A simple millifluidic benchtop reactor system for the high-throughput synthesis and functionalization of gold nanoparticles with different sizes and shapes

Thermal Transport across Surfactant Layers on Gold Nanorods in Aqueous Solution

Ultrafast transient absorption experiments and molecular dynamics simulations are utilized to investigate the thermal transport between aqueous solutions and cetyltrimethylammonium bromide (CTAB)- or polyethylene glycol (PEG)-functionalized gold nanorods (GNRs). The transient absorption measurement data are interpreted with a multiscale heat diffusion model, which incorporates the interfacial thermal conductances predicted by molecular dynamics. According to our observations, the effective thermal conductance of the GNR/PEG/water system is higher than that of the GNR/CTAB/water system with a surfactant layer of the same length. We attribute the enhancement of thermal transport to the larger thermal conductance at the GNR/PEG interface as compared with that at the GNR/CTAB interface, in addition to the water penetration into the hydrophilic PEG layer. Our results highlight the role of the GNR/polymer thermal interfaces in designing biological and composite-based heat transfer applications of GNRs, and the importance of multiscale analysis in interpreting transient absorption data in systems consisting of low interfacial thermal conductances.

Shape-controlled continuous synthesis of metal nanostructures

A segmented flow-based microreactor is used for the continuous production of faceted nanocrystals. Flow segmentation is proposed as a versatile tool to manipulate the reduction kinetics and control the growth of faceted nanostructures; tuning the size and shape. Switching the gas from oxygen to carbon monoxide permits the adjustment in nanostructure growth from 1D (nanorods) to 2D (nanosheets). CO is a key factor in the formation of Pd nanosheets and Pt nanocubes; operating as a second phase, a reductant, and a capping agent. This combination confines the growth to specific structures. In addition, the segmented flow microfluidic reactor inherently has the ability to operate in a reproducible manner at elevated temperatures and pressures whilst confining potentially toxic reactants, such as CO, in nanoliter slugs. This continuous system successfully synthesised Pd nanorods with an aspect ratio of 6; thin palladium nanosheets with a thickness of 1.5 nm; and Pt nanocubes with a 5.6 nm edge length, all in a synthesis time as low as 150 s.

The non-aqueous synthesis of shape controllable Cu(2-x)S plasmonic nanostructures in a continuous-flow millifluidic chip for the generation of photo-induced heating

In this paper, a new method for synthesizing non-aqueous copper sulfide nanocrystals with different shapes and sizes using a homemade continuous-flow millifluidic chip is presented. Conventionally, the shape control of nanocrystals was accomplished using a surfactant-controlled approach, where directional growth is facilitated by selective passivation of a particular facet of the nanocrystals using surfactants. We demonstrate a "surfactant-free" approach where different sizes and shapes (i.e. spherical, triangular prism and rod) of plasmonic copper sulfide (Cu(2-x)S) nanocrystals can be fabricated by adjusting the flow rate and precursor concentrations. As continuous-flow synthesis enables uniform heating and easy variation of precursors' stoichiometries, it serves as an excellent incubation platform for nanoparticles due to its simplicity and high reproducibility. Transmission electron microscopy (TEM), fast Fourier transform (FFT) and X-ray diffraction (XRD) techniques were used to characterize the as-synthesized nanocrystals and revealed structures ranging from copper-deficient covellite (CuS), spionkopite (Cu1.39S), roxbyite (Cu1.75S), to copper-rich djurleite (Cu1.94S). The localized surface plasmon resonance (LSPR) peak of the nanocrystals can be tuned from 1115 to 1644 nm by simply varying the copper to sulfur molar ratio and flow rate. Furthermore, photothermal effects of Cu(2-x)S nanocrystals were also demonstrated to annihilate the RAW264.7 cells upon near infra-red laser irradiation.

Flow invariant droplet formation for stable parallel microreactors

The translation of batch chemistries onto continuous flow platforms requires addressing the issues of consistent fluidic behaviour, channel fouling and high-throughput processing. Droplet microfluidic technologies reduce channel fouling and provide an improved level of control over heat and mass transfer to control reaction kinetics. However, in conventional geometries, the droplet size is sensitive to changes in flow rates. Here we report a three-dimensional droplet generating device that exhibits flow invariant behaviour and is robust to fluctuations in flow rate. In addition, the droplet generator is capable of producing droplet volumes spanning four orders of magnitude. We apply this device in a parallel network to synthesize platinum nanoparticles using an ionic liquid solvent, demonstrate reproducible synthesis after recycling the ionic liquid, and double the reaction yield compared with an analogous batch synthesis.

Anisotropic Nanoparticles and Anisotropic Surface Chemistry

Anisotropic nanoparticles are powerful building blocks for materials engineering. Unusual properties emerge with added anisotropy-often to an extraordinary degree-enabling countless new applications. For bottom-up assembly, anisotropy is crucial for programmability; isotropic particles lack directional interactions and can self-assemble only by basic packing rules. Anisotropic particles have long fascinated scientists, and their properties and assembly behavior have been the subjects of many theoretical studies over the years. However, only recently has experiment caught up with theory. We have begun to witness tremendous diversity in the synthesis of nanoparticles with controlled anisotropy. In this Perspective, we highlight the synthetic achievements that have galvanized the field, presenting a comprehensive discussion of the mechanisms and products of both seed-mediated and alternative growth methods. We also address recent breakthroughs and challenges in regiospecific functionalization, which is the next frontier in exploiting nanoparticle anisotropy.

Highly scalable, closed-loop synthesis of drug-loaded, layer-by-layer nanoparticles

Layer-by-layer (LbL) self-assembly is a versatile technique from which multicomponent and stimuli-responsive nanoscale drug carriers can be constructed. Despite the benefits of LbL assembly, the conventional synthetic approach for fabricating LbL nanoparticles requires numerous purification steps that limit scale, yield, efficiency, and potential for clinical translation. In this report, we describe a generalizable method for increasing throughput with LbL assembly by using highly scalable, closed-loop diafiltration to manage intermediate purification steps. This method facilitates highly controlled fabrication of diverse nanoscale LbL formulations smaller than 150 nm composed from solid-polymer, mesoporous silica, and liposomal vesicles. The technique allows for the deposition of a broad range of polyelectrolytes that included native polysaccharides, linear polypeptides, and synthetic polymers. We also explore the cytotoxicity, shelf life and long-term storage of LbL nanoparticles produced using this approach. We find that LbL coated systems can be reliably and rapidly produced: specifically, LbL-modified liposomes could be lyophilized, stored at room temperature, and reconstituted without compromising drug encapsulation or particle stability, thereby facilitating large scale applications. Overall, this report describes an accessible approach that significantly improves the throughput of nanoscale LbL drug-carriers that show low toxicity and are amenable to clinically relevant storage conditions.

High temperature continuous flow synthesis of CdSe/CdS/ZnS, CdS/ZnS, and CdSeS/ZnS nanocrystals

Continuous flow reactors show great promise for large-scale synthesis of quantum dots. Here, we discuss results for the synthesis of multi-layered Cd-based hybrid nanocrystals - CdSe/CdS/ZnS, CdS/ZnS, and CdSeS/ZnS - in a continuous flow reactor. The simple reactor design and liquid-phase chemistry obviate the need for preheating or in-line mixing, and the chosen reactor dimensions and operating conditions allow for high flow rates (∼10 mL min(-1)). Additionally, the simple reactor design is well suited for scale-up. The CdSe/CdS/ZnS particles synthesized at elevated temperatures in the reactor exhibit quantum yields of over 60% at longer wavelengths (red region). The shell growth for these particles is conducted without the need for complex dropwise addition or SILAR shell growth procedures used in batch reactors. CdS-based particles were shown to have a higher performance when using octadecene-S instead of TOP-S, which improved the quality of shell growth. In addition, stoichiometric synthesis of the alternate CdSeS/ZnS alloy particles was conducted, removing the need for a large excess of S to offset the lower S reactivity. CdSeS/ZnS alloy nanoparticles exhibit quantum yields of about 50% in the intermediate wavelength range (500-600 nm).

Fully understanding the positive roles of plasmonic nanoparticles in ameliorating the efficiency of organic solar cells

Herein, we constructed inverted PBDTTT-CF:PC70BM bulk-heterojunction organic solar cells by introducing Au nanoparticles to a ZnO buffer layer and a great improvement in energy conversion efficiency has been realized. To discover the positive roles of such plasmonic nanoparticles in the process of solar energy conversion, photovoltaic devices with the same architecture but different sized Au nanoparticles were purposely fabricated and it has been observed that the overall efficiency can be remarkably improved from 6.67% to 7.86% by embedding 41 nm Au nanoparticles in the buffer layer. The devices with other sizes of Au nanoparticles show a relatively low performance. Subsequent investigations including finite difference time domain simulation and transient photoluminescence studies reveal that the existence of the plasmonic particles could not only improve the optical absorption and facilitate the exciton separation, but can also benefit the collection of charge carriers. Thus, this paper provides a comprehensive perspective on the roles of plasmonic particles in organic solar cells and insights into the photo energy conversion process in the plasmonic surroundings.

Impacts of gold nanoparticle charge and ligand type on surface binding and toxicity to Gram-negative and Gram-positive bacteria

Although nanomaterials facilitate significant technological advancement in our society, their potential impacts on the environment are yet to be fully understood. In this study, two environmentally relevant bacteria, Shewanella oneidensis and Bacillus subtilis, have been used as model organisms to elucidate the molecular interactions between these bacterial classes and Au nanoparticles (AuNPs) with well-controlled and well-characterized surface chemistries: anionic 3-mercaptopropionic acid (MPA), cationic 3-mercaptopropylamine (MPNH2), and the cationic polyelectrolyte poly(allylamine hydrochloride) (PAH). The data demonstrate that cationic, especially polyelectrolyte-wrapped AuNPs, were more toxic to both the Gram-negative and Gram-positive bacteria. The levels of toxicity observed were closely related to the percentage of cells with AuNPs associated with the cell surface as measured in situ using flow cytometry. The NP concentration-dependent binding profiles were drastically different for the two bacteria strains, suggesting the critical role of bacterial cell surface chemistry in determining nanoparticle association, and thereby, biological impact.

Lipopolysaccharide Density and Structure Govern the Extent and Distance of Nanoparticle Interaction with Actual and Model Bacterial Outer Membranes

Design of nanomedicines and nanoparticle-based antimicrobial and antifouling formulations and assessment of the potential implications of nanoparticle release into the environment requires understanding nanoparticle interaction with bacterial surfaces. Here we demonstrate the electrostatically driven association of functionalized nanoparticles with lipopolysaccharides of Gram-negative bacterial outer membranes and find that lipopolysaccharide structure influences the extent and location of binding relative to the outer leaflet-solution interface. By manipulating the lipopolysaccharide content in Shewanella oneidensis outer membranes, we observed the electrostatically driven interaction of cationic gold nanoparticles with the lipopolysaccharide-containing leaflet. We probed this interaction by quartz crystal microbalance with dissipation monitoring (QCM-D) and second harmonic generation (SHG) using solid-supported lipopolysaccharide-containing bilayers. The association of cationic nanoparticles increased with lipopolysaccharide content, while no association of anionic nanoparticles was observed. The harmonic-dependence of QCM-D measurements suggested that a population of the cationic nanoparticles was held at a distance from the outer leaflet-solution interface of bilayers containing smooth lipopolysaccharides (those bearing a long O-polysaccharide). Additionally, smooth lipopolysaccharides held the bulk of the associated cationic particles outside of the interfacial zone probed by SHG. Our results demonstrate that positively charged nanoparticles are more likely to interact with Gram-negative bacteria than are negatively charged particles, and this interaction occurs primarily through lipopolysaccharides.

Gold Nanorods Indirectly Promote Migration of Metastatic Human Breast Cancer Cells in Three-Dimensional Cultures

Gold nanomaterials are intensively studied for applications in disease detection, diagnosis and therapeutics, and this has motivated considerable research to determine their interaction with biomolecules, cells and cell behaviors. However, few studies look at how nanomaterials alter the extracellular matrix (ECM) and cell-ECM interactions. Nanomaterials in the body would interact with the entire cellular environment, and it is imperative to account for this when studying the impact of nanomaterials on living systems. Furthermore, recent evidence finds that migration rates of cells in 2D can be affected by nanomaterials, and uptake of the nanomaterials is not necessary to exert an effect. In this study, three-dimensional nested type I collagen matrices were utilized as a model ECM to study how gold nanorods affect the migration of MDA-MB-231 human breast cancer cells. Spontaneous cell migration through collagen containing gold nanorods was found to increase with increasing concentrations of gold nanorods, independent of intracellular uptake of the nanorods. Gold nanorods in the collagen matrix were found to alter collagen mechanical properties and structure, molecular diffusion, cellular adhesion, cell morphology, mode of migration and protease expression. Correlation between decreased cellular adhesion and rounded cell morphology and locomotion in nanorod-containing collagen suggests the induction of an amoeboid-like migratory phenotype.

Synthesis of Absorption-Dominant Small Gold Nanorods and Their Plasmonic Properties

Absorption-dominant small Au nanorods with diameters of less than 10 nm are prepared using a facile seed-mediated growth method. The diameters of the small gold nanorods range from 6 to 9 nm, and their lengths vary from 16 to 45 nm. Their aspect ratios can be tailored from 2.7 to 4.7. As a result, the longitudinal plasmon resonance wavelengths are readily tunable from ∼720 nm to ∼830 nm by changing the seed-to-Au(III) molar ratio in the growth solution. The fractions of the scattering in the total extinction of the small Au nanorods are found to be in the range of 0.005 to 0.025 with finite-difference time-domain simulations, confirming that the extinction values of these small Au nanorods are dominantly contributed to by the light absorption. Moreover, the small Au nanorod sample is coated with a dense silica layer for photothermal therapy with three cell lines. It shows improved photothermal therapy performance compared to a large Au nanorod sample for the same cellular Au contents. Our study suggests that small Au nanorods are promising light absorbers and photothermal therapy agents.

Effects of charge and surface ligand properties of nanoparticles on oxidative stress and gene expression within the gut of Daphnia magna

Concern has been raised regarding the current and future release of engineered nanomaterials into aquatic environments from industry and other sources. However, not all nanomaterials may cause an environmental impact and identifying which nanomaterials may be of greatest concern has been difficult. It is thought that the surface groups of a functionalized nanoparticles (NPs) may play a significant role in determining their interactions with aquatic organisms, but the way in which surface properties of NPs impact their toxicity in whole organisms has been minimally explored. A major point of interaction of NPs with aquatic organisms is in the gastrointestinal tract as they ingest particulates from the water column or from the sediment. The main goal of this study was to use model gold NP (AuNPs) to evaluate the potential effects of the different surfaces groups on NPs on the gut of an aquatic model organism, Daphnia magna. In this study, we exposed daphnids to a range of AuNPs concentrations and assessed the impact of AuNP exposure in the daphnid gut by measuring reactive oxygen species (ROS) production and expression of genes associated with oxidative stress and general cellular stress: glutathione S-transferase (gst), catalase (cat), heat shock protein 70 (hsp70), and metallothionein1 (mt1). We found ROS formation and gene expression were impacted by both charge and the specific surface ligand used. We detected some degree of ROS production in all NP exposures, but positively charged AuNPs induced a greater ROS response. Similarly, we observed that, compared to controls, both positively charged AuNPs and only one negatively AuNP impacted expression of genes associated with cellular stress. Finally, ligand-AuNP exposures showed a different toxicity and gene expression profile than the ligand alone, indicating a NP specific effect.

A versatile and robust microfluidic platform toward high throughput synthesis of homogeneous nanoparticles with tunable properties

A versatile and robust microfluidic nanoprecipitation platform for high throughput synthesis of nanoparticles is fabricated. The versatility of this platform is proven through the successful preparation of different types of nanoparticles. This platform presents great robustness, with homogeneous nanoparticles always being obtained, regardless of the formulation parameters. The diameter and surface charge of the prepared nanoparticles can also be easily tuned.

Multilayered core-satellite nanoassemblies with fine-tunable broadband plasmon resonances

We report on a robust nanotemplating approach to synthesize plasmonic multilayered core-satellite (MCS) nanoassemblies. Templated with gold nanorods, ultrathin Au/Ag alloy cages and satellite gold nanoparticles can be constructed sequentially by galvanic replacement reactions and electrostatic self-assembly, respectively, forming structurally well-defined MCS. The MCS nanoassemblies exhibit strong broadband plasmon resonances from ∼440 to ∼1100 nm, and their resonant features can be fine-tuned by adjusting the size and number density of satellite nanoparticles and by adjusting the thickness of the silica spacer between cage and satellite particles. Such fine-engineered MCS nanoassemblies enable precise programming of the strength and distribution of "hot spots" to maximize the overall enhancement of surface enhanced Raman scattering.

Chiral nematic cellulose–gold nanoparticle composites from mesoporous photonic cellulose

Nearly monodisperse gold nanoparticles with chiroptical properties are prepared by the in situ reduction of Au³⁺ inside mesoporous photonic cellulose.

Microfluidic-based controllable synthesis of Pt nanocatalysts supported on carbon for fuel cells

A simple custom-made microfluidic reactor is used to synthesize Pt nanoparticles supported on carbon continuously as electrocatalysts for fuel cells.

Strategies for interfacing inorganic nanocrystals with biological systems based on polymer-coating

A representative set of nanocrystals made of semiconductors, Au and iron oxide, surface-capped with polymer ligands presenting various metal-coordinating groups.

A microfluidic-based controllable synthesis of rolled or rigid ultrathin gold nanoplates

A microfluidic-based controllable seeded synthesis of rolled or rigid ultrathin gold nanoplates.

Continuous and scalable production of well-controlled noble-metal nanocrystals in milliliter-sized droplet reactors

Noble-metal nanocrystals are essential to applications in a variety of areas, including catalysis, electronics, and photonics. Despite the large number of reports, there still exists a gap between academic studies and industrial applications due to the lack of ability to produce the nanocrystals in large quantities while still maintaining the good uniformity and precise controls. Because the nucleation and growth of colloidal nanocrystals are highly sensitive to experimental conditions, it is impractical to scale up their production by simply increasing the reaction volume. Here we report a new and practical approach based on milliliter-sized droplet reactors to the scalable production of nanocrystals. The droplets of 0.25 mL in volume were produced as a continuous flow in a fluidic device assembled from commercially available components. As a proof of concept, we have synthesized Pd, Au, and Pd-M (M = Au, Pt, and Ag) nanocrystals with controlled sizes, shapes, compositions, and structures on a scale of 1-10 g per hour (e.g., 3.6 g per hour for Pd cubes of 10 nm in edge length).

Synthesis of colloidal metal nanocrystals in droplet reactors: the pros and cons of interfacial adsorption

Droplet reactors have received considerable attention in recent years as an alternative route to the synthesis and potentially high-volume production of colloidal metal nanocrystals. Interfacial adsorption will immediately become an important issue to address when one seeks to translate a nanocrystal synthesis from batch reactors to droplet reactors due to the involvement of higher surface-to-volume ratios for the droplets and the fact that nanocrystals tend to be concentrated at the water-oil interface. Here we report a systematic study to compare the pros and cons of interfacial adsorption of metal nanocrystals during their synthesis in droplet reactors. On the one hand, interfacial adsorption can be used to generate nanocrystals with asymmetric shapes or structures, including one-sixth-truncated Ag octahedra and Au-Ag nanocups. On the other hand, interfacial adsorption has to be mitigated to obtain nanocrystals with uniform sizes and controlled shapes. We confirmed that Triton X-100, a nonionic surfactant, could effectively alleviate interfacial adsorption while imposing no impact on the capping agent typically needed for a shape-controlled synthesis. With the introduction of a proper surfactant, droplet reactors offer an attractive platform for the continuous production of colloidal metal nanocrystals.

Microfluidic-SERS devices for one shot limit-of-detection

Microfluidic sensing platforms facilitate parallel, low sample volume detection using various optical signal transduction mechanisms. Herein, we introduce a simple mixing microfluidic device, enabling serial dilution of introduced analyte solution that terminates in five discrete sensing elements. We demonstrate the utility of this device with on-chip fluorescence and surface-enhanced Raman scattering (SERS) detection of analytes, and we demonstrate device use both when combined with a traditional inflexible SERS substrate and with SERS-active nanoparticles that are directly incorporated into microfluidic channels to create a flexible SERS platform. The results indicate, with varying sensitivities, that either flexible or inflexible devices can be easily used to create a calibration curve and perform a limit of detection study with a single experiment.

Scaling up the production of colloidal nanocrystals: should we increase or decrease the reaction volume?

Recent progress in facet-controlled syntheses has started to produce nanocrystals with great promise as the next-generation catalysts for a variety of applications. To move from academic studies to industrial applications, however, one has to address the issue of scaling up a synthesis that has been commonly conducted in a batch format. There are two opposite approaches to scaling up the production of colloidal nanocrystals: increasing and decreasing the reaction volume. Contrary to conventional wisdom, continuous flow synthesis based on droplets is expected to provide a more practical platform for scaling up the synthesis. Here we highlight recent progress in using droplet reactors for the synthesis of colloidal noble-metal nanocrystals with controlled sizes and shapes, with an aim towards high-volume production.

Silver iodide microstructures of a uniform towerlike shape: morphology purification via a chemical dissolution, simultaneously boosted catalytic durability, and enhanced catalytic performances

The fabrication of microstructures/nanostructures of a uniform yet well-defined morphology has attracted broad interest from a variety of fields of advanced functional materials, especially catalysts. Most of the conventional methods generally suffer from harsh synthesis conditions, requirement of bulky apparatus, or incapability of scalable production, etc. To meet these formidable challenges, it is strongly desired to develop a facile, cost-effective, scalable method to fulfill a morphology purification. By a precipitation reaction between AgNO3 and KI, we report that irregular AgI structures, or their mixture with towerlike AgI architectures could be fabricated. Compared to the former, the mixed structures exhibit enhanced catalytic reactivity toward the photodegradation of Methyl Orange pollutant. However, its catalytic durability, which is one of the most crucial criteria that are required by superior catalysts, is poor. We further show that the irregular structures could be facilely removed from the mixture via a KI-assisted chemical dissolution, producing AgI of a uniform towerlike morphology. Excitingly, after such simple morphology purification, our towerlike AgI displays not only a boosted catalytic durability but also an enhanced catalytic reactivity. Our chemical dissolution-based morphology purification protocol might be extended to other systems, wherein high-quality advanced functional materials of desired properties might be developed.

High yield seedless synthesis of high-quality gold nanocrystals with various shapes

In this Article, high-quality gold nanocrystals (Au NCs) with various shapes including concave cubic, trisoctahedral, cubic, rod-like, and quasi-spherical have been successfully produced in high yield via adding a trace amount of NaBH4 solution into growth solutions mainly composed of HAuCl4, ascorbic acid, and surfactants. The sizes and shapes of as-prepared Au NCs can be tuned by the compositions of the growth solutions and the amount of NaBH4 added. The electrocatalytic performance of differently shaped Au NCs for methanol oxidation was studied; as-prepared trisoctahedral or concave cubic Au NCs are more highly active electrocatalysts for methanol oxidation due to the presence of high-index facets on their surface.

Scaled-up production of plasmonic nanoparticles using microfluidics: from metal precursors to functionalized and sterilized nanoparticles

An exquisite control of synthesis parameters is generally required in nanomaterial synthesis to guarantee consistency in the essential characteristics such as size and shape. On the other hand, reliable scaled-up production of nanomaterials is required in order to achieve the production rates required for emerging nanotechnology applications while delivering a consistent product with the intended characteristics, avoiding the traditional batch-to-batch deviations. The continuous production of nanomaterials is challenging because of the difficulties involved in translating the complexity of nanomaterial synthesis into on-line operations. In this regard, microfluidic platforms stand out over conventional batch reactors due to their superior performance, easy scalability and reliability. Here, a continuous, scaled-up synthesis of high quality plasmonic hollow gold nanoparticles is reported for the first time. Not only was the throughput significantly higher than in a batch reactor, but also the microfluidic system allowed the on-line implementation of two new stages in nanomaterial production: surface functionalization and sterilization.

Probing distance-dependent plasmon-enhanced near-infrared fluorescence using polyelectrolyte multilayers as dielectric spacers

Owing to their applications in biodetection and molecular bioimaging, near-infrared (NIR) fluorescent dyes are being extensively investigated. Most of the existing NIR dyes exhibit poor quantum yield, which hinders their translation to preclinical and clinical settings. Plasmonic nanostructures are known to act as tiny antennae for efficiently focusing the electromagnetic field into nanoscale volumes. The fluorescence emission from NIR dyes can be enhanced by more than thousand times by precisely placing them in proximity to gold nanorods. We have employed polyelectrolyte multilayers fabricated using layer-by-layer assembly as dielectric spacers for precisely tuning the distance between gold nanorods and NIR dyes. The aspect ratio of the gold nanorods was tuned to match the longitudinal localized surface plasmon resonance wavelength with the absorption maximum of the NIR dye to maximize the plasmonically enhanced fluorescence. The design criteria derived from this study lays the groundwork for ultrabright fluorescence bullets for in vitro and in vivo molecular bioimaging.

Preparation of biofunctionalized quantum dots using microfluidic chips for bioimaging

Biofunctionalized quantum dots were prepared using microfluidic chips and were used as optical probes for imaging live cells.

Large-Scale Synthesis of Gold Nanorods through Continuous Secondary Growth

Gold nanorods (GNRs) exhibit a tunable longitudinal surface plasmon resonance (LSPR) that depends on the GNR aspect ratio (AR). Independently controlling the AR and size of GNRs remains challenging but is important because the scattering intensity strongly depends on the GNR size. Here, we report a secondary (seeded) growth procedure, wherein continuous addition of ascorbic acid (AA) to a stirring solution of GNRs, stabilized by cetyltrimethylammonium bromide (CTAB) and synthesized by a common GNR growth procedure, deposits the remaining (~70%) of the Au precursor onto the GNRs. The growth phase of GNR synthesis is often performed without stirring, since stirring has been believed to reduce the yield of rod-shaped nanoparticles, but we report that stirring coupled with continuous addition of AA during secondary growth allows improved control over the AR and size of GNRs. After a common primary GNR growth procedure, the LSPR of GNRs is ~820 nm, which can be tuned between ~700-880 nm during secondary growth by adjusting the rate of AA addition or adding benzyldimethylhexadecylammonium chloride hydrate (BDAC). This approach for secondary growth can also be used with primary GNRs of different ARs to achieve different LSPRs and can likely be extended to nanoparticles of different shapes and other metals.

Lab-on-a-chip synthesis of inorganic nanomaterials and quantum dots for biomedical applications

The past two decades have seen a dramatic raise in the number of investigations leading to the development of Lab-on-a-Chip (LOC) devices for synthesis of nanomaterials. A majority of these investigations were focused on inorganic nanomaterials comprising of metals, metal oxides, nanocomposites and quantum dots. Herein, we provide an analysis of these findings, especially, considering the more recent developments in this new decade. We made an attempt to bring out the differences between chip-based as well as tubular continuous flow systems. We also cover, for the first time, various opportunities the tools from the field of computational fluid dynamics provide in designing LOC systems for synthesis inorganic nanomaterials. Particularly, we provide unique examples to demonstrate that there is a need for concerted effort to utilize LOC devices not only for synthesis of inorganic nanomaterials but also for carrying out superior in vitro studies thereby, paving the way for faster clinical translation. Even though LOC devices with the possibility to carry out multi-step syntheses have been designed, surprisingly, such systems have not been utilized for carrying out simultaneous synthesis and bio-functionalization of nanomaterials. While traditionally, LOC devices are primarily based on microfluidic systems, in this review article, we make a case for utilizing millifluidic systems for more efficient synthesis, bio-functionalization and in vitro studies of inorganic nanomaterials tailor-made for biomedical applications. Finally, recent advances in the field clearly point out the possibility for pushing the boundaries of current medical practices towards personalized health care with a vision to develop automated LOC-based instrumentation for carrying out simultaneous synthesis, bio-functionalization and in vitro evaluation of inorganic nanomaterials for biomedical applications.