Population dynamics of filamentous bacteria identified in Polish full-scale wastewater treatment plants with nutrients removal

A comprehensive study of the identity and population dynamics of filamentous bacteria in five Polish full-scale municipal wastewater treatment plants (WWTPs) with nutrients removal had been carried out for 2 years. A quantitative culture-independent, molecular method - fluorescence in situ hybridization - was applied to evaluate the structure of different filamentous bacteria populations and their temporal variations. Activated sludge was examined for the abundance of 11 groups of filamentous bacteria. On average, filaments constituted 28% of all bacteria. All samples presented a low diversity of probe-defined filamentous bacteria, usually with significant domination of Chloroflexi (with distinction to types 1851, 0803 and others) and/or Microthrix (14% and 7% of EUBmix, respectively). Haliscomenobacter hydrossis, Mycolata, Skermania piniformis and TM7 were less abundant, whereas Curvibacter, Thiothrix/021N and family Gordonia have not been detected in any of the samples. The tested WWTPs showed similarity among species found and differences in their abundance. The composition of filamentous populations was rather stable in each plant and similar to those found in other European countries. Little differences between plants were shown by multivariate analysis of variance in terms of Chloroflexi and Microthrix. No significant general correlations have been found with Pearson product-moment correlation coefficient and Spearman's rank correlation coefficient. Medium correlation strength between the presence of different filaments was recorded only for Microthrix and Skermania piniformis. Deleterious effect on settling properties of sludge (measured as sludge volume index) was found only for abundance of Microthrix; a strong linear correlation was recorded between them. However, no other correlations with wastewater and operational data were revealed.

The importance of fungi and mycology for addressing major global challenges*

In the new bioeconomy, fungi play a very important role in addressing major global challenges, being instrumental for improved resource efficiency, making renewable substitutes for products from fossil resources, upgrading waste streams to valuable food and feed ingredients, counteracting life-style diseases and antibiotic resistance through strengthening the gut biota, making crop plants more robust to survive climate change conditions, and functioning as host organisms for production of new biological drugs.

This range of new uses of fungi all stand on the shoulders of the efforts of mycologists over generations: the scientific discipline mycology has built comprehensive understanding within fungal biodiversity, classification, evolution, genetics, physiology, ecology, pathogenesis, and nutrition. Applied mycology could not make progress without this platform. To unfold the full potentials of what fungi can do for both environment and man we need to strengthen the field of mycology on a global scale.

The current mission statement gives an overview of where we are, what needs to be done, what obstacles to overcome, and which potentials are within reach. It further provides a vision for how mycology can be strengthened:

The time is right to make the world aware of the immense importance of fungi and mycology for sustainable global development, where land, water and biological materials are used in a more efficient and more sustainable manner. This is an opportunity for profiling mycology by narrating the role played by fungi in the bioeconomy. Greater awareness and appreciation of the role of fungi can be used to build support for mycology around the world. Support will attract more talent to our field of study, empower mycologists around the world to generate more funds for necessary basic research, and strengthen the global mycology network. The use of fungi for unlocking the full potentials of the bioeconomy relies on such progress. The fungal kingdom can be an inspiration for even more.

Filamentous sludge bulking control by nano zero-valent iron in activated sludge treatment systems

Sludge bulking causes loss of biomass in the effluent and deterioration of effluent water quality. This study explored the use of nano zero-valent iron (NZVI with an average particle size of 55 ± 11 nm) for sludge bulking control. In two Modified Ludzack-Ettinger (MLE) activated sludge treatment systems, a single dose of NZVI at the final concentration of 100 mg Fe per L in the mixed liquor reduced the number of filamentous bacteria Type 021N by 2-3 log units (a reduction of 99.9 and 96.7% in MLE tank #1 and #2, respectively). The side effect of the use of NZVI depended on sludge bulking conditions and biomass concentration. In the system with sludge bulking and significant sludge loss (average biomass concentration of 1022 ± 159 COD mg per L or at the ratio of 0.098 g Fe per g biomass COD), the use of NZVI increased effluent COD, NH4(+)-N and NO2(-)-N concentrations, as also evident with the loss of nitrifying populations and nitrifying activities resulting in more than 40 days to have the full recovery of the activated sludge system. In contrast, in the system with the early stages of bulking and the biomass concentration of 1799 ± 113 COD mg per L (at the ratio of 0.056 g Fe per g biomass COD), the effluent water quality and overall bioreactor performance were only slightly affected for a few days.

Essence of disposing the excess sludge and optimizing the operation of wastewater treatment: rheological behavior and microbial ecosystem

Proper disposal of excess sludge and steady maintenance of the high bioactivity of activated sludge in bioreactors are essential for the successful operation of wastewater treatment plants (WWTPs). Since sludge is a non-Newtonian fluid, the rheological behavior of sludge can therefore have a significant impact on various processes in a WWTP, such as fluid transportation, mixing, oxygen diffusion, mass transfer, anaerobic digestion, chemical conditioning and mechanical dewatering. These are key factors affecting the operation efficiency and the energy consumption of the entire process. In the past decade-due to the production of large quantities of excess sludge associated with the extensive construction of WWTPs and the emergence of some newly-developed techniques for wastewater purification characterized by high biomass concentrations-investigations into the rheology of sludge are increasingly important and this topic has aroused considerable interests. We reviewed a number of investigations into the rheology of sludge, with the purpose of providing systematic and detailed analyses on the related aspects of the rheological behavior of sludge. It is clear that, even though considerable research has focused on the rheology of sludge over a long time period, there is still a need for further thorough investigation into this field. Due to the complex process of bio-treatment in all WWTPs, biological factors have a major influence on the properties of sludge. These influences are however still poorly understood, particularly with respect to the mechanisms involved and magnitude of such impacts. When taking note of the conspicuous biological characteristics of sludge, it becomes important that biological factors, such as the species composition and relative abundance of various microorganisms, as well as the microbial community characteristics that affect relevant operating processes, should be considered.

Development and evaluation of a TaqMan duplex real-time PCR quantification method for reliable enumeration of Candidatus Microthrix

Candidatus Microtrhix parvicella is one of the most common filamentous bacteria reported to be involved in bulking and foaming problems in activated sludge plants worldwide. In order to detect and quantify both M. parvicella and Microthrix calida by quantitative PCR (qPCR), primers targeting 16S rDNA genes were designed. The qPCR reaction was optimized by using the TaqMan technology and an internal positive control was included to ensure the absence of PCR inhibitors. A total of 29 samples originating from different wastewater treatment plants were analyzed and the results were compared by using conventional microscopy, fluorescent in situ hybridization and an existing SYBR Green-based assay. Our assay showed a 100% specificity for both M. parvicella and M. calida, a sensitivity of 2.93×10(9) to 29 copy numbers/reaction, an amplification efficiency of 93% and no PCR inhibition. By performing a spiking experiment including different Microthrix concentrations, recovery rates ranging from 65 to 98% were obtained. A positive correlation with the SYBR Green assay (R(2)=0.85) was found and most of the samples were in accordance with the microscopical observation. In comparison with SYBR Green assay, the probe-based TaqMan assay had a much lower detection limit. Compared with microscopy, some samples had a lower or higher enumeration when using qPCR. In conclusion, a qPCR method is forwarded here that could be useful as an early warning tool for fast and reliable detection of Microthrix in for instance sludge bulking events.

Filtration properties of activated sludge in municipal MBR wastewater treatment plants are related to microbial community structure

In the conventional activated sludge process, a number of important parameters determining the efficiency of settling and dewatering are often linked to specific groups of bacteria in the sludge--namely floc size, residual turbidity, shear sensitivity and composition of extracellular polymeric substances (EPS). In membrane bioreactors (MBRs) the nature of solids separation at the membrane has much in common with sludge dewaterability but less is known about the effect of specific microbial groups on the sludge characteristics that affect this process. In this study, six full-scale MBR plants were investigated to identify correlations between sludge filterability, sludge characteristics, and microbial community structure. The microbial community structure was described by quantitative fluorescence in situ hybridization and sludge filterability by a low-pressure filtration method. A strong correlation between the degree of flocculation (ratio between floc size and residual turbidity) and sludge filterability at low pressure was found. A good balance between EPS and cations in the sludge correlated with good flocculation, relatively large sludge flocs, and low amounts of small particles and single cells in the bulk phase (measured as residual turbidity), all leading to a good filterability. Floc properties could also be linked to the microbial community structure. Bacterial species forming strong microcolonies such as Nitrospira and Accumulibacter were present in plants with good flocculation and filtration properties, while few strong microcolonies and many filamentous bacteria in the plants correlated with poor flocculation and filtration problems. In conclusion this study extends the hitherto accepted perception that plant operation affects floc properties which affects fouling. Additionally, plant operation also affects species composition, which affects floc properties and in the end fouling propensity.

Do biological-based strategies hold promise to biofouling control in MBRs?

Biofouling in membrane bioreactors (MBRs) remains a primary challenge for their wider application, despite the growing acceptance of MBRs worldwide. Research studies on membrane fouling are extensive in the literature, with more than 200 publications on MBR fouling in the last 3 years; yet, improvements in practice on biofouling control and management have been remarkably slow. Commonly applied cleaning methods are only partially effective and membrane replacement often becomes frequent. The reason for the slow advancement in successful control of biofouling is largely attributed to the complex interactions of involved biological compounds and the lack of representative-for-practice experimental approaches to evaluate potential effective control strategies. Biofouling is driven by microorganisms and their associated extra-cellular polymeric substances (EPS) and microbial products. Microorganisms and their products convene together to form matrices that are commonly treated as a black box in conventional control approaches. Biological-based antifouling strategies seem to be a promising constituent of an effective integrated control approach since they target the essence of biofouling problems. However, biological-based strategies are in their developmental phase and several questions should be addressed to set a roadmap for translating existing and new information into sustainable and effective control techniques. This paper investigates membrane biofouling in MBRs from the microbiological perspective to evaluate the potential of biological-based strategies in offering viable control alternatives. Limitations of available control methods highlight the importance of an integrated anti-fouling approach including biological strategies. Successful development of these strategies requires detailed characterization of microorganisms and EPS through the proper selection of analytical tools and assembly of results. Existing microbiological/EPS studies reveal a number of implications as well as knowledge gaps, warranting future targeted research. Systematic and representative microbiological studies, complementary utilization of molecular and biofilm characterization tools, standardized experimental methods and validation of successful biological-based antifouling strategies for MBR applications are needed. Specifically, in addition, linking these studies to relevant operational conditions in MBRs is an essential step to ultimately develop a better understanding and more effective and directed control strategy for biofouling.

Microbial community and N removal of aerobic granular sludge at high COD and N loading rates

An aerobic granular sludge, cultivated with modified piggery wastewater, was capable of simultaneously removing COD and N at high COD and N loading rates. Confirmed to be identical with the DGGE band B9, isolate Thauera strain TN9 was the most dominant microorganism in the granular sludge. NirS and NosZ gene were amplified and sequenced from strain TN9 suggested it is crucial to N removal. Some other dominant DGGE bands belonged to Zoogloea and TM7, might play important roles in the formation and the stabilization of the granules. Meanwhile, no AOA amoA or anammox bacterium hzo gene was detected in the granules. All amoA clone libraries of AOB were clustered to Nitrosomonas. Yet those AOB were not present in DGGE dominant bands. Therefore, the heterotrophic nitrification and autotrophic nitrification coexist in the granules, the heterotrophic nitrification might contribute more to the N removal at high COD and N loading rates.

Nutrient removal performance and microbial community structure in an EBPR system under the limited filamentous bulking state

Limited filamentous bulking (LFB) was proposed to be a new method for saving energy and improving effluent quality. In order to validate the stability of LFB in enhanced biological phosphorus removal (EBPR) systems, the LFB was further achieved in a lab-scale EBPR. Nutrient removal performance and microbial community structure including dominant filaments and polyphosphate-accumulating organisms (PAOs) were investigated. Results showed that the enriched PAOs could alleviate the negative effect of low dissolved oxygen concentration on sludge settleability, making the LFB be more easily achieved and maintained in the EBPR for long-term operation. Sludge volume index was kept between 150-200 mL/g during the LFB period. Larger floc size (≥400 μm) was commonly observed under the LFB state, which significantly enhanced the simultaneous nitrification and denitrification (SND) efficiency. An average SND efficiency of 36% was observed in the EBPR system when the LFB occurred.

Mobile elements in a single-filament orange Guaymas Basin Beggiatoa ("Candidatus Maribeggiatoa") sp. draft genome: evidence for genetic exchange with cyanobacteria

The draft genome sequence of a single orange Beggiatoa ("Candidatus Maribeggiatoa") filament collected from a microbial mat at a hydrothermal site in Guaymas Basin (Gulf of California, Mexico) shows evidence of extensive genetic exchange with cyanobacteria, in particular for sensory and signal transduction genes. A putative homing endonuclease gene and group I intron within the 23S rRNA gene; several group II catalytic introns; GyrB and DnaE inteins, also encoding homing endonucleases; multiple copies of sequences similar to the fdxN excision elements XisH and XisI (required for heterocyst differentiation in some cyanobacteria); and multiple sequences related to an open reading frame (ORF) (00024_0693) of unknown function all have close non-Beggiatoaceae matches with cyanobacterial sequences. Sequences similar to the uncharacterized ORF and Xis elements are found in other Beggiatoaceae genomes, a variety of cyanobacteria, and a few phylogenetically dispersed pleiomorphic or filamentous bacteria. We speculate that elements shared among filamentous bacterial species may have been exchanged in microbial mats and that some of them may be involved in cell differentiation.

Microbial life associated with low-temperature alteration of ultramafic rocks in the Leka ophiolite complex

Water-rock interactions in ultramafic lithosphere generate reduced chemical species such as hydrogen that can fuel subsurface microbial communities. Sampling of this environment is expensive and technically demanding. However, highly accessible, uplifted oceanic lithospheres emplaced onto continental margins (ophiolites) are potential model systems for studies of the subsurface biosphere in ultramafic rocks. Here, we describe a microbiological investigation of partially serpentinized dunite from the Leka ophiolite (Norway). We analysed samples of mineral coatings on subsurface fracture surfaces from different depths (10-160 cm) and groundwater from a 50-m-deep borehole that penetrates several major fracture zones in the rock. The samples are suggested to represent subsurface habitats ranging from highly anaerobic to aerobic conditions. Water from a surface pond was analysed for comparison. To explore the microbial diversity and to make assessments about potential metabolisms, the samples were analysed by microscopy, construction of small subunit ribosomal RNA gene clone libraries, culturing and quantitative-PCR. Different microbial communities were observed in the groundwater, the fracture-coating material and the surface water, indicating that distinct microbial ecosystems exist in the rock. Close relatives of hydrogen-oxidizing Hydrogenophaga dominated (30% of the bacterial clones) in the oxic groundwater, indicating that microbial communities in ultramafic rocks at Leka could partially be driven by H2 produced by low-temperature water-rock reactions. Heterotrophic organisms, including close relatives of hydrocarbon degraders possibly feeding on products from Fischer-Tropsch-type reactions, dominated in the fracture-coating material. Putative hydrogen-, ammonia-, manganese- and iron-oxidizers were also detected in fracture coatings and the groundwater. The microbial communities reflect the existence of different subsurface redox conditions generated by differences in fracture size and distribution, and mixing of fluids. The particularly dense microbial communities in the shallow fracture coatings seem to be fuelled by both photosynthesis and oxidation of reduced chemical species produced by water-rock reactions.

High and stable substrate specificities of microorganisms in enhanced biological phosphorus removal plants

Microbial communities are typically characterized by conditions of nutrient limitation so the availability of the resources is likely a key factor in the niche differentiation across all species and in the regulation of the community structure. In this study we have investigated whether four species exhibit any in situ short-term changes in substrate uptake pattern when exposed to variations in substrate and growth conditions. Microautoradiography was combined with fluorescence in situ hybridization to investigate in situ cell-specific substrate uptake profiles of four probe-defined coexisting species in a wastewater treatment plant with enhanced biological phosphorus removal. These were the filamentous 'Candidatus Microthrix' and Caldilinea (type 0803), the polyphosphate-accumulating organism 'Candidatus Accumulibacter', and the denitrifying Azoarcus. The experimental conditions mimicked the conditions potentially encountered in the respective environment (starvation, high/low substrate concentration, induction with specific substrates, and single/multiple substrates). The results showed that each probe-defined species exhibited very distinct and constant substrate uptake profile in time and space, which hardly changed under any of the conditions tested. Such niche partitioning implies that a significant change in substrate composition will be reflected in a changed community structure rather than the substrate uptake response from the different species.

Control filamentous bulking caused by chlorine-resistant Type 021N bacteria through adding a biocide CTAB

Filamentous bulking sludge due to excessive growth of filamentous bacteria is a serious operational problem in activated sludge plants. The addition of chemicals is one of widespread ways to control filamentous bulking. In this study, filamentous bulking in a continuous activated sludge system was found to be mainly caused by Eikelboom Type 021N filamentous bacteria likely due to low substrate concentration gradients. These Type 021N bacteria were found to be resistant to chlorination, maintaining cell integrity at a dosage of up to 80 mg Cl/gSS. An alternative biocidal agent, cetyltrimethyl ammonium bromide (CTAB), exhibited a much stronger biocidal effect on these filaments, which significantly improved sludge settleability. Type 021N with filamentous index of 5 was selectively killed, but floc-formers recovery their activity after CTAB termination. The study implied that CTAB might have more penetration capacity to cell wall of chlorine-resistant Type 021N bacteria. We therefore suggest the penetration property of filament cell wall should be considered or tested before the selection of biocide type in practice.

Population dynamics of filamentous bacteria in Danish wastewater treatment plants with nutrient removal

Bulking and foaming are two frequently occurring operational problems in activated sludge wastewater treatment plants, and these problems are mainly associated with excessive growth of filamentous bacteria. In this study, a comprehensive investigation of the identity and population dynamics of filamentous bacteria in 28 Danish municipal treatment plants with nutrient removal has been carried out over three years. Fluorescence in situ hybridization was applied to quantify more than twenty probe-defined populations of filamentous bacteria that in total constituted a large fraction of the entire microbial community, on average 24%. Despite the majority being present within the flocs, they occasionally caused settling problems in most of the plants. A low diversity of probe-defined filamentous bacteria was found in the plants with Microthrix and various species belonging to phylum Chloroflexi (e.g., type 0803 and type 0092) as the most abundant. Few other filamentous probe-defined species were found revealing a large similarity between the filamentous populations in the plants investigated. The composition of filamentous populations was stable in each plant with only minor changes in relative abundances observed during the three-year study period. The relative composition of the different species was unique to each plant giving a characteristic "fingerprint". Comprehensive statistical analyses of the presence and abundance of the filamentous organisms did not reveal many correlations with a particular plant design or process parameter.

Stable limited filamentous bulking through keeping the competition between floc-formers and filaments in balance

Limited filamentous bulking (LFB) was proposed to save aeration energy consumption and enhance the capacity of filaments to degrade substrates with low concentrations in activated sludge systems. Operational parameters favorable for maintaining the LFB state were investigated in an anoxic-oxic reactor treating domestic wastewater. The experiments showed that the LFB state would deteriorate with sharply decreasing temperature, reducing substrate gradients or removing anoxic zones. The balance between filaments and floc-formers could be achieved by controlling dissolved oxygen and sludge loading rates to be in optimal ranges. Eikelboom Type 0041 and CandidatusMicrothrix parvicella were the filamentous bacteria responsible for the LFB state. However, the excess growth of Eikelboom Type 021N and Sphaerotilus natans were observed when serious bulking occurred under low substrate gradients. It was demonstrated that stable maintenance of LFB for energy saving was feasible by process control and optimization.

Microbial communities involved in enhanced biological phosphorus removal from wastewater--a model system in environmental biotechnology

Enhanced biological phosphorus removal (EBPR) is one of the most advanced and complicated wastewater treatment processes applied today, and it is becoming increasingly popular worldwide as a sustainable way to remove and potentially reuse P. It is carried out by complex microbial communities consisting primarily of uncultured microorganisms. The EBPR process is a well-studied system with clearly defined boundaries which makes it very suitable as a model ecosystem in microbial ecology. Of particular importance are the transformations of C, N, and P, the solid-liquid separation properties and the functional and structural stability. A range of modern molecular methods has been used to study these communities in great detail including single cell microbiology, various -omics methods, flux analyses, and modeling making this one of the best studied microbial ecosystems so far. Recently, an EBPR core microbiome has been described and we present in this article some highlights and show how this complex microbial community can be used as model ecosystem in environmental biotechnology.

Fine-scale bacterial community dynamics and the taxa-time relationship within a full-scale activated sludge bioreactor

In activated sludge bioreactors, aerobic heterotrophic communities efficiently remove organics, nutrients, toxic substances, and pathogens from wastewater, but the dynamics of these communities are as yet poorly understood. A macroecology metric used to quantify community shifts is the taxa-time relationship, a temporal analog of the species-area curve. To determine whether this metric can be applied to full-scale bioreactors, activated sludge samples were collected weekly over a one-year period at a local municipal wastewater treatment plant. Bacterial community dynamics were evaluated by monitoring 16S rRNA genes using Terminal Restriction Fragment Length Polymorphism (T-RFLP), corroborated by clone libraries. Observed taxa richness increased with time according to a power law model, as predicted by macroecological theory, with a power law exponent of w = 0.209. The results reveal strong long-term temporal dynamics during a period of stable performance (BOD removal and nitrification). Community dynamics followed a gradual succession away from initial conditions rather than periodicity around a mean "equilibrium", with greater within-month then among-month community similarities. Changes in community structure were significantly associated via multivariate statistical analyses with dissolved oxygen, temperature, influent silver, biomass (MLSS), flow rate, and influent nitrite, cadmium and chromium concentrations. Overall, our results suggest patterns of bacterial community dynamics likely regulated in part by operational parameters and provide evidence that the taxa-time relationship may be a fundamental ecological pattern in macro- and microbial systems.

Effect of dissolved oxygen changes on activated sludge fungal bulking during lab-scale treatment of acidic industrial wastewater

The cloning and sequencing of fungal 18S rRNA genes followed by the identification of filamentous fungal species by fluorescent in situ hybridization (FISH) and the enumeration of filamentous fungal cells by flow cytometry-FISH (FC-FISH) were used to investigate the effect of dissolved oxygen (DO) changes on activated sludge (AS) fungal bulking during a lab-scale treatment of acidic industrial wastewater. By increasing DO levels from < .5 to > 2 mg L⁻¹, bulking started to occur due to the outbreak of fungal filaments, whereas the chemical oxygen demand (COD) removals sharply increased from < 40 to > 70%. Clone library analyses revealed that all clonal fungal sequences were of yeast origin, and that only one and four yeast species were individually detected in AS at two DO levels. Subsequent FISH identification of filamentous yeast species within bulking sludge using self-designed oligonucleotide probes suggested that all probe-reactive cells of Trichosporon asahii had a filamentous morphology and were the dominating filamentous microorganism in the AS. The FC-FISH analyses of bacteria and two main yeast species showed that the DO shift resulted in a sharp increase of T. asahii, by a factor of 48-60, which caused filamentous yeast bulking. Subsequently, the restoration of DO levels to <0.5 mg L⁻¹ effectively restored the sludge settlement and yeast community, as well as unacceptable COD removals.

Emergent multicellular life cycles in filamentous bacteria owing to density-dependent population dynamics

Filamentous bacteria are the oldest and simplest known multicellular life forms. By using computer simulations and experiments that address cell division in a filamentous context, we investigate some of the ecological factors that can lead to the emergence of a multicellular life cycle in filamentous life forms. The model predicts that if cell division and death rates are dependent on the density of cells in a population, a predictable cycle between short and long filament lengths is produced. During exponential growth, there will be a predominance of multicellular filaments, while at carrying capacity, the population converges to a predominance of short filaments and single cells. Model predictions are experimentally tested and confirmed in cultures of heterotrophic and phototrophic bacterial species. Furthermore, by developing a formulation of generation time in bacterial populations, it is shown that changes in generation time can alter length distributions. The theory predicts that given the same population growth curve and fitness, species with longer generation times have longer filaments during comparable population growth phases. Characterization of the environmental dependence of morphological properties such as length, and the number of cells per filament, helps in understanding the pre-existing conditions for the evolution of developmental cycles in simple multicellular organisms. Moreover, the theoretical prediction that strains with the same fitness can exhibit different lengths at comparable growth phases has important implications. It demonstrates that differences in fitness attributed to morphology are not the sole explanation for the evolution of life cycles dominated by multicellularity.

Characterization of the genome of the polyvalent lytic bacteriophage GTE2, which has potential for biocontrol of Gordonia-, Rhodococcus-, and Nocardia-stabilized foams in activated sludge plants

Hydrophobic Actinobacteria are commonly associated with the stabilization of foams in activated sludge systems. One possible attractive approach to control these foam-stabilizing organisms is the use of specific bacteriophages. We describe the genome characterization of a novel polyvalent DNA phage, GTE2, isolated from activated sludge. This phage is lytic for Gordonia terrae, Rhodococcus globerulus, Rhodococcus erythropolis, Rhodococcus erythropolis, Nocardia otitidiscaviarum, and Nocardia brasiliensis. Phage GTE2 belongs to the family Siphoviridae, possessing a characteristic icosahedral head encapsulating a double-stranded DNA linear genome (45,530 bp) having 10-bp 3'-protruding cohesive ends. The genome sequence is 98% unique at the DNA level and contains 57 putative genes. The genome can be divided into two components, where the first is modular and encodes phage structural proteins and lysis genes. The second is not modular, and the genes harbored there are involved in DNA replication, repair, and metabolism. Some have no known function. GTE2 shows promising results in controlling stable foam production by its host bacteria under laboratory conditions, suggesting that it may prove useful in the field as a biocontrol agent.

The activated sludge bulking filament Eikelboom morphotype 0914 is a member of the Chloroflexi

The filamentous bacterium Eikelboom morphotype type 0914 responsible for bulking in activated sludge plants is identified here for the first time as a member of the phylum Chloroflexi subgroup 1. Two FISH probes, CFX67a and CFX67b, targeting the 16S rRNA sequences of this filament morphotype were designed, validated and used successfully for its in situ identification. A survey of plants in eastern Australia with the CFX67a probe showed it targeted only the type 0914 morphotype that was common especially in long sludge age plants designed to remove phosphorus and nitrogen microbiologically, although being in very low abundance in many samples. Filaments responding to the CFX67b probe also exhibited the type 0914 morphology but were less frequent, although again occurring in similarly configured plants. All these filaments showed an uneven FISH signal suggesting their ribosomes are localized at the ends of their cells. Furthermore, some generated distinctive FISH signals in all biomass samples containing them, where only certain cells within any single trichome fluoresced with probes designed against different target sites. Helper probes for each of these were required before all cells fluoresced above the visual detection limits of FISH.

Eikelboom's morphotype 0803 in activated sludge belongs to the genus Caldilinea in the phylum Chloroflexi

Micromanipulated filamentous bacteria from bulking and foaming activated sludge morphologically identified as Eikelboom type 0803 were shown to be affiliated to the genus Caldilinea within the phylum Chloroflexi. Specific FISH probes were designed for their in situ detection and quantification in seven Danish wastewater treatment plants with biological nutrient removal. The survey applied all species-specific probes for Chloroflexi of relevance in activated sludge treatment plants as well as the phylum-specific probes. Type 0803 filaments constituted around 20% of the total Chloroflexi population. In four of the treatment plants, type 0803 and type 0092 co-occurred and were the dominating fraction of the Chloroflexi population. In the other plants, most Chloroflexi could not be identified beyond the phylum level, suggesting a yet far larger diversity. On average, for all plants, the total Chloroflexi population constituted 12% of the entire microbial population and seems to play an important structural role in the sludge floc formation. Ecophysiological characterization of type 0803 showed their potential role in macromolecule conversion as evident by high levels of exoenzyme expression. Acetate was not consumed. Glucose was consumed with oxygen, nitrite and nitrite as electron acceptors, suggesting that type 0803 may be a denitrifier. Their surfaces were hydrophobic, explaining their occasional occurrence in foaming incidents.

Ecophysiology of uncultured filamentous anaerobes belonging to the phylum KSB3 that cause bulking in methanogenic granular sludge

A filamentous bulking of a methanogenic granular sludge caused by uncultured filamentous bacteria of the candidate phylum KSB3 in an upflow anaerobic sludge blanket (UASB) system has been reported. To characterize the physiological traits of the filaments, a polyphasic approach consisting of rRNA-based activity monitoring of the KSB3 filaments using the RNase H method and substrate uptake profiling using microautoradiography combined with fluorescence in situ hybridization (MAR-FISH) was conducted. On the basis of rRNA-based activity, the monitoring of a full-scale UASB reactor operated continuously revealed that KSB3 cells became active and predominant (up to 54% of the total 16S rRNA) in the sludge when the carbohydrate loading to the system increased. Batch experiments with a short incubation of the sludge with maltose, glucose, fructose, and maltotriose at relatively low concentrations (approximately 0.1 mM) in the presence of yeast extract also showed an increase in KSB3 rRNA levels under anaerobic conditions. MAR-FISH confirmed that the KSB3 cells took up radioisotopic carbons from [(14)C]maltose and [(14)C]glucose under the same incubation conditions in the batch experiments. These results suggest that one of the important ecophysiological characteristics of KSB3 cells in the sludge is carbohydrate degradation in wastewater and that high carbohydrate loadings may trigger an outbreak of KSB3 bacteria, causing sludge bulking in UASB systems.

A conceptual ecosystem model of microbial communities in enhanced biological phosphorus removal plants

The microbial populations in 25 full-scale activated sludge wastewater treatment plants with enhanced biological phosphorus removal (EBPR plants) have been intensively studied over several years. Most of the important bacterial groups involved in nitrification, denitrification, biological P removal, fermentation, and hydrolysis have been identified and quantified using quantitative culture-independent molecular methods. Surprisingly, a limited number of core species was present in all plants, constituting on average approx. 80% of the entire communities in the plants, showing that the microbial populations in EBPR plants are rather similar and not very diverse, as sometimes suggested. By focusing on these organisms it is possible to make a comprehensive ecosystem model, where many important aspects in relation to microbial ecosystems and wastewater treatment can be investigated. We have reviewed the current knowledge about these microorganisms with focus on key ecophysiological factors and combined this into a conceptual ecosystem model for EBPR plants. It includes the major pathways of carbon flow with specific organic substances, the dominant populations involved in the transformations, interspecies interactions, and the key factors controlling their presence and activity. We believe that the EBPR process is a perfect model system for studies of microbial ecology in water engineering systems and that this conceptual model can be used for proposing and testing theories based on microbial ecosystem theories, for the development of new and improved quantitative ecosystem models and is beneficial for future design and management of wastewater treatment systems.

Yeast flocculation and its biotechnological relevance

Adhesion properties of microorganisms are crucial for many essential biological processes such as sexual reproduction, tissue or substrate invasion, biofilm formation and others. Most, if not all microbial adhesion phenotypes are controlled by factors such as nutrient availability or the presence of pheromones. One particular form of controlled cellular adhesion that occurs in liquid environments is a process of asexual aggregation of cells which is also referred to as flocculation. This process has been the subject of significant scientific and biotechnological interest because of its relevance for many industrial fermentation processes. Specifically adjusted flocculation properties of industrial microorganisms could indeed lead to significant improvements in the processing of biotechnological fermentation products such as foods, biofuels and industrially produced peptides. This review briefly summarises our current scientific knowledge on the regulation of flocculation-related phenotypes, their importance for different biotechnological industries, and possible future applications for microorganisms with improved flocculation properties.

Bacterial community analysis of activated sludge: an evaluation of four commonly used DNA extraction methods

The effectiveness of three commercially available direct DNA isolation kits (Mobio, Fast, Qiagen) and one published direct DNA extraction protocol (Bead) for extracting bacterial DNA from different types of activated sludge was investigated and mutually compared. The DNA quantity and purity were determined using real-time PCR targeting the bacterial 16S rDNA gene. Microbial community fingerprints were assessed by automated ribosomal intergenic spacer analysis. The resulting community profiles were analyzed with canonical correspondence analysis. Our results clearly demonstrate that direct DNA extraction methods can significantly influence the DNA quantity, purity, and observed community patterns of microbiota in activated sludge. Fast and Mobio generated high amounts of good quality DNA compared to Bead and Qiagen. Mobio also resulted in the detection of the highest number of species while Fast scored the best in discriminating between the community patterns of different activated sludge types. With respect to the characterization of community profiles, our analyses demonstrated a strong sludge type dependent variability among methods. Taking into account our results, we recommend Fast as the most suitable DNA extraction method for activated sludge samples used for bacterial community studies.

Filamentous members of cluster III Defluviicoccus have the in situ phenotype expected of a glycogen-accumulating organism in activated sludge

The in situ ecophysiology of alphaproteobacterial filamentous Cluster III Defluviicoccus present in enhanced biological phosphorus removal (EBPR)-activated sludge systems was evaluated using FISH-MAR and histochemical staining methods. These organisms, sharing the Nostocoida limicola morphotype, are known to be responsible for serious episodes of activated sludge bulking. The data presented here also demonstrate an ability to assimilate short-chain fatty acids and synthesize poly-β-hydroxyalkanoates (PHA) anaerobically, and then utilize this stored PHA under aerobic conditions, but with no corresponding synthesis of polyphosphate. These features are consistent with an in situ phenotype of glycogen-accumulating organisms (GAO), populations thought to lower the efficiency of EBPR systems by outcompeting polyphosphate-accumulating organisms (PAO) for substrates in their anaerobic feed phase. Survey data indicate that these GAO are as commonly seen as the known PAO in full-scale EBPR-activated sludge systems, which suggest that they might play important roles there, and therefore should not be viewed just as laboratory curiosities.