mg/L for Ag, CuO and ZnO NPs, respectively. In comparison, the respective median L(E)C50 values for mammalian cells were 11.3, 25 and 43 mg/L. Thus, the toxic range of all the three metal-containing NPs to target- and non-target organisms overlaps, indicating that the leaching of biocidal NPs from consumer products should be addressed.

Bioaccumulation and sub-acute toxicity of zinc oxide nanoparticles in juvenile carp (Cyprinus carpio): a comparative study with its bulk counterparts

In this study, bioaccumulation and sub-acute toxicity of water-borne nano-ZnO in the test fish, juvenvile carp (Cyprinus Carpio) were evaluated. To clarify the contribution of particle size and free Zn ion to NPs toxicity, its bulk counterparts (bulk-ZnO) and the released Zn(2+) were also tested. The results showed that after a 30-day exposure, 50mg/L of nano-ZnO and bulk-ZnO could be significantly accumulated and distributed in various tissues of fish, but nano-ZnO exhibited more hyper-bioaccumulation than bulk-ZnO. Liver and gill might be the target tissues with exposure to nano-ZnO, instead, the target tissue for bulk-ZnO might be intestine. Also, 50mg/L of nano-ZnO caused more severe histopathological changes than the same concentration of bulk-ZnO, which was in accordance with the induction of higher levels of intracellular oxidative stress. The effects of dissolved Zn ions were assessed and the ion toxicity was negligible herein. The results of this study indicated that the observed toxicities of nano-ZnO were not likely a result solely of particle dissolution and identified as a function of particle toxicity and the possibility for a size dependence. The main toxic mechanism of nano-ZnO was possibly by increasing cellular oxidative stress response.

Custom-designed nanomaterial libraries for testing metal oxide toxicity

Advances in aerosol technology over the past 10 years have enabled the generation and design of ultrafine nanoscale materials for many applications. A key new method is flame spray pyrolysis (FSP), which produces particles by pyrolyzing a precursor solution in the gas phase. FSP is a highly versatile technique for fast, single-step, scalable synthesis of nanoscale materials. New innovations in particle synthesis using FSP technology, including variations in precursor chemistry, have enabled flexible, dry synthesis of loosely agglomerated, highly crystalline ultrafine powders (porosity ≥ 90%) of binary, ternary, and mixed-binary-and-ternary oxides. FSP can fulfill much of the increasing demand, especially in biological applications, for particles with specific material composition, high purity, and high crystallinity. In this Account, we describe a strategy for creating nanoparticle libraries (pure or Fedoped ZnO or TiO₂) utilizing FSP and using these libraries to test hypotheses related to the particles' toxicity. Our innovation lies in the overall integration of the knowledge we have developed in the last 5 years in (1) synthesizing nanomaterials to address specific hypotheses, (2) demonstrating the electronic properties that cause the material toxicity, (3) understanding the reaction mechanisms causing the toxicity, and (4) extracting from in vitro testing and in vivo testing in terrestrial and marine organisms the essential properties of safe nanomaterials. On the basis of this acquired knowledge, we further describe how the dissolved metal ion from these materials (Zn²⁺ in this Account) can effectively bind with different cell constituents, causing toxicity. We use Fe-S protein clusters as an example of the complex chemical reactions taking place after free metal ions migrate into the cells. As a second example, TiO₂ is an active material in the UV range that exhibits photocatalytic behavior. The induction of electron-hole (e⁻/h⁺) pairs followed by free radical production is a key mechanism for biological injury. We show that decreasing the bandgap energy increases the phototoxicity in the presence of near-visible light. We present in detail the mechanism of electron transfer in biotic and abiotic systems during light exposure. Through this example we show that FSP is a versatile technique for efficiently designing a homologous library, meaning a library based on a parent oxide doped with different amounts of dopant, and investigating the properties of the resulting compounds. Finally, we describe the future outlook and state-of-the-art of an innovative two-flame system. A double-flame reactor enables independent control over each flame, the nozzle distances and the flame angles for efficient mixing of the particle streams. In addition, it allows for different flame compositions, flame sizes, and multicomponent mixing (a grain-grain heterojunction) during the reaction process.

Sulfidation mechanism for zinc oxide nanoparticles and the effect of sulfidation on their solubility

Environmental transformations of nanoparticles (NPs) affect their properties and toxicity potential. Sulfidation is an important transformation process affecting the fate of NPs containing metal cations with an affinity for sulfide. Here, the extent and mechanism of sulfidation of ZnO NPs were investigated, and the properties of resulting products were carefully characterized. Synchrotron X-ray absorption spectroscopy and X-ray diffraction analysis reveal that transformation of ZnO to ZnS occurs readily at ambient temperature in the presence of inorganic sulfide. The extent of sulfidation depends on sulfide concentration, and close to 100% conversion can be obtained in 5 days given sufficient addition of sulfide. X-ray diffraction and transmission electron microscopy showed formation of primarily ZnS NPs smaller than 5 nm, indicating that sulfidation of ZnO NPs occurs by a dissolution and reprecipitation mechanism. The solubility of partially sulfidized ZnO NPs is controlled by the remaining ZnO core and not quenched by a ZnS shell formed as was observed for partially sulfidized Ag NPs. Sulfidation also led to NP aggregation and a decrease of surface charge. These changes suggest that sulfidation of ZnO NPs alters the behavior, fate, and toxicity of ZnO NPs in the environment. The reactivity and fate of the resulting <5 nm ZnS particles remains to be determined.

Comparative evaluation of impact of Zn and ZnO nanoparticles on brine shrimp (Artemia salina) larvae: effects of particle size and solubility on toxicity

Brine shrimp (Artemia salina) larvae were exposed to different sizes of zinc (Zn) and zinc oxide (ZnO) nanoparticles (NPs) to evaluate their toxicity in marine aquatic ecosystems. Acute exposure was conducted in seawater with 10, 50 and 100 mg L(-1) concentrations of the NPs for 24 h and 96 h. Phase contrast microscope images confirmed the accumulation of the NPs inside the guts. Artemia were unable to eliminate the ingested particles, which was thought to be due to the formation of massive particles in the guts. Although the suspensions of the NPs did not exhibit any significant acute toxicity within 24 h, mortalities increased remarkably in 96 h and escalated with increasing concentration of NP suspension to 42% for Zn NPs (40-60 nm) (LC50∼ 100 mg L(-1)) and to about 34% for ZnO NPs (10-30 nm) (LC50 > 100 mg L(-1)). The suspensions of Zn NPs were more toxic to Artemia than those of ZnO NPs under comparable regimes. This effect was attributed to higher Zn(2+) levels (ca. up to 8.9 mg L(-1)) released to the medium from Zn NPs in comparison to that measured in the suspensions of ZnO NPs (ca. 5.5 mg L(-1)). In addition, the size of the nanopowders appeared to contribute to the observed toxicities. Although the suspensions possessed aggregates of comparable sizes, smaller Zn NPs (40-60 nm) were relatively more toxic than larger Zn NPs (80-100 nm). Likewise, the suspensions of 10-30 nm ZnO NPs caused higher toxicity than those of 200 nm ZnO NPs. Lipid peroxidation levels were substantially higher in 96 h (p < 0.05), indicating that the toxic effects were due to the oxidative stress.

The biophysicochemical interactions at the interfaces between nanoparticles and aquatic organisms: adsorption and internalization

Nano–bio interfacial interactions that can likely regulate the potential toxicity of nanoparticles (NPs) toward aquatic organisms are receiving increasing research interest worldwide and warrant more investigation. This review presents an overview of already-known nano–bio interactions and some speculations on the interfaces between NPs and aquatic organisms, in order to gain a new insight into the biological effects of NPs in the aquatic environment. The fundamental interfaces between NPs and organism cells and the main biophysicochemical interactions that occur at the nano–bio interfaces are described. The interfacial interactions, focused on adsorption and internalization, during the contact of NPs with microorganisms, hydrophytes, invertebrates and fish were reviewed. The effects of NP properties and suspending states as well as environmental conditions including pH, ionic strength, natural organic matter and other factors on the interfacial interactions were elucidated. Furthermore, the analytical methods employed in the interfacial interaction investigations were also briefly introduced. Future research directions of nano–bio interactions were prospected.

Ecotoxicity of manufactured ZnO nanoparticles--a review

This report presents an exhaustive literature review on the toxicity of manufactured ZnO nanoparticles (NPs) to ecological receptors across different taxa: bacteria, algae and plants, aquatic and terrestrial invertebrates and vertebrates. Ecotoxicity studies on ZnO NPs are most abundant in bacteria, and are relatively lacking in other species. These studies suggest relative high acute toxicity of ZnO NPs (in the low mg/l levels) to environmental species, although this toxicity is highly dependent on test species, physico-chemical properties of the material, and test methods. Particle dissolution to ionic zinc and particle-induced generation of reactive oxygen species (ROS) represent the primary modes of action for ZnO NP toxicity across all species tested, and photo-induced toxicity associated with its photocatalytic property may be another important mechanism of toxicity under environmentally relevant UV radiation. Finally, current knowledge gaps within this area are briefly discussed and recommendations for future research are made.

Genome-wide assessment in Escherichia coli reveals time-dependent nanotoxicity paradigms

The use of engineered nanomaterials (eNM) in consumer and industrial products is increasing exponentially. Our ability to rapidly assess their potential effects on human and environmental health is limited by our understanding of nanomediated toxicity. High-throughput screening (HTS) enables the investigation of nanomediated toxicity on a genome-wide level, thus uncovering their novel mechanisms and paradigms. Herein, we investigate the toxicity of zinc-containing nanomaterials (Zn-eNMs) using a time-resolved HTS methodology in an arrayed Escherichia coli genome-wide knockout (KO) library. The library was screened against nanoscale zerovalent zinc (nZn), nanoscale zinc oxide (nZnO), and zinc chloride (ZnCl(2)) salt as reference. Through sequential screening over 24 h, our method identified 173 sensitive clones from diverse biological pathways, which fell into two general groups: early and late responders. The overlap between these groups was small. Our results suggest that bacterial toxicity mechanisms change from pathways related to general metabolic function, transport, signaling, and metal ion homeostasis to membrane synthesis pathways over time. While all zinc sources shared pathways relating to membrane damage and metal ion homeostasis, Zn-eNMs and ZnCl(2) displayed differences in their sensitivity profiles. For example, ZnCl(2) and nZnO elicited unique responses in pathways related to two-component signaling and monosaccharide biosynthesis, respectively. Single isolated measurements, such as MIC or IC(50), are inadequate, and time-resolved approaches utilizing genome-wide assays are therefore needed to capture this crucial dimension and illuminate the dynamic interplay at the nano-bio interface.

Acute toxicity of Ag and CuO nanoparticle suspensions against Daphnia magna: the importance of their dissolved fraction varying with preparation methods

A variety of methods to prepare nanoparticle suspensions have been employed for aquatic toxicity tests, although they can influence the dispersion property and subsequent toxicity of nanoparticles. Thus, in this study, we prepared stock suspensions of silver (Ag) and copper oxide (CuO) nanoparticles using different methods and compared their acute toxicity against Daphnia magna. The results showed that the dispersion method, filtration and initial concentration largely affected their toxicity, when the toxicity was expressed as the total concentrations of Ag and Cu. In case of Ag nanoparticles, the toxicity was also influenced by their different particle size. However, negligible differences in 24h-median effect concentration (EC(50)) values, which were calculated in terms of their dissolved concentrations, were observed. When expressing toxicity on the basis of dissolved concentrations, 24h-EC(50) values of the Ag and CuO nanoparticles were also found to be similar to those of the counterpart ionic species, i.e., Ag (as AgNO(3)) and Cu (as CuCl(2)·2H(2)O). These findings indicate that the dissolved fraction of nanoparticles largely contributes to their acute toxicity. Our results may help in establishing a useful guideline for preparing nanoparticle suspensions with reproducible toxicity.

Biological reactivity of TiO2 nanoparticles assessed by ex vivo testing

Isolated digestive gland epithelium from a model invertebrate organism was used in an ex vivo system to assess the potential of nanoparticulate TiO(2) to disrupt cell membranes. Primary particle size, surface area, concentration of particles in a suspension, and duration of exposure to TiO(2) particles were all found to have effects, which are observed at concentrations of nano-TiO(2) as low as 1 μg mL(-1). The test system employed here can be used as a fast screening tool to assess biological potential of nanoparticles with similar chemical composition but different size, concentration, or duration of exposure. We discuss the potential of ex vivo tests to avoid some of the limitations of conventional in vitro tests.

Toxicogenomic responses of nanotoxicity in Daphnia magna exposed to silver nitrate and coated silver nanoparticles

Applications for silver nanomaterials in consumer products are rapidly expanding, creating an urgent need for toxicological examination of the exposure potential and ecological effects of silver nanoparticles (AgNPs). The integration of genomic techniques into environmental toxicology has presented new avenues to develop exposure biomarkers and investigate the mode of toxicity of novel chemicals. In the present study we used a 15k oligonucleotide microarray for Daphnia magna, a freshwater crustacean and common indicator species for toxicity, to differentiate between particle specific and ionic silver toxicity and to develop exposure biomarkers for citrate-coated and PVP-coated AgNPs. Gene expression profiles revealed that AgNO(3) and AgNPs have distinct expression profiles suggesting different modes of toxicity. Major biological processes disrupted by the AgNPs include protein metabolism and signal transduction. In contrast, AgNO(3) caused a downregulation of developmental processes, particularly in sensory development. Metal responsive and DNA damage repair genes were induced by the PVP AgNPs, but not the other treatments. In addition, two specific biomarkers were developed for the environmental detection of PVP AgNPs; although further verification under different environmental conditions is needed.

Functionalized nanoparticle interactions with polymeric membranes

A series of experiments was performed to measure the retention of a class of functionalized nanoparticles (NPs) on porous (microfiltration and ultrafiltration) membranes. The findings impact engineered water and wastewater treatment using membrane technology, characterization and analytical schemes for NP detection, and the use of NPs in waste treatment scenarios. The NPs studied were composed of silver, titanium dioxide, and gold; had organic coatings to yield either positive or negative surface charge; and were between 2 and 10nm in diameter. NP solutions were applied to polymeric membranes composed of different materials and pore sizes (ranging from ≈ 2 nm [3 kDa molecular weight cutoff] to 0.2 μm). Greater than 99% rejection was observed of positively charged NPs by negatively charged membranes even though pore diameters were up to 20 times the NP diameter; thus, sorption caused rejection. Negatively charged NPs were less well rejected, but behavior was dependent not only on surface functionality but on NP core material (Ag, TiO(2), or Au). NP rejection depended more upon NP properties than membrane properties; all of the negatively charged polymeric membranes behaved similarly. The NP-membrane interaction behavior fell into four categories, which are defined and described here.

Antibacterial activities of tellurium nanomaterials

We prepared four differently shaped Te nanomaterials (NMs) as antibacterial reagents against Escherichia coli. By controlling the concentrations of hydrazine (N(2)H(4)) as reducing agent, NaCl, and temperature, we prepared Te nanowires, nanopencils, nanorices, and nanocubes. These four Te NMs resulted in a live/dead ratio of E. coli cells of less than 0.1, which is smaller than that of Ag nanoparticles. The order of antibacterial activity against E. coli is nanocubes ≈ nanorices > nanopencils ≈ nanowires. This is in good agreement with the concentration order of tellurite (TeO(3)(2-)) ions released from Te NMs in E. coli cells, revealing that TeO(3)(2-) ions account for the antibacterial activity of the four Te NMs. We found that spherical Te nanoparticles (32 nm in diameter) with TeO(3)(2-) ions were formed in the E. coli cells. Compared to Ag nanoparticles that are commonly used as antibacterial reagents, Te NMs have higher antibacterial activity and lower toxicity. Thus, Te NMs hold great practical potential as a new and efficient antibacterial agent.

Effect of Cu-nanoparticles versus Cu-salt in Enchytraeus albidus (Oligochaeta): differential gene expression through microarray analysis

Despite increased utilization of copper (Cu) nanoparticles, their behaviour and effect in the environment is largely unknown. Enchytraeids are extensively used in studies of soil ecotoxicology. Ecotoxicogenomic tools have shown to be valuable in nanotoxicity interpretation. A cDNA microarray for Enchytraeus albidus has recently been developed, which was used in this study. We compared the gene expression profiles of E. albidus when exposed to Cu-salt (CuCl(2)) and Cu-nanoparticles (Cu-NP) spiked soil. Exposure time was 48 h with a concentration range of 400 to 1000 mg Cu/kg. There were more down-regulated than up-regulated genes. The number of differently expressed genes (DEG) decreased with increasing concentration for CuCl(2) exposure, whereas for Cu-NP, the number did not change. The number of common DEG decreased with increasing concentration. Differences were mainly related to transcripts involved in energy metabolism (e.g. monosaccharide transporting ATPase, NADH dehydrogenase subunit 1, cytochrome c). Overall, our results indicated that Cu-salt and Cu-NP exposure induced different gene responses. Indirect estimates of Cu-NP related ion-release indicated little or no free Cu(2+) activity in soil solutions. Hence, it was concluded that the Cu-NP effects were probably caused by the nanoparticles themselves and not by released ions.

Dissolution of ZnO nanoparticles at circumneutral pH: a study of size effects in the presence and absence of citric acid

Understanding size-dependent processes, including dissolution, of engineered nanoparticles is essential in addressing the potential environmental and health impacts of these materials as well as their long-term stability. In this study, experimental measurements of size-dependent dissolution of well-characterized zinc oxide (ZnO) nanoparticles with particle diameters in the range of 4 to 130 nm have been measured at circumneutral pH (pH 7.5) and compared. Dissolution was found to be enhanced with smaller ZnO nanoparticles compared to larger-sized particles, even though the nanoparticles were present in solution as aggregates with hydrodynamic diameters on the order of 1-3 μm in size. The presence of citric acid significantly enhanced the extent of ZnO dissolution for all sizes, and the greatest enhancement was observed for the 4 nm particles. Although these results are found to be in qualitative agreement with theoretical predictions, a linearized form of the Kelvin equation to calculate a surface free energy yielded quantities inconsistent with expected values from the literature. Reasons for this inconsistency are discussed and include potential deviations of solubility behavior from classical thermodynamics as a result of a lack of detailed knowledge of surface structure and surface properties, including the presence of different surface crystal facets, and the aggregation state.

Solubility of nano-zinc oxide in environmentally and biologically important matrices

Increasing manufacture and use of engineered nanoparticles is leading to a greater probability for release of engineered nanoparticles into the environment and exposure to organisms. In particular, zinc oxide (ZnO) is toxic, although it is unclear whether this toxicity is due to the zinc oxide nanoparticles, dissolution to Zn(2+) , or some combination thereof. The goal of this study was to determine the relative solubilities of both commercially available and in-house synthesized ZnO in matrices used for environmental fate and transport or biological toxicity studies. Dissolution of ZnO was observed in nanopure water (7.18-7.40 mg/L dissolved Zn, as measured by filtration) and Roswell Park Memorial Institute medium (RPMI-1640) (∼5 mg/L), but much more dissolution was observed in Dulbecco's modified Eagle's medium, in which the dissolved Zn concentration exceeded 34 mg/L. Moderately hard water exhibited low Zn solubility, likely because of precipitation of a Zn carbonate solid phase. Precipitation of a Zn-containing solid phase in RPMI also appeared to limit Zn solubility. Equilibrium conditions with respect to ZnO solubility were not apparent in these matrices, even after more than 1,000 h of dissolution. These results suggest that solution chemistry exerts a strong influence on ZnO dissolution and can result in limits on Zn solubility from precipitation of less soluble solid phases.

Chronic toxicity of ZnO nanoparticles, non-nano ZnO and ZnCl2 to Folsomia candida (Collembola) in relation to bioavailability in soil

The chronic toxicity of zinc oxide nanoparticles (ZnO-NP) to Folsomia candida was determined in natural soil. To unravel the contribution of particle size and free zinc to NP toxicity, non-nano ZnO and ZnCl(2) were also tested. Zinc concentrations in pore water increased with increasing soil concentrations, with Freundlich sorption constants K(f) of 61.7, 106 and 96.4 l/kg (n = 1.50, 1.34 and 0.42) for ZnO-NP, non-nano ZnO and ZnCl(2) respectively. Survival of F. candida was not affected by ZnO-NP and non-nano ZnO at concentrations up to 6400 mg Zn/kg d.w. Reproduction was dose-dependently reduced with 28-d EC50s of 1964, 1591 and 298 mg Zn/kg d.w. for ZnO-NP, non-nano ZnO and ZnCl(2), respectively. The difference in EC50s based on measured pore water concentrations was small (7.94-16.8 mg Zn/l). We conclude that zinc ions released from NP determine the observed toxic effects rather than ZnO particle size.

Toward toxicity testing of nanomaterials in the 21st century: a paradigm for moving forward

A challenge-facing hazard identification and safety evaluation of engineered nanomaterials being introduced to market is the diversity and complexity of the types of materials with varying physicochemical properties, many of which can affect their toxicity by different mechanisms. In general, in vitro test systems have limited usefulness for hazard identification of nanoparticles due to various issues. Meanwhile, conducting chronic toxicity/carcinogenicity studies in rodents for every new nanomaterial introduced into the commerce is impractical if not impossible. New toxicity testing systems which rely on predictive, high-throughput technologies may be the ultimate goal of evaluating the potential hazard of nanomaterials. However, at present, this approach alone is unlikely to succeed in evaluating the toxicity of the wide array of nanomaterials and requires validation from in vivo studies. This article proposes a paradigm for toxicity testing and elucidation of the molecular mechanisms of reference materials for specific nanomaterial classes/subclasses using short-term in vivo animal studies in conjunction with high-throughput screenings and mechanism-based short-term in vitro assays. The hazard potential of a particular nanomaterial can be evaluated by conducting only in vitro high-throughput assays and mechanistic studies and comparing the data with those of the reference materials in the specific class/subclass-an approach in line with the vision for 'Toxicity Testing in the 21st Century' of chemicals. With well-designed experiments, testing nanomaterials of varying/selected physicochemical parameters may be able to identify the physicochemical parameters contributing to toxicity. The data so derived could be used for the development of computer model systems to predict the hazard potential of specific nanoparticles based on property-activity relationships.

Aerosolized ZnO nanoparticles induce toxicity in alveolar type II epithelial cells at the air-liquid interface

The majority of in vitro studies characterizing the impact of engineered nanoparticles (NPs) on cells that line the respiratory tract were conducted in cells exposed to NPs in suspension. This approach introduces processes that are unlikely to occur during inhaled NP exposures in vivo, such as the shedding of toxic doses of dissolved ions. ZnO NPs are used extensively and pose significant sources for human exposure. Exposures to airborne ZnO NPs can induce adverse effects, but the relevance of the dissolved Zn(2+) to the observed effects in vivo is still unclear. Our goal was to mimic in vivo exposures to airborne NPs and decipher the contribution of the intact NP from the contribution of the dissolved ions to airborne ZnO NP toxicity. We established the exposure of alveolar type II epithelial cells to aerosolized NPs at the air-liquid interface (ALI) and compared the impact of aerosolized ZnO NPs and NPs in suspension at the same cellular doses, measured as the number of particles per cell. By evaluating membrane integrity and cell viability 6 and 24 h post-exposure, we found that aerosolized NPs induced toxicity at the ALI at doses that were in the same order of magnitude as doses required to induce toxicity in submersed cultures. In addition, distinct patterns of oxidative stress were observed in the two exposure systems. These observations unravel the ability of airborne ZnO NPs to induce toxicity without the contribution of dissolved Zn(2+) and suggest distinct mechanisms at the ALI and in submersed cultures.

An integrated multi-disciplinary approach for studying multiple stressors in freshwater ecosystems: Daphnia as a model organism

The increased overexploitation of freshwater ecosystems and their extended watersheds often generates a cascade of anthropogenic stressors (e.g., acidification, eutrophication, metal contamination, Ca decline, changes in the physical environment, introduction of invasive species, over-harvesting of resources). The combined effect of these stressors is particularly difficult to study, requiring a coordinated multi-disciplinary effort and insights from various sub-disciplines of biology, including ecology, evolution, toxicology, and genetics. It also would benefit from a well-developed and broadly accepted model systems. The freshwater crustacean Daphnia is an excellent model organism for studying multiple stressors because it has been a chosen focus of study in all four of these fields. Daphnia is a widespread keystone species in most freshwater ecosystems, where it is routinely exposed to a multitude of anthropogenic and natural stressors. It has a fully sequenced genome, a well-understood life history and ecology, and a huge library of responses to toxicity. To make the case for its value as a model species, we consider the joint and separate effects of natural and three anthropogenic stressors-climatic change, calcium decline, and metal contaminants on daphniids. We propose that integrative approaches marrying various subfields of biology can advance our understanding of the combined effects of stressors. Such approaches can involve the measuring of multiple responses at several levels of biological organization from molecules to natural populations. For example, novel interdisciplinary approaches such as transcriptome profiling and mutation accumulation experiments can offer insights into how multiple stressors influence gene transcription and mutation rates across genomes, and, thus, help determine the causal mechanism between environmental stressors and population/community effects as well as long-term evolutionary patterns.